linux/kernel/seccomp.c

2465 lines
63 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/kernel/seccomp.c
*
* Copyright 2004-2005 Andrea Arcangeli <andrea@cpushare.com>
*
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
* Copyright (C) 2012 Google, Inc.
* Will Drewry <wad@chromium.org>
*
* This defines a simple but solid secure-computing facility.
*
* Mode 1 uses a fixed list of allowed system calls.
* Mode 2 allows user-defined system call filters in the form
* of Berkeley Packet Filters/Linux Socket Filters.
*/
#define pr_fmt(fmt) "seccomp: " fmt
#include <linux/refcount.h>
#include <linux/audit.h>
x86-64: seccomp: fix 32/64 syscall hole On x86-64, a 32-bit process (TIF_IA32) can switch to 64-bit mode with ljmp, and then use the "syscall" instruction to make a 64-bit system call. A 64-bit process make a 32-bit system call with int $0x80. In both these cases under CONFIG_SECCOMP=y, secure_computing() will use the wrong system call number table. The fix is simple: test TS_COMPAT instead of TIF_IA32. Here is an example exploit: /* test case for seccomp circumvention on x86-64 There are two failure modes: compile with -m64 or compile with -m32. The -m64 case is the worst one, because it does "chmod 777 ." (could be any chmod call). The -m32 case demonstrates it was able to do stat(), which can glean information but not harm anything directly. A buggy kernel will let the test do something, print, and exit 1; a fixed kernel will make it exit with SIGKILL before it does anything. */ #define _GNU_SOURCE #include <assert.h> #include <inttypes.h> #include <stdio.h> #include <linux/prctl.h> #include <sys/stat.h> #include <unistd.h> #include <asm/unistd.h> int main (int argc, char **argv) { char buf[100]; static const char dot[] = "."; long ret; unsigned st[24]; if (prctl (PR_SET_SECCOMP, 1, 0, 0, 0) != 0) perror ("prctl(PR_SET_SECCOMP) -- not compiled into kernel?"); #ifdef __x86_64__ assert ((uintptr_t) dot < (1UL << 32)); asm ("int $0x80 # %0 <- %1(%2 %3)" : "=a" (ret) : "0" (15), "b" (dot), "c" (0777)); ret = snprintf (buf, sizeof buf, "result %ld (check mode on .!)\n", ret); #elif defined __i386__ asm (".code32\n" "pushl %%cs\n" "pushl $2f\n" "ljmpl $0x33, $1f\n" ".code64\n" "1: syscall # %0 <- %1(%2 %3)\n" "lretl\n" ".code32\n" "2:" : "=a" (ret) : "0" (4), "D" (dot), "S" (&st)); if (ret == 0) ret = snprintf (buf, sizeof buf, "stat . -> st_uid=%u\n", st[7]); else ret = snprintf (buf, sizeof buf, "result %ld\n", ret); #else # error "not this one" #endif write (1, buf, ret); syscall (__NR_exit, 1); return 2; } Signed-off-by: Roland McGrath <roland@redhat.com> [ I don't know if anybody actually uses seccomp, but it's enabled in at least both Fedora and SuSE kernels, so maybe somebody is. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-28 07:25:54 +00:00
#include <linux/compat.h>
#include <linux/coredump.h>
#include <linux/kmemleak.h>
#include <linux/nospec.h>
#include <linux/prctl.h>
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
#include <linux/sched.h>
#include <linux/sched/task_stack.h>
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
#include <linux/seccomp.h>
#include <linux/slab.h>
#include <linux/syscalls.h>
#include <linux/sysctl.h>
/* Not exposed in headers: strictly internal use only. */
#define SECCOMP_MODE_DEAD (SECCOMP_MODE_FILTER + 1)
#ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
#include <asm/syscall.h>
#endif
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
#ifdef CONFIG_SECCOMP_FILTER
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
#include <linux/file.h>
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
#include <linux/filter.h>
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
#include <linux/pid.h>
ptrace,seccomp: Add PTRACE_SECCOMP support This change adds support for a new ptrace option, PTRACE_O_TRACESECCOMP, and a new return value for seccomp BPF programs, SECCOMP_RET_TRACE. When a tracer specifies the PTRACE_O_TRACESECCOMP ptrace option, the tracer will be notified, via PTRACE_EVENT_SECCOMP, for any syscall that results in a BPF program returning SECCOMP_RET_TRACE. The 16-bit SECCOMP_RET_DATA mask of the BPF program return value will be passed as the ptrace_message and may be retrieved using PTRACE_GETEVENTMSG. If the subordinate process is not using seccomp filter, then no system call notifications will occur even if the option is specified. If there is no tracer with PTRACE_O_TRACESECCOMP when SECCOMP_RET_TRACE is returned, the system call will not be executed and an -ENOSYS errno will be returned to userspace. This change adds a dependency on the system call slow path. Any future efforts to use the system call fast path for seccomp filter will need to address this restriction. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Eric Paris <eparis@redhat.com> v18: - rebase - comment fatal_signal check - acked-by - drop secure_computing_int comment v17: - ... v16: - update PT_TRACE_MASK to 0xbf4 so that STOP isn't clear on SETOPTIONS call (indan@nul.nu) [note PT_TRACE_MASK disappears in linux-next] v15: - add audit support for non-zero return codes - clean up style (indan@nul.nu) v14: - rebase/nochanges v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc (Brings back a change to ptrace.c and the masks.) v12: - rebase to linux-next - use ptrace_event and update arch/Kconfig to mention slow-path dependency - drop all tracehook changes and inclusion (oleg@redhat.com) v11: - invert the logic to just make it a PTRACE_SYSCALL accelerator (indan@nul.nu) v10: - moved to PTRACE_O_SECCOMP / PT_TRACE_SECCOMP v9: - n/a v8: - guarded PTRACE_SECCOMP use with an ifdef v7: - introduced Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:48:02 +00:00
#include <linux/ptrace.h>
#include <linux/capability.h>
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
#include <linux/uaccess.h>
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
#include <linux/anon_inodes.h>
#include <linux/lockdep.h>
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
/*
* When SECCOMP_IOCTL_NOTIF_ID_VALID was first introduced, it had the
* wrong direction flag in the ioctl number. This is the broken one,
* which the kernel needs to keep supporting until all userspaces stop
* using the wrong command number.
*/
#define SECCOMP_IOCTL_NOTIF_ID_VALID_WRONG_DIR SECCOMP_IOR(2, __u64)
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
enum notify_state {
SECCOMP_NOTIFY_INIT,
SECCOMP_NOTIFY_SENT,
SECCOMP_NOTIFY_REPLIED,
};
struct seccomp_knotif {
/* The struct pid of the task whose filter triggered the notification */
struct task_struct *task;
/* The "cookie" for this request; this is unique for this filter. */
u64 id;
/*
* The seccomp data. This pointer is valid the entire time this
* notification is active, since it comes from __seccomp_filter which
* eclipses the entire lifecycle here.
*/
const struct seccomp_data *data;
/*
* Notification states. When SECCOMP_RET_USER_NOTIF is returned, a
* struct seccomp_knotif is created and starts out in INIT. Once the
* handler reads the notification off of an FD, it transitions to SENT.
* If a signal is received the state transitions back to INIT and
* another message is sent. When the userspace handler replies, state
* transitions to REPLIED.
*/
enum notify_state state;
/* The return values, only valid when in SECCOMP_NOTIFY_REPLIED */
int error;
long val;
seccomp: add SECCOMP_USER_NOTIF_FLAG_CONTINUE This allows the seccomp notifier to continue a syscall. A positive discussion about this feature was triggered by a post to the ksummit-discuss mailing list (cf. [3]) and took place during KSummit (cf. [1]) and again at the containers/checkpoint-restore micro-conference at Linux Plumbers. Recently we landed seccomp support for SECCOMP_RET_USER_NOTIF (cf. [4]) which enables a process (watchee) to retrieve an fd for its seccomp filter. This fd can then be handed to another (usually more privileged) process (watcher). The watcher will then be able to receive seccomp messages about the syscalls having been performed by the watchee. This feature is heavily used in some userspace workloads. For example, it is currently used to intercept mknod() syscalls in user namespaces aka in containers. The mknod() syscall can be easily filtered based on dev_t. This allows us to only intercept a very specific subset of mknod() syscalls. Furthermore, mknod() is not possible in user namespaces toto coelo and so intercepting and denying syscalls that are not in the whitelist on accident is not a big deal. The watchee won't notice a difference. In contrast to mknod(), a lot of other syscall we intercept (e.g. setxattr()) cannot be easily filtered like mknod() because they have pointer arguments. Additionally, some of them might actually succeed in user namespaces (e.g. setxattr() for all "user.*" xattrs). Since we currently cannot tell seccomp to continue from a user notifier we are stuck with performing all of the syscalls in lieu of the container. This is a huge security liability since it is extremely difficult to correctly assume all of the necessary privileges of the calling task such that the syscall can be successfully emulated without escaping other additional security restrictions (think missing CAP_MKNOD for mknod(), or MS_NODEV on a filesystem etc.). This can be solved by telling seccomp to resume the syscall. One thing that came up in the discussion was the problem that another thread could change the memory after userspace has decided to let the syscall continue which is a well known TOCTOU with seccomp which is present in other ways already. The discussion showed that this feature is already very useful for any syscall without pointer arguments. For any accidentally intercepted non-pointer syscall it is safe to continue. For syscalls with pointer arguments there is a race but for any cautious userspace and the main usec cases the race doesn't matter. The notifier is intended to be used in a scenario where a more privileged watcher supervises the syscalls of lesser privileged watchee to allow it to get around kernel-enforced limitations by performing the syscall for it whenever deemed save by the watcher. Hence, if a user tricks the watcher into allowing a syscall they will either get a deny based on kernel-enforced restrictions later or they will have changed the arguments in such a way that they manage to perform a syscall with arguments that they would've been allowed to do anyway. In general, it is good to point out again, that the notifier fd was not intended to allow userspace to implement a security policy but rather to work around kernel security mechanisms in cases where the watcher knows that a given action is safe to perform. /* References */ [1]: https://linuxplumbersconf.org/event/4/contributions/560 [2]: https://linuxplumbersconf.org/event/4/contributions/477 [3]: https://lore.kernel.org/r/20190719093538.dhyopljyr5ns33qx@brauner.io [4]: commit 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> CC: Tyler Hicks <tyhicks@canonical.com> Link: https://lore.kernel.org/r/20190920083007.11475-2-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2019-09-20 08:30:05 +00:00
u32 flags;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
/*
* Signals when this has changed states, such as the listener
* dying, a new seccomp addfd message, or changing to REPLIED
*/
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
struct completion ready;
struct list_head list;
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
/* outstanding addfd requests */
struct list_head addfd;
};
/**
* struct seccomp_kaddfd - container for seccomp_addfd ioctl messages
*
* @file: A reference to the file to install in the other task
* @fd: The fd number to install it at. If the fd number is -1, it means the
* installing process should allocate the fd as normal.
* @flags: The flags for the new file descriptor. At the moment, only O_CLOEXEC
* is allowed.
seccomp: Support atomic "addfd + send reply" Alban Crequy reported a race condition userspace faces when we want to add some fds and make the syscall return them[1] using seccomp notify. The problem is that currently two different ioctl() calls are needed by the process handling the syscalls (agent) for another userspace process (target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible for the agent to do the first ioctl to add a file descriptor but the target is interrupted (EINTR) before the agent does the second ioctl() call. This patch adds a flag to the ADDFD ioctl() so it adds the fd and returns that value atomically to the target program, as suggested by Kees Cook[2]. This is done by simply allowing seccomp_do_user_notification() to add the fd and return it in this case. Therefore, in this case the target wakes up from the wait in seccomp_do_user_notification() either to interrupt the syscall or to add the fd and return it. This "allocate an fd and return" functionality is useful for syscalls that return a file descriptor only, like connect(2). Other syscalls that return a file descriptor but not as return value (or return more than one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not work with this flag. This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's return value, nor error can be set by the user. Upon successful invocation of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND flag, the notifying process's errno will be 0, and the return value will be the file descriptor number that was installed. [1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/ Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io> Signed-off-by: Sargun Dhillon <sargun@sargun.me> Acked-by: Tycho Andersen <tycho@tycho.pizza> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
* @ioctl_flags: The flags used for the seccomp_addfd ioctl.
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
* @ret: The return value of the installing process. It is set to the fd num
* upon success (>= 0).
* @completion: Indicates that the installing process has completed fd
* installation, or gone away (either due to successful
* reply, or signal)
*
*/
struct seccomp_kaddfd {
struct file *file;
int fd;
unsigned int flags;
seccomp: Support atomic "addfd + send reply" Alban Crequy reported a race condition userspace faces when we want to add some fds and make the syscall return them[1] using seccomp notify. The problem is that currently two different ioctl() calls are needed by the process handling the syscalls (agent) for another userspace process (target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible for the agent to do the first ioctl to add a file descriptor but the target is interrupted (EINTR) before the agent does the second ioctl() call. This patch adds a flag to the ADDFD ioctl() so it adds the fd and returns that value atomically to the target program, as suggested by Kees Cook[2]. This is done by simply allowing seccomp_do_user_notification() to add the fd and return it in this case. Therefore, in this case the target wakes up from the wait in seccomp_do_user_notification() either to interrupt the syscall or to add the fd and return it. This "allocate an fd and return" functionality is useful for syscalls that return a file descriptor only, like connect(2). Other syscalls that return a file descriptor but not as return value (or return more than one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not work with this flag. This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's return value, nor error can be set by the user. Upon successful invocation of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND flag, the notifying process's errno will be 0, and the return value will be the file descriptor number that was installed. [1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/ Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io> Signed-off-by: Sargun Dhillon <sargun@sargun.me> Acked-by: Tycho Andersen <tycho@tycho.pizza> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
__u32 ioctl_flags;
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
union {
bool setfd;
/* To only be set on reply */
int ret;
};
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
struct completion completion;
struct list_head list;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
};
/**
* struct notification - container for seccomp userspace notifications. Since
* most seccomp filters will not have notification listeners attached and this
* structure is fairly large, we store the notification-specific stuff in a
* separate structure.
*
* @request: A semaphore that users of this notification can wait on for
* changes. Actual reads and writes are still controlled with
* filter->notify_lock.
* @next_id: The id of the next request.
* @notifications: A list of struct seccomp_knotif elements.
*/
struct notification {
struct semaphore request;
u64 next_id;
struct list_head notifications;
};
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
seccomp/cache: Lookup syscall allowlist bitmap for fast path The overhead of running Seccomp filters has been part of some past discussions [1][2][3]. Oftentimes, the filters have a large number of instructions that check syscall numbers one by one and jump based on that. Some users chain BPF filters which further enlarge the overhead. A recent work [6] comprehensively measures the Seccomp overhead and shows that the overhead is non-negligible and has a non-trivial impact on application performance. We observed some common filters, such as docker's [4] or systemd's [5], will make most decisions based only on the syscall numbers, and as past discussions considered, a bitmap where each bit represents a syscall makes most sense for these filters. The fast (common) path for seccomp should be that the filter permits the syscall to pass through, and failing seccomp is expected to be an exceptional case; it is not expected for userspace to call a denylisted syscall over and over. When it can be concluded that an allow must occur for the given architecture and syscall pair (this determination is introduced in the next commit), seccomp will immediately allow the syscall, bypassing further BPF execution. Each architecture number has its own bitmap. The architecture number in seccomp_data is checked against the defined architecture number constant before proceeding to test the bit against the bitmap with the syscall number as the index of the bit in the bitmap, and if the bit is set, seccomp returns allow. The bitmaps are all clear in this patch and will be initialized in the next commit. When only one architecture exists, the check against architecture number is skipped, suggested by Kees Cook [7]. [1] https://lore.kernel.org/linux-security-module/c22a6c3cefc2412cad00ae14c1371711@huawei.com/T/ [2] https://lore.kernel.org/lkml/202005181120.971232B7B@keescook/T/ [3] https://github.com/seccomp/libseccomp/issues/116 [4] https://github.com/moby/moby/blob/ae0ef82b90356ac613f329a8ef5ee42ca923417d/profiles/seccomp/default.json [5] https://github.com/systemd/systemd/blob/6743a1caf4037f03dc51a1277855018e4ab61957/src/shared/seccomp-util.c#L270 [6] Draco: Architectural and Operating System Support for System Call Security https://tianyin.github.io/pub/draco.pdf, MICRO-53, Oct. 2020 [7] https://lore.kernel.org/bpf/202010091614.8BB0EB64@keescook/ Co-developed-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu> Signed-off-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu> Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu> Reviewed-by: Jann Horn <jannh@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/10f91a367ec4fcdea7fc3f086de3f5f13a4a7436.1602431034.git.yifeifz2@illinois.edu
2020-10-11 15:47:42 +00:00
#ifdef SECCOMP_ARCH_NATIVE
/**
* struct action_cache - per-filter cache of seccomp actions per
* arch/syscall pair
*
* @allow_native: A bitmap where each bit represents whether the
* filter will always allow the syscall, for the
* native architecture.
* @allow_compat: A bitmap where each bit represents whether the
* filter will always allow the syscall, for the
* compat architecture.
*/
struct action_cache {
DECLARE_BITMAP(allow_native, SECCOMP_ARCH_NATIVE_NR);
#ifdef SECCOMP_ARCH_COMPAT
DECLARE_BITMAP(allow_compat, SECCOMP_ARCH_COMPAT_NR);
#endif
};
#else
struct action_cache { };
static inline bool seccomp_cache_check_allow(const struct seccomp_filter *sfilter,
const struct seccomp_data *sd)
{
return false;
}
seccomp/cache: Add "emulator" to check if filter is constant allow SECCOMP_CACHE will only operate on syscalls that do not access any syscall arguments or instruction pointer. To facilitate this we need a static analyser to know whether a filter will return allow regardless of syscall arguments for a given architecture number / syscall number pair. This is implemented here with a pseudo-emulator, and stored in a per-filter bitmap. In order to build this bitmap at filter attach time, each filter is emulated for every syscall (under each possible architecture), and checked for any accesses of struct seccomp_data that are not the "arch" nor "nr" (syscall) members. If only "arch" and "nr" are examined, and the program returns allow, then we can be sure that the filter must return allow independent from syscall arguments. Nearly all seccomp filters are built from these cBPF instructions: BPF_LD | BPF_W | BPF_ABS BPF_JMP | BPF_JEQ | BPF_K BPF_JMP | BPF_JGE | BPF_K BPF_JMP | BPF_JGT | BPF_K BPF_JMP | BPF_JSET | BPF_K BPF_JMP | BPF_JA BPF_RET | BPF_K BPF_ALU | BPF_AND | BPF_K Each of these instructions are emulated. Any weirdness or loading from a syscall argument will cause the emulator to bail. The emulation is also halted if it reaches a return. In that case, if it returns an SECCOMP_RET_ALLOW, the syscall is marked as good. Emulator structure and comments are from Kees [1] and Jann [2]. Emulation is done at attach time. If a filter depends on more filters, and if the dependee does not guarantee to allow the syscall, then we skip the emulation of this syscall. [1] https://lore.kernel.org/lkml/20200923232923.3142503-5-keescook@chromium.org/ [2] https://lore.kernel.org/lkml/CAG48ez1p=dR_2ikKq=xVxkoGg0fYpTBpkhJSv1w-6BG=76PAvw@mail.gmail.com/ Suggested-by: Jann Horn <jannh@google.com> Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu> Reviewed-by: Jann Horn <jannh@google.com> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/71c7be2db5ee08905f41c3be5c1ad6e2601ce88f.1602431034.git.yifeifz2@illinois.edu
2020-10-11 15:47:43 +00:00
static inline void seccomp_cache_prepare(struct seccomp_filter *sfilter)
{
}
seccomp/cache: Lookup syscall allowlist bitmap for fast path The overhead of running Seccomp filters has been part of some past discussions [1][2][3]. Oftentimes, the filters have a large number of instructions that check syscall numbers one by one and jump based on that. Some users chain BPF filters which further enlarge the overhead. A recent work [6] comprehensively measures the Seccomp overhead and shows that the overhead is non-negligible and has a non-trivial impact on application performance. We observed some common filters, such as docker's [4] or systemd's [5], will make most decisions based only on the syscall numbers, and as past discussions considered, a bitmap where each bit represents a syscall makes most sense for these filters. The fast (common) path for seccomp should be that the filter permits the syscall to pass through, and failing seccomp is expected to be an exceptional case; it is not expected for userspace to call a denylisted syscall over and over. When it can be concluded that an allow must occur for the given architecture and syscall pair (this determination is introduced in the next commit), seccomp will immediately allow the syscall, bypassing further BPF execution. Each architecture number has its own bitmap. The architecture number in seccomp_data is checked against the defined architecture number constant before proceeding to test the bit against the bitmap with the syscall number as the index of the bit in the bitmap, and if the bit is set, seccomp returns allow. The bitmaps are all clear in this patch and will be initialized in the next commit. When only one architecture exists, the check against architecture number is skipped, suggested by Kees Cook [7]. [1] https://lore.kernel.org/linux-security-module/c22a6c3cefc2412cad00ae14c1371711@huawei.com/T/ [2] https://lore.kernel.org/lkml/202005181120.971232B7B@keescook/T/ [3] https://github.com/seccomp/libseccomp/issues/116 [4] https://github.com/moby/moby/blob/ae0ef82b90356ac613f329a8ef5ee42ca923417d/profiles/seccomp/default.json [5] https://github.com/systemd/systemd/blob/6743a1caf4037f03dc51a1277855018e4ab61957/src/shared/seccomp-util.c#L270 [6] Draco: Architectural and Operating System Support for System Call Security https://tianyin.github.io/pub/draco.pdf, MICRO-53, Oct. 2020 [7] https://lore.kernel.org/bpf/202010091614.8BB0EB64@keescook/ Co-developed-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu> Signed-off-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu> Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu> Reviewed-by: Jann Horn <jannh@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/10f91a367ec4fcdea7fc3f086de3f5f13a4a7436.1602431034.git.yifeifz2@illinois.edu
2020-10-11 15:47:42 +00:00
#endif /* SECCOMP_ARCH_NATIVE */
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
/**
* struct seccomp_filter - container for seccomp BPF programs
*
* @refs: Reference count to manage the object lifetime.
* A filter's reference count is incremented for each directly
* attached task, once for the dependent filter, and if
* requested for the user notifier. When @refs reaches zero,
* the filter can be freed.
seccomp: notify about unused filter We've been making heavy use of the seccomp notifier to intercept and handle certain syscalls for containers. This patch allows a syscall supervisor listening on a given notifier to be notified when a seccomp filter has become unused. A container is often managed by a singleton supervisor process the so-called "monitor". This monitor process has an event loop which has various event handlers registered. If the user specified a seccomp profile that included a notifier for various syscalls then we also register a seccomp notify even handler. For any container using a separate pid namespace the lifecycle of the seccomp notifier is bound to the init process of the pid namespace, i.e. when the init process exits the filter must be unused. If a new process attaches to a container we force it to assume a seccomp profile. This can either be the same seccomp profile as the container was started with or a modified one. If the attaching process makes use of the seccomp notifier we will register a new seccomp notifier handler in the monitor's event loop. However, when the attaching process exits we can't simply delete the handler since other child processes could've been created (daemons spawned etc.) that have inherited the seccomp filter and so we need to keep the seccomp notifier fd alive in the event loop. But this is problematic since we don't get a notification when the seccomp filter has become unused and so we currently never remove the seccomp notifier fd from the event loop and just keep accumulating fds in the event loop. We've had this issue for a while but it has recently become more pressing as more and larger users make use of this. To fix this, we introduce a new "users" reference counter that tracks any tasks and dependent filters making use of a filter. When a notifier is registered waiting tasks will be notified that the filter is now empty by receiving a (E)POLLHUP event. The concept in this patch introduces is the same as for signal_struct, i.e. reference counting for life-cycle management is decoupled from reference counting taks using the object. There's probably some trickery possible but the second counter is just the correct way of doing this IMHO and has precedence. Cc: Tycho Andersen <tycho@tycho.ws> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Denton <mpdenton@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Jann Horn <jannh@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Robert Sesek <rsesek@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Linux Containers <containers@lists.linux-foundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200531115031.391515-3-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31 11:50:30 +00:00
* @users: A filter's @users count is incremented for each directly
* attached task (filter installation, fork(), thread_sync),
* and once for the dependent filter (tracked in filter->prev).
* When it reaches zero it indicates that no direct or indirect
* users of that filter exist. No new tasks can get associated with
* this filter after reaching 0. The @users count is always smaller
* or equal to @refs. Hence, reaching 0 for @users does not mean
* the filter can be freed.
seccomp/cache: Add "emulator" to check if filter is constant allow SECCOMP_CACHE will only operate on syscalls that do not access any syscall arguments or instruction pointer. To facilitate this we need a static analyser to know whether a filter will return allow regardless of syscall arguments for a given architecture number / syscall number pair. This is implemented here with a pseudo-emulator, and stored in a per-filter bitmap. In order to build this bitmap at filter attach time, each filter is emulated for every syscall (under each possible architecture), and checked for any accesses of struct seccomp_data that are not the "arch" nor "nr" (syscall) members. If only "arch" and "nr" are examined, and the program returns allow, then we can be sure that the filter must return allow independent from syscall arguments. Nearly all seccomp filters are built from these cBPF instructions: BPF_LD | BPF_W | BPF_ABS BPF_JMP | BPF_JEQ | BPF_K BPF_JMP | BPF_JGE | BPF_K BPF_JMP | BPF_JGT | BPF_K BPF_JMP | BPF_JSET | BPF_K BPF_JMP | BPF_JA BPF_RET | BPF_K BPF_ALU | BPF_AND | BPF_K Each of these instructions are emulated. Any weirdness or loading from a syscall argument will cause the emulator to bail. The emulation is also halted if it reaches a return. In that case, if it returns an SECCOMP_RET_ALLOW, the syscall is marked as good. Emulator structure and comments are from Kees [1] and Jann [2]. Emulation is done at attach time. If a filter depends on more filters, and if the dependee does not guarantee to allow the syscall, then we skip the emulation of this syscall. [1] https://lore.kernel.org/lkml/20200923232923.3142503-5-keescook@chromium.org/ [2] https://lore.kernel.org/lkml/CAG48ez1p=dR_2ikKq=xVxkoGg0fYpTBpkhJSv1w-6BG=76PAvw@mail.gmail.com/ Suggested-by: Jann Horn <jannh@google.com> Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu> Reviewed-by: Jann Horn <jannh@google.com> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/71c7be2db5ee08905f41c3be5c1ad6e2601ce88f.1602431034.git.yifeifz2@illinois.edu
2020-10-11 15:47:43 +00:00
* @cache: cache of arch/syscall mappings to actions
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for all actions except for SECCOMP_RET_ALLOW for the given filter. SECCOMP_RET_KILL actions are always logged, when "kill" is in the actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged, regardless of this flag. This flag can be used to create noisy filters that result in all non-allowed actions to be logged. A process may have one noisy filter, which is loaded with this flag, as well as a quiet filter that's not loaded with this flag. This allows for the actions in a set of filters to be selectively conveyed to the admin. Since a system could have a large number of allocated seccomp_filter structs, struct packing was taken in consideration. On 64 bit x86, the new log member takes up one byte of an existing four byte hole in the struct. On 32 bit x86, the new log member creates a new four byte hole (unavoidable) and consumes one of those bytes. Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not capable of inspecting the audit log to verify that the actions taken in the filter were logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
* @log: true if all actions except for SECCOMP_RET_ALLOW should be logged
seccomp: Add wait_killable semantic to seccomp user notifier This introduces a per-filter flag (SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV) that makes it so that when notifications are received by the supervisor the notifying process will transition to wait killable semantics. Although wait killable isn't a set of semantics formally exposed to userspace, the concept is searchable. If the notifying process is signaled prior to the notification being received by the userspace agent, it will be handled as normal. One quirk about how this is handled is that the notifying process only switches to TASK_KILLABLE if it receives a wakeup from either an addfd or a signal. This is to avoid an unnecessary wakeup of the notifying task. The reasons behind switching into wait_killable only after userspace receives the notification are: * Avoiding unncessary work - Often, workloads will perform work that they may abort (request racing comes to mind). This allows for syscalls to be aborted safely prior to the notification being received by the supervisor. In this, the supervisor doesn't end up doing work that the workload does not want to complete anyways. * Avoiding side effects - We don't want the syscall to be interruptible once the supervisor starts doing work because it may not be trivial to reverse the operation. For example, unmounting a file system may take a long time, and it's hard to rollback, or treat that as reentrant. * Avoid breaking runtimes - Various runtimes do not GC when they are during a syscall (or while running native code that subsequently calls a syscall). If many notifications are blocked, and not picked up by the supervisor, this can get the application into a bad state. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220503080958.20220-2-sargun@sargun.me
2022-05-03 08:09:56 +00:00
* @wait_killable_recv: Put notifying process in killable state once the
* notification is received by the userspace listener.
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
* @prev: points to a previously installed, or inherited, filter
* @prog: the BPF program to evaluate
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
* @notif: the struct that holds all notification related information
* @notify_lock: A lock for all notification-related accesses.
* @wqh: A wait queue for poll if a notifier is in use.
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
*
* seccomp_filter objects are organized in a tree linked via the @prev
* pointer. For any task, it appears to be a singly-linked list starting
* with current->seccomp.filter, the most recently attached or inherited filter.
* However, multiple filters may share a @prev node, by way of fork(), which
* results in a unidirectional tree existing in memory. This is similar to
* how namespaces work.
*
* seccomp_filter objects should never be modified after being attached
* to a task_struct (other than @refs).
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
*/
struct seccomp_filter {
refcount_t refs;
seccomp: notify about unused filter We've been making heavy use of the seccomp notifier to intercept and handle certain syscalls for containers. This patch allows a syscall supervisor listening on a given notifier to be notified when a seccomp filter has become unused. A container is often managed by a singleton supervisor process the so-called "monitor". This monitor process has an event loop which has various event handlers registered. If the user specified a seccomp profile that included a notifier for various syscalls then we also register a seccomp notify even handler. For any container using a separate pid namespace the lifecycle of the seccomp notifier is bound to the init process of the pid namespace, i.e. when the init process exits the filter must be unused. If a new process attaches to a container we force it to assume a seccomp profile. This can either be the same seccomp profile as the container was started with or a modified one. If the attaching process makes use of the seccomp notifier we will register a new seccomp notifier handler in the monitor's event loop. However, when the attaching process exits we can't simply delete the handler since other child processes could've been created (daemons spawned etc.) that have inherited the seccomp filter and so we need to keep the seccomp notifier fd alive in the event loop. But this is problematic since we don't get a notification when the seccomp filter has become unused and so we currently never remove the seccomp notifier fd from the event loop and just keep accumulating fds in the event loop. We've had this issue for a while but it has recently become more pressing as more and larger users make use of this. To fix this, we introduce a new "users" reference counter that tracks any tasks and dependent filters making use of a filter. When a notifier is registered waiting tasks will be notified that the filter is now empty by receiving a (E)POLLHUP event. The concept in this patch introduces is the same as for signal_struct, i.e. reference counting for life-cycle management is decoupled from reference counting taks using the object. There's probably some trickery possible but the second counter is just the correct way of doing this IMHO and has precedence. Cc: Tycho Andersen <tycho@tycho.ws> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Denton <mpdenton@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Jann Horn <jannh@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Robert Sesek <rsesek@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Linux Containers <containers@lists.linux-foundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200531115031.391515-3-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31 11:50:30 +00:00
refcount_t users;
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for all actions except for SECCOMP_RET_ALLOW for the given filter. SECCOMP_RET_KILL actions are always logged, when "kill" is in the actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged, regardless of this flag. This flag can be used to create noisy filters that result in all non-allowed actions to be logged. A process may have one noisy filter, which is loaded with this flag, as well as a quiet filter that's not loaded with this flag. This allows for the actions in a set of filters to be selectively conveyed to the admin. Since a system could have a large number of allocated seccomp_filter structs, struct packing was taken in consideration. On 64 bit x86, the new log member takes up one byte of an existing four byte hole in the struct. On 32 bit x86, the new log member creates a new four byte hole (unavoidable) and consumes one of those bytes. Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not capable of inspecting the audit log to verify that the actions taken in the filter were logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
bool log;
seccomp: Add wait_killable semantic to seccomp user notifier This introduces a per-filter flag (SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV) that makes it so that when notifications are received by the supervisor the notifying process will transition to wait killable semantics. Although wait killable isn't a set of semantics formally exposed to userspace, the concept is searchable. If the notifying process is signaled prior to the notification being received by the userspace agent, it will be handled as normal. One quirk about how this is handled is that the notifying process only switches to TASK_KILLABLE if it receives a wakeup from either an addfd or a signal. This is to avoid an unnecessary wakeup of the notifying task. The reasons behind switching into wait_killable only after userspace receives the notification are: * Avoiding unncessary work - Often, workloads will perform work that they may abort (request racing comes to mind). This allows for syscalls to be aborted safely prior to the notification being received by the supervisor. In this, the supervisor doesn't end up doing work that the workload does not want to complete anyways. * Avoiding side effects - We don't want the syscall to be interruptible once the supervisor starts doing work because it may not be trivial to reverse the operation. For example, unmounting a file system may take a long time, and it's hard to rollback, or treat that as reentrant. * Avoid breaking runtimes - Various runtimes do not GC when they are during a syscall (or while running native code that subsequently calls a syscall). If many notifications are blocked, and not picked up by the supervisor, this can get the application into a bad state. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220503080958.20220-2-sargun@sargun.me
2022-05-03 08:09:56 +00:00
bool wait_killable_recv;
seccomp/cache: Add "emulator" to check if filter is constant allow SECCOMP_CACHE will only operate on syscalls that do not access any syscall arguments or instruction pointer. To facilitate this we need a static analyser to know whether a filter will return allow regardless of syscall arguments for a given architecture number / syscall number pair. This is implemented here with a pseudo-emulator, and stored in a per-filter bitmap. In order to build this bitmap at filter attach time, each filter is emulated for every syscall (under each possible architecture), and checked for any accesses of struct seccomp_data that are not the "arch" nor "nr" (syscall) members. If only "arch" and "nr" are examined, and the program returns allow, then we can be sure that the filter must return allow independent from syscall arguments. Nearly all seccomp filters are built from these cBPF instructions: BPF_LD | BPF_W | BPF_ABS BPF_JMP | BPF_JEQ | BPF_K BPF_JMP | BPF_JGE | BPF_K BPF_JMP | BPF_JGT | BPF_K BPF_JMP | BPF_JSET | BPF_K BPF_JMP | BPF_JA BPF_RET | BPF_K BPF_ALU | BPF_AND | BPF_K Each of these instructions are emulated. Any weirdness or loading from a syscall argument will cause the emulator to bail. The emulation is also halted if it reaches a return. In that case, if it returns an SECCOMP_RET_ALLOW, the syscall is marked as good. Emulator structure and comments are from Kees [1] and Jann [2]. Emulation is done at attach time. If a filter depends on more filters, and if the dependee does not guarantee to allow the syscall, then we skip the emulation of this syscall. [1] https://lore.kernel.org/lkml/20200923232923.3142503-5-keescook@chromium.org/ [2] https://lore.kernel.org/lkml/CAG48ez1p=dR_2ikKq=xVxkoGg0fYpTBpkhJSv1w-6BG=76PAvw@mail.gmail.com/ Suggested-by: Jann Horn <jannh@google.com> Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu> Reviewed-by: Jann Horn <jannh@google.com> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/71c7be2db5ee08905f41c3be5c1ad6e2601ce88f.1602431034.git.yifeifz2@illinois.edu
2020-10-11 15:47:43 +00:00
struct action_cache cache;
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
struct seccomp_filter *prev;
net: filter: split 'struct sk_filter' into socket and bpf parts clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31 03:34:16 +00:00
struct bpf_prog *prog;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
struct notification *notif;
struct mutex notify_lock;
wait_queue_head_t wqh;
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
};
/* Limit any path through the tree to 256KB worth of instructions. */
#define MAX_INSNS_PER_PATH ((1 << 18) / sizeof(struct sock_filter))
net: filter: rework/optimize internal BPF interpreter's instruction set This patch replaces/reworks the kernel-internal BPF interpreter with an optimized BPF instruction set format that is modelled closer to mimic native instruction sets and is designed to be JITed with one to one mapping. Thus, the new interpreter is noticeably faster than the current implementation of sk_run_filter(); mainly for two reasons: 1. Fall-through jumps: BPF jump instructions are forced to go either 'true' or 'false' branch which causes branch-miss penalty. The new BPF jump instructions have only one branch and fall-through otherwise, which fits the CPU branch predictor logic better. `perf stat` shows drastic difference for branch-misses between the old and new code. 2. Jump-threaded implementation of interpreter vs switch statement: Instead of single table-jump at the top of 'switch' statement, gcc will now generate multiple table-jump instructions, which helps CPU branch predictor logic. Note that the verification of filters is still being done through sk_chk_filter() in classical BPF format, so filters from user- or kernel space are verified in the same way as we do now, and same restrictions/constraints hold as well. We reuse current BPF JIT compilers in a way that this upgrade would even be fine as is, but nevertheless allows for a successive upgrade of BPF JIT compilers to the new format. The internal instruction set migration is being done after the probing for JIT compilation, so in case JIT compilers are able to create a native opcode image, we're going to use that, and in all other cases we're doing a follow-up migration of the BPF program's instruction set, so that it can be transparently run in the new interpreter. In short, the *internal* format extends BPF in the following way (more details can be taken from the appended documentation): - Number of registers increase from 2 to 10 - Register width increases from 32-bit to 64-bit - Conditional jt/jf targets replaced with jt/fall-through - Adds signed > and >= insns - 16 4-byte stack slots for register spill-fill replaced with up to 512 bytes of multi-use stack space - Introduction of bpf_call insn and register passing convention for zero overhead calls from/to other kernel functions - Adds arithmetic right shift and endianness conversion insns - Adds atomic_add insn - Old tax/txa insns are replaced with 'mov dst,src' insn Performance of two BPF filters generated by libpcap resp. bpf_asm was measured on x86_64, i386 and arm32 (other libpcap programs have similar performance differences): fprog #1 is taken from Documentation/networking/filter.txt: tcpdump -i eth0 port 22 -dd fprog #2 is taken from 'man tcpdump': tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)' -dd Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call, smaller is better: --x86_64-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 90 101 192 202 new BPF 31 71 47 97 old BPF jit 12 34 17 44 new BPF jit TBD --i386-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 107 136 227 252 new BPF 40 119 69 172 --arm32-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 202 300 475 540 new BPF 180 270 330 470 old BPF jit 26 182 37 202 new BPF jit TBD Thus, without changing any userland BPF filters, applications on top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf classifier, netfilter's xt_bpf, team driver's load-balancing mode, and many more will have better interpreter filtering performance. While we are replacing the internal BPF interpreter, we also need to convert seccomp BPF in the same step to make use of the new internal structure since it makes use of lower-level API details without being further decoupled through higher-level calls like sk_unattached_filter_{create,destroy}(), for example. Just as for normal socket filtering, also seccomp BPF experiences a time-to-verdict speedup: 05-sim-long_jumps.c of libseccomp was used as micro-benchmark: seccomp_rule_add_exact(ctx,... seccomp_rule_add_exact(ctx,... rc = seccomp_load(ctx); for (i = 0; i < 10000000; i++) syscall(199, 100); 'short filter' has 2 rules 'large filter' has 200 rules 'short filter' performance is slightly better on x86_64/i386/arm32 'large filter' is much faster on x86_64 and i386 and shows no difference on arm32 --x86_64-- short filter old BPF: 2.7 sec 39.12% bench libc-2.15.so [.] syscall 8.10% bench [kernel.kallsyms] [k] sk_run_filter 6.31% bench [kernel.kallsyms] [k] system_call 5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller 3.70% bench [kernel.kallsyms] [k] __secure_computing 3.67% bench [kernel.kallsyms] [k] lock_is_held 3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load new BPF: 2.58 sec 42.05% bench libc-2.15.so [.] syscall 6.91% bench [kernel.kallsyms] [k] system_call 6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 6.07% bench [kernel.kallsyms] [k] __secure_computing 5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp --arm32-- short filter old BPF: 4.0 sec 39.92% bench [kernel.kallsyms] [k] vector_swi 16.60% bench [kernel.kallsyms] [k] sk_run_filter 14.66% bench libc-2.17.so [.] syscall 5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load 5.10% bench [kernel.kallsyms] [k] __secure_computing new BPF: 3.7 sec 35.93% bench [kernel.kallsyms] [k] vector_swi 21.89% bench libc-2.17.so [.] syscall 13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 6.25% bench [kernel.kallsyms] [k] __secure_computing 3.96% bench [kernel.kallsyms] [k] syscall_trace_exit --x86_64-- large filter old BPF: 8.6 seconds 73.38% bench [kernel.kallsyms] [k] sk_run_filter 10.70% bench libc-2.15.so [.] syscall 5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.97% bench [kernel.kallsyms] [k] system_call new BPF: 5.7 seconds 66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 16.75% bench libc-2.15.so [.] syscall 3.31% bench [kernel.kallsyms] [k] system_call 2.88% bench [kernel.kallsyms] [k] __secure_computing --i386-- large filter old BPF: 5.4 sec new BPF: 3.8 sec --arm32-- large filter old BPF: 13.5 sec 73.88% bench [kernel.kallsyms] [k] sk_run_filter 10.29% bench [kernel.kallsyms] [k] vector_swi 6.46% bench libc-2.17.so [.] syscall 2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.19% bench [kernel.kallsyms] [k] __secure_computing 0.87% bench [kernel.kallsyms] [k] sys_getuid new BPF: 13.5 sec 76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 10.98% bench [kernel.kallsyms] [k] vector_swi 5.87% bench libc-2.17.so [.] syscall 1.77% bench [kernel.kallsyms] [k] __secure_computing 0.93% bench [kernel.kallsyms] [k] sys_getuid BPF filters generated by seccomp are very branchy, so the new internal BPF performance is better than the old one. Performance gains will be even higher when BPF JIT is committed for the new structure, which is planned in future work (as successive JIT migrations). BPF has also been stress-tested with trinity's BPF fuzzer. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Kees Cook <keescook@chromium.org> Cc: Paul Moore <pmoore@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: linux-kernel@vger.kernel.org Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
/*
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
* Endianness is explicitly ignored and left for BPF program authors to manage
* as per the specific architecture.
*/
net: filter: rework/optimize internal BPF interpreter's instruction set This patch replaces/reworks the kernel-internal BPF interpreter with an optimized BPF instruction set format that is modelled closer to mimic native instruction sets and is designed to be JITed with one to one mapping. Thus, the new interpreter is noticeably faster than the current implementation of sk_run_filter(); mainly for two reasons: 1. Fall-through jumps: BPF jump instructions are forced to go either 'true' or 'false' branch which causes branch-miss penalty. The new BPF jump instructions have only one branch and fall-through otherwise, which fits the CPU branch predictor logic better. `perf stat` shows drastic difference for branch-misses between the old and new code. 2. Jump-threaded implementation of interpreter vs switch statement: Instead of single table-jump at the top of 'switch' statement, gcc will now generate multiple table-jump instructions, which helps CPU branch predictor logic. Note that the verification of filters is still being done through sk_chk_filter() in classical BPF format, so filters from user- or kernel space are verified in the same way as we do now, and same restrictions/constraints hold as well. We reuse current BPF JIT compilers in a way that this upgrade would even be fine as is, but nevertheless allows for a successive upgrade of BPF JIT compilers to the new format. The internal instruction set migration is being done after the probing for JIT compilation, so in case JIT compilers are able to create a native opcode image, we're going to use that, and in all other cases we're doing a follow-up migration of the BPF program's instruction set, so that it can be transparently run in the new interpreter. In short, the *internal* format extends BPF in the following way (more details can be taken from the appended documentation): - Number of registers increase from 2 to 10 - Register width increases from 32-bit to 64-bit - Conditional jt/jf targets replaced with jt/fall-through - Adds signed > and >= insns - 16 4-byte stack slots for register spill-fill replaced with up to 512 bytes of multi-use stack space - Introduction of bpf_call insn and register passing convention for zero overhead calls from/to other kernel functions - Adds arithmetic right shift and endianness conversion insns - Adds atomic_add insn - Old tax/txa insns are replaced with 'mov dst,src' insn Performance of two BPF filters generated by libpcap resp. bpf_asm was measured on x86_64, i386 and arm32 (other libpcap programs have similar performance differences): fprog #1 is taken from Documentation/networking/filter.txt: tcpdump -i eth0 port 22 -dd fprog #2 is taken from 'man tcpdump': tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)' -dd Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call, smaller is better: --x86_64-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 90 101 192 202 new BPF 31 71 47 97 old BPF jit 12 34 17 44 new BPF jit TBD --i386-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 107 136 227 252 new BPF 40 119 69 172 --arm32-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 202 300 475 540 new BPF 180 270 330 470 old BPF jit 26 182 37 202 new BPF jit TBD Thus, without changing any userland BPF filters, applications on top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf classifier, netfilter's xt_bpf, team driver's load-balancing mode, and many more will have better interpreter filtering performance. While we are replacing the internal BPF interpreter, we also need to convert seccomp BPF in the same step to make use of the new internal structure since it makes use of lower-level API details without being further decoupled through higher-level calls like sk_unattached_filter_{create,destroy}(), for example. Just as for normal socket filtering, also seccomp BPF experiences a time-to-verdict speedup: 05-sim-long_jumps.c of libseccomp was used as micro-benchmark: seccomp_rule_add_exact(ctx,... seccomp_rule_add_exact(ctx,... rc = seccomp_load(ctx); for (i = 0; i < 10000000; i++) syscall(199, 100); 'short filter' has 2 rules 'large filter' has 200 rules 'short filter' performance is slightly better on x86_64/i386/arm32 'large filter' is much faster on x86_64 and i386 and shows no difference on arm32 --x86_64-- short filter old BPF: 2.7 sec 39.12% bench libc-2.15.so [.] syscall 8.10% bench [kernel.kallsyms] [k] sk_run_filter 6.31% bench [kernel.kallsyms] [k] system_call 5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller 3.70% bench [kernel.kallsyms] [k] __secure_computing 3.67% bench [kernel.kallsyms] [k] lock_is_held 3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load new BPF: 2.58 sec 42.05% bench libc-2.15.so [.] syscall 6.91% bench [kernel.kallsyms] [k] system_call 6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 6.07% bench [kernel.kallsyms] [k] __secure_computing 5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp --arm32-- short filter old BPF: 4.0 sec 39.92% bench [kernel.kallsyms] [k] vector_swi 16.60% bench [kernel.kallsyms] [k] sk_run_filter 14.66% bench libc-2.17.so [.] syscall 5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load 5.10% bench [kernel.kallsyms] [k] __secure_computing new BPF: 3.7 sec 35.93% bench [kernel.kallsyms] [k] vector_swi 21.89% bench libc-2.17.so [.] syscall 13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 6.25% bench [kernel.kallsyms] [k] __secure_computing 3.96% bench [kernel.kallsyms] [k] syscall_trace_exit --x86_64-- large filter old BPF: 8.6 seconds 73.38% bench [kernel.kallsyms] [k] sk_run_filter 10.70% bench libc-2.15.so [.] syscall 5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.97% bench [kernel.kallsyms] [k] system_call new BPF: 5.7 seconds 66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 16.75% bench libc-2.15.so [.] syscall 3.31% bench [kernel.kallsyms] [k] system_call 2.88% bench [kernel.kallsyms] [k] __secure_computing --i386-- large filter old BPF: 5.4 sec new BPF: 3.8 sec --arm32-- large filter old BPF: 13.5 sec 73.88% bench [kernel.kallsyms] [k] sk_run_filter 10.29% bench [kernel.kallsyms] [k] vector_swi 6.46% bench libc-2.17.so [.] syscall 2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.19% bench [kernel.kallsyms] [k] __secure_computing 0.87% bench [kernel.kallsyms] [k] sys_getuid new BPF: 13.5 sec 76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 10.98% bench [kernel.kallsyms] [k] vector_swi 5.87% bench libc-2.17.so [.] syscall 1.77% bench [kernel.kallsyms] [k] __secure_computing 0.93% bench [kernel.kallsyms] [k] sys_getuid BPF filters generated by seccomp are very branchy, so the new internal BPF performance is better than the old one. Performance gains will be even higher when BPF JIT is committed for the new structure, which is planned in future work (as successive JIT migrations). BPF has also been stress-tested with trinity's BPF fuzzer. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Kees Cook <keescook@chromium.org> Cc: Paul Moore <pmoore@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: linux-kernel@vger.kernel.org Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
static void populate_seccomp_data(struct seccomp_data *sd)
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
{
/*
* Instead of using current_pt_reg(), we're already doing the work
* to safely fetch "current", so just use "task" everywhere below.
*/
net: filter: rework/optimize internal BPF interpreter's instruction set This patch replaces/reworks the kernel-internal BPF interpreter with an optimized BPF instruction set format that is modelled closer to mimic native instruction sets and is designed to be JITed with one to one mapping. Thus, the new interpreter is noticeably faster than the current implementation of sk_run_filter(); mainly for two reasons: 1. Fall-through jumps: BPF jump instructions are forced to go either 'true' or 'false' branch which causes branch-miss penalty. The new BPF jump instructions have only one branch and fall-through otherwise, which fits the CPU branch predictor logic better. `perf stat` shows drastic difference for branch-misses between the old and new code. 2. Jump-threaded implementation of interpreter vs switch statement: Instead of single table-jump at the top of 'switch' statement, gcc will now generate multiple table-jump instructions, which helps CPU branch predictor logic. Note that the verification of filters is still being done through sk_chk_filter() in classical BPF format, so filters from user- or kernel space are verified in the same way as we do now, and same restrictions/constraints hold as well. We reuse current BPF JIT compilers in a way that this upgrade would even be fine as is, but nevertheless allows for a successive upgrade of BPF JIT compilers to the new format. The internal instruction set migration is being done after the probing for JIT compilation, so in case JIT compilers are able to create a native opcode image, we're going to use that, and in all other cases we're doing a follow-up migration of the BPF program's instruction set, so that it can be transparently run in the new interpreter. In short, the *internal* format extends BPF in the following way (more details can be taken from the appended documentation): - Number of registers increase from 2 to 10 - Register width increases from 32-bit to 64-bit - Conditional jt/jf targets replaced with jt/fall-through - Adds signed > and >= insns - 16 4-byte stack slots for register spill-fill replaced with up to 512 bytes of multi-use stack space - Introduction of bpf_call insn and register passing convention for zero overhead calls from/to other kernel functions - Adds arithmetic right shift and endianness conversion insns - Adds atomic_add insn - Old tax/txa insns are replaced with 'mov dst,src' insn Performance of two BPF filters generated by libpcap resp. bpf_asm was measured on x86_64, i386 and arm32 (other libpcap programs have similar performance differences): fprog #1 is taken from Documentation/networking/filter.txt: tcpdump -i eth0 port 22 -dd fprog #2 is taken from 'man tcpdump': tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)' -dd Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call, smaller is better: --x86_64-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 90 101 192 202 new BPF 31 71 47 97 old BPF jit 12 34 17 44 new BPF jit TBD --i386-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 107 136 227 252 new BPF 40 119 69 172 --arm32-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 202 300 475 540 new BPF 180 270 330 470 old BPF jit 26 182 37 202 new BPF jit TBD Thus, without changing any userland BPF filters, applications on top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf classifier, netfilter's xt_bpf, team driver's load-balancing mode, and many more will have better interpreter filtering performance. While we are replacing the internal BPF interpreter, we also need to convert seccomp BPF in the same step to make use of the new internal structure since it makes use of lower-level API details without being further decoupled through higher-level calls like sk_unattached_filter_{create,destroy}(), for example. Just as for normal socket filtering, also seccomp BPF experiences a time-to-verdict speedup: 05-sim-long_jumps.c of libseccomp was used as micro-benchmark: seccomp_rule_add_exact(ctx,... seccomp_rule_add_exact(ctx,... rc = seccomp_load(ctx); for (i = 0; i < 10000000; i++) syscall(199, 100); 'short filter' has 2 rules 'large filter' has 200 rules 'short filter' performance is slightly better on x86_64/i386/arm32 'large filter' is much faster on x86_64 and i386 and shows no difference on arm32 --x86_64-- short filter old BPF: 2.7 sec 39.12% bench libc-2.15.so [.] syscall 8.10% bench [kernel.kallsyms] [k] sk_run_filter 6.31% bench [kernel.kallsyms] [k] system_call 5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller 3.70% bench [kernel.kallsyms] [k] __secure_computing 3.67% bench [kernel.kallsyms] [k] lock_is_held 3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load new BPF: 2.58 sec 42.05% bench libc-2.15.so [.] syscall 6.91% bench [kernel.kallsyms] [k] system_call 6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 6.07% bench [kernel.kallsyms] [k] __secure_computing 5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp --arm32-- short filter old BPF: 4.0 sec 39.92% bench [kernel.kallsyms] [k] vector_swi 16.60% bench [kernel.kallsyms] [k] sk_run_filter 14.66% bench libc-2.17.so [.] syscall 5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load 5.10% bench [kernel.kallsyms] [k] __secure_computing new BPF: 3.7 sec 35.93% bench [kernel.kallsyms] [k] vector_swi 21.89% bench libc-2.17.so [.] syscall 13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 6.25% bench [kernel.kallsyms] [k] __secure_computing 3.96% bench [kernel.kallsyms] [k] syscall_trace_exit --x86_64-- large filter old BPF: 8.6 seconds 73.38% bench [kernel.kallsyms] [k] sk_run_filter 10.70% bench libc-2.15.so [.] syscall 5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.97% bench [kernel.kallsyms] [k] system_call new BPF: 5.7 seconds 66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 16.75% bench libc-2.15.so [.] syscall 3.31% bench [kernel.kallsyms] [k] system_call 2.88% bench [kernel.kallsyms] [k] __secure_computing --i386-- large filter old BPF: 5.4 sec new BPF: 3.8 sec --arm32-- large filter old BPF: 13.5 sec 73.88% bench [kernel.kallsyms] [k] sk_run_filter 10.29% bench [kernel.kallsyms] [k] vector_swi 6.46% bench libc-2.17.so [.] syscall 2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.19% bench [kernel.kallsyms] [k] __secure_computing 0.87% bench [kernel.kallsyms] [k] sys_getuid new BPF: 13.5 sec 76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 10.98% bench [kernel.kallsyms] [k] vector_swi 5.87% bench libc-2.17.so [.] syscall 1.77% bench [kernel.kallsyms] [k] __secure_computing 0.93% bench [kernel.kallsyms] [k] sys_getuid BPF filters generated by seccomp are very branchy, so the new internal BPF performance is better than the old one. Performance gains will be even higher when BPF JIT is committed for the new structure, which is planned in future work (as successive JIT migrations). BPF has also been stress-tested with trinity's BPF fuzzer. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Kees Cook <keescook@chromium.org> Cc: Paul Moore <pmoore@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: linux-kernel@vger.kernel.org Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
struct task_struct *task = current;
struct pt_regs *regs = task_pt_regs(task);
seccomp: fix populating a0-a5 syscall args in 32-bit x86 BPF Linus reports that on 32-bit x86 Chromium throws the following seccomp resp. audit log messages: audit: type=1326 audit(1397359304.356:28108): auid=500 uid=500 gid=500 ses=2 subj=unconfined_u:unconfined_r:chrome_sandbox_t:s0-s0:c0.c1023 pid=3677 comm="chrome" exe="/opt/google/chrome/chrome" sig=0 syscall=172 compat=0 ip=0xb2dd9852 code=0x30000 audit: type=1326 audit(1397359304.356:28109): auid=500 uid=500 gid=500 ses=2 subj=unconfined_u:unconfined_r:chrome_sandbox_t:s0-s0:c0.c1023 pid=3677 comm="chrome" exe="/opt/google/chrome/chrome" sig=0 syscall=5 compat=0 ip=0xb2dd9852 code=0x50000 These audit messages are being triggered via audit_seccomp() through __secure_computing() in seccomp mode (BPF) filter with seccomp return codes 0x30000 (== SECCOMP_RET_TRAP) and 0x50000 (== SECCOMP_RET_ERRNO) during filter runtime. Moreover, Linus reports that x86_64 Chromium seems fine. The underlying issue that explains this is that the implementation of populate_seccomp_data() is wrong. Our seccomp data structure sd that is being shared with user ABI is: struct seccomp_data { int nr; __u32 arch; __u64 instruction_pointer; __u64 args[6]; }; Therefore, a simple cast to 'unsigned long *' for storing the value of the syscall argument via syscall_get_arguments() is just wrong as on 32-bit x86 (or any other 32bit arch), it would result in storing a0-a5 at wrong offsets in args[] member, and thus i) could leak stack memory to user space and ii) tampers with the logic of seccomp BPF programs that read out and check for syscall arguments: syscall_get_arguments(task, regs, 0, 1, (unsigned long *) &sd->args[0]); Tested on 32-bit x86 with Google Chrome, unfortunately only via remote test machine through slow ssh X forwarding, but it fixes the issue on my side. So fix it up by storing args in type correct variables, gcc is clever and optimizes the copy away in other cases, e.g. x86_64. Fixes: bd4cf0ed331a ("net: filter: rework/optimize internal BPF interpreter's instruction set") Reported-and-bisected-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14 19:02:59 +00:00
unsigned long args[6];
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
net: filter: rework/optimize internal BPF interpreter's instruction set This patch replaces/reworks the kernel-internal BPF interpreter with an optimized BPF instruction set format that is modelled closer to mimic native instruction sets and is designed to be JITed with one to one mapping. Thus, the new interpreter is noticeably faster than the current implementation of sk_run_filter(); mainly for two reasons: 1. Fall-through jumps: BPF jump instructions are forced to go either 'true' or 'false' branch which causes branch-miss penalty. The new BPF jump instructions have only one branch and fall-through otherwise, which fits the CPU branch predictor logic better. `perf stat` shows drastic difference for branch-misses between the old and new code. 2. Jump-threaded implementation of interpreter vs switch statement: Instead of single table-jump at the top of 'switch' statement, gcc will now generate multiple table-jump instructions, which helps CPU branch predictor logic. Note that the verification of filters is still being done through sk_chk_filter() in classical BPF format, so filters from user- or kernel space are verified in the same way as we do now, and same restrictions/constraints hold as well. We reuse current BPF JIT compilers in a way that this upgrade would even be fine as is, but nevertheless allows for a successive upgrade of BPF JIT compilers to the new format. The internal instruction set migration is being done after the probing for JIT compilation, so in case JIT compilers are able to create a native opcode image, we're going to use that, and in all other cases we're doing a follow-up migration of the BPF program's instruction set, so that it can be transparently run in the new interpreter. In short, the *internal* format extends BPF in the following way (more details can be taken from the appended documentation): - Number of registers increase from 2 to 10 - Register width increases from 32-bit to 64-bit - Conditional jt/jf targets replaced with jt/fall-through - Adds signed > and >= insns - 16 4-byte stack slots for register spill-fill replaced with up to 512 bytes of multi-use stack space - Introduction of bpf_call insn and register passing convention for zero overhead calls from/to other kernel functions - Adds arithmetic right shift and endianness conversion insns - Adds atomic_add insn - Old tax/txa insns are replaced with 'mov dst,src' insn Performance of two BPF filters generated by libpcap resp. bpf_asm was measured on x86_64, i386 and arm32 (other libpcap programs have similar performance differences): fprog #1 is taken from Documentation/networking/filter.txt: tcpdump -i eth0 port 22 -dd fprog #2 is taken from 'man tcpdump': tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)' -dd Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call, smaller is better: --x86_64-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 90 101 192 202 new BPF 31 71 47 97 old BPF jit 12 34 17 44 new BPF jit TBD --i386-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 107 136 227 252 new BPF 40 119 69 172 --arm32-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 202 300 475 540 new BPF 180 270 330 470 old BPF jit 26 182 37 202 new BPF jit TBD Thus, without changing any userland BPF filters, applications on top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf classifier, netfilter's xt_bpf, team driver's load-balancing mode, and many more will have better interpreter filtering performance. While we are replacing the internal BPF interpreter, we also need to convert seccomp BPF in the same step to make use of the new internal structure since it makes use of lower-level API details without being further decoupled through higher-level calls like sk_unattached_filter_{create,destroy}(), for example. Just as for normal socket filtering, also seccomp BPF experiences a time-to-verdict speedup: 05-sim-long_jumps.c of libseccomp was used as micro-benchmark: seccomp_rule_add_exact(ctx,... seccomp_rule_add_exact(ctx,... rc = seccomp_load(ctx); for (i = 0; i < 10000000; i++) syscall(199, 100); 'short filter' has 2 rules 'large filter' has 200 rules 'short filter' performance is slightly better on x86_64/i386/arm32 'large filter' is much faster on x86_64 and i386 and shows no difference on arm32 --x86_64-- short filter old BPF: 2.7 sec 39.12% bench libc-2.15.so [.] syscall 8.10% bench [kernel.kallsyms] [k] sk_run_filter 6.31% bench [kernel.kallsyms] [k] system_call 5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller 3.70% bench [kernel.kallsyms] [k] __secure_computing 3.67% bench [kernel.kallsyms] [k] lock_is_held 3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load new BPF: 2.58 sec 42.05% bench libc-2.15.so [.] syscall 6.91% bench [kernel.kallsyms] [k] system_call 6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 6.07% bench [kernel.kallsyms] [k] __secure_computing 5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp --arm32-- short filter old BPF: 4.0 sec 39.92% bench [kernel.kallsyms] [k] vector_swi 16.60% bench [kernel.kallsyms] [k] sk_run_filter 14.66% bench libc-2.17.so [.] syscall 5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load 5.10% bench [kernel.kallsyms] [k] __secure_computing new BPF: 3.7 sec 35.93% bench [kernel.kallsyms] [k] vector_swi 21.89% bench libc-2.17.so [.] syscall 13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 6.25% bench [kernel.kallsyms] [k] __secure_computing 3.96% bench [kernel.kallsyms] [k] syscall_trace_exit --x86_64-- large filter old BPF: 8.6 seconds 73.38% bench [kernel.kallsyms] [k] sk_run_filter 10.70% bench libc-2.15.so [.] syscall 5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.97% bench [kernel.kallsyms] [k] system_call new BPF: 5.7 seconds 66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 16.75% bench libc-2.15.so [.] syscall 3.31% bench [kernel.kallsyms] [k] system_call 2.88% bench [kernel.kallsyms] [k] __secure_computing --i386-- large filter old BPF: 5.4 sec new BPF: 3.8 sec --arm32-- large filter old BPF: 13.5 sec 73.88% bench [kernel.kallsyms] [k] sk_run_filter 10.29% bench [kernel.kallsyms] [k] vector_swi 6.46% bench libc-2.17.so [.] syscall 2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.19% bench [kernel.kallsyms] [k] __secure_computing 0.87% bench [kernel.kallsyms] [k] sys_getuid new BPF: 13.5 sec 76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 10.98% bench [kernel.kallsyms] [k] vector_swi 5.87% bench libc-2.17.so [.] syscall 1.77% bench [kernel.kallsyms] [k] __secure_computing 0.93% bench [kernel.kallsyms] [k] sys_getuid BPF filters generated by seccomp are very branchy, so the new internal BPF performance is better than the old one. Performance gains will be even higher when BPF JIT is committed for the new structure, which is planned in future work (as successive JIT migrations). BPF has also been stress-tested with trinity's BPF fuzzer. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Kees Cook <keescook@chromium.org> Cc: Paul Moore <pmoore@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: linux-kernel@vger.kernel.org Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
sd->nr = syscall_get_nr(task, regs);
syscall_get_arch: add "struct task_struct *" argument This argument is required to extend the generic ptrace API with PTRACE_GET_SYSCALL_INFO request: syscall_get_arch() is going to be called from ptrace_request() along with syscall_get_nr(), syscall_get_arguments(), syscall_get_error(), and syscall_get_return_value() functions with a tracee as their argument. The primary intent is that the triple (audit_arch, syscall_nr, arg1..arg6) should describe what system call is being called and what its arguments are. Reverts: 5e937a9ae913 ("syscall_get_arch: remove useless function arguments") Reverts: 1002d94d3076 ("syscall.h: fix doc text for syscall_get_arch()") Reviewed-by: Andy Lutomirski <luto@kernel.org> # for x86 Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Paul Burton <paul.burton@mips.com> # MIPS parts Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Kees Cook <keescook@chromium.org> # seccomp parts Acked-by: Mark Salter <msalter@redhat.com> # for the c6x bit Cc: Elvira Khabirova <lineprinter@altlinux.org> Cc: Eugene Syromyatnikov <esyr@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: x86@kernel.org Cc: linux-alpha@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-hexagon@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-m68k@lists.linux-m68k.org Cc: linux-mips@vger.kernel.org Cc: nios2-dev@lists.rocketboards.org Cc: openrisc@lists.librecores.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-riscv@lists.infradead.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: linux-xtensa@linux-xtensa.org Cc: linux-arch@vger.kernel.org Cc: linux-audit@redhat.com Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-03-17 23:30:18 +00:00
sd->arch = syscall_get_arch(task);
syscalls: Remove start and number from syscall_get_arguments() args At Linux Plumbers, Andy Lutomirski approached me and pointed out that the function call syscall_get_arguments() implemented in x86 was horribly written and not optimized for the standard case of passing in 0 and 6 for the starting index and the number of system calls to get. When looking at all the users of this function, I discovered that all instances pass in only 0 and 6 for these arguments. Instead of having this function handle different cases that are never used, simply rewrite it to return the first 6 arguments of a system call. This should help out the performance of tracing system calls by ptrace, ftrace and perf. Link: http://lkml.kernel.org/r/20161107213233.754809394@goodmis.org Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Dave Martin <dave.martin@arm.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: x86@kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-hexagon@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: nios2-dev@lists.rocketboards.org Cc: openrisc@lists.librecores.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-riscv@lists.infradead.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: linux-xtensa@linux-xtensa.org Cc: linux-arch@vger.kernel.org Acked-by: Paul Burton <paul.burton@mips.com> # MIPS parts Acked-by: Max Filippov <jcmvbkbc@gmail.com> # For xtensa changes Acked-by: Will Deacon <will.deacon@arm.com> # For the arm64 bits Reviewed-by: Thomas Gleixner <tglx@linutronix.de> # for x86 Reviewed-by: Dmitry V. Levin <ldv@altlinux.org> Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2016-11-07 21:26:37 +00:00
syscall_get_arguments(task, regs, args);
seccomp: fix populating a0-a5 syscall args in 32-bit x86 BPF Linus reports that on 32-bit x86 Chromium throws the following seccomp resp. audit log messages: audit: type=1326 audit(1397359304.356:28108): auid=500 uid=500 gid=500 ses=2 subj=unconfined_u:unconfined_r:chrome_sandbox_t:s0-s0:c0.c1023 pid=3677 comm="chrome" exe="/opt/google/chrome/chrome" sig=0 syscall=172 compat=0 ip=0xb2dd9852 code=0x30000 audit: type=1326 audit(1397359304.356:28109): auid=500 uid=500 gid=500 ses=2 subj=unconfined_u:unconfined_r:chrome_sandbox_t:s0-s0:c0.c1023 pid=3677 comm="chrome" exe="/opt/google/chrome/chrome" sig=0 syscall=5 compat=0 ip=0xb2dd9852 code=0x50000 These audit messages are being triggered via audit_seccomp() through __secure_computing() in seccomp mode (BPF) filter with seccomp return codes 0x30000 (== SECCOMP_RET_TRAP) and 0x50000 (== SECCOMP_RET_ERRNO) during filter runtime. Moreover, Linus reports that x86_64 Chromium seems fine. The underlying issue that explains this is that the implementation of populate_seccomp_data() is wrong. Our seccomp data structure sd that is being shared with user ABI is: struct seccomp_data { int nr; __u32 arch; __u64 instruction_pointer; __u64 args[6]; }; Therefore, a simple cast to 'unsigned long *' for storing the value of the syscall argument via syscall_get_arguments() is just wrong as on 32-bit x86 (or any other 32bit arch), it would result in storing a0-a5 at wrong offsets in args[] member, and thus i) could leak stack memory to user space and ii) tampers with the logic of seccomp BPF programs that read out and check for syscall arguments: syscall_get_arguments(task, regs, 0, 1, (unsigned long *) &sd->args[0]); Tested on 32-bit x86 with Google Chrome, unfortunately only via remote test machine through slow ssh X forwarding, but it fixes the issue on my side. So fix it up by storing args in type correct variables, gcc is clever and optimizes the copy away in other cases, e.g. x86_64. Fixes: bd4cf0ed331a ("net: filter: rework/optimize internal BPF interpreter's instruction set") Reported-and-bisected-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14 19:02:59 +00:00
sd->args[0] = args[0];
sd->args[1] = args[1];
sd->args[2] = args[2];
sd->args[3] = args[3];
sd->args[4] = args[4];
sd->args[5] = args[5];
net: filter: rework/optimize internal BPF interpreter's instruction set This patch replaces/reworks the kernel-internal BPF interpreter with an optimized BPF instruction set format that is modelled closer to mimic native instruction sets and is designed to be JITed with one to one mapping. Thus, the new interpreter is noticeably faster than the current implementation of sk_run_filter(); mainly for two reasons: 1. Fall-through jumps: BPF jump instructions are forced to go either 'true' or 'false' branch which causes branch-miss penalty. The new BPF jump instructions have only one branch and fall-through otherwise, which fits the CPU branch predictor logic better. `perf stat` shows drastic difference for branch-misses between the old and new code. 2. Jump-threaded implementation of interpreter vs switch statement: Instead of single table-jump at the top of 'switch' statement, gcc will now generate multiple table-jump instructions, which helps CPU branch predictor logic. Note that the verification of filters is still being done through sk_chk_filter() in classical BPF format, so filters from user- or kernel space are verified in the same way as we do now, and same restrictions/constraints hold as well. We reuse current BPF JIT compilers in a way that this upgrade would even be fine as is, but nevertheless allows for a successive upgrade of BPF JIT compilers to the new format. The internal instruction set migration is being done after the probing for JIT compilation, so in case JIT compilers are able to create a native opcode image, we're going to use that, and in all other cases we're doing a follow-up migration of the BPF program's instruction set, so that it can be transparently run in the new interpreter. In short, the *internal* format extends BPF in the following way (more details can be taken from the appended documentation): - Number of registers increase from 2 to 10 - Register width increases from 32-bit to 64-bit - Conditional jt/jf targets replaced with jt/fall-through - Adds signed > and >= insns - 16 4-byte stack slots for register spill-fill replaced with up to 512 bytes of multi-use stack space - Introduction of bpf_call insn and register passing convention for zero overhead calls from/to other kernel functions - Adds arithmetic right shift and endianness conversion insns - Adds atomic_add insn - Old tax/txa insns are replaced with 'mov dst,src' insn Performance of two BPF filters generated by libpcap resp. bpf_asm was measured on x86_64, i386 and arm32 (other libpcap programs have similar performance differences): fprog #1 is taken from Documentation/networking/filter.txt: tcpdump -i eth0 port 22 -dd fprog #2 is taken from 'man tcpdump': tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)' -dd Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call, smaller is better: --x86_64-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 90 101 192 202 new BPF 31 71 47 97 old BPF jit 12 34 17 44 new BPF jit TBD --i386-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 107 136 227 252 new BPF 40 119 69 172 --arm32-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 202 300 475 540 new BPF 180 270 330 470 old BPF jit 26 182 37 202 new BPF jit TBD Thus, without changing any userland BPF filters, applications on top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf classifier, netfilter's xt_bpf, team driver's load-balancing mode, and many more will have better interpreter filtering performance. While we are replacing the internal BPF interpreter, we also need to convert seccomp BPF in the same step to make use of the new internal structure since it makes use of lower-level API details without being further decoupled through higher-level calls like sk_unattached_filter_{create,destroy}(), for example. Just as for normal socket filtering, also seccomp BPF experiences a time-to-verdict speedup: 05-sim-long_jumps.c of libseccomp was used as micro-benchmark: seccomp_rule_add_exact(ctx,... seccomp_rule_add_exact(ctx,... rc = seccomp_load(ctx); for (i = 0; i < 10000000; i++) syscall(199, 100); 'short filter' has 2 rules 'large filter' has 200 rules 'short filter' performance is slightly better on x86_64/i386/arm32 'large filter' is much faster on x86_64 and i386 and shows no difference on arm32 --x86_64-- short filter old BPF: 2.7 sec 39.12% bench libc-2.15.so [.] syscall 8.10% bench [kernel.kallsyms] [k] sk_run_filter 6.31% bench [kernel.kallsyms] [k] system_call 5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller 3.70% bench [kernel.kallsyms] [k] __secure_computing 3.67% bench [kernel.kallsyms] [k] lock_is_held 3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load new BPF: 2.58 sec 42.05% bench libc-2.15.so [.] syscall 6.91% bench [kernel.kallsyms] [k] system_call 6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 6.07% bench [kernel.kallsyms] [k] __secure_computing 5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp --arm32-- short filter old BPF: 4.0 sec 39.92% bench [kernel.kallsyms] [k] vector_swi 16.60% bench [kernel.kallsyms] [k] sk_run_filter 14.66% bench libc-2.17.so [.] syscall 5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load 5.10% bench [kernel.kallsyms] [k] __secure_computing new BPF: 3.7 sec 35.93% bench [kernel.kallsyms] [k] vector_swi 21.89% bench libc-2.17.so [.] syscall 13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 6.25% bench [kernel.kallsyms] [k] __secure_computing 3.96% bench [kernel.kallsyms] [k] syscall_trace_exit --x86_64-- large filter old BPF: 8.6 seconds 73.38% bench [kernel.kallsyms] [k] sk_run_filter 10.70% bench libc-2.15.so [.] syscall 5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.97% bench [kernel.kallsyms] [k] system_call new BPF: 5.7 seconds 66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 16.75% bench libc-2.15.so [.] syscall 3.31% bench [kernel.kallsyms] [k] system_call 2.88% bench [kernel.kallsyms] [k] __secure_computing --i386-- large filter old BPF: 5.4 sec new BPF: 3.8 sec --arm32-- large filter old BPF: 13.5 sec 73.88% bench [kernel.kallsyms] [k] sk_run_filter 10.29% bench [kernel.kallsyms] [k] vector_swi 6.46% bench libc-2.17.so [.] syscall 2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.19% bench [kernel.kallsyms] [k] __secure_computing 0.87% bench [kernel.kallsyms] [k] sys_getuid new BPF: 13.5 sec 76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 10.98% bench [kernel.kallsyms] [k] vector_swi 5.87% bench libc-2.17.so [.] syscall 1.77% bench [kernel.kallsyms] [k] __secure_computing 0.93% bench [kernel.kallsyms] [k] sys_getuid BPF filters generated by seccomp are very branchy, so the new internal BPF performance is better than the old one. Performance gains will be even higher when BPF JIT is committed for the new structure, which is planned in future work (as successive JIT migrations). BPF has also been stress-tested with trinity's BPF fuzzer. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Kees Cook <keescook@chromium.org> Cc: Paul Moore <pmoore@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: linux-kernel@vger.kernel.org Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
sd->instruction_pointer = KSTK_EIP(task);
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
}
/**
* seccomp_check_filter - verify seccomp filter code
* @filter: filter to verify
* @flen: length of filter
*
* Takes a previously checked filter (by bpf_check_classic) and
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
* redirects all filter code that loads struct sk_buff data
* and related data through seccomp_bpf_load. It also
* enforces length and alignment checking of those loads.
*
* Returns 0 if the rule set is legal or -EINVAL if not.
*/
static int seccomp_check_filter(struct sock_filter *filter, unsigned int flen)
{
int pc;
for (pc = 0; pc < flen; pc++) {
struct sock_filter *ftest = &filter[pc];
u16 code = ftest->code;
u32 k = ftest->k;
switch (code) {
net: filter: get rid of BPF_S_* enum This patch finally allows us to get rid of the BPF_S_* enum. Currently, the code performs unnecessary encode and decode workarounds in seccomp and filter migration itself when a filter is being attached in order to overcome BPF_S_* encoding which is not used anymore by the new interpreter resp. JIT compilers. Keeping it around would mean that also in future we would need to extend and maintain this enum and related encoders/decoders. We can get rid of all that and save us these operations during filter attaching. Naturally, also JIT compilers need to be updated by this. Before JIT conversion is being done, each compiler checks if A is being loaded at startup to obtain information if it needs to emit instructions to clear A first. Since BPF extensions are a subset of BPF_LD | BPF_{W,H,B} | BPF_ABS variants, case statements for extensions can be removed at that point. To ease and minimalize code changes in the classic JITs, we have introduced bpf_anc_helper(). Tested with test_bpf on x86_64 (JIT, int), s390x (JIT, int), arm (JIT, int), i368 (int), ppc64 (JIT, int); for sparc we unfortunately didn't have access, but changes are analogous to the rest. Joint work with Alexei Starovoitov. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mircea Gherzan <mgherzan@gmail.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Chema Gonzalez <chemag@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29 08:22:50 +00:00
case BPF_LD | BPF_W | BPF_ABS:
net: filter: rework/optimize internal BPF interpreter's instruction set This patch replaces/reworks the kernel-internal BPF interpreter with an optimized BPF instruction set format that is modelled closer to mimic native instruction sets and is designed to be JITed with one to one mapping. Thus, the new interpreter is noticeably faster than the current implementation of sk_run_filter(); mainly for two reasons: 1. Fall-through jumps: BPF jump instructions are forced to go either 'true' or 'false' branch which causes branch-miss penalty. The new BPF jump instructions have only one branch and fall-through otherwise, which fits the CPU branch predictor logic better. `perf stat` shows drastic difference for branch-misses between the old and new code. 2. Jump-threaded implementation of interpreter vs switch statement: Instead of single table-jump at the top of 'switch' statement, gcc will now generate multiple table-jump instructions, which helps CPU branch predictor logic. Note that the verification of filters is still being done through sk_chk_filter() in classical BPF format, so filters from user- or kernel space are verified in the same way as we do now, and same restrictions/constraints hold as well. We reuse current BPF JIT compilers in a way that this upgrade would even be fine as is, but nevertheless allows for a successive upgrade of BPF JIT compilers to the new format. The internal instruction set migration is being done after the probing for JIT compilation, so in case JIT compilers are able to create a native opcode image, we're going to use that, and in all other cases we're doing a follow-up migration of the BPF program's instruction set, so that it can be transparently run in the new interpreter. In short, the *internal* format extends BPF in the following way (more details can be taken from the appended documentation): - Number of registers increase from 2 to 10 - Register width increases from 32-bit to 64-bit - Conditional jt/jf targets replaced with jt/fall-through - Adds signed > and >= insns - 16 4-byte stack slots for register spill-fill replaced with up to 512 bytes of multi-use stack space - Introduction of bpf_call insn and register passing convention for zero overhead calls from/to other kernel functions - Adds arithmetic right shift and endianness conversion insns - Adds atomic_add insn - Old tax/txa insns are replaced with 'mov dst,src' insn Performance of two BPF filters generated by libpcap resp. bpf_asm was measured on x86_64, i386 and arm32 (other libpcap programs have similar performance differences): fprog #1 is taken from Documentation/networking/filter.txt: tcpdump -i eth0 port 22 -dd fprog #2 is taken from 'man tcpdump': tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)' -dd Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call, smaller is better: --x86_64-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 90 101 192 202 new BPF 31 71 47 97 old BPF jit 12 34 17 44 new BPF jit TBD --i386-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 107 136 227 252 new BPF 40 119 69 172 --arm32-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 202 300 475 540 new BPF 180 270 330 470 old BPF jit 26 182 37 202 new BPF jit TBD Thus, without changing any userland BPF filters, applications on top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf classifier, netfilter's xt_bpf, team driver's load-balancing mode, and many more will have better interpreter filtering performance. While we are replacing the internal BPF interpreter, we also need to convert seccomp BPF in the same step to make use of the new internal structure since it makes use of lower-level API details without being further decoupled through higher-level calls like sk_unattached_filter_{create,destroy}(), for example. Just as for normal socket filtering, also seccomp BPF experiences a time-to-verdict speedup: 05-sim-long_jumps.c of libseccomp was used as micro-benchmark: seccomp_rule_add_exact(ctx,... seccomp_rule_add_exact(ctx,... rc = seccomp_load(ctx); for (i = 0; i < 10000000; i++) syscall(199, 100); 'short filter' has 2 rules 'large filter' has 200 rules 'short filter' performance is slightly better on x86_64/i386/arm32 'large filter' is much faster on x86_64 and i386 and shows no difference on arm32 --x86_64-- short filter old BPF: 2.7 sec 39.12% bench libc-2.15.so [.] syscall 8.10% bench [kernel.kallsyms] [k] sk_run_filter 6.31% bench [kernel.kallsyms] [k] system_call 5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller 3.70% bench [kernel.kallsyms] [k] __secure_computing 3.67% bench [kernel.kallsyms] [k] lock_is_held 3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load new BPF: 2.58 sec 42.05% bench libc-2.15.so [.] syscall 6.91% bench [kernel.kallsyms] [k] system_call 6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 6.07% bench [kernel.kallsyms] [k] __secure_computing 5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp --arm32-- short filter old BPF: 4.0 sec 39.92% bench [kernel.kallsyms] [k] vector_swi 16.60% bench [kernel.kallsyms] [k] sk_run_filter 14.66% bench libc-2.17.so [.] syscall 5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load 5.10% bench [kernel.kallsyms] [k] __secure_computing new BPF: 3.7 sec 35.93% bench [kernel.kallsyms] [k] vector_swi 21.89% bench libc-2.17.so [.] syscall 13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 6.25% bench [kernel.kallsyms] [k] __secure_computing 3.96% bench [kernel.kallsyms] [k] syscall_trace_exit --x86_64-- large filter old BPF: 8.6 seconds 73.38% bench [kernel.kallsyms] [k] sk_run_filter 10.70% bench libc-2.15.so [.] syscall 5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.97% bench [kernel.kallsyms] [k] system_call new BPF: 5.7 seconds 66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 16.75% bench libc-2.15.so [.] syscall 3.31% bench [kernel.kallsyms] [k] system_call 2.88% bench [kernel.kallsyms] [k] __secure_computing --i386-- large filter old BPF: 5.4 sec new BPF: 3.8 sec --arm32-- large filter old BPF: 13.5 sec 73.88% bench [kernel.kallsyms] [k] sk_run_filter 10.29% bench [kernel.kallsyms] [k] vector_swi 6.46% bench libc-2.17.so [.] syscall 2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.19% bench [kernel.kallsyms] [k] __secure_computing 0.87% bench [kernel.kallsyms] [k] sys_getuid new BPF: 13.5 sec 76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 10.98% bench [kernel.kallsyms] [k] vector_swi 5.87% bench libc-2.17.so [.] syscall 1.77% bench [kernel.kallsyms] [k] __secure_computing 0.93% bench [kernel.kallsyms] [k] sys_getuid BPF filters generated by seccomp are very branchy, so the new internal BPF performance is better than the old one. Performance gains will be even higher when BPF JIT is committed for the new structure, which is planned in future work (as successive JIT migrations). BPF has also been stress-tested with trinity's BPF fuzzer. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Kees Cook <keescook@chromium.org> Cc: Paul Moore <pmoore@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: linux-kernel@vger.kernel.org Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
ftest->code = BPF_LDX | BPF_W | BPF_ABS;
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
/* 32-bit aligned and not out of bounds. */
if (k >= sizeof(struct seccomp_data) || k & 3)
return -EINVAL;
continue;
net: filter: get rid of BPF_S_* enum This patch finally allows us to get rid of the BPF_S_* enum. Currently, the code performs unnecessary encode and decode workarounds in seccomp and filter migration itself when a filter is being attached in order to overcome BPF_S_* encoding which is not used anymore by the new interpreter resp. JIT compilers. Keeping it around would mean that also in future we would need to extend and maintain this enum and related encoders/decoders. We can get rid of all that and save us these operations during filter attaching. Naturally, also JIT compilers need to be updated by this. Before JIT conversion is being done, each compiler checks if A is being loaded at startup to obtain information if it needs to emit instructions to clear A first. Since BPF extensions are a subset of BPF_LD | BPF_{W,H,B} | BPF_ABS variants, case statements for extensions can be removed at that point. To ease and minimalize code changes in the classic JITs, we have introduced bpf_anc_helper(). Tested with test_bpf on x86_64 (JIT, int), s390x (JIT, int), arm (JIT, int), i368 (int), ppc64 (JIT, int); for sparc we unfortunately didn't have access, but changes are analogous to the rest. Joint work with Alexei Starovoitov. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mircea Gherzan <mgherzan@gmail.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Chema Gonzalez <chemag@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29 08:22:50 +00:00
case BPF_LD | BPF_W | BPF_LEN:
net: filter: rework/optimize internal BPF interpreter's instruction set This patch replaces/reworks the kernel-internal BPF interpreter with an optimized BPF instruction set format that is modelled closer to mimic native instruction sets and is designed to be JITed with one to one mapping. Thus, the new interpreter is noticeably faster than the current implementation of sk_run_filter(); mainly for two reasons: 1. Fall-through jumps: BPF jump instructions are forced to go either 'true' or 'false' branch which causes branch-miss penalty. The new BPF jump instructions have only one branch and fall-through otherwise, which fits the CPU branch predictor logic better. `perf stat` shows drastic difference for branch-misses between the old and new code. 2. Jump-threaded implementation of interpreter vs switch statement: Instead of single table-jump at the top of 'switch' statement, gcc will now generate multiple table-jump instructions, which helps CPU branch predictor logic. Note that the verification of filters is still being done through sk_chk_filter() in classical BPF format, so filters from user- or kernel space are verified in the same way as we do now, and same restrictions/constraints hold as well. We reuse current BPF JIT compilers in a way that this upgrade would even be fine as is, but nevertheless allows for a successive upgrade of BPF JIT compilers to the new format. The internal instruction set migration is being done after the probing for JIT compilation, so in case JIT compilers are able to create a native opcode image, we're going to use that, and in all other cases we're doing a follow-up migration of the BPF program's instruction set, so that it can be transparently run in the new interpreter. In short, the *internal* format extends BPF in the following way (more details can be taken from the appended documentation): - Number of registers increase from 2 to 10 - Register width increases from 32-bit to 64-bit - Conditional jt/jf targets replaced with jt/fall-through - Adds signed > and >= insns - 16 4-byte stack slots for register spill-fill replaced with up to 512 bytes of multi-use stack space - Introduction of bpf_call insn and register passing convention for zero overhead calls from/to other kernel functions - Adds arithmetic right shift and endianness conversion insns - Adds atomic_add insn - Old tax/txa insns are replaced with 'mov dst,src' insn Performance of two BPF filters generated by libpcap resp. bpf_asm was measured on x86_64, i386 and arm32 (other libpcap programs have similar performance differences): fprog #1 is taken from Documentation/networking/filter.txt: tcpdump -i eth0 port 22 -dd fprog #2 is taken from 'man tcpdump': tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)' -dd Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call, smaller is better: --x86_64-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 90 101 192 202 new BPF 31 71 47 97 old BPF jit 12 34 17 44 new BPF jit TBD --i386-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 107 136 227 252 new BPF 40 119 69 172 --arm32-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 202 300 475 540 new BPF 180 270 330 470 old BPF jit 26 182 37 202 new BPF jit TBD Thus, without changing any userland BPF filters, applications on top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf classifier, netfilter's xt_bpf, team driver's load-balancing mode, and many more will have better interpreter filtering performance. While we are replacing the internal BPF interpreter, we also need to convert seccomp BPF in the same step to make use of the new internal structure since it makes use of lower-level API details without being further decoupled through higher-level calls like sk_unattached_filter_{create,destroy}(), for example. Just as for normal socket filtering, also seccomp BPF experiences a time-to-verdict speedup: 05-sim-long_jumps.c of libseccomp was used as micro-benchmark: seccomp_rule_add_exact(ctx,... seccomp_rule_add_exact(ctx,... rc = seccomp_load(ctx); for (i = 0; i < 10000000; i++) syscall(199, 100); 'short filter' has 2 rules 'large filter' has 200 rules 'short filter' performance is slightly better on x86_64/i386/arm32 'large filter' is much faster on x86_64 and i386 and shows no difference on arm32 --x86_64-- short filter old BPF: 2.7 sec 39.12% bench libc-2.15.so [.] syscall 8.10% bench [kernel.kallsyms] [k] sk_run_filter 6.31% bench [kernel.kallsyms] [k] system_call 5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller 3.70% bench [kernel.kallsyms] [k] __secure_computing 3.67% bench [kernel.kallsyms] [k] lock_is_held 3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load new BPF: 2.58 sec 42.05% bench libc-2.15.so [.] syscall 6.91% bench [kernel.kallsyms] [k] system_call 6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 6.07% bench [kernel.kallsyms] [k] __secure_computing 5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp --arm32-- short filter old BPF: 4.0 sec 39.92% bench [kernel.kallsyms] [k] vector_swi 16.60% bench [kernel.kallsyms] [k] sk_run_filter 14.66% bench libc-2.17.so [.] syscall 5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load 5.10% bench [kernel.kallsyms] [k] __secure_computing new BPF: 3.7 sec 35.93% bench [kernel.kallsyms] [k] vector_swi 21.89% bench libc-2.17.so [.] syscall 13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 6.25% bench [kernel.kallsyms] [k] __secure_computing 3.96% bench [kernel.kallsyms] [k] syscall_trace_exit --x86_64-- large filter old BPF: 8.6 seconds 73.38% bench [kernel.kallsyms] [k] sk_run_filter 10.70% bench libc-2.15.so [.] syscall 5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.97% bench [kernel.kallsyms] [k] system_call new BPF: 5.7 seconds 66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 16.75% bench libc-2.15.so [.] syscall 3.31% bench [kernel.kallsyms] [k] system_call 2.88% bench [kernel.kallsyms] [k] __secure_computing --i386-- large filter old BPF: 5.4 sec new BPF: 3.8 sec --arm32-- large filter old BPF: 13.5 sec 73.88% bench [kernel.kallsyms] [k] sk_run_filter 10.29% bench [kernel.kallsyms] [k] vector_swi 6.46% bench libc-2.17.so [.] syscall 2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.19% bench [kernel.kallsyms] [k] __secure_computing 0.87% bench [kernel.kallsyms] [k] sys_getuid new BPF: 13.5 sec 76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 10.98% bench [kernel.kallsyms] [k] vector_swi 5.87% bench libc-2.17.so [.] syscall 1.77% bench [kernel.kallsyms] [k] __secure_computing 0.93% bench [kernel.kallsyms] [k] sys_getuid BPF filters generated by seccomp are very branchy, so the new internal BPF performance is better than the old one. Performance gains will be even higher when BPF JIT is committed for the new structure, which is planned in future work (as successive JIT migrations). BPF has also been stress-tested with trinity's BPF fuzzer. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Kees Cook <keescook@chromium.org> Cc: Paul Moore <pmoore@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: linux-kernel@vger.kernel.org Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
ftest->code = BPF_LD | BPF_IMM;
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
ftest->k = sizeof(struct seccomp_data);
continue;
net: filter: get rid of BPF_S_* enum This patch finally allows us to get rid of the BPF_S_* enum. Currently, the code performs unnecessary encode and decode workarounds in seccomp and filter migration itself when a filter is being attached in order to overcome BPF_S_* encoding which is not used anymore by the new interpreter resp. JIT compilers. Keeping it around would mean that also in future we would need to extend and maintain this enum and related encoders/decoders. We can get rid of all that and save us these operations during filter attaching. Naturally, also JIT compilers need to be updated by this. Before JIT conversion is being done, each compiler checks if A is being loaded at startup to obtain information if it needs to emit instructions to clear A first. Since BPF extensions are a subset of BPF_LD | BPF_{W,H,B} | BPF_ABS variants, case statements for extensions can be removed at that point. To ease and minimalize code changes in the classic JITs, we have introduced bpf_anc_helper(). Tested with test_bpf on x86_64 (JIT, int), s390x (JIT, int), arm (JIT, int), i368 (int), ppc64 (JIT, int); for sparc we unfortunately didn't have access, but changes are analogous to the rest. Joint work with Alexei Starovoitov. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mircea Gherzan <mgherzan@gmail.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Chema Gonzalez <chemag@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29 08:22:50 +00:00
case BPF_LDX | BPF_W | BPF_LEN:
net: filter: rework/optimize internal BPF interpreter's instruction set This patch replaces/reworks the kernel-internal BPF interpreter with an optimized BPF instruction set format that is modelled closer to mimic native instruction sets and is designed to be JITed with one to one mapping. Thus, the new interpreter is noticeably faster than the current implementation of sk_run_filter(); mainly for two reasons: 1. Fall-through jumps: BPF jump instructions are forced to go either 'true' or 'false' branch which causes branch-miss penalty. The new BPF jump instructions have only one branch and fall-through otherwise, which fits the CPU branch predictor logic better. `perf stat` shows drastic difference for branch-misses between the old and new code. 2. Jump-threaded implementation of interpreter vs switch statement: Instead of single table-jump at the top of 'switch' statement, gcc will now generate multiple table-jump instructions, which helps CPU branch predictor logic. Note that the verification of filters is still being done through sk_chk_filter() in classical BPF format, so filters from user- or kernel space are verified in the same way as we do now, and same restrictions/constraints hold as well. We reuse current BPF JIT compilers in a way that this upgrade would even be fine as is, but nevertheless allows for a successive upgrade of BPF JIT compilers to the new format. The internal instruction set migration is being done after the probing for JIT compilation, so in case JIT compilers are able to create a native opcode image, we're going to use that, and in all other cases we're doing a follow-up migration of the BPF program's instruction set, so that it can be transparently run in the new interpreter. In short, the *internal* format extends BPF in the following way (more details can be taken from the appended documentation): - Number of registers increase from 2 to 10 - Register width increases from 32-bit to 64-bit - Conditional jt/jf targets replaced with jt/fall-through - Adds signed > and >= insns - 16 4-byte stack slots for register spill-fill replaced with up to 512 bytes of multi-use stack space - Introduction of bpf_call insn and register passing convention for zero overhead calls from/to other kernel functions - Adds arithmetic right shift and endianness conversion insns - Adds atomic_add insn - Old tax/txa insns are replaced with 'mov dst,src' insn Performance of two BPF filters generated by libpcap resp. bpf_asm was measured on x86_64, i386 and arm32 (other libpcap programs have similar performance differences): fprog #1 is taken from Documentation/networking/filter.txt: tcpdump -i eth0 port 22 -dd fprog #2 is taken from 'man tcpdump': tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)' -dd Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call, smaller is better: --x86_64-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 90 101 192 202 new BPF 31 71 47 97 old BPF jit 12 34 17 44 new BPF jit TBD --i386-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 107 136 227 252 new BPF 40 119 69 172 --arm32-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 202 300 475 540 new BPF 180 270 330 470 old BPF jit 26 182 37 202 new BPF jit TBD Thus, without changing any userland BPF filters, applications on top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf classifier, netfilter's xt_bpf, team driver's load-balancing mode, and many more will have better interpreter filtering performance. While we are replacing the internal BPF interpreter, we also need to convert seccomp BPF in the same step to make use of the new internal structure since it makes use of lower-level API details without being further decoupled through higher-level calls like sk_unattached_filter_{create,destroy}(), for example. Just as for normal socket filtering, also seccomp BPF experiences a time-to-verdict speedup: 05-sim-long_jumps.c of libseccomp was used as micro-benchmark: seccomp_rule_add_exact(ctx,... seccomp_rule_add_exact(ctx,... rc = seccomp_load(ctx); for (i = 0; i < 10000000; i++) syscall(199, 100); 'short filter' has 2 rules 'large filter' has 200 rules 'short filter' performance is slightly better on x86_64/i386/arm32 'large filter' is much faster on x86_64 and i386 and shows no difference on arm32 --x86_64-- short filter old BPF: 2.7 sec 39.12% bench libc-2.15.so [.] syscall 8.10% bench [kernel.kallsyms] [k] sk_run_filter 6.31% bench [kernel.kallsyms] [k] system_call 5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller 3.70% bench [kernel.kallsyms] [k] __secure_computing 3.67% bench [kernel.kallsyms] [k] lock_is_held 3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load new BPF: 2.58 sec 42.05% bench libc-2.15.so [.] syscall 6.91% bench [kernel.kallsyms] [k] system_call 6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 6.07% bench [kernel.kallsyms] [k] __secure_computing 5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp --arm32-- short filter old BPF: 4.0 sec 39.92% bench [kernel.kallsyms] [k] vector_swi 16.60% bench [kernel.kallsyms] [k] sk_run_filter 14.66% bench libc-2.17.so [.] syscall 5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load 5.10% bench [kernel.kallsyms] [k] __secure_computing new BPF: 3.7 sec 35.93% bench [kernel.kallsyms] [k] vector_swi 21.89% bench libc-2.17.so [.] syscall 13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 6.25% bench [kernel.kallsyms] [k] __secure_computing 3.96% bench [kernel.kallsyms] [k] syscall_trace_exit --x86_64-- large filter old BPF: 8.6 seconds 73.38% bench [kernel.kallsyms] [k] sk_run_filter 10.70% bench libc-2.15.so [.] syscall 5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.97% bench [kernel.kallsyms] [k] system_call new BPF: 5.7 seconds 66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 16.75% bench libc-2.15.so [.] syscall 3.31% bench [kernel.kallsyms] [k] system_call 2.88% bench [kernel.kallsyms] [k] __secure_computing --i386-- large filter old BPF: 5.4 sec new BPF: 3.8 sec --arm32-- large filter old BPF: 13.5 sec 73.88% bench [kernel.kallsyms] [k] sk_run_filter 10.29% bench [kernel.kallsyms] [k] vector_swi 6.46% bench libc-2.17.so [.] syscall 2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.19% bench [kernel.kallsyms] [k] __secure_computing 0.87% bench [kernel.kallsyms] [k] sys_getuid new BPF: 13.5 sec 76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 10.98% bench [kernel.kallsyms] [k] vector_swi 5.87% bench libc-2.17.so [.] syscall 1.77% bench [kernel.kallsyms] [k] __secure_computing 0.93% bench [kernel.kallsyms] [k] sys_getuid BPF filters generated by seccomp are very branchy, so the new internal BPF performance is better than the old one. Performance gains will be even higher when BPF JIT is committed for the new structure, which is planned in future work (as successive JIT migrations). BPF has also been stress-tested with trinity's BPF fuzzer. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Kees Cook <keescook@chromium.org> Cc: Paul Moore <pmoore@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: linux-kernel@vger.kernel.org Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
ftest->code = BPF_LDX | BPF_IMM;
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
ftest->k = sizeof(struct seccomp_data);
continue;
/* Explicitly include allowed calls. */
net: filter: get rid of BPF_S_* enum This patch finally allows us to get rid of the BPF_S_* enum. Currently, the code performs unnecessary encode and decode workarounds in seccomp and filter migration itself when a filter is being attached in order to overcome BPF_S_* encoding which is not used anymore by the new interpreter resp. JIT compilers. Keeping it around would mean that also in future we would need to extend and maintain this enum and related encoders/decoders. We can get rid of all that and save us these operations during filter attaching. Naturally, also JIT compilers need to be updated by this. Before JIT conversion is being done, each compiler checks if A is being loaded at startup to obtain information if it needs to emit instructions to clear A first. Since BPF extensions are a subset of BPF_LD | BPF_{W,H,B} | BPF_ABS variants, case statements for extensions can be removed at that point. To ease and minimalize code changes in the classic JITs, we have introduced bpf_anc_helper(). Tested with test_bpf on x86_64 (JIT, int), s390x (JIT, int), arm (JIT, int), i368 (int), ppc64 (JIT, int); for sparc we unfortunately didn't have access, but changes are analogous to the rest. Joint work with Alexei Starovoitov. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mircea Gherzan <mgherzan@gmail.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Chema Gonzalez <chemag@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29 08:22:50 +00:00
case BPF_RET | BPF_K:
case BPF_RET | BPF_A:
case BPF_ALU | BPF_ADD | BPF_K:
case BPF_ALU | BPF_ADD | BPF_X:
case BPF_ALU | BPF_SUB | BPF_K:
case BPF_ALU | BPF_SUB | BPF_X:
case BPF_ALU | BPF_MUL | BPF_K:
case BPF_ALU | BPF_MUL | BPF_X:
case BPF_ALU | BPF_DIV | BPF_K:
case BPF_ALU | BPF_DIV | BPF_X:
case BPF_ALU | BPF_AND | BPF_K:
case BPF_ALU | BPF_AND | BPF_X:
case BPF_ALU | BPF_OR | BPF_K:
case BPF_ALU | BPF_OR | BPF_X:
case BPF_ALU | BPF_XOR | BPF_K:
case BPF_ALU | BPF_XOR | BPF_X:
case BPF_ALU | BPF_LSH | BPF_K:
case BPF_ALU | BPF_LSH | BPF_X:
case BPF_ALU | BPF_RSH | BPF_K:
case BPF_ALU | BPF_RSH | BPF_X:
case BPF_ALU | BPF_NEG:
case BPF_LD | BPF_IMM:
case BPF_LDX | BPF_IMM:
case BPF_MISC | BPF_TAX:
case BPF_MISC | BPF_TXA:
case BPF_LD | BPF_MEM:
case BPF_LDX | BPF_MEM:
case BPF_ST:
case BPF_STX:
case BPF_JMP | BPF_JA:
case BPF_JMP | BPF_JEQ | BPF_K:
case BPF_JMP | BPF_JEQ | BPF_X:
case BPF_JMP | BPF_JGE | BPF_K:
case BPF_JMP | BPF_JGE | BPF_X:
case BPF_JMP | BPF_JGT | BPF_K:
case BPF_JMP | BPF_JGT | BPF_X:
case BPF_JMP | BPF_JSET | BPF_K:
case BPF_JMP | BPF_JSET | BPF_X:
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
continue;
default:
return -EINVAL;
}
}
return 0;
}
seccomp/cache: Lookup syscall allowlist bitmap for fast path The overhead of running Seccomp filters has been part of some past discussions [1][2][3]. Oftentimes, the filters have a large number of instructions that check syscall numbers one by one and jump based on that. Some users chain BPF filters which further enlarge the overhead. A recent work [6] comprehensively measures the Seccomp overhead and shows that the overhead is non-negligible and has a non-trivial impact on application performance. We observed some common filters, such as docker's [4] or systemd's [5], will make most decisions based only on the syscall numbers, and as past discussions considered, a bitmap where each bit represents a syscall makes most sense for these filters. The fast (common) path for seccomp should be that the filter permits the syscall to pass through, and failing seccomp is expected to be an exceptional case; it is not expected for userspace to call a denylisted syscall over and over. When it can be concluded that an allow must occur for the given architecture and syscall pair (this determination is introduced in the next commit), seccomp will immediately allow the syscall, bypassing further BPF execution. Each architecture number has its own bitmap. The architecture number in seccomp_data is checked against the defined architecture number constant before proceeding to test the bit against the bitmap with the syscall number as the index of the bit in the bitmap, and if the bit is set, seccomp returns allow. The bitmaps are all clear in this patch and will be initialized in the next commit. When only one architecture exists, the check against architecture number is skipped, suggested by Kees Cook [7]. [1] https://lore.kernel.org/linux-security-module/c22a6c3cefc2412cad00ae14c1371711@huawei.com/T/ [2] https://lore.kernel.org/lkml/202005181120.971232B7B@keescook/T/ [3] https://github.com/seccomp/libseccomp/issues/116 [4] https://github.com/moby/moby/blob/ae0ef82b90356ac613f329a8ef5ee42ca923417d/profiles/seccomp/default.json [5] https://github.com/systemd/systemd/blob/6743a1caf4037f03dc51a1277855018e4ab61957/src/shared/seccomp-util.c#L270 [6] Draco: Architectural and Operating System Support for System Call Security https://tianyin.github.io/pub/draco.pdf, MICRO-53, Oct. 2020 [7] https://lore.kernel.org/bpf/202010091614.8BB0EB64@keescook/ Co-developed-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu> Signed-off-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu> Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu> Reviewed-by: Jann Horn <jannh@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/10f91a367ec4fcdea7fc3f086de3f5f13a4a7436.1602431034.git.yifeifz2@illinois.edu
2020-10-11 15:47:42 +00:00
#ifdef SECCOMP_ARCH_NATIVE
static inline bool seccomp_cache_check_allow_bitmap(const void *bitmap,
size_t bitmap_size,
int syscall_nr)
{
if (unlikely(syscall_nr < 0 || syscall_nr >= bitmap_size))
return false;
syscall_nr = array_index_nospec(syscall_nr, bitmap_size);
return test_bit(syscall_nr, bitmap);
}
/**
* seccomp_cache_check_allow - lookup seccomp cache
* @sfilter: The seccomp filter
* @sd: The seccomp data to lookup the cache with
*
* Returns true if the seccomp_data is cached and allowed.
*/
static inline bool seccomp_cache_check_allow(const struct seccomp_filter *sfilter,
const struct seccomp_data *sd)
{
int syscall_nr = sd->nr;
const struct action_cache *cache = &sfilter->cache;
#ifndef SECCOMP_ARCH_COMPAT
/* A native-only architecture doesn't need to check sd->arch. */
return seccomp_cache_check_allow_bitmap(cache->allow_native,
SECCOMP_ARCH_NATIVE_NR,
syscall_nr);
#else
if (likely(sd->arch == SECCOMP_ARCH_NATIVE))
return seccomp_cache_check_allow_bitmap(cache->allow_native,
SECCOMP_ARCH_NATIVE_NR,
syscall_nr);
if (likely(sd->arch == SECCOMP_ARCH_COMPAT))
return seccomp_cache_check_allow_bitmap(cache->allow_compat,
SECCOMP_ARCH_COMPAT_NR,
syscall_nr);
#endif /* SECCOMP_ARCH_COMPAT */
WARN_ON_ONCE(true);
return false;
}
#endif /* SECCOMP_ARCH_NATIVE */
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
/**
* seccomp_run_filters - evaluates all seccomp filters against @sd
* @sd: optional seccomp data to be passed to filters
* @match: stores struct seccomp_filter that resulted in the return value,
* unless filter returned SECCOMP_RET_ALLOW, in which case it will
* be unchanged.
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
*
* Returns valid seccomp BPF response codes.
*/
seccomp: Implement SECCOMP_RET_KILL_PROCESS action Right now, SECCOMP_RET_KILL_THREAD (neé SECCOMP_RET_KILL) kills the current thread. There have been a few requests for this to kill the entire process (the thread group). This cannot be just changed (discovered when adding coredump support since coredumping kills the entire process) because there are userspace programs depending on the thread-kill behavior. Instead, implement SECCOMP_RET_KILL_PROCESS, which is 0x80000000, and can be processed as "-1" by the kernel, below the existing RET_KILL that is ABI-set to "0". For userspace, SECCOMP_RET_ACTION_FULL is added to expand the mask to the signed bit. Old userspace using the SECCOMP_RET_ACTION mask will see SECCOMP_RET_KILL_PROCESS as 0 still, but this would only be visible when examining the siginfo in a core dump from a RET_KILL_*, where it will think it was thread-killed instead of process-killed. Attempts to introduce this behavior via other ways (filter flags, seccomp struct flags, masked RET_DATA bits) all come with weird side-effects and baggage. This change preserves the central behavioral expectations of the seccomp filter engine without putting too great a burden on changes needed in userspace to use the new action. The new action is discoverable by userspace through either the new actions_avail sysctl or through the SECCOMP_GET_ACTION_AVAIL seccomp operation. If used without checking for availability, old kernels will treat RET_KILL_PROCESS as RET_KILL_THREAD (since the old mask will produce RET_KILL_THREAD). Cc: Paul Moore <paul@paul-moore.com> Cc: Fabricio Voznika <fvoznika@google.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 20:12:11 +00:00
#define ACTION_ONLY(ret) ((s32)((ret) & (SECCOMP_RET_ACTION_FULL)))
static u32 seccomp_run_filters(const struct seccomp_data *sd,
struct seccomp_filter **match)
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
{
seccomp: add SECCOMP_RET_ERRNO This change adds the SECCOMP_RET_ERRNO as a valid return value from a seccomp filter. Additionally, it makes the first use of the lower 16-bits for storing a filter-supplied errno. 16-bits is more than enough for the errno-base.h calls. Returning errors instead of immediately terminating processes that violate seccomp policy allow for broader use of this functionality for kernel attack surface reduction. For example, a linux container could maintain a whitelist of pre-existing system calls but drop all new ones with errnos. This would keep a logically static attack surface while providing errnos that may allow for graceful failure without the downside of do_exit() on a bad call. This change also changes the signature of __secure_computing. It appears the only direct caller is the arm entry code and it clobbers any possible return value (register) immediately. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Eric Paris <eparis@redhat.com> v18: - fix up comments and rebase - fix bad var name which was fixed in later revs - remove _int() and just change the __secure_computing signature v16-v17: ... v15: - use audit_seccomp and add a skip label. (eparis@redhat.com) - clean up and pad out return codes (indan@nul.nu) v14: - no change/rebase v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - move to WARN_ON if filter is NULL (oleg@redhat.com, luto@mit.edu, keescook@chromium.org) - return immediately for filter==NULL (keescook@chromium.org) - change evaluation to only compare the ACTION so that layered errnos don't result in the lowest one being returned. (keeschook@chromium.org) v11: - check for NULL filter (keescook@chromium.org) v10: - change loaders to fn v9: - n/a v8: - update Kconfig to note new need for syscall_set_return_value. - reordered such that TRAP behavior follows on later. - made the for loop a little less indent-y v7: - introduced Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:59 +00:00
u32 ret = SECCOMP_RET_ALLOW;
/* Make sure cross-thread synced filter points somewhere sane. */
struct seccomp_filter *f =
READ_ONCE(current->seccomp.filter);
seccomp: add SECCOMP_RET_ERRNO This change adds the SECCOMP_RET_ERRNO as a valid return value from a seccomp filter. Additionally, it makes the first use of the lower 16-bits for storing a filter-supplied errno. 16-bits is more than enough for the errno-base.h calls. Returning errors instead of immediately terminating processes that violate seccomp policy allow for broader use of this functionality for kernel attack surface reduction. For example, a linux container could maintain a whitelist of pre-existing system calls but drop all new ones with errnos. This would keep a logically static attack surface while providing errnos that may allow for graceful failure without the downside of do_exit() on a bad call. This change also changes the signature of __secure_computing. It appears the only direct caller is the arm entry code and it clobbers any possible return value (register) immediately. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Eric Paris <eparis@redhat.com> v18: - fix up comments and rebase - fix bad var name which was fixed in later revs - remove _int() and just change the __secure_computing signature v16-v17: ... v15: - use audit_seccomp and add a skip label. (eparis@redhat.com) - clean up and pad out return codes (indan@nul.nu) v14: - no change/rebase v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - move to WARN_ON if filter is NULL (oleg@redhat.com, luto@mit.edu, keescook@chromium.org) - return immediately for filter==NULL (keescook@chromium.org) - change evaluation to only compare the ACTION so that layered errnos don't result in the lowest one being returned. (keeschook@chromium.org) v11: - check for NULL filter (keescook@chromium.org) v10: - change loaders to fn v9: - n/a v8: - update Kconfig to note new need for syscall_set_return_value. - reordered such that TRAP behavior follows on later. - made the for loop a little less indent-y v7: - introduced Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:59 +00:00
/* Ensure unexpected behavior doesn't result in failing open. */
if (WARN_ON(f == NULL))
return SECCOMP_RET_KILL_PROCESS;
seccomp: add SECCOMP_RET_ERRNO This change adds the SECCOMP_RET_ERRNO as a valid return value from a seccomp filter. Additionally, it makes the first use of the lower 16-bits for storing a filter-supplied errno. 16-bits is more than enough for the errno-base.h calls. Returning errors instead of immediately terminating processes that violate seccomp policy allow for broader use of this functionality for kernel attack surface reduction. For example, a linux container could maintain a whitelist of pre-existing system calls but drop all new ones with errnos. This would keep a logically static attack surface while providing errnos that may allow for graceful failure without the downside of do_exit() on a bad call. This change also changes the signature of __secure_computing. It appears the only direct caller is the arm entry code and it clobbers any possible return value (register) immediately. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Eric Paris <eparis@redhat.com> v18: - fix up comments and rebase - fix bad var name which was fixed in later revs - remove _int() and just change the __secure_computing signature v16-v17: ... v15: - use audit_seccomp and add a skip label. (eparis@redhat.com) - clean up and pad out return codes (indan@nul.nu) v14: - no change/rebase v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - move to WARN_ON if filter is NULL (oleg@redhat.com, luto@mit.edu, keescook@chromium.org) - return immediately for filter==NULL (keescook@chromium.org) - change evaluation to only compare the ACTION so that layered errnos don't result in the lowest one being returned. (keeschook@chromium.org) v11: - check for NULL filter (keescook@chromium.org) v10: - change loaders to fn v9: - n/a v8: - update Kconfig to note new need for syscall_set_return_value. - reordered such that TRAP behavior follows on later. - made the for loop a little less indent-y v7: - introduced Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:59 +00:00
seccomp/cache: Lookup syscall allowlist bitmap for fast path The overhead of running Seccomp filters has been part of some past discussions [1][2][3]. Oftentimes, the filters have a large number of instructions that check syscall numbers one by one and jump based on that. Some users chain BPF filters which further enlarge the overhead. A recent work [6] comprehensively measures the Seccomp overhead and shows that the overhead is non-negligible and has a non-trivial impact on application performance. We observed some common filters, such as docker's [4] or systemd's [5], will make most decisions based only on the syscall numbers, and as past discussions considered, a bitmap where each bit represents a syscall makes most sense for these filters. The fast (common) path for seccomp should be that the filter permits the syscall to pass through, and failing seccomp is expected to be an exceptional case; it is not expected for userspace to call a denylisted syscall over and over. When it can be concluded that an allow must occur for the given architecture and syscall pair (this determination is introduced in the next commit), seccomp will immediately allow the syscall, bypassing further BPF execution. Each architecture number has its own bitmap. The architecture number in seccomp_data is checked against the defined architecture number constant before proceeding to test the bit against the bitmap with the syscall number as the index of the bit in the bitmap, and if the bit is set, seccomp returns allow. The bitmaps are all clear in this patch and will be initialized in the next commit. When only one architecture exists, the check against architecture number is skipped, suggested by Kees Cook [7]. [1] https://lore.kernel.org/linux-security-module/c22a6c3cefc2412cad00ae14c1371711@huawei.com/T/ [2] https://lore.kernel.org/lkml/202005181120.971232B7B@keescook/T/ [3] https://github.com/seccomp/libseccomp/issues/116 [4] https://github.com/moby/moby/blob/ae0ef82b90356ac613f329a8ef5ee42ca923417d/profiles/seccomp/default.json [5] https://github.com/systemd/systemd/blob/6743a1caf4037f03dc51a1277855018e4ab61957/src/shared/seccomp-util.c#L270 [6] Draco: Architectural and Operating System Support for System Call Security https://tianyin.github.io/pub/draco.pdf, MICRO-53, Oct. 2020 [7] https://lore.kernel.org/bpf/202010091614.8BB0EB64@keescook/ Co-developed-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu> Signed-off-by: Dimitrios Skarlatos <dskarlat@cs.cmu.edu> Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu> Reviewed-by: Jann Horn <jannh@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/10f91a367ec4fcdea7fc3f086de3f5f13a4a7436.1602431034.git.yifeifz2@illinois.edu
2020-10-11 15:47:42 +00:00
if (seccomp_cache_check_allow(f, sd))
return SECCOMP_RET_ALLOW;
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
/*
* All filters in the list are evaluated and the lowest BPF return
seccomp: add SECCOMP_RET_ERRNO This change adds the SECCOMP_RET_ERRNO as a valid return value from a seccomp filter. Additionally, it makes the first use of the lower 16-bits for storing a filter-supplied errno. 16-bits is more than enough for the errno-base.h calls. Returning errors instead of immediately terminating processes that violate seccomp policy allow for broader use of this functionality for kernel attack surface reduction. For example, a linux container could maintain a whitelist of pre-existing system calls but drop all new ones with errnos. This would keep a logically static attack surface while providing errnos that may allow for graceful failure without the downside of do_exit() on a bad call. This change also changes the signature of __secure_computing. It appears the only direct caller is the arm entry code and it clobbers any possible return value (register) immediately. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Eric Paris <eparis@redhat.com> v18: - fix up comments and rebase - fix bad var name which was fixed in later revs - remove _int() and just change the __secure_computing signature v16-v17: ... v15: - use audit_seccomp and add a skip label. (eparis@redhat.com) - clean up and pad out return codes (indan@nul.nu) v14: - no change/rebase v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - move to WARN_ON if filter is NULL (oleg@redhat.com, luto@mit.edu, keescook@chromium.org) - return immediately for filter==NULL (keescook@chromium.org) - change evaluation to only compare the ACTION so that layered errnos don't result in the lowest one being returned. (keeschook@chromium.org) v11: - check for NULL filter (keescook@chromium.org) v10: - change loaders to fn v9: - n/a v8: - update Kconfig to note new need for syscall_set_return_value. - reordered such that TRAP behavior follows on later. - made the for loop a little less indent-y v7: - introduced Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:59 +00:00
* value always takes priority (ignoring the DATA).
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
*/
for (; f; f = f->prev) {
u32 cur_ret = bpf_prog_run_pin_on_cpu(f->prog, sd);
seccomp: Implement SECCOMP_RET_KILL_PROCESS action Right now, SECCOMP_RET_KILL_THREAD (neé SECCOMP_RET_KILL) kills the current thread. There have been a few requests for this to kill the entire process (the thread group). This cannot be just changed (discovered when adding coredump support since coredumping kills the entire process) because there are userspace programs depending on the thread-kill behavior. Instead, implement SECCOMP_RET_KILL_PROCESS, which is 0x80000000, and can be processed as "-1" by the kernel, below the existing RET_KILL that is ABI-set to "0". For userspace, SECCOMP_RET_ACTION_FULL is added to expand the mask to the signed bit. Old userspace using the SECCOMP_RET_ACTION mask will see SECCOMP_RET_KILL_PROCESS as 0 still, but this would only be visible when examining the siginfo in a core dump from a RET_KILL_*, where it will think it was thread-killed instead of process-killed. Attempts to introduce this behavior via other ways (filter flags, seccomp struct flags, masked RET_DATA bits) all come with weird side-effects and baggage. This change preserves the central behavioral expectations of the seccomp filter engine without putting too great a burden on changes needed in userspace to use the new action. The new action is discoverable by userspace through either the new actions_avail sysctl or through the SECCOMP_GET_ACTION_AVAIL seccomp operation. If used without checking for availability, old kernels will treat RET_KILL_PROCESS as RET_KILL_THREAD (since the old mask will produce RET_KILL_THREAD). Cc: Paul Moore <paul@paul-moore.com> Cc: Fabricio Voznika <fvoznika@google.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 20:12:11 +00:00
if (ACTION_ONLY(cur_ret) < ACTION_ONLY(ret)) {
seccomp: add SECCOMP_RET_ERRNO This change adds the SECCOMP_RET_ERRNO as a valid return value from a seccomp filter. Additionally, it makes the first use of the lower 16-bits for storing a filter-supplied errno. 16-bits is more than enough for the errno-base.h calls. Returning errors instead of immediately terminating processes that violate seccomp policy allow for broader use of this functionality for kernel attack surface reduction. For example, a linux container could maintain a whitelist of pre-existing system calls but drop all new ones with errnos. This would keep a logically static attack surface while providing errnos that may allow for graceful failure without the downside of do_exit() on a bad call. This change also changes the signature of __secure_computing. It appears the only direct caller is the arm entry code and it clobbers any possible return value (register) immediately. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Eric Paris <eparis@redhat.com> v18: - fix up comments and rebase - fix bad var name which was fixed in later revs - remove _int() and just change the __secure_computing signature v16-v17: ... v15: - use audit_seccomp and add a skip label. (eparis@redhat.com) - clean up and pad out return codes (indan@nul.nu) v14: - no change/rebase v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - move to WARN_ON if filter is NULL (oleg@redhat.com, luto@mit.edu, keescook@chromium.org) - return immediately for filter==NULL (keescook@chromium.org) - change evaluation to only compare the ACTION so that layered errnos don't result in the lowest one being returned. (keeschook@chromium.org) v11: - check for NULL filter (keescook@chromium.org) v10: - change loaders to fn v9: - n/a v8: - update Kconfig to note new need for syscall_set_return_value. - reordered such that TRAP behavior follows on later. - made the for loop a little less indent-y v7: - introduced Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:59 +00:00
ret = cur_ret;
*match = f;
}
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
}
return ret;
}
#endif /* CONFIG_SECCOMP_FILTER */
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
static inline bool seccomp_may_assign_mode(unsigned long seccomp_mode)
{
assert_spin_locked(&current->sighand->siglock);
if (current->seccomp.mode && current->seccomp.mode != seccomp_mode)
return false;
return true;
}
void __weak arch_seccomp_spec_mitigate(struct task_struct *task) { }
static inline void seccomp_assign_mode(struct task_struct *task,
unsigned long seccomp_mode,
unsigned long flags)
{
assert_spin_locked(&task->sighand->siglock);
task->seccomp.mode = seccomp_mode;
/*
* Make sure SYSCALL_WORK_SECCOMP cannot be set before the mode (and
* filter) is set.
*/
smp_mb__before_atomic();
/* Assume default seccomp processes want spec flaw mitigation. */
if ((flags & SECCOMP_FILTER_FLAG_SPEC_ALLOW) == 0)
arch_seccomp_spec_mitigate(task);
set_task_syscall_work(task, SECCOMP);
}
#ifdef CONFIG_SECCOMP_FILTER
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
/* Returns 1 if the parent is an ancestor of the child. */
static int is_ancestor(struct seccomp_filter *parent,
struct seccomp_filter *child)
{
/* NULL is the root ancestor. */
if (parent == NULL)
return 1;
for (; child; child = child->prev)
if (child == parent)
return 1;
return 0;
}
/**
* seccomp_can_sync_threads: checks if all threads can be synchronized
*
* Expects sighand and cred_guard_mutex locks to be held.
*
* Returns 0 on success, -ve on error, or the pid of a thread which was
* either not in the correct seccomp mode or did not have an ancestral
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
* seccomp filter.
*/
static inline pid_t seccomp_can_sync_threads(void)
{
struct task_struct *thread, *caller;
BUG_ON(!mutex_is_locked(&current->signal->cred_guard_mutex));
assert_spin_locked(&current->sighand->siglock);
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
/* Validate all threads being eligible for synchronization. */
caller = current;
for_each_thread(caller, thread) {
pid_t failed;
/* Skip current, since it is initiating the sync. */
if (thread == caller)
continue;
if (thread->seccomp.mode == SECCOMP_MODE_DISABLED ||
(thread->seccomp.mode == SECCOMP_MODE_FILTER &&
is_ancestor(thread->seccomp.filter,
caller->seccomp.filter)))
continue;
/* Return the first thread that cannot be synchronized. */
failed = task_pid_vnr(thread);
/* If the pid cannot be resolved, then return -ESRCH */
if (WARN_ON(failed == 0))
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
failed = -ESRCH;
return failed;
}
return 0;
}
seccomp: release filter after task is fully dead The seccomp filter used to be released in free_task() which is called asynchronously via call_rcu() and assorted mechanisms. Since we need to inform tasks waiting on the seccomp notifier when a filter goes empty we will notify them as soon as a task has been marked fully dead in release_task(). To not split seccomp cleanup into two parts, move filter release out of free_task() and into release_task() after we've unhashed struct task from struct pid, exited signals, and unlinked it from the threadgroups' thread list. We'll put the empty filter notification infrastructure into it in a follow up patch. This also renames put_seccomp_filter() to seccomp_filter_release() which is a more descriptive name of what we're doing here especially once we've added the empty filter notification mechanism in there. We're also NULL-ing the task's filter tree entrypoint which seems cleaner than leaving a dangling pointer in there. Note that this shouldn't need any memory barriers since we're calling this when the task is in release_task() which means it's EXIT_DEAD. So it can't modify its seccomp filters anymore. You can also see this from the point where we're calling seccomp_filter_release(). It's after __exit_signal() and at this point, tsk->sighand will already have been NULLed which is required for thread-sync and filter installation alike. Cc: Tycho Andersen <tycho@tycho.ws> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Denton <mpdenton@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Jann Horn <jannh@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Robert Sesek <rsesek@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Linux Containers <containers@lists.linux-foundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200531115031.391515-2-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31 11:50:29 +00:00
static inline void seccomp_filter_free(struct seccomp_filter *filter)
{
if (filter) {
bpf_prog_destroy(filter->prog);
kfree(filter);
}
}
seccomp: notify about unused filter We've been making heavy use of the seccomp notifier to intercept and handle certain syscalls for containers. This patch allows a syscall supervisor listening on a given notifier to be notified when a seccomp filter has become unused. A container is often managed by a singleton supervisor process the so-called "monitor". This monitor process has an event loop which has various event handlers registered. If the user specified a seccomp profile that included a notifier for various syscalls then we also register a seccomp notify even handler. For any container using a separate pid namespace the lifecycle of the seccomp notifier is bound to the init process of the pid namespace, i.e. when the init process exits the filter must be unused. If a new process attaches to a container we force it to assume a seccomp profile. This can either be the same seccomp profile as the container was started with or a modified one. If the attaching process makes use of the seccomp notifier we will register a new seccomp notifier handler in the monitor's event loop. However, when the attaching process exits we can't simply delete the handler since other child processes could've been created (daemons spawned etc.) that have inherited the seccomp filter and so we need to keep the seccomp notifier fd alive in the event loop. But this is problematic since we don't get a notification when the seccomp filter has become unused and so we currently never remove the seccomp notifier fd from the event loop and just keep accumulating fds in the event loop. We've had this issue for a while but it has recently become more pressing as more and larger users make use of this. To fix this, we introduce a new "users" reference counter that tracks any tasks and dependent filters making use of a filter. When a notifier is registered waiting tasks will be notified that the filter is now empty by receiving a (E)POLLHUP event. The concept in this patch introduces is the same as for signal_struct, i.e. reference counting for life-cycle management is decoupled from reference counting taks using the object. There's probably some trickery possible but the second counter is just the correct way of doing this IMHO and has precedence. Cc: Tycho Andersen <tycho@tycho.ws> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Denton <mpdenton@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Jann Horn <jannh@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Robert Sesek <rsesek@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Linux Containers <containers@lists.linux-foundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200531115031.391515-3-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31 11:50:30 +00:00
static void __seccomp_filter_orphan(struct seccomp_filter *orig)
{
while (orig && refcount_dec_and_test(&orig->users)) {
if (waitqueue_active(&orig->wqh))
wake_up_poll(&orig->wqh, EPOLLHUP);
orig = orig->prev;
}
}
seccomp: release filter after task is fully dead The seccomp filter used to be released in free_task() which is called asynchronously via call_rcu() and assorted mechanisms. Since we need to inform tasks waiting on the seccomp notifier when a filter goes empty we will notify them as soon as a task has been marked fully dead in release_task(). To not split seccomp cleanup into two parts, move filter release out of free_task() and into release_task() after we've unhashed struct task from struct pid, exited signals, and unlinked it from the threadgroups' thread list. We'll put the empty filter notification infrastructure into it in a follow up patch. This also renames put_seccomp_filter() to seccomp_filter_release() which is a more descriptive name of what we're doing here especially once we've added the empty filter notification mechanism in there. We're also NULL-ing the task's filter tree entrypoint which seems cleaner than leaving a dangling pointer in there. Note that this shouldn't need any memory barriers since we're calling this when the task is in release_task() which means it's EXIT_DEAD. So it can't modify its seccomp filters anymore. You can also see this from the point where we're calling seccomp_filter_release(). It's after __exit_signal() and at this point, tsk->sighand will already have been NULLed which is required for thread-sync and filter installation alike. Cc: Tycho Andersen <tycho@tycho.ws> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Denton <mpdenton@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Jann Horn <jannh@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Robert Sesek <rsesek@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Linux Containers <containers@lists.linux-foundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200531115031.391515-2-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31 11:50:29 +00:00
static void __put_seccomp_filter(struct seccomp_filter *orig)
{
/* Clean up single-reference branches iteratively. */
while (orig && refcount_dec_and_test(&orig->refs)) {
struct seccomp_filter *freeme = orig;
orig = orig->prev;
seccomp_filter_free(freeme);
}
}
seccomp: notify about unused filter We've been making heavy use of the seccomp notifier to intercept and handle certain syscalls for containers. This patch allows a syscall supervisor listening on a given notifier to be notified when a seccomp filter has become unused. A container is often managed by a singleton supervisor process the so-called "monitor". This monitor process has an event loop which has various event handlers registered. If the user specified a seccomp profile that included a notifier for various syscalls then we also register a seccomp notify even handler. For any container using a separate pid namespace the lifecycle of the seccomp notifier is bound to the init process of the pid namespace, i.e. when the init process exits the filter must be unused. If a new process attaches to a container we force it to assume a seccomp profile. This can either be the same seccomp profile as the container was started with or a modified one. If the attaching process makes use of the seccomp notifier we will register a new seccomp notifier handler in the monitor's event loop. However, when the attaching process exits we can't simply delete the handler since other child processes could've been created (daemons spawned etc.) that have inherited the seccomp filter and so we need to keep the seccomp notifier fd alive in the event loop. But this is problematic since we don't get a notification when the seccomp filter has become unused and so we currently never remove the seccomp notifier fd from the event loop and just keep accumulating fds in the event loop. We've had this issue for a while but it has recently become more pressing as more and larger users make use of this. To fix this, we introduce a new "users" reference counter that tracks any tasks and dependent filters making use of a filter. When a notifier is registered waiting tasks will be notified that the filter is now empty by receiving a (E)POLLHUP event. The concept in this patch introduces is the same as for signal_struct, i.e. reference counting for life-cycle management is decoupled from reference counting taks using the object. There's probably some trickery possible but the second counter is just the correct way of doing this IMHO and has precedence. Cc: Tycho Andersen <tycho@tycho.ws> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Denton <mpdenton@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Jann Horn <jannh@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Robert Sesek <rsesek@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Linux Containers <containers@lists.linux-foundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200531115031.391515-3-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31 11:50:30 +00:00
static void __seccomp_filter_release(struct seccomp_filter *orig)
{
/* Notify about any unused filters in the task's former filter tree. */
__seccomp_filter_orphan(orig);
/* Finally drop all references to the task's former tree. */
__put_seccomp_filter(orig);
}
seccomp: release filter after task is fully dead The seccomp filter used to be released in free_task() which is called asynchronously via call_rcu() and assorted mechanisms. Since we need to inform tasks waiting on the seccomp notifier when a filter goes empty we will notify them as soon as a task has been marked fully dead in release_task(). To not split seccomp cleanup into two parts, move filter release out of free_task() and into release_task() after we've unhashed struct task from struct pid, exited signals, and unlinked it from the threadgroups' thread list. We'll put the empty filter notification infrastructure into it in a follow up patch. This also renames put_seccomp_filter() to seccomp_filter_release() which is a more descriptive name of what we're doing here especially once we've added the empty filter notification mechanism in there. We're also NULL-ing the task's filter tree entrypoint which seems cleaner than leaving a dangling pointer in there. Note that this shouldn't need any memory barriers since we're calling this when the task is in release_task() which means it's EXIT_DEAD. So it can't modify its seccomp filters anymore. You can also see this from the point where we're calling seccomp_filter_release(). It's after __exit_signal() and at this point, tsk->sighand will already have been NULLed which is required for thread-sync and filter installation alike. Cc: Tycho Andersen <tycho@tycho.ws> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Denton <mpdenton@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Jann Horn <jannh@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Robert Sesek <rsesek@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Linux Containers <containers@lists.linux-foundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200531115031.391515-2-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31 11:50:29 +00:00
/**
seccomp: notify about unused filter We've been making heavy use of the seccomp notifier to intercept and handle certain syscalls for containers. This patch allows a syscall supervisor listening on a given notifier to be notified when a seccomp filter has become unused. A container is often managed by a singleton supervisor process the so-called "monitor". This monitor process has an event loop which has various event handlers registered. If the user specified a seccomp profile that included a notifier for various syscalls then we also register a seccomp notify even handler. For any container using a separate pid namespace the lifecycle of the seccomp notifier is bound to the init process of the pid namespace, i.e. when the init process exits the filter must be unused. If a new process attaches to a container we force it to assume a seccomp profile. This can either be the same seccomp profile as the container was started with or a modified one. If the attaching process makes use of the seccomp notifier we will register a new seccomp notifier handler in the monitor's event loop. However, when the attaching process exits we can't simply delete the handler since other child processes could've been created (daemons spawned etc.) that have inherited the seccomp filter and so we need to keep the seccomp notifier fd alive in the event loop. But this is problematic since we don't get a notification when the seccomp filter has become unused and so we currently never remove the seccomp notifier fd from the event loop and just keep accumulating fds in the event loop. We've had this issue for a while but it has recently become more pressing as more and larger users make use of this. To fix this, we introduce a new "users" reference counter that tracks any tasks and dependent filters making use of a filter. When a notifier is registered waiting tasks will be notified that the filter is now empty by receiving a (E)POLLHUP event. The concept in this patch introduces is the same as for signal_struct, i.e. reference counting for life-cycle management is decoupled from reference counting taks using the object. There's probably some trickery possible but the second counter is just the correct way of doing this IMHO and has precedence. Cc: Tycho Andersen <tycho@tycho.ws> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Denton <mpdenton@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Jann Horn <jannh@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Robert Sesek <rsesek@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Linux Containers <containers@lists.linux-foundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200531115031.391515-3-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31 11:50:30 +00:00
* seccomp_filter_release - Detach the task from its filter tree,
* drop its reference count, and notify
* about unused filters
seccomp: release filter after task is fully dead The seccomp filter used to be released in free_task() which is called asynchronously via call_rcu() and assorted mechanisms. Since we need to inform tasks waiting on the seccomp notifier when a filter goes empty we will notify them as soon as a task has been marked fully dead in release_task(). To not split seccomp cleanup into two parts, move filter release out of free_task() and into release_task() after we've unhashed struct task from struct pid, exited signals, and unlinked it from the threadgroups' thread list. We'll put the empty filter notification infrastructure into it in a follow up patch. This also renames put_seccomp_filter() to seccomp_filter_release() which is a more descriptive name of what we're doing here especially once we've added the empty filter notification mechanism in there. We're also NULL-ing the task's filter tree entrypoint which seems cleaner than leaving a dangling pointer in there. Note that this shouldn't need any memory barriers since we're calling this when the task is in release_task() which means it's EXIT_DEAD. So it can't modify its seccomp filters anymore. You can also see this from the point where we're calling seccomp_filter_release(). It's after __exit_signal() and at this point, tsk->sighand will already have been NULLed which is required for thread-sync and filter installation alike. Cc: Tycho Andersen <tycho@tycho.ws> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Denton <mpdenton@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Jann Horn <jannh@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Robert Sesek <rsesek@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Linux Containers <containers@lists.linux-foundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200531115031.391515-2-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31 11:50:29 +00:00
*
* This function should only be called when the task is exiting as
* it detaches it from its filter tree. As such, READ_ONCE() and
* barriers are not needed here, as would normally be needed.
*/
void seccomp_filter_release(struct task_struct *tsk)
{
struct seccomp_filter *orig = tsk->seccomp.filter;
seccomp/cache: Report cache data through /proc/pid/seccomp_cache Currently the kernel does not provide an infrastructure to translate architecture numbers to a human-readable name. Translating syscall numbers to syscall names is possible through FTRACE_SYSCALL infrastructure but it does not provide support for compat syscalls. This will create a file for each PID as /proc/pid/seccomp_cache. The file will be empty when no seccomp filters are loaded, or be in the format of: <arch name> <decimal syscall number> <ALLOW | FILTER> where ALLOW means the cache is guaranteed to allow the syscall, and filter means the cache will pass the syscall to the BPF filter. For the docker default profile on x86_64 it looks like: x86_64 0 ALLOW x86_64 1 ALLOW x86_64 2 ALLOW x86_64 3 ALLOW [...] x86_64 132 ALLOW x86_64 133 ALLOW x86_64 134 FILTER x86_64 135 FILTER x86_64 136 FILTER x86_64 137 ALLOW x86_64 138 ALLOW x86_64 139 FILTER x86_64 140 ALLOW x86_64 141 ALLOW [...] This file is guarded by CONFIG_SECCOMP_CACHE_DEBUG with a default of N because I think certain users of seccomp might not want the application to know which syscalls are definitely usable. For the same reason, it is also guarded by CAP_SYS_ADMIN. Suggested-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/lkml/CAG48ez3Ofqp4crXGksLmZY6=fGrF_tWyUCg7PBkAetvbbOPeOA@mail.gmail.com/ Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/94e663fa53136f5a11f432c661794d1ee7060779.1605101222.git.yifeifz2@illinois.edu
2020-11-11 13:33:54 +00:00
/* We are effectively holding the siglock by not having any sighand. */
WARN_ON(tsk->sighand != NULL);
seccomp: release filter after task is fully dead The seccomp filter used to be released in free_task() which is called asynchronously via call_rcu() and assorted mechanisms. Since we need to inform tasks waiting on the seccomp notifier when a filter goes empty we will notify them as soon as a task has been marked fully dead in release_task(). To not split seccomp cleanup into two parts, move filter release out of free_task() and into release_task() after we've unhashed struct task from struct pid, exited signals, and unlinked it from the threadgroups' thread list. We'll put the empty filter notification infrastructure into it in a follow up patch. This also renames put_seccomp_filter() to seccomp_filter_release() which is a more descriptive name of what we're doing here especially once we've added the empty filter notification mechanism in there. We're also NULL-ing the task's filter tree entrypoint which seems cleaner than leaving a dangling pointer in there. Note that this shouldn't need any memory barriers since we're calling this when the task is in release_task() which means it's EXIT_DEAD. So it can't modify its seccomp filters anymore. You can also see this from the point where we're calling seccomp_filter_release(). It's after __exit_signal() and at this point, tsk->sighand will already have been NULLed which is required for thread-sync and filter installation alike. Cc: Tycho Andersen <tycho@tycho.ws> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Denton <mpdenton@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Jann Horn <jannh@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Robert Sesek <rsesek@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Linux Containers <containers@lists.linux-foundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200531115031.391515-2-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31 11:50:29 +00:00
/* Detach task from its filter tree. */
tsk->seccomp.filter = NULL;
seccomp: notify about unused filter We've been making heavy use of the seccomp notifier to intercept and handle certain syscalls for containers. This patch allows a syscall supervisor listening on a given notifier to be notified when a seccomp filter has become unused. A container is often managed by a singleton supervisor process the so-called "monitor". This monitor process has an event loop which has various event handlers registered. If the user specified a seccomp profile that included a notifier for various syscalls then we also register a seccomp notify even handler. For any container using a separate pid namespace the lifecycle of the seccomp notifier is bound to the init process of the pid namespace, i.e. when the init process exits the filter must be unused. If a new process attaches to a container we force it to assume a seccomp profile. This can either be the same seccomp profile as the container was started with or a modified one. If the attaching process makes use of the seccomp notifier we will register a new seccomp notifier handler in the monitor's event loop. However, when the attaching process exits we can't simply delete the handler since other child processes could've been created (daemons spawned etc.) that have inherited the seccomp filter and so we need to keep the seccomp notifier fd alive in the event loop. But this is problematic since we don't get a notification when the seccomp filter has become unused and so we currently never remove the seccomp notifier fd from the event loop and just keep accumulating fds in the event loop. We've had this issue for a while but it has recently become more pressing as more and larger users make use of this. To fix this, we introduce a new "users" reference counter that tracks any tasks and dependent filters making use of a filter. When a notifier is registered waiting tasks will be notified that the filter is now empty by receiving a (E)POLLHUP event. The concept in this patch introduces is the same as for signal_struct, i.e. reference counting for life-cycle management is decoupled from reference counting taks using the object. There's probably some trickery possible but the second counter is just the correct way of doing this IMHO and has precedence. Cc: Tycho Andersen <tycho@tycho.ws> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Denton <mpdenton@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Jann Horn <jannh@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Robert Sesek <rsesek@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Linux Containers <containers@lists.linux-foundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200531115031.391515-3-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31 11:50:30 +00:00
__seccomp_filter_release(orig);
seccomp: release filter after task is fully dead The seccomp filter used to be released in free_task() which is called asynchronously via call_rcu() and assorted mechanisms. Since we need to inform tasks waiting on the seccomp notifier when a filter goes empty we will notify them as soon as a task has been marked fully dead in release_task(). To not split seccomp cleanup into two parts, move filter release out of free_task() and into release_task() after we've unhashed struct task from struct pid, exited signals, and unlinked it from the threadgroups' thread list. We'll put the empty filter notification infrastructure into it in a follow up patch. This also renames put_seccomp_filter() to seccomp_filter_release() which is a more descriptive name of what we're doing here especially once we've added the empty filter notification mechanism in there. We're also NULL-ing the task's filter tree entrypoint which seems cleaner than leaving a dangling pointer in there. Note that this shouldn't need any memory barriers since we're calling this when the task is in release_task() which means it's EXIT_DEAD. So it can't modify its seccomp filters anymore. You can also see this from the point where we're calling seccomp_filter_release(). It's after __exit_signal() and at this point, tsk->sighand will already have been NULLed which is required for thread-sync and filter installation alike. Cc: Tycho Andersen <tycho@tycho.ws> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Denton <mpdenton@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Jann Horn <jannh@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Robert Sesek <rsesek@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Linux Containers <containers@lists.linux-foundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200531115031.391515-2-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31 11:50:29 +00:00
}
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
/**
* seccomp_sync_threads: sets all threads to use current's filter
*
* Expects sighand and cred_guard_mutex locks to be held, and for
* seccomp_can_sync_threads() to have returned success already
* without dropping the locks.
*
*/
static inline void seccomp_sync_threads(unsigned long flags)
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
{
struct task_struct *thread, *caller;
BUG_ON(!mutex_is_locked(&current->signal->cred_guard_mutex));
assert_spin_locked(&current->sighand->siglock);
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
/* Synchronize all threads. */
caller = current;
for_each_thread(caller, thread) {
/* Skip current, since it needs no changes. */
if (thread == caller)
continue;
/* Get a task reference for the new leaf node. */
get_seccomp_filter(caller);
seccomp: notify about unused filter We've been making heavy use of the seccomp notifier to intercept and handle certain syscalls for containers. This patch allows a syscall supervisor listening on a given notifier to be notified when a seccomp filter has become unused. A container is often managed by a singleton supervisor process the so-called "monitor". This monitor process has an event loop which has various event handlers registered. If the user specified a seccomp profile that included a notifier for various syscalls then we also register a seccomp notify even handler. For any container using a separate pid namespace the lifecycle of the seccomp notifier is bound to the init process of the pid namespace, i.e. when the init process exits the filter must be unused. If a new process attaches to a container we force it to assume a seccomp profile. This can either be the same seccomp profile as the container was started with or a modified one. If the attaching process makes use of the seccomp notifier we will register a new seccomp notifier handler in the monitor's event loop. However, when the attaching process exits we can't simply delete the handler since other child processes could've been created (daemons spawned etc.) that have inherited the seccomp filter and so we need to keep the seccomp notifier fd alive in the event loop. But this is problematic since we don't get a notification when the seccomp filter has become unused and so we currently never remove the seccomp notifier fd from the event loop and just keep accumulating fds in the event loop. We've had this issue for a while but it has recently become more pressing as more and larger users make use of this. To fix this, we introduce a new "users" reference counter that tracks any tasks and dependent filters making use of a filter. When a notifier is registered waiting tasks will be notified that the filter is now empty by receiving a (E)POLLHUP event. The concept in this patch introduces is the same as for signal_struct, i.e. reference counting for life-cycle management is decoupled from reference counting taks using the object. There's probably some trickery possible but the second counter is just the correct way of doing this IMHO and has precedence. Cc: Tycho Andersen <tycho@tycho.ws> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Denton <mpdenton@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Jann Horn <jannh@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Robert Sesek <rsesek@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Linux Containers <containers@lists.linux-foundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200531115031.391515-3-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31 11:50:30 +00:00
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
/*
* Drop the task reference to the shared ancestor since
* current's path will hold a reference. (This also
* allows a put before the assignment.)
*/
seccomp: notify about unused filter We've been making heavy use of the seccomp notifier to intercept and handle certain syscalls for containers. This patch allows a syscall supervisor listening on a given notifier to be notified when a seccomp filter has become unused. A container is often managed by a singleton supervisor process the so-called "monitor". This monitor process has an event loop which has various event handlers registered. If the user specified a seccomp profile that included a notifier for various syscalls then we also register a seccomp notify even handler. For any container using a separate pid namespace the lifecycle of the seccomp notifier is bound to the init process of the pid namespace, i.e. when the init process exits the filter must be unused. If a new process attaches to a container we force it to assume a seccomp profile. This can either be the same seccomp profile as the container was started with or a modified one. If the attaching process makes use of the seccomp notifier we will register a new seccomp notifier handler in the monitor's event loop. However, when the attaching process exits we can't simply delete the handler since other child processes could've been created (daemons spawned etc.) that have inherited the seccomp filter and so we need to keep the seccomp notifier fd alive in the event loop. But this is problematic since we don't get a notification when the seccomp filter has become unused and so we currently never remove the seccomp notifier fd from the event loop and just keep accumulating fds in the event loop. We've had this issue for a while but it has recently become more pressing as more and larger users make use of this. To fix this, we introduce a new "users" reference counter that tracks any tasks and dependent filters making use of a filter. When a notifier is registered waiting tasks will be notified that the filter is now empty by receiving a (E)POLLHUP event. The concept in this patch introduces is the same as for signal_struct, i.e. reference counting for life-cycle management is decoupled from reference counting taks using the object. There's probably some trickery possible but the second counter is just the correct way of doing this IMHO and has precedence. Cc: Tycho Andersen <tycho@tycho.ws> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Denton <mpdenton@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Jann Horn <jannh@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Robert Sesek <rsesek@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Linux Containers <containers@lists.linux-foundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200531115031.391515-3-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31 11:50:30 +00:00
__seccomp_filter_release(thread->seccomp.filter);
/* Make our new filter tree visible. */
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
smp_store_release(&thread->seccomp.filter,
caller->seccomp.filter);
atomic_set(&thread->seccomp.filter_count,
atomic_read(&caller->seccomp.filter_count));
/*
* Don't let an unprivileged task work around
* the no_new_privs restriction by creating
* a thread that sets it up, enters seccomp,
* then dies.
*/
if (task_no_new_privs(caller))
task_set_no_new_privs(thread);
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
/*
* Opt the other thread into seccomp if needed.
* As threads are considered to be trust-realm
* equivalent (see ptrace_may_access), it is safe to
* allow one thread to transition the other.
*/
if (thread->seccomp.mode == SECCOMP_MODE_DISABLED)
seccomp_assign_mode(thread, SECCOMP_MODE_FILTER,
flags);
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
}
}
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
/**
* seccomp_prepare_filter: Prepares a seccomp filter for use.
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
* @fprog: BPF program to install
*
* Returns filter on success or an ERR_PTR on failure.
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
*/
static struct seccomp_filter *seccomp_prepare_filter(struct sock_fprog *fprog)
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
{
struct seccomp_filter *sfilter;
int ret;
seccomp/cache: Add "emulator" to check if filter is constant allow SECCOMP_CACHE will only operate on syscalls that do not access any syscall arguments or instruction pointer. To facilitate this we need a static analyser to know whether a filter will return allow regardless of syscall arguments for a given architecture number / syscall number pair. This is implemented here with a pseudo-emulator, and stored in a per-filter bitmap. In order to build this bitmap at filter attach time, each filter is emulated for every syscall (under each possible architecture), and checked for any accesses of struct seccomp_data that are not the "arch" nor "nr" (syscall) members. If only "arch" and "nr" are examined, and the program returns allow, then we can be sure that the filter must return allow independent from syscall arguments. Nearly all seccomp filters are built from these cBPF instructions: BPF_LD | BPF_W | BPF_ABS BPF_JMP | BPF_JEQ | BPF_K BPF_JMP | BPF_JGE | BPF_K BPF_JMP | BPF_JGT | BPF_K BPF_JMP | BPF_JSET | BPF_K BPF_JMP | BPF_JA BPF_RET | BPF_K BPF_ALU | BPF_AND | BPF_K Each of these instructions are emulated. Any weirdness or loading from a syscall argument will cause the emulator to bail. The emulation is also halted if it reaches a return. In that case, if it returns an SECCOMP_RET_ALLOW, the syscall is marked as good. Emulator structure and comments are from Kees [1] and Jann [2]. Emulation is done at attach time. If a filter depends on more filters, and if the dependee does not guarantee to allow the syscall, then we skip the emulation of this syscall. [1] https://lore.kernel.org/lkml/20200923232923.3142503-5-keescook@chromium.org/ [2] https://lore.kernel.org/lkml/CAG48ez1p=dR_2ikKq=xVxkoGg0fYpTBpkhJSv1w-6BG=76PAvw@mail.gmail.com/ Suggested-by: Jann Horn <jannh@google.com> Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu> Reviewed-by: Jann Horn <jannh@google.com> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/71c7be2db5ee08905f41c3be5c1ad6e2601ce88f.1602431034.git.yifeifz2@illinois.edu
2020-10-11 15:47:43 +00:00
const bool save_orig =
#if defined(CONFIG_CHECKPOINT_RESTORE) || defined(SECCOMP_ARCH_NATIVE)
true;
#else
false;
#endif
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
if (fprog->len == 0 || fprog->len > BPF_MAXINSNS)
return ERR_PTR(-EINVAL);
BUG_ON(INT_MAX / fprog->len < sizeof(struct sock_filter));
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
/*
* Installing a seccomp filter requires that the task has
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
* CAP_SYS_ADMIN in its namespace or be running with no_new_privs.
* This avoids scenarios where unprivileged tasks can affect the
* behavior of privileged children.
*/
if (!task_no_new_privs(current) &&
!ns_capable_noaudit(current_user_ns(), CAP_SYS_ADMIN))
return ERR_PTR(-EACCES);
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
net: filter: rework/optimize internal BPF interpreter's instruction set This patch replaces/reworks the kernel-internal BPF interpreter with an optimized BPF instruction set format that is modelled closer to mimic native instruction sets and is designed to be JITed with one to one mapping. Thus, the new interpreter is noticeably faster than the current implementation of sk_run_filter(); mainly for two reasons: 1. Fall-through jumps: BPF jump instructions are forced to go either 'true' or 'false' branch which causes branch-miss penalty. The new BPF jump instructions have only one branch and fall-through otherwise, which fits the CPU branch predictor logic better. `perf stat` shows drastic difference for branch-misses between the old and new code. 2. Jump-threaded implementation of interpreter vs switch statement: Instead of single table-jump at the top of 'switch' statement, gcc will now generate multiple table-jump instructions, which helps CPU branch predictor logic. Note that the verification of filters is still being done through sk_chk_filter() in classical BPF format, so filters from user- or kernel space are verified in the same way as we do now, and same restrictions/constraints hold as well. We reuse current BPF JIT compilers in a way that this upgrade would even be fine as is, but nevertheless allows for a successive upgrade of BPF JIT compilers to the new format. The internal instruction set migration is being done after the probing for JIT compilation, so in case JIT compilers are able to create a native opcode image, we're going to use that, and in all other cases we're doing a follow-up migration of the BPF program's instruction set, so that it can be transparently run in the new interpreter. In short, the *internal* format extends BPF in the following way (more details can be taken from the appended documentation): - Number of registers increase from 2 to 10 - Register width increases from 32-bit to 64-bit - Conditional jt/jf targets replaced with jt/fall-through - Adds signed > and >= insns - 16 4-byte stack slots for register spill-fill replaced with up to 512 bytes of multi-use stack space - Introduction of bpf_call insn and register passing convention for zero overhead calls from/to other kernel functions - Adds arithmetic right shift and endianness conversion insns - Adds atomic_add insn - Old tax/txa insns are replaced with 'mov dst,src' insn Performance of two BPF filters generated by libpcap resp. bpf_asm was measured on x86_64, i386 and arm32 (other libpcap programs have similar performance differences): fprog #1 is taken from Documentation/networking/filter.txt: tcpdump -i eth0 port 22 -dd fprog #2 is taken from 'man tcpdump': tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)' -dd Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call, smaller is better: --x86_64-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 90 101 192 202 new BPF 31 71 47 97 old BPF jit 12 34 17 44 new BPF jit TBD --i386-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 107 136 227 252 new BPF 40 119 69 172 --arm32-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 202 300 475 540 new BPF 180 270 330 470 old BPF jit 26 182 37 202 new BPF jit TBD Thus, without changing any userland BPF filters, applications on top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf classifier, netfilter's xt_bpf, team driver's load-balancing mode, and many more will have better interpreter filtering performance. While we are replacing the internal BPF interpreter, we also need to convert seccomp BPF in the same step to make use of the new internal structure since it makes use of lower-level API details without being further decoupled through higher-level calls like sk_unattached_filter_{create,destroy}(), for example. Just as for normal socket filtering, also seccomp BPF experiences a time-to-verdict speedup: 05-sim-long_jumps.c of libseccomp was used as micro-benchmark: seccomp_rule_add_exact(ctx,... seccomp_rule_add_exact(ctx,... rc = seccomp_load(ctx); for (i = 0; i < 10000000; i++) syscall(199, 100); 'short filter' has 2 rules 'large filter' has 200 rules 'short filter' performance is slightly better on x86_64/i386/arm32 'large filter' is much faster on x86_64 and i386 and shows no difference on arm32 --x86_64-- short filter old BPF: 2.7 sec 39.12% bench libc-2.15.so [.] syscall 8.10% bench [kernel.kallsyms] [k] sk_run_filter 6.31% bench [kernel.kallsyms] [k] system_call 5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller 3.70% bench [kernel.kallsyms] [k] __secure_computing 3.67% bench [kernel.kallsyms] [k] lock_is_held 3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load new BPF: 2.58 sec 42.05% bench libc-2.15.so [.] syscall 6.91% bench [kernel.kallsyms] [k] system_call 6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 6.07% bench [kernel.kallsyms] [k] __secure_computing 5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp --arm32-- short filter old BPF: 4.0 sec 39.92% bench [kernel.kallsyms] [k] vector_swi 16.60% bench [kernel.kallsyms] [k] sk_run_filter 14.66% bench libc-2.17.so [.] syscall 5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load 5.10% bench [kernel.kallsyms] [k] __secure_computing new BPF: 3.7 sec 35.93% bench [kernel.kallsyms] [k] vector_swi 21.89% bench libc-2.17.so [.] syscall 13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 6.25% bench [kernel.kallsyms] [k] __secure_computing 3.96% bench [kernel.kallsyms] [k] syscall_trace_exit --x86_64-- large filter old BPF: 8.6 seconds 73.38% bench [kernel.kallsyms] [k] sk_run_filter 10.70% bench libc-2.15.so [.] syscall 5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.97% bench [kernel.kallsyms] [k] system_call new BPF: 5.7 seconds 66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 16.75% bench libc-2.15.so [.] syscall 3.31% bench [kernel.kallsyms] [k] system_call 2.88% bench [kernel.kallsyms] [k] __secure_computing --i386-- large filter old BPF: 5.4 sec new BPF: 3.8 sec --arm32-- large filter old BPF: 13.5 sec 73.88% bench [kernel.kallsyms] [k] sk_run_filter 10.29% bench [kernel.kallsyms] [k] vector_swi 6.46% bench libc-2.17.so [.] syscall 2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.19% bench [kernel.kallsyms] [k] __secure_computing 0.87% bench [kernel.kallsyms] [k] sys_getuid new BPF: 13.5 sec 76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 10.98% bench [kernel.kallsyms] [k] vector_swi 5.87% bench libc-2.17.so [.] syscall 1.77% bench [kernel.kallsyms] [k] __secure_computing 0.93% bench [kernel.kallsyms] [k] sys_getuid BPF filters generated by seccomp are very branchy, so the new internal BPF performance is better than the old one. Performance gains will be even higher when BPF JIT is committed for the new structure, which is planned in future work (as successive JIT migrations). BPF has also been stress-tested with trinity's BPF fuzzer. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Kees Cook <keescook@chromium.org> Cc: Paul Moore <pmoore@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: linux-kernel@vger.kernel.org Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
/* Allocate a new seccomp_filter */
sfilter = kzalloc(sizeof(*sfilter), GFP_KERNEL | __GFP_NOWARN);
if (!sfilter)
return ERR_PTR(-ENOMEM);
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
mutex_init(&sfilter->notify_lock);
ret = bpf_prog_create_from_user(&sfilter->prog, fprog,
seccomp, ptrace: add support for dumping seccomp filters This patch adds support for dumping a process' (classic BPF) seccomp filters via ptrace. PTRACE_SECCOMP_GET_FILTER allows the tracer to dump the user's classic BPF seccomp filters. addr should be an integer which represents the ith seccomp filter (0 is the most recently installed filter). data should be a struct sock_filter * with enough room for the ith filter, or NULL, in which case the filter is not saved. The return value for this command is the number of BPF instructions the program represents, or negative in the case of errors. Command specific errors are ENOENT: which indicates that there is no ith filter in this seccomp tree, and EMEDIUMTYPE, which indicates that the ith filter was not installed as a classic BPF filter. A caveat with this approach is that there is no way to get explicitly at the heirarchy of seccomp filters, and users need to memcmp() filters to decide which are inherited. This means that a task which installs two of the same filter can potentially confuse users of this interface. v2: * make save_orig const * check that the orig_prog exists (not necessary right now, but when grows eBPF support it will be) * s/n/filter_off and make it an unsigned long to match ptrace * count "down" the tree instead of "up" when passing a filter offset v3: * don't take the current task's lock for inspecting its seccomp mode * use a 0x42** constant for the ptrace command value v4: * don't copy to userspace while holding spinlocks v5: * add another condition to WARN_ON v6: * rebase on net-next Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> CC: Will Drewry <wad@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> CC: Alexei Starovoitov <ast@kernel.org> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 00:23:59 +00:00
seccomp_check_filter, save_orig);
if (ret < 0) {
kfree(sfilter);
return ERR_PTR(ret);
}
net: filter: rework/optimize internal BPF interpreter's instruction set This patch replaces/reworks the kernel-internal BPF interpreter with an optimized BPF instruction set format that is modelled closer to mimic native instruction sets and is designed to be JITed with one to one mapping. Thus, the new interpreter is noticeably faster than the current implementation of sk_run_filter(); mainly for two reasons: 1. Fall-through jumps: BPF jump instructions are forced to go either 'true' or 'false' branch which causes branch-miss penalty. The new BPF jump instructions have only one branch and fall-through otherwise, which fits the CPU branch predictor logic better. `perf stat` shows drastic difference for branch-misses between the old and new code. 2. Jump-threaded implementation of interpreter vs switch statement: Instead of single table-jump at the top of 'switch' statement, gcc will now generate multiple table-jump instructions, which helps CPU branch predictor logic. Note that the verification of filters is still being done through sk_chk_filter() in classical BPF format, so filters from user- or kernel space are verified in the same way as we do now, and same restrictions/constraints hold as well. We reuse current BPF JIT compilers in a way that this upgrade would even be fine as is, but nevertheless allows for a successive upgrade of BPF JIT compilers to the new format. The internal instruction set migration is being done after the probing for JIT compilation, so in case JIT compilers are able to create a native opcode image, we're going to use that, and in all other cases we're doing a follow-up migration of the BPF program's instruction set, so that it can be transparently run in the new interpreter. In short, the *internal* format extends BPF in the following way (more details can be taken from the appended documentation): - Number of registers increase from 2 to 10 - Register width increases from 32-bit to 64-bit - Conditional jt/jf targets replaced with jt/fall-through - Adds signed > and >= insns - 16 4-byte stack slots for register spill-fill replaced with up to 512 bytes of multi-use stack space - Introduction of bpf_call insn and register passing convention for zero overhead calls from/to other kernel functions - Adds arithmetic right shift and endianness conversion insns - Adds atomic_add insn - Old tax/txa insns are replaced with 'mov dst,src' insn Performance of two BPF filters generated by libpcap resp. bpf_asm was measured on x86_64, i386 and arm32 (other libpcap programs have similar performance differences): fprog #1 is taken from Documentation/networking/filter.txt: tcpdump -i eth0 port 22 -dd fprog #2 is taken from 'man tcpdump': tcpdump -i eth0 'tcp port 22 and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)' -dd Raw performance data from BPF micro-benchmark: SK_RUN_FILTER on the same SKB (cache-hit) or 10k SKBs (cache-miss); time in ns per call, smaller is better: --x86_64-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 90 101 192 202 new BPF 31 71 47 97 old BPF jit 12 34 17 44 new BPF jit TBD --i386-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 107 136 227 252 new BPF 40 119 69 172 --arm32-- fprog #1 fprog #1 fprog #2 fprog #2 cache-hit cache-miss cache-hit cache-miss old BPF 202 300 475 540 new BPF 180 270 330 470 old BPF jit 26 182 37 202 new BPF jit TBD Thus, without changing any userland BPF filters, applications on top of AF_PACKET (or other families) such as libpcap/tcpdump, cls_bpf classifier, netfilter's xt_bpf, team driver's load-balancing mode, and many more will have better interpreter filtering performance. While we are replacing the internal BPF interpreter, we also need to convert seccomp BPF in the same step to make use of the new internal structure since it makes use of lower-level API details without being further decoupled through higher-level calls like sk_unattached_filter_{create,destroy}(), for example. Just as for normal socket filtering, also seccomp BPF experiences a time-to-verdict speedup: 05-sim-long_jumps.c of libseccomp was used as micro-benchmark: seccomp_rule_add_exact(ctx,... seccomp_rule_add_exact(ctx,... rc = seccomp_load(ctx); for (i = 0; i < 10000000; i++) syscall(199, 100); 'short filter' has 2 rules 'large filter' has 200 rules 'short filter' performance is slightly better on x86_64/i386/arm32 'large filter' is much faster on x86_64 and i386 and shows no difference on arm32 --x86_64-- short filter old BPF: 2.7 sec 39.12% bench libc-2.15.so [.] syscall 8.10% bench [kernel.kallsyms] [k] sk_run_filter 6.31% bench [kernel.kallsyms] [k] system_call 5.59% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 4.37% bench [kernel.kallsyms] [k] trace_hardirqs_off_caller 3.70% bench [kernel.kallsyms] [k] __secure_computing 3.67% bench [kernel.kallsyms] [k] lock_is_held 3.03% bench [kernel.kallsyms] [k] seccomp_bpf_load new BPF: 2.58 sec 42.05% bench libc-2.15.so [.] syscall 6.91% bench [kernel.kallsyms] [k] system_call 6.25% bench [kernel.kallsyms] [k] trace_hardirqs_on_caller 6.07% bench [kernel.kallsyms] [k] __secure_computing 5.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp --arm32-- short filter old BPF: 4.0 sec 39.92% bench [kernel.kallsyms] [k] vector_swi 16.60% bench [kernel.kallsyms] [k] sk_run_filter 14.66% bench libc-2.17.so [.] syscall 5.42% bench [kernel.kallsyms] [k] seccomp_bpf_load 5.10% bench [kernel.kallsyms] [k] __secure_computing new BPF: 3.7 sec 35.93% bench [kernel.kallsyms] [k] vector_swi 21.89% bench libc-2.17.so [.] syscall 13.45% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 6.25% bench [kernel.kallsyms] [k] __secure_computing 3.96% bench [kernel.kallsyms] [k] syscall_trace_exit --x86_64-- large filter old BPF: 8.6 seconds 73.38% bench [kernel.kallsyms] [k] sk_run_filter 10.70% bench libc-2.15.so [.] syscall 5.09% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.97% bench [kernel.kallsyms] [k] system_call new BPF: 5.7 seconds 66.20% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 16.75% bench libc-2.15.so [.] syscall 3.31% bench [kernel.kallsyms] [k] system_call 2.88% bench [kernel.kallsyms] [k] __secure_computing --i386-- large filter old BPF: 5.4 sec new BPF: 3.8 sec --arm32-- large filter old BPF: 13.5 sec 73.88% bench [kernel.kallsyms] [k] sk_run_filter 10.29% bench [kernel.kallsyms] [k] vector_swi 6.46% bench libc-2.17.so [.] syscall 2.94% bench [kernel.kallsyms] [k] seccomp_bpf_load 1.19% bench [kernel.kallsyms] [k] __secure_computing 0.87% bench [kernel.kallsyms] [k] sys_getuid new BPF: 13.5 sec 76.08% bench [kernel.kallsyms] [k] sk_run_filter_int_seccomp 10.98% bench [kernel.kallsyms] [k] vector_swi 5.87% bench libc-2.17.so [.] syscall 1.77% bench [kernel.kallsyms] [k] __secure_computing 0.93% bench [kernel.kallsyms] [k] sys_getuid BPF filters generated by seccomp are very branchy, so the new internal BPF performance is better than the old one. Performance gains will be even higher when BPF JIT is committed for the new structure, which is planned in future work (as successive JIT migrations). BPF has also been stress-tested with trinity's BPF fuzzer. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Kees Cook <keescook@chromium.org> Cc: Paul Moore <pmoore@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: linux-kernel@vger.kernel.org Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 17:58:25 +00:00
refcount_set(&sfilter->refs, 1);
seccomp: notify about unused filter We've been making heavy use of the seccomp notifier to intercept and handle certain syscalls for containers. This patch allows a syscall supervisor listening on a given notifier to be notified when a seccomp filter has become unused. A container is often managed by a singleton supervisor process the so-called "monitor". This monitor process has an event loop which has various event handlers registered. If the user specified a seccomp profile that included a notifier for various syscalls then we also register a seccomp notify even handler. For any container using a separate pid namespace the lifecycle of the seccomp notifier is bound to the init process of the pid namespace, i.e. when the init process exits the filter must be unused. If a new process attaches to a container we force it to assume a seccomp profile. This can either be the same seccomp profile as the container was started with or a modified one. If the attaching process makes use of the seccomp notifier we will register a new seccomp notifier handler in the monitor's event loop. However, when the attaching process exits we can't simply delete the handler since other child processes could've been created (daemons spawned etc.) that have inherited the seccomp filter and so we need to keep the seccomp notifier fd alive in the event loop. But this is problematic since we don't get a notification when the seccomp filter has become unused and so we currently never remove the seccomp notifier fd from the event loop and just keep accumulating fds in the event loop. We've had this issue for a while but it has recently become more pressing as more and larger users make use of this. To fix this, we introduce a new "users" reference counter that tracks any tasks and dependent filters making use of a filter. When a notifier is registered waiting tasks will be notified that the filter is now empty by receiving a (E)POLLHUP event. The concept in this patch introduces is the same as for signal_struct, i.e. reference counting for life-cycle management is decoupled from reference counting taks using the object. There's probably some trickery possible but the second counter is just the correct way of doing this IMHO and has precedence. Cc: Tycho Andersen <tycho@tycho.ws> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Denton <mpdenton@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Jann Horn <jannh@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Robert Sesek <rsesek@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Linux Containers <containers@lists.linux-foundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200531115031.391515-3-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31 11:50:30 +00:00
refcount_set(&sfilter->users, 1);
init_waitqueue_head(&sfilter->wqh);
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
return sfilter;
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
}
/**
* seccomp_prepare_user_filter - prepares a user-supplied sock_fprog
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
* @user_filter: pointer to the user data containing a sock_fprog.
*
* Returns 0 on success and non-zero otherwise.
*/
static struct seccomp_filter *
seccomp_prepare_user_filter(const char __user *user_filter)
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
{
struct sock_fprog fprog;
struct seccomp_filter *filter = ERR_PTR(-EFAULT);
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
#ifdef CONFIG_COMPAT
if (in_compat_syscall()) {
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
struct compat_sock_fprog fprog32;
if (copy_from_user(&fprog32, user_filter, sizeof(fprog32)))
goto out;
fprog.len = fprog32.len;
fprog.filter = compat_ptr(fprog32.filter);
} else /* falls through to the if below. */
#endif
if (copy_from_user(&fprog, user_filter, sizeof(fprog)))
goto out;
filter = seccomp_prepare_filter(&fprog);
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
out:
return filter;
}
seccomp/cache: Add "emulator" to check if filter is constant allow SECCOMP_CACHE will only operate on syscalls that do not access any syscall arguments or instruction pointer. To facilitate this we need a static analyser to know whether a filter will return allow regardless of syscall arguments for a given architecture number / syscall number pair. This is implemented here with a pseudo-emulator, and stored in a per-filter bitmap. In order to build this bitmap at filter attach time, each filter is emulated for every syscall (under each possible architecture), and checked for any accesses of struct seccomp_data that are not the "arch" nor "nr" (syscall) members. If only "arch" and "nr" are examined, and the program returns allow, then we can be sure that the filter must return allow independent from syscall arguments. Nearly all seccomp filters are built from these cBPF instructions: BPF_LD | BPF_W | BPF_ABS BPF_JMP | BPF_JEQ | BPF_K BPF_JMP | BPF_JGE | BPF_K BPF_JMP | BPF_JGT | BPF_K BPF_JMP | BPF_JSET | BPF_K BPF_JMP | BPF_JA BPF_RET | BPF_K BPF_ALU | BPF_AND | BPF_K Each of these instructions are emulated. Any weirdness or loading from a syscall argument will cause the emulator to bail. The emulation is also halted if it reaches a return. In that case, if it returns an SECCOMP_RET_ALLOW, the syscall is marked as good. Emulator structure and comments are from Kees [1] and Jann [2]. Emulation is done at attach time. If a filter depends on more filters, and if the dependee does not guarantee to allow the syscall, then we skip the emulation of this syscall. [1] https://lore.kernel.org/lkml/20200923232923.3142503-5-keescook@chromium.org/ [2] https://lore.kernel.org/lkml/CAG48ez1p=dR_2ikKq=xVxkoGg0fYpTBpkhJSv1w-6BG=76PAvw@mail.gmail.com/ Suggested-by: Jann Horn <jannh@google.com> Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu> Reviewed-by: Jann Horn <jannh@google.com> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/71c7be2db5ee08905f41c3be5c1ad6e2601ce88f.1602431034.git.yifeifz2@illinois.edu
2020-10-11 15:47:43 +00:00
#ifdef SECCOMP_ARCH_NATIVE
/**
* seccomp_is_const_allow - check if filter is constant allow with given data
* @fprog: The BPF programs
* @sd: The seccomp data to check against, only syscall number and arch
* number are considered constant.
*/
static bool seccomp_is_const_allow(struct sock_fprog_kern *fprog,
struct seccomp_data *sd)
{
unsigned int reg_value = 0;
unsigned int pc;
bool op_res;
if (WARN_ON_ONCE(!fprog))
return false;
for (pc = 0; pc < fprog->len; pc++) {
struct sock_filter *insn = &fprog->filter[pc];
u16 code = insn->code;
u32 k = insn->k;
switch (code) {
case BPF_LD | BPF_W | BPF_ABS:
switch (k) {
case offsetof(struct seccomp_data, nr):
reg_value = sd->nr;
break;
case offsetof(struct seccomp_data, arch):
reg_value = sd->arch;
break;
default:
/* can't optimize (non-constant value load) */
return false;
}
break;
case BPF_RET | BPF_K:
/* reached return with constant values only, check allow */
return k == SECCOMP_RET_ALLOW;
case BPF_JMP | BPF_JA:
pc += insn->k;
break;
case BPF_JMP | BPF_JEQ | BPF_K:
case BPF_JMP | BPF_JGE | BPF_K:
case BPF_JMP | BPF_JGT | BPF_K:
case BPF_JMP | BPF_JSET | BPF_K:
switch (BPF_OP(code)) {
case BPF_JEQ:
op_res = reg_value == k;
break;
case BPF_JGE:
op_res = reg_value >= k;
break;
case BPF_JGT:
op_res = reg_value > k;
break;
case BPF_JSET:
op_res = !!(reg_value & k);
break;
default:
/* can't optimize (unknown jump) */
return false;
}
pc += op_res ? insn->jt : insn->jf;
break;
case BPF_ALU | BPF_AND | BPF_K:
reg_value &= k;
break;
default:
/* can't optimize (unknown insn) */
return false;
}
}
/* ran off the end of the filter?! */
WARN_ON(1);
return false;
}
static void seccomp_cache_prepare_bitmap(struct seccomp_filter *sfilter,
void *bitmap, const void *bitmap_prev,
size_t bitmap_size, int arch)
{
struct sock_fprog_kern *fprog = sfilter->prog->orig_prog;
struct seccomp_data sd;
int nr;
if (bitmap_prev) {
/* The new filter must be as restrictive as the last. */
bitmap_copy(bitmap, bitmap_prev, bitmap_size);
} else {
/* Before any filters, all syscalls are always allowed. */
bitmap_fill(bitmap, bitmap_size);
}
for (nr = 0; nr < bitmap_size; nr++) {
/* No bitmap change: not a cacheable action. */
if (!test_bit(nr, bitmap))
continue;
sd.nr = nr;
sd.arch = arch;
/* No bitmap change: continue to always allow. */
if (seccomp_is_const_allow(fprog, &sd))
continue;
/*
* Not a cacheable action: always run filters.
* atomic clear_bit() not needed, filter not visible yet.
*/
__clear_bit(nr, bitmap);
}
}
/**
* seccomp_cache_prepare - emulate the filter to find cacheable syscalls
seccomp/cache: Add "emulator" to check if filter is constant allow SECCOMP_CACHE will only operate on syscalls that do not access any syscall arguments or instruction pointer. To facilitate this we need a static analyser to know whether a filter will return allow regardless of syscall arguments for a given architecture number / syscall number pair. This is implemented here with a pseudo-emulator, and stored in a per-filter bitmap. In order to build this bitmap at filter attach time, each filter is emulated for every syscall (under each possible architecture), and checked for any accesses of struct seccomp_data that are not the "arch" nor "nr" (syscall) members. If only "arch" and "nr" are examined, and the program returns allow, then we can be sure that the filter must return allow independent from syscall arguments. Nearly all seccomp filters are built from these cBPF instructions: BPF_LD | BPF_W | BPF_ABS BPF_JMP | BPF_JEQ | BPF_K BPF_JMP | BPF_JGE | BPF_K BPF_JMP | BPF_JGT | BPF_K BPF_JMP | BPF_JSET | BPF_K BPF_JMP | BPF_JA BPF_RET | BPF_K BPF_ALU | BPF_AND | BPF_K Each of these instructions are emulated. Any weirdness or loading from a syscall argument will cause the emulator to bail. The emulation is also halted if it reaches a return. In that case, if it returns an SECCOMP_RET_ALLOW, the syscall is marked as good. Emulator structure and comments are from Kees [1] and Jann [2]. Emulation is done at attach time. If a filter depends on more filters, and if the dependee does not guarantee to allow the syscall, then we skip the emulation of this syscall. [1] https://lore.kernel.org/lkml/20200923232923.3142503-5-keescook@chromium.org/ [2] https://lore.kernel.org/lkml/CAG48ez1p=dR_2ikKq=xVxkoGg0fYpTBpkhJSv1w-6BG=76PAvw@mail.gmail.com/ Suggested-by: Jann Horn <jannh@google.com> Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu> Reviewed-by: Jann Horn <jannh@google.com> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/71c7be2db5ee08905f41c3be5c1ad6e2601ce88f.1602431034.git.yifeifz2@illinois.edu
2020-10-11 15:47:43 +00:00
* @sfilter: The seccomp filter
*
* Returns 0 if successful or -errno if error occurred.
*/
static void seccomp_cache_prepare(struct seccomp_filter *sfilter)
{
struct action_cache *cache = &sfilter->cache;
const struct action_cache *cache_prev =
sfilter->prev ? &sfilter->prev->cache : NULL;
seccomp_cache_prepare_bitmap(sfilter, cache->allow_native,
cache_prev ? cache_prev->allow_native : NULL,
SECCOMP_ARCH_NATIVE_NR,
SECCOMP_ARCH_NATIVE);
#ifdef SECCOMP_ARCH_COMPAT
seccomp_cache_prepare_bitmap(sfilter, cache->allow_compat,
cache_prev ? cache_prev->allow_compat : NULL,
SECCOMP_ARCH_COMPAT_NR,
SECCOMP_ARCH_COMPAT);
#endif /* SECCOMP_ARCH_COMPAT */
}
#endif /* SECCOMP_ARCH_NATIVE */
/**
* seccomp_attach_filter: validate and attach filter
* @flags: flags to change filter behavior
* @filter: seccomp filter to add to the current process
*
* Caller must be holding current->sighand->siglock lock.
*
seccomp: Make NEW_LISTENER and TSYNC flags exclusive As the comment notes, the return codes for TSYNC and NEW_LISTENER conflict, because they both return positive values, one in the case of success and one in the case of error. So, let's disallow both of these flags together. While this is technically a userspace break, all the users I know of are still waiting on me to land this feature in libseccomp, so I think it'll be safe. Also, at present my use case doesn't require TSYNC at all, so this isn't a big deal to disallow. If someone wanted to support this, a path forward would be to add a new flag like TSYNC_AND_LISTENER_YES_I_UNDERSTAND_THAT_TSYNC_WILL_JUST_RETURN_EAGAIN, but the use cases are so different I don't see it really happening. Finally, it's worth noting that this does actually fix a UAF issue: at the end of seccomp_set_mode_filter(), we have: if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) { if (ret < 0) { listener_f->private_data = NULL; fput(listener_f); put_unused_fd(listener); } else { fd_install(listener, listener_f); ret = listener; } } out_free: seccomp_filter_free(prepared); But if ret > 0 because TSYNC raced, we'll install the listener fd and then free the filter out from underneath it, causing a UAF when the task closes it or dies. This patch also switches the condition to be simply if (ret), so that if someone does add the flag mentioned above, they won't have to remember to fix this too. Reported-by: syzbot+b562969adb2e04af3442@syzkaller.appspotmail.com Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") CC: stable@vger.kernel.org # v5.0+ Signed-off-by: Tycho Andersen <tycho@tycho.ws> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: James Morris <jamorris@linux.microsoft.com>
2019-03-06 20:14:13 +00:00
* Returns 0 on success, -ve on error, or
* - in TSYNC mode: the pid of a thread which was either not in the correct
* seccomp mode or did not have an ancestral seccomp filter
* - in NEW_LISTENER mode: the fd of the new listener
*/
static long seccomp_attach_filter(unsigned int flags,
struct seccomp_filter *filter)
{
unsigned long total_insns;
struct seccomp_filter *walker;
assert_spin_locked(&current->sighand->siglock);
/* Validate resulting filter length. */
total_insns = filter->prog->len;
for (walker = current->seccomp.filter; walker; walker = walker->prev)
total_insns += walker->prog->len + 4; /* 4 instr penalty */
if (total_insns > MAX_INSNS_PER_PATH)
return -ENOMEM;
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
/* If thread sync has been requested, check that it is possible. */
if (flags & SECCOMP_FILTER_FLAG_TSYNC) {
int ret;
ret = seccomp_can_sync_threads();
if (ret) {
if (flags & SECCOMP_FILTER_FLAG_TSYNC_ESRCH)
return -ESRCH;
else
return ret;
}
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
}
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for all actions except for SECCOMP_RET_ALLOW for the given filter. SECCOMP_RET_KILL actions are always logged, when "kill" is in the actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged, regardless of this flag. This flag can be used to create noisy filters that result in all non-allowed actions to be logged. A process may have one noisy filter, which is loaded with this flag, as well as a quiet filter that's not loaded with this flag. This allows for the actions in a set of filters to be selectively conveyed to the admin. Since a system could have a large number of allocated seccomp_filter structs, struct packing was taken in consideration. On 64 bit x86, the new log member takes up one byte of an existing four byte hole in the struct. On 32 bit x86, the new log member creates a new four byte hole (unavoidable) and consumes one of those bytes. Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not capable of inspecting the audit log to verify that the actions taken in the filter were logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
/* Set log flag, if present. */
if (flags & SECCOMP_FILTER_FLAG_LOG)
filter->log = true;
seccomp: Add wait_killable semantic to seccomp user notifier This introduces a per-filter flag (SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV) that makes it so that when notifications are received by the supervisor the notifying process will transition to wait killable semantics. Although wait killable isn't a set of semantics formally exposed to userspace, the concept is searchable. If the notifying process is signaled prior to the notification being received by the userspace agent, it will be handled as normal. One quirk about how this is handled is that the notifying process only switches to TASK_KILLABLE if it receives a wakeup from either an addfd or a signal. This is to avoid an unnecessary wakeup of the notifying task. The reasons behind switching into wait_killable only after userspace receives the notification are: * Avoiding unncessary work - Often, workloads will perform work that they may abort (request racing comes to mind). This allows for syscalls to be aborted safely prior to the notification being received by the supervisor. In this, the supervisor doesn't end up doing work that the workload does not want to complete anyways. * Avoiding side effects - We don't want the syscall to be interruptible once the supervisor starts doing work because it may not be trivial to reverse the operation. For example, unmounting a file system may take a long time, and it's hard to rollback, or treat that as reentrant. * Avoid breaking runtimes - Various runtimes do not GC when they are during a syscall (or while running native code that subsequently calls a syscall). If many notifications are blocked, and not picked up by the supervisor, this can get the application into a bad state. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220503080958.20220-2-sargun@sargun.me
2022-05-03 08:09:56 +00:00
/* Set wait killable flag, if present. */
if (flags & SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV)
filter->wait_killable_recv = true;
/*
* If there is an existing filter, make it the prev and don't drop its
* task reference.
*/
filter->prev = current->seccomp.filter;
seccomp/cache: Add "emulator" to check if filter is constant allow SECCOMP_CACHE will only operate on syscalls that do not access any syscall arguments or instruction pointer. To facilitate this we need a static analyser to know whether a filter will return allow regardless of syscall arguments for a given architecture number / syscall number pair. This is implemented here with a pseudo-emulator, and stored in a per-filter bitmap. In order to build this bitmap at filter attach time, each filter is emulated for every syscall (under each possible architecture), and checked for any accesses of struct seccomp_data that are not the "arch" nor "nr" (syscall) members. If only "arch" and "nr" are examined, and the program returns allow, then we can be sure that the filter must return allow independent from syscall arguments. Nearly all seccomp filters are built from these cBPF instructions: BPF_LD | BPF_W | BPF_ABS BPF_JMP | BPF_JEQ | BPF_K BPF_JMP | BPF_JGE | BPF_K BPF_JMP | BPF_JGT | BPF_K BPF_JMP | BPF_JSET | BPF_K BPF_JMP | BPF_JA BPF_RET | BPF_K BPF_ALU | BPF_AND | BPF_K Each of these instructions are emulated. Any weirdness or loading from a syscall argument will cause the emulator to bail. The emulation is also halted if it reaches a return. In that case, if it returns an SECCOMP_RET_ALLOW, the syscall is marked as good. Emulator structure and comments are from Kees [1] and Jann [2]. Emulation is done at attach time. If a filter depends on more filters, and if the dependee does not guarantee to allow the syscall, then we skip the emulation of this syscall. [1] https://lore.kernel.org/lkml/20200923232923.3142503-5-keescook@chromium.org/ [2] https://lore.kernel.org/lkml/CAG48ez1p=dR_2ikKq=xVxkoGg0fYpTBpkhJSv1w-6BG=76PAvw@mail.gmail.com/ Suggested-by: Jann Horn <jannh@google.com> Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu> Reviewed-by: Jann Horn <jannh@google.com> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/71c7be2db5ee08905f41c3be5c1ad6e2601ce88f.1602431034.git.yifeifz2@illinois.edu
2020-10-11 15:47:43 +00:00
seccomp_cache_prepare(filter);
current->seccomp.filter = filter;
atomic_inc(&current->seccomp.filter_count);
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
/* Now that the new filter is in place, synchronize to all threads. */
if (flags & SECCOMP_FILTER_FLAG_TSYNC)
seccomp_sync_threads(flags);
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
return 0;
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
}
static void __get_seccomp_filter(struct seccomp_filter *filter)
{
refcount_inc(&filter->refs);
}
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
/* get_seccomp_filter - increments the reference count of the filter on @tsk */
void get_seccomp_filter(struct task_struct *tsk)
{
struct seccomp_filter *orig = tsk->seccomp.filter;
if (!orig)
return;
__get_seccomp_filter(orig);
seccomp: notify about unused filter We've been making heavy use of the seccomp notifier to intercept and handle certain syscalls for containers. This patch allows a syscall supervisor listening on a given notifier to be notified when a seccomp filter has become unused. A container is often managed by a singleton supervisor process the so-called "monitor". This monitor process has an event loop which has various event handlers registered. If the user specified a seccomp profile that included a notifier for various syscalls then we also register a seccomp notify even handler. For any container using a separate pid namespace the lifecycle of the seccomp notifier is bound to the init process of the pid namespace, i.e. when the init process exits the filter must be unused. If a new process attaches to a container we force it to assume a seccomp profile. This can either be the same seccomp profile as the container was started with or a modified one. If the attaching process makes use of the seccomp notifier we will register a new seccomp notifier handler in the monitor's event loop. However, when the attaching process exits we can't simply delete the handler since other child processes could've been created (daemons spawned etc.) that have inherited the seccomp filter and so we need to keep the seccomp notifier fd alive in the event loop. But this is problematic since we don't get a notification when the seccomp filter has become unused and so we currently never remove the seccomp notifier fd from the event loop and just keep accumulating fds in the event loop. We've had this issue for a while but it has recently become more pressing as more and larger users make use of this. To fix this, we introduce a new "users" reference counter that tracks any tasks and dependent filters making use of a filter. When a notifier is registered waiting tasks will be notified that the filter is now empty by receiving a (E)POLLHUP event. The concept in this patch introduces is the same as for signal_struct, i.e. reference counting for life-cycle management is decoupled from reference counting taks using the object. There's probably some trickery possible but the second counter is just the correct way of doing this IMHO and has precedence. Cc: Tycho Andersen <tycho@tycho.ws> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Denton <mpdenton@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Jann Horn <jannh@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Robert Sesek <rsesek@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Linux Containers <containers@lists.linux-foundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200531115031.391515-3-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31 11:50:30 +00:00
refcount_inc(&orig->users);
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
}
#endif /* CONFIG_SECCOMP_FILTER */
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
/* For use with seccomp_actions_logged */
#define SECCOMP_LOG_KILL_PROCESS (1 << 0)
#define SECCOMP_LOG_KILL_THREAD (1 << 1)
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
#define SECCOMP_LOG_TRAP (1 << 2)
#define SECCOMP_LOG_ERRNO (1 << 3)
#define SECCOMP_LOG_TRACE (1 << 4)
seccomp: Action to log before allowing Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing the syscall. At the implementation level, this action is identical to the existing SECCOMP_RET_ALLOW action. However, it can be very useful when initially developing a seccomp filter for an application. The developer can set the default action to be SECCOMP_RET_LOG, maybe mark any obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the application through its paces. A list of syscalls that triggered the default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and that list can be used to build the syscall whitelist. Finally, the developer can change the default action to the desired value. This provides a more friendly experience than seeing the application get killed, then updating the filter and rebuilding the app, seeing the application get killed due to a different syscall, then updating the filter and rebuilding the app, etc. The functionality is similar to what's supported by the various LSMs. SELinux has permissive mode, AppArmor has complain mode, SMACK has bring-up mode, etc. SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow while logging is slightly more restrictive than quietly allowing. Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of inspecting the audit log to verify that the syscall was logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if action == RET_LOG && RET_LOG in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:57 +00:00
#define SECCOMP_LOG_LOG (1 << 5)
#define SECCOMP_LOG_ALLOW (1 << 6)
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
#define SECCOMP_LOG_USER_NOTIF (1 << 7)
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
static u32 seccomp_actions_logged = SECCOMP_LOG_KILL_PROCESS |
SECCOMP_LOG_KILL_THREAD |
SECCOMP_LOG_TRAP |
SECCOMP_LOG_ERRNO |
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
SECCOMP_LOG_USER_NOTIF |
SECCOMP_LOG_TRACE |
seccomp: Action to log before allowing Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing the syscall. At the implementation level, this action is identical to the existing SECCOMP_RET_ALLOW action. However, it can be very useful when initially developing a seccomp filter for an application. The developer can set the default action to be SECCOMP_RET_LOG, maybe mark any obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the application through its paces. A list of syscalls that triggered the default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and that list can be used to build the syscall whitelist. Finally, the developer can change the default action to the desired value. This provides a more friendly experience than seeing the application get killed, then updating the filter and rebuilding the app, seeing the application get killed due to a different syscall, then updating the filter and rebuilding the app, etc. The functionality is similar to what's supported by the various LSMs. SELinux has permissive mode, AppArmor has complain mode, SMACK has bring-up mode, etc. SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow while logging is slightly more restrictive than quietly allowing. Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of inspecting the audit log to verify that the syscall was logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if action == RET_LOG && RET_LOG in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:57 +00:00
SECCOMP_LOG_LOG;
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for all actions except for SECCOMP_RET_ALLOW for the given filter. SECCOMP_RET_KILL actions are always logged, when "kill" is in the actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged, regardless of this flag. This flag can be used to create noisy filters that result in all non-allowed actions to be logged. A process may have one noisy filter, which is loaded with this flag, as well as a quiet filter that's not loaded with this flag. This allows for the actions in a set of filters to be selectively conveyed to the admin. Since a system could have a large number of allocated seccomp_filter structs, struct packing was taken in consideration. On 64 bit x86, the new log member takes up one byte of an existing four byte hole in the struct. On 32 bit x86, the new log member creates a new four byte hole (unavoidable) and consumes one of those bytes. Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not capable of inspecting the audit log to verify that the actions taken in the filter were logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
static inline void seccomp_log(unsigned long syscall, long signr, u32 action,
bool requested)
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
{
bool log = false;
switch (action) {
case SECCOMP_RET_ALLOW:
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for all actions except for SECCOMP_RET_ALLOW for the given filter. SECCOMP_RET_KILL actions are always logged, when "kill" is in the actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged, regardless of this flag. This flag can be used to create noisy filters that result in all non-allowed actions to be logged. A process may have one noisy filter, which is loaded with this flag, as well as a quiet filter that's not loaded with this flag. This allows for the actions in a set of filters to be selectively conveyed to the admin. Since a system could have a large number of allocated seccomp_filter structs, struct packing was taken in consideration. On 64 bit x86, the new log member takes up one byte of an existing four byte hole in the struct. On 32 bit x86, the new log member creates a new four byte hole (unavoidable) and consumes one of those bytes. Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not capable of inspecting the audit log to verify that the actions taken in the filter were logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
break;
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
case SECCOMP_RET_TRAP:
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for all actions except for SECCOMP_RET_ALLOW for the given filter. SECCOMP_RET_KILL actions are always logged, when "kill" is in the actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged, regardless of this flag. This flag can be used to create noisy filters that result in all non-allowed actions to be logged. A process may have one noisy filter, which is loaded with this flag, as well as a quiet filter that's not loaded with this flag. This allows for the actions in a set of filters to be selectively conveyed to the admin. Since a system could have a large number of allocated seccomp_filter structs, struct packing was taken in consideration. On 64 bit x86, the new log member takes up one byte of an existing four byte hole in the struct. On 32 bit x86, the new log member creates a new four byte hole (unavoidable) and consumes one of those bytes. Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not capable of inspecting the audit log to verify that the actions taken in the filter were logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
log = requested && seccomp_actions_logged & SECCOMP_LOG_TRAP;
break;
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
case SECCOMP_RET_ERRNO:
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for all actions except for SECCOMP_RET_ALLOW for the given filter. SECCOMP_RET_KILL actions are always logged, when "kill" is in the actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged, regardless of this flag. This flag can be used to create noisy filters that result in all non-allowed actions to be logged. A process may have one noisy filter, which is loaded with this flag, as well as a quiet filter that's not loaded with this flag. This allows for the actions in a set of filters to be selectively conveyed to the admin. Since a system could have a large number of allocated seccomp_filter structs, struct packing was taken in consideration. On 64 bit x86, the new log member takes up one byte of an existing four byte hole in the struct. On 32 bit x86, the new log member creates a new four byte hole (unavoidable) and consumes one of those bytes. Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not capable of inspecting the audit log to verify that the actions taken in the filter were logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
log = requested && seccomp_actions_logged & SECCOMP_LOG_ERRNO;
break;
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
case SECCOMP_RET_TRACE:
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for all actions except for SECCOMP_RET_ALLOW for the given filter. SECCOMP_RET_KILL actions are always logged, when "kill" is in the actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged, regardless of this flag. This flag can be used to create noisy filters that result in all non-allowed actions to be logged. A process may have one noisy filter, which is loaded with this flag, as well as a quiet filter that's not loaded with this flag. This allows for the actions in a set of filters to be selectively conveyed to the admin. Since a system could have a large number of allocated seccomp_filter structs, struct packing was taken in consideration. On 64 bit x86, the new log member takes up one byte of an existing four byte hole in the struct. On 32 bit x86, the new log member creates a new four byte hole (unavoidable) and consumes one of those bytes. Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not capable of inspecting the audit log to verify that the actions taken in the filter were logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
log = requested && seccomp_actions_logged & SECCOMP_LOG_TRACE;
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
break;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
case SECCOMP_RET_USER_NOTIF:
log = requested && seccomp_actions_logged & SECCOMP_LOG_USER_NOTIF;
break;
seccomp: Action to log before allowing Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing the syscall. At the implementation level, this action is identical to the existing SECCOMP_RET_ALLOW action. However, it can be very useful when initially developing a seccomp filter for an application. The developer can set the default action to be SECCOMP_RET_LOG, maybe mark any obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the application through its paces. A list of syscalls that triggered the default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and that list can be used to build the syscall whitelist. Finally, the developer can change the default action to the desired value. This provides a more friendly experience than seeing the application get killed, then updating the filter and rebuilding the app, seeing the application get killed due to a different syscall, then updating the filter and rebuilding the app, etc. The functionality is similar to what's supported by the various LSMs. SELinux has permissive mode, AppArmor has complain mode, SMACK has bring-up mode, etc. SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow while logging is slightly more restrictive than quietly allowing. Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of inspecting the audit log to verify that the syscall was logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if action == RET_LOG && RET_LOG in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:57 +00:00
case SECCOMP_RET_LOG:
log = seccomp_actions_logged & SECCOMP_LOG_LOG;
break;
case SECCOMP_RET_KILL_THREAD:
log = seccomp_actions_logged & SECCOMP_LOG_KILL_THREAD;
break;
case SECCOMP_RET_KILL_PROCESS:
default:
log = seccomp_actions_logged & SECCOMP_LOG_KILL_PROCESS;
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
}
/*
* Emit an audit message when the action is RET_KILL_*, RET_LOG, or the
* FILTER_FLAG_LOG bit was set. The admin has the ability to silence
* any action from being logged by removing the action name from the
* seccomp_actions_logged sysctl.
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
*/
if (!log)
return;
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
audit_seccomp(syscall, signr, action);
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
}
/*
* Secure computing mode 1 allows only read/write/exit/sigreturn.
* To be fully secure this must be combined with rlimit
* to limit the stack allocations too.
*/
static const int mode1_syscalls[] = {
__NR_seccomp_read, __NR_seccomp_write, __NR_seccomp_exit, __NR_seccomp_sigreturn,
-1, /* negative terminated */
};
static void __secure_computing_strict(int this_syscall)
{
const int *allowed_syscalls = mode1_syscalls;
#ifdef CONFIG_COMPAT
if (in_compat_syscall())
allowed_syscalls = get_compat_mode1_syscalls();
#endif
do {
if (*allowed_syscalls == this_syscall)
return;
} while (*++allowed_syscalls != -1);
#ifdef SECCOMP_DEBUG
dump_stack();
#endif
current->seccomp.mode = SECCOMP_MODE_DEAD;
seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL_THREAD, true);
do_exit(SIGKILL);
}
#ifndef CONFIG_HAVE_ARCH_SECCOMP_FILTER
void secure_computing_strict(int this_syscall)
{
int mode = current->seccomp.mode;
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_CHECKPOINT_RESTORE) &&
seccomp: add ptrace options for suspend/resume This patch is the first step in enabling checkpoint/restore of processes with seccomp enabled. One of the things CRIU does while dumping tasks is inject code into them via ptrace to collect information that is only available to the process itself. However, if we are in a seccomp mode where these processes are prohibited from making these syscalls, then what CRIU does kills the task. This patch adds a new ptrace option, PTRACE_O_SUSPEND_SECCOMP, that enables a task from the init user namespace which has CAP_SYS_ADMIN and no seccomp filters to disable (and re-enable) seccomp filters for another task so that they can be successfully dumped (and restored). We restrict the set of processes that can disable seccomp through ptrace because although today ptrace can be used to bypass seccomp, there is some discussion of closing this loophole in the future and we would like this patch to not depend on that behavior and be future proofed for when it is removed. Note that seccomp can be suspended before any filters are actually installed; this behavior is useful on criu restore, so that we can suspend seccomp, restore the filters, unmap our restore code from the restored process' address space, and then resume the task by detaching and have the filters resumed as well. v2 changes: * require that the tracer have no seccomp filters installed * drop TIF_NOTSC manipulation from the patch * change from ptrace command to a ptrace option and use this ptrace option as the flag to check. This means that as soon as the tracer detaches/dies, seccomp is re-enabled and as a corrollary that one can not disable seccomp across PTRACE_ATTACHs. v3 changes: * get rid of various #ifdefs everywhere * report more sensible errors when PTRACE_O_SUSPEND_SECCOMP is incorrectly used v4 changes: * get rid of may_suspend_seccomp() in favor of a capable() check in ptrace directly v5 changes: * check that seccomp is not enabled (or suspended) on the tracer Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> CC: Will Drewry <wad@chromium.org> CC: Roland McGrath <roland@hack.frob.com> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Andy Lutomirski <luto@amacapital.net> [kees: access seccomp.mode through seccomp_mode() instead] Signed-off-by: Kees Cook <keescook@chromium.org>
2015-06-13 15:02:48 +00:00
unlikely(current->ptrace & PT_SUSPEND_SECCOMP))
return;
if (mode == SECCOMP_MODE_DISABLED)
return;
else if (mode == SECCOMP_MODE_STRICT)
__secure_computing_strict(this_syscall);
else
BUG();
}
#else
#ifdef CONFIG_SECCOMP_FILTER
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
static u64 seccomp_next_notify_id(struct seccomp_filter *filter)
{
/*
* Note: overflow is ok here, the id just needs to be unique per
* filter.
*/
lockdep_assert_held(&filter->notify_lock);
return filter->notif->next_id++;
}
seccomp: Support atomic "addfd + send reply" Alban Crequy reported a race condition userspace faces when we want to add some fds and make the syscall return them[1] using seccomp notify. The problem is that currently two different ioctl() calls are needed by the process handling the syscalls (agent) for another userspace process (target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible for the agent to do the first ioctl to add a file descriptor but the target is interrupted (EINTR) before the agent does the second ioctl() call. This patch adds a flag to the ADDFD ioctl() so it adds the fd and returns that value atomically to the target program, as suggested by Kees Cook[2]. This is done by simply allowing seccomp_do_user_notification() to add the fd and return it in this case. Therefore, in this case the target wakes up from the wait in seccomp_do_user_notification() either to interrupt the syscall or to add the fd and return it. This "allocate an fd and return" functionality is useful for syscalls that return a file descriptor only, like connect(2). Other syscalls that return a file descriptor but not as return value (or return more than one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not work with this flag. This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's return value, nor error can be set by the user. Upon successful invocation of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND flag, the notifying process's errno will be 0, and the return value will be the file descriptor number that was installed. [1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/ Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io> Signed-off-by: Sargun Dhillon <sargun@sargun.me> Acked-by: Tycho Andersen <tycho@tycho.pizza> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
static void seccomp_handle_addfd(struct seccomp_kaddfd *addfd, struct seccomp_knotif *n)
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
{
seccomp: Support atomic "addfd + send reply" Alban Crequy reported a race condition userspace faces when we want to add some fds and make the syscall return them[1] using seccomp notify. The problem is that currently two different ioctl() calls are needed by the process handling the syscalls (agent) for another userspace process (target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible for the agent to do the first ioctl to add a file descriptor but the target is interrupted (EINTR) before the agent does the second ioctl() call. This patch adds a flag to the ADDFD ioctl() so it adds the fd and returns that value atomically to the target program, as suggested by Kees Cook[2]. This is done by simply allowing seccomp_do_user_notification() to add the fd and return it in this case. Therefore, in this case the target wakes up from the wait in seccomp_do_user_notification() either to interrupt the syscall or to add the fd and return it. This "allocate an fd and return" functionality is useful for syscalls that return a file descriptor only, like connect(2). Other syscalls that return a file descriptor but not as return value (or return more than one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not work with this flag. This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's return value, nor error can be set by the user. Upon successful invocation of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND flag, the notifying process's errno will be 0, and the return value will be the file descriptor number that was installed. [1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/ Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io> Signed-off-by: Sargun Dhillon <sargun@sargun.me> Acked-by: Tycho Andersen <tycho@tycho.pizza> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
int fd;
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
/*
* Remove the notification, and reset the list pointers, indicating
* that it has been handled.
*/
list_del_init(&addfd->list);
if (!addfd->setfd)
seccomp: Support atomic "addfd + send reply" Alban Crequy reported a race condition userspace faces when we want to add some fds and make the syscall return them[1] using seccomp notify. The problem is that currently two different ioctl() calls are needed by the process handling the syscalls (agent) for another userspace process (target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible for the agent to do the first ioctl to add a file descriptor but the target is interrupted (EINTR) before the agent does the second ioctl() call. This patch adds a flag to the ADDFD ioctl() so it adds the fd and returns that value atomically to the target program, as suggested by Kees Cook[2]. This is done by simply allowing seccomp_do_user_notification() to add the fd and return it in this case. Therefore, in this case the target wakes up from the wait in seccomp_do_user_notification() either to interrupt the syscall or to add the fd and return it. This "allocate an fd and return" functionality is useful for syscalls that return a file descriptor only, like connect(2). Other syscalls that return a file descriptor but not as return value (or return more than one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not work with this flag. This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's return value, nor error can be set by the user. Upon successful invocation of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND flag, the notifying process's errno will be 0, and the return value will be the file descriptor number that was installed. [1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/ Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io> Signed-off-by: Sargun Dhillon <sargun@sargun.me> Acked-by: Tycho Andersen <tycho@tycho.pizza> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
fd = receive_fd(addfd->file, addfd->flags);
else
seccomp: Support atomic "addfd + send reply" Alban Crequy reported a race condition userspace faces when we want to add some fds and make the syscall return them[1] using seccomp notify. The problem is that currently two different ioctl() calls are needed by the process handling the syscalls (agent) for another userspace process (target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible for the agent to do the first ioctl to add a file descriptor but the target is interrupted (EINTR) before the agent does the second ioctl() call. This patch adds a flag to the ADDFD ioctl() so it adds the fd and returns that value atomically to the target program, as suggested by Kees Cook[2]. This is done by simply allowing seccomp_do_user_notification() to add the fd and return it in this case. Therefore, in this case the target wakes up from the wait in seccomp_do_user_notification() either to interrupt the syscall or to add the fd and return it. This "allocate an fd and return" functionality is useful for syscalls that return a file descriptor only, like connect(2). Other syscalls that return a file descriptor but not as return value (or return more than one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not work with this flag. This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's return value, nor error can be set by the user. Upon successful invocation of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND flag, the notifying process's errno will be 0, and the return value will be the file descriptor number that was installed. [1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/ Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io> Signed-off-by: Sargun Dhillon <sargun@sargun.me> Acked-by: Tycho Andersen <tycho@tycho.pizza> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
fd = receive_fd_replace(addfd->fd, addfd->file, addfd->flags);
addfd->ret = fd;
if (addfd->ioctl_flags & SECCOMP_ADDFD_FLAG_SEND) {
/* If we fail reset and return an error to the notifier */
if (fd < 0) {
n->state = SECCOMP_NOTIFY_SENT;
} else {
/* Return the FD we just added */
n->flags = 0;
n->error = 0;
n->val = fd;
}
}
/*
* Mark the notification as completed. From this point, addfd mem
* might be invalidated and we can't safely read it anymore.
*/
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
complete(&addfd->completion);
}
seccomp: Add wait_killable semantic to seccomp user notifier This introduces a per-filter flag (SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV) that makes it so that when notifications are received by the supervisor the notifying process will transition to wait killable semantics. Although wait killable isn't a set of semantics formally exposed to userspace, the concept is searchable. If the notifying process is signaled prior to the notification being received by the userspace agent, it will be handled as normal. One quirk about how this is handled is that the notifying process only switches to TASK_KILLABLE if it receives a wakeup from either an addfd or a signal. This is to avoid an unnecessary wakeup of the notifying task. The reasons behind switching into wait_killable only after userspace receives the notification are: * Avoiding unncessary work - Often, workloads will perform work that they may abort (request racing comes to mind). This allows for syscalls to be aborted safely prior to the notification being received by the supervisor. In this, the supervisor doesn't end up doing work that the workload does not want to complete anyways. * Avoiding side effects - We don't want the syscall to be interruptible once the supervisor starts doing work because it may not be trivial to reverse the operation. For example, unmounting a file system may take a long time, and it's hard to rollback, or treat that as reentrant. * Avoid breaking runtimes - Various runtimes do not GC when they are during a syscall (or while running native code that subsequently calls a syscall). If many notifications are blocked, and not picked up by the supervisor, this can get the application into a bad state. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220503080958.20220-2-sargun@sargun.me
2022-05-03 08:09:56 +00:00
static bool should_sleep_killable(struct seccomp_filter *match,
struct seccomp_knotif *n)
{
return match->wait_killable_recv && n->state == SECCOMP_NOTIFY_SENT;
}
seccomp: add SECCOMP_USER_NOTIF_FLAG_CONTINUE This allows the seccomp notifier to continue a syscall. A positive discussion about this feature was triggered by a post to the ksummit-discuss mailing list (cf. [3]) and took place during KSummit (cf. [1]) and again at the containers/checkpoint-restore micro-conference at Linux Plumbers. Recently we landed seccomp support for SECCOMP_RET_USER_NOTIF (cf. [4]) which enables a process (watchee) to retrieve an fd for its seccomp filter. This fd can then be handed to another (usually more privileged) process (watcher). The watcher will then be able to receive seccomp messages about the syscalls having been performed by the watchee. This feature is heavily used in some userspace workloads. For example, it is currently used to intercept mknod() syscalls in user namespaces aka in containers. The mknod() syscall can be easily filtered based on dev_t. This allows us to only intercept a very specific subset of mknod() syscalls. Furthermore, mknod() is not possible in user namespaces toto coelo and so intercepting and denying syscalls that are not in the whitelist on accident is not a big deal. The watchee won't notice a difference. In contrast to mknod(), a lot of other syscall we intercept (e.g. setxattr()) cannot be easily filtered like mknod() because they have pointer arguments. Additionally, some of them might actually succeed in user namespaces (e.g. setxattr() for all "user.*" xattrs). Since we currently cannot tell seccomp to continue from a user notifier we are stuck with performing all of the syscalls in lieu of the container. This is a huge security liability since it is extremely difficult to correctly assume all of the necessary privileges of the calling task such that the syscall can be successfully emulated without escaping other additional security restrictions (think missing CAP_MKNOD for mknod(), or MS_NODEV on a filesystem etc.). This can be solved by telling seccomp to resume the syscall. One thing that came up in the discussion was the problem that another thread could change the memory after userspace has decided to let the syscall continue which is a well known TOCTOU with seccomp which is present in other ways already. The discussion showed that this feature is already very useful for any syscall without pointer arguments. For any accidentally intercepted non-pointer syscall it is safe to continue. For syscalls with pointer arguments there is a race but for any cautious userspace and the main usec cases the race doesn't matter. The notifier is intended to be used in a scenario where a more privileged watcher supervises the syscalls of lesser privileged watchee to allow it to get around kernel-enforced limitations by performing the syscall for it whenever deemed save by the watcher. Hence, if a user tricks the watcher into allowing a syscall they will either get a deny based on kernel-enforced restrictions later or they will have changed the arguments in such a way that they manage to perform a syscall with arguments that they would've been allowed to do anyway. In general, it is good to point out again, that the notifier fd was not intended to allow userspace to implement a security policy but rather to work around kernel security mechanisms in cases where the watcher knows that a given action is safe to perform. /* References */ [1]: https://linuxplumbersconf.org/event/4/contributions/560 [2]: https://linuxplumbersconf.org/event/4/contributions/477 [3]: https://lore.kernel.org/r/20190719093538.dhyopljyr5ns33qx@brauner.io [4]: commit 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> CC: Tyler Hicks <tyhicks@canonical.com> Link: https://lore.kernel.org/r/20190920083007.11475-2-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2019-09-20 08:30:05 +00:00
static int seccomp_do_user_notification(int this_syscall,
struct seccomp_filter *match,
const struct seccomp_data *sd)
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
{
int err;
seccomp: add SECCOMP_USER_NOTIF_FLAG_CONTINUE This allows the seccomp notifier to continue a syscall. A positive discussion about this feature was triggered by a post to the ksummit-discuss mailing list (cf. [3]) and took place during KSummit (cf. [1]) and again at the containers/checkpoint-restore micro-conference at Linux Plumbers. Recently we landed seccomp support for SECCOMP_RET_USER_NOTIF (cf. [4]) which enables a process (watchee) to retrieve an fd for its seccomp filter. This fd can then be handed to another (usually more privileged) process (watcher). The watcher will then be able to receive seccomp messages about the syscalls having been performed by the watchee. This feature is heavily used in some userspace workloads. For example, it is currently used to intercept mknod() syscalls in user namespaces aka in containers. The mknod() syscall can be easily filtered based on dev_t. This allows us to only intercept a very specific subset of mknod() syscalls. Furthermore, mknod() is not possible in user namespaces toto coelo and so intercepting and denying syscalls that are not in the whitelist on accident is not a big deal. The watchee won't notice a difference. In contrast to mknod(), a lot of other syscall we intercept (e.g. setxattr()) cannot be easily filtered like mknod() because they have pointer arguments. Additionally, some of them might actually succeed in user namespaces (e.g. setxattr() for all "user.*" xattrs). Since we currently cannot tell seccomp to continue from a user notifier we are stuck with performing all of the syscalls in lieu of the container. This is a huge security liability since it is extremely difficult to correctly assume all of the necessary privileges of the calling task such that the syscall can be successfully emulated without escaping other additional security restrictions (think missing CAP_MKNOD for mknod(), or MS_NODEV on a filesystem etc.). This can be solved by telling seccomp to resume the syscall. One thing that came up in the discussion was the problem that another thread could change the memory after userspace has decided to let the syscall continue which is a well known TOCTOU with seccomp which is present in other ways already. The discussion showed that this feature is already very useful for any syscall without pointer arguments. For any accidentally intercepted non-pointer syscall it is safe to continue. For syscalls with pointer arguments there is a race but for any cautious userspace and the main usec cases the race doesn't matter. The notifier is intended to be used in a scenario where a more privileged watcher supervises the syscalls of lesser privileged watchee to allow it to get around kernel-enforced limitations by performing the syscall for it whenever deemed save by the watcher. Hence, if a user tricks the watcher into allowing a syscall they will either get a deny based on kernel-enforced restrictions later or they will have changed the arguments in such a way that they manage to perform a syscall with arguments that they would've been allowed to do anyway. In general, it is good to point out again, that the notifier fd was not intended to allow userspace to implement a security policy but rather to work around kernel security mechanisms in cases where the watcher knows that a given action is safe to perform. /* References */ [1]: https://linuxplumbersconf.org/event/4/contributions/560 [2]: https://linuxplumbersconf.org/event/4/contributions/477 [3]: https://lore.kernel.org/r/20190719093538.dhyopljyr5ns33qx@brauner.io [4]: commit 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> CC: Tyler Hicks <tyhicks@canonical.com> Link: https://lore.kernel.org/r/20190920083007.11475-2-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2019-09-20 08:30:05 +00:00
u32 flags = 0;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
long ret = 0;
struct seccomp_knotif n = {};
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
struct seccomp_kaddfd *addfd, *tmp;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
mutex_lock(&match->notify_lock);
err = -ENOSYS;
if (!match->notif)
goto out;
n.task = current;
n.state = SECCOMP_NOTIFY_INIT;
n.data = sd;
n.id = seccomp_next_notify_id(match);
init_completion(&n.ready);
list_add_tail(&n.list, &match->notif->notifications);
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
INIT_LIST_HEAD(&n.addfd);
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
up(&match->notif->request);
wake_up_poll(&match->wqh, EPOLLIN | EPOLLRDNORM);
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
/*
* This is where we wait for a reply from userspace.
*/
do {
seccomp: Add wait_killable semantic to seccomp user notifier This introduces a per-filter flag (SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV) that makes it so that when notifications are received by the supervisor the notifying process will transition to wait killable semantics. Although wait killable isn't a set of semantics formally exposed to userspace, the concept is searchable. If the notifying process is signaled prior to the notification being received by the userspace agent, it will be handled as normal. One quirk about how this is handled is that the notifying process only switches to TASK_KILLABLE if it receives a wakeup from either an addfd or a signal. This is to avoid an unnecessary wakeup of the notifying task. The reasons behind switching into wait_killable only after userspace receives the notification are: * Avoiding unncessary work - Often, workloads will perform work that they may abort (request racing comes to mind). This allows for syscalls to be aborted safely prior to the notification being received by the supervisor. In this, the supervisor doesn't end up doing work that the workload does not want to complete anyways. * Avoiding side effects - We don't want the syscall to be interruptible once the supervisor starts doing work because it may not be trivial to reverse the operation. For example, unmounting a file system may take a long time, and it's hard to rollback, or treat that as reentrant. * Avoid breaking runtimes - Various runtimes do not GC when they are during a syscall (or while running native code that subsequently calls a syscall). If many notifications are blocked, and not picked up by the supervisor, this can get the application into a bad state. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220503080958.20220-2-sargun@sargun.me
2022-05-03 08:09:56 +00:00
bool wait_killable = should_sleep_killable(match, &n);
mutex_unlock(&match->notify_lock);
seccomp: Add wait_killable semantic to seccomp user notifier This introduces a per-filter flag (SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV) that makes it so that when notifications are received by the supervisor the notifying process will transition to wait killable semantics. Although wait killable isn't a set of semantics formally exposed to userspace, the concept is searchable. If the notifying process is signaled prior to the notification being received by the userspace agent, it will be handled as normal. One quirk about how this is handled is that the notifying process only switches to TASK_KILLABLE if it receives a wakeup from either an addfd or a signal. This is to avoid an unnecessary wakeup of the notifying task. The reasons behind switching into wait_killable only after userspace receives the notification are: * Avoiding unncessary work - Often, workloads will perform work that they may abort (request racing comes to mind). This allows for syscalls to be aborted safely prior to the notification being received by the supervisor. In this, the supervisor doesn't end up doing work that the workload does not want to complete anyways. * Avoiding side effects - We don't want the syscall to be interruptible once the supervisor starts doing work because it may not be trivial to reverse the operation. For example, unmounting a file system may take a long time, and it's hard to rollback, or treat that as reentrant. * Avoid breaking runtimes - Various runtimes do not GC when they are during a syscall (or while running native code that subsequently calls a syscall). If many notifications are blocked, and not picked up by the supervisor, this can get the application into a bad state. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220503080958.20220-2-sargun@sargun.me
2022-05-03 08:09:56 +00:00
if (wait_killable)
err = wait_for_completion_killable(&n.ready);
else
err = wait_for_completion_interruptible(&n.ready);
mutex_lock(&match->notify_lock);
seccomp: Add wait_killable semantic to seccomp user notifier This introduces a per-filter flag (SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV) that makes it so that when notifications are received by the supervisor the notifying process will transition to wait killable semantics. Although wait killable isn't a set of semantics formally exposed to userspace, the concept is searchable. If the notifying process is signaled prior to the notification being received by the userspace agent, it will be handled as normal. One quirk about how this is handled is that the notifying process only switches to TASK_KILLABLE if it receives a wakeup from either an addfd or a signal. This is to avoid an unnecessary wakeup of the notifying task. The reasons behind switching into wait_killable only after userspace receives the notification are: * Avoiding unncessary work - Often, workloads will perform work that they may abort (request racing comes to mind). This allows for syscalls to be aborted safely prior to the notification being received by the supervisor. In this, the supervisor doesn't end up doing work that the workload does not want to complete anyways. * Avoiding side effects - We don't want the syscall to be interruptible once the supervisor starts doing work because it may not be trivial to reverse the operation. For example, unmounting a file system may take a long time, and it's hard to rollback, or treat that as reentrant. * Avoid breaking runtimes - Various runtimes do not GC when they are during a syscall (or while running native code that subsequently calls a syscall). If many notifications are blocked, and not picked up by the supervisor, this can get the application into a bad state. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220503080958.20220-2-sargun@sargun.me
2022-05-03 08:09:56 +00:00
if (err != 0) {
/*
* Check to see if the notifcation got picked up and
* whether we should switch to wait killable.
*/
if (!wait_killable && should_sleep_killable(match, &n))
continue;
goto interrupted;
seccomp: Add wait_killable semantic to seccomp user notifier This introduces a per-filter flag (SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV) that makes it so that when notifications are received by the supervisor the notifying process will transition to wait killable semantics. Although wait killable isn't a set of semantics formally exposed to userspace, the concept is searchable. If the notifying process is signaled prior to the notification being received by the userspace agent, it will be handled as normal. One quirk about how this is handled is that the notifying process only switches to TASK_KILLABLE if it receives a wakeup from either an addfd or a signal. This is to avoid an unnecessary wakeup of the notifying task. The reasons behind switching into wait_killable only after userspace receives the notification are: * Avoiding unncessary work - Often, workloads will perform work that they may abort (request racing comes to mind). This allows for syscalls to be aborted safely prior to the notification being received by the supervisor. In this, the supervisor doesn't end up doing work that the workload does not want to complete anyways. * Avoiding side effects - We don't want the syscall to be interruptible once the supervisor starts doing work because it may not be trivial to reverse the operation. For example, unmounting a file system may take a long time, and it's hard to rollback, or treat that as reentrant. * Avoid breaking runtimes - Various runtimes do not GC when they are during a syscall (or while running native code that subsequently calls a syscall). If many notifications are blocked, and not picked up by the supervisor, this can get the application into a bad state. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220503080958.20220-2-sargun@sargun.me
2022-05-03 08:09:56 +00:00
}
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
addfd = list_first_entry_or_null(&n.addfd,
struct seccomp_kaddfd, list);
/* Check if we were woken up by a addfd message */
if (addfd)
seccomp: Support atomic "addfd + send reply" Alban Crequy reported a race condition userspace faces when we want to add some fds and make the syscall return them[1] using seccomp notify. The problem is that currently two different ioctl() calls are needed by the process handling the syscalls (agent) for another userspace process (target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible for the agent to do the first ioctl to add a file descriptor but the target is interrupted (EINTR) before the agent does the second ioctl() call. This patch adds a flag to the ADDFD ioctl() so it adds the fd and returns that value atomically to the target program, as suggested by Kees Cook[2]. This is done by simply allowing seccomp_do_user_notification() to add the fd and return it in this case. Therefore, in this case the target wakes up from the wait in seccomp_do_user_notification() either to interrupt the syscall or to add the fd and return it. This "allocate an fd and return" functionality is useful for syscalls that return a file descriptor only, like connect(2). Other syscalls that return a file descriptor but not as return value (or return more than one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not work with this flag. This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's return value, nor error can be set by the user. Upon successful invocation of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND flag, the notifying process's errno will be 0, and the return value will be the file descriptor number that was installed. [1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/ Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io> Signed-off-by: Sargun Dhillon <sargun@sargun.me> Acked-by: Tycho Andersen <tycho@tycho.pizza> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
seccomp_handle_addfd(addfd, &n);
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
} while (n.state != SECCOMP_NOTIFY_REPLIED);
ret = n.val;
err = n.error;
flags = n.flags;
interrupted:
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
/* If there were any pending addfd calls, clear them out */
list_for_each_entry_safe(addfd, tmp, &n.addfd, list) {
/* The process went away before we got a chance to handle it */
addfd->ret = -ESRCH;
list_del_init(&addfd->list);
complete(&addfd->completion);
}
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
/*
* Note that it's possible the listener died in between the time when
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
* we were notified of a response (or a signal) and when we were able to
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
* re-acquire the lock, so only delete from the list if the
* notification actually exists.
*
* Also note that this test is only valid because there's no way to
* *reattach* to a notifier right now. If one is added, we'll need to
* keep track of the notif itself and make sure they match here.
*/
if (match->notif)
list_del(&n.list);
out:
mutex_unlock(&match->notify_lock);
seccomp: add SECCOMP_USER_NOTIF_FLAG_CONTINUE This allows the seccomp notifier to continue a syscall. A positive discussion about this feature was triggered by a post to the ksummit-discuss mailing list (cf. [3]) and took place during KSummit (cf. [1]) and again at the containers/checkpoint-restore micro-conference at Linux Plumbers. Recently we landed seccomp support for SECCOMP_RET_USER_NOTIF (cf. [4]) which enables a process (watchee) to retrieve an fd for its seccomp filter. This fd can then be handed to another (usually more privileged) process (watcher). The watcher will then be able to receive seccomp messages about the syscalls having been performed by the watchee. This feature is heavily used in some userspace workloads. For example, it is currently used to intercept mknod() syscalls in user namespaces aka in containers. The mknod() syscall can be easily filtered based on dev_t. This allows us to only intercept a very specific subset of mknod() syscalls. Furthermore, mknod() is not possible in user namespaces toto coelo and so intercepting and denying syscalls that are not in the whitelist on accident is not a big deal. The watchee won't notice a difference. In contrast to mknod(), a lot of other syscall we intercept (e.g. setxattr()) cannot be easily filtered like mknod() because they have pointer arguments. Additionally, some of them might actually succeed in user namespaces (e.g. setxattr() for all "user.*" xattrs). Since we currently cannot tell seccomp to continue from a user notifier we are stuck with performing all of the syscalls in lieu of the container. This is a huge security liability since it is extremely difficult to correctly assume all of the necessary privileges of the calling task such that the syscall can be successfully emulated without escaping other additional security restrictions (think missing CAP_MKNOD for mknod(), or MS_NODEV on a filesystem etc.). This can be solved by telling seccomp to resume the syscall. One thing that came up in the discussion was the problem that another thread could change the memory after userspace has decided to let the syscall continue which is a well known TOCTOU with seccomp which is present in other ways already. The discussion showed that this feature is already very useful for any syscall without pointer arguments. For any accidentally intercepted non-pointer syscall it is safe to continue. For syscalls with pointer arguments there is a race but for any cautious userspace and the main usec cases the race doesn't matter. The notifier is intended to be used in a scenario where a more privileged watcher supervises the syscalls of lesser privileged watchee to allow it to get around kernel-enforced limitations by performing the syscall for it whenever deemed save by the watcher. Hence, if a user tricks the watcher into allowing a syscall they will either get a deny based on kernel-enforced restrictions later or they will have changed the arguments in such a way that they manage to perform a syscall with arguments that they would've been allowed to do anyway. In general, it is good to point out again, that the notifier fd was not intended to allow userspace to implement a security policy but rather to work around kernel security mechanisms in cases where the watcher knows that a given action is safe to perform. /* References */ [1]: https://linuxplumbersconf.org/event/4/contributions/560 [2]: https://linuxplumbersconf.org/event/4/contributions/477 [3]: https://lore.kernel.org/r/20190719093538.dhyopljyr5ns33qx@brauner.io [4]: commit 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> CC: Tyler Hicks <tyhicks@canonical.com> Link: https://lore.kernel.org/r/20190920083007.11475-2-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2019-09-20 08:30:05 +00:00
/* Userspace requests to continue the syscall. */
if (flags & SECCOMP_USER_NOTIF_FLAG_CONTINUE)
return 0;
syscall_set_return_value(current, current_pt_regs(),
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
err, ret);
seccomp: add SECCOMP_USER_NOTIF_FLAG_CONTINUE This allows the seccomp notifier to continue a syscall. A positive discussion about this feature was triggered by a post to the ksummit-discuss mailing list (cf. [3]) and took place during KSummit (cf. [1]) and again at the containers/checkpoint-restore micro-conference at Linux Plumbers. Recently we landed seccomp support for SECCOMP_RET_USER_NOTIF (cf. [4]) which enables a process (watchee) to retrieve an fd for its seccomp filter. This fd can then be handed to another (usually more privileged) process (watcher). The watcher will then be able to receive seccomp messages about the syscalls having been performed by the watchee. This feature is heavily used in some userspace workloads. For example, it is currently used to intercept mknod() syscalls in user namespaces aka in containers. The mknod() syscall can be easily filtered based on dev_t. This allows us to only intercept a very specific subset of mknod() syscalls. Furthermore, mknod() is not possible in user namespaces toto coelo and so intercepting and denying syscalls that are not in the whitelist on accident is not a big deal. The watchee won't notice a difference. In contrast to mknod(), a lot of other syscall we intercept (e.g. setxattr()) cannot be easily filtered like mknod() because they have pointer arguments. Additionally, some of them might actually succeed in user namespaces (e.g. setxattr() for all "user.*" xattrs). Since we currently cannot tell seccomp to continue from a user notifier we are stuck with performing all of the syscalls in lieu of the container. This is a huge security liability since it is extremely difficult to correctly assume all of the necessary privileges of the calling task such that the syscall can be successfully emulated without escaping other additional security restrictions (think missing CAP_MKNOD for mknod(), or MS_NODEV on a filesystem etc.). This can be solved by telling seccomp to resume the syscall. One thing that came up in the discussion was the problem that another thread could change the memory after userspace has decided to let the syscall continue which is a well known TOCTOU with seccomp which is present in other ways already. The discussion showed that this feature is already very useful for any syscall without pointer arguments. For any accidentally intercepted non-pointer syscall it is safe to continue. For syscalls with pointer arguments there is a race but for any cautious userspace and the main usec cases the race doesn't matter. The notifier is intended to be used in a scenario where a more privileged watcher supervises the syscalls of lesser privileged watchee to allow it to get around kernel-enforced limitations by performing the syscall for it whenever deemed save by the watcher. Hence, if a user tricks the watcher into allowing a syscall they will either get a deny based on kernel-enforced restrictions later or they will have changed the arguments in such a way that they manage to perform a syscall with arguments that they would've been allowed to do anyway. In general, it is good to point out again, that the notifier fd was not intended to allow userspace to implement a security policy but rather to work around kernel security mechanisms in cases where the watcher knows that a given action is safe to perform. /* References */ [1]: https://linuxplumbersconf.org/event/4/contributions/560 [2]: https://linuxplumbersconf.org/event/4/contributions/477 [3]: https://lore.kernel.org/r/20190719093538.dhyopljyr5ns33qx@brauner.io [4]: commit 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> CC: Tyler Hicks <tyhicks@canonical.com> Link: https://lore.kernel.org/r/20190920083007.11475-2-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2019-09-20 08:30:05 +00:00
return -1;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
}
static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd,
const bool recheck_after_trace)
{
u32 filter_ret, action;
struct seccomp_filter *match = NULL;
int data;
struct seccomp_data sd_local;
/*
* Make sure that any changes to mode from another thread have
* been seen after SYSCALL_WORK_SECCOMP was seen.
*/
seccomp: Improve performace by optimizing rmb() According to Kees's suggest, we started with the patch that just replaces rmb() with smp_rmb() and did a performance test with UnixBench. The results showed the overhead about 2.53% in rmb() test compared to the smp_rmb() one, in a x86-64 kernel with CONFIG_SMP enabled running inside a qemu-kvm vm. The test is a "syscall" testcase in UnixBench, which executes 5 syscalls in a loop during a certain timeout (100 second in our test) and counts the total number of executions of this 5-syscall sequence. We set a seccomp filter with all allow rule for all used syscalls in this test (which will go bitmap path) to make sure the rmb() will be executed. The details for the test: with rmb(): /txm # ./syscall_allow_min 100 COUNT|35861159|1|lps /txm # ./syscall_allow_min 100 COUNT|35545501|1|lps /txm # ./syscall_allow_min 100 COUNT|35664495|1|lps with smp_rmb(): /txm # ./syscall_allow_min 100 COUNT|36552771|1|lps /txm # ./syscall_allow_min 100 COUNT|36491247|1|lps /txm # ./syscall_allow_min 100 COUNT|36504746|1|lps For a x86-64 kernel with CONFIG_SMP enabled, the smp_rmb() is just a compiler barrier() which have no impact in runtime, while rmb() is a lfence which will prevent all memory access operations (not just load according the recently claim by Intel) behind itself. We can also figure it out in disassembly: with rmb(): 0000000000001430 <__seccomp_filter>: 1430: 41 57 push %r15 1432: 41 56 push %r14 1434: 41 55 push %r13 1436: 41 54 push %r12 1438: 55 push %rbp 1439: 53 push %rbx 143a: 48 81 ec 90 00 00 00 sub $0x90,%rsp 1441: 89 7c 24 10 mov %edi,0x10(%rsp) 1445: 89 54 24 14 mov %edx,0x14(%rsp) 1449: 65 48 8b 04 25 28 00 mov %gs:0x28,%rax 1450: 00 00 1452: 48 89 84 24 88 00 00 mov %rax,0x88(%rsp) 1459: 00 145a: 31 c0 xor %eax,%eax * 145c: 0f ae e8 lfence 145f: 48 85 f6 test %rsi,%rsi 1462: 49 89 f4 mov %rsi,%r12 1465: 0f 84 42 03 00 00 je 17ad <__seccomp_filter+0x37d> 146b: 65 48 8b 04 25 00 00 mov %gs:0x0,%rax 1472: 00 00 1474: 48 8b 98 80 07 00 00 mov 0x780(%rax),%rbx 147b: 48 85 db test %rbx,%rbx with smp_rmb(); 0000000000001430 <__seccomp_filter>: 1430: 41 57 push %r15 1432: 41 56 push %r14 1434: 41 55 push %r13 1436: 41 54 push %r12 1438: 55 push %rbp 1439: 53 push %rbx 143a: 48 81 ec 90 00 00 00 sub $0x90,%rsp 1441: 89 7c 24 10 mov %edi,0x10(%rsp) 1445: 89 54 24 14 mov %edx,0x14(%rsp) 1449: 65 48 8b 04 25 28 00 mov %gs:0x28,%rax 1450: 00 00 1452: 48 89 84 24 88 00 00 mov %rax,0x88(%rsp) 1459: 00 145a: 31 c0 xor %eax,%eax 145c: 48 85 f6 test %rsi,%rsi 145f: 49 89 f4 mov %rsi,%r12 1462: 0f 84 42 03 00 00 je 17aa <__seccomp_filter+0x37a> 1468: 65 48 8b 04 25 00 00 mov %gs:0x0,%rax 146f: 00 00 1471: 48 8b 98 80 07 00 00 mov 0x780(%rax),%rbx 1478: 48 85 db test %rbx,%rbx Signed-off-by: wanghongzhe <wanghongzhe@huawei.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/1612496049-32507-1-git-send-email-wanghongzhe@huawei.com
2021-02-05 03:34:09 +00:00
smp_rmb();
if (!sd) {
populate_seccomp_data(&sd_local);
sd = &sd_local;
}
filter_ret = seccomp_run_filters(sd, &match);
data = filter_ret & SECCOMP_RET_DATA;
seccomp: Implement SECCOMP_RET_KILL_PROCESS action Right now, SECCOMP_RET_KILL_THREAD (neé SECCOMP_RET_KILL) kills the current thread. There have been a few requests for this to kill the entire process (the thread group). This cannot be just changed (discovered when adding coredump support since coredumping kills the entire process) because there are userspace programs depending on the thread-kill behavior. Instead, implement SECCOMP_RET_KILL_PROCESS, which is 0x80000000, and can be processed as "-1" by the kernel, below the existing RET_KILL that is ABI-set to "0". For userspace, SECCOMP_RET_ACTION_FULL is added to expand the mask to the signed bit. Old userspace using the SECCOMP_RET_ACTION mask will see SECCOMP_RET_KILL_PROCESS as 0 still, but this would only be visible when examining the siginfo in a core dump from a RET_KILL_*, where it will think it was thread-killed instead of process-killed. Attempts to introduce this behavior via other ways (filter flags, seccomp struct flags, masked RET_DATA bits) all come with weird side-effects and baggage. This change preserves the central behavioral expectations of the seccomp filter engine without putting too great a burden on changes needed in userspace to use the new action. The new action is discoverable by userspace through either the new actions_avail sysctl or through the SECCOMP_GET_ACTION_AVAIL seccomp operation. If used without checking for availability, old kernels will treat RET_KILL_PROCESS as RET_KILL_THREAD (since the old mask will produce RET_KILL_THREAD). Cc: Paul Moore <paul@paul-moore.com> Cc: Fabricio Voznika <fvoznika@google.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 20:12:11 +00:00
action = filter_ret & SECCOMP_RET_ACTION_FULL;
switch (action) {
case SECCOMP_RET_ERRNO:
/* Set low-order bits as an errno, capped at MAX_ERRNO. */
if (data > MAX_ERRNO)
data = MAX_ERRNO;
syscall_set_return_value(current, current_pt_regs(),
-data, 0);
goto skip;
case SECCOMP_RET_TRAP:
/* Show the handler the original registers. */
syscall_rollback(current, current_pt_regs());
/* Let the filter pass back 16 bits of data. */
force_sig_seccomp(this_syscall, data, false);
goto skip;
case SECCOMP_RET_TRACE:
/* We've been put in this state by the ptracer already. */
if (recheck_after_trace)
return 0;
/* ENOSYS these calls if there is no tracer attached. */
if (!ptrace_event_enabled(current, PTRACE_EVENT_SECCOMP)) {
syscall_set_return_value(current,
current_pt_regs(),
-ENOSYS, 0);
goto skip;
}
/* Allow the BPF to provide the event message */
ptrace_event(PTRACE_EVENT_SECCOMP, data);
/*
* The delivery of a fatal signal during event
seccomp: Fix tracer exit notifications during fatal signals This fixes a ptrace vs fatal pending signals bug as manifested in seccomp now that seccomp was reordered to happen after ptrace. The short version is that seccomp should not attempt to call do_exit() while fatal signals are pending under a tracer. The existing code was trying to be as defensively paranoid as possible, but it now ends up confusing ptrace. Instead, the syscall can just be skipped (which solves the original concern that the do_exit() was addressing) and normal signal handling, tracer notification, and process death can happen. Paraphrasing from the original bug report: If a tracee task is in a PTRACE_EVENT_SECCOMP trap, or has been resumed after such a trap but not yet been scheduled, and another task in the thread-group calls exit_group(), then the tracee task exits without the ptracer receiving a PTRACE_EVENT_EXIT notification. Test case here: https://gist.github.com/khuey/3c43ac247c72cef8c956ca73281c9be7 The bug happens because when __seccomp_filter() detects fatal_signal_pending(), it calls do_exit() without dequeuing the fatal signal. When do_exit() sends the PTRACE_EVENT_EXIT notification and that task is descheduled, __schedule() notices that there is a fatal signal pending and changes its state from TASK_TRACED to TASK_RUNNING. That prevents the ptracer's waitpid() from returning the ptrace event. A more detailed analysis is here: https://github.com/mozilla/rr/issues/1762#issuecomment-237396255. Reported-by: Robert O'Callahan <robert@ocallahan.org> Reported-by: Kyle Huey <khuey@kylehuey.com> Tested-by: Kyle Huey <khuey@kylehuey.com> Fixes: 93e35efb8de4 ("x86/ptrace: run seccomp after ptrace") Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: James Morris <james.l.morris@oracle.com>
2016-08-10 23:28:09 +00:00
* notification may silently skip tracer notification,
* which could leave us with a potentially unmodified
* syscall that the tracer would have liked to have
* changed. Since the process is about to die, we just
* force the syscall to be skipped and let the signal
* kill the process and correctly handle any tracer exit
* notifications.
*/
if (fatal_signal_pending(current))
seccomp: Fix tracer exit notifications during fatal signals This fixes a ptrace vs fatal pending signals bug as manifested in seccomp now that seccomp was reordered to happen after ptrace. The short version is that seccomp should not attempt to call do_exit() while fatal signals are pending under a tracer. The existing code was trying to be as defensively paranoid as possible, but it now ends up confusing ptrace. Instead, the syscall can just be skipped (which solves the original concern that the do_exit() was addressing) and normal signal handling, tracer notification, and process death can happen. Paraphrasing from the original bug report: If a tracee task is in a PTRACE_EVENT_SECCOMP trap, or has been resumed after such a trap but not yet been scheduled, and another task in the thread-group calls exit_group(), then the tracee task exits without the ptracer receiving a PTRACE_EVENT_EXIT notification. Test case here: https://gist.github.com/khuey/3c43ac247c72cef8c956ca73281c9be7 The bug happens because when __seccomp_filter() detects fatal_signal_pending(), it calls do_exit() without dequeuing the fatal signal. When do_exit() sends the PTRACE_EVENT_EXIT notification and that task is descheduled, __schedule() notices that there is a fatal signal pending and changes its state from TASK_TRACED to TASK_RUNNING. That prevents the ptracer's waitpid() from returning the ptrace event. A more detailed analysis is here: https://github.com/mozilla/rr/issues/1762#issuecomment-237396255. Reported-by: Robert O'Callahan <robert@ocallahan.org> Reported-by: Kyle Huey <khuey@kylehuey.com> Tested-by: Kyle Huey <khuey@kylehuey.com> Fixes: 93e35efb8de4 ("x86/ptrace: run seccomp after ptrace") Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: James Morris <james.l.morris@oracle.com>
2016-08-10 23:28:09 +00:00
goto skip;
/* Check if the tracer forced the syscall to be skipped. */
this_syscall = syscall_get_nr(current, current_pt_regs());
if (this_syscall < 0)
goto skip;
/*
* Recheck the syscall, since it may have changed. This
* intentionally uses a NULL struct seccomp_data to force
* a reload of all registers. This does not goto skip since
* a skip would have already been reported.
*/
if (__seccomp_filter(this_syscall, NULL, true))
return -1;
return 0;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
case SECCOMP_RET_USER_NOTIF:
seccomp: add SECCOMP_USER_NOTIF_FLAG_CONTINUE This allows the seccomp notifier to continue a syscall. A positive discussion about this feature was triggered by a post to the ksummit-discuss mailing list (cf. [3]) and took place during KSummit (cf. [1]) and again at the containers/checkpoint-restore micro-conference at Linux Plumbers. Recently we landed seccomp support for SECCOMP_RET_USER_NOTIF (cf. [4]) which enables a process (watchee) to retrieve an fd for its seccomp filter. This fd can then be handed to another (usually more privileged) process (watcher). The watcher will then be able to receive seccomp messages about the syscalls having been performed by the watchee. This feature is heavily used in some userspace workloads. For example, it is currently used to intercept mknod() syscalls in user namespaces aka in containers. The mknod() syscall can be easily filtered based on dev_t. This allows us to only intercept a very specific subset of mknod() syscalls. Furthermore, mknod() is not possible in user namespaces toto coelo and so intercepting and denying syscalls that are not in the whitelist on accident is not a big deal. The watchee won't notice a difference. In contrast to mknod(), a lot of other syscall we intercept (e.g. setxattr()) cannot be easily filtered like mknod() because they have pointer arguments. Additionally, some of them might actually succeed in user namespaces (e.g. setxattr() for all "user.*" xattrs). Since we currently cannot tell seccomp to continue from a user notifier we are stuck with performing all of the syscalls in lieu of the container. This is a huge security liability since it is extremely difficult to correctly assume all of the necessary privileges of the calling task such that the syscall can be successfully emulated without escaping other additional security restrictions (think missing CAP_MKNOD for mknod(), or MS_NODEV on a filesystem etc.). This can be solved by telling seccomp to resume the syscall. One thing that came up in the discussion was the problem that another thread could change the memory after userspace has decided to let the syscall continue which is a well known TOCTOU with seccomp which is present in other ways already. The discussion showed that this feature is already very useful for any syscall without pointer arguments. For any accidentally intercepted non-pointer syscall it is safe to continue. For syscalls with pointer arguments there is a race but for any cautious userspace and the main usec cases the race doesn't matter. The notifier is intended to be used in a scenario where a more privileged watcher supervises the syscalls of lesser privileged watchee to allow it to get around kernel-enforced limitations by performing the syscall for it whenever deemed save by the watcher. Hence, if a user tricks the watcher into allowing a syscall they will either get a deny based on kernel-enforced restrictions later or they will have changed the arguments in such a way that they manage to perform a syscall with arguments that they would've been allowed to do anyway. In general, it is good to point out again, that the notifier fd was not intended to allow userspace to implement a security policy but rather to work around kernel security mechanisms in cases where the watcher knows that a given action is safe to perform. /* References */ [1]: https://linuxplumbersconf.org/event/4/contributions/560 [2]: https://linuxplumbersconf.org/event/4/contributions/477 [3]: https://lore.kernel.org/r/20190719093538.dhyopljyr5ns33qx@brauner.io [4]: commit 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> CC: Tyler Hicks <tyhicks@canonical.com> Link: https://lore.kernel.org/r/20190920083007.11475-2-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2019-09-20 08:30:05 +00:00
if (seccomp_do_user_notification(this_syscall, match, sd))
goto skip;
return 0;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
seccomp: Action to log before allowing Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing the syscall. At the implementation level, this action is identical to the existing SECCOMP_RET_ALLOW action. However, it can be very useful when initially developing a seccomp filter for an application. The developer can set the default action to be SECCOMP_RET_LOG, maybe mark any obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the application through its paces. A list of syscalls that triggered the default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and that list can be used to build the syscall whitelist. Finally, the developer can change the default action to the desired value. This provides a more friendly experience than seeing the application get killed, then updating the filter and rebuilding the app, seeing the application get killed due to a different syscall, then updating the filter and rebuilding the app, etc. The functionality is similar to what's supported by the various LSMs. SELinux has permissive mode, AppArmor has complain mode, SMACK has bring-up mode, etc. SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow while logging is slightly more restrictive than quietly allowing. Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of inspecting the audit log to verify that the syscall was logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if action == RET_LOG && RET_LOG in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:57 +00:00
case SECCOMP_RET_LOG:
seccomp_log(this_syscall, 0, action, true);
return 0;
case SECCOMP_RET_ALLOW:
/*
* Note that the "match" filter will always be NULL for
* this action since SECCOMP_RET_ALLOW is the starting
* state in seccomp_run_filters().
*/
return 0;
case SECCOMP_RET_KILL_THREAD:
case SECCOMP_RET_KILL_PROCESS:
default:
current->seccomp.mode = SECCOMP_MODE_DEAD;
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for all actions except for SECCOMP_RET_ALLOW for the given filter. SECCOMP_RET_KILL actions are always logged, when "kill" is in the actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged, regardless of this flag. This flag can be used to create noisy filters that result in all non-allowed actions to be logged. A process may have one noisy filter, which is loaded with this flag, as well as a quiet filter that's not loaded with this flag. This allows for the actions in a set of filters to be selectively conveyed to the admin. Since a system could have a large number of allocated seccomp_filter structs, struct packing was taken in consideration. On 64 bit x86, the new log member takes up one byte of an existing four byte hole in the struct. On 32 bit x86, the new log member creates a new four byte hole (unavoidable) and consumes one of those bytes. Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not capable of inspecting the audit log to verify that the actions taken in the filter were logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
seccomp_log(this_syscall, SIGSYS, action, true);
/* Dump core only if this is the last remaining thread. */
if (action != SECCOMP_RET_KILL_THREAD ||
(atomic_read(&current->signal->live) == 1)) {
/* Show the original registers in the dump. */
syscall_rollback(current, current_pt_regs());
/* Trigger a coredump with SIGSYS */
force_sig_seccomp(this_syscall, data, true);
} else {
do_exit(SIGSYS);
}
return -1; /* skip the syscall go directly to signal handling */
}
unreachable();
skip:
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for all actions except for SECCOMP_RET_ALLOW for the given filter. SECCOMP_RET_KILL actions are always logged, when "kill" is in the actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged, regardless of this flag. This flag can be used to create noisy filters that result in all non-allowed actions to be logged. A process may have one noisy filter, which is loaded with this flag, as well as a quiet filter that's not loaded with this flag. This allows for the actions in a set of filters to be selectively conveyed to the admin. Since a system could have a large number of allocated seccomp_filter structs, struct packing was taken in consideration. On 64 bit x86, the new log member takes up one byte of an existing four byte hole in the struct. On 32 bit x86, the new log member creates a new four byte hole (unavoidable) and consumes one of those bytes. Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not capable of inspecting the audit log to verify that the actions taken in the filter were logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:56 +00:00
seccomp_log(this_syscall, 0, action, match ? match->log : false);
return -1;
}
#else
static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd,
const bool recheck_after_trace)
{
BUG();
return -1;
}
#endif
int __secure_computing(const struct seccomp_data *sd)
{
int mode = current->seccomp.mode;
int this_syscall;
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:45:50 +00:00
if (IS_ENABLED(CONFIG_CHECKPOINT_RESTORE) &&
seccomp: add ptrace options for suspend/resume This patch is the first step in enabling checkpoint/restore of processes with seccomp enabled. One of the things CRIU does while dumping tasks is inject code into them via ptrace to collect information that is only available to the process itself. However, if we are in a seccomp mode where these processes are prohibited from making these syscalls, then what CRIU does kills the task. This patch adds a new ptrace option, PTRACE_O_SUSPEND_SECCOMP, that enables a task from the init user namespace which has CAP_SYS_ADMIN and no seccomp filters to disable (and re-enable) seccomp filters for another task so that they can be successfully dumped (and restored). We restrict the set of processes that can disable seccomp through ptrace because although today ptrace can be used to bypass seccomp, there is some discussion of closing this loophole in the future and we would like this patch to not depend on that behavior and be future proofed for when it is removed. Note that seccomp can be suspended before any filters are actually installed; this behavior is useful on criu restore, so that we can suspend seccomp, restore the filters, unmap our restore code from the restored process' address space, and then resume the task by detaching and have the filters resumed as well. v2 changes: * require that the tracer have no seccomp filters installed * drop TIF_NOTSC manipulation from the patch * change from ptrace command to a ptrace option and use this ptrace option as the flag to check. This means that as soon as the tracer detaches/dies, seccomp is re-enabled and as a corrollary that one can not disable seccomp across PTRACE_ATTACHs. v3 changes: * get rid of various #ifdefs everywhere * report more sensible errors when PTRACE_O_SUSPEND_SECCOMP is incorrectly used v4 changes: * get rid of may_suspend_seccomp() in favor of a capable() check in ptrace directly v5 changes: * check that seccomp is not enabled (or suspended) on the tracer Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> CC: Will Drewry <wad@chromium.org> CC: Roland McGrath <roland@hack.frob.com> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Andy Lutomirski <luto@amacapital.net> [kees: access seccomp.mode through seccomp_mode() instead] Signed-off-by: Kees Cook <keescook@chromium.org>
2015-06-13 15:02:48 +00:00
unlikely(current->ptrace & PT_SUSPEND_SECCOMP))
return 0;
this_syscall = sd ? sd->nr :
syscall_get_nr(current, current_pt_regs());
seccomp: add ptrace options for suspend/resume This patch is the first step in enabling checkpoint/restore of processes with seccomp enabled. One of the things CRIU does while dumping tasks is inject code into them via ptrace to collect information that is only available to the process itself. However, if we are in a seccomp mode where these processes are prohibited from making these syscalls, then what CRIU does kills the task. This patch adds a new ptrace option, PTRACE_O_SUSPEND_SECCOMP, that enables a task from the init user namespace which has CAP_SYS_ADMIN and no seccomp filters to disable (and re-enable) seccomp filters for another task so that they can be successfully dumped (and restored). We restrict the set of processes that can disable seccomp through ptrace because although today ptrace can be used to bypass seccomp, there is some discussion of closing this loophole in the future and we would like this patch to not depend on that behavior and be future proofed for when it is removed. Note that seccomp can be suspended before any filters are actually installed; this behavior is useful on criu restore, so that we can suspend seccomp, restore the filters, unmap our restore code from the restored process' address space, and then resume the task by detaching and have the filters resumed as well. v2 changes: * require that the tracer have no seccomp filters installed * drop TIF_NOTSC manipulation from the patch * change from ptrace command to a ptrace option and use this ptrace option as the flag to check. This means that as soon as the tracer detaches/dies, seccomp is re-enabled and as a corrollary that one can not disable seccomp across PTRACE_ATTACHs. v3 changes: * get rid of various #ifdefs everywhere * report more sensible errors when PTRACE_O_SUSPEND_SECCOMP is incorrectly used v4 changes: * get rid of may_suspend_seccomp() in favor of a capable() check in ptrace directly v5 changes: * check that seccomp is not enabled (or suspended) on the tracer Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> CC: Will Drewry <wad@chromium.org> CC: Roland McGrath <roland@hack.frob.com> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Andy Lutomirski <luto@amacapital.net> [kees: access seccomp.mode through seccomp_mode() instead] Signed-off-by: Kees Cook <keescook@chromium.org>
2015-06-13 15:02:48 +00:00
switch (mode) {
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
case SECCOMP_MODE_STRICT:
__secure_computing_strict(this_syscall); /* may call do_exit */
return 0;
case SECCOMP_MODE_FILTER:
return __seccomp_filter(this_syscall, sd, false);
/* Surviving SECCOMP_RET_KILL_* must be proactively impossible. */
case SECCOMP_MODE_DEAD:
WARN_ON_ONCE(1);
do_exit(SIGKILL);
return -1;
default:
BUG();
}
}
#endif /* CONFIG_HAVE_ARCH_SECCOMP_FILTER */
long prctl_get_seccomp(void)
{
return current->seccomp.mode;
}
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
/**
* seccomp_set_mode_strict: internal function for setting strict seccomp
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
*
* Once current->seccomp.mode is non-zero, it may not be changed.
*
* Returns 0 on success or -EINVAL on failure.
*/
static long seccomp_set_mode_strict(void)
{
const unsigned long seccomp_mode = SECCOMP_MODE_STRICT;
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
long ret = -EINVAL;
spin_lock_irq(&current->sighand->siglock);
if (!seccomp_may_assign_mode(seccomp_mode))
goto out;
#ifdef TIF_NOTSC
disable_TSC();
#endif
seccomp_assign_mode(current, seccomp_mode, 0);
ret = 0;
out:
spin_unlock_irq(&current->sighand->siglock);
return ret;
}
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
#ifdef CONFIG_SECCOMP_FILTER
static void seccomp_notify_free(struct seccomp_filter *filter)
{
kfree(filter->notif);
filter->notif = NULL;
}
static void seccomp_notify_detach(struct seccomp_filter *filter)
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
{
struct seccomp_knotif *knotif;
if (!filter)
return;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
mutex_lock(&filter->notify_lock);
/*
* If this file is being closed because e.g. the task who owned it
* died, let's wake everyone up who was waiting on us.
*/
list_for_each_entry(knotif, &filter->notif->notifications, list) {
if (knotif->state == SECCOMP_NOTIFY_REPLIED)
continue;
knotif->state = SECCOMP_NOTIFY_REPLIED;
knotif->error = -ENOSYS;
knotif->val = 0;
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
/*
* We do not need to wake up any pending addfd messages, as
* the notifier will do that for us, as this just looks
* like a standard reply.
*/
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
complete(&knotif->ready);
}
seccomp_notify_free(filter);
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
mutex_unlock(&filter->notify_lock);
}
static int seccomp_notify_release(struct inode *inode, struct file *file)
{
struct seccomp_filter *filter = file->private_data;
seccomp_notify_detach(filter);
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
__put_seccomp_filter(filter);
return 0;
}
/* must be called with notif_lock held */
static inline struct seccomp_knotif *
find_notification(struct seccomp_filter *filter, u64 id)
{
struct seccomp_knotif *cur;
lockdep_assert_held(&filter->notify_lock);
list_for_each_entry(cur, &filter->notif->notifications, list) {
if (cur->id == id)
return cur;
}
return NULL;
}
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
static long seccomp_notify_recv(struct seccomp_filter *filter,
void __user *buf)
{
struct seccomp_knotif *knotif = NULL, *cur;
struct seccomp_notif unotif;
ssize_t ret;
/* Verify that we're not given garbage to keep struct extensible. */
ret = check_zeroed_user(buf, sizeof(unotif));
if (ret < 0)
return ret;
if (!ret)
return -EINVAL;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
memset(&unotif, 0, sizeof(unotif));
ret = down_interruptible(&filter->notif->request);
if (ret < 0)
return ret;
mutex_lock(&filter->notify_lock);
list_for_each_entry(cur, &filter->notif->notifications, list) {
if (cur->state == SECCOMP_NOTIFY_INIT) {
knotif = cur;
break;
}
}
/*
* If we didn't find a notification, it could be that the task was
* interrupted by a fatal signal between the time we were woken and
* when we were able to acquire the rw lock.
*/
if (!knotif) {
ret = -ENOENT;
goto out;
}
unotif.id = knotif->id;
unotif.pid = task_pid_vnr(knotif->task);
unotif.data = *(knotif->data);
knotif->state = SECCOMP_NOTIFY_SENT;
wake_up_poll(&filter->wqh, EPOLLOUT | EPOLLWRNORM);
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
ret = 0;
out:
mutex_unlock(&filter->notify_lock);
if (ret == 0 && copy_to_user(buf, &unotif, sizeof(unotif))) {
ret = -EFAULT;
/*
* Userspace screwed up. To make sure that we keep this
* notification alive, let's reset it back to INIT. It
* may have died when we released the lock, so we need to make
* sure it's still around.
*/
mutex_lock(&filter->notify_lock);
knotif = find_notification(filter, unotif.id);
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
if (knotif) {
seccomp: Add wait_killable semantic to seccomp user notifier This introduces a per-filter flag (SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV) that makes it so that when notifications are received by the supervisor the notifying process will transition to wait killable semantics. Although wait killable isn't a set of semantics formally exposed to userspace, the concept is searchable. If the notifying process is signaled prior to the notification being received by the userspace agent, it will be handled as normal. One quirk about how this is handled is that the notifying process only switches to TASK_KILLABLE if it receives a wakeup from either an addfd or a signal. This is to avoid an unnecessary wakeup of the notifying task. The reasons behind switching into wait_killable only after userspace receives the notification are: * Avoiding unncessary work - Often, workloads will perform work that they may abort (request racing comes to mind). This allows for syscalls to be aborted safely prior to the notification being received by the supervisor. In this, the supervisor doesn't end up doing work that the workload does not want to complete anyways. * Avoiding side effects - We don't want the syscall to be interruptible once the supervisor starts doing work because it may not be trivial to reverse the operation. For example, unmounting a file system may take a long time, and it's hard to rollback, or treat that as reentrant. * Avoid breaking runtimes - Various runtimes do not GC when they are during a syscall (or while running native code that subsequently calls a syscall). If many notifications are blocked, and not picked up by the supervisor, this can get the application into a bad state. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220503080958.20220-2-sargun@sargun.me
2022-05-03 08:09:56 +00:00
/* Reset the process to make sure it's not stuck */
if (should_sleep_killable(filter, knotif))
complete(&knotif->ready);
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
knotif->state = SECCOMP_NOTIFY_INIT;
up(&filter->notif->request);
}
mutex_unlock(&filter->notify_lock);
}
return ret;
}
static long seccomp_notify_send(struct seccomp_filter *filter,
void __user *buf)
{
struct seccomp_notif_resp resp = {};
struct seccomp_knotif *knotif;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
long ret;
if (copy_from_user(&resp, buf, sizeof(resp)))
return -EFAULT;
seccomp: add SECCOMP_USER_NOTIF_FLAG_CONTINUE This allows the seccomp notifier to continue a syscall. A positive discussion about this feature was triggered by a post to the ksummit-discuss mailing list (cf. [3]) and took place during KSummit (cf. [1]) and again at the containers/checkpoint-restore micro-conference at Linux Plumbers. Recently we landed seccomp support for SECCOMP_RET_USER_NOTIF (cf. [4]) which enables a process (watchee) to retrieve an fd for its seccomp filter. This fd can then be handed to another (usually more privileged) process (watcher). The watcher will then be able to receive seccomp messages about the syscalls having been performed by the watchee. This feature is heavily used in some userspace workloads. For example, it is currently used to intercept mknod() syscalls in user namespaces aka in containers. The mknod() syscall can be easily filtered based on dev_t. This allows us to only intercept a very specific subset of mknod() syscalls. Furthermore, mknod() is not possible in user namespaces toto coelo and so intercepting and denying syscalls that are not in the whitelist on accident is not a big deal. The watchee won't notice a difference. In contrast to mknod(), a lot of other syscall we intercept (e.g. setxattr()) cannot be easily filtered like mknod() because they have pointer arguments. Additionally, some of them might actually succeed in user namespaces (e.g. setxattr() for all "user.*" xattrs). Since we currently cannot tell seccomp to continue from a user notifier we are stuck with performing all of the syscalls in lieu of the container. This is a huge security liability since it is extremely difficult to correctly assume all of the necessary privileges of the calling task such that the syscall can be successfully emulated without escaping other additional security restrictions (think missing CAP_MKNOD for mknod(), or MS_NODEV on a filesystem etc.). This can be solved by telling seccomp to resume the syscall. One thing that came up in the discussion was the problem that another thread could change the memory after userspace has decided to let the syscall continue which is a well known TOCTOU with seccomp which is present in other ways already. The discussion showed that this feature is already very useful for any syscall without pointer arguments. For any accidentally intercepted non-pointer syscall it is safe to continue. For syscalls with pointer arguments there is a race but for any cautious userspace and the main usec cases the race doesn't matter. The notifier is intended to be used in a scenario where a more privileged watcher supervises the syscalls of lesser privileged watchee to allow it to get around kernel-enforced limitations by performing the syscall for it whenever deemed save by the watcher. Hence, if a user tricks the watcher into allowing a syscall they will either get a deny based on kernel-enforced restrictions later or they will have changed the arguments in such a way that they manage to perform a syscall with arguments that they would've been allowed to do anyway. In general, it is good to point out again, that the notifier fd was not intended to allow userspace to implement a security policy but rather to work around kernel security mechanisms in cases where the watcher knows that a given action is safe to perform. /* References */ [1]: https://linuxplumbersconf.org/event/4/contributions/560 [2]: https://linuxplumbersconf.org/event/4/contributions/477 [3]: https://lore.kernel.org/r/20190719093538.dhyopljyr5ns33qx@brauner.io [4]: commit 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> CC: Tyler Hicks <tyhicks@canonical.com> Link: https://lore.kernel.org/r/20190920083007.11475-2-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2019-09-20 08:30:05 +00:00
if (resp.flags & ~SECCOMP_USER_NOTIF_FLAG_CONTINUE)
return -EINVAL;
if ((resp.flags & SECCOMP_USER_NOTIF_FLAG_CONTINUE) &&
(resp.error || resp.val))
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
return -EINVAL;
ret = mutex_lock_interruptible(&filter->notify_lock);
if (ret < 0)
return ret;
knotif = find_notification(filter, resp.id);
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
if (!knotif) {
ret = -ENOENT;
goto out;
}
/* Allow exactly one reply. */
if (knotif->state != SECCOMP_NOTIFY_SENT) {
ret = -EINPROGRESS;
goto out;
}
ret = 0;
knotif->state = SECCOMP_NOTIFY_REPLIED;
knotif->error = resp.error;
knotif->val = resp.val;
seccomp: add SECCOMP_USER_NOTIF_FLAG_CONTINUE This allows the seccomp notifier to continue a syscall. A positive discussion about this feature was triggered by a post to the ksummit-discuss mailing list (cf. [3]) and took place during KSummit (cf. [1]) and again at the containers/checkpoint-restore micro-conference at Linux Plumbers. Recently we landed seccomp support for SECCOMP_RET_USER_NOTIF (cf. [4]) which enables a process (watchee) to retrieve an fd for its seccomp filter. This fd can then be handed to another (usually more privileged) process (watcher). The watcher will then be able to receive seccomp messages about the syscalls having been performed by the watchee. This feature is heavily used in some userspace workloads. For example, it is currently used to intercept mknod() syscalls in user namespaces aka in containers. The mknod() syscall can be easily filtered based on dev_t. This allows us to only intercept a very specific subset of mknod() syscalls. Furthermore, mknod() is not possible in user namespaces toto coelo and so intercepting and denying syscalls that are not in the whitelist on accident is not a big deal. The watchee won't notice a difference. In contrast to mknod(), a lot of other syscall we intercept (e.g. setxattr()) cannot be easily filtered like mknod() because they have pointer arguments. Additionally, some of them might actually succeed in user namespaces (e.g. setxattr() for all "user.*" xattrs). Since we currently cannot tell seccomp to continue from a user notifier we are stuck with performing all of the syscalls in lieu of the container. This is a huge security liability since it is extremely difficult to correctly assume all of the necessary privileges of the calling task such that the syscall can be successfully emulated without escaping other additional security restrictions (think missing CAP_MKNOD for mknod(), or MS_NODEV on a filesystem etc.). This can be solved by telling seccomp to resume the syscall. One thing that came up in the discussion was the problem that another thread could change the memory after userspace has decided to let the syscall continue which is a well known TOCTOU with seccomp which is present in other ways already. The discussion showed that this feature is already very useful for any syscall without pointer arguments. For any accidentally intercepted non-pointer syscall it is safe to continue. For syscalls with pointer arguments there is a race but for any cautious userspace and the main usec cases the race doesn't matter. The notifier is intended to be used in a scenario where a more privileged watcher supervises the syscalls of lesser privileged watchee to allow it to get around kernel-enforced limitations by performing the syscall for it whenever deemed save by the watcher. Hence, if a user tricks the watcher into allowing a syscall they will either get a deny based on kernel-enforced restrictions later or they will have changed the arguments in such a way that they manage to perform a syscall with arguments that they would've been allowed to do anyway. In general, it is good to point out again, that the notifier fd was not intended to allow userspace to implement a security policy but rather to work around kernel security mechanisms in cases where the watcher knows that a given action is safe to perform. /* References */ [1]: https://linuxplumbersconf.org/event/4/contributions/560 [2]: https://linuxplumbersconf.org/event/4/contributions/477 [3]: https://lore.kernel.org/r/20190719093538.dhyopljyr5ns33qx@brauner.io [4]: commit 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> CC: Tyler Hicks <tyhicks@canonical.com> Link: https://lore.kernel.org/r/20190920083007.11475-2-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2019-09-20 08:30:05 +00:00
knotif->flags = resp.flags;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
complete(&knotif->ready);
out:
mutex_unlock(&filter->notify_lock);
return ret;
}
static long seccomp_notify_id_valid(struct seccomp_filter *filter,
void __user *buf)
{
struct seccomp_knotif *knotif;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
u64 id;
long ret;
if (copy_from_user(&id, buf, sizeof(id)))
return -EFAULT;
ret = mutex_lock_interruptible(&filter->notify_lock);
if (ret < 0)
return ret;
knotif = find_notification(filter, id);
if (knotif && knotif->state == SECCOMP_NOTIFY_SENT)
ret = 0;
else
ret = -ENOENT;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
mutex_unlock(&filter->notify_lock);
return ret;
}
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
static long seccomp_notify_addfd(struct seccomp_filter *filter,
struct seccomp_notif_addfd __user *uaddfd,
unsigned int size)
{
struct seccomp_notif_addfd addfd;
struct seccomp_knotif *knotif;
struct seccomp_kaddfd kaddfd;
int ret;
BUILD_BUG_ON(sizeof(addfd) < SECCOMP_NOTIFY_ADDFD_SIZE_VER0);
BUILD_BUG_ON(sizeof(addfd) != SECCOMP_NOTIFY_ADDFD_SIZE_LATEST);
if (size < SECCOMP_NOTIFY_ADDFD_SIZE_VER0 || size >= PAGE_SIZE)
return -EINVAL;
ret = copy_struct_from_user(&addfd, sizeof(addfd), uaddfd, size);
if (ret)
return ret;
if (addfd.newfd_flags & ~O_CLOEXEC)
return -EINVAL;
seccomp: Support atomic "addfd + send reply" Alban Crequy reported a race condition userspace faces when we want to add some fds and make the syscall return them[1] using seccomp notify. The problem is that currently two different ioctl() calls are needed by the process handling the syscalls (agent) for another userspace process (target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible for the agent to do the first ioctl to add a file descriptor but the target is interrupted (EINTR) before the agent does the second ioctl() call. This patch adds a flag to the ADDFD ioctl() so it adds the fd and returns that value atomically to the target program, as suggested by Kees Cook[2]. This is done by simply allowing seccomp_do_user_notification() to add the fd and return it in this case. Therefore, in this case the target wakes up from the wait in seccomp_do_user_notification() either to interrupt the syscall or to add the fd and return it. This "allocate an fd and return" functionality is useful for syscalls that return a file descriptor only, like connect(2). Other syscalls that return a file descriptor but not as return value (or return more than one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not work with this flag. This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's return value, nor error can be set by the user. Upon successful invocation of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND flag, the notifying process's errno will be 0, and the return value will be the file descriptor number that was installed. [1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/ Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io> Signed-off-by: Sargun Dhillon <sargun@sargun.me> Acked-by: Tycho Andersen <tycho@tycho.pizza> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
if (addfd.flags & ~(SECCOMP_ADDFD_FLAG_SETFD | SECCOMP_ADDFD_FLAG_SEND))
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
return -EINVAL;
if (addfd.newfd && !(addfd.flags & SECCOMP_ADDFD_FLAG_SETFD))
return -EINVAL;
kaddfd.file = fget(addfd.srcfd);
if (!kaddfd.file)
return -EBADF;
seccomp: Support atomic "addfd + send reply" Alban Crequy reported a race condition userspace faces when we want to add some fds and make the syscall return them[1] using seccomp notify. The problem is that currently two different ioctl() calls are needed by the process handling the syscalls (agent) for another userspace process (target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible for the agent to do the first ioctl to add a file descriptor but the target is interrupted (EINTR) before the agent does the second ioctl() call. This patch adds a flag to the ADDFD ioctl() so it adds the fd and returns that value atomically to the target program, as suggested by Kees Cook[2]. This is done by simply allowing seccomp_do_user_notification() to add the fd and return it in this case. Therefore, in this case the target wakes up from the wait in seccomp_do_user_notification() either to interrupt the syscall or to add the fd and return it. This "allocate an fd and return" functionality is useful for syscalls that return a file descriptor only, like connect(2). Other syscalls that return a file descriptor but not as return value (or return more than one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not work with this flag. This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's return value, nor error can be set by the user. Upon successful invocation of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND flag, the notifying process's errno will be 0, and the return value will be the file descriptor number that was installed. [1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/ Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io> Signed-off-by: Sargun Dhillon <sargun@sargun.me> Acked-by: Tycho Andersen <tycho@tycho.pizza> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
kaddfd.ioctl_flags = addfd.flags;
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
kaddfd.flags = addfd.newfd_flags;
kaddfd.setfd = addfd.flags & SECCOMP_ADDFD_FLAG_SETFD;
kaddfd.fd = addfd.newfd;
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
init_completion(&kaddfd.completion);
ret = mutex_lock_interruptible(&filter->notify_lock);
if (ret < 0)
goto out;
knotif = find_notification(filter, addfd.id);
if (!knotif) {
ret = -ENOENT;
goto out_unlock;
}
/*
* We do not want to allow for FD injection to occur before the
* notification has been picked up by a userspace handler, or after
* the notification has been replied to.
*/
if (knotif->state != SECCOMP_NOTIFY_SENT) {
ret = -EINPROGRESS;
goto out_unlock;
}
seccomp: Support atomic "addfd + send reply" Alban Crequy reported a race condition userspace faces when we want to add some fds and make the syscall return them[1] using seccomp notify. The problem is that currently two different ioctl() calls are needed by the process handling the syscalls (agent) for another userspace process (target): SECCOMP_IOCTL_NOTIF_ADDFD to allocate the fd and SECCOMP_IOCTL_NOTIF_SEND to return that value. Therefore, it is possible for the agent to do the first ioctl to add a file descriptor but the target is interrupted (EINTR) before the agent does the second ioctl() call. This patch adds a flag to the ADDFD ioctl() so it adds the fd and returns that value atomically to the target program, as suggested by Kees Cook[2]. This is done by simply allowing seccomp_do_user_notification() to add the fd and return it in this case. Therefore, in this case the target wakes up from the wait in seccomp_do_user_notification() either to interrupt the syscall or to add the fd and return it. This "allocate an fd and return" functionality is useful for syscalls that return a file descriptor only, like connect(2). Other syscalls that return a file descriptor but not as return value (or return more than one fd), like socketpair(), pipe(), recvmsg with SCM_RIGHTs, will not work with this flag. This effectively combines SECCOMP_IOCTL_NOTIF_ADDFD and SECCOMP_IOCTL_NOTIF_SEND into an atomic opteration. The notification's return value, nor error can be set by the user. Upon successful invocation of the SECCOMP_IOCTL_NOTIF_ADDFD ioctl with the SECCOMP_ADDFD_FLAG_SEND flag, the notifying process's errno will be 0, and the return value will be the file descriptor number that was installed. [1]: https://lore.kernel.org/lkml/CADZs7q4sw71iNHmV8EOOXhUKJMORPzF7thraxZYddTZsxta-KQ@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/202012011322.26DCBC64F2@keescook/ Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io> Signed-off-by: Sargun Dhillon <sargun@sargun.me> Acked-by: Tycho Andersen <tycho@tycho.pizza> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210517193908.3113-4-sargun@sargun.me
2021-05-17 19:39:07 +00:00
if (addfd.flags & SECCOMP_ADDFD_FLAG_SEND) {
/*
* Disallow queuing an atomic addfd + send reply while there are
* some addfd requests still to process.
*
* There is no clear reason to support it and allows us to keep
* the loop on the other side straight-forward.
*/
if (!list_empty(&knotif->addfd)) {
ret = -EBUSY;
goto out_unlock;
}
/* Allow exactly only one reply */
knotif->state = SECCOMP_NOTIFY_REPLIED;
}
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
list_add(&kaddfd.list, &knotif->addfd);
complete(&knotif->ready);
mutex_unlock(&filter->notify_lock);
/* Now we wait for it to be processed or be interrupted */
ret = wait_for_completion_interruptible(&kaddfd.completion);
if (ret == 0) {
/*
* We had a successful completion. The other side has already
* removed us from the addfd queue, and
* wait_for_completion_interruptible has a memory barrier upon
* success that lets us read this value directly without
* locking.
*/
ret = kaddfd.ret;
goto out;
}
mutex_lock(&filter->notify_lock);
/*
* Even though we were woken up by a signal and not a successful
* completion, a completion may have happened in the mean time.
*
* We need to check again if the addfd request has been handled,
* and if not, we will remove it from the queue.
*/
if (list_empty(&kaddfd.list))
ret = kaddfd.ret;
else
list_del(&kaddfd.list);
out_unlock:
mutex_unlock(&filter->notify_lock);
out:
fput(kaddfd.file);
return ret;
}
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
static long seccomp_notify_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
struct seccomp_filter *filter = file->private_data;
void __user *buf = (void __user *)arg;
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
/* Fixed-size ioctls */
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
switch (cmd) {
case SECCOMP_IOCTL_NOTIF_RECV:
return seccomp_notify_recv(filter, buf);
case SECCOMP_IOCTL_NOTIF_SEND:
return seccomp_notify_send(filter, buf);
case SECCOMP_IOCTL_NOTIF_ID_VALID_WRONG_DIR:
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
case SECCOMP_IOCTL_NOTIF_ID_VALID:
return seccomp_notify_id_valid(filter, buf);
seccomp: Introduce addfd ioctl to seccomp user notifier The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over an fd. It is often used in settings where a supervising task emulates syscalls on behalf of a supervised task in userspace, either to further restrict the supervisee's syscall abilities or to circumvent kernel enforced restrictions the supervisor deems safe to lift (e.g. actually performing a mount(2) for an unprivileged container). While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall, only a certain subset of syscalls could be correctly emulated. Over the last few development cycles, the set of syscalls which can't be emulated has been reduced due to the addition of pidfd_getfd(2). With this we are now able to, for example, intercept syscalls that require the supervisor to operate on file descriptors of the supervisee such as connect(2). However, syscalls that cause new file descriptors to be installed can not currently be correctly emulated since there is no way for the supervisor to inject file descriptors into the supervisee. This patch adds a new addfd ioctl to remove this restriction by allowing the supervisor to install file descriptors into the intercepted task. By implementing this feature via seccomp the supervisor effectively instructs the supervisee to install a set of file descriptors into its own file descriptor table during the intercepted syscall. This way it is possible to intercept syscalls such as open() or accept(), and install (or replace, like dup2(2)) the supervisor's resulting fd into the supervisee. One replacement use-case would be to redirect the stdout and stderr of a supervisee into log file descriptors opened by the supervisor. The ioctl handling is based on the discussions[1] of how Extensible Arguments should interact with ioctls. Instead of building size into the addfd structure, make it a function of the ioctl command (which is how sizes are normally passed to ioctls). To support forward and backward compatibility, just mask out the direction and size, and match everything. The size (and any future direction) checks are done along with copy_struct_from_user() logic. As a note, the seccomp_notif_addfd structure is laid out based on 8-byte alignment without requiring packing as there have been packing issues with uapi highlighted before[2][3]. Although we could overload the newfd field and use -1 to indicate that it is not to be used, doing so requires changing the size of the fd field, and introduces struct packing complexity. [1]: https://lore.kernel.org/lkml/87o8w9bcaf.fsf@mid.deneb.enyo.de/ [2]: https://lore.kernel.org/lkml/a328b91d-fd8f-4f27-b3c2-91a9c45f18c0@rasmusvillemoes.dk/ [3]: https://lore.kernel.org/lkml/20200612104629.GA15814@ircssh-2.c.rugged-nimbus-611.internal Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Jann Horn <jannh@google.com> Cc: Robert Sesek <rsesek@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-api@vger.kernel.org Suggested-by: Matt Denton <mpdenton@google.com> Link: https://lore.kernel.org/r/20200603011044.7972-4-sargun@sargun.me Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 01:10:43 +00:00
}
/* Extensible Argument ioctls */
#define EA_IOCTL(cmd) ((cmd) & ~(IOC_INOUT | IOCSIZE_MASK))
switch (EA_IOCTL(cmd)) {
case EA_IOCTL(SECCOMP_IOCTL_NOTIF_ADDFD):
return seccomp_notify_addfd(filter, buf, _IOC_SIZE(cmd));
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
default:
return -EINVAL;
}
}
static __poll_t seccomp_notify_poll(struct file *file,
struct poll_table_struct *poll_tab)
{
struct seccomp_filter *filter = file->private_data;
__poll_t ret = 0;
struct seccomp_knotif *cur;
poll_wait(file, &filter->wqh, poll_tab);
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
if (mutex_lock_interruptible(&filter->notify_lock) < 0)
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
return EPOLLERR;
list_for_each_entry(cur, &filter->notif->notifications, list) {
if (cur->state == SECCOMP_NOTIFY_INIT)
ret |= EPOLLIN | EPOLLRDNORM;
if (cur->state == SECCOMP_NOTIFY_SENT)
ret |= EPOLLOUT | EPOLLWRNORM;
if ((ret & EPOLLIN) && (ret & EPOLLOUT))
break;
}
mutex_unlock(&filter->notify_lock);
seccomp: notify about unused filter We've been making heavy use of the seccomp notifier to intercept and handle certain syscalls for containers. This patch allows a syscall supervisor listening on a given notifier to be notified when a seccomp filter has become unused. A container is often managed by a singleton supervisor process the so-called "monitor". This monitor process has an event loop which has various event handlers registered. If the user specified a seccomp profile that included a notifier for various syscalls then we also register a seccomp notify even handler. For any container using a separate pid namespace the lifecycle of the seccomp notifier is bound to the init process of the pid namespace, i.e. when the init process exits the filter must be unused. If a new process attaches to a container we force it to assume a seccomp profile. This can either be the same seccomp profile as the container was started with or a modified one. If the attaching process makes use of the seccomp notifier we will register a new seccomp notifier handler in the monitor's event loop. However, when the attaching process exits we can't simply delete the handler since other child processes could've been created (daemons spawned etc.) that have inherited the seccomp filter and so we need to keep the seccomp notifier fd alive in the event loop. But this is problematic since we don't get a notification when the seccomp filter has become unused and so we currently never remove the seccomp notifier fd from the event loop and just keep accumulating fds in the event loop. We've had this issue for a while but it has recently become more pressing as more and larger users make use of this. To fix this, we introduce a new "users" reference counter that tracks any tasks and dependent filters making use of a filter. When a notifier is registered waiting tasks will be notified that the filter is now empty by receiving a (E)POLLHUP event. The concept in this patch introduces is the same as for signal_struct, i.e. reference counting for life-cycle management is decoupled from reference counting taks using the object. There's probably some trickery possible but the second counter is just the correct way of doing this IMHO and has precedence. Cc: Tycho Andersen <tycho@tycho.ws> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Denton <mpdenton@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Jann Horn <jannh@google.com> Cc: Chris Palmer <palmer@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Robert Sesek <rsesek@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Linux Containers <containers@lists.linux-foundation.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200531115031.391515-3-christian.brauner@ubuntu.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-31 11:50:30 +00:00
if (refcount_read(&filter->users) == 0)
ret |= EPOLLHUP;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
return ret;
}
static const struct file_operations seccomp_notify_ops = {
.poll = seccomp_notify_poll,
.release = seccomp_notify_release,
.unlocked_ioctl = seccomp_notify_ioctl,
.compat_ioctl = seccomp_notify_ioctl,
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
};
static struct file *init_listener(struct seccomp_filter *filter)
{
struct file *ret;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
ret = ERR_PTR(-ENOMEM);
filter->notif = kzalloc(sizeof(*(filter->notif)), GFP_KERNEL);
if (!filter->notif)
goto out;
sema_init(&filter->notif->request, 0);
filter->notif->next_id = get_random_u64();
INIT_LIST_HEAD(&filter->notif->notifications);
ret = anon_inode_getfile("seccomp notify", &seccomp_notify_ops,
filter, O_RDWR);
if (IS_ERR(ret))
goto out_notif;
/* The file has a reference to it now */
__get_seccomp_filter(filter);
out_notif:
if (IS_ERR(ret))
seccomp_notify_free(filter);
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
out:
return ret;
}
/*
* Does @new_child have a listener while an ancestor also has a listener?
* If so, we'll want to reject this filter.
* This only has to be tested for the current process, even in the TSYNC case,
* because TSYNC installs @child with the same parent on all threads.
* Note that @new_child is not hooked up to its parent at this point yet, so
* we use current->seccomp.filter.
*/
static bool has_duplicate_listener(struct seccomp_filter *new_child)
{
struct seccomp_filter *cur;
/* must be protected against concurrent TSYNC */
lockdep_assert_held(&current->sighand->siglock);
if (!new_child->notif)
return false;
for (cur = current->seccomp.filter; cur; cur = cur->prev) {
if (cur->notif)
return true;
}
return false;
}
/**
* seccomp_set_mode_filter: internal function for setting seccomp filter
* @flags: flags to change filter behavior
* @filter: struct sock_fprog containing filter
*
* This function may be called repeatedly to install additional filters.
* Every filter successfully installed will be evaluated (in reverse order)
* for each system call the task makes.
*
* Once current->seccomp.mode is non-zero, it may not be changed.
*
* Returns 0 on success or -EINVAL on failure.
*/
static long seccomp_set_mode_filter(unsigned int flags,
const char __user *filter)
{
const unsigned long seccomp_mode = SECCOMP_MODE_FILTER;
struct seccomp_filter *prepared = NULL;
long ret = -EINVAL;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
int listener = -1;
struct file *listener_f = NULL;
/* Validate flags. */
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
if (flags & ~SECCOMP_FILTER_FLAG_MASK)
return -EINVAL;
seccomp: Make NEW_LISTENER and TSYNC flags exclusive As the comment notes, the return codes for TSYNC and NEW_LISTENER conflict, because they both return positive values, one in the case of success and one in the case of error. So, let's disallow both of these flags together. While this is technically a userspace break, all the users I know of are still waiting on me to land this feature in libseccomp, so I think it'll be safe. Also, at present my use case doesn't require TSYNC at all, so this isn't a big deal to disallow. If someone wanted to support this, a path forward would be to add a new flag like TSYNC_AND_LISTENER_YES_I_UNDERSTAND_THAT_TSYNC_WILL_JUST_RETURN_EAGAIN, but the use cases are so different I don't see it really happening. Finally, it's worth noting that this does actually fix a UAF issue: at the end of seccomp_set_mode_filter(), we have: if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) { if (ret < 0) { listener_f->private_data = NULL; fput(listener_f); put_unused_fd(listener); } else { fd_install(listener, listener_f); ret = listener; } } out_free: seccomp_filter_free(prepared); But if ret > 0 because TSYNC raced, we'll install the listener fd and then free the filter out from underneath it, causing a UAF when the task closes it or dies. This patch also switches the condition to be simply if (ret), so that if someone does add the flag mentioned above, they won't have to remember to fix this too. Reported-by: syzbot+b562969adb2e04af3442@syzkaller.appspotmail.com Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") CC: stable@vger.kernel.org # v5.0+ Signed-off-by: Tycho Andersen <tycho@tycho.ws> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: James Morris <jamorris@linux.microsoft.com>
2019-03-06 20:14:13 +00:00
/*
* In the successful case, NEW_LISTENER returns the new listener fd.
* But in the failure case, TSYNC returns the thread that died. If you
* combine these two flags, there's no way to tell whether something
* succeeded or failed. So, let's disallow this combination if the user
* has not explicitly requested no errors from TSYNC.
seccomp: Make NEW_LISTENER and TSYNC flags exclusive As the comment notes, the return codes for TSYNC and NEW_LISTENER conflict, because they both return positive values, one in the case of success and one in the case of error. So, let's disallow both of these flags together. While this is technically a userspace break, all the users I know of are still waiting on me to land this feature in libseccomp, so I think it'll be safe. Also, at present my use case doesn't require TSYNC at all, so this isn't a big deal to disallow. If someone wanted to support this, a path forward would be to add a new flag like TSYNC_AND_LISTENER_YES_I_UNDERSTAND_THAT_TSYNC_WILL_JUST_RETURN_EAGAIN, but the use cases are so different I don't see it really happening. Finally, it's worth noting that this does actually fix a UAF issue: at the end of seccomp_set_mode_filter(), we have: if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) { if (ret < 0) { listener_f->private_data = NULL; fput(listener_f); put_unused_fd(listener); } else { fd_install(listener, listener_f); ret = listener; } } out_free: seccomp_filter_free(prepared); But if ret > 0 because TSYNC raced, we'll install the listener fd and then free the filter out from underneath it, causing a UAF when the task closes it or dies. This patch also switches the condition to be simply if (ret), so that if someone does add the flag mentioned above, they won't have to remember to fix this too. Reported-by: syzbot+b562969adb2e04af3442@syzkaller.appspotmail.com Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") CC: stable@vger.kernel.org # v5.0+ Signed-off-by: Tycho Andersen <tycho@tycho.ws> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: James Morris <jamorris@linux.microsoft.com>
2019-03-06 20:14:13 +00:00
*/
if ((flags & SECCOMP_FILTER_FLAG_TSYNC) &&
(flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) &&
((flags & SECCOMP_FILTER_FLAG_TSYNC_ESRCH) == 0))
seccomp: Make NEW_LISTENER and TSYNC flags exclusive As the comment notes, the return codes for TSYNC and NEW_LISTENER conflict, because they both return positive values, one in the case of success and one in the case of error. So, let's disallow both of these flags together. While this is technically a userspace break, all the users I know of are still waiting on me to land this feature in libseccomp, so I think it'll be safe. Also, at present my use case doesn't require TSYNC at all, so this isn't a big deal to disallow. If someone wanted to support this, a path forward would be to add a new flag like TSYNC_AND_LISTENER_YES_I_UNDERSTAND_THAT_TSYNC_WILL_JUST_RETURN_EAGAIN, but the use cases are so different I don't see it really happening. Finally, it's worth noting that this does actually fix a UAF issue: at the end of seccomp_set_mode_filter(), we have: if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) { if (ret < 0) { listener_f->private_data = NULL; fput(listener_f); put_unused_fd(listener); } else { fd_install(listener, listener_f); ret = listener; } } out_free: seccomp_filter_free(prepared); But if ret > 0 because TSYNC raced, we'll install the listener fd and then free the filter out from underneath it, causing a UAF when the task closes it or dies. This patch also switches the condition to be simply if (ret), so that if someone does add the flag mentioned above, they won't have to remember to fix this too. Reported-by: syzbot+b562969adb2e04af3442@syzkaller.appspotmail.com Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") CC: stable@vger.kernel.org # v5.0+ Signed-off-by: Tycho Andersen <tycho@tycho.ws> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: James Morris <jamorris@linux.microsoft.com>
2019-03-06 20:14:13 +00:00
return -EINVAL;
seccomp: Add wait_killable semantic to seccomp user notifier This introduces a per-filter flag (SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV) that makes it so that when notifications are received by the supervisor the notifying process will transition to wait killable semantics. Although wait killable isn't a set of semantics formally exposed to userspace, the concept is searchable. If the notifying process is signaled prior to the notification being received by the userspace agent, it will be handled as normal. One quirk about how this is handled is that the notifying process only switches to TASK_KILLABLE if it receives a wakeup from either an addfd or a signal. This is to avoid an unnecessary wakeup of the notifying task. The reasons behind switching into wait_killable only after userspace receives the notification are: * Avoiding unncessary work - Often, workloads will perform work that they may abort (request racing comes to mind). This allows for syscalls to be aborted safely prior to the notification being received by the supervisor. In this, the supervisor doesn't end up doing work that the workload does not want to complete anyways. * Avoiding side effects - We don't want the syscall to be interruptible once the supervisor starts doing work because it may not be trivial to reverse the operation. For example, unmounting a file system may take a long time, and it's hard to rollback, or treat that as reentrant. * Avoid breaking runtimes - Various runtimes do not GC when they are during a syscall (or while running native code that subsequently calls a syscall). If many notifications are blocked, and not picked up by the supervisor, this can get the application into a bad state. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220503080958.20220-2-sargun@sargun.me
2022-05-03 08:09:56 +00:00
/*
* The SECCOMP_FILTER_FLAG_WAIT_KILLABLE_SENT flag doesn't make sense
* without the SECCOMP_FILTER_FLAG_NEW_LISTENER flag.
*/
if ((flags & SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV) &&
((flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) == 0))
return -EINVAL;
/* Prepare the new filter before holding any locks. */
prepared = seccomp_prepare_user_filter(filter);
if (IS_ERR(prepared))
return PTR_ERR(prepared);
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) {
listener = get_unused_fd_flags(O_CLOEXEC);
if (listener < 0) {
ret = listener;
goto out_free;
}
listener_f = init_listener(prepared);
if (IS_ERR(listener_f)) {
put_unused_fd(listener);
ret = PTR_ERR(listener_f);
goto out_free;
}
}
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
/*
* Make sure we cannot change seccomp or nnp state via TSYNC
* while another thread is in the middle of calling exec.
*/
if (flags & SECCOMP_FILTER_FLAG_TSYNC &&
mutex_lock_killable(&current->signal->cred_guard_mutex))
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
goto out_put_fd;
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
spin_lock_irq(&current->sighand->siglock);
if (!seccomp_may_assign_mode(seccomp_mode))
goto out;
if (has_duplicate_listener(prepared)) {
ret = -EBUSY;
goto out;
}
ret = seccomp_attach_filter(flags, prepared);
if (ret)
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
goto out;
/* Do not free the successfully attached filter. */
prepared = NULL;
seccomp_assign_mode(current, seccomp_mode, flags);
seccomp: add system call filtering using BPF [This patch depends on luto@mit.edu's no_new_privs patch: https://lkml.org/lkml/2012/1/30/264 The whole series including Andrew's patches can be found here: https://github.com/redpig/linux/tree/seccomp Complete diff here: https://github.com/redpig/linux/compare/1dc65fed...seccomp ] This patch adds support for seccomp mode 2. Mode 2 introduces the ability for unprivileged processes to install system call filtering policy expressed in terms of a Berkeley Packet Filter (BPF) program. This program will be evaluated in the kernel for each system call the task makes and computes a result based on data in the format of struct seccomp_data. A filter program may be installed by calling: struct sock_fprog fprog = { ... }; ... prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &fprog); The return value of the filter program determines if the system call is allowed to proceed or denied. If the first filter program installed allows prctl(2) calls, then the above call may be made repeatedly by a task to further reduce its access to the kernel. All attached programs must be evaluated before a system call will be allowed to proceed. Filter programs will be inherited across fork/clone and execve. However, if the task attaching the filter is unprivileged (!CAP_SYS_ADMIN) the no_new_privs bit will be set on the task. This ensures that unprivileged tasks cannot attach filters that affect privileged tasks (e.g., setuid binary). There are a number of benefits to this approach. A few of which are as follows: - BPF has been exposed to userland for a long time - BPF optimization (and JIT'ing) are well understood - Userland already knows its ABI: system call numbers and desired arguments - No time-of-check-time-of-use vulnerable data accesses are possible. - system call arguments are loaded on access only to minimize copying required for system call policy decisions. Mode 2 support is restricted to architectures that enable HAVE_ARCH_SECCOMP_FILTER. In this patch, the primary dependency is on syscall_get_arguments(). The full desired scope of this feature will add a few minor additional requirements expressed later in this series. Based on discussion, SECCOMP_RET_ERRNO and SECCOMP_RET_TRACE seem to be the desired additional functionality. No architectures are enabled in this patch. Signed-off-by: Will Drewry <wad@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by: Indan Zupancic <indan@nul.nu> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> v18: - rebase to v3.4-rc2 - s/chk/check/ (akpm@linux-foundation.org,jmorris@namei.org) - allocate with GFP_KERNEL|__GFP_NOWARN (indan@nul.nu) - add a comment for get_u32 regarding endianness (akpm@) - fix other typos, style mistakes (akpm@) - added acked-by v17: - properly guard seccomp filter needed headers (leann@ubuntu.com) - tighten return mask to 0x7fff0000 v16: - no change v15: - add a 4 instr penalty when counting a path to account for seccomp_filter size (indan@nul.nu) - drop the max insns to 256KB (indan@nul.nu) - return ENOMEM if the max insns limit has been hit (indan@nul.nu) - move IP checks after args (indan@nul.nu) - drop !user_filter check (indan@nul.nu) - only allow explicit bpf codes (indan@nul.nu) - exit_code -> exit_sig v14: - put/get_seccomp_filter takes struct task_struct (indan@nul.nu,keescook@chromium.org) - adds seccomp_chk_filter and drops general bpf_run/chk_filter user - add seccomp_bpf_load for use by net/core/filter.c - lower max per-process/per-hierarchy: 1MB - moved nnp/capability check prior to allocation (all of the above: indan@nul.nu) v13: - rebase on to 88ebdda6159ffc15699f204c33feb3e431bf9bdc v12: - added a maximum instruction count per path (indan@nul.nu,oleg@redhat.com) - removed copy_seccomp (keescook@chromium.org,indan@nul.nu) - reworded the prctl_set_seccomp comment (indan@nul.nu) v11: - reorder struct seccomp_data to allow future args expansion (hpa@zytor.com) - style clean up, @compat dropped, compat_sock_fprog32 (indan@nul.nu) - do_exit(SIGSYS) (keescook@chromium.org, luto@mit.edu) - pare down Kconfig doc reference. - extra comment clean up v10: - seccomp_data has changed again to be more aesthetically pleasing (hpa@zytor.com) - calling convention is noted in a new u32 field using syscall_get_arch. This allows for cross-calling convention tasks to use seccomp filters. (hpa@zytor.com) - lots of clean up (thanks, Indan!) v9: - n/a v8: - use bpf_chk_filter, bpf_run_filter. update load_fns - Lots of fixes courtesy of indan@nul.nu: -- fix up load behavior, compat fixups, and merge alloc code, -- renamed pc and dropped __packed, use bool compat. -- Added a hidden CONFIG_SECCOMP_FILTER to synthesize non-arch dependencies v7: (massive overhaul thanks to Indan, others) - added CONFIG_HAVE_ARCH_SECCOMP_FILTER - merged into seccomp.c - minimal seccomp_filter.h - no config option (part of seccomp) - no new prctl - doesn't break seccomp on systems without asm/syscall.h (works but arg access always fails) - dropped seccomp_init_task, extra free functions, ... - dropped the no-asm/syscall.h code paths - merges with network sk_run_filter and sk_chk_filter v6: - fix memory leak on attach compat check failure - require no_new_privs || CAP_SYS_ADMIN prior to filter installation. (luto@mit.edu) - s/seccomp_struct_/seccomp_/ for macros/functions (amwang@redhat.com) - cleaned up Kconfig (amwang@redhat.com) - on block, note if the call was compat (so the # means something) v5: - uses syscall_get_arguments (indan@nul.nu,oleg@redhat.com, mcgrathr@chromium.org) - uses union-based arg storage with hi/lo struct to handle endianness. Compromises between the two alternate proposals to minimize extra arg shuffling and account for endianness assuming userspace uses offsetof(). (mcgrathr@chromium.org, indan@nul.nu) - update Kconfig description - add include/seccomp_filter.h and add its installation - (naive) on-demand syscall argument loading - drop seccomp_t (eparis@redhat.com) v4: - adjusted prctl to make room for PR_[SG]ET_NO_NEW_PRIVS - now uses current->no_new_privs (luto@mit.edu,torvalds@linux-foundation.com) - assign names to seccomp modes (rdunlap@xenotime.net) - fix style issues (rdunlap@xenotime.net) - reworded Kconfig entry (rdunlap@xenotime.net) v3: - macros to inline (oleg@redhat.com) - init_task behavior fixed (oleg@redhat.com) - drop creator entry and extra NULL check (oleg@redhat.com) - alloc returns -EINVAL on bad sizing (serge.hallyn@canonical.com) - adds tentative use of "always_unprivileged" as per torvalds@linux-foundation.org and luto@mit.edu v2: - (patch 2 only) Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-12 21:47:57 +00:00
out:
spin_unlock_irq(&current->sighand->siglock);
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
if (flags & SECCOMP_FILTER_FLAG_TSYNC)
mutex_unlock(&current->signal->cred_guard_mutex);
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
out_put_fd:
if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) {
seccomp: Make NEW_LISTENER and TSYNC flags exclusive As the comment notes, the return codes for TSYNC and NEW_LISTENER conflict, because they both return positive values, one in the case of success and one in the case of error. So, let's disallow both of these flags together. While this is technically a userspace break, all the users I know of are still waiting on me to land this feature in libseccomp, so I think it'll be safe. Also, at present my use case doesn't require TSYNC at all, so this isn't a big deal to disallow. If someone wanted to support this, a path forward would be to add a new flag like TSYNC_AND_LISTENER_YES_I_UNDERSTAND_THAT_TSYNC_WILL_JUST_RETURN_EAGAIN, but the use cases are so different I don't see it really happening. Finally, it's worth noting that this does actually fix a UAF issue: at the end of seccomp_set_mode_filter(), we have: if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) { if (ret < 0) { listener_f->private_data = NULL; fput(listener_f); put_unused_fd(listener); } else { fd_install(listener, listener_f); ret = listener; } } out_free: seccomp_filter_free(prepared); But if ret > 0 because TSYNC raced, we'll install the listener fd and then free the filter out from underneath it, causing a UAF when the task closes it or dies. This patch also switches the condition to be simply if (ret), so that if someone does add the flag mentioned above, they won't have to remember to fix this too. Reported-by: syzbot+b562969adb2e04af3442@syzkaller.appspotmail.com Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") CC: stable@vger.kernel.org # v5.0+ Signed-off-by: Tycho Andersen <tycho@tycho.ws> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: James Morris <jamorris@linux.microsoft.com>
2019-03-06 20:14:13 +00:00
if (ret) {
listener_f->private_data = NULL;
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
fput(listener_f);
put_unused_fd(listener);
seccomp_notify_detach(prepared);
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
} else {
fd_install(listener, listener_f);
ret = listener;
}
}
seccomp: implement SECCOMP_FILTER_FLAG_TSYNC Applying restrictive seccomp filter programs to large or diverse codebases often requires handling threads which may be started early in the process lifetime (e.g., by code that is linked in). While it is possible to apply permissive programs prior to process start up, it is difficult to further restrict the kernel ABI to those threads after that point. This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for synchronizing thread group seccomp filters at filter installation time. When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC, filter) an attempt will be made to synchronize all threads in current's threadgroup to its new seccomp filter program. This is possible iff all threads are using a filter that is an ancestor to the filter current is attempting to synchronize to. NULL filters (where the task is running as SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS, ...) has been set on the calling thread, no_new_privs will be set for all synchronized threads too. On success, 0 is returned. On failure, the pid of one of the failing threads will be returned and no filters will have been applied. The race conditions against another thread are: - requesting TSYNC (already handled by sighand lock) - performing a clone (already handled by sighand lock) - changing its filter (already handled by sighand lock) - calling exec (handled by cred_guard_mutex) The clone case is assisted by the fact that new threads will have their seccomp state duplicated from their parent before appearing on the tasklist. Holding cred_guard_mutex means that seccomp filters cannot be assigned while in the middle of another thread's exec (potentially bypassing no_new_privs or similar). The call to de_thread() may kill threads waiting for the mutex. Changes across threads to the filter pointer includes a barrier. Based on patches by Will Drewry. Suggested-by: Julien Tinnes <jln@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net>
2014-06-05 07:23:17 +00:00
out_free:
seccomp_filter_free(prepared);
return ret;
}
#else
static inline long seccomp_set_mode_filter(unsigned int flags,
const char __user *filter)
{
return -EINVAL;
}
#endif
static long seccomp_get_action_avail(const char __user *uaction)
{
u32 action;
if (copy_from_user(&action, uaction, sizeof(action)))
return -EFAULT;
switch (action) {
seccomp: Implement SECCOMP_RET_KILL_PROCESS action Right now, SECCOMP_RET_KILL_THREAD (neé SECCOMP_RET_KILL) kills the current thread. There have been a few requests for this to kill the entire process (the thread group). This cannot be just changed (discovered when adding coredump support since coredumping kills the entire process) because there are userspace programs depending on the thread-kill behavior. Instead, implement SECCOMP_RET_KILL_PROCESS, which is 0x80000000, and can be processed as "-1" by the kernel, below the existing RET_KILL that is ABI-set to "0". For userspace, SECCOMP_RET_ACTION_FULL is added to expand the mask to the signed bit. Old userspace using the SECCOMP_RET_ACTION mask will see SECCOMP_RET_KILL_PROCESS as 0 still, but this would only be visible when examining the siginfo in a core dump from a RET_KILL_*, where it will think it was thread-killed instead of process-killed. Attempts to introduce this behavior via other ways (filter flags, seccomp struct flags, masked RET_DATA bits) all come with weird side-effects and baggage. This change preserves the central behavioral expectations of the seccomp filter engine without putting too great a burden on changes needed in userspace to use the new action. The new action is discoverable by userspace through either the new actions_avail sysctl or through the SECCOMP_GET_ACTION_AVAIL seccomp operation. If used without checking for availability, old kernels will treat RET_KILL_PROCESS as RET_KILL_THREAD (since the old mask will produce RET_KILL_THREAD). Cc: Paul Moore <paul@paul-moore.com> Cc: Fabricio Voznika <fvoznika@google.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 20:12:11 +00:00
case SECCOMP_RET_KILL_PROCESS:
case SECCOMP_RET_KILL_THREAD:
case SECCOMP_RET_TRAP:
case SECCOMP_RET_ERRNO:
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
case SECCOMP_RET_USER_NOTIF:
case SECCOMP_RET_TRACE:
seccomp: Action to log before allowing Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing the syscall. At the implementation level, this action is identical to the existing SECCOMP_RET_ALLOW action. However, it can be very useful when initially developing a seccomp filter for an application. The developer can set the default action to be SECCOMP_RET_LOG, maybe mark any obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the application through its paces. A list of syscalls that triggered the default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and that list can be used to build the syscall whitelist. Finally, the developer can change the default action to the desired value. This provides a more friendly experience than seeing the application get killed, then updating the filter and rebuilding the app, seeing the application get killed due to a different syscall, then updating the filter and rebuilding the app, etc. The functionality is similar to what's supported by the various LSMs. SELinux has permissive mode, AppArmor has complain mode, SMACK has bring-up mode, etc. SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow while logging is slightly more restrictive than quietly allowing. Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of inspecting the audit log to verify that the syscall was logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if action == RET_LOG && RET_LOG in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:57 +00:00
case SECCOMP_RET_LOG:
case SECCOMP_RET_ALLOW:
break;
default:
return -EOPNOTSUPP;
}
return 0;
}
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
static long seccomp_get_notif_sizes(void __user *usizes)
{
struct seccomp_notif_sizes sizes = {
.seccomp_notif = sizeof(struct seccomp_notif),
.seccomp_notif_resp = sizeof(struct seccomp_notif_resp),
.seccomp_data = sizeof(struct seccomp_data),
};
if (copy_to_user(usizes, &sizes, sizeof(sizes)))
return -EFAULT;
return 0;
}
/* Common entry point for both prctl and syscall. */
static long do_seccomp(unsigned int op, unsigned int flags,
void __user *uargs)
{
switch (op) {
case SECCOMP_SET_MODE_STRICT:
if (flags != 0 || uargs != NULL)
return -EINVAL;
return seccomp_set_mode_strict();
case SECCOMP_SET_MODE_FILTER:
return seccomp_set_mode_filter(flags, uargs);
case SECCOMP_GET_ACTION_AVAIL:
if (flags != 0)
return -EINVAL;
return seccomp_get_action_avail(uargs);
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
case SECCOMP_GET_NOTIF_SIZES:
if (flags != 0)
return -EINVAL;
return seccomp_get_notif_sizes(uargs);
default:
return -EINVAL;
}
}
SYSCALL_DEFINE3(seccomp, unsigned int, op, unsigned int, flags,
void __user *, uargs)
{
return do_seccomp(op, flags, uargs);
}
/**
* prctl_set_seccomp: configures current->seccomp.mode
* @seccomp_mode: requested mode to use
* @filter: optional struct sock_fprog for use with SECCOMP_MODE_FILTER
*
* Returns 0 on success or -EINVAL on failure.
*/
long prctl_set_seccomp(unsigned long seccomp_mode, void __user *filter)
{
unsigned int op;
void __user *uargs;
switch (seccomp_mode) {
case SECCOMP_MODE_STRICT:
op = SECCOMP_SET_MODE_STRICT;
/*
* Setting strict mode through prctl always ignored filter,
* so make sure it is always NULL here to pass the internal
* check in do_seccomp().
*/
uargs = NULL;
break;
case SECCOMP_MODE_FILTER:
op = SECCOMP_SET_MODE_FILTER;
uargs = filter;
break;
default:
return -EINVAL;
}
/* prctl interface doesn't have flags, so they are always zero. */
return do_seccomp(op, 0, uargs);
}
seccomp, ptrace: add support for dumping seccomp filters This patch adds support for dumping a process' (classic BPF) seccomp filters via ptrace. PTRACE_SECCOMP_GET_FILTER allows the tracer to dump the user's classic BPF seccomp filters. addr should be an integer which represents the ith seccomp filter (0 is the most recently installed filter). data should be a struct sock_filter * with enough room for the ith filter, or NULL, in which case the filter is not saved. The return value for this command is the number of BPF instructions the program represents, or negative in the case of errors. Command specific errors are ENOENT: which indicates that there is no ith filter in this seccomp tree, and EMEDIUMTYPE, which indicates that the ith filter was not installed as a classic BPF filter. A caveat with this approach is that there is no way to get explicitly at the heirarchy of seccomp filters, and users need to memcmp() filters to decide which are inherited. This means that a task which installs two of the same filter can potentially confuse users of this interface. v2: * make save_orig const * check that the orig_prog exists (not necessary right now, but when grows eBPF support it will be) * s/n/filter_off and make it an unsigned long to match ptrace * count "down" the tree instead of "up" when passing a filter offset v3: * don't take the current task's lock for inspecting its seccomp mode * use a 0x42** constant for the ptrace command value v4: * don't copy to userspace while holding spinlocks v5: * add another condition to WARN_ON v6: * rebase on net-next Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> CC: Will Drewry <wad@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> CC: Alexei Starovoitov <ast@kernel.org> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 00:23:59 +00:00
#if defined(CONFIG_SECCOMP_FILTER) && defined(CONFIG_CHECKPOINT_RESTORE)
static struct seccomp_filter *get_nth_filter(struct task_struct *task,
unsigned long filter_off)
seccomp, ptrace: add support for dumping seccomp filters This patch adds support for dumping a process' (classic BPF) seccomp filters via ptrace. PTRACE_SECCOMP_GET_FILTER allows the tracer to dump the user's classic BPF seccomp filters. addr should be an integer which represents the ith seccomp filter (0 is the most recently installed filter). data should be a struct sock_filter * with enough room for the ith filter, or NULL, in which case the filter is not saved. The return value for this command is the number of BPF instructions the program represents, or negative in the case of errors. Command specific errors are ENOENT: which indicates that there is no ith filter in this seccomp tree, and EMEDIUMTYPE, which indicates that the ith filter was not installed as a classic BPF filter. A caveat with this approach is that there is no way to get explicitly at the heirarchy of seccomp filters, and users need to memcmp() filters to decide which are inherited. This means that a task which installs two of the same filter can potentially confuse users of this interface. v2: * make save_orig const * check that the orig_prog exists (not necessary right now, but when grows eBPF support it will be) * s/n/filter_off and make it an unsigned long to match ptrace * count "down" the tree instead of "up" when passing a filter offset v3: * don't take the current task's lock for inspecting its seccomp mode * use a 0x42** constant for the ptrace command value v4: * don't copy to userspace while holding spinlocks v5: * add another condition to WARN_ON v6: * rebase on net-next Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> CC: Will Drewry <wad@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> CC: Alexei Starovoitov <ast@kernel.org> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 00:23:59 +00:00
{
struct seccomp_filter *orig, *filter;
unsigned long count;
seccomp, ptrace: add support for dumping seccomp filters This patch adds support for dumping a process' (classic BPF) seccomp filters via ptrace. PTRACE_SECCOMP_GET_FILTER allows the tracer to dump the user's classic BPF seccomp filters. addr should be an integer which represents the ith seccomp filter (0 is the most recently installed filter). data should be a struct sock_filter * with enough room for the ith filter, or NULL, in which case the filter is not saved. The return value for this command is the number of BPF instructions the program represents, or negative in the case of errors. Command specific errors are ENOENT: which indicates that there is no ith filter in this seccomp tree, and EMEDIUMTYPE, which indicates that the ith filter was not installed as a classic BPF filter. A caveat with this approach is that there is no way to get explicitly at the heirarchy of seccomp filters, and users need to memcmp() filters to decide which are inherited. This means that a task which installs two of the same filter can potentially confuse users of this interface. v2: * make save_orig const * check that the orig_prog exists (not necessary right now, but when grows eBPF support it will be) * s/n/filter_off and make it an unsigned long to match ptrace * count "down" the tree instead of "up" when passing a filter offset v3: * don't take the current task's lock for inspecting its seccomp mode * use a 0x42** constant for the ptrace command value v4: * don't copy to userspace while holding spinlocks v5: * add another condition to WARN_ON v6: * rebase on net-next Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> CC: Will Drewry <wad@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> CC: Alexei Starovoitov <ast@kernel.org> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 00:23:59 +00:00
/*
* Note: this is only correct because the caller should be the (ptrace)
* tracer of the task, otherwise lock_task_sighand is needed.
*/
seccomp, ptrace: add support for dumping seccomp filters This patch adds support for dumping a process' (classic BPF) seccomp filters via ptrace. PTRACE_SECCOMP_GET_FILTER allows the tracer to dump the user's classic BPF seccomp filters. addr should be an integer which represents the ith seccomp filter (0 is the most recently installed filter). data should be a struct sock_filter * with enough room for the ith filter, or NULL, in which case the filter is not saved. The return value for this command is the number of BPF instructions the program represents, or negative in the case of errors. Command specific errors are ENOENT: which indicates that there is no ith filter in this seccomp tree, and EMEDIUMTYPE, which indicates that the ith filter was not installed as a classic BPF filter. A caveat with this approach is that there is no way to get explicitly at the heirarchy of seccomp filters, and users need to memcmp() filters to decide which are inherited. This means that a task which installs two of the same filter can potentially confuse users of this interface. v2: * make save_orig const * check that the orig_prog exists (not necessary right now, but when grows eBPF support it will be) * s/n/filter_off and make it an unsigned long to match ptrace * count "down" the tree instead of "up" when passing a filter offset v3: * don't take the current task's lock for inspecting its seccomp mode * use a 0x42** constant for the ptrace command value v4: * don't copy to userspace while holding spinlocks v5: * add another condition to WARN_ON v6: * rebase on net-next Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> CC: Will Drewry <wad@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> CC: Alexei Starovoitov <ast@kernel.org> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 00:23:59 +00:00
spin_lock_irq(&task->sighand->siglock);
seccomp, ptrace: add support for dumping seccomp filters This patch adds support for dumping a process' (classic BPF) seccomp filters via ptrace. PTRACE_SECCOMP_GET_FILTER allows the tracer to dump the user's classic BPF seccomp filters. addr should be an integer which represents the ith seccomp filter (0 is the most recently installed filter). data should be a struct sock_filter * with enough room for the ith filter, or NULL, in which case the filter is not saved. The return value for this command is the number of BPF instructions the program represents, or negative in the case of errors. Command specific errors are ENOENT: which indicates that there is no ith filter in this seccomp tree, and EMEDIUMTYPE, which indicates that the ith filter was not installed as a classic BPF filter. A caveat with this approach is that there is no way to get explicitly at the heirarchy of seccomp filters, and users need to memcmp() filters to decide which are inherited. This means that a task which installs two of the same filter can potentially confuse users of this interface. v2: * make save_orig const * check that the orig_prog exists (not necessary right now, but when grows eBPF support it will be) * s/n/filter_off and make it an unsigned long to match ptrace * count "down" the tree instead of "up" when passing a filter offset v3: * don't take the current task's lock for inspecting its seccomp mode * use a 0x42** constant for the ptrace command value v4: * don't copy to userspace while holding spinlocks v5: * add another condition to WARN_ON v6: * rebase on net-next Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> CC: Will Drewry <wad@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> CC: Alexei Starovoitov <ast@kernel.org> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 00:23:59 +00:00
if (task->seccomp.mode != SECCOMP_MODE_FILTER) {
spin_unlock_irq(&task->sighand->siglock);
return ERR_PTR(-EINVAL);
seccomp, ptrace: add support for dumping seccomp filters This patch adds support for dumping a process' (classic BPF) seccomp filters via ptrace. PTRACE_SECCOMP_GET_FILTER allows the tracer to dump the user's classic BPF seccomp filters. addr should be an integer which represents the ith seccomp filter (0 is the most recently installed filter). data should be a struct sock_filter * with enough room for the ith filter, or NULL, in which case the filter is not saved. The return value for this command is the number of BPF instructions the program represents, or negative in the case of errors. Command specific errors are ENOENT: which indicates that there is no ith filter in this seccomp tree, and EMEDIUMTYPE, which indicates that the ith filter was not installed as a classic BPF filter. A caveat with this approach is that there is no way to get explicitly at the heirarchy of seccomp filters, and users need to memcmp() filters to decide which are inherited. This means that a task which installs two of the same filter can potentially confuse users of this interface. v2: * make save_orig const * check that the orig_prog exists (not necessary right now, but when grows eBPF support it will be) * s/n/filter_off and make it an unsigned long to match ptrace * count "down" the tree instead of "up" when passing a filter offset v3: * don't take the current task's lock for inspecting its seccomp mode * use a 0x42** constant for the ptrace command value v4: * don't copy to userspace while holding spinlocks v5: * add another condition to WARN_ON v6: * rebase on net-next Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> CC: Will Drewry <wad@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> CC: Alexei Starovoitov <ast@kernel.org> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 00:23:59 +00:00
}
orig = task->seccomp.filter;
__get_seccomp_filter(orig);
spin_unlock_irq(&task->sighand->siglock);
count = 0;
for (filter = orig; filter; filter = filter->prev)
seccomp, ptrace: add support for dumping seccomp filters This patch adds support for dumping a process' (classic BPF) seccomp filters via ptrace. PTRACE_SECCOMP_GET_FILTER allows the tracer to dump the user's classic BPF seccomp filters. addr should be an integer which represents the ith seccomp filter (0 is the most recently installed filter). data should be a struct sock_filter * with enough room for the ith filter, or NULL, in which case the filter is not saved. The return value for this command is the number of BPF instructions the program represents, or negative in the case of errors. Command specific errors are ENOENT: which indicates that there is no ith filter in this seccomp tree, and EMEDIUMTYPE, which indicates that the ith filter was not installed as a classic BPF filter. A caveat with this approach is that there is no way to get explicitly at the heirarchy of seccomp filters, and users need to memcmp() filters to decide which are inherited. This means that a task which installs two of the same filter can potentially confuse users of this interface. v2: * make save_orig const * check that the orig_prog exists (not necessary right now, but when grows eBPF support it will be) * s/n/filter_off and make it an unsigned long to match ptrace * count "down" the tree instead of "up" when passing a filter offset v3: * don't take the current task's lock for inspecting its seccomp mode * use a 0x42** constant for the ptrace command value v4: * don't copy to userspace while holding spinlocks v5: * add another condition to WARN_ON v6: * rebase on net-next Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> CC: Will Drewry <wad@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> CC: Alexei Starovoitov <ast@kernel.org> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 00:23:59 +00:00
count++;
if (filter_off >= count) {
filter = ERR_PTR(-ENOENT);
seccomp, ptrace: add support for dumping seccomp filters This patch adds support for dumping a process' (classic BPF) seccomp filters via ptrace. PTRACE_SECCOMP_GET_FILTER allows the tracer to dump the user's classic BPF seccomp filters. addr should be an integer which represents the ith seccomp filter (0 is the most recently installed filter). data should be a struct sock_filter * with enough room for the ith filter, or NULL, in which case the filter is not saved. The return value for this command is the number of BPF instructions the program represents, or negative in the case of errors. Command specific errors are ENOENT: which indicates that there is no ith filter in this seccomp tree, and EMEDIUMTYPE, which indicates that the ith filter was not installed as a classic BPF filter. A caveat with this approach is that there is no way to get explicitly at the heirarchy of seccomp filters, and users need to memcmp() filters to decide which are inherited. This means that a task which installs two of the same filter can potentially confuse users of this interface. v2: * make save_orig const * check that the orig_prog exists (not necessary right now, but when grows eBPF support it will be) * s/n/filter_off and make it an unsigned long to match ptrace * count "down" the tree instead of "up" when passing a filter offset v3: * don't take the current task's lock for inspecting its seccomp mode * use a 0x42** constant for the ptrace command value v4: * don't copy to userspace while holding spinlocks v5: * add another condition to WARN_ON v6: * rebase on net-next Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> CC: Will Drewry <wad@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> CC: Alexei Starovoitov <ast@kernel.org> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 00:23:59 +00:00
goto out;
}
count -= filter_off;
for (filter = orig; filter && count > 1; filter = filter->prev)
seccomp, ptrace: add support for dumping seccomp filters This patch adds support for dumping a process' (classic BPF) seccomp filters via ptrace. PTRACE_SECCOMP_GET_FILTER allows the tracer to dump the user's classic BPF seccomp filters. addr should be an integer which represents the ith seccomp filter (0 is the most recently installed filter). data should be a struct sock_filter * with enough room for the ith filter, or NULL, in which case the filter is not saved. The return value for this command is the number of BPF instructions the program represents, or negative in the case of errors. Command specific errors are ENOENT: which indicates that there is no ith filter in this seccomp tree, and EMEDIUMTYPE, which indicates that the ith filter was not installed as a classic BPF filter. A caveat with this approach is that there is no way to get explicitly at the heirarchy of seccomp filters, and users need to memcmp() filters to decide which are inherited. This means that a task which installs two of the same filter can potentially confuse users of this interface. v2: * make save_orig const * check that the orig_prog exists (not necessary right now, but when grows eBPF support it will be) * s/n/filter_off and make it an unsigned long to match ptrace * count "down" the tree instead of "up" when passing a filter offset v3: * don't take the current task's lock for inspecting its seccomp mode * use a 0x42** constant for the ptrace command value v4: * don't copy to userspace while holding spinlocks v5: * add another condition to WARN_ON v6: * rebase on net-next Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> CC: Will Drewry <wad@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> CC: Alexei Starovoitov <ast@kernel.org> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 00:23:59 +00:00
count--;
if (WARN_ON(count != 1 || !filter)) {
filter = ERR_PTR(-ENOENT);
seccomp, ptrace: add support for dumping seccomp filters This patch adds support for dumping a process' (classic BPF) seccomp filters via ptrace. PTRACE_SECCOMP_GET_FILTER allows the tracer to dump the user's classic BPF seccomp filters. addr should be an integer which represents the ith seccomp filter (0 is the most recently installed filter). data should be a struct sock_filter * with enough room for the ith filter, or NULL, in which case the filter is not saved. The return value for this command is the number of BPF instructions the program represents, or negative in the case of errors. Command specific errors are ENOENT: which indicates that there is no ith filter in this seccomp tree, and EMEDIUMTYPE, which indicates that the ith filter was not installed as a classic BPF filter. A caveat with this approach is that there is no way to get explicitly at the heirarchy of seccomp filters, and users need to memcmp() filters to decide which are inherited. This means that a task which installs two of the same filter can potentially confuse users of this interface. v2: * make save_orig const * check that the orig_prog exists (not necessary right now, but when grows eBPF support it will be) * s/n/filter_off and make it an unsigned long to match ptrace * count "down" the tree instead of "up" when passing a filter offset v3: * don't take the current task's lock for inspecting its seccomp mode * use a 0x42** constant for the ptrace command value v4: * don't copy to userspace while holding spinlocks v5: * add another condition to WARN_ON v6: * rebase on net-next Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> CC: Will Drewry <wad@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> CC: Alexei Starovoitov <ast@kernel.org> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 00:23:59 +00:00
goto out;
}
__get_seccomp_filter(filter);
out:
__put_seccomp_filter(orig);
return filter;
}
long seccomp_get_filter(struct task_struct *task, unsigned long filter_off,
void __user *data)
{
struct seccomp_filter *filter;
struct sock_fprog_kern *fprog;
long ret;
if (!capable(CAP_SYS_ADMIN) ||
current->seccomp.mode != SECCOMP_MODE_DISABLED) {
return -EACCES;
}
filter = get_nth_filter(task, filter_off);
if (IS_ERR(filter))
return PTR_ERR(filter);
seccomp, ptrace: add support for dumping seccomp filters This patch adds support for dumping a process' (classic BPF) seccomp filters via ptrace. PTRACE_SECCOMP_GET_FILTER allows the tracer to dump the user's classic BPF seccomp filters. addr should be an integer which represents the ith seccomp filter (0 is the most recently installed filter). data should be a struct sock_filter * with enough room for the ith filter, or NULL, in which case the filter is not saved. The return value for this command is the number of BPF instructions the program represents, or negative in the case of errors. Command specific errors are ENOENT: which indicates that there is no ith filter in this seccomp tree, and EMEDIUMTYPE, which indicates that the ith filter was not installed as a classic BPF filter. A caveat with this approach is that there is no way to get explicitly at the heirarchy of seccomp filters, and users need to memcmp() filters to decide which are inherited. This means that a task which installs two of the same filter can potentially confuse users of this interface. v2: * make save_orig const * check that the orig_prog exists (not necessary right now, but when grows eBPF support it will be) * s/n/filter_off and make it an unsigned long to match ptrace * count "down" the tree instead of "up" when passing a filter offset v3: * don't take the current task's lock for inspecting its seccomp mode * use a 0x42** constant for the ptrace command value v4: * don't copy to userspace while holding spinlocks v5: * add another condition to WARN_ON v6: * rebase on net-next Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> CC: Will Drewry <wad@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> CC: Alexei Starovoitov <ast@kernel.org> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 00:23:59 +00:00
fprog = filter->prog->orig_prog;
if (!fprog) {
/* This must be a new non-cBPF filter, since we save
seccomp, ptrace: add support for dumping seccomp filters This patch adds support for dumping a process' (classic BPF) seccomp filters via ptrace. PTRACE_SECCOMP_GET_FILTER allows the tracer to dump the user's classic BPF seccomp filters. addr should be an integer which represents the ith seccomp filter (0 is the most recently installed filter). data should be a struct sock_filter * with enough room for the ith filter, or NULL, in which case the filter is not saved. The return value for this command is the number of BPF instructions the program represents, or negative in the case of errors. Command specific errors are ENOENT: which indicates that there is no ith filter in this seccomp tree, and EMEDIUMTYPE, which indicates that the ith filter was not installed as a classic BPF filter. A caveat with this approach is that there is no way to get explicitly at the heirarchy of seccomp filters, and users need to memcmp() filters to decide which are inherited. This means that a task which installs two of the same filter can potentially confuse users of this interface. v2: * make save_orig const * check that the orig_prog exists (not necessary right now, but when grows eBPF support it will be) * s/n/filter_off and make it an unsigned long to match ptrace * count "down" the tree instead of "up" when passing a filter offset v3: * don't take the current task's lock for inspecting its seccomp mode * use a 0x42** constant for the ptrace command value v4: * don't copy to userspace while holding spinlocks v5: * add another condition to WARN_ON v6: * rebase on net-next Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> CC: Will Drewry <wad@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> CC: Alexei Starovoitov <ast@kernel.org> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 00:23:59 +00:00
* every cBPF filter's orig_prog above when
* CONFIG_CHECKPOINT_RESTORE is enabled.
*/
ret = -EMEDIUMTYPE;
goto out;
}
ret = fprog->len;
if (!data)
goto out;
if (copy_to_user(data, fprog->filter, bpf_classic_proglen(fprog)))
ret = -EFAULT;
out:
__put_seccomp_filter(filter);
seccomp, ptrace: add support for dumping seccomp filters This patch adds support for dumping a process' (classic BPF) seccomp filters via ptrace. PTRACE_SECCOMP_GET_FILTER allows the tracer to dump the user's classic BPF seccomp filters. addr should be an integer which represents the ith seccomp filter (0 is the most recently installed filter). data should be a struct sock_filter * with enough room for the ith filter, or NULL, in which case the filter is not saved. The return value for this command is the number of BPF instructions the program represents, or negative in the case of errors. Command specific errors are ENOENT: which indicates that there is no ith filter in this seccomp tree, and EMEDIUMTYPE, which indicates that the ith filter was not installed as a classic BPF filter. A caveat with this approach is that there is no way to get explicitly at the heirarchy of seccomp filters, and users need to memcmp() filters to decide which are inherited. This means that a task which installs two of the same filter can potentially confuse users of this interface. v2: * make save_orig const * check that the orig_prog exists (not necessary right now, but when grows eBPF support it will be) * s/n/filter_off and make it an unsigned long to match ptrace * count "down" the tree instead of "up" when passing a filter offset v3: * don't take the current task's lock for inspecting its seccomp mode * use a 0x42** constant for the ptrace command value v4: * don't copy to userspace while holding spinlocks v5: * add another condition to WARN_ON v6: * rebase on net-next Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> CC: Will Drewry <wad@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> CC: Alexei Starovoitov <ast@kernel.org> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 00:23:59 +00:00
return ret;
}
long seccomp_get_metadata(struct task_struct *task,
unsigned long size, void __user *data)
{
long ret;
struct seccomp_filter *filter;
struct seccomp_metadata kmd = {};
if (!capable(CAP_SYS_ADMIN) ||
current->seccomp.mode != SECCOMP_MODE_DISABLED) {
return -EACCES;
}
size = min_t(unsigned long, size, sizeof(kmd));
if (size < sizeof(kmd.filter_off))
return -EINVAL;
if (copy_from_user(&kmd.filter_off, data, sizeof(kmd.filter_off)))
return -EFAULT;
filter = get_nth_filter(task, kmd.filter_off);
if (IS_ERR(filter))
return PTR_ERR(filter);
if (filter->log)
kmd.flags |= SECCOMP_FILTER_FLAG_LOG;
ret = size;
if (copy_to_user(data, &kmd, size))
ret = -EFAULT;
__put_seccomp_filter(filter);
seccomp, ptrace: add support for dumping seccomp filters This patch adds support for dumping a process' (classic BPF) seccomp filters via ptrace. PTRACE_SECCOMP_GET_FILTER allows the tracer to dump the user's classic BPF seccomp filters. addr should be an integer which represents the ith seccomp filter (0 is the most recently installed filter). data should be a struct sock_filter * with enough room for the ith filter, or NULL, in which case the filter is not saved. The return value for this command is the number of BPF instructions the program represents, or negative in the case of errors. Command specific errors are ENOENT: which indicates that there is no ith filter in this seccomp tree, and EMEDIUMTYPE, which indicates that the ith filter was not installed as a classic BPF filter. A caveat with this approach is that there is no way to get explicitly at the heirarchy of seccomp filters, and users need to memcmp() filters to decide which are inherited. This means that a task which installs two of the same filter can potentially confuse users of this interface. v2: * make save_orig const * check that the orig_prog exists (not necessary right now, but when grows eBPF support it will be) * s/n/filter_off and make it an unsigned long to match ptrace * count "down" the tree instead of "up" when passing a filter offset v3: * don't take the current task's lock for inspecting its seccomp mode * use a 0x42** constant for the ptrace command value v4: * don't copy to userspace while holding spinlocks v5: * add another condition to WARN_ON v6: * rebase on net-next Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> CC: Will Drewry <wad@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Pavel Emelyanov <xemul@parallels.com> CC: Serge E. Hallyn <serge.hallyn@ubuntu.com> CC: Alexei Starovoitov <ast@kernel.org> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 00:23:59 +00:00
return ret;
}
#endif
#ifdef CONFIG_SYSCTL
/* Human readable action names for friendly sysctl interaction */
seccomp: Implement SECCOMP_RET_KILL_PROCESS action Right now, SECCOMP_RET_KILL_THREAD (neé SECCOMP_RET_KILL) kills the current thread. There have been a few requests for this to kill the entire process (the thread group). This cannot be just changed (discovered when adding coredump support since coredumping kills the entire process) because there are userspace programs depending on the thread-kill behavior. Instead, implement SECCOMP_RET_KILL_PROCESS, which is 0x80000000, and can be processed as "-1" by the kernel, below the existing RET_KILL that is ABI-set to "0". For userspace, SECCOMP_RET_ACTION_FULL is added to expand the mask to the signed bit. Old userspace using the SECCOMP_RET_ACTION mask will see SECCOMP_RET_KILL_PROCESS as 0 still, but this would only be visible when examining the siginfo in a core dump from a RET_KILL_*, where it will think it was thread-killed instead of process-killed. Attempts to introduce this behavior via other ways (filter flags, seccomp struct flags, masked RET_DATA bits) all come with weird side-effects and baggage. This change preserves the central behavioral expectations of the seccomp filter engine without putting too great a burden on changes needed in userspace to use the new action. The new action is discoverable by userspace through either the new actions_avail sysctl or through the SECCOMP_GET_ACTION_AVAIL seccomp operation. If used without checking for availability, old kernels will treat RET_KILL_PROCESS as RET_KILL_THREAD (since the old mask will produce RET_KILL_THREAD). Cc: Paul Moore <paul@paul-moore.com> Cc: Fabricio Voznika <fvoznika@google.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 20:12:11 +00:00
#define SECCOMP_RET_KILL_PROCESS_NAME "kill_process"
#define SECCOMP_RET_KILL_THREAD_NAME "kill_thread"
#define SECCOMP_RET_TRAP_NAME "trap"
#define SECCOMP_RET_ERRNO_NAME "errno"
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
#define SECCOMP_RET_USER_NOTIF_NAME "user_notif"
#define SECCOMP_RET_TRACE_NAME "trace"
seccomp: Action to log before allowing Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing the syscall. At the implementation level, this action is identical to the existing SECCOMP_RET_ALLOW action. However, it can be very useful when initially developing a seccomp filter for an application. The developer can set the default action to be SECCOMP_RET_LOG, maybe mark any obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the application through its paces. A list of syscalls that triggered the default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and that list can be used to build the syscall whitelist. Finally, the developer can change the default action to the desired value. This provides a more friendly experience than seeing the application get killed, then updating the filter and rebuilding the app, seeing the application get killed due to a different syscall, then updating the filter and rebuilding the app, etc. The functionality is similar to what's supported by the various LSMs. SELinux has permissive mode, AppArmor has complain mode, SMACK has bring-up mode, etc. SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow while logging is slightly more restrictive than quietly allowing. Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of inspecting the audit log to verify that the syscall was logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if action == RET_LOG && RET_LOG in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:57 +00:00
#define SECCOMP_RET_LOG_NAME "log"
#define SECCOMP_RET_ALLOW_NAME "allow"
static const char seccomp_actions_avail[] =
seccomp: Implement SECCOMP_RET_KILL_PROCESS action Right now, SECCOMP_RET_KILL_THREAD (neé SECCOMP_RET_KILL) kills the current thread. There have been a few requests for this to kill the entire process (the thread group). This cannot be just changed (discovered when adding coredump support since coredumping kills the entire process) because there are userspace programs depending on the thread-kill behavior. Instead, implement SECCOMP_RET_KILL_PROCESS, which is 0x80000000, and can be processed as "-1" by the kernel, below the existing RET_KILL that is ABI-set to "0". For userspace, SECCOMP_RET_ACTION_FULL is added to expand the mask to the signed bit. Old userspace using the SECCOMP_RET_ACTION mask will see SECCOMP_RET_KILL_PROCESS as 0 still, but this would only be visible when examining the siginfo in a core dump from a RET_KILL_*, where it will think it was thread-killed instead of process-killed. Attempts to introduce this behavior via other ways (filter flags, seccomp struct flags, masked RET_DATA bits) all come with weird side-effects and baggage. This change preserves the central behavioral expectations of the seccomp filter engine without putting too great a burden on changes needed in userspace to use the new action. The new action is discoverable by userspace through either the new actions_avail sysctl or through the SECCOMP_GET_ACTION_AVAIL seccomp operation. If used without checking for availability, old kernels will treat RET_KILL_PROCESS as RET_KILL_THREAD (since the old mask will produce RET_KILL_THREAD). Cc: Paul Moore <paul@paul-moore.com> Cc: Fabricio Voznika <fvoznika@google.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 20:12:11 +00:00
SECCOMP_RET_KILL_PROCESS_NAME " "
SECCOMP_RET_KILL_THREAD_NAME " "
SECCOMP_RET_TRAP_NAME " "
SECCOMP_RET_ERRNO_NAME " "
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
SECCOMP_RET_USER_NOTIF_NAME " "
SECCOMP_RET_TRACE_NAME " "
SECCOMP_RET_LOG_NAME " "
SECCOMP_RET_ALLOW_NAME;
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
struct seccomp_log_name {
u32 log;
const char *name;
};
static const struct seccomp_log_name seccomp_log_names[] = {
seccomp: Implement SECCOMP_RET_KILL_PROCESS action Right now, SECCOMP_RET_KILL_THREAD (neé SECCOMP_RET_KILL) kills the current thread. There have been a few requests for this to kill the entire process (the thread group). This cannot be just changed (discovered when adding coredump support since coredumping kills the entire process) because there are userspace programs depending on the thread-kill behavior. Instead, implement SECCOMP_RET_KILL_PROCESS, which is 0x80000000, and can be processed as "-1" by the kernel, below the existing RET_KILL that is ABI-set to "0". For userspace, SECCOMP_RET_ACTION_FULL is added to expand the mask to the signed bit. Old userspace using the SECCOMP_RET_ACTION mask will see SECCOMP_RET_KILL_PROCESS as 0 still, but this would only be visible when examining the siginfo in a core dump from a RET_KILL_*, where it will think it was thread-killed instead of process-killed. Attempts to introduce this behavior via other ways (filter flags, seccomp struct flags, masked RET_DATA bits) all come with weird side-effects and baggage. This change preserves the central behavioral expectations of the seccomp filter engine without putting too great a burden on changes needed in userspace to use the new action. The new action is discoverable by userspace through either the new actions_avail sysctl or through the SECCOMP_GET_ACTION_AVAIL seccomp operation. If used without checking for availability, old kernels will treat RET_KILL_PROCESS as RET_KILL_THREAD (since the old mask will produce RET_KILL_THREAD). Cc: Paul Moore <paul@paul-moore.com> Cc: Fabricio Voznika <fvoznika@google.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 20:12:11 +00:00
{ SECCOMP_LOG_KILL_PROCESS, SECCOMP_RET_KILL_PROCESS_NAME },
{ SECCOMP_LOG_KILL_THREAD, SECCOMP_RET_KILL_THREAD_NAME },
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
{ SECCOMP_LOG_TRAP, SECCOMP_RET_TRAP_NAME },
{ SECCOMP_LOG_ERRNO, SECCOMP_RET_ERRNO_NAME },
seccomp: add a return code to trap to userspace This patch introduces a means for syscalls matched in seccomp to notify some other task that a particular filter has been triggered. The motivation for this is primarily for use with containers. For example, if a container does an init_module(), we obviously don't want to load this untrusted code, which may be compiled for the wrong version of the kernel anyway. Instead, we could parse the module image, figure out which module the container is trying to load and load it on the host. As another example, containers cannot mount() in general since various filesystems assume a trusted image. However, if an orchestrator knows that e.g. a particular block device has not been exposed to a container for writing, it want to allow the container to mount that block device (that is, handle the mount for it). This patch adds functionality that is already possible via at least two other means that I know about, both of which involve ptrace(): first, one could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL. Unfortunately this is slow, so a faster version would be to install a filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP. Since ptrace allows only one tracer, if the container runtime is that tracer, users inside the container (or outside) trying to debug it will not be able to use ptrace, which is annoying. It also means that older distributions based on Upstart cannot boot inside containers using ptrace, since upstart itself uses ptrace to monitor services while starting. The actual implementation of this is fairly small, although getting the synchronization right was/is slightly complex. Finally, it's worth noting that the classic seccomp TOCTOU of reading memory data from the task still applies here, but can be avoided with careful design of the userspace handler: if the userspace handler reads all of the task memory that is necessary before applying its security policy, the tracee's subsequent memory edits will not be read by the tracer. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> Acked-by: Serge Hallyn <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-09 18:24:13 +00:00
{ SECCOMP_LOG_USER_NOTIF, SECCOMP_RET_USER_NOTIF_NAME },
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
{ SECCOMP_LOG_TRACE, SECCOMP_RET_TRACE_NAME },
seccomp: Action to log before allowing Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing the syscall. At the implementation level, this action is identical to the existing SECCOMP_RET_ALLOW action. However, it can be very useful when initially developing a seccomp filter for an application. The developer can set the default action to be SECCOMP_RET_LOG, maybe mark any obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the application through its paces. A list of syscalls that triggered the default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and that list can be used to build the syscall whitelist. Finally, the developer can change the default action to the desired value. This provides a more friendly experience than seeing the application get killed, then updating the filter and rebuilding the app, seeing the application get killed due to a different syscall, then updating the filter and rebuilding the app, etc. The functionality is similar to what's supported by the various LSMs. SELinux has permissive mode, AppArmor has complain mode, SMACK has bring-up mode, etc. SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow while logging is slightly more restrictive than quietly allowing. Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of inspecting the audit log to verify that the syscall was logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if action == RET_LOG && RET_LOG in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:57 +00:00
{ SECCOMP_LOG_LOG, SECCOMP_RET_LOG_NAME },
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
{ SECCOMP_LOG_ALLOW, SECCOMP_RET_ALLOW_NAME },
{ }
};
static bool seccomp_names_from_actions_logged(char *names, size_t size,
u32 actions_logged,
const char *sep)
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
{
const struct seccomp_log_name *cur;
bool append_sep = false;
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
for (cur = seccomp_log_names; cur->name && size; cur++) {
ssize_t ret;
if (!(actions_logged & cur->log))
continue;
if (append_sep) {
ret = strscpy(names, sep, size);
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
if (ret < 0)
return false;
names += ret;
size -= ret;
} else
append_sep = true;
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
ret = strscpy(names, cur->name, size);
if (ret < 0)
return false;
names += ret;
size -= ret;
}
return true;
}
static bool seccomp_action_logged_from_name(u32 *action_logged,
const char *name)
{
const struct seccomp_log_name *cur;
for (cur = seccomp_log_names; cur->name; cur++) {
if (!strcmp(cur->name, name)) {
*action_logged = cur->log;
return true;
}
}
return false;
}
static bool seccomp_actions_logged_from_names(u32 *actions_logged, char *names)
{
char *name;
*actions_logged = 0;
while ((name = strsep(&names, " ")) && *name) {
u32 action_logged = 0;
if (!seccomp_action_logged_from_name(&action_logged, name))
return false;
*actions_logged |= action_logged;
}
return true;
}
static int read_actions_logged(struct ctl_table *ro_table, void *buffer,
size_t *lenp, loff_t *ppos)
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
{
char names[sizeof(seccomp_actions_avail)];
struct ctl_table table;
memset(names, 0, sizeof(names));
if (!seccomp_names_from_actions_logged(names, sizeof(names),
seccomp_actions_logged, " "))
return -EINVAL;
table = *ro_table;
table.data = names;
table.maxlen = sizeof(names);
return proc_dostring(&table, 0, buffer, lenp, ppos);
}
static int write_actions_logged(struct ctl_table *ro_table, void *buffer,
seccomp: Audit attempts to modify the actions_logged sysctl The decision to log a seccomp action will always be subject to the value of the kernel.seccomp.actions_logged sysctl, even for processes that are being inspected via the audit subsystem, in an upcoming patch. Therefore, we need to emit an audit record on attempts at writing to the actions_logged sysctl when auditing is enabled. This patch updates the write handler for the actions_logged sysctl to emit an audit record on attempts to write to the sysctl. Successful writes to the sysctl will result in a record that includes a normalized list of logged actions in the "actions" field and a "res" field equal to 1. Unsuccessful writes to the sysctl will result in a record that doesn't include the "actions" field and has a "res" field equal to 0. Not all unsuccessful writes to the sysctl are audited. For example, an audit record will not be emitted if an unprivileged process attempts to open the sysctl file for reading since that access control check is not part of the sysctl's write handler. Below are some example audit records when writing various strings to the actions_logged sysctl. Writing "not-a-real-action", when the kernel.seccomp.actions_logged sysctl previously was "kill_process kill_thread trap errno trace log", emits this audit record: type=CONFIG_CHANGE msg=audit(1525392371.454:120): op=seccomp-logging actions=? old-actions=kill_process,kill_thread,trap,errno,trace,log res=0 If you then write "kill_process kill_thread errno trace log", this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392401.645:126): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,trap,errno,trace,log res=1 If you then write "log log errno trace kill_process kill_thread", which is unordered and contains the log action twice, it results in the same actions value as the previous record: type=CONFIG_CHANGE msg=audit(1525392436.354:132): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,errno,trace,log res=1 If you then write an empty string to the sysctl, this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392494.413:138): op=seccomp-logging actions=(none) old-actions=kill_process,kill_thread,errno,trace,log res=1 No audit records are generated when reading the actions_logged sysctl. Suggested-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-04 01:08:14 +00:00
size_t *lenp, loff_t *ppos, u32 *actions_logged)
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
{
char names[sizeof(seccomp_actions_avail)];
struct ctl_table table;
int ret;
if (!capable(CAP_SYS_ADMIN))
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
return -EPERM;
memset(names, 0, sizeof(names));
table = *ro_table;
table.data = names;
table.maxlen = sizeof(names);
ret = proc_dostring(&table, 1, buffer, lenp, ppos);
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
if (ret)
return ret;
seccomp: Audit attempts to modify the actions_logged sysctl The decision to log a seccomp action will always be subject to the value of the kernel.seccomp.actions_logged sysctl, even for processes that are being inspected via the audit subsystem, in an upcoming patch. Therefore, we need to emit an audit record on attempts at writing to the actions_logged sysctl when auditing is enabled. This patch updates the write handler for the actions_logged sysctl to emit an audit record on attempts to write to the sysctl. Successful writes to the sysctl will result in a record that includes a normalized list of logged actions in the "actions" field and a "res" field equal to 1. Unsuccessful writes to the sysctl will result in a record that doesn't include the "actions" field and has a "res" field equal to 0. Not all unsuccessful writes to the sysctl are audited. For example, an audit record will not be emitted if an unprivileged process attempts to open the sysctl file for reading since that access control check is not part of the sysctl's write handler. Below are some example audit records when writing various strings to the actions_logged sysctl. Writing "not-a-real-action", when the kernel.seccomp.actions_logged sysctl previously was "kill_process kill_thread trap errno trace log", emits this audit record: type=CONFIG_CHANGE msg=audit(1525392371.454:120): op=seccomp-logging actions=? old-actions=kill_process,kill_thread,trap,errno,trace,log res=0 If you then write "kill_process kill_thread errno trace log", this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392401.645:126): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,trap,errno,trace,log res=1 If you then write "log log errno trace kill_process kill_thread", which is unordered and contains the log action twice, it results in the same actions value as the previous record: type=CONFIG_CHANGE msg=audit(1525392436.354:132): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,errno,trace,log res=1 If you then write an empty string to the sysctl, this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392494.413:138): op=seccomp-logging actions=(none) old-actions=kill_process,kill_thread,errno,trace,log res=1 No audit records are generated when reading the actions_logged sysctl. Suggested-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-04 01:08:14 +00:00
if (!seccomp_actions_logged_from_names(actions_logged, table.data))
return -EINVAL;
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
seccomp: Audit attempts to modify the actions_logged sysctl The decision to log a seccomp action will always be subject to the value of the kernel.seccomp.actions_logged sysctl, even for processes that are being inspected via the audit subsystem, in an upcoming patch. Therefore, we need to emit an audit record on attempts at writing to the actions_logged sysctl when auditing is enabled. This patch updates the write handler for the actions_logged sysctl to emit an audit record on attempts to write to the sysctl. Successful writes to the sysctl will result in a record that includes a normalized list of logged actions in the "actions" field and a "res" field equal to 1. Unsuccessful writes to the sysctl will result in a record that doesn't include the "actions" field and has a "res" field equal to 0. Not all unsuccessful writes to the sysctl are audited. For example, an audit record will not be emitted if an unprivileged process attempts to open the sysctl file for reading since that access control check is not part of the sysctl's write handler. Below are some example audit records when writing various strings to the actions_logged sysctl. Writing "not-a-real-action", when the kernel.seccomp.actions_logged sysctl previously was "kill_process kill_thread trap errno trace log", emits this audit record: type=CONFIG_CHANGE msg=audit(1525392371.454:120): op=seccomp-logging actions=? old-actions=kill_process,kill_thread,trap,errno,trace,log res=0 If you then write "kill_process kill_thread errno trace log", this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392401.645:126): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,trap,errno,trace,log res=1 If you then write "log log errno trace kill_process kill_thread", which is unordered and contains the log action twice, it results in the same actions value as the previous record: type=CONFIG_CHANGE msg=audit(1525392436.354:132): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,errno,trace,log res=1 If you then write an empty string to the sysctl, this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392494.413:138): op=seccomp-logging actions=(none) old-actions=kill_process,kill_thread,errno,trace,log res=1 No audit records are generated when reading the actions_logged sysctl. Suggested-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-04 01:08:14 +00:00
if (*actions_logged & SECCOMP_LOG_ALLOW)
return -EINVAL;
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
seccomp: Audit attempts to modify the actions_logged sysctl The decision to log a seccomp action will always be subject to the value of the kernel.seccomp.actions_logged sysctl, even for processes that are being inspected via the audit subsystem, in an upcoming patch. Therefore, we need to emit an audit record on attempts at writing to the actions_logged sysctl when auditing is enabled. This patch updates the write handler for the actions_logged sysctl to emit an audit record on attempts to write to the sysctl. Successful writes to the sysctl will result in a record that includes a normalized list of logged actions in the "actions" field and a "res" field equal to 1. Unsuccessful writes to the sysctl will result in a record that doesn't include the "actions" field and has a "res" field equal to 0. Not all unsuccessful writes to the sysctl are audited. For example, an audit record will not be emitted if an unprivileged process attempts to open the sysctl file for reading since that access control check is not part of the sysctl's write handler. Below are some example audit records when writing various strings to the actions_logged sysctl. Writing "not-a-real-action", when the kernel.seccomp.actions_logged sysctl previously was "kill_process kill_thread trap errno trace log", emits this audit record: type=CONFIG_CHANGE msg=audit(1525392371.454:120): op=seccomp-logging actions=? old-actions=kill_process,kill_thread,trap,errno,trace,log res=0 If you then write "kill_process kill_thread errno trace log", this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392401.645:126): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,trap,errno,trace,log res=1 If you then write "log log errno trace kill_process kill_thread", which is unordered and contains the log action twice, it results in the same actions value as the previous record: type=CONFIG_CHANGE msg=audit(1525392436.354:132): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,errno,trace,log res=1 If you then write an empty string to the sysctl, this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392494.413:138): op=seccomp-logging actions=(none) old-actions=kill_process,kill_thread,errno,trace,log res=1 No audit records are generated when reading the actions_logged sysctl. Suggested-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-04 01:08:14 +00:00
seccomp_actions_logged = *actions_logged;
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
return 0;
}
seccomp: Audit attempts to modify the actions_logged sysctl The decision to log a seccomp action will always be subject to the value of the kernel.seccomp.actions_logged sysctl, even for processes that are being inspected via the audit subsystem, in an upcoming patch. Therefore, we need to emit an audit record on attempts at writing to the actions_logged sysctl when auditing is enabled. This patch updates the write handler for the actions_logged sysctl to emit an audit record on attempts to write to the sysctl. Successful writes to the sysctl will result in a record that includes a normalized list of logged actions in the "actions" field and a "res" field equal to 1. Unsuccessful writes to the sysctl will result in a record that doesn't include the "actions" field and has a "res" field equal to 0. Not all unsuccessful writes to the sysctl are audited. For example, an audit record will not be emitted if an unprivileged process attempts to open the sysctl file for reading since that access control check is not part of the sysctl's write handler. Below are some example audit records when writing various strings to the actions_logged sysctl. Writing "not-a-real-action", when the kernel.seccomp.actions_logged sysctl previously was "kill_process kill_thread trap errno trace log", emits this audit record: type=CONFIG_CHANGE msg=audit(1525392371.454:120): op=seccomp-logging actions=? old-actions=kill_process,kill_thread,trap,errno,trace,log res=0 If you then write "kill_process kill_thread errno trace log", this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392401.645:126): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,trap,errno,trace,log res=1 If you then write "log log errno trace kill_process kill_thread", which is unordered and contains the log action twice, it results in the same actions value as the previous record: type=CONFIG_CHANGE msg=audit(1525392436.354:132): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,errno,trace,log res=1 If you then write an empty string to the sysctl, this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392494.413:138): op=seccomp-logging actions=(none) old-actions=kill_process,kill_thread,errno,trace,log res=1 No audit records are generated when reading the actions_logged sysctl. Suggested-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-04 01:08:14 +00:00
static void audit_actions_logged(u32 actions_logged, u32 old_actions_logged,
int ret)
{
char names[sizeof(seccomp_actions_avail)];
char old_names[sizeof(seccomp_actions_avail)];
const char *new = names;
const char *old = old_names;
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
seccomp: Audit attempts to modify the actions_logged sysctl The decision to log a seccomp action will always be subject to the value of the kernel.seccomp.actions_logged sysctl, even for processes that are being inspected via the audit subsystem, in an upcoming patch. Therefore, we need to emit an audit record on attempts at writing to the actions_logged sysctl when auditing is enabled. This patch updates the write handler for the actions_logged sysctl to emit an audit record on attempts to write to the sysctl. Successful writes to the sysctl will result in a record that includes a normalized list of logged actions in the "actions" field and a "res" field equal to 1. Unsuccessful writes to the sysctl will result in a record that doesn't include the "actions" field and has a "res" field equal to 0. Not all unsuccessful writes to the sysctl are audited. For example, an audit record will not be emitted if an unprivileged process attempts to open the sysctl file for reading since that access control check is not part of the sysctl's write handler. Below are some example audit records when writing various strings to the actions_logged sysctl. Writing "not-a-real-action", when the kernel.seccomp.actions_logged sysctl previously was "kill_process kill_thread trap errno trace log", emits this audit record: type=CONFIG_CHANGE msg=audit(1525392371.454:120): op=seccomp-logging actions=? old-actions=kill_process,kill_thread,trap,errno,trace,log res=0 If you then write "kill_process kill_thread errno trace log", this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392401.645:126): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,trap,errno,trace,log res=1 If you then write "log log errno trace kill_process kill_thread", which is unordered and contains the log action twice, it results in the same actions value as the previous record: type=CONFIG_CHANGE msg=audit(1525392436.354:132): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,errno,trace,log res=1 If you then write an empty string to the sysctl, this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392494.413:138): op=seccomp-logging actions=(none) old-actions=kill_process,kill_thread,errno,trace,log res=1 No audit records are generated when reading the actions_logged sysctl. Suggested-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-04 01:08:14 +00:00
if (!audit_enabled)
return;
memset(names, 0, sizeof(names));
memset(old_names, 0, sizeof(old_names));
if (ret)
new = "?";
else if (!actions_logged)
new = "(none)";
else if (!seccomp_names_from_actions_logged(names, sizeof(names),
actions_logged, ","))
new = "?";
if (!old_actions_logged)
old = "(none)";
else if (!seccomp_names_from_actions_logged(old_names,
sizeof(old_names),
old_actions_logged, ","))
old = "?";
return audit_seccomp_actions_logged(new, old, !ret);
}
static int seccomp_actions_logged_handler(struct ctl_table *ro_table, int write,
void *buffer, size_t *lenp,
loff_t *ppos)
{
seccomp: Audit attempts to modify the actions_logged sysctl The decision to log a seccomp action will always be subject to the value of the kernel.seccomp.actions_logged sysctl, even for processes that are being inspected via the audit subsystem, in an upcoming patch. Therefore, we need to emit an audit record on attempts at writing to the actions_logged sysctl when auditing is enabled. This patch updates the write handler for the actions_logged sysctl to emit an audit record on attempts to write to the sysctl. Successful writes to the sysctl will result in a record that includes a normalized list of logged actions in the "actions" field and a "res" field equal to 1. Unsuccessful writes to the sysctl will result in a record that doesn't include the "actions" field and has a "res" field equal to 0. Not all unsuccessful writes to the sysctl are audited. For example, an audit record will not be emitted if an unprivileged process attempts to open the sysctl file for reading since that access control check is not part of the sysctl's write handler. Below are some example audit records when writing various strings to the actions_logged sysctl. Writing "not-a-real-action", when the kernel.seccomp.actions_logged sysctl previously was "kill_process kill_thread trap errno trace log", emits this audit record: type=CONFIG_CHANGE msg=audit(1525392371.454:120): op=seccomp-logging actions=? old-actions=kill_process,kill_thread,trap,errno,trace,log res=0 If you then write "kill_process kill_thread errno trace log", this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392401.645:126): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,trap,errno,trace,log res=1 If you then write "log log errno trace kill_process kill_thread", which is unordered and contains the log action twice, it results in the same actions value as the previous record: type=CONFIG_CHANGE msg=audit(1525392436.354:132): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,errno,trace,log res=1 If you then write an empty string to the sysctl, this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392494.413:138): op=seccomp-logging actions=(none) old-actions=kill_process,kill_thread,errno,trace,log res=1 No audit records are generated when reading the actions_logged sysctl. Suggested-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-04 01:08:14 +00:00
int ret;
if (write) {
u32 actions_logged = 0;
u32 old_actions_logged = seccomp_actions_logged;
ret = write_actions_logged(ro_table, buffer, lenp, ppos,
&actions_logged);
audit_actions_logged(actions_logged, old_actions_logged, ret);
} else
ret = read_actions_logged(ro_table, buffer, lenp, ppos);
return ret;
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
}
static struct ctl_path seccomp_sysctl_path[] = {
{ .procname = "kernel", },
{ .procname = "seccomp", },
{ }
};
static struct ctl_table seccomp_sysctl_table[] = {
{
.procname = "actions_avail",
.data = (void *) &seccomp_actions_avail,
.maxlen = sizeof(seccomp_actions_avail),
.mode = 0444,
.proc_handler = proc_dostring,
},
seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-11 04:33:54 +00:00
{
.procname = "actions_logged",
.mode = 0644,
.proc_handler = seccomp_actions_logged_handler,
},
{ }
};
static int __init seccomp_sysctl_init(void)
{
struct ctl_table_header *hdr;
hdr = register_sysctl_paths(seccomp_sysctl_path, seccomp_sysctl_table);
if (!hdr)
pr_warn("sysctl registration failed\n");
else
kmemleak_not_leak(hdr);
return 0;
}
device_initcall(seccomp_sysctl_init)
#endif /* CONFIG_SYSCTL */
seccomp/cache: Report cache data through /proc/pid/seccomp_cache Currently the kernel does not provide an infrastructure to translate architecture numbers to a human-readable name. Translating syscall numbers to syscall names is possible through FTRACE_SYSCALL infrastructure but it does not provide support for compat syscalls. This will create a file for each PID as /proc/pid/seccomp_cache. The file will be empty when no seccomp filters are loaded, or be in the format of: <arch name> <decimal syscall number> <ALLOW | FILTER> where ALLOW means the cache is guaranteed to allow the syscall, and filter means the cache will pass the syscall to the BPF filter. For the docker default profile on x86_64 it looks like: x86_64 0 ALLOW x86_64 1 ALLOW x86_64 2 ALLOW x86_64 3 ALLOW [...] x86_64 132 ALLOW x86_64 133 ALLOW x86_64 134 FILTER x86_64 135 FILTER x86_64 136 FILTER x86_64 137 ALLOW x86_64 138 ALLOW x86_64 139 FILTER x86_64 140 ALLOW x86_64 141 ALLOW [...] This file is guarded by CONFIG_SECCOMP_CACHE_DEBUG with a default of N because I think certain users of seccomp might not want the application to know which syscalls are definitely usable. For the same reason, it is also guarded by CAP_SYS_ADMIN. Suggested-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/lkml/CAG48ez3Ofqp4crXGksLmZY6=fGrF_tWyUCg7PBkAetvbbOPeOA@mail.gmail.com/ Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/94e663fa53136f5a11f432c661794d1ee7060779.1605101222.git.yifeifz2@illinois.edu
2020-11-11 13:33:54 +00:00
#ifdef CONFIG_SECCOMP_CACHE_DEBUG
/* Currently CONFIG_SECCOMP_CACHE_DEBUG implies SECCOMP_ARCH_NATIVE */
static void proc_pid_seccomp_cache_arch(struct seq_file *m, const char *name,
const void *bitmap, size_t bitmap_size)
{
int nr;
for (nr = 0; nr < bitmap_size; nr++) {
bool cached = test_bit(nr, bitmap);
char *status = cached ? "ALLOW" : "FILTER";
seq_printf(m, "%s %d %s\n", name, nr, status);
}
}
int proc_pid_seccomp_cache(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task)
{
struct seccomp_filter *f;
unsigned long flags;
/*
* We don't want some sandboxed process to know what their seccomp
* filters consist of.
*/
if (!file_ns_capable(m->file, &init_user_ns, CAP_SYS_ADMIN))
return -EACCES;
if (!lock_task_sighand(task, &flags))
return -ESRCH;
f = READ_ONCE(task->seccomp.filter);
if (!f) {
unlock_task_sighand(task, &flags);
return 0;
}
/* prevent filter from being freed while we are printing it */
__get_seccomp_filter(f);
unlock_task_sighand(task, &flags);
proc_pid_seccomp_cache_arch(m, SECCOMP_ARCH_NATIVE_NAME,
f->cache.allow_native,
SECCOMP_ARCH_NATIVE_NR);
#ifdef SECCOMP_ARCH_COMPAT
proc_pid_seccomp_cache_arch(m, SECCOMP_ARCH_COMPAT_NAME,
f->cache.allow_compat,
SECCOMP_ARCH_COMPAT_NR);
#endif /* SECCOMP_ARCH_COMPAT */
__put_seccomp_filter(f);
return 0;
}
#endif /* CONFIG_SECCOMP_CACHE_DEBUG */