linux/kernel/bpf/verifier.c

5621 lines
163 KiB
C
Raw Normal View History

/* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
* Copyright (c) 2016 Facebook
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
* License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/bpf.h>
#include <linux/bpf_verifier.h>
#include <linux/filter.h>
#include <net/netlink.h>
#include <linux/file.h>
#include <linux/vmalloc.h>
#include <linux/stringify.h>
bpf: introduce function calls (function boundaries) Allow arbitrary function calls from bpf function to another bpf function. Since the beginning of bpf all bpf programs were represented as a single function and program authors were forced to use always_inline for all functions in their C code. That was causing llvm to unnecessary inflate the code size and forcing developers to move code to header files with little code reuse. With a bit of additional complexity teach verifier to recognize arbitrary function calls from one bpf function to another as long as all of functions are presented to the verifier as a single bpf program. New program layout: r6 = r1 // some code .. r1 = .. // arg1 r2 = .. // arg2 call pc+1 // function call pc-relative exit .. = r1 // access arg1 .. = r2 // access arg2 .. call pc+20 // second level of function call ... It allows for better optimized code and finally allows to introduce the core bpf libraries that can be reused in different projects, since programs are no longer limited by single elf file. With function calls bpf can be compiled into multiple .o files. This patch is the first step. It detects programs that contain multiple functions and checks that calls between them are valid. It splits the sequence of bpf instructions (one program) into a set of bpf functions that call each other. Calls to only known functions are allowed. In the future the verifier may allow calls to unresolved functions and will do dynamic linking. This logic supports statically linked bpf functions only. Such function boundary detection could have been done as part of control flow graph building in check_cfg(), but it's cleaner to separate function boundary detection vs control flow checks within a subprogram (function) into logically indepedent steps. Follow up patches may split check_cfg() further, but not check_subprogs(). Only allow bpf-to-bpf calls for root only and for non-hw-offloaded programs. These restrictions can be relaxed in the future. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:05 +00:00
#include <linux/bsearch.h>
#include <linux/sort.h>
#include "disasm.h"
static const struct bpf_verifier_ops * const bpf_verifier_ops[] = {
#define BPF_PROG_TYPE(_id, _name) \
[_id] = & _name ## _verifier_ops,
#define BPF_MAP_TYPE(_id, _ops)
#include <linux/bpf_types.h>
#undef BPF_PROG_TYPE
#undef BPF_MAP_TYPE
};
/* bpf_check() is a static code analyzer that walks eBPF program
* instruction by instruction and updates register/stack state.
* All paths of conditional branches are analyzed until 'bpf_exit' insn.
*
* The first pass is depth-first-search to check that the program is a DAG.
* It rejects the following programs:
* - larger than BPF_MAXINSNS insns
* - if loop is present (detected via back-edge)
* - unreachable insns exist (shouldn't be a forest. program = one function)
* - out of bounds or malformed jumps
* The second pass is all possible path descent from the 1st insn.
* Since it's analyzing all pathes through the program, the length of the
* analysis is limited to 64k insn, which may be hit even if total number of
* insn is less then 4K, but there are too many branches that change stack/regs.
* Number of 'branches to be analyzed' is limited to 1k
*
* On entry to each instruction, each register has a type, and the instruction
* changes the types of the registers depending on instruction semantics.
* If instruction is BPF_MOV64_REG(BPF_REG_1, BPF_REG_5), then type of R5 is
* copied to R1.
*
* All registers are 64-bit.
* R0 - return register
* R1-R5 argument passing registers
* R6-R9 callee saved registers
* R10 - frame pointer read-only
*
* At the start of BPF program the register R1 contains a pointer to bpf_context
* and has type PTR_TO_CTX.
*
* Verifier tracks arithmetic operations on pointers in case:
* BPF_MOV64_REG(BPF_REG_1, BPF_REG_10),
* BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -20),
* 1st insn copies R10 (which has FRAME_PTR) type into R1
* and 2nd arithmetic instruction is pattern matched to recognize
* that it wants to construct a pointer to some element within stack.
* So after 2nd insn, the register R1 has type PTR_TO_STACK
* (and -20 constant is saved for further stack bounds checking).
* Meaning that this reg is a pointer to stack plus known immediate constant.
*
* Most of the time the registers have SCALAR_VALUE type, which
* means the register has some value, but it's not a valid pointer.
* (like pointer plus pointer becomes SCALAR_VALUE type)
*
* When verifier sees load or store instructions the type of base register
* can be: PTR_TO_MAP_VALUE, PTR_TO_CTX, PTR_TO_STACK. These are three pointer
* types recognized by check_mem_access() function.
*
* PTR_TO_MAP_VALUE means that this register is pointing to 'map element value'
* and the range of [ptr, ptr + map's value_size) is accessible.
*
* registers used to pass values to function calls are checked against
* function argument constraints.
*
* ARG_PTR_TO_MAP_KEY is one of such argument constraints.
* It means that the register type passed to this function must be
* PTR_TO_STACK and it will be used inside the function as
* 'pointer to map element key'
*
* For example the argument constraints for bpf_map_lookup_elem():
* .ret_type = RET_PTR_TO_MAP_VALUE_OR_NULL,
* .arg1_type = ARG_CONST_MAP_PTR,
* .arg2_type = ARG_PTR_TO_MAP_KEY,
*
* ret_type says that this function returns 'pointer to map elem value or null'
* function expects 1st argument to be a const pointer to 'struct bpf_map' and
* 2nd argument should be a pointer to stack, which will be used inside
* the helper function as a pointer to map element key.
*
* On the kernel side the helper function looks like:
* u64 bpf_map_lookup_elem(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5)
* {
* struct bpf_map *map = (struct bpf_map *) (unsigned long) r1;
* void *key = (void *) (unsigned long) r2;
* void *value;
*
* here kernel can access 'key' and 'map' pointers safely, knowing that
* [key, key + map->key_size) bytes are valid and were initialized on
* the stack of eBPF program.
* }
*
* Corresponding eBPF program may look like:
* BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), // after this insn R2 type is FRAME_PTR
* BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -4), // after this insn R2 type is PTR_TO_STACK
* BPF_LD_MAP_FD(BPF_REG_1, map_fd), // after this insn R1 type is CONST_PTR_TO_MAP
* BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
* here verifier looks at prototype of map_lookup_elem() and sees:
* .arg1_type == ARG_CONST_MAP_PTR and R1->type == CONST_PTR_TO_MAP, which is ok,
* Now verifier knows that this map has key of R1->map_ptr->key_size bytes
*
* Then .arg2_type == ARG_PTR_TO_MAP_KEY and R2->type == PTR_TO_STACK, ok so far,
* Now verifier checks that [R2, R2 + map's key_size) are within stack limits
* and were initialized prior to this call.
* If it's ok, then verifier allows this BPF_CALL insn and looks at
* .ret_type which is RET_PTR_TO_MAP_VALUE_OR_NULL, so it sets
* R0->type = PTR_TO_MAP_VALUE_OR_NULL which means bpf_map_lookup_elem() function
* returns ether pointer to map value or NULL.
*
* When type PTR_TO_MAP_VALUE_OR_NULL passes through 'if (reg != 0) goto +off'
* insn, the register holding that pointer in the true branch changes state to
* PTR_TO_MAP_VALUE and the same register changes state to CONST_IMM in the false
* branch. See check_cond_jmp_op().
*
* After the call R0 is set to return type of the function and registers R1-R5
* are set to NOT_INIT to indicate that they are no longer readable.
*/
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* verifier_state + insn_idx are pushed to stack when branch is encountered */
struct bpf_verifier_stack_elem {
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* verifer state is 'st'
* before processing instruction 'insn_idx'
* and after processing instruction 'prev_insn_idx'
*/
struct bpf_verifier_state st;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
int insn_idx;
int prev_insn_idx;
struct bpf_verifier_stack_elem *next;
};
#define BPF_COMPLEXITY_LIMIT_INSNS 131072
bpf, verifier: further improve search pruning The verifier needs to go through every path of the program in order to check that it terminates safely, which can be quite a lot of instructions that need to be processed f.e. in cases with more branchy programs. With search pruning from f1bca824dabb ("bpf: add search pruning optimization to verifier") the search space can already be reduced significantly when the verifier detects that a previously walked path with same register and stack contents terminated already (see verifier's states_equal()), so the search can skip walking those states. When working with larger programs of > ~2000 (out of max 4096) insns, we found that the current limit of 32k instructions is easily hit. For example, a case we ran into is that the search space cannot be pruned due to branches at the beginning of the program that make use of certain stack space slots (STACK_MISC), which are never used in the remaining program (STACK_INVALID). Therefore, the verifier needs to walk paths for the slots in STACK_INVALID state, but also all remaining paths with a stack structure, where the slots are in STACK_MISC, which can nearly double the search space needed. After various experiments, we find that a limit of 64k processed insns is a more reasonable choice when dealing with larger programs in practice. This still allows to reject extreme crafted cases that can have a much higher complexity (f.e. > ~300k) within the 4096 insns limit due to search pruning not being able to take effect. Furthermore, we found that a lot of states can be pruned after a call instruction, f.e. we were able to reduce the search state by ~35% in some cases with this heuristic, trade-off is to keep a bit more states in env->explored_states. Usually, call instructions have a number of preceding register assignments and/or stack stores, where search pruning has a better chance to suceed in states_equal() test. The current code marks the branch targets with STATE_LIST_MARK in case of conditional jumps, and the next (t + 1) instruction in case of unconditional jump so that f.e. a backjump will walk it. We also did experiments with using t + insns[t].off + 1 as a marker in the unconditionally jump case instead of t + 1 with the rationale that these two branches of execution that converge after the label might have more potential of pruning. We found that it was a bit better, but not necessarily significantly better than the current state, perhaps also due to clang not generating back jumps often. Hence, we left that as is for now. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05 20:33:17 +00:00
#define BPF_COMPLEXITY_LIMIT_STACK 1024
#define BPF_MAP_PTR_POISON ((void *)0xeB9F + POISON_POINTER_DELTA)
struct bpf_call_arg_meta {
struct bpf_map *map_ptr;
bpf, verifier: add ARG_PTR_TO_RAW_STACK type When passing buffers from eBPF stack space into a helper function, we have ARG_PTR_TO_STACK argument type for helpers available. The verifier makes sure that such buffers are initialized, within boundaries, etc. However, the downside with this is that we have a couple of helper functions such as bpf_skb_load_bytes() that fill out the passed buffer in the expected success case anyway, so zero initializing them prior to the helper call is unneeded/wasted instructions in the eBPF program that can be avoided. Therefore, add a new helper function argument type called ARG_PTR_TO_RAW_STACK. The idea is to skip the STACK_MISC check in check_stack_boundary() and color the related stack slots as STACK_MISC after we checked all call arguments. Helper functions using ARG_PTR_TO_RAW_STACK must make sure that every path of the helper function will fill the provided buffer area, so that we cannot leak any uninitialized stack memory. This f.e. means that error paths need to memset() the buffers, but the expected fast-path doesn't have to do this anymore. Since there's no such helper needing more than at most one ARG_PTR_TO_RAW_STACK argument, we can keep it simple and don't need to check for multiple areas. Should in future such a use-case really appear, we have check_raw_mode() that will make sure we implement support for it first. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-12 22:10:51 +00:00
bool raw_mode;
bpf: direct packet write and access for helpers for clsact progs This work implements direct packet access for helpers and direct packet write in a similar fashion as already available for XDP types via commits 4acf6c0b84c9 ("bpf: enable direct packet data write for xdp progs") and 6841de8b0d03 ("bpf: allow helpers access the packet directly"), and as a complementary feature to the already available direct packet read for tc (cls/act) programs. For enabling this, we need to introduce two helpers, bpf_skb_pull_data() and bpf_csum_update(). The first is generally needed for both, read and write, because they would otherwise only be limited to the current linear skb head. Usually, when the data_end test fails, programs just bail out, or, in the direct read case, use bpf_skb_load_bytes() as an alternative to overcome this limitation. If such data sits in non-linear parts, we can just pull them in once with the new helper, retest and eventually access them. At the same time, this also makes sure the skb is uncloned, which is, of course, a necessary condition for direct write. As this needs to be an invariant for the write part only, the verifier detects writes and adds a prologue that is calling bpf_skb_pull_data() to effectively unclone the skb from the very beginning in case it is indeed cloned. The heuristic makes use of a similar trick that was done in 233577a22089 ("net: filter: constify detection of pkt_type_offset"). This comes at zero cost for other programs that do not use the direct write feature. Should a program use this feature only sparsely and has read access for the most parts with, for example, drop return codes, then such write action can be delegated to a tail called program for mitigating this cost of potential uncloning to a late point in time where it would have been paid similarly with the bpf_skb_store_bytes() as well. Advantage of direct write is that the writes are inlined whereas the helper cannot make any length assumptions and thus needs to generate a call to memcpy() also for small sizes, as well as cost of helper call itself with sanity checks are avoided. Plus, when direct read is already used, we don't need to cache or perform rechecks on the data boundaries (due to verifier invalidating previous checks for helpers that change skb->data), so more complex programs using rewrites can benefit from switching to direct read plus write. For direct packet access to helpers, we save the otherwise needed copy into a temp struct sitting on stack memory when use-case allows. Both facilities are enabled via may_access_direct_pkt_data() in verifier. For now, we limit this to map helpers and csum_diff, and can successively enable other helpers where we find it makes sense. Helpers that definitely cannot be allowed for this are those part of bpf_helper_changes_skb_data() since they can change underlying data, and those that write into memory as this could happen for packet typed args when still cloned. bpf_csum_update() helper accommodates for the fact that we need to fixup checksum_complete when using direct write instead of bpf_skb_store_bytes(), meaning the programs can use available helpers like bpf_csum_diff(), and implement csum_add(), csum_sub(), csum_block_add(), csum_block_sub() equivalents in eBPF together with the new helper. A usage example will be provided for iproute2's examples/bpf/ directory. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 22:26:13 +00:00
bool pkt_access;
bpf, verifier: add ARG_PTR_TO_RAW_STACK type When passing buffers from eBPF stack space into a helper function, we have ARG_PTR_TO_STACK argument type for helpers available. The verifier makes sure that such buffers are initialized, within boundaries, etc. However, the downside with this is that we have a couple of helper functions such as bpf_skb_load_bytes() that fill out the passed buffer in the expected success case anyway, so zero initializing them prior to the helper call is unneeded/wasted instructions in the eBPF program that can be avoided. Therefore, add a new helper function argument type called ARG_PTR_TO_RAW_STACK. The idea is to skip the STACK_MISC check in check_stack_boundary() and color the related stack slots as STACK_MISC after we checked all call arguments. Helper functions using ARG_PTR_TO_RAW_STACK must make sure that every path of the helper function will fill the provided buffer area, so that we cannot leak any uninitialized stack memory. This f.e. means that error paths need to memset() the buffers, but the expected fast-path doesn't have to do this anymore. Since there's no such helper needing more than at most one ARG_PTR_TO_RAW_STACK argument, we can keep it simple and don't need to check for multiple areas. Should in future such a use-case really appear, we have check_raw_mode() that will make sure we implement support for it first. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-12 22:10:51 +00:00
int regno;
int access_size;
};
static DEFINE_MUTEX(bpf_verifier_lock);
/* log_level controls verbosity level of eBPF verifier.
* bpf_verifier_log_write() is used to dump the verification trace to the log,
* so the user can figure out what's wrong with the program
*/
__printf(2, 3) void bpf_verifier_log_write(struct bpf_verifier_env *env,
const char *fmt, ...)
{
struct bpf_verifer_log *log = &env->log;
unsigned int n;
va_list args;
if (!log->level || !log->ubuf || bpf_verifier_log_full(log))
return;
va_start(args, fmt);
n = vscnprintf(log->kbuf, BPF_VERIFIER_TMP_LOG_SIZE, fmt, args);
va_end(args);
WARN_ONCE(n >= BPF_VERIFIER_TMP_LOG_SIZE - 1,
"verifier log line truncated - local buffer too short\n");
n = min(log->len_total - log->len_used - 1, n);
log->kbuf[n] = '\0';
if (!copy_to_user(log->ubuf + log->len_used, log->kbuf, n + 1))
log->len_used += n;
else
log->ubuf = NULL;
}
EXPORT_SYMBOL_GPL(bpf_verifier_log_write);
/* Historically bpf_verifier_log_write was called verbose, but the name was too
* generic for symbol export. The function was renamed, but not the calls in
* the verifier to avoid complicating backports. Hence the alias below.
*/
static __printf(2, 3) void verbose(struct bpf_verifier_env *env,
const char *fmt, ...)
__attribute__((alias("bpf_verifier_log_write")));
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
static bool type_is_pkt_pointer(enum bpf_reg_type type)
{
return type == PTR_TO_PACKET ||
type == PTR_TO_PACKET_META;
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* string representation of 'enum bpf_reg_type' */
static const char * const reg_type_str[] = {
[NOT_INIT] = "?",
[SCALAR_VALUE] = "inv",
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
[PTR_TO_CTX] = "ctx",
[CONST_PTR_TO_MAP] = "map_ptr",
[PTR_TO_MAP_VALUE] = "map_value",
[PTR_TO_MAP_VALUE_OR_NULL] = "map_value_or_null",
[PTR_TO_STACK] = "fp",
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
[PTR_TO_PACKET] = "pkt",
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
[PTR_TO_PACKET_META] = "pkt_meta",
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
[PTR_TO_PACKET_END] = "pkt_end",
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
};
static void print_liveness(struct bpf_verifier_env *env,
enum bpf_reg_liveness live)
{
if (live & (REG_LIVE_READ | REG_LIVE_WRITTEN))
verbose(env, "_");
if (live & REG_LIVE_READ)
verbose(env, "r");
if (live & REG_LIVE_WRITTEN)
verbose(env, "w");
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
static struct bpf_func_state *func(struct bpf_verifier_env *env,
const struct bpf_reg_state *reg)
{
struct bpf_verifier_state *cur = env->cur_state;
return cur->frame[reg->frameno];
}
static void print_verifier_state(struct bpf_verifier_env *env,
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
const struct bpf_func_state *state)
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
{
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
const struct bpf_reg_state *reg;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
enum bpf_reg_type t;
int i;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
if (state->frameno)
verbose(env, " frame%d:", state->frameno);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
for (i = 0; i < MAX_BPF_REG; i++) {
reg = &state->regs[i];
t = reg->type;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (t == NOT_INIT)
continue;
verbose(env, " R%d", i);
print_liveness(env, reg->live);
verbose(env, "=%s", reg_type_str[t]);
if ((t == SCALAR_VALUE || t == PTR_TO_STACK) &&
tnum_is_const(reg->var_off)) {
/* reg->off should be 0 for SCALAR_VALUE */
verbose(env, "%lld", reg->var_off.value + reg->off);
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
if (t == PTR_TO_STACK)
verbose(env, ",call_%d", func(env, reg)->callsite);
} else {
verbose(env, "(id=%d", reg->id);
if (t != SCALAR_VALUE)
verbose(env, ",off=%d", reg->off);
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
if (type_is_pkt_pointer(t))
verbose(env, ",r=%d", reg->range);
else if (t == CONST_PTR_TO_MAP ||
t == PTR_TO_MAP_VALUE ||
t == PTR_TO_MAP_VALUE_OR_NULL)
verbose(env, ",ks=%d,vs=%d",
reg->map_ptr->key_size,
reg->map_ptr->value_size);
if (tnum_is_const(reg->var_off)) {
/* Typically an immediate SCALAR_VALUE, but
* could be a pointer whose offset is too big
* for reg->off
*/
verbose(env, ",imm=%llx", reg->var_off.value);
} else {
if (reg->smin_value != reg->umin_value &&
reg->smin_value != S64_MIN)
verbose(env, ",smin_value=%lld",
(long long)reg->smin_value);
if (reg->smax_value != reg->umax_value &&
reg->smax_value != S64_MAX)
verbose(env, ",smax_value=%lld",
(long long)reg->smax_value);
if (reg->umin_value != 0)
verbose(env, ",umin_value=%llu",
(unsigned long long)reg->umin_value);
if (reg->umax_value != U64_MAX)
verbose(env, ",umax_value=%llu",
(unsigned long long)reg->umax_value);
if (!tnum_is_unknown(reg->var_off)) {
char tn_buf[48];
tnum_strn(tn_buf, sizeof(tn_buf), reg->var_off);
verbose(env, ",var_off=%s", tn_buf);
}
}
verbose(env, ")");
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
for (i = 0; i < state->allocated_stack / BPF_REG_SIZE; i++) {
if (state->stack[i].slot_type[0] == STACK_SPILL) {
verbose(env, " fp%d",
(-i - 1) * BPF_REG_SIZE);
print_liveness(env, state->stack[i].spilled_ptr.live);
verbose(env, "=%s",
reg_type_str[state->stack[i].spilled_ptr.type]);
}
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
if (state->stack[i].slot_type[0] == STACK_ZERO)
verbose(env, " fp%d=0", (-i - 1) * BPF_REG_SIZE);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
verbose(env, "\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
static int copy_stack_state(struct bpf_func_state *dst,
const struct bpf_func_state *src)
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
{
if (!src->stack)
return 0;
if (WARN_ON_ONCE(dst->allocated_stack < src->allocated_stack)) {
/* internal bug, make state invalid to reject the program */
memset(dst, 0, sizeof(*dst));
return -EFAULT;
}
memcpy(dst->stack, src->stack,
sizeof(*src->stack) * (src->allocated_stack / BPF_REG_SIZE));
return 0;
}
/* do_check() starts with zero-sized stack in struct bpf_verifier_state to
* make it consume minimal amount of memory. check_stack_write() access from
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
* the program calls into realloc_func_state() to grow the stack size.
* Note there is a non-zero 'parent' pointer inside bpf_verifier_state
* which this function copies over. It points to previous bpf_verifier_state
* which is never reallocated
*/
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
static int realloc_func_state(struct bpf_func_state *state, int size,
bool copy_old)
{
u32 old_size = state->allocated_stack;
struct bpf_stack_state *new_stack;
int slot = size / BPF_REG_SIZE;
if (size <= old_size || !size) {
if (copy_old)
return 0;
state->allocated_stack = slot * BPF_REG_SIZE;
if (!size && old_size) {
kfree(state->stack);
state->stack = NULL;
}
return 0;
}
new_stack = kmalloc_array(slot, sizeof(struct bpf_stack_state),
GFP_KERNEL);
if (!new_stack)
return -ENOMEM;
if (copy_old) {
if (state->stack)
memcpy(new_stack, state->stack,
sizeof(*new_stack) * (old_size / BPF_REG_SIZE));
memset(new_stack + old_size / BPF_REG_SIZE, 0,
sizeof(*new_stack) * (size - old_size) / BPF_REG_SIZE);
}
state->allocated_stack = slot * BPF_REG_SIZE;
kfree(state->stack);
state->stack = new_stack;
return 0;
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
static void free_func_state(struct bpf_func_state *state)
{
if (!state)
return;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
kfree(state->stack);
kfree(state);
}
static void free_verifier_state(struct bpf_verifier_state *state,
bool free_self)
{
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
int i;
for (i = 0; i <= state->curframe; i++) {
free_func_state(state->frame[i]);
state->frame[i] = NULL;
}
if (free_self)
kfree(state);
}
/* copy verifier state from src to dst growing dst stack space
* when necessary to accommodate larger src stack
*/
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
static int copy_func_state(struct bpf_func_state *dst,
const struct bpf_func_state *src)
{
int err;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
err = realloc_func_state(dst, src->allocated_stack, false);
if (err)
return err;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
memcpy(dst, src, offsetof(struct bpf_func_state, allocated_stack));
return copy_stack_state(dst, src);
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
static int copy_verifier_state(struct bpf_verifier_state *dst_state,
const struct bpf_verifier_state *src)
{
struct bpf_func_state *dst;
int i, err;
/* if dst has more stack frames then src frame, free them */
for (i = src->curframe + 1; i <= dst_state->curframe; i++) {
free_func_state(dst_state->frame[i]);
dst_state->frame[i] = NULL;
}
dst_state->curframe = src->curframe;
dst_state->parent = src->parent;
for (i = 0; i <= src->curframe; i++) {
dst = dst_state->frame[i];
if (!dst) {
dst = kzalloc(sizeof(*dst), GFP_KERNEL);
if (!dst)
return -ENOMEM;
dst_state->frame[i] = dst;
}
err = copy_func_state(dst, src->frame[i]);
if (err)
return err;
}
return 0;
}
static int pop_stack(struct bpf_verifier_env *env, int *prev_insn_idx,
int *insn_idx)
{
struct bpf_verifier_state *cur = env->cur_state;
struct bpf_verifier_stack_elem *elem, *head = env->head;
int err;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (env->head == NULL)
return -ENOENT;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (cur) {
err = copy_verifier_state(cur, &head->st);
if (err)
return err;
}
if (insn_idx)
*insn_idx = head->insn_idx;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (prev_insn_idx)
*prev_insn_idx = head->prev_insn_idx;
elem = head->next;
free_verifier_state(&head->st, false);
kfree(head);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
env->head = elem;
env->stack_size--;
return 0;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
static struct bpf_verifier_state *push_stack(struct bpf_verifier_env *env,
int insn_idx, int prev_insn_idx)
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
{
struct bpf_verifier_state *cur = env->cur_state;
struct bpf_verifier_stack_elem *elem;
int err;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
elem = kzalloc(sizeof(struct bpf_verifier_stack_elem), GFP_KERNEL);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (!elem)
goto err;
elem->insn_idx = insn_idx;
elem->prev_insn_idx = prev_insn_idx;
elem->next = env->head;
env->head = elem;
env->stack_size++;
err = copy_verifier_state(&elem->st, cur);
if (err)
goto err;
bpf, verifier: further improve search pruning The verifier needs to go through every path of the program in order to check that it terminates safely, which can be quite a lot of instructions that need to be processed f.e. in cases with more branchy programs. With search pruning from f1bca824dabb ("bpf: add search pruning optimization to verifier") the search space can already be reduced significantly when the verifier detects that a previously walked path with same register and stack contents terminated already (see verifier's states_equal()), so the search can skip walking those states. When working with larger programs of > ~2000 (out of max 4096) insns, we found that the current limit of 32k instructions is easily hit. For example, a case we ran into is that the search space cannot be pruned due to branches at the beginning of the program that make use of certain stack space slots (STACK_MISC), which are never used in the remaining program (STACK_INVALID). Therefore, the verifier needs to walk paths for the slots in STACK_INVALID state, but also all remaining paths with a stack structure, where the slots are in STACK_MISC, which can nearly double the search space needed. After various experiments, we find that a limit of 64k processed insns is a more reasonable choice when dealing with larger programs in practice. This still allows to reject extreme crafted cases that can have a much higher complexity (f.e. > ~300k) within the 4096 insns limit due to search pruning not being able to take effect. Furthermore, we found that a lot of states can be pruned after a call instruction, f.e. we were able to reduce the search state by ~35% in some cases with this heuristic, trade-off is to keep a bit more states in env->explored_states. Usually, call instructions have a number of preceding register assignments and/or stack stores, where search pruning has a better chance to suceed in states_equal() test. The current code marks the branch targets with STATE_LIST_MARK in case of conditional jumps, and the next (t + 1) instruction in case of unconditional jump so that f.e. a backjump will walk it. We also did experiments with using t + insns[t].off + 1 as a marker in the unconditionally jump case instead of t + 1 with the rationale that these two branches of execution that converge after the label might have more potential of pruning. We found that it was a bit better, but not necessarily significantly better than the current state, perhaps also due to clang not generating back jumps often. Hence, we left that as is for now. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05 20:33:17 +00:00
if (env->stack_size > BPF_COMPLEXITY_LIMIT_STACK) {
verbose(env, "BPF program is too complex\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
goto err;
}
return &elem->st;
err:
free_verifier_state(env->cur_state, true);
env->cur_state = NULL;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* pop all elements and return */
while (!pop_stack(env, NULL, NULL));
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return NULL;
}
#define CALLER_SAVED_REGS 6
static const int caller_saved[CALLER_SAVED_REGS] = {
BPF_REG_0, BPF_REG_1, BPF_REG_2, BPF_REG_3, BPF_REG_4, BPF_REG_5
};
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
#define CALLEE_SAVED_REGS 5
static const int callee_saved[CALLEE_SAVED_REGS] = {
BPF_REG_6, BPF_REG_7, BPF_REG_8, BPF_REG_9
};
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
static void __mark_reg_not_init(struct bpf_reg_state *reg);
/* Mark the unknown part of a register (variable offset or scalar value) as
* known to have the value @imm.
*/
static void __mark_reg_known(struct bpf_reg_state *reg, u64 imm)
{
reg->id = 0;
reg->var_off = tnum_const(imm);
reg->smin_value = (s64)imm;
reg->smax_value = (s64)imm;
reg->umin_value = imm;
reg->umax_value = imm;
}
/* Mark the 'variable offset' part of a register as zero. This should be
* used only on registers holding a pointer type.
*/
static void __mark_reg_known_zero(struct bpf_reg_state *reg)
{
__mark_reg_known(reg, 0);
}
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
static void __mark_reg_const_zero(struct bpf_reg_state *reg)
{
__mark_reg_known(reg, 0);
reg->off = 0;
reg->type = SCALAR_VALUE;
}
static void mark_reg_known_zero(struct bpf_verifier_env *env,
struct bpf_reg_state *regs, u32 regno)
{
if (WARN_ON(regno >= MAX_BPF_REG)) {
verbose(env, "mark_reg_known_zero(regs, %u)\n", regno);
/* Something bad happened, let's kill all regs */
for (regno = 0; regno < MAX_BPF_REG; regno++)
__mark_reg_not_init(regs + regno);
return;
}
__mark_reg_known_zero(regs + regno);
}
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
static bool reg_is_pkt_pointer(const struct bpf_reg_state *reg)
{
return type_is_pkt_pointer(reg->type);
}
static bool reg_is_pkt_pointer_any(const struct bpf_reg_state *reg)
{
return reg_is_pkt_pointer(reg) ||
reg->type == PTR_TO_PACKET_END;
}
/* Unmodified PTR_TO_PACKET[_META,_END] register from ctx access. */
static bool reg_is_init_pkt_pointer(const struct bpf_reg_state *reg,
enum bpf_reg_type which)
{
/* The register can already have a range from prior markings.
* This is fine as long as it hasn't been advanced from its
* origin.
*/
return reg->type == which &&
reg->id == 0 &&
reg->off == 0 &&
tnum_equals_const(reg->var_off, 0);
}
/* Attempts to improve min/max values based on var_off information */
static void __update_reg_bounds(struct bpf_reg_state *reg)
{
/* min signed is max(sign bit) | min(other bits) */
reg->smin_value = max_t(s64, reg->smin_value,
reg->var_off.value | (reg->var_off.mask & S64_MIN));
/* max signed is min(sign bit) | max(other bits) */
reg->smax_value = min_t(s64, reg->smax_value,
reg->var_off.value | (reg->var_off.mask & S64_MAX));
reg->umin_value = max(reg->umin_value, reg->var_off.value);
reg->umax_value = min(reg->umax_value,
reg->var_off.value | reg->var_off.mask);
}
/* Uses signed min/max values to inform unsigned, and vice-versa */
static void __reg_deduce_bounds(struct bpf_reg_state *reg)
{
/* Learn sign from signed bounds.
* If we cannot cross the sign boundary, then signed and unsigned bounds
* are the same, so combine. This works even in the negative case, e.g.
* -3 s<= x s<= -1 implies 0xf...fd u<= x u<= 0xf...ff.
*/
if (reg->smin_value >= 0 || reg->smax_value < 0) {
reg->smin_value = reg->umin_value = max_t(u64, reg->smin_value,
reg->umin_value);
reg->smax_value = reg->umax_value = min_t(u64, reg->smax_value,
reg->umax_value);
return;
}
/* Learn sign from unsigned bounds. Signed bounds cross the sign
* boundary, so we must be careful.
*/
if ((s64)reg->umax_value >= 0) {
/* Positive. We can't learn anything from the smin, but smax
* is positive, hence safe.
*/
reg->smin_value = reg->umin_value;
reg->smax_value = reg->umax_value = min_t(u64, reg->smax_value,
reg->umax_value);
} else if ((s64)reg->umin_value < 0) {
/* Negative. We can't learn anything from the smax, but smin
* is negative, hence safe.
*/
reg->smin_value = reg->umin_value = max_t(u64, reg->smin_value,
reg->umin_value);
reg->smax_value = reg->umax_value;
}
}
/* Attempts to improve var_off based on unsigned min/max information */
static void __reg_bound_offset(struct bpf_reg_state *reg)
{
reg->var_off = tnum_intersect(reg->var_off,
tnum_range(reg->umin_value,
reg->umax_value));
}
/* Reset the min/max bounds of a register */
static void __mark_reg_unbounded(struct bpf_reg_state *reg)
{
reg->smin_value = S64_MIN;
reg->smax_value = S64_MAX;
reg->umin_value = 0;
reg->umax_value = U64_MAX;
}
/* Mark a register as having a completely unknown (scalar) value. */
static void __mark_reg_unknown(struct bpf_reg_state *reg)
{
reg->type = SCALAR_VALUE;
reg->id = 0;
reg->off = 0;
reg->var_off = tnum_unknown;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
reg->frameno = 0;
__mark_reg_unbounded(reg);
}
static void mark_reg_unknown(struct bpf_verifier_env *env,
struct bpf_reg_state *regs, u32 regno)
{
if (WARN_ON(regno >= MAX_BPF_REG)) {
verbose(env, "mark_reg_unknown(regs, %u)\n", regno);
/* Something bad happened, let's kill all regs except FP */
for (regno = 0; regno < BPF_REG_FP; regno++)
__mark_reg_not_init(regs + regno);
return;
}
__mark_reg_unknown(regs + regno);
}
static void __mark_reg_not_init(struct bpf_reg_state *reg)
{
__mark_reg_unknown(reg);
reg->type = NOT_INIT;
}
static void mark_reg_not_init(struct bpf_verifier_env *env,
struct bpf_reg_state *regs, u32 regno)
{
if (WARN_ON(regno >= MAX_BPF_REG)) {
verbose(env, "mark_reg_not_init(regs, %u)\n", regno);
/* Something bad happened, let's kill all regs except FP */
for (regno = 0; regno < BPF_REG_FP; regno++)
__mark_reg_not_init(regs + regno);
return;
}
__mark_reg_not_init(regs + regno);
}
static void init_reg_state(struct bpf_verifier_env *env,
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
struct bpf_func_state *state)
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
{
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
struct bpf_reg_state *regs = state->regs;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
int i;
for (i = 0; i < MAX_BPF_REG; i++) {
mark_reg_not_init(env, regs, i);
regs[i].live = REG_LIVE_NONE;
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* frame pointer */
regs[BPF_REG_FP].type = PTR_TO_STACK;
mark_reg_known_zero(env, regs, BPF_REG_FP);
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
regs[BPF_REG_FP].frameno = state->frameno;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* 1st arg to a function */
regs[BPF_REG_1].type = PTR_TO_CTX;
mark_reg_known_zero(env, regs, BPF_REG_1);
bpf: fix mark_reg_unknown_value for spilled regs on map value marking Martin reported a verifier issue that hit the BUG_ON() for his test case in the mark_reg_unknown_value() function: [ 202.861380] kernel BUG at kernel/bpf/verifier.c:467! [...] [ 203.291109] Call Trace: [ 203.296501] [<ffffffff811364d5>] mark_map_reg+0x45/0x50 [ 203.308225] [<ffffffff81136558>] mark_map_regs+0x78/0x90 [ 203.320140] [<ffffffff8113938d>] do_check+0x226d/0x2c90 [ 203.331865] [<ffffffff8113a6ab>] bpf_check+0x48b/0x780 [ 203.343403] [<ffffffff81134c8e>] bpf_prog_load+0x27e/0x440 [ 203.355705] [<ffffffff8118a38f>] ? handle_mm_fault+0x11af/0x1230 [ 203.369158] [<ffffffff812d8188>] ? security_capable+0x48/0x60 [ 203.382035] [<ffffffff811351a4>] SyS_bpf+0x124/0x960 [ 203.393185] [<ffffffff810515f6>] ? __do_page_fault+0x276/0x490 [ 203.406258] [<ffffffff816db320>] entry_SYSCALL_64_fastpath+0x13/0x94 This issue got uncovered after the fix in a08dd0da5307 ("bpf: fix regression on verifier pruning wrt map lookups"). The reason why it wasn't noticed before was, because as mentioned in a08dd0da5307, mark_map_regs() was doing the id matching incorrectly based on the uncached regs[regno].id. So, in the first loop, we walked all regs and as soon as we found regno == i, then this reg's id was cleared when calling mark_reg_unknown_value() thus that every subsequent register was probed against id of 0 (which, in combination with the PTR_TO_MAP_VALUE_OR_NULL type is an invalid condition that no other register state can hold), and therefore wasn't type transitioned such as in the spilled register case for the second loop. Now since that got fixed, it turned out that 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers") used mark_reg_unknown_value() incorrectly for the spilled regs, and thus hitting the BUG_ON() in some cases due to regno >= MAX_BPF_REG. Although spilled regs have the same type as the non-spilled regs for the verifier state, that is, struct bpf_reg_state, they are semantically different from the non-spilled regs. In other words, there can be up to 64 (MAX_BPF_STACK / BPF_REG_SIZE) spilled regs in the stack, for example, register R<x> could have been spilled by the program to stack location X, Y, Z, and in mark_map_regs() we need to scan these stack slots of type STACK_SPILL for potential registers that we have to transition from PTR_TO_MAP_VALUE_OR_NULL. Therefore, depending on the location, the spilled_regs regno can be a lot higher than just MAX_BPF_REG's value since we operate on stack instead. The reset in mark_reg_unknown_value() itself is just fine, only that the BUG_ON() was inappropriate for this. Fix it by making a __mark_reg_unknown_value() version that can be called from mark_map_reg() generically; we know for the non-spilled case that the regno is always < MAX_BPF_REG anyway. Fixes: 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers") Reported-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-18 00:52:59 +00:00
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
#define BPF_MAIN_FUNC (-1)
static void init_func_state(struct bpf_verifier_env *env,
struct bpf_func_state *state,
int callsite, int frameno, int subprogno)
{
state->callsite = callsite;
state->frameno = frameno;
state->subprogno = subprogno;
init_reg_state(env, state);
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
enum reg_arg_type {
SRC_OP, /* register is used as source operand */
DST_OP, /* register is used as destination operand */
DST_OP_NO_MARK /* same as above, check only, don't mark */
};
bpf: introduce function calls (function boundaries) Allow arbitrary function calls from bpf function to another bpf function. Since the beginning of bpf all bpf programs were represented as a single function and program authors were forced to use always_inline for all functions in their C code. That was causing llvm to unnecessary inflate the code size and forcing developers to move code to header files with little code reuse. With a bit of additional complexity teach verifier to recognize arbitrary function calls from one bpf function to another as long as all of functions are presented to the verifier as a single bpf program. New program layout: r6 = r1 // some code .. r1 = .. // arg1 r2 = .. // arg2 call pc+1 // function call pc-relative exit .. = r1 // access arg1 .. = r2 // access arg2 .. call pc+20 // second level of function call ... It allows for better optimized code and finally allows to introduce the core bpf libraries that can be reused in different projects, since programs are no longer limited by single elf file. With function calls bpf can be compiled into multiple .o files. This patch is the first step. It detects programs that contain multiple functions and checks that calls between them are valid. It splits the sequence of bpf instructions (one program) into a set of bpf functions that call each other. Calls to only known functions are allowed. In the future the verifier may allow calls to unresolved functions and will do dynamic linking. This logic supports statically linked bpf functions only. Such function boundary detection could have been done as part of control flow graph building in check_cfg(), but it's cleaner to separate function boundary detection vs control flow checks within a subprogram (function) into logically indepedent steps. Follow up patches may split check_cfg() further, but not check_subprogs(). Only allow bpf-to-bpf calls for root only and for non-hw-offloaded programs. These restrictions can be relaxed in the future. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:05 +00:00
static int cmp_subprogs(const void *a, const void *b)
{
return *(int *)a - *(int *)b;
}
static int find_subprog(struct bpf_verifier_env *env, int off)
{
u32 *p;
p = bsearch(&off, env->subprog_starts, env->subprog_cnt,
sizeof(env->subprog_starts[0]), cmp_subprogs);
if (!p)
return -ENOENT;
return p - env->subprog_starts;
}
static int add_subprog(struct bpf_verifier_env *env, int off)
{
int insn_cnt = env->prog->len;
int ret;
if (off >= insn_cnt || off < 0) {
verbose(env, "call to invalid destination\n");
return -EINVAL;
}
ret = find_subprog(env, off);
if (ret >= 0)
return 0;
if (env->subprog_cnt >= BPF_MAX_SUBPROGS) {
verbose(env, "too many subprograms\n");
return -E2BIG;
}
env->subprog_starts[env->subprog_cnt++] = off;
sort(env->subprog_starts, env->subprog_cnt,
sizeof(env->subprog_starts[0]), cmp_subprogs, NULL);
return 0;
}
static int check_subprogs(struct bpf_verifier_env *env)
{
int i, ret, subprog_start, subprog_end, off, cur_subprog = 0;
struct bpf_insn *insn = env->prog->insnsi;
int insn_cnt = env->prog->len;
/* determine subprog starts. The end is one before the next starts */
for (i = 0; i < insn_cnt; i++) {
if (insn[i].code != (BPF_JMP | BPF_CALL))
continue;
if (insn[i].src_reg != BPF_PSEUDO_CALL)
continue;
if (!env->allow_ptr_leaks) {
verbose(env, "function calls to other bpf functions are allowed for root only\n");
return -EPERM;
}
if (bpf_prog_is_dev_bound(env->prog->aux)) {
verbose(env, "function calls in offloaded programs are not supported yet\n");
bpf: introduce function calls (function boundaries) Allow arbitrary function calls from bpf function to another bpf function. Since the beginning of bpf all bpf programs were represented as a single function and program authors were forced to use always_inline for all functions in their C code. That was causing llvm to unnecessary inflate the code size and forcing developers to move code to header files with little code reuse. With a bit of additional complexity teach verifier to recognize arbitrary function calls from one bpf function to another as long as all of functions are presented to the verifier as a single bpf program. New program layout: r6 = r1 // some code .. r1 = .. // arg1 r2 = .. // arg2 call pc+1 // function call pc-relative exit .. = r1 // access arg1 .. = r2 // access arg2 .. call pc+20 // second level of function call ... It allows for better optimized code and finally allows to introduce the core bpf libraries that can be reused in different projects, since programs are no longer limited by single elf file. With function calls bpf can be compiled into multiple .o files. This patch is the first step. It detects programs that contain multiple functions and checks that calls between them are valid. It splits the sequence of bpf instructions (one program) into a set of bpf functions that call each other. Calls to only known functions are allowed. In the future the verifier may allow calls to unresolved functions and will do dynamic linking. This logic supports statically linked bpf functions only. Such function boundary detection could have been done as part of control flow graph building in check_cfg(), but it's cleaner to separate function boundary detection vs control flow checks within a subprogram (function) into logically indepedent steps. Follow up patches may split check_cfg() further, but not check_subprogs(). Only allow bpf-to-bpf calls for root only and for non-hw-offloaded programs. These restrictions can be relaxed in the future. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:05 +00:00
return -EINVAL;
}
ret = add_subprog(env, i + insn[i].imm + 1);
if (ret < 0)
return ret;
}
if (env->log.level > 1)
for (i = 0; i < env->subprog_cnt; i++)
verbose(env, "func#%d @%d\n", i, env->subprog_starts[i]);
/* now check that all jumps are within the same subprog */
subprog_start = 0;
if (env->subprog_cnt == cur_subprog)
subprog_end = insn_cnt;
else
subprog_end = env->subprog_starts[cur_subprog++];
for (i = 0; i < insn_cnt; i++) {
u8 code = insn[i].code;
if (BPF_CLASS(code) != BPF_JMP)
goto next;
if (BPF_OP(code) == BPF_EXIT || BPF_OP(code) == BPF_CALL)
goto next;
off = i + insn[i].off + 1;
if (off < subprog_start || off >= subprog_end) {
verbose(env, "jump out of range from insn %d to %d\n", i, off);
return -EINVAL;
}
next:
if (i == subprog_end - 1) {
/* to avoid fall-through from one subprog into another
* the last insn of the subprog should be either exit
* or unconditional jump back
*/
if (code != (BPF_JMP | BPF_EXIT) &&
code != (BPF_JMP | BPF_JA)) {
verbose(env, "last insn is not an exit or jmp\n");
return -EINVAL;
}
subprog_start = subprog_end;
if (env->subprog_cnt == cur_subprog)
subprog_end = insn_cnt;
else
subprog_end = env->subprog_starts[cur_subprog++];
}
}
return 0;
}
static
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
struct bpf_verifier_state *skip_callee(struct bpf_verifier_env *env,
const struct bpf_verifier_state *state,
struct bpf_verifier_state *parent,
u32 regno)
{
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
struct bpf_verifier_state *tmp = NULL;
/* 'parent' could be a state of caller and
* 'state' could be a state of callee. In such case
* parent->curframe < state->curframe
* and it's ok for r1 - r5 registers
*
* 'parent' could be a callee's state after it bpf_exit-ed.
* In such case parent->curframe > state->curframe
* and it's ok for r0 only
*/
if (parent->curframe == state->curframe ||
(parent->curframe < state->curframe &&
regno >= BPF_REG_1 && regno <= BPF_REG_5) ||
(parent->curframe > state->curframe &&
regno == BPF_REG_0))
return parent;
if (parent->curframe > state->curframe &&
regno >= BPF_REG_6) {
/* for callee saved regs we have to skip the whole chain
* of states that belong to callee and mark as LIVE_READ
* the registers before the call
*/
tmp = parent;
while (tmp && tmp->curframe != state->curframe) {
tmp = tmp->parent;
}
if (!tmp)
goto bug;
parent = tmp;
} else {
goto bug;
}
return parent;
bug:
verbose(env, "verifier bug regno %d tmp %p\n", regno, tmp);
verbose(env, "regno %d parent frame %d current frame %d\n",
regno, parent->curframe, state->curframe);
return NULL;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
}
static int mark_reg_read(struct bpf_verifier_env *env,
const struct bpf_verifier_state *state,
struct bpf_verifier_state *parent,
u32 regno)
{
bool writes = parent == state->parent; /* Observe write marks */
if (regno == BPF_REG_FP)
/* We don't need to worry about FP liveness because it's read-only */
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
return 0;
while (parent) {
/* if read wasn't screened by an earlier write ... */
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
if (writes && state->frame[state->curframe]->regs[regno].live & REG_LIVE_WRITTEN)
break;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
parent = skip_callee(env, state, parent, regno);
if (!parent)
return -EFAULT;
/* ... then we depend on parent's value */
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
parent->frame[parent->curframe]->regs[regno].live |= REG_LIVE_READ;
state = parent;
parent = state->parent;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
writes = true;
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
return 0;
}
static int check_reg_arg(struct bpf_verifier_env *env, u32 regno,
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
enum reg_arg_type t)
{
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
struct bpf_verifier_state *vstate = env->cur_state;
struct bpf_func_state *state = vstate->frame[vstate->curframe];
struct bpf_reg_state *regs = state->regs;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (regno >= MAX_BPF_REG) {
verbose(env, "R%d is invalid\n", regno);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
if (t == SRC_OP) {
/* check whether register used as source operand can be read */
if (regs[regno].type == NOT_INIT) {
verbose(env, "R%d !read_ok\n", regno);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EACCES;
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
return mark_reg_read(env, vstate, vstate->parent, regno);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
} else {
/* check whether register used as dest operand can be written to */
if (regno == BPF_REG_FP) {
verbose(env, "frame pointer is read only\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EACCES;
}
regs[regno].live |= REG_LIVE_WRITTEN;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (t == DST_OP)
mark_reg_unknown(env, regs, regno);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
return 0;
}
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
static bool is_spillable_regtype(enum bpf_reg_type type)
{
switch (type) {
case PTR_TO_MAP_VALUE:
case PTR_TO_MAP_VALUE_OR_NULL:
case PTR_TO_STACK:
case PTR_TO_CTX:
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
case PTR_TO_PACKET:
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
case PTR_TO_PACKET_META:
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
case PTR_TO_PACKET_END:
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
case CONST_PTR_TO_MAP:
return true;
default:
return false;
}
}
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
/* Does this register contain a constant zero? */
static bool register_is_null(struct bpf_reg_state *reg)
{
return reg->type == SCALAR_VALUE && tnum_equals_const(reg->var_off, 0);
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* check_stack_read/write functions track spill/fill of registers,
* stack boundary and alignment are checked in check_mem_access()
*/
static int check_stack_write(struct bpf_verifier_env *env,
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
struct bpf_func_state *state, /* func where register points to */
int off, int size, int value_regno)
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
{
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
struct bpf_func_state *cur; /* state of the current function */
int i, slot = -off - 1, spi = slot / BPF_REG_SIZE, err;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
enum bpf_reg_type type;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
err = realloc_func_state(state, round_up(slot + 1, BPF_REG_SIZE),
true);
if (err)
return err;
/* caller checked that off % size == 0 and -MAX_BPF_STACK <= off < 0,
* so it's aligned access and [off, off + size) are within stack limits
*/
if (!env->allow_ptr_leaks &&
state->stack[spi].slot_type[0] == STACK_SPILL &&
size != BPF_REG_SIZE) {
verbose(env, "attempt to corrupt spilled pointer on stack\n");
return -EACCES;
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
cur = env->cur_state->frame[env->cur_state->curframe];
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (value_regno >= 0 &&
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
is_spillable_regtype((type = cur->regs[value_regno].type))) {
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* register containing pointer is being spilled into stack */
if (size != BPF_REG_SIZE) {
verbose(env, "invalid size of register spill\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EACCES;
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
if (state != cur && type == PTR_TO_STACK) {
verbose(env, "cannot spill pointers to stack into stack frame of the caller\n");
return -EINVAL;
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* save register state */
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
state->stack[spi].spilled_ptr = cur->regs[value_regno];
state->stack[spi].spilled_ptr.live |= REG_LIVE_WRITTEN;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
for (i = 0; i < BPF_REG_SIZE; i++)
state->stack[spi].slot_type[i] = STACK_SPILL;
} else {
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
u8 type = STACK_MISC;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* regular write of data into stack */
state->stack[spi].spilled_ptr = (struct bpf_reg_state) {};
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
/* only mark the slot as written if all 8 bytes were written
* otherwise read propagation may incorrectly stop too soon
* when stack slots are partially written.
* This heuristic means that read propagation will be
* conservative, since it will add reg_live_read marks
* to stack slots all the way to first state when programs
* writes+reads less than 8 bytes
*/
if (size == BPF_REG_SIZE)
state->stack[spi].spilled_ptr.live |= REG_LIVE_WRITTEN;
/* when we zero initialize stack slots mark them as such */
if (value_regno >= 0 &&
register_is_null(&cur->regs[value_regno]))
type = STACK_ZERO;
for (i = 0; i < size; i++)
state->stack[spi].slot_type[(slot - i) % BPF_REG_SIZE] =
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
type;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
return 0;
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
/* registers of every function are unique and mark_reg_read() propagates
* the liveness in the following cases:
* - from callee into caller for R1 - R5 that were used as arguments
* - from caller into callee for R0 that used as result of the call
* - from caller to the same caller skipping states of the callee for R6 - R9,
* since R6 - R9 are callee saved by implicit function prologue and
* caller's R6 != callee's R6, so when we propagate liveness up to
* parent states we need to skip callee states for R6 - R9.
*
* stack slot marking is different, since stacks of caller and callee are
* accessible in both (since caller can pass a pointer to caller's stack to
* callee which can pass it to another function), hence mark_stack_slot_read()
* has to propagate the stack liveness to all parent states at given frame number.
* Consider code:
* f1() {
* ptr = fp - 8;
* *ptr = ctx;
* call f2 {
* .. = *ptr;
* }
* .. = *ptr;
* }
* First *ptr is reading from f1's stack and mark_stack_slot_read() has
* to mark liveness at the f1's frame and not f2's frame.
* Second *ptr is also reading from f1's stack and mark_stack_slot_read() has
* to propagate liveness to f2 states at f1's frame level and further into
* f1 states at f1's frame level until write into that stack slot
*/
static void mark_stack_slot_read(struct bpf_verifier_env *env,
const struct bpf_verifier_state *state,
struct bpf_verifier_state *parent,
int slot, int frameno)
{
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
bool writes = parent == state->parent; /* Observe write marks */
while (parent) {
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
if (parent->frame[frameno]->allocated_stack <= slot * BPF_REG_SIZE)
/* since LIVE_WRITTEN mark is only done for full 8-byte
* write the read marks are conservative and parent
* state may not even have the stack allocated. In such case
* end the propagation, since the loop reached beginning
* of the function
*/
break;
/* if read wasn't screened by an earlier write ... */
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
if (writes && state->frame[frameno]->stack[slot].spilled_ptr.live & REG_LIVE_WRITTEN)
break;
/* ... then we depend on parent's value */
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
parent->frame[frameno]->stack[slot].spilled_ptr.live |= REG_LIVE_READ;
state = parent;
parent = state->parent;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
writes = true;
}
}
static int check_stack_read(struct bpf_verifier_env *env,
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
struct bpf_func_state *reg_state /* func where register points to */,
int off, int size, int value_regno)
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
{
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
struct bpf_verifier_state *vstate = env->cur_state;
struct bpf_func_state *state = vstate->frame[vstate->curframe];
int i, slot = -off - 1, spi = slot / BPF_REG_SIZE;
u8 *stype;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
if (reg_state->allocated_stack <= slot) {
verbose(env, "invalid read from stack off %d+0 size %d\n",
off, size);
return -EACCES;
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
stype = reg_state->stack[spi].slot_type;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (stype[0] == STACK_SPILL) {
if (size != BPF_REG_SIZE) {
verbose(env, "invalid size of register spill\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EACCES;
}
for (i = 1; i < BPF_REG_SIZE; i++) {
if (stype[(slot - i) % BPF_REG_SIZE] != STACK_SPILL) {
verbose(env, "corrupted spill memory\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EACCES;
}
}
if (value_regno >= 0) {
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* restore register state from stack */
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
state->regs[value_regno] = reg_state->stack[spi].spilled_ptr;
/* mark reg as written since spilled pointer state likely
* has its liveness marks cleared by is_state_visited()
* which resets stack/reg liveness for state transitions
*/
state->regs[value_regno].live |= REG_LIVE_WRITTEN;
}
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
mark_stack_slot_read(env, vstate, vstate->parent, spi,
reg_state->frameno);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return 0;
} else {
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
int zeros = 0;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
for (i = 0; i < size; i++) {
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
if (stype[(slot - i) % BPF_REG_SIZE] == STACK_MISC)
continue;
if (stype[(slot - i) % BPF_REG_SIZE] == STACK_ZERO) {
zeros++;
continue;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
verbose(env, "invalid read from stack off %d+%d size %d\n",
off, i, size);
return -EACCES;
}
mark_stack_slot_read(env, vstate, vstate->parent, spi,
reg_state->frameno);
if (value_regno >= 0) {
if (zeros == size) {
/* any size read into register is zero extended,
* so the whole register == const_zero
*/
__mark_reg_const_zero(&state->regs[value_regno]);
} else {
/* have read misc data from the stack */
mark_reg_unknown(env, state->regs, value_regno);
}
state->regs[value_regno].live |= REG_LIVE_WRITTEN;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
return 0;
}
}
/* check read/write into map element returned by bpf_map_lookup_elem() */
static int __check_map_access(struct bpf_verifier_env *env, u32 regno, int off,
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the access size to be 0 when accessing the previous argument (arg). Right now, it requires the arg needs to be NULL when size passed is 0 or could be 0. It also requires a non-NULL arg when the size is proved to be non-0. This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior such that for size-0 or possible size-0, it is not required the arg equal to NULL. There are a couple of reasons for this semantics change, and all of them intends to simplify user bpf programs which may improve user experience and/or increase chances of verifier acceptance. Together with the next patch which changes bpf_probe_read arg2 type from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO, the following two examples, which fail the verifier currently, are able to get verifier acceptance. Example 1: unsigned long len = pend - pstart; len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len; len &= MAX_PAYLOAD_LEN; bpf_probe_read(data->payload, len, pstart); It does not have test for "len > 0" and it failed the verifier. Users may not be aware that they have to add this test. Converting the bpf_probe_read helper to have ARG_CONST_SIZE_OR_ZERO helps the above code get verifier acceptance. Example 2: Here is one example where llvm "messed up" the code and the verifier fails. ...... unsigned long len = pend - pstart; if (len > 0 && len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); ...... The compiler generates the following code and verifier fails: ...... 39: (79) r2 = *(u64 *)(r10 -16) 40: (1f) r2 -= r8 41: (bf) r1 = r2 42: (07) r1 += -1 43: (25) if r1 > 0xffe goto pc+3 R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff)) R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0) R8=inv(id=0) R9=inv0 R10=fp0 44: (bf) r1 = r6 45: (bf) r3 = r8 46: (85) call bpf_probe_read#45 R2 min value is negative, either use unsigned or 'var &= const' ...... The compiler optimization is correct. If r1 = 0, r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap. r1 > 0xffe at insn #43 can actually capture both "r1 > 0" and "len <= MAX_PAYLOAD_LEN". This however causes an issue in verifier as the value range of arg2 "r2" does not properly get refined and lead to verification failure. Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO allows the following simplied code: unsigned long len = pend - pstart; if (len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); The llvm compiler will generate less complex code and the verifier is able to verify that the program is okay. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12 22:49:09 +00:00
int size, bool zero_size_allowed)
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
{
struct bpf_reg_state *regs = cur_regs(env);
struct bpf_map *map = regs[regno].map_ptr;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the access size to be 0 when accessing the previous argument (arg). Right now, it requires the arg needs to be NULL when size passed is 0 or could be 0. It also requires a non-NULL arg when the size is proved to be non-0. This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior such that for size-0 or possible size-0, it is not required the arg equal to NULL. There are a couple of reasons for this semantics change, and all of them intends to simplify user bpf programs which may improve user experience and/or increase chances of verifier acceptance. Together with the next patch which changes bpf_probe_read arg2 type from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO, the following two examples, which fail the verifier currently, are able to get verifier acceptance. Example 1: unsigned long len = pend - pstart; len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len; len &= MAX_PAYLOAD_LEN; bpf_probe_read(data->payload, len, pstart); It does not have test for "len > 0" and it failed the verifier. Users may not be aware that they have to add this test. Converting the bpf_probe_read helper to have ARG_CONST_SIZE_OR_ZERO helps the above code get verifier acceptance. Example 2: Here is one example where llvm "messed up" the code and the verifier fails. ...... unsigned long len = pend - pstart; if (len > 0 && len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); ...... The compiler generates the following code and verifier fails: ...... 39: (79) r2 = *(u64 *)(r10 -16) 40: (1f) r2 -= r8 41: (bf) r1 = r2 42: (07) r1 += -1 43: (25) if r1 > 0xffe goto pc+3 R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff)) R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0) R8=inv(id=0) R9=inv0 R10=fp0 44: (bf) r1 = r6 45: (bf) r3 = r8 46: (85) call bpf_probe_read#45 R2 min value is negative, either use unsigned or 'var &= const' ...... The compiler optimization is correct. If r1 = 0, r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap. r1 > 0xffe at insn #43 can actually capture both "r1 > 0" and "len <= MAX_PAYLOAD_LEN". This however causes an issue in verifier as the value range of arg2 "r2" does not properly get refined and lead to verification failure. Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO allows the following simplied code: unsigned long len = pend - pstart; if (len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); The llvm compiler will generate less complex code and the verifier is able to verify that the program is okay. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12 22:49:09 +00:00
if (off < 0 || size < 0 || (size == 0 && !zero_size_allowed) ||
off + size > map->value_size) {
verbose(env, "invalid access to map value, value_size=%d off=%d size=%d\n",
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
map->value_size, off, size);
return -EACCES;
}
return 0;
}
/* check read/write into a map element with possible variable offset */
static int check_map_access(struct bpf_verifier_env *env, u32 regno,
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the access size to be 0 when accessing the previous argument (arg). Right now, it requires the arg needs to be NULL when size passed is 0 or could be 0. It also requires a non-NULL arg when the size is proved to be non-0. This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior such that for size-0 or possible size-0, it is not required the arg equal to NULL. There are a couple of reasons for this semantics change, and all of them intends to simplify user bpf programs which may improve user experience and/or increase chances of verifier acceptance. Together with the next patch which changes bpf_probe_read arg2 type from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO, the following two examples, which fail the verifier currently, are able to get verifier acceptance. Example 1: unsigned long len = pend - pstart; len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len; len &= MAX_PAYLOAD_LEN; bpf_probe_read(data->payload, len, pstart); It does not have test for "len > 0" and it failed the verifier. Users may not be aware that they have to add this test. Converting the bpf_probe_read helper to have ARG_CONST_SIZE_OR_ZERO helps the above code get verifier acceptance. Example 2: Here is one example where llvm "messed up" the code and the verifier fails. ...... unsigned long len = pend - pstart; if (len > 0 && len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); ...... The compiler generates the following code and verifier fails: ...... 39: (79) r2 = *(u64 *)(r10 -16) 40: (1f) r2 -= r8 41: (bf) r1 = r2 42: (07) r1 += -1 43: (25) if r1 > 0xffe goto pc+3 R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff)) R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0) R8=inv(id=0) R9=inv0 R10=fp0 44: (bf) r1 = r6 45: (bf) r3 = r8 46: (85) call bpf_probe_read#45 R2 min value is negative, either use unsigned or 'var &= const' ...... The compiler optimization is correct. If r1 = 0, r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap. r1 > 0xffe at insn #43 can actually capture both "r1 > 0" and "len <= MAX_PAYLOAD_LEN". This however causes an issue in verifier as the value range of arg2 "r2" does not properly get refined and lead to verification failure. Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO allows the following simplied code: unsigned long len = pend - pstart; if (len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); The llvm compiler will generate less complex code and the verifier is able to verify that the program is okay. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12 22:49:09 +00:00
int off, int size, bool zero_size_allowed)
{
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
struct bpf_verifier_state *vstate = env->cur_state;
struct bpf_func_state *state = vstate->frame[vstate->curframe];
struct bpf_reg_state *reg = &state->regs[regno];
int err;
/* We may have adjusted the register to this map value, so we
* need to try adding each of min_value and max_value to off
* to make sure our theoretical access will be safe.
*/
if (env->log.level)
print_verifier_state(env, state);
/* The minimum value is only important with signed
* comparisons where we can't assume the floor of a
* value is 0. If we are using signed variables for our
* index'es we need to make sure that whatever we use
* will have a set floor within our range.
*/
if (reg->smin_value < 0) {
verbose(env, "R%d min value is negative, either use unsigned index or do a if (index >=0) check.\n",
regno);
return -EACCES;
}
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the access size to be 0 when accessing the previous argument (arg). Right now, it requires the arg needs to be NULL when size passed is 0 or could be 0. It also requires a non-NULL arg when the size is proved to be non-0. This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior such that for size-0 or possible size-0, it is not required the arg equal to NULL. There are a couple of reasons for this semantics change, and all of them intends to simplify user bpf programs which may improve user experience and/or increase chances of verifier acceptance. Together with the next patch which changes bpf_probe_read arg2 type from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO, the following two examples, which fail the verifier currently, are able to get verifier acceptance. Example 1: unsigned long len = pend - pstart; len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len; len &= MAX_PAYLOAD_LEN; bpf_probe_read(data->payload, len, pstart); It does not have test for "len > 0" and it failed the verifier. Users may not be aware that they have to add this test. Converting the bpf_probe_read helper to have ARG_CONST_SIZE_OR_ZERO helps the above code get verifier acceptance. Example 2: Here is one example where llvm "messed up" the code and the verifier fails. ...... unsigned long len = pend - pstart; if (len > 0 && len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); ...... The compiler generates the following code and verifier fails: ...... 39: (79) r2 = *(u64 *)(r10 -16) 40: (1f) r2 -= r8 41: (bf) r1 = r2 42: (07) r1 += -1 43: (25) if r1 > 0xffe goto pc+3 R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff)) R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0) R8=inv(id=0) R9=inv0 R10=fp0 44: (bf) r1 = r6 45: (bf) r3 = r8 46: (85) call bpf_probe_read#45 R2 min value is negative, either use unsigned or 'var &= const' ...... The compiler optimization is correct. If r1 = 0, r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap. r1 > 0xffe at insn #43 can actually capture both "r1 > 0" and "len <= MAX_PAYLOAD_LEN". This however causes an issue in verifier as the value range of arg2 "r2" does not properly get refined and lead to verification failure. Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO allows the following simplied code: unsigned long len = pend - pstart; if (len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); The llvm compiler will generate less complex code and the verifier is able to verify that the program is okay. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12 22:49:09 +00:00
err = __check_map_access(env, regno, reg->smin_value + off, size,
zero_size_allowed);
if (err) {
verbose(env, "R%d min value is outside of the array range\n",
regno);
return err;
}
/* If we haven't set a max value then we need to bail since we can't be
* sure we won't do bad things.
* If reg->umax_value + off could overflow, treat that as unbounded too.
*/
if (reg->umax_value >= BPF_MAX_VAR_OFF) {
verbose(env, "R%d unbounded memory access, make sure to bounds check any array access into a map\n",
regno);
return -EACCES;
}
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the access size to be 0 when accessing the previous argument (arg). Right now, it requires the arg needs to be NULL when size passed is 0 or could be 0. It also requires a non-NULL arg when the size is proved to be non-0. This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior such that for size-0 or possible size-0, it is not required the arg equal to NULL. There are a couple of reasons for this semantics change, and all of them intends to simplify user bpf programs which may improve user experience and/or increase chances of verifier acceptance. Together with the next patch which changes bpf_probe_read arg2 type from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO, the following two examples, which fail the verifier currently, are able to get verifier acceptance. Example 1: unsigned long len = pend - pstart; len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len; len &= MAX_PAYLOAD_LEN; bpf_probe_read(data->payload, len, pstart); It does not have test for "len > 0" and it failed the verifier. Users may not be aware that they have to add this test. Converting the bpf_probe_read helper to have ARG_CONST_SIZE_OR_ZERO helps the above code get verifier acceptance. Example 2: Here is one example where llvm "messed up" the code and the verifier fails. ...... unsigned long len = pend - pstart; if (len > 0 && len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); ...... The compiler generates the following code and verifier fails: ...... 39: (79) r2 = *(u64 *)(r10 -16) 40: (1f) r2 -= r8 41: (bf) r1 = r2 42: (07) r1 += -1 43: (25) if r1 > 0xffe goto pc+3 R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff)) R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0) R8=inv(id=0) R9=inv0 R10=fp0 44: (bf) r1 = r6 45: (bf) r3 = r8 46: (85) call bpf_probe_read#45 R2 min value is negative, either use unsigned or 'var &= const' ...... The compiler optimization is correct. If r1 = 0, r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap. r1 > 0xffe at insn #43 can actually capture both "r1 > 0" and "len <= MAX_PAYLOAD_LEN". This however causes an issue in verifier as the value range of arg2 "r2" does not properly get refined and lead to verification failure. Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO allows the following simplied code: unsigned long len = pend - pstart; if (len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); The llvm compiler will generate less complex code and the verifier is able to verify that the program is okay. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12 22:49:09 +00:00
err = __check_map_access(env, regno, reg->umax_value + off, size,
zero_size_allowed);
if (err)
verbose(env, "R%d max value is outside of the array range\n",
regno);
return err;
}
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
#define MAX_PACKET_OFF 0xffff
static bool may_access_direct_pkt_data(struct bpf_verifier_env *env,
const struct bpf_call_arg_meta *meta,
enum bpf_access_type t)
{
bpf: direct packet write and access for helpers for clsact progs This work implements direct packet access for helpers and direct packet write in a similar fashion as already available for XDP types via commits 4acf6c0b84c9 ("bpf: enable direct packet data write for xdp progs") and 6841de8b0d03 ("bpf: allow helpers access the packet directly"), and as a complementary feature to the already available direct packet read for tc (cls/act) programs. For enabling this, we need to introduce two helpers, bpf_skb_pull_data() and bpf_csum_update(). The first is generally needed for both, read and write, because they would otherwise only be limited to the current linear skb head. Usually, when the data_end test fails, programs just bail out, or, in the direct read case, use bpf_skb_load_bytes() as an alternative to overcome this limitation. If such data sits in non-linear parts, we can just pull them in once with the new helper, retest and eventually access them. At the same time, this also makes sure the skb is uncloned, which is, of course, a necessary condition for direct write. As this needs to be an invariant for the write part only, the verifier detects writes and adds a prologue that is calling bpf_skb_pull_data() to effectively unclone the skb from the very beginning in case it is indeed cloned. The heuristic makes use of a similar trick that was done in 233577a22089 ("net: filter: constify detection of pkt_type_offset"). This comes at zero cost for other programs that do not use the direct write feature. Should a program use this feature only sparsely and has read access for the most parts with, for example, drop return codes, then such write action can be delegated to a tail called program for mitigating this cost of potential uncloning to a late point in time where it would have been paid similarly with the bpf_skb_store_bytes() as well. Advantage of direct write is that the writes are inlined whereas the helper cannot make any length assumptions and thus needs to generate a call to memcpy() also for small sizes, as well as cost of helper call itself with sanity checks are avoided. Plus, when direct read is already used, we don't need to cache or perform rechecks on the data boundaries (due to verifier invalidating previous checks for helpers that change skb->data), so more complex programs using rewrites can benefit from switching to direct read plus write. For direct packet access to helpers, we save the otherwise needed copy into a temp struct sitting on stack memory when use-case allows. Both facilities are enabled via may_access_direct_pkt_data() in verifier. For now, we limit this to map helpers and csum_diff, and can successively enable other helpers where we find it makes sense. Helpers that definitely cannot be allowed for this are those part of bpf_helper_changes_skb_data() since they can change underlying data, and those that write into memory as this could happen for packet typed args when still cloned. bpf_csum_update() helper accommodates for the fact that we need to fixup checksum_complete when using direct write instead of bpf_skb_store_bytes(), meaning the programs can use available helpers like bpf_csum_diff(), and implement csum_add(), csum_sub(), csum_block_add(), csum_block_sub() equivalents in eBPF together with the new helper. A usage example will be provided for iproute2's examples/bpf/ directory. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 22:26:13 +00:00
switch (env->prog->type) {
case BPF_PROG_TYPE_LWT_IN:
case BPF_PROG_TYPE_LWT_OUT:
/* dst_input() and dst_output() can't write for now */
if (t == BPF_WRITE)
return false;
bpf: reduce compiler warnings by adding fallthrough comments Fixes the following warnings: kernel/bpf/verifier.c: In function ‘may_access_direct_pkt_data’: kernel/bpf/verifier.c:702:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (t == BPF_WRITE) ^ kernel/bpf/verifier.c:704:2: note: here case BPF_PROG_TYPE_SCHED_CLS: ^~~~ kernel/bpf/verifier.c: In function ‘reg_set_min_max_inv’: kernel/bpf/verifier.c:2057:23: warning: this statement may fall through [-Wimplicit-fallthrough=] true_reg->min_value = 0; ~~~~~~~~~~~~~~~~~~~~^~~ kernel/bpf/verifier.c:2058:2: note: here case BPF_JSGT: ^~~~ kernel/bpf/verifier.c:2068:23: warning: this statement may fall through [-Wimplicit-fallthrough=] true_reg->min_value = 0; ~~~~~~~~~~~~~~~~~~~~^~~ kernel/bpf/verifier.c:2069:2: note: here case BPF_JSGE: ^~~~ kernel/bpf/verifier.c: In function ‘reg_set_min_max’: kernel/bpf/verifier.c:2009:24: warning: this statement may fall through [-Wimplicit-fallthrough=] false_reg->min_value = 0; ~~~~~~~~~~~~~~~~~~~~~^~~ kernel/bpf/verifier.c:2010:2: note: here case BPF_JSGT: ^~~~ kernel/bpf/verifier.c:2019:24: warning: this statement may fall through [-Wimplicit-fallthrough=] false_reg->min_value = 0; ~~~~~~~~~~~~~~~~~~~~~^~~ kernel/bpf/verifier.c:2020:2: note: here case BPF_JSGE: ^~~~ Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-13 23:02:35 +00:00
/* fallthrough */
bpf: direct packet write and access for helpers for clsact progs This work implements direct packet access for helpers and direct packet write in a similar fashion as already available for XDP types via commits 4acf6c0b84c9 ("bpf: enable direct packet data write for xdp progs") and 6841de8b0d03 ("bpf: allow helpers access the packet directly"), and as a complementary feature to the already available direct packet read for tc (cls/act) programs. For enabling this, we need to introduce two helpers, bpf_skb_pull_data() and bpf_csum_update(). The first is generally needed for both, read and write, because they would otherwise only be limited to the current linear skb head. Usually, when the data_end test fails, programs just bail out, or, in the direct read case, use bpf_skb_load_bytes() as an alternative to overcome this limitation. If such data sits in non-linear parts, we can just pull them in once with the new helper, retest and eventually access them. At the same time, this also makes sure the skb is uncloned, which is, of course, a necessary condition for direct write. As this needs to be an invariant for the write part only, the verifier detects writes and adds a prologue that is calling bpf_skb_pull_data() to effectively unclone the skb from the very beginning in case it is indeed cloned. The heuristic makes use of a similar trick that was done in 233577a22089 ("net: filter: constify detection of pkt_type_offset"). This comes at zero cost for other programs that do not use the direct write feature. Should a program use this feature only sparsely and has read access for the most parts with, for example, drop return codes, then such write action can be delegated to a tail called program for mitigating this cost of potential uncloning to a late point in time where it would have been paid similarly with the bpf_skb_store_bytes() as well. Advantage of direct write is that the writes are inlined whereas the helper cannot make any length assumptions and thus needs to generate a call to memcpy() also for small sizes, as well as cost of helper call itself with sanity checks are avoided. Plus, when direct read is already used, we don't need to cache or perform rechecks on the data boundaries (due to verifier invalidating previous checks for helpers that change skb->data), so more complex programs using rewrites can benefit from switching to direct read plus write. For direct packet access to helpers, we save the otherwise needed copy into a temp struct sitting on stack memory when use-case allows. Both facilities are enabled via may_access_direct_pkt_data() in verifier. For now, we limit this to map helpers and csum_diff, and can successively enable other helpers where we find it makes sense. Helpers that definitely cannot be allowed for this are those part of bpf_helper_changes_skb_data() since they can change underlying data, and those that write into memory as this could happen for packet typed args when still cloned. bpf_csum_update() helper accommodates for the fact that we need to fixup checksum_complete when using direct write instead of bpf_skb_store_bytes(), meaning the programs can use available helpers like bpf_csum_diff(), and implement csum_add(), csum_sub(), csum_block_add(), csum_block_sub() equivalents in eBPF together with the new helper. A usage example will be provided for iproute2's examples/bpf/ directory. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 22:26:13 +00:00
case BPF_PROG_TYPE_SCHED_CLS:
case BPF_PROG_TYPE_SCHED_ACT:
case BPF_PROG_TYPE_XDP:
case BPF_PROG_TYPE_LWT_XMIT:
case BPF_PROG_TYPE_SK_SKB:
bpf: direct packet write and access for helpers for clsact progs This work implements direct packet access for helpers and direct packet write in a similar fashion as already available for XDP types via commits 4acf6c0b84c9 ("bpf: enable direct packet data write for xdp progs") and 6841de8b0d03 ("bpf: allow helpers access the packet directly"), and as a complementary feature to the already available direct packet read for tc (cls/act) programs. For enabling this, we need to introduce two helpers, bpf_skb_pull_data() and bpf_csum_update(). The first is generally needed for both, read and write, because they would otherwise only be limited to the current linear skb head. Usually, when the data_end test fails, programs just bail out, or, in the direct read case, use bpf_skb_load_bytes() as an alternative to overcome this limitation. If such data sits in non-linear parts, we can just pull them in once with the new helper, retest and eventually access them. At the same time, this also makes sure the skb is uncloned, which is, of course, a necessary condition for direct write. As this needs to be an invariant for the write part only, the verifier detects writes and adds a prologue that is calling bpf_skb_pull_data() to effectively unclone the skb from the very beginning in case it is indeed cloned. The heuristic makes use of a similar trick that was done in 233577a22089 ("net: filter: constify detection of pkt_type_offset"). This comes at zero cost for other programs that do not use the direct write feature. Should a program use this feature only sparsely and has read access for the most parts with, for example, drop return codes, then such write action can be delegated to a tail called program for mitigating this cost of potential uncloning to a late point in time where it would have been paid similarly with the bpf_skb_store_bytes() as well. Advantage of direct write is that the writes are inlined whereas the helper cannot make any length assumptions and thus needs to generate a call to memcpy() also for small sizes, as well as cost of helper call itself with sanity checks are avoided. Plus, when direct read is already used, we don't need to cache or perform rechecks on the data boundaries (due to verifier invalidating previous checks for helpers that change skb->data), so more complex programs using rewrites can benefit from switching to direct read plus write. For direct packet access to helpers, we save the otherwise needed copy into a temp struct sitting on stack memory when use-case allows. Both facilities are enabled via may_access_direct_pkt_data() in verifier. For now, we limit this to map helpers and csum_diff, and can successively enable other helpers where we find it makes sense. Helpers that definitely cannot be allowed for this are those part of bpf_helper_changes_skb_data() since they can change underlying data, and those that write into memory as this could happen for packet typed args when still cloned. bpf_csum_update() helper accommodates for the fact that we need to fixup checksum_complete when using direct write instead of bpf_skb_store_bytes(), meaning the programs can use available helpers like bpf_csum_diff(), and implement csum_add(), csum_sub(), csum_block_add(), csum_block_sub() equivalents in eBPF together with the new helper. A usage example will be provided for iproute2's examples/bpf/ directory. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 22:26:13 +00:00
if (meta)
return meta->pkt_access;
env->seen_direct_write = true;
return true;
default:
return false;
}
}
static int __check_packet_access(struct bpf_verifier_env *env, u32 regno,
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the access size to be 0 when accessing the previous argument (arg). Right now, it requires the arg needs to be NULL when size passed is 0 or could be 0. It also requires a non-NULL arg when the size is proved to be non-0. This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior such that for size-0 or possible size-0, it is not required the arg equal to NULL. There are a couple of reasons for this semantics change, and all of them intends to simplify user bpf programs which may improve user experience and/or increase chances of verifier acceptance. Together with the next patch which changes bpf_probe_read arg2 type from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO, the following two examples, which fail the verifier currently, are able to get verifier acceptance. Example 1: unsigned long len = pend - pstart; len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len; len &= MAX_PAYLOAD_LEN; bpf_probe_read(data->payload, len, pstart); It does not have test for "len > 0" and it failed the verifier. Users may not be aware that they have to add this test. Converting the bpf_probe_read helper to have ARG_CONST_SIZE_OR_ZERO helps the above code get verifier acceptance. Example 2: Here is one example where llvm "messed up" the code and the verifier fails. ...... unsigned long len = pend - pstart; if (len > 0 && len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); ...... The compiler generates the following code and verifier fails: ...... 39: (79) r2 = *(u64 *)(r10 -16) 40: (1f) r2 -= r8 41: (bf) r1 = r2 42: (07) r1 += -1 43: (25) if r1 > 0xffe goto pc+3 R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff)) R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0) R8=inv(id=0) R9=inv0 R10=fp0 44: (bf) r1 = r6 45: (bf) r3 = r8 46: (85) call bpf_probe_read#45 R2 min value is negative, either use unsigned or 'var &= const' ...... The compiler optimization is correct. If r1 = 0, r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap. r1 > 0xffe at insn #43 can actually capture both "r1 > 0" and "len <= MAX_PAYLOAD_LEN". This however causes an issue in verifier as the value range of arg2 "r2" does not properly get refined and lead to verification failure. Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO allows the following simplied code: unsigned long len = pend - pstart; if (len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); The llvm compiler will generate less complex code and the verifier is able to verify that the program is okay. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12 22:49:09 +00:00
int off, int size, bool zero_size_allowed)
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
{
struct bpf_reg_state *regs = cur_regs(env);
struct bpf_reg_state *reg = &regs[regno];
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the access size to be 0 when accessing the previous argument (arg). Right now, it requires the arg needs to be NULL when size passed is 0 or could be 0. It also requires a non-NULL arg when the size is proved to be non-0. This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior such that for size-0 or possible size-0, it is not required the arg equal to NULL. There are a couple of reasons for this semantics change, and all of them intends to simplify user bpf programs which may improve user experience and/or increase chances of verifier acceptance. Together with the next patch which changes bpf_probe_read arg2 type from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO, the following two examples, which fail the verifier currently, are able to get verifier acceptance. Example 1: unsigned long len = pend - pstart; len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len; len &= MAX_PAYLOAD_LEN; bpf_probe_read(data->payload, len, pstart); It does not have test for "len > 0" and it failed the verifier. Users may not be aware that they have to add this test. Converting the bpf_probe_read helper to have ARG_CONST_SIZE_OR_ZERO helps the above code get verifier acceptance. Example 2: Here is one example where llvm "messed up" the code and the verifier fails. ...... unsigned long len = pend - pstart; if (len > 0 && len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); ...... The compiler generates the following code and verifier fails: ...... 39: (79) r2 = *(u64 *)(r10 -16) 40: (1f) r2 -= r8 41: (bf) r1 = r2 42: (07) r1 += -1 43: (25) if r1 > 0xffe goto pc+3 R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff)) R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0) R8=inv(id=0) R9=inv0 R10=fp0 44: (bf) r1 = r6 45: (bf) r3 = r8 46: (85) call bpf_probe_read#45 R2 min value is negative, either use unsigned or 'var &= const' ...... The compiler optimization is correct. If r1 = 0, r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap. r1 > 0xffe at insn #43 can actually capture both "r1 > 0" and "len <= MAX_PAYLOAD_LEN". This however causes an issue in verifier as the value range of arg2 "r2" does not properly get refined and lead to verification failure. Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO allows the following simplied code: unsigned long len = pend - pstart; if (len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); The llvm compiler will generate less complex code and the verifier is able to verify that the program is okay. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12 22:49:09 +00:00
if (off < 0 || size < 0 || (size == 0 && !zero_size_allowed) ||
(u64)off + size > reg->range) {
verbose(env, "invalid access to packet, off=%d size=%d, R%d(id=%d,off=%d,r=%d)\n",
off, size, regno, reg->id, reg->off, reg->range);
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
return -EACCES;
}
return 0;
}
static int check_packet_access(struct bpf_verifier_env *env, u32 regno, int off,
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the access size to be 0 when accessing the previous argument (arg). Right now, it requires the arg needs to be NULL when size passed is 0 or could be 0. It also requires a non-NULL arg when the size is proved to be non-0. This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior such that for size-0 or possible size-0, it is not required the arg equal to NULL. There are a couple of reasons for this semantics change, and all of them intends to simplify user bpf programs which may improve user experience and/or increase chances of verifier acceptance. Together with the next patch which changes bpf_probe_read arg2 type from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO, the following two examples, which fail the verifier currently, are able to get verifier acceptance. Example 1: unsigned long len = pend - pstart; len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len; len &= MAX_PAYLOAD_LEN; bpf_probe_read(data->payload, len, pstart); It does not have test for "len > 0" and it failed the verifier. Users may not be aware that they have to add this test. Converting the bpf_probe_read helper to have ARG_CONST_SIZE_OR_ZERO helps the above code get verifier acceptance. Example 2: Here is one example where llvm "messed up" the code and the verifier fails. ...... unsigned long len = pend - pstart; if (len > 0 && len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); ...... The compiler generates the following code and verifier fails: ...... 39: (79) r2 = *(u64 *)(r10 -16) 40: (1f) r2 -= r8 41: (bf) r1 = r2 42: (07) r1 += -1 43: (25) if r1 > 0xffe goto pc+3 R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff)) R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0) R8=inv(id=0) R9=inv0 R10=fp0 44: (bf) r1 = r6 45: (bf) r3 = r8 46: (85) call bpf_probe_read#45 R2 min value is negative, either use unsigned or 'var &= const' ...... The compiler optimization is correct. If r1 = 0, r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap. r1 > 0xffe at insn #43 can actually capture both "r1 > 0" and "len <= MAX_PAYLOAD_LEN". This however causes an issue in verifier as the value range of arg2 "r2" does not properly get refined and lead to verification failure. Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO allows the following simplied code: unsigned long len = pend - pstart; if (len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); The llvm compiler will generate less complex code and the verifier is able to verify that the program is okay. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12 22:49:09 +00:00
int size, bool zero_size_allowed)
{
struct bpf_reg_state *regs = cur_regs(env);
struct bpf_reg_state *reg = &regs[regno];
int err;
/* We may have added a variable offset to the packet pointer; but any
* reg->range we have comes after that. We are only checking the fixed
* offset.
*/
/* We don't allow negative numbers, because we aren't tracking enough
* detail to prove they're safe.
*/
if (reg->smin_value < 0) {
verbose(env, "R%d min value is negative, either use unsigned index or do a if (index >=0) check.\n",
regno);
return -EACCES;
}
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the access size to be 0 when accessing the previous argument (arg). Right now, it requires the arg needs to be NULL when size passed is 0 or could be 0. It also requires a non-NULL arg when the size is proved to be non-0. This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior such that for size-0 or possible size-0, it is not required the arg equal to NULL. There are a couple of reasons for this semantics change, and all of them intends to simplify user bpf programs which may improve user experience and/or increase chances of verifier acceptance. Together with the next patch which changes bpf_probe_read arg2 type from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO, the following two examples, which fail the verifier currently, are able to get verifier acceptance. Example 1: unsigned long len = pend - pstart; len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len; len &= MAX_PAYLOAD_LEN; bpf_probe_read(data->payload, len, pstart); It does not have test for "len > 0" and it failed the verifier. Users may not be aware that they have to add this test. Converting the bpf_probe_read helper to have ARG_CONST_SIZE_OR_ZERO helps the above code get verifier acceptance. Example 2: Here is one example where llvm "messed up" the code and the verifier fails. ...... unsigned long len = pend - pstart; if (len > 0 && len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); ...... The compiler generates the following code and verifier fails: ...... 39: (79) r2 = *(u64 *)(r10 -16) 40: (1f) r2 -= r8 41: (bf) r1 = r2 42: (07) r1 += -1 43: (25) if r1 > 0xffe goto pc+3 R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff)) R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0) R8=inv(id=0) R9=inv0 R10=fp0 44: (bf) r1 = r6 45: (bf) r3 = r8 46: (85) call bpf_probe_read#45 R2 min value is negative, either use unsigned or 'var &= const' ...... The compiler optimization is correct. If r1 = 0, r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap. r1 > 0xffe at insn #43 can actually capture both "r1 > 0" and "len <= MAX_PAYLOAD_LEN". This however causes an issue in verifier as the value range of arg2 "r2" does not properly get refined and lead to verification failure. Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO allows the following simplied code: unsigned long len = pend - pstart; if (len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); The llvm compiler will generate less complex code and the verifier is able to verify that the program is okay. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12 22:49:09 +00:00
err = __check_packet_access(env, regno, off, size, zero_size_allowed);
if (err) {
verbose(env, "R%d offset is outside of the packet\n", regno);
return err;
}
return err;
}
/* check access to 'struct bpf_context' fields. Supports fixed offsets only */
static int check_ctx_access(struct bpf_verifier_env *env, int insn_idx, int off, int size,
enum bpf_access_type t, enum bpf_reg_type *reg_type)
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
{
bpf: simplify narrower ctx access This work tries to make the semantics and code around the narrower ctx access a bit easier to follow. Right now everything is done inside the .is_valid_access(). Offset matching is done differently for read/write types, meaning writes don't support narrower access and thus matching only on offsetof(struct foo, bar) is enough whereas for read case that supports narrower access we must check for offsetof(struct foo, bar) + offsetof(struct foo, bar) + sizeof(<bar>) - 1 for each of the cases. For read cases of individual members that don't support narrower access (like packet pointers or skb->cb[] case which has its own narrow access logic), we check as usual only offsetof(struct foo, bar) like in write case. Then, for the case where narrower access is allowed, we also need to set the aux info for the access. Meaning, ctx_field_size and converted_op_size have to be set. First is the original field size e.g. sizeof(<bar>) as in above example from the user facing ctx, and latter one is the target size after actual rewrite happened, thus for the kernel facing ctx. Also here we need the range match and we need to keep track changing convert_ctx_access() and converted_op_size from is_valid_access() as both are not at the same location. We can simplify the code a bit: check_ctx_access() becomes simpler in that we only store ctx_field_size as a meta data and later in convert_ctx_accesses() we fetch the target_size right from the location where we do convert. Should the verifier be misconfigured we do reject for BPF_WRITE cases or target_size that are not provided. For the subsystems, we always work on ranges in is_valid_access() and add small helpers for ranges and narrow access, convert_ctx_accesses() sets target_size for the relevant instruction. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-02 00:13:27 +00:00
struct bpf_insn_access_aux info = {
.reg_type = *reg_type,
};
if (env->ops->is_valid_access &&
env->ops->is_valid_access(off, size, t, &info)) {
bpf: simplify narrower ctx access This work tries to make the semantics and code around the narrower ctx access a bit easier to follow. Right now everything is done inside the .is_valid_access(). Offset matching is done differently for read/write types, meaning writes don't support narrower access and thus matching only on offsetof(struct foo, bar) is enough whereas for read case that supports narrower access we must check for offsetof(struct foo, bar) + offsetof(struct foo, bar) + sizeof(<bar>) - 1 for each of the cases. For read cases of individual members that don't support narrower access (like packet pointers or skb->cb[] case which has its own narrow access logic), we check as usual only offsetof(struct foo, bar) like in write case. Then, for the case where narrower access is allowed, we also need to set the aux info for the access. Meaning, ctx_field_size and converted_op_size have to be set. First is the original field size e.g. sizeof(<bar>) as in above example from the user facing ctx, and latter one is the target size after actual rewrite happened, thus for the kernel facing ctx. Also here we need the range match and we need to keep track changing convert_ctx_access() and converted_op_size from is_valid_access() as both are not at the same location. We can simplify the code a bit: check_ctx_access() becomes simpler in that we only store ctx_field_size as a meta data and later in convert_ctx_accesses() we fetch the target_size right from the location where we do convert. Should the verifier be misconfigured we do reject for BPF_WRITE cases or target_size that are not provided. For the subsystems, we always work on ranges in is_valid_access() and add small helpers for ranges and narrow access, convert_ctx_accesses() sets target_size for the relevant instruction. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-02 00:13:27 +00:00
/* A non zero info.ctx_field_size indicates that this field is a
* candidate for later verifier transformation to load the whole
* field and then apply a mask when accessed with a narrower
* access than actual ctx access size. A zero info.ctx_field_size
* will only allow for whole field access and rejects any other
* type of narrower access.
*/
*reg_type = info.reg_type;
env->insn_aux_data[insn_idx].ctx_field_size = info.ctx_field_size;
/* remember the offset of last byte accessed in ctx */
if (env->prog->aux->max_ctx_offset < off + size)
env->prog->aux->max_ctx_offset = off + size;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return 0;
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
verbose(env, "invalid bpf_context access off=%d size=%d\n", off, size);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EACCES;
}
bpf: fix mixed signed/unsigned derived min/max value bounds Edward reported that there's an issue in min/max value bounds tracking when signed and unsigned compares both provide hints on limits when having unknown variables. E.g. a program such as the following should have been rejected: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff8a94cda93400 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 11: (65) if r1 s> 0x1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=0,max_value=1 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 14: (b7) r0 = 0 15: (95) exit What happens is that in the first part ... 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 ... r1 carries an unsigned value, and is compared as unsigned against a register carrying an immediate. Verifier deduces in reg_set_min_max() that since the compare is unsigned and operation is greater than (>), that in the fall-through/false case, r1's minimum bound must be 0 and maximum bound must be r2. Latter is larger than the bound and thus max value is reset back to being 'invalid' aka BPF_REGISTER_MAX_RANGE. Thus, r1 state is now 'R1=inv,min_value=0'. The subsequent test ... 11: (65) if r1 s> 0x1 goto pc+2 ... is a signed compare of r1 with immediate value 1. Here, verifier deduces in reg_set_min_max() that since the compare is signed this time and operation is greater than (>), that in the fall-through/false case, we can deduce that r1's maximum bound must be 1, meaning with prior test, we result in r1 having the following state: R1=inv,min_value=0,max_value=1. Given that the actual value this holds is -8, the bounds are wrongly deduced. When this is being added to r0 which holds the map_value(_adj) type, then subsequent store access in above case will go through check_mem_access() which invokes check_map_access_adj(), that will then probe whether the map memory is in bounds based on the min_value and max_value as well as access size since the actual unknown value is min_value <= x <= max_value; commit fce366a9dd0d ("bpf, verifier: fix alu ops against map_value{, _adj} register types") provides some more explanation on the semantics. It's worth to note in this context that in the current code, min_value and max_value tracking are used for two things, i) dynamic map value access via check_map_access_adj() and since commit 06c1c049721a ("bpf: allow helpers access to variable memory") ii) also enforced at check_helper_mem_access() when passing a memory address (pointer to packet, map value, stack) and length pair to a helper and the length in this case is an unknown value defining an access range through min_value/max_value in that case. The min_value/max_value tracking is /not/ used in the direct packet access case to track ranges. However, the issue also affects case ii), for example, the following crafted program based on the same principle must be rejected as well: 0: (b7) r2 = 0 1: (bf) r3 = r10 2: (07) r3 += -512 3: (7a) *(u64 *)(r10 -16) = -8 4: (79) r4 = *(u64 *)(r10 -16) 5: (b7) r6 = -1 6: (2d) if r4 > r6 goto pc+5 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 7: (65) if r4 s> 0x1 goto pc+4 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0,max_value=1 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 8: (07) r4 += 1 9: (b7) r5 = 0 10: (6a) *(u16 *)(r10 -512) = 0 11: (85) call bpf_skb_load_bytes#26 12: (b7) r0 = 0 13: (95) exit Meaning, while we initialize the max_value stack slot that the verifier thinks we access in the [1,2] range, in reality we pass -7 as length which is interpreted as u32 in the helper. Thus, this issue is relevant also for the case of helper ranges. Resetting both bounds in check_reg_overflow() in case only one of them exceeds limits is also not enough as similar test can be created that uses values which are within range, thus also here learned min value in r1 is incorrect when mixed with later signed test to create a range: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff880ad081fa00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (65) if r1 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=3,max_value=4 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 14: (b7) r0 = 0 15: (95) exit This leaves us with two options for fixing this: i) to invalidate all prior learned information once we switch signed context, ii) to track min/max signed and unsigned boundaries separately as done in [0]. (Given latter introduces major changes throughout the whole verifier, it's rather net-next material, thus this patch follows option i), meaning we can derive bounds either from only signed tests or only unsigned tests.) There is still the case of adjust_reg_min_max_vals(), where we adjust bounds on ALU operations, meaning programs like the following where boundaries on the reg get mixed in context later on when bounds are merged on the dst reg must get rejected, too: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff89b2bf87ce00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+6 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (b7) r7 = 1 12: (65) if r7 s> 0x0 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,max_value=0 R10=fp 13: (b7) r0 = 0 14: (95) exit from 12 to 15: R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,min_value=1 R10=fp 15: (0f) r7 += r1 16: (65) if r7 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 17: (0f) r0 += r7 18: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=4,max_value=4 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 19: (b7) r0 = 0 20: (95) exit Meaning, in adjust_reg_min_max_vals() we must also reset range values on the dst when src/dst registers have mixed signed/ unsigned derived min/max value bounds with one unbounded value as otherwise they can be added together deducing false boundaries. Once both boundaries are established from either ALU ops or compare operations w/o mixing signed/unsigned insns, then they can safely be added to other regs also having both boundaries established. Adding regs with one unbounded side to a map value where the bounded side has been learned w/o mixing ops is possible, but the resulting map value won't recover from that, meaning such op is considered invalid on the time of actual access. Invalid bounds are set on the dst reg in case i) src reg, or ii) in case dst reg already had them. The only way to recover would be to perform i) ALU ops but only 'add' is allowed on map value types or ii) comparisons, but these are disallowed on pointers in case they span a range. This is fine as only BPF_JEQ and BPF_JNE may be performed on PTR_TO_MAP_VALUE_OR_NULL registers which potentially turn them into PTR_TO_MAP_VALUE type depending on the branch, so only here min/max value cannot be invalidated for them. In terms of state pruning, value_from_signed is considered as well in states_equal() when dealing with adjusted map values. With regards to breaking existing programs, there is a small risk, but use-cases are rather quite narrow where this could occur and mixing compares probably unlikely. Joint work with Josef and Edward. [0] https://lists.iovisor.org/pipermail/iovisor-dev/2017-June/000822.html Fixes: 484611357c19 ("bpf: allow access into map value arrays") Reported-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20 22:00:21 +00:00
static bool __is_pointer_value(bool allow_ptr_leaks,
const struct bpf_reg_state *reg)
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
{
bpf: fix mixed signed/unsigned derived min/max value bounds Edward reported that there's an issue in min/max value bounds tracking when signed and unsigned compares both provide hints on limits when having unknown variables. E.g. a program such as the following should have been rejected: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff8a94cda93400 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 11: (65) if r1 s> 0x1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=0,max_value=1 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 14: (b7) r0 = 0 15: (95) exit What happens is that in the first part ... 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 ... r1 carries an unsigned value, and is compared as unsigned against a register carrying an immediate. Verifier deduces in reg_set_min_max() that since the compare is unsigned and operation is greater than (>), that in the fall-through/false case, r1's minimum bound must be 0 and maximum bound must be r2. Latter is larger than the bound and thus max value is reset back to being 'invalid' aka BPF_REGISTER_MAX_RANGE. Thus, r1 state is now 'R1=inv,min_value=0'. The subsequent test ... 11: (65) if r1 s> 0x1 goto pc+2 ... is a signed compare of r1 with immediate value 1. Here, verifier deduces in reg_set_min_max() that since the compare is signed this time and operation is greater than (>), that in the fall-through/false case, we can deduce that r1's maximum bound must be 1, meaning with prior test, we result in r1 having the following state: R1=inv,min_value=0,max_value=1. Given that the actual value this holds is -8, the bounds are wrongly deduced. When this is being added to r0 which holds the map_value(_adj) type, then subsequent store access in above case will go through check_mem_access() which invokes check_map_access_adj(), that will then probe whether the map memory is in bounds based on the min_value and max_value as well as access size since the actual unknown value is min_value <= x <= max_value; commit fce366a9dd0d ("bpf, verifier: fix alu ops against map_value{, _adj} register types") provides some more explanation on the semantics. It's worth to note in this context that in the current code, min_value and max_value tracking are used for two things, i) dynamic map value access via check_map_access_adj() and since commit 06c1c049721a ("bpf: allow helpers access to variable memory") ii) also enforced at check_helper_mem_access() when passing a memory address (pointer to packet, map value, stack) and length pair to a helper and the length in this case is an unknown value defining an access range through min_value/max_value in that case. The min_value/max_value tracking is /not/ used in the direct packet access case to track ranges. However, the issue also affects case ii), for example, the following crafted program based on the same principle must be rejected as well: 0: (b7) r2 = 0 1: (bf) r3 = r10 2: (07) r3 += -512 3: (7a) *(u64 *)(r10 -16) = -8 4: (79) r4 = *(u64 *)(r10 -16) 5: (b7) r6 = -1 6: (2d) if r4 > r6 goto pc+5 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 7: (65) if r4 s> 0x1 goto pc+4 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0,max_value=1 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 8: (07) r4 += 1 9: (b7) r5 = 0 10: (6a) *(u16 *)(r10 -512) = 0 11: (85) call bpf_skb_load_bytes#26 12: (b7) r0 = 0 13: (95) exit Meaning, while we initialize the max_value stack slot that the verifier thinks we access in the [1,2] range, in reality we pass -7 as length which is interpreted as u32 in the helper. Thus, this issue is relevant also for the case of helper ranges. Resetting both bounds in check_reg_overflow() in case only one of them exceeds limits is also not enough as similar test can be created that uses values which are within range, thus also here learned min value in r1 is incorrect when mixed with later signed test to create a range: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff880ad081fa00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (65) if r1 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=3,max_value=4 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 14: (b7) r0 = 0 15: (95) exit This leaves us with two options for fixing this: i) to invalidate all prior learned information once we switch signed context, ii) to track min/max signed and unsigned boundaries separately as done in [0]. (Given latter introduces major changes throughout the whole verifier, it's rather net-next material, thus this patch follows option i), meaning we can derive bounds either from only signed tests or only unsigned tests.) There is still the case of adjust_reg_min_max_vals(), where we adjust bounds on ALU operations, meaning programs like the following where boundaries on the reg get mixed in context later on when bounds are merged on the dst reg must get rejected, too: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff89b2bf87ce00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+6 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (b7) r7 = 1 12: (65) if r7 s> 0x0 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,max_value=0 R10=fp 13: (b7) r0 = 0 14: (95) exit from 12 to 15: R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,min_value=1 R10=fp 15: (0f) r7 += r1 16: (65) if r7 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 17: (0f) r0 += r7 18: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=4,max_value=4 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 19: (b7) r0 = 0 20: (95) exit Meaning, in adjust_reg_min_max_vals() we must also reset range values on the dst when src/dst registers have mixed signed/ unsigned derived min/max value bounds with one unbounded value as otherwise they can be added together deducing false boundaries. Once both boundaries are established from either ALU ops or compare operations w/o mixing signed/unsigned insns, then they can safely be added to other regs also having both boundaries established. Adding regs with one unbounded side to a map value where the bounded side has been learned w/o mixing ops is possible, but the resulting map value won't recover from that, meaning such op is considered invalid on the time of actual access. Invalid bounds are set on the dst reg in case i) src reg, or ii) in case dst reg already had them. The only way to recover would be to perform i) ALU ops but only 'add' is allowed on map value types or ii) comparisons, but these are disallowed on pointers in case they span a range. This is fine as only BPF_JEQ and BPF_JNE may be performed on PTR_TO_MAP_VALUE_OR_NULL registers which potentially turn them into PTR_TO_MAP_VALUE type depending on the branch, so only here min/max value cannot be invalidated for them. In terms of state pruning, value_from_signed is considered as well in states_equal() when dealing with adjusted map values. With regards to breaking existing programs, there is a small risk, but use-cases are rather quite narrow where this could occur and mixing compares probably unlikely. Joint work with Josef and Edward. [0] https://lists.iovisor.org/pipermail/iovisor-dev/2017-June/000822.html Fixes: 484611357c19 ("bpf: allow access into map value arrays") Reported-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20 22:00:21 +00:00
if (allow_ptr_leaks)
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
return false;
return reg->type != SCALAR_VALUE;
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
}
bpf: fix mixed signed/unsigned derived min/max value bounds Edward reported that there's an issue in min/max value bounds tracking when signed and unsigned compares both provide hints on limits when having unknown variables. E.g. a program such as the following should have been rejected: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff8a94cda93400 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 11: (65) if r1 s> 0x1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=0,max_value=1 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 14: (b7) r0 = 0 15: (95) exit What happens is that in the first part ... 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 ... r1 carries an unsigned value, and is compared as unsigned against a register carrying an immediate. Verifier deduces in reg_set_min_max() that since the compare is unsigned and operation is greater than (>), that in the fall-through/false case, r1's minimum bound must be 0 and maximum bound must be r2. Latter is larger than the bound and thus max value is reset back to being 'invalid' aka BPF_REGISTER_MAX_RANGE. Thus, r1 state is now 'R1=inv,min_value=0'. The subsequent test ... 11: (65) if r1 s> 0x1 goto pc+2 ... is a signed compare of r1 with immediate value 1. Here, verifier deduces in reg_set_min_max() that since the compare is signed this time and operation is greater than (>), that in the fall-through/false case, we can deduce that r1's maximum bound must be 1, meaning with prior test, we result in r1 having the following state: R1=inv,min_value=0,max_value=1. Given that the actual value this holds is -8, the bounds are wrongly deduced. When this is being added to r0 which holds the map_value(_adj) type, then subsequent store access in above case will go through check_mem_access() which invokes check_map_access_adj(), that will then probe whether the map memory is in bounds based on the min_value and max_value as well as access size since the actual unknown value is min_value <= x <= max_value; commit fce366a9dd0d ("bpf, verifier: fix alu ops against map_value{, _adj} register types") provides some more explanation on the semantics. It's worth to note in this context that in the current code, min_value and max_value tracking are used for two things, i) dynamic map value access via check_map_access_adj() and since commit 06c1c049721a ("bpf: allow helpers access to variable memory") ii) also enforced at check_helper_mem_access() when passing a memory address (pointer to packet, map value, stack) and length pair to a helper and the length in this case is an unknown value defining an access range through min_value/max_value in that case. The min_value/max_value tracking is /not/ used in the direct packet access case to track ranges. However, the issue also affects case ii), for example, the following crafted program based on the same principle must be rejected as well: 0: (b7) r2 = 0 1: (bf) r3 = r10 2: (07) r3 += -512 3: (7a) *(u64 *)(r10 -16) = -8 4: (79) r4 = *(u64 *)(r10 -16) 5: (b7) r6 = -1 6: (2d) if r4 > r6 goto pc+5 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 7: (65) if r4 s> 0x1 goto pc+4 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0,max_value=1 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 8: (07) r4 += 1 9: (b7) r5 = 0 10: (6a) *(u16 *)(r10 -512) = 0 11: (85) call bpf_skb_load_bytes#26 12: (b7) r0 = 0 13: (95) exit Meaning, while we initialize the max_value stack slot that the verifier thinks we access in the [1,2] range, in reality we pass -7 as length which is interpreted as u32 in the helper. Thus, this issue is relevant also for the case of helper ranges. Resetting both bounds in check_reg_overflow() in case only one of them exceeds limits is also not enough as similar test can be created that uses values which are within range, thus also here learned min value in r1 is incorrect when mixed with later signed test to create a range: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff880ad081fa00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (65) if r1 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=3,max_value=4 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 14: (b7) r0 = 0 15: (95) exit This leaves us with two options for fixing this: i) to invalidate all prior learned information once we switch signed context, ii) to track min/max signed and unsigned boundaries separately as done in [0]. (Given latter introduces major changes throughout the whole verifier, it's rather net-next material, thus this patch follows option i), meaning we can derive bounds either from only signed tests or only unsigned tests.) There is still the case of adjust_reg_min_max_vals(), where we adjust bounds on ALU operations, meaning programs like the following where boundaries on the reg get mixed in context later on when bounds are merged on the dst reg must get rejected, too: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff89b2bf87ce00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+6 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (b7) r7 = 1 12: (65) if r7 s> 0x0 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,max_value=0 R10=fp 13: (b7) r0 = 0 14: (95) exit from 12 to 15: R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,min_value=1 R10=fp 15: (0f) r7 += r1 16: (65) if r7 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 17: (0f) r0 += r7 18: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=4,max_value=4 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 19: (b7) r0 = 0 20: (95) exit Meaning, in adjust_reg_min_max_vals() we must also reset range values on the dst when src/dst registers have mixed signed/ unsigned derived min/max value bounds with one unbounded value as otherwise they can be added together deducing false boundaries. Once both boundaries are established from either ALU ops or compare operations w/o mixing signed/unsigned insns, then they can safely be added to other regs also having both boundaries established. Adding regs with one unbounded side to a map value where the bounded side has been learned w/o mixing ops is possible, but the resulting map value won't recover from that, meaning such op is considered invalid on the time of actual access. Invalid bounds are set on the dst reg in case i) src reg, or ii) in case dst reg already had them. The only way to recover would be to perform i) ALU ops but only 'add' is allowed on map value types or ii) comparisons, but these are disallowed on pointers in case they span a range. This is fine as only BPF_JEQ and BPF_JNE may be performed on PTR_TO_MAP_VALUE_OR_NULL registers which potentially turn them into PTR_TO_MAP_VALUE type depending on the branch, so only here min/max value cannot be invalidated for them. In terms of state pruning, value_from_signed is considered as well in states_equal() when dealing with adjusted map values. With regards to breaking existing programs, there is a small risk, but use-cases are rather quite narrow where this could occur and mixing compares probably unlikely. Joint work with Josef and Edward. [0] https://lists.iovisor.org/pipermail/iovisor-dev/2017-June/000822.html Fixes: 484611357c19 ("bpf: allow access into map value arrays") Reported-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20 22:00:21 +00:00
static bool is_pointer_value(struct bpf_verifier_env *env, int regno)
{
return __is_pointer_value(env->allow_ptr_leaks, cur_regs(env) + regno);
bpf: fix mixed signed/unsigned derived min/max value bounds Edward reported that there's an issue in min/max value bounds tracking when signed and unsigned compares both provide hints on limits when having unknown variables. E.g. a program such as the following should have been rejected: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff8a94cda93400 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 11: (65) if r1 s> 0x1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=0,max_value=1 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 14: (b7) r0 = 0 15: (95) exit What happens is that in the first part ... 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 ... r1 carries an unsigned value, and is compared as unsigned against a register carrying an immediate. Verifier deduces in reg_set_min_max() that since the compare is unsigned and operation is greater than (>), that in the fall-through/false case, r1's minimum bound must be 0 and maximum bound must be r2. Latter is larger than the bound and thus max value is reset back to being 'invalid' aka BPF_REGISTER_MAX_RANGE. Thus, r1 state is now 'R1=inv,min_value=0'. The subsequent test ... 11: (65) if r1 s> 0x1 goto pc+2 ... is a signed compare of r1 with immediate value 1. Here, verifier deduces in reg_set_min_max() that since the compare is signed this time and operation is greater than (>), that in the fall-through/false case, we can deduce that r1's maximum bound must be 1, meaning with prior test, we result in r1 having the following state: R1=inv,min_value=0,max_value=1. Given that the actual value this holds is -8, the bounds are wrongly deduced. When this is being added to r0 which holds the map_value(_adj) type, then subsequent store access in above case will go through check_mem_access() which invokes check_map_access_adj(), that will then probe whether the map memory is in bounds based on the min_value and max_value as well as access size since the actual unknown value is min_value <= x <= max_value; commit fce366a9dd0d ("bpf, verifier: fix alu ops against map_value{, _adj} register types") provides some more explanation on the semantics. It's worth to note in this context that in the current code, min_value and max_value tracking are used for two things, i) dynamic map value access via check_map_access_adj() and since commit 06c1c049721a ("bpf: allow helpers access to variable memory") ii) also enforced at check_helper_mem_access() when passing a memory address (pointer to packet, map value, stack) and length pair to a helper and the length in this case is an unknown value defining an access range through min_value/max_value in that case. The min_value/max_value tracking is /not/ used in the direct packet access case to track ranges. However, the issue also affects case ii), for example, the following crafted program based on the same principle must be rejected as well: 0: (b7) r2 = 0 1: (bf) r3 = r10 2: (07) r3 += -512 3: (7a) *(u64 *)(r10 -16) = -8 4: (79) r4 = *(u64 *)(r10 -16) 5: (b7) r6 = -1 6: (2d) if r4 > r6 goto pc+5 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 7: (65) if r4 s> 0x1 goto pc+4 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0,max_value=1 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 8: (07) r4 += 1 9: (b7) r5 = 0 10: (6a) *(u16 *)(r10 -512) = 0 11: (85) call bpf_skb_load_bytes#26 12: (b7) r0 = 0 13: (95) exit Meaning, while we initialize the max_value stack slot that the verifier thinks we access in the [1,2] range, in reality we pass -7 as length which is interpreted as u32 in the helper. Thus, this issue is relevant also for the case of helper ranges. Resetting both bounds in check_reg_overflow() in case only one of them exceeds limits is also not enough as similar test can be created that uses values which are within range, thus also here learned min value in r1 is incorrect when mixed with later signed test to create a range: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff880ad081fa00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (65) if r1 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=3,max_value=4 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 14: (b7) r0 = 0 15: (95) exit This leaves us with two options for fixing this: i) to invalidate all prior learned information once we switch signed context, ii) to track min/max signed and unsigned boundaries separately as done in [0]. (Given latter introduces major changes throughout the whole verifier, it's rather net-next material, thus this patch follows option i), meaning we can derive bounds either from only signed tests or only unsigned tests.) There is still the case of adjust_reg_min_max_vals(), where we adjust bounds on ALU operations, meaning programs like the following where boundaries on the reg get mixed in context later on when bounds are merged on the dst reg must get rejected, too: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff89b2bf87ce00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+6 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (b7) r7 = 1 12: (65) if r7 s> 0x0 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,max_value=0 R10=fp 13: (b7) r0 = 0 14: (95) exit from 12 to 15: R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,min_value=1 R10=fp 15: (0f) r7 += r1 16: (65) if r7 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 17: (0f) r0 += r7 18: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=4,max_value=4 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 19: (b7) r0 = 0 20: (95) exit Meaning, in adjust_reg_min_max_vals() we must also reset range values on the dst when src/dst registers have mixed signed/ unsigned derived min/max value bounds with one unbounded value as otherwise they can be added together deducing false boundaries. Once both boundaries are established from either ALU ops or compare operations w/o mixing signed/unsigned insns, then they can safely be added to other regs also having both boundaries established. Adding regs with one unbounded side to a map value where the bounded side has been learned w/o mixing ops is possible, but the resulting map value won't recover from that, meaning such op is considered invalid on the time of actual access. Invalid bounds are set on the dst reg in case i) src reg, or ii) in case dst reg already had them. The only way to recover would be to perform i) ALU ops but only 'add' is allowed on map value types or ii) comparisons, but these are disallowed on pointers in case they span a range. This is fine as only BPF_JEQ and BPF_JNE may be performed on PTR_TO_MAP_VALUE_OR_NULL registers which potentially turn them into PTR_TO_MAP_VALUE type depending on the branch, so only here min/max value cannot be invalidated for them. In terms of state pruning, value_from_signed is considered as well in states_equal() when dealing with adjusted map values. With regards to breaking existing programs, there is a small risk, but use-cases are rather quite narrow where this could occur and mixing compares probably unlikely. Joint work with Josef and Edward. [0] https://lists.iovisor.org/pipermail/iovisor-dev/2017-June/000822.html Fixes: 484611357c19 ("bpf: allow access into map value arrays") Reported-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20 22:00:21 +00:00
}
static int check_pkt_ptr_alignment(struct bpf_verifier_env *env,
const struct bpf_reg_state *reg,
bpf: Track alignment of register values in the verifier. Currently if we add only constant values to pointers we can fully validate the alignment, and properly check if we need to reject the program on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures. However, once an unknown value is introduced we only allow byte sized memory accesses which is too restrictive. Add logic to track the known minimum alignment of register values, and propagate this state into registers containing pointers. The most common paradigm that makes use of this new logic is computing the transport header using the IP header length field. For example: struct ethhdr *ep = skb->data; struct iphdr *iph = (struct iphdr *) (ep + 1); struct tcphdr *th; ... n = iph->ihl; th = ((void *)iph + (n * 4)); port = th->dest; The existing code will reject the load of th->dest because it cannot validate that the alignment is at least 2 once "n * 4" is added the the packet pointer. In the new code, the register holding "n * 4" will have a reg->min_align value of 4, because any value multiplied by 4 will be at least 4 byte aligned. (actually, the eBPF code emitted by the compiler in this case is most likely to use a shift left by 2, but the end result is identical) At the critical addition: th = ((void *)iph + (n * 4)); The register holding 'th' will start with reg->off value of 14. The pointer addition will transform that reg into something that looks like: reg->aux_off = 14 reg->aux_off_align = 4 Next, the verifier will look at the th->dest load, and it will see a load offset of 2, and first check: if (reg->aux_off_align % size) which will pass because aux_off_align is 4. reg_off will be computed: reg_off = reg->off; ... reg_off += reg->aux_off; plus we have off==2, and it will thus check: if ((NET_IP_ALIGN + reg_off + off) % size != 0) which evaluates to: if ((NET_IP_ALIGN + 14 + 2) % size != 0) On strict alignment architectures, NET_IP_ALIGN is 2, thus: if ((2 + 14 + 2) % size != 0) which passes. These pointer transformations and checks work regardless of whether the constant offset or the variable with known alignment is added first to the pointer register. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2017-05-10 18:22:52 +00:00
int off, int size, bool strict)
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
{
struct tnum reg_off;
int ip_align;
bpf: Track alignment of register values in the verifier. Currently if we add only constant values to pointers we can fully validate the alignment, and properly check if we need to reject the program on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures. However, once an unknown value is introduced we only allow byte sized memory accesses which is too restrictive. Add logic to track the known minimum alignment of register values, and propagate this state into registers containing pointers. The most common paradigm that makes use of this new logic is computing the transport header using the IP header length field. For example: struct ethhdr *ep = skb->data; struct iphdr *iph = (struct iphdr *) (ep + 1); struct tcphdr *th; ... n = iph->ihl; th = ((void *)iph + (n * 4)); port = th->dest; The existing code will reject the load of th->dest because it cannot validate that the alignment is at least 2 once "n * 4" is added the the packet pointer. In the new code, the register holding "n * 4" will have a reg->min_align value of 4, because any value multiplied by 4 will be at least 4 byte aligned. (actually, the eBPF code emitted by the compiler in this case is most likely to use a shift left by 2, but the end result is identical) At the critical addition: th = ((void *)iph + (n * 4)); The register holding 'th' will start with reg->off value of 14. The pointer addition will transform that reg into something that looks like: reg->aux_off = 14 reg->aux_off_align = 4 Next, the verifier will look at the th->dest load, and it will see a load offset of 2, and first check: if (reg->aux_off_align % size) which will pass because aux_off_align is 4. reg_off will be computed: reg_off = reg->off; ... reg_off += reg->aux_off; plus we have off==2, and it will thus check: if ((NET_IP_ALIGN + reg_off + off) % size != 0) which evaluates to: if ((NET_IP_ALIGN + 14 + 2) % size != 0) On strict alignment architectures, NET_IP_ALIGN is 2, thus: if ((2 + 14 + 2) % size != 0) which passes. These pointer transformations and checks work regardless of whether the constant offset or the variable with known alignment is added first to the pointer register. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2017-05-10 18:22:52 +00:00
/* Byte size accesses are always allowed. */
if (!strict || size == 1)
return 0;
/* For platforms that do not have a Kconfig enabling
* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS the value of
* NET_IP_ALIGN is universally set to '2'. And on platforms
* that do set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS, we get
* to this code only in strict mode where we want to emulate
* the NET_IP_ALIGN==2 checking. Therefore use an
* unconditional IP align value of '2'.
*/
ip_align = 2;
reg_off = tnum_add(reg->var_off, tnum_const(ip_align + reg->off + off));
if (!tnum_is_aligned(reg_off, size)) {
char tn_buf[48];
tnum_strn(tn_buf, sizeof(tn_buf), reg->var_off);
verbose(env,
"misaligned packet access off %d+%s+%d+%d size %d\n",
ip_align, tn_buf, reg->off, off, size);
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
return -EACCES;
}
bpf, verifier: fix rejection of unaligned access checks for map_value_adj Currently, the verifier doesn't reject unaligned access for map_value_adj register types. Commit 484611357c19 ("bpf: allow access into map value arrays") added logic to check_ptr_alignment() extending it from PTR_TO_PACKET to also PTR_TO_MAP_VALUE_ADJ, but for PTR_TO_MAP_VALUE_ADJ no enforcement is in place, because reg->id for PTR_TO_MAP_VALUE_ADJ reg types is never non-zero, meaning, we can cause BPF_H/_W/_DW-based unaligned access for architectures not supporting efficient unaligned access, and thus worst case could raise exceptions on some archs that are unable to correct the unaligned access or perform a different memory access to the actual requested one and such. i) Unaligned load with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x42533a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+11 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (61) r1 = *(u32 *)(r0 +0) 8: (35) if r1 >= 0xb goto pc+9 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=10 R10=fp 9: (07) r0 += 3 10: (79) r7 = *(u64 *)(r0 +0) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R10=fp 11: (79) r7 = *(u64 *)(r0 +2) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R7=inv R10=fp [...] ii) Unaligned store with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x4df16a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+19 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (07) r0 += 3 8: (7a) *(u64 *)(r0 +0) = 42 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 9: (7a) *(u64 *)(r0 +2) = 43 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 10: (7a) *(u64 *)(r0 -2) = 44 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp [...] For the PTR_TO_PACKET type, reg->id is initially zero when skb->data was fetched, it later receives a reg->id from env->id_gen generator once another register with UNKNOWN_VALUE type was added to it via check_packet_ptr_add(). The purpose of this reg->id is twofold: i) it is used in find_good_pkt_pointers() for setting the allowed access range for regs with PTR_TO_PACKET of same id once verifier matched on data/data_end tests, and ii) for check_ptr_alignment() to determine that when not having efficient unaligned access and register with UNKNOWN_VALUE was added to PTR_TO_PACKET, that we're only allowed to access the content bytewise due to unknown unalignment. reg->id was never intended for PTR_TO_MAP_VALUE{,_ADJ} types and thus is always zero, the only marking is in PTR_TO_MAP_VALUE_OR_NULL that was added after 484611357c19 via 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers"). Above tests will fail for non-root environment due to prohibited pointer arithmetic. The fix splits register-type specific checks into their own helper instead of keeping them combined, so we don't run into a similar issue in future once we extend check_ptr_alignment() further and forget to add reg->type checks for some of the checks. Fixes: 484611357c19 ("bpf: allow access into map value arrays") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Josef Bacik <jbacik@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 00:24:03 +00:00
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
return 0;
}
static int check_generic_ptr_alignment(struct bpf_verifier_env *env,
const struct bpf_reg_state *reg,
const char *pointer_desc,
int off, int size, bool strict)
bpf, verifier: fix rejection of unaligned access checks for map_value_adj Currently, the verifier doesn't reject unaligned access for map_value_adj register types. Commit 484611357c19 ("bpf: allow access into map value arrays") added logic to check_ptr_alignment() extending it from PTR_TO_PACKET to also PTR_TO_MAP_VALUE_ADJ, but for PTR_TO_MAP_VALUE_ADJ no enforcement is in place, because reg->id for PTR_TO_MAP_VALUE_ADJ reg types is never non-zero, meaning, we can cause BPF_H/_W/_DW-based unaligned access for architectures not supporting efficient unaligned access, and thus worst case could raise exceptions on some archs that are unable to correct the unaligned access or perform a different memory access to the actual requested one and such. i) Unaligned load with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x42533a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+11 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (61) r1 = *(u32 *)(r0 +0) 8: (35) if r1 >= 0xb goto pc+9 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=10 R10=fp 9: (07) r0 += 3 10: (79) r7 = *(u64 *)(r0 +0) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R10=fp 11: (79) r7 = *(u64 *)(r0 +2) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R7=inv R10=fp [...] ii) Unaligned store with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x4df16a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+19 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (07) r0 += 3 8: (7a) *(u64 *)(r0 +0) = 42 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 9: (7a) *(u64 *)(r0 +2) = 43 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 10: (7a) *(u64 *)(r0 -2) = 44 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp [...] For the PTR_TO_PACKET type, reg->id is initially zero when skb->data was fetched, it later receives a reg->id from env->id_gen generator once another register with UNKNOWN_VALUE type was added to it via check_packet_ptr_add(). The purpose of this reg->id is twofold: i) it is used in find_good_pkt_pointers() for setting the allowed access range for regs with PTR_TO_PACKET of same id once verifier matched on data/data_end tests, and ii) for check_ptr_alignment() to determine that when not having efficient unaligned access and register with UNKNOWN_VALUE was added to PTR_TO_PACKET, that we're only allowed to access the content bytewise due to unknown unalignment. reg->id was never intended for PTR_TO_MAP_VALUE{,_ADJ} types and thus is always zero, the only marking is in PTR_TO_MAP_VALUE_OR_NULL that was added after 484611357c19 via 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers"). Above tests will fail for non-root environment due to prohibited pointer arithmetic. The fix splits register-type specific checks into their own helper instead of keeping them combined, so we don't run into a similar issue in future once we extend check_ptr_alignment() further and forget to add reg->type checks for some of the checks. Fixes: 484611357c19 ("bpf: allow access into map value arrays") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Josef Bacik <jbacik@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 00:24:03 +00:00
{
struct tnum reg_off;
/* Byte size accesses are always allowed. */
if (!strict || size == 1)
return 0;
reg_off = tnum_add(reg->var_off, tnum_const(reg->off + off));
if (!tnum_is_aligned(reg_off, size)) {
char tn_buf[48];
tnum_strn(tn_buf, sizeof(tn_buf), reg->var_off);
verbose(env, "misaligned %saccess off %s+%d+%d size %d\n",
pointer_desc, tn_buf, reg->off, off, size);
bpf, verifier: fix rejection of unaligned access checks for map_value_adj Currently, the verifier doesn't reject unaligned access for map_value_adj register types. Commit 484611357c19 ("bpf: allow access into map value arrays") added logic to check_ptr_alignment() extending it from PTR_TO_PACKET to also PTR_TO_MAP_VALUE_ADJ, but for PTR_TO_MAP_VALUE_ADJ no enforcement is in place, because reg->id for PTR_TO_MAP_VALUE_ADJ reg types is never non-zero, meaning, we can cause BPF_H/_W/_DW-based unaligned access for architectures not supporting efficient unaligned access, and thus worst case could raise exceptions on some archs that are unable to correct the unaligned access or perform a different memory access to the actual requested one and such. i) Unaligned load with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x42533a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+11 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (61) r1 = *(u32 *)(r0 +0) 8: (35) if r1 >= 0xb goto pc+9 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=10 R10=fp 9: (07) r0 += 3 10: (79) r7 = *(u64 *)(r0 +0) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R10=fp 11: (79) r7 = *(u64 *)(r0 +2) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R7=inv R10=fp [...] ii) Unaligned store with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x4df16a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+19 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (07) r0 += 3 8: (7a) *(u64 *)(r0 +0) = 42 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 9: (7a) *(u64 *)(r0 +2) = 43 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 10: (7a) *(u64 *)(r0 -2) = 44 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp [...] For the PTR_TO_PACKET type, reg->id is initially zero when skb->data was fetched, it later receives a reg->id from env->id_gen generator once another register with UNKNOWN_VALUE type was added to it via check_packet_ptr_add(). The purpose of this reg->id is twofold: i) it is used in find_good_pkt_pointers() for setting the allowed access range for regs with PTR_TO_PACKET of same id once verifier matched on data/data_end tests, and ii) for check_ptr_alignment() to determine that when not having efficient unaligned access and register with UNKNOWN_VALUE was added to PTR_TO_PACKET, that we're only allowed to access the content bytewise due to unknown unalignment. reg->id was never intended for PTR_TO_MAP_VALUE{,_ADJ} types and thus is always zero, the only marking is in PTR_TO_MAP_VALUE_OR_NULL that was added after 484611357c19 via 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers"). Above tests will fail for non-root environment due to prohibited pointer arithmetic. The fix splits register-type specific checks into their own helper instead of keeping them combined, so we don't run into a similar issue in future once we extend check_ptr_alignment() further and forget to add reg->type checks for some of the checks. Fixes: 484611357c19 ("bpf: allow access into map value arrays") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Josef Bacik <jbacik@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 00:24:03 +00:00
return -EACCES;
}
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
return 0;
}
static int check_ptr_alignment(struct bpf_verifier_env *env,
const struct bpf_reg_state *reg,
bpf, verifier: fix rejection of unaligned access checks for map_value_adj Currently, the verifier doesn't reject unaligned access for map_value_adj register types. Commit 484611357c19 ("bpf: allow access into map value arrays") added logic to check_ptr_alignment() extending it from PTR_TO_PACKET to also PTR_TO_MAP_VALUE_ADJ, but for PTR_TO_MAP_VALUE_ADJ no enforcement is in place, because reg->id for PTR_TO_MAP_VALUE_ADJ reg types is never non-zero, meaning, we can cause BPF_H/_W/_DW-based unaligned access for architectures not supporting efficient unaligned access, and thus worst case could raise exceptions on some archs that are unable to correct the unaligned access or perform a different memory access to the actual requested one and such. i) Unaligned load with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x42533a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+11 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (61) r1 = *(u32 *)(r0 +0) 8: (35) if r1 >= 0xb goto pc+9 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=10 R10=fp 9: (07) r0 += 3 10: (79) r7 = *(u64 *)(r0 +0) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R10=fp 11: (79) r7 = *(u64 *)(r0 +2) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R7=inv R10=fp [...] ii) Unaligned store with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x4df16a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+19 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (07) r0 += 3 8: (7a) *(u64 *)(r0 +0) = 42 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 9: (7a) *(u64 *)(r0 +2) = 43 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 10: (7a) *(u64 *)(r0 -2) = 44 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp [...] For the PTR_TO_PACKET type, reg->id is initially zero when skb->data was fetched, it later receives a reg->id from env->id_gen generator once another register with UNKNOWN_VALUE type was added to it via check_packet_ptr_add(). The purpose of this reg->id is twofold: i) it is used in find_good_pkt_pointers() for setting the allowed access range for regs with PTR_TO_PACKET of same id once verifier matched on data/data_end tests, and ii) for check_ptr_alignment() to determine that when not having efficient unaligned access and register with UNKNOWN_VALUE was added to PTR_TO_PACKET, that we're only allowed to access the content bytewise due to unknown unalignment. reg->id was never intended for PTR_TO_MAP_VALUE{,_ADJ} types and thus is always zero, the only marking is in PTR_TO_MAP_VALUE_OR_NULL that was added after 484611357c19 via 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers"). Above tests will fail for non-root environment due to prohibited pointer arithmetic. The fix splits register-type specific checks into their own helper instead of keeping them combined, so we don't run into a similar issue in future once we extend check_ptr_alignment() further and forget to add reg->type checks for some of the checks. Fixes: 484611357c19 ("bpf: allow access into map value arrays") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Josef Bacik <jbacik@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 00:24:03 +00:00
int off, int size)
{
bool strict = env->strict_alignment;
const char *pointer_desc = "";
bpf: Track alignment of register values in the verifier. Currently if we add only constant values to pointers we can fully validate the alignment, and properly check if we need to reject the program on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures. However, once an unknown value is introduced we only allow byte sized memory accesses which is too restrictive. Add logic to track the known minimum alignment of register values, and propagate this state into registers containing pointers. The most common paradigm that makes use of this new logic is computing the transport header using the IP header length field. For example: struct ethhdr *ep = skb->data; struct iphdr *iph = (struct iphdr *) (ep + 1); struct tcphdr *th; ... n = iph->ihl; th = ((void *)iph + (n * 4)); port = th->dest; The existing code will reject the load of th->dest because it cannot validate that the alignment is at least 2 once "n * 4" is added the the packet pointer. In the new code, the register holding "n * 4" will have a reg->min_align value of 4, because any value multiplied by 4 will be at least 4 byte aligned. (actually, the eBPF code emitted by the compiler in this case is most likely to use a shift left by 2, but the end result is identical) At the critical addition: th = ((void *)iph + (n * 4)); The register holding 'th' will start with reg->off value of 14. The pointer addition will transform that reg into something that looks like: reg->aux_off = 14 reg->aux_off_align = 4 Next, the verifier will look at the th->dest load, and it will see a load offset of 2, and first check: if (reg->aux_off_align % size) which will pass because aux_off_align is 4. reg_off will be computed: reg_off = reg->off; ... reg_off += reg->aux_off; plus we have off==2, and it will thus check: if ((NET_IP_ALIGN + reg_off + off) % size != 0) which evaluates to: if ((NET_IP_ALIGN + 14 + 2) % size != 0) On strict alignment architectures, NET_IP_ALIGN is 2, thus: if ((2 + 14 + 2) % size != 0) which passes. These pointer transformations and checks work regardless of whether the constant offset or the variable with known alignment is added first to the pointer register. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2017-05-10 18:22:52 +00:00
bpf, verifier: fix rejection of unaligned access checks for map_value_adj Currently, the verifier doesn't reject unaligned access for map_value_adj register types. Commit 484611357c19 ("bpf: allow access into map value arrays") added logic to check_ptr_alignment() extending it from PTR_TO_PACKET to also PTR_TO_MAP_VALUE_ADJ, but for PTR_TO_MAP_VALUE_ADJ no enforcement is in place, because reg->id for PTR_TO_MAP_VALUE_ADJ reg types is never non-zero, meaning, we can cause BPF_H/_W/_DW-based unaligned access for architectures not supporting efficient unaligned access, and thus worst case could raise exceptions on some archs that are unable to correct the unaligned access or perform a different memory access to the actual requested one and such. i) Unaligned load with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x42533a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+11 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (61) r1 = *(u32 *)(r0 +0) 8: (35) if r1 >= 0xb goto pc+9 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=10 R10=fp 9: (07) r0 += 3 10: (79) r7 = *(u64 *)(r0 +0) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R10=fp 11: (79) r7 = *(u64 *)(r0 +2) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R7=inv R10=fp [...] ii) Unaligned store with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x4df16a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+19 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (07) r0 += 3 8: (7a) *(u64 *)(r0 +0) = 42 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 9: (7a) *(u64 *)(r0 +2) = 43 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 10: (7a) *(u64 *)(r0 -2) = 44 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp [...] For the PTR_TO_PACKET type, reg->id is initially zero when skb->data was fetched, it later receives a reg->id from env->id_gen generator once another register with UNKNOWN_VALUE type was added to it via check_packet_ptr_add(). The purpose of this reg->id is twofold: i) it is used in find_good_pkt_pointers() for setting the allowed access range for regs with PTR_TO_PACKET of same id once verifier matched on data/data_end tests, and ii) for check_ptr_alignment() to determine that when not having efficient unaligned access and register with UNKNOWN_VALUE was added to PTR_TO_PACKET, that we're only allowed to access the content bytewise due to unknown unalignment. reg->id was never intended for PTR_TO_MAP_VALUE{,_ADJ} types and thus is always zero, the only marking is in PTR_TO_MAP_VALUE_OR_NULL that was added after 484611357c19 via 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers"). Above tests will fail for non-root environment due to prohibited pointer arithmetic. The fix splits register-type specific checks into their own helper instead of keeping them combined, so we don't run into a similar issue in future once we extend check_ptr_alignment() further and forget to add reg->type checks for some of the checks. Fixes: 484611357c19 ("bpf: allow access into map value arrays") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Josef Bacik <jbacik@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 00:24:03 +00:00
switch (reg->type) {
case PTR_TO_PACKET:
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
case PTR_TO_PACKET_META:
/* Special case, because of NET_IP_ALIGN. Given metadata sits
* right in front, treat it the very same way.
*/
return check_pkt_ptr_alignment(env, reg, off, size, strict);
case PTR_TO_MAP_VALUE:
pointer_desc = "value ";
break;
case PTR_TO_CTX:
pointer_desc = "context ";
break;
case PTR_TO_STACK:
pointer_desc = "stack ";
/* The stack spill tracking logic in check_stack_write()
* and check_stack_read() relies on stack accesses being
* aligned.
*/
strict = true;
break;
bpf, verifier: fix rejection of unaligned access checks for map_value_adj Currently, the verifier doesn't reject unaligned access for map_value_adj register types. Commit 484611357c19 ("bpf: allow access into map value arrays") added logic to check_ptr_alignment() extending it from PTR_TO_PACKET to also PTR_TO_MAP_VALUE_ADJ, but for PTR_TO_MAP_VALUE_ADJ no enforcement is in place, because reg->id for PTR_TO_MAP_VALUE_ADJ reg types is never non-zero, meaning, we can cause BPF_H/_W/_DW-based unaligned access for architectures not supporting efficient unaligned access, and thus worst case could raise exceptions on some archs that are unable to correct the unaligned access or perform a different memory access to the actual requested one and such. i) Unaligned load with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x42533a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+11 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (61) r1 = *(u32 *)(r0 +0) 8: (35) if r1 >= 0xb goto pc+9 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=10 R10=fp 9: (07) r0 += 3 10: (79) r7 = *(u64 *)(r0 +0) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R10=fp 11: (79) r7 = *(u64 *)(r0 +2) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R7=inv R10=fp [...] ii) Unaligned store with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x4df16a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+19 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (07) r0 += 3 8: (7a) *(u64 *)(r0 +0) = 42 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 9: (7a) *(u64 *)(r0 +2) = 43 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 10: (7a) *(u64 *)(r0 -2) = 44 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp [...] For the PTR_TO_PACKET type, reg->id is initially zero when skb->data was fetched, it later receives a reg->id from env->id_gen generator once another register with UNKNOWN_VALUE type was added to it via check_packet_ptr_add(). The purpose of this reg->id is twofold: i) it is used in find_good_pkt_pointers() for setting the allowed access range for regs with PTR_TO_PACKET of same id once verifier matched on data/data_end tests, and ii) for check_ptr_alignment() to determine that when not having efficient unaligned access and register with UNKNOWN_VALUE was added to PTR_TO_PACKET, that we're only allowed to access the content bytewise due to unknown unalignment. reg->id was never intended for PTR_TO_MAP_VALUE{,_ADJ} types and thus is always zero, the only marking is in PTR_TO_MAP_VALUE_OR_NULL that was added after 484611357c19 via 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers"). Above tests will fail for non-root environment due to prohibited pointer arithmetic. The fix splits register-type specific checks into their own helper instead of keeping them combined, so we don't run into a similar issue in future once we extend check_ptr_alignment() further and forget to add reg->type checks for some of the checks. Fixes: 484611357c19 ("bpf: allow access into map value arrays") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Josef Bacik <jbacik@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 00:24:03 +00:00
default:
break;
bpf, verifier: fix rejection of unaligned access checks for map_value_adj Currently, the verifier doesn't reject unaligned access for map_value_adj register types. Commit 484611357c19 ("bpf: allow access into map value arrays") added logic to check_ptr_alignment() extending it from PTR_TO_PACKET to also PTR_TO_MAP_VALUE_ADJ, but for PTR_TO_MAP_VALUE_ADJ no enforcement is in place, because reg->id for PTR_TO_MAP_VALUE_ADJ reg types is never non-zero, meaning, we can cause BPF_H/_W/_DW-based unaligned access for architectures not supporting efficient unaligned access, and thus worst case could raise exceptions on some archs that are unable to correct the unaligned access or perform a different memory access to the actual requested one and such. i) Unaligned load with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x42533a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+11 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (61) r1 = *(u32 *)(r0 +0) 8: (35) if r1 >= 0xb goto pc+9 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=10 R10=fp 9: (07) r0 += 3 10: (79) r7 = *(u64 *)(r0 +0) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R10=fp 11: (79) r7 = *(u64 *)(r0 +2) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R7=inv R10=fp [...] ii) Unaligned store with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x4df16a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+19 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (07) r0 += 3 8: (7a) *(u64 *)(r0 +0) = 42 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 9: (7a) *(u64 *)(r0 +2) = 43 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 10: (7a) *(u64 *)(r0 -2) = 44 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp [...] For the PTR_TO_PACKET type, reg->id is initially zero when skb->data was fetched, it later receives a reg->id from env->id_gen generator once another register with UNKNOWN_VALUE type was added to it via check_packet_ptr_add(). The purpose of this reg->id is twofold: i) it is used in find_good_pkt_pointers() for setting the allowed access range for regs with PTR_TO_PACKET of same id once verifier matched on data/data_end tests, and ii) for check_ptr_alignment() to determine that when not having efficient unaligned access and register with UNKNOWN_VALUE was added to PTR_TO_PACKET, that we're only allowed to access the content bytewise due to unknown unalignment. reg->id was never intended for PTR_TO_MAP_VALUE{,_ADJ} types and thus is always zero, the only marking is in PTR_TO_MAP_VALUE_OR_NULL that was added after 484611357c19 via 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers"). Above tests will fail for non-root environment due to prohibited pointer arithmetic. The fix splits register-type specific checks into their own helper instead of keeping them combined, so we don't run into a similar issue in future once we extend check_ptr_alignment() further and forget to add reg->type checks for some of the checks. Fixes: 484611357c19 ("bpf: allow access into map value arrays") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Josef Bacik <jbacik@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 00:24:03 +00:00
}
return check_generic_ptr_alignment(env, reg, pointer_desc, off, size,
strict);
bpf, verifier: fix rejection of unaligned access checks for map_value_adj Currently, the verifier doesn't reject unaligned access for map_value_adj register types. Commit 484611357c19 ("bpf: allow access into map value arrays") added logic to check_ptr_alignment() extending it from PTR_TO_PACKET to also PTR_TO_MAP_VALUE_ADJ, but for PTR_TO_MAP_VALUE_ADJ no enforcement is in place, because reg->id for PTR_TO_MAP_VALUE_ADJ reg types is never non-zero, meaning, we can cause BPF_H/_W/_DW-based unaligned access for architectures not supporting efficient unaligned access, and thus worst case could raise exceptions on some archs that are unable to correct the unaligned access or perform a different memory access to the actual requested one and such. i) Unaligned load with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x42533a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+11 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (61) r1 = *(u32 *)(r0 +0) 8: (35) if r1 >= 0xb goto pc+9 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=10 R10=fp 9: (07) r0 += 3 10: (79) r7 = *(u64 *)(r0 +0) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R10=fp 11: (79) r7 = *(u64 *)(r0 +2) R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R7=inv R10=fp [...] ii) Unaligned store with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on r0 (map_value_adj): 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = 0x4df16a00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+19 R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp 7: (07) r0 += 3 8: (7a) *(u64 *)(r0 +0) = 42 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 9: (7a) *(u64 *)(r0 +2) = 43 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp 10: (7a) *(u64 *)(r0 -2) = 44 R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp [...] For the PTR_TO_PACKET type, reg->id is initially zero when skb->data was fetched, it later receives a reg->id from env->id_gen generator once another register with UNKNOWN_VALUE type was added to it via check_packet_ptr_add(). The purpose of this reg->id is twofold: i) it is used in find_good_pkt_pointers() for setting the allowed access range for regs with PTR_TO_PACKET of same id once verifier matched on data/data_end tests, and ii) for check_ptr_alignment() to determine that when not having efficient unaligned access and register with UNKNOWN_VALUE was added to PTR_TO_PACKET, that we're only allowed to access the content bytewise due to unknown unalignment. reg->id was never intended for PTR_TO_MAP_VALUE{,_ADJ} types and thus is always zero, the only marking is in PTR_TO_MAP_VALUE_OR_NULL that was added after 484611357c19 via 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers"). Above tests will fail for non-root environment due to prohibited pointer arithmetic. The fix splits register-type specific checks into their own helper instead of keeping them combined, so we don't run into a similar issue in future once we extend check_ptr_alignment() further and forget to add reg->type checks for some of the checks. Fixes: 484611357c19 ("bpf: allow access into map value arrays") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Josef Bacik <jbacik@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 00:24:03 +00:00
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
static int update_stack_depth(struct bpf_verifier_env *env,
const struct bpf_func_state *func,
int off)
{
u16 stack = env->subprog_stack_depth[func->subprogno];
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
if (stack >= -off)
return 0;
/* update known max for given subprogram */
env->subprog_stack_depth[func->subprogno] = -off;
return 0;
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
/* starting from main bpf function walk all instructions of the function
* and recursively walk all callees that given function can call.
* Ignore jump and exit insns.
* Since recursion is prevented by check_cfg() this algorithm
* only needs a local stack of MAX_CALL_FRAMES to remember callsites
*/
static int check_max_stack_depth(struct bpf_verifier_env *env)
{
int depth = 0, frame = 0, subprog = 0, i = 0, subprog_end;
struct bpf_insn *insn = env->prog->insnsi;
int insn_cnt = env->prog->len;
int ret_insn[MAX_CALL_FRAMES];
int ret_prog[MAX_CALL_FRAMES];
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
process_func:
/* round up to 32-bytes, since this is granularity
* of interpreter stack size
*/
depth += round_up(max_t(u32, env->subprog_stack_depth[subprog], 1), 32);
if (depth > MAX_BPF_STACK) {
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
verbose(env, "combined stack size of %d calls is %d. Too large\n",
frame + 1, depth);
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
return -EACCES;
}
continue_func:
if (env->subprog_cnt == subprog)
subprog_end = insn_cnt;
else
subprog_end = env->subprog_starts[subprog];
for (; i < subprog_end; i++) {
if (insn[i].code != (BPF_JMP | BPF_CALL))
continue;
if (insn[i].src_reg != BPF_PSEUDO_CALL)
continue;
/* remember insn and function to return to */
ret_insn[frame] = i + 1;
ret_prog[frame] = subprog;
/* find the callee */
i = i + insn[i].imm + 1;
subprog = find_subprog(env, i);
if (subprog < 0) {
WARN_ONCE(1, "verifier bug. No program starts at insn %d\n",
i);
return -EFAULT;
}
subprog++;
frame++;
if (frame >= MAX_CALL_FRAMES) {
WARN_ONCE(1, "verifier bug. Call stack is too deep\n");
return -EFAULT;
}
goto process_func;
}
/* end of for() loop means the last insn of the 'subprog'
* was reached. Doesn't matter whether it was JA or EXIT
*/
if (frame == 0)
return 0;
depth -= round_up(max_t(u32, env->subprog_stack_depth[subprog], 1), 32);
frame--;
i = ret_insn[frame];
subprog = ret_prog[frame];
goto continue_func;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
}
#ifndef CONFIG_BPF_JIT_ALWAYS_ON
static int get_callee_stack_depth(struct bpf_verifier_env *env,
const struct bpf_insn *insn, int idx)
{
int start = idx + insn->imm + 1, subprog;
subprog = find_subprog(env, start);
if (subprog < 0) {
WARN_ONCE(1, "verifier bug. No program starts at insn %d\n",
start);
return -EFAULT;
}
subprog++;
return env->subprog_stack_depth[subprog];
}
#endif
/* truncate register to smaller size (in bytes)
* must be called with size < BPF_REG_SIZE
*/
static void coerce_reg_to_size(struct bpf_reg_state *reg, int size)
{
u64 mask;
/* clear high bits in bit representation */
reg->var_off = tnum_cast(reg->var_off, size);
/* fix arithmetic bounds */
mask = ((u64)1 << (size * 8)) - 1;
if ((reg->umin_value & ~mask) == (reg->umax_value & ~mask)) {
reg->umin_value &= mask;
reg->umax_value &= mask;
} else {
reg->umin_value = 0;
reg->umax_value = mask;
}
reg->smin_value = reg->umin_value;
reg->smax_value = reg->umax_value;
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* check whether memory at (regno + off) is accessible for t = (read | write)
* if t==write, value_regno is a register which value is stored into memory
* if t==read, value_regno is a register which will receive the value from memory
* if t==write && value_regno==-1, some unknown value is stored into memory
* if t==read && value_regno==-1, don't care what we read from memory
*/
static int check_mem_access(struct bpf_verifier_env *env, int insn_idx, u32 regno, int off,
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
int bpf_size, enum bpf_access_type t,
int value_regno)
{
struct bpf_reg_state *regs = cur_regs(env);
struct bpf_reg_state *reg = regs + regno;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
struct bpf_func_state *state;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
int size, err = 0;
size = bpf_size_to_bytes(bpf_size);
if (size < 0)
return size;
/* alignment checks will add in reg->off themselves */
err = check_ptr_alignment(env, reg, off, size);
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
if (err)
return err;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* for access checks, reg->off is just part of off */
off += reg->off;
if (reg->type == PTR_TO_MAP_VALUE) {
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
if (t == BPF_WRITE && value_regno >= 0 &&
is_pointer_value(env, value_regno)) {
verbose(env, "R%d leaks addr into map\n", value_regno);
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
return -EACCES;
}
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the access size to be 0 when accessing the previous argument (arg). Right now, it requires the arg needs to be NULL when size passed is 0 or could be 0. It also requires a non-NULL arg when the size is proved to be non-0. This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior such that for size-0 or possible size-0, it is not required the arg equal to NULL. There are a couple of reasons for this semantics change, and all of them intends to simplify user bpf programs which may improve user experience and/or increase chances of verifier acceptance. Together with the next patch which changes bpf_probe_read arg2 type from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO, the following two examples, which fail the verifier currently, are able to get verifier acceptance. Example 1: unsigned long len = pend - pstart; len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len; len &= MAX_PAYLOAD_LEN; bpf_probe_read(data->payload, len, pstart); It does not have test for "len > 0" and it failed the verifier. Users may not be aware that they have to add this test. Converting the bpf_probe_read helper to have ARG_CONST_SIZE_OR_ZERO helps the above code get verifier acceptance. Example 2: Here is one example where llvm "messed up" the code and the verifier fails. ...... unsigned long len = pend - pstart; if (len > 0 && len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); ...... The compiler generates the following code and verifier fails: ...... 39: (79) r2 = *(u64 *)(r10 -16) 40: (1f) r2 -= r8 41: (bf) r1 = r2 42: (07) r1 += -1 43: (25) if r1 > 0xffe goto pc+3 R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff)) R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0) R8=inv(id=0) R9=inv0 R10=fp0 44: (bf) r1 = r6 45: (bf) r3 = r8 46: (85) call bpf_probe_read#45 R2 min value is negative, either use unsigned or 'var &= const' ...... The compiler optimization is correct. If r1 = 0, r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap. r1 > 0xffe at insn #43 can actually capture both "r1 > 0" and "len <= MAX_PAYLOAD_LEN". This however causes an issue in verifier as the value range of arg2 "r2" does not properly get refined and lead to verification failure. Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO allows the following simplied code: unsigned long len = pend - pstart; if (len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); The llvm compiler will generate less complex code and the verifier is able to verify that the program is okay. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12 22:49:09 +00:00
err = check_map_access(env, regno, off, size, false);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (!err && t == BPF_READ && value_regno >= 0)
mark_reg_unknown(env, regs, value_regno);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
} else if (reg->type == PTR_TO_CTX) {
enum bpf_reg_type reg_type = SCALAR_VALUE;
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
if (t == BPF_WRITE && value_regno >= 0 &&
is_pointer_value(env, value_regno)) {
verbose(env, "R%d leaks addr into ctx\n", value_regno);
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
return -EACCES;
}
/* ctx accesses must be at a fixed offset, so that we can
* determine what type of data were returned.
*/
bpf: disallow arithmetic operations on context pointer Commit f1174f77b50c ("bpf/verifier: rework value tracking") removed the crafty selection of which pointer types are allowed to be modified. This is OK for most pointer types since adjust_ptr_min_max_vals() will catch operations on immutable pointers. One exception is PTR_TO_CTX which is now allowed to be offseted freely. The intent of aforementioned commit was to allow context access via modified registers. The offset passed to ->is_valid_access() verifier callback has been adjusted by the value of the variable offset. What is missing, however, is taking the variable offset into account when the context register is used. Or in terms of the code adding the offset to the value passed to the ->convert_ctx_access() callback. This leads to the following eBPF user code: r1 += 68 r0 = *(u32 *)(r1 + 8) exit being translated to this in kernel space: 0: (07) r1 += 68 1: (61) r0 = *(u32 *)(r1 +180) 2: (95) exit Offset 8 is corresponding to 180 in the kernel, but offset 76 is valid too. Verifier will "accept" access to offset 68+8=76 but then "convert" access to offset 8 as 180. Effective access to offset 248 is beyond the kernel context. (This is a __sk_buff example on a debug-heavy kernel - packet mark is 8 -> 180, 76 would be data.) Dereferencing the modified context pointer is not as easy as dereferencing other types, because we have to translate the access to reading a field in kernel structures which is usually at a different offset and often of a different size. To allow modifying the pointer we would have to make sure that given eBPF instruction will always access the same field or the fields accessed are "compatible" in terms of offset and size... Disallow dereferencing modified context pointers and add to selftests the test case described here. Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 18:16:55 +00:00
if (reg->off) {
verbose(env,
"dereference of modified ctx ptr R%d off=%d+%d, ctx+const is allowed, ctx+const+const is not\n",
bpf: disallow arithmetic operations on context pointer Commit f1174f77b50c ("bpf/verifier: rework value tracking") removed the crafty selection of which pointer types are allowed to be modified. This is OK for most pointer types since adjust_ptr_min_max_vals() will catch operations on immutable pointers. One exception is PTR_TO_CTX which is now allowed to be offseted freely. The intent of aforementioned commit was to allow context access via modified registers. The offset passed to ->is_valid_access() verifier callback has been adjusted by the value of the variable offset. What is missing, however, is taking the variable offset into account when the context register is used. Or in terms of the code adding the offset to the value passed to the ->convert_ctx_access() callback. This leads to the following eBPF user code: r1 += 68 r0 = *(u32 *)(r1 + 8) exit being translated to this in kernel space: 0: (07) r1 += 68 1: (61) r0 = *(u32 *)(r1 +180) 2: (95) exit Offset 8 is corresponding to 180 in the kernel, but offset 76 is valid too. Verifier will "accept" access to offset 68+8=76 but then "convert" access to offset 8 as 180. Effective access to offset 248 is beyond the kernel context. (This is a __sk_buff example on a debug-heavy kernel - packet mark is 8 -> 180, 76 would be data.) Dereferencing the modified context pointer is not as easy as dereferencing other types, because we have to translate the access to reading a field in kernel structures which is usually at a different offset and often of a different size. To allow modifying the pointer we would have to make sure that given eBPF instruction will always access the same field or the fields accessed are "compatible" in terms of offset and size... Disallow dereferencing modified context pointers and add to selftests the test case described here. Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 18:16:55 +00:00
regno, reg->off, off - reg->off);
return -EACCES;
}
if (!tnum_is_const(reg->var_off) || reg->var_off.value) {
char tn_buf[48];
tnum_strn(tn_buf, sizeof(tn_buf), reg->var_off);
verbose(env,
"variable ctx access var_off=%s off=%d size=%d",
tn_buf, off, size);
return -EACCES;
}
err = check_ctx_access(env, insn_idx, off, size, t, &reg_type);
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
if (!err && t == BPF_READ && value_regno >= 0) {
/* ctx access returns either a scalar, or a
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
* PTR_TO_PACKET[_META,_END]. In the latter
* case, we know the offset is zero.
*/
if (reg_type == SCALAR_VALUE)
mark_reg_unknown(env, regs, value_regno);
else
mark_reg_known_zero(env, regs,
value_regno);
regs[value_regno].id = 0;
regs[value_regno].off = 0;
regs[value_regno].range = 0;
regs[value_regno].type = reg_type;
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
} else if (reg->type == PTR_TO_STACK) {
/* stack accesses must be at a fixed offset, so that we can
* determine what type of data were returned.
* See check_stack_read().
*/
if (!tnum_is_const(reg->var_off)) {
char tn_buf[48];
tnum_strn(tn_buf, sizeof(tn_buf), reg->var_off);
verbose(env, "variable stack access var_off=%s off=%d size=%d",
tn_buf, off, size);
return -EACCES;
}
off += reg->var_off.value;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (off >= 0 || off < -MAX_BPF_STACK) {
verbose(env, "invalid stack off=%d size=%d\n", off,
size);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EACCES;
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
state = func(env, reg);
err = update_stack_depth(env, state, off);
if (err)
return err;
if (t == BPF_WRITE)
err = check_stack_write(env, state, off, size,
value_regno);
else
err = check_stack_read(env, state, off, size,
value_regno);
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
} else if (reg_is_pkt_pointer(reg)) {
if (t == BPF_WRITE && !may_access_direct_pkt_data(env, NULL, t)) {
verbose(env, "cannot write into packet\n");
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
return -EACCES;
}
if (t == BPF_WRITE && value_regno >= 0 &&
is_pointer_value(env, value_regno)) {
verbose(env, "R%d leaks addr into packet\n",
value_regno);
return -EACCES;
}
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the access size to be 0 when accessing the previous argument (arg). Right now, it requires the arg needs to be NULL when size passed is 0 or could be 0. It also requires a non-NULL arg when the size is proved to be non-0. This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior such that for size-0 or possible size-0, it is not required the arg equal to NULL. There are a couple of reasons for this semantics change, and all of them intends to simplify user bpf programs which may improve user experience and/or increase chances of verifier acceptance. Together with the next patch which changes bpf_probe_read arg2 type from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO, the following two examples, which fail the verifier currently, are able to get verifier acceptance. Example 1: unsigned long len = pend - pstart; len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len; len &= MAX_PAYLOAD_LEN; bpf_probe_read(data->payload, len, pstart); It does not have test for "len > 0" and it failed the verifier. Users may not be aware that they have to add this test. Converting the bpf_probe_read helper to have ARG_CONST_SIZE_OR_ZERO helps the above code get verifier acceptance. Example 2: Here is one example where llvm "messed up" the code and the verifier fails. ...... unsigned long len = pend - pstart; if (len > 0 && len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); ...... The compiler generates the following code and verifier fails: ...... 39: (79) r2 = *(u64 *)(r10 -16) 40: (1f) r2 -= r8 41: (bf) r1 = r2 42: (07) r1 += -1 43: (25) if r1 > 0xffe goto pc+3 R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff)) R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0) R8=inv(id=0) R9=inv0 R10=fp0 44: (bf) r1 = r6 45: (bf) r3 = r8 46: (85) call bpf_probe_read#45 R2 min value is negative, either use unsigned or 'var &= const' ...... The compiler optimization is correct. If r1 = 0, r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap. r1 > 0xffe at insn #43 can actually capture both "r1 > 0" and "len <= MAX_PAYLOAD_LEN". This however causes an issue in verifier as the value range of arg2 "r2" does not properly get refined and lead to verification failure. Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO allows the following simplied code: unsigned long len = pend - pstart; if (len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); The llvm compiler will generate less complex code and the verifier is able to verify that the program is okay. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12 22:49:09 +00:00
err = check_packet_access(env, regno, off, size, false);
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
if (!err && t == BPF_READ && value_regno >= 0)
mark_reg_unknown(env, regs, value_regno);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
} else {
verbose(env, "R%d invalid mem access '%s'\n", regno,
reg_type_str[reg->type]);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EACCES;
}
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
if (!err && size < BPF_REG_SIZE && value_regno >= 0 && t == BPF_READ &&
regs[value_regno].type == SCALAR_VALUE) {
/* b/h/w load zero-extends, mark upper bits as known 0 */
coerce_reg_to_size(&regs[value_regno], size);
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return err;
}
static int check_xadd(struct bpf_verifier_env *env, int insn_idx, struct bpf_insn *insn)
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
{
int err;
if ((BPF_SIZE(insn->code) != BPF_W && BPF_SIZE(insn->code) != BPF_DW) ||
insn->imm != 0) {
verbose(env, "BPF_XADD uses reserved fields\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
/* check src1 operand */
err = check_reg_arg(env, insn->src_reg, SRC_OP);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
/* check src2 operand */
err = check_reg_arg(env, insn->dst_reg, SRC_OP);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
bpf: prevent leaking pointer via xadd on unpriviledged Leaking kernel addresses on unpriviledged is generally disallowed, for example, verifier rejects the following: 0: (b7) r0 = 0 1: (18) r2 = 0xffff897e82304400 3: (7b) *(u64 *)(r1 +48) = r2 R2 leaks addr into ctx Doing pointer arithmetic on them is also forbidden, so that they don't turn into unknown value and then get leaked out. However, there's xadd as a special case, where we don't check the src reg for being a pointer register, e.g. the following will pass: 0: (b7) r0 = 0 1: (7b) *(u64 *)(r1 +48) = r0 2: (18) r2 = 0xffff897e82304400 ; map 4: (db) lock *(u64 *)(r1 +48) += r2 5: (95) exit We could store the pointer into skb->cb, loose the type context, and then read it out from there again to leak it eventually out of a map value. Or more easily in a different variant, too: 0: (bf) r6 = r1 1: (7a) *(u64 *)(r10 -8) = 0 2: (bf) r2 = r10 3: (07) r2 += -8 4: (18) r1 = 0x0 6: (85) call bpf_map_lookup_elem#1 7: (15) if r0 == 0x0 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp 8: (b7) r3 = 0 9: (7b) *(u64 *)(r0 +0) = r3 10: (db) lock *(u64 *)(r0 +0) += r6 11: (b7) r0 = 0 12: (95) exit from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp 11: (b7) r0 = 0 12: (95) exit Prevent this by checking xadd src reg for pointer types. Also add a couple of test cases related to this. Fixes: 1be7f75d1668 ("bpf: enable non-root eBPF programs") Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29 01:04:59 +00:00
if (is_pointer_value(env, insn->src_reg)) {
verbose(env, "R%d leaks addr into mem\n", insn->src_reg);
bpf: prevent leaking pointer via xadd on unpriviledged Leaking kernel addresses on unpriviledged is generally disallowed, for example, verifier rejects the following: 0: (b7) r0 = 0 1: (18) r2 = 0xffff897e82304400 3: (7b) *(u64 *)(r1 +48) = r2 R2 leaks addr into ctx Doing pointer arithmetic on them is also forbidden, so that they don't turn into unknown value and then get leaked out. However, there's xadd as a special case, where we don't check the src reg for being a pointer register, e.g. the following will pass: 0: (b7) r0 = 0 1: (7b) *(u64 *)(r1 +48) = r0 2: (18) r2 = 0xffff897e82304400 ; map 4: (db) lock *(u64 *)(r1 +48) += r2 5: (95) exit We could store the pointer into skb->cb, loose the type context, and then read it out from there again to leak it eventually out of a map value. Or more easily in a different variant, too: 0: (bf) r6 = r1 1: (7a) *(u64 *)(r10 -8) = 0 2: (bf) r2 = r10 3: (07) r2 += -8 4: (18) r1 = 0x0 6: (85) call bpf_map_lookup_elem#1 7: (15) if r0 == 0x0 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp 8: (b7) r3 = 0 9: (7b) *(u64 *)(r0 +0) = r3 10: (db) lock *(u64 *)(r0 +0) += r6 11: (b7) r0 = 0 12: (95) exit from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp 11: (b7) r0 = 0 12: (95) exit Prevent this by checking xadd src reg for pointer types. Also add a couple of test cases related to this. Fixes: 1be7f75d1668 ("bpf: enable non-root eBPF programs") Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29 01:04:59 +00:00
return -EACCES;
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* check whether atomic_add can read the memory */
err = check_mem_access(env, insn_idx, insn->dst_reg, insn->off,
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
BPF_SIZE(insn->code), BPF_READ, -1);
if (err)
return err;
/* check whether atomic_add can write into the same memory */
return check_mem_access(env, insn_idx, insn->dst_reg, insn->off,
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
BPF_SIZE(insn->code), BPF_WRITE, -1);
}
/* when register 'regno' is passed into function that will read 'access_size'
* bytes from that pointer, make sure that it's within stack boundary
* and all elements of stack are initialized.
* Unlike most pointer bounds-checking functions, this one doesn't take an
* 'off' argument, so it has to add in reg->off itself.
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
*/
static int check_stack_boundary(struct bpf_verifier_env *env, int regno,
bpf, verifier: add ARG_PTR_TO_RAW_STACK type When passing buffers from eBPF stack space into a helper function, we have ARG_PTR_TO_STACK argument type for helpers available. The verifier makes sure that such buffers are initialized, within boundaries, etc. However, the downside with this is that we have a couple of helper functions such as bpf_skb_load_bytes() that fill out the passed buffer in the expected success case anyway, so zero initializing them prior to the helper call is unneeded/wasted instructions in the eBPF program that can be avoided. Therefore, add a new helper function argument type called ARG_PTR_TO_RAW_STACK. The idea is to skip the STACK_MISC check in check_stack_boundary() and color the related stack slots as STACK_MISC after we checked all call arguments. Helper functions using ARG_PTR_TO_RAW_STACK must make sure that every path of the helper function will fill the provided buffer area, so that we cannot leak any uninitialized stack memory. This f.e. means that error paths need to memset() the buffers, but the expected fast-path doesn't have to do this anymore. Since there's no such helper needing more than at most one ARG_PTR_TO_RAW_STACK argument, we can keep it simple and don't need to check for multiple areas. Should in future such a use-case really appear, we have check_raw_mode() that will make sure we implement support for it first. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-12 22:10:51 +00:00
int access_size, bool zero_size_allowed,
struct bpf_call_arg_meta *meta)
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
{
struct bpf_reg_state *reg = cur_regs(env) + regno;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
struct bpf_func_state *state = func(env, reg);
int off, i, slot, spi;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (reg->type != PTR_TO_STACK) {
/* Allow zero-byte read from NULL, regardless of pointer type */
if (zero_size_allowed && access_size == 0 &&
register_is_null(reg))
return 0;
verbose(env, "R%d type=%s expected=%s\n", regno,
reg_type_str[reg->type],
reg_type_str[PTR_TO_STACK]);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EACCES;
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* Only allow fixed-offset stack reads */
if (!tnum_is_const(reg->var_off)) {
char tn_buf[48];
tnum_strn(tn_buf, sizeof(tn_buf), reg->var_off);
verbose(env, "invalid variable stack read R%d var_off=%s\n",
regno, tn_buf);
return -EACCES;
}
off = reg->off + reg->var_off.value;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (off >= 0 || off < -MAX_BPF_STACK || off + access_size > 0 ||
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the access size to be 0 when accessing the previous argument (arg). Right now, it requires the arg needs to be NULL when size passed is 0 or could be 0. It also requires a non-NULL arg when the size is proved to be non-0. This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior such that for size-0 or possible size-0, it is not required the arg equal to NULL. There are a couple of reasons for this semantics change, and all of them intends to simplify user bpf programs which may improve user experience and/or increase chances of verifier acceptance. Together with the next patch which changes bpf_probe_read arg2 type from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO, the following two examples, which fail the verifier currently, are able to get verifier acceptance. Example 1: unsigned long len = pend - pstart; len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len; len &= MAX_PAYLOAD_LEN; bpf_probe_read(data->payload, len, pstart); It does not have test for "len > 0" and it failed the verifier. Users may not be aware that they have to add this test. Converting the bpf_probe_read helper to have ARG_CONST_SIZE_OR_ZERO helps the above code get verifier acceptance. Example 2: Here is one example where llvm "messed up" the code and the verifier fails. ...... unsigned long len = pend - pstart; if (len > 0 && len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); ...... The compiler generates the following code and verifier fails: ...... 39: (79) r2 = *(u64 *)(r10 -16) 40: (1f) r2 -= r8 41: (bf) r1 = r2 42: (07) r1 += -1 43: (25) if r1 > 0xffe goto pc+3 R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff)) R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0) R8=inv(id=0) R9=inv0 R10=fp0 44: (bf) r1 = r6 45: (bf) r3 = r8 46: (85) call bpf_probe_read#45 R2 min value is negative, either use unsigned or 'var &= const' ...... The compiler optimization is correct. If r1 = 0, r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap. r1 > 0xffe at insn #43 can actually capture both "r1 > 0" and "len <= MAX_PAYLOAD_LEN". This however causes an issue in verifier as the value range of arg2 "r2" does not properly get refined and lead to verification failure. Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO allows the following simplied code: unsigned long len = pend - pstart; if (len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); The llvm compiler will generate less complex code and the verifier is able to verify that the program is okay. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12 22:49:09 +00:00
access_size < 0 || (access_size == 0 && !zero_size_allowed)) {
verbose(env, "invalid stack type R%d off=%d access_size=%d\n",
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
regno, off, access_size);
return -EACCES;
}
bpf, verifier: add ARG_PTR_TO_RAW_STACK type When passing buffers from eBPF stack space into a helper function, we have ARG_PTR_TO_STACK argument type for helpers available. The verifier makes sure that such buffers are initialized, within boundaries, etc. However, the downside with this is that we have a couple of helper functions such as bpf_skb_load_bytes() that fill out the passed buffer in the expected success case anyway, so zero initializing them prior to the helper call is unneeded/wasted instructions in the eBPF program that can be avoided. Therefore, add a new helper function argument type called ARG_PTR_TO_RAW_STACK. The idea is to skip the STACK_MISC check in check_stack_boundary() and color the related stack slots as STACK_MISC after we checked all call arguments. Helper functions using ARG_PTR_TO_RAW_STACK must make sure that every path of the helper function will fill the provided buffer area, so that we cannot leak any uninitialized stack memory. This f.e. means that error paths need to memset() the buffers, but the expected fast-path doesn't have to do this anymore. Since there's no such helper needing more than at most one ARG_PTR_TO_RAW_STACK argument, we can keep it simple and don't need to check for multiple areas. Should in future such a use-case really appear, we have check_raw_mode() that will make sure we implement support for it first. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-12 22:10:51 +00:00
if (meta && meta->raw_mode) {
meta->access_size = access_size;
meta->regno = regno;
return 0;
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
for (i = 0; i < access_size; i++) {
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
u8 *stype;
slot = -(off + i) - 1;
spi = slot / BPF_REG_SIZE;
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
if (state->allocated_stack <= slot)
goto err;
stype = &state->stack[spi].slot_type[slot % BPF_REG_SIZE];
if (*stype == STACK_MISC)
goto mark;
if (*stype == STACK_ZERO) {
/* helper can write anything into the stack */
*stype = STACK_MISC;
goto mark;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
err:
verbose(env, "invalid indirect read from stack off %d+%d size %d\n",
off, i, access_size);
return -EACCES;
mark:
/* reading any byte out of 8-byte 'spill_slot' will cause
* the whole slot to be marked as 'read'
*/
mark_stack_slot_read(env, env->cur_state, env->cur_state->parent,
spi, state->frameno);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
return update_stack_depth(env, state, off);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
bpf: allow helpers access to variable memory Currently, helpers that read and write from/to the stack can do so using a pair of arguments of type ARG_PTR_TO_STACK and ARG_CONST_STACK_SIZE. ARG_CONST_STACK_SIZE accepts a constant register of type CONST_IMM, so that the verifier can safely check the memory access. However, requiring the argument to be a constant can be limiting in some circumstances. Since the current logic keeps track of the minimum and maximum value of a register throughout the simulated execution, ARG_CONST_STACK_SIZE can be changed to also accept an UNKNOWN_VALUE register in case its boundaries have been set and the range doesn't cause invalid memory accesses. One common situation when this is useful: int len; char buf[BUFSIZE]; /* BUFSIZE is 128 */ if (some_condition) len = 42; else len = 84; some_helper(..., buf, len & (BUFSIZE - 1)); The compiler can often decide to assign the constant values 42 or 48 into a variable on the stack, instead of keeping it in a register. When the variable is then read back from stack into the register in order to be passed to the helper, the verifier will not be able to recognize the register as constant (the verifier is not currently tracking all constant writes into memory), and the program won't be valid. However, by allowing the helper to accept an UNKNOWN_VALUE register, this program will work because the bitwise AND operation will set the range of possible values for the UNKNOWN_VALUE register to [0, BUFSIZE), so the verifier can guarantee the helper call will be safe (assuming the argument is of type ARG_CONST_STACK_SIZE_OR_ZERO, otherwise one more check against 0 would be needed). Custom ranges can be set not only with ALU operations, but also by explicitly comparing the UNKNOWN_VALUE register with constants. Another very common example happens when intercepting system call arguments and accessing user-provided data of variable size using bpf_probe_read(). One can load at runtime the user-provided length in an UNKNOWN_VALUE register, and then read that exact amount of data up to a compile-time determined limit in order to fit into the proper local storage allocated on the stack, without having to guess a suboptimal access size at compile time. Also, in case the helpers accepting the UNKNOWN_VALUE register operate in raw mode, disable the raw mode so that the program is required to initialize all memory, since there is no guarantee the helper will fill it completely, leaving possibilities for data leak (just relevant when the memory used by the helper is the stack, not when using a pointer to map element value or packet). In other words, ARG_PTR_TO_RAW_STACK will be treated as ARG_PTR_TO_STACK. Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09 18:19:49 +00:00
static int check_helper_mem_access(struct bpf_verifier_env *env, int regno,
int access_size, bool zero_size_allowed,
struct bpf_call_arg_meta *meta)
{
struct bpf_reg_state *regs = cur_regs(env), *reg = &regs[regno];
bpf: allow helpers access to variable memory Currently, helpers that read and write from/to the stack can do so using a pair of arguments of type ARG_PTR_TO_STACK and ARG_CONST_STACK_SIZE. ARG_CONST_STACK_SIZE accepts a constant register of type CONST_IMM, so that the verifier can safely check the memory access. However, requiring the argument to be a constant can be limiting in some circumstances. Since the current logic keeps track of the minimum and maximum value of a register throughout the simulated execution, ARG_CONST_STACK_SIZE can be changed to also accept an UNKNOWN_VALUE register in case its boundaries have been set and the range doesn't cause invalid memory accesses. One common situation when this is useful: int len; char buf[BUFSIZE]; /* BUFSIZE is 128 */ if (some_condition) len = 42; else len = 84; some_helper(..., buf, len & (BUFSIZE - 1)); The compiler can often decide to assign the constant values 42 or 48 into a variable on the stack, instead of keeping it in a register. When the variable is then read back from stack into the register in order to be passed to the helper, the verifier will not be able to recognize the register as constant (the verifier is not currently tracking all constant writes into memory), and the program won't be valid. However, by allowing the helper to accept an UNKNOWN_VALUE register, this program will work because the bitwise AND operation will set the range of possible values for the UNKNOWN_VALUE register to [0, BUFSIZE), so the verifier can guarantee the helper call will be safe (assuming the argument is of type ARG_CONST_STACK_SIZE_OR_ZERO, otherwise one more check against 0 would be needed). Custom ranges can be set not only with ALU operations, but also by explicitly comparing the UNKNOWN_VALUE register with constants. Another very common example happens when intercepting system call arguments and accessing user-provided data of variable size using bpf_probe_read(). One can load at runtime the user-provided length in an UNKNOWN_VALUE register, and then read that exact amount of data up to a compile-time determined limit in order to fit into the proper local storage allocated on the stack, without having to guess a suboptimal access size at compile time. Also, in case the helpers accepting the UNKNOWN_VALUE register operate in raw mode, disable the raw mode so that the program is required to initialize all memory, since there is no guarantee the helper will fill it completely, leaving possibilities for data leak (just relevant when the memory used by the helper is the stack, not when using a pointer to map element value or packet). In other words, ARG_PTR_TO_RAW_STACK will be treated as ARG_PTR_TO_STACK. Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09 18:19:49 +00:00
switch (reg->type) {
bpf: allow helpers access to variable memory Currently, helpers that read and write from/to the stack can do so using a pair of arguments of type ARG_PTR_TO_STACK and ARG_CONST_STACK_SIZE. ARG_CONST_STACK_SIZE accepts a constant register of type CONST_IMM, so that the verifier can safely check the memory access. However, requiring the argument to be a constant can be limiting in some circumstances. Since the current logic keeps track of the minimum and maximum value of a register throughout the simulated execution, ARG_CONST_STACK_SIZE can be changed to also accept an UNKNOWN_VALUE register in case its boundaries have been set and the range doesn't cause invalid memory accesses. One common situation when this is useful: int len; char buf[BUFSIZE]; /* BUFSIZE is 128 */ if (some_condition) len = 42; else len = 84; some_helper(..., buf, len & (BUFSIZE - 1)); The compiler can often decide to assign the constant values 42 or 48 into a variable on the stack, instead of keeping it in a register. When the variable is then read back from stack into the register in order to be passed to the helper, the verifier will not be able to recognize the register as constant (the verifier is not currently tracking all constant writes into memory), and the program won't be valid. However, by allowing the helper to accept an UNKNOWN_VALUE register, this program will work because the bitwise AND operation will set the range of possible values for the UNKNOWN_VALUE register to [0, BUFSIZE), so the verifier can guarantee the helper call will be safe (assuming the argument is of type ARG_CONST_STACK_SIZE_OR_ZERO, otherwise one more check against 0 would be needed). Custom ranges can be set not only with ALU operations, but also by explicitly comparing the UNKNOWN_VALUE register with constants. Another very common example happens when intercepting system call arguments and accessing user-provided data of variable size using bpf_probe_read(). One can load at runtime the user-provided length in an UNKNOWN_VALUE register, and then read that exact amount of data up to a compile-time determined limit in order to fit into the proper local storage allocated on the stack, without having to guess a suboptimal access size at compile time. Also, in case the helpers accepting the UNKNOWN_VALUE register operate in raw mode, disable the raw mode so that the program is required to initialize all memory, since there is no guarantee the helper will fill it completely, leaving possibilities for data leak (just relevant when the memory used by the helper is the stack, not when using a pointer to map element value or packet). In other words, ARG_PTR_TO_RAW_STACK will be treated as ARG_PTR_TO_STACK. Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09 18:19:49 +00:00
case PTR_TO_PACKET:
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
case PTR_TO_PACKET_META:
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the access size to be 0 when accessing the previous argument (arg). Right now, it requires the arg needs to be NULL when size passed is 0 or could be 0. It also requires a non-NULL arg when the size is proved to be non-0. This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior such that for size-0 or possible size-0, it is not required the arg equal to NULL. There are a couple of reasons for this semantics change, and all of them intends to simplify user bpf programs which may improve user experience and/or increase chances of verifier acceptance. Together with the next patch which changes bpf_probe_read arg2 type from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO, the following two examples, which fail the verifier currently, are able to get verifier acceptance. Example 1: unsigned long len = pend - pstart; len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len; len &= MAX_PAYLOAD_LEN; bpf_probe_read(data->payload, len, pstart); It does not have test for "len > 0" and it failed the verifier. Users may not be aware that they have to add this test. Converting the bpf_probe_read helper to have ARG_CONST_SIZE_OR_ZERO helps the above code get verifier acceptance. Example 2: Here is one example where llvm "messed up" the code and the verifier fails. ...... unsigned long len = pend - pstart; if (len > 0 && len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); ...... The compiler generates the following code and verifier fails: ...... 39: (79) r2 = *(u64 *)(r10 -16) 40: (1f) r2 -= r8 41: (bf) r1 = r2 42: (07) r1 += -1 43: (25) if r1 > 0xffe goto pc+3 R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff)) R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0) R8=inv(id=0) R9=inv0 R10=fp0 44: (bf) r1 = r6 45: (bf) r3 = r8 46: (85) call bpf_probe_read#45 R2 min value is negative, either use unsigned or 'var &= const' ...... The compiler optimization is correct. If r1 = 0, r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap. r1 > 0xffe at insn #43 can actually capture both "r1 > 0" and "len <= MAX_PAYLOAD_LEN". This however causes an issue in verifier as the value range of arg2 "r2" does not properly get refined and lead to verification failure. Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO allows the following simplied code: unsigned long len = pend - pstart; if (len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); The llvm compiler will generate less complex code and the verifier is able to verify that the program is okay. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12 22:49:09 +00:00
return check_packet_access(env, regno, reg->off, access_size,
zero_size_allowed);
bpf: allow helpers access to variable memory Currently, helpers that read and write from/to the stack can do so using a pair of arguments of type ARG_PTR_TO_STACK and ARG_CONST_STACK_SIZE. ARG_CONST_STACK_SIZE accepts a constant register of type CONST_IMM, so that the verifier can safely check the memory access. However, requiring the argument to be a constant can be limiting in some circumstances. Since the current logic keeps track of the minimum and maximum value of a register throughout the simulated execution, ARG_CONST_STACK_SIZE can be changed to also accept an UNKNOWN_VALUE register in case its boundaries have been set and the range doesn't cause invalid memory accesses. One common situation when this is useful: int len; char buf[BUFSIZE]; /* BUFSIZE is 128 */ if (some_condition) len = 42; else len = 84; some_helper(..., buf, len & (BUFSIZE - 1)); The compiler can often decide to assign the constant values 42 or 48 into a variable on the stack, instead of keeping it in a register. When the variable is then read back from stack into the register in order to be passed to the helper, the verifier will not be able to recognize the register as constant (the verifier is not currently tracking all constant writes into memory), and the program won't be valid. However, by allowing the helper to accept an UNKNOWN_VALUE register, this program will work because the bitwise AND operation will set the range of possible values for the UNKNOWN_VALUE register to [0, BUFSIZE), so the verifier can guarantee the helper call will be safe (assuming the argument is of type ARG_CONST_STACK_SIZE_OR_ZERO, otherwise one more check against 0 would be needed). Custom ranges can be set not only with ALU operations, but also by explicitly comparing the UNKNOWN_VALUE register with constants. Another very common example happens when intercepting system call arguments and accessing user-provided data of variable size using bpf_probe_read(). One can load at runtime the user-provided length in an UNKNOWN_VALUE register, and then read that exact amount of data up to a compile-time determined limit in order to fit into the proper local storage allocated on the stack, without having to guess a suboptimal access size at compile time. Also, in case the helpers accepting the UNKNOWN_VALUE register operate in raw mode, disable the raw mode so that the program is required to initialize all memory, since there is no guarantee the helper will fill it completely, leaving possibilities for data leak (just relevant when the memory used by the helper is the stack, not when using a pointer to map element value or packet). In other words, ARG_PTR_TO_RAW_STACK will be treated as ARG_PTR_TO_STACK. Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09 18:19:49 +00:00
case PTR_TO_MAP_VALUE:
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the access size to be 0 when accessing the previous argument (arg). Right now, it requires the arg needs to be NULL when size passed is 0 or could be 0. It also requires a non-NULL arg when the size is proved to be non-0. This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior such that for size-0 or possible size-0, it is not required the arg equal to NULL. There are a couple of reasons for this semantics change, and all of them intends to simplify user bpf programs which may improve user experience and/or increase chances of verifier acceptance. Together with the next patch which changes bpf_probe_read arg2 type from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO, the following two examples, which fail the verifier currently, are able to get verifier acceptance. Example 1: unsigned long len = pend - pstart; len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len; len &= MAX_PAYLOAD_LEN; bpf_probe_read(data->payload, len, pstart); It does not have test for "len > 0" and it failed the verifier. Users may not be aware that they have to add this test. Converting the bpf_probe_read helper to have ARG_CONST_SIZE_OR_ZERO helps the above code get verifier acceptance. Example 2: Here is one example where llvm "messed up" the code and the verifier fails. ...... unsigned long len = pend - pstart; if (len > 0 && len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); ...... The compiler generates the following code and verifier fails: ...... 39: (79) r2 = *(u64 *)(r10 -16) 40: (1f) r2 -= r8 41: (bf) r1 = r2 42: (07) r1 += -1 43: (25) if r1 > 0xffe goto pc+3 R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff)) R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0) R8=inv(id=0) R9=inv0 R10=fp0 44: (bf) r1 = r6 45: (bf) r3 = r8 46: (85) call bpf_probe_read#45 R2 min value is negative, either use unsigned or 'var &= const' ...... The compiler optimization is correct. If r1 = 0, r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap. r1 > 0xffe at insn #43 can actually capture both "r1 > 0" and "len <= MAX_PAYLOAD_LEN". This however causes an issue in verifier as the value range of arg2 "r2" does not properly get refined and lead to verification failure. Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO allows the following simplied code: unsigned long len = pend - pstart; if (len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); The llvm compiler will generate less complex code and the verifier is able to verify that the program is okay. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12 22:49:09 +00:00
return check_map_access(env, regno, reg->off, access_size,
zero_size_allowed);
default: /* scalar_value|ptr_to_stack or invalid ptr */
bpf: allow helpers access to variable memory Currently, helpers that read and write from/to the stack can do so using a pair of arguments of type ARG_PTR_TO_STACK and ARG_CONST_STACK_SIZE. ARG_CONST_STACK_SIZE accepts a constant register of type CONST_IMM, so that the verifier can safely check the memory access. However, requiring the argument to be a constant can be limiting in some circumstances. Since the current logic keeps track of the minimum and maximum value of a register throughout the simulated execution, ARG_CONST_STACK_SIZE can be changed to also accept an UNKNOWN_VALUE register in case its boundaries have been set and the range doesn't cause invalid memory accesses. One common situation when this is useful: int len; char buf[BUFSIZE]; /* BUFSIZE is 128 */ if (some_condition) len = 42; else len = 84; some_helper(..., buf, len & (BUFSIZE - 1)); The compiler can often decide to assign the constant values 42 or 48 into a variable on the stack, instead of keeping it in a register. When the variable is then read back from stack into the register in order to be passed to the helper, the verifier will not be able to recognize the register as constant (the verifier is not currently tracking all constant writes into memory), and the program won't be valid. However, by allowing the helper to accept an UNKNOWN_VALUE register, this program will work because the bitwise AND operation will set the range of possible values for the UNKNOWN_VALUE register to [0, BUFSIZE), so the verifier can guarantee the helper call will be safe (assuming the argument is of type ARG_CONST_STACK_SIZE_OR_ZERO, otherwise one more check against 0 would be needed). Custom ranges can be set not only with ALU operations, but also by explicitly comparing the UNKNOWN_VALUE register with constants. Another very common example happens when intercepting system call arguments and accessing user-provided data of variable size using bpf_probe_read(). One can load at runtime the user-provided length in an UNKNOWN_VALUE register, and then read that exact amount of data up to a compile-time determined limit in order to fit into the proper local storage allocated on the stack, without having to guess a suboptimal access size at compile time. Also, in case the helpers accepting the UNKNOWN_VALUE register operate in raw mode, disable the raw mode so that the program is required to initialize all memory, since there is no guarantee the helper will fill it completely, leaving possibilities for data leak (just relevant when the memory used by the helper is the stack, not when using a pointer to map element value or packet). In other words, ARG_PTR_TO_RAW_STACK will be treated as ARG_PTR_TO_STACK. Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09 18:19:49 +00:00
return check_stack_boundary(env, regno, access_size,
zero_size_allowed, meta);
}
}
static int check_func_arg(struct bpf_verifier_env *env, u32 regno,
enum bpf_arg_type arg_type,
struct bpf_call_arg_meta *meta)
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
{
struct bpf_reg_state *regs = cur_regs(env), *reg = &regs[regno];
enum bpf_reg_type expected_type, type = reg->type;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
int err = 0;
if (arg_type == ARG_DONTCARE)
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return 0;
err = check_reg_arg(env, regno, SRC_OP);
if (err)
return err;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
if (arg_type == ARG_ANYTHING) {
if (is_pointer_value(env, regno)) {
verbose(env, "R%d leaks addr into helper function\n",
regno);
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
return -EACCES;
}
return 0;
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
}
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
if (type_is_pkt_pointer(type) &&
!may_access_direct_pkt_data(env, meta, BPF_READ)) {
verbose(env, "helper access to the packet is not allowed\n");
return -EACCES;
}
if (arg_type == ARG_PTR_TO_MAP_KEY ||
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
arg_type == ARG_PTR_TO_MAP_VALUE) {
expected_type = PTR_TO_STACK;
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
if (!type_is_pkt_pointer(type) &&
type != expected_type)
goto err_type;
} else if (arg_type == ARG_CONST_SIZE ||
arg_type == ARG_CONST_SIZE_OR_ZERO) {
expected_type = SCALAR_VALUE;
if (type != expected_type)
goto err_type;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
} else if (arg_type == ARG_CONST_MAP_PTR) {
expected_type = CONST_PTR_TO_MAP;
if (type != expected_type)
goto err_type;
} else if (arg_type == ARG_PTR_TO_CTX) {
expected_type = PTR_TO_CTX;
if (type != expected_type)
goto err_type;
} else if (arg_type == ARG_PTR_TO_MEM ||
arg_type == ARG_PTR_TO_MEM_OR_NULL ||
arg_type == ARG_PTR_TO_UNINIT_MEM) {
expected_type = PTR_TO_STACK;
/* One exception here. In case function allows for NULL to be
* passed in as argument, it's a SCALAR_VALUE type. Final test
* happens during stack boundary checking.
*/
if (register_is_null(reg) &&
arg_type == ARG_PTR_TO_MEM_OR_NULL)
/* final test in check_stack_boundary() */;
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
else if (!type_is_pkt_pointer(type) &&
type != PTR_TO_MAP_VALUE &&
type != expected_type)
goto err_type;
meta->raw_mode = arg_type == ARG_PTR_TO_UNINIT_MEM;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
} else {
verbose(env, "unsupported arg_type %d\n", arg_type);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EFAULT;
}
if (arg_type == ARG_CONST_MAP_PTR) {
/* bpf_map_xxx(map_ptr) call: remember that map_ptr */
meta->map_ptr = reg->map_ptr;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
} else if (arg_type == ARG_PTR_TO_MAP_KEY) {
/* bpf_map_xxx(..., map_ptr, ..., key) call:
* check that [key, key + map->key_size) are within
* stack limits and initialized
*/
if (!meta->map_ptr) {
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* in function declaration map_ptr must come before
* map_key, so that it's verified and known before
* we have to check map_key here. Otherwise it means
* that kernel subsystem misconfigured verifier
*/
verbose(env, "invalid map_ptr to access map->key\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EACCES;
}
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
if (type_is_pkt_pointer(type))
err = check_packet_access(env, regno, reg->off,
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the access size to be 0 when accessing the previous argument (arg). Right now, it requires the arg needs to be NULL when size passed is 0 or could be 0. It also requires a non-NULL arg when the size is proved to be non-0. This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior such that for size-0 or possible size-0, it is not required the arg equal to NULL. There are a couple of reasons for this semantics change, and all of them intends to simplify user bpf programs which may improve user experience and/or increase chances of verifier acceptance. Together with the next patch which changes bpf_probe_read arg2 type from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO, the following two examples, which fail the verifier currently, are able to get verifier acceptance. Example 1: unsigned long len = pend - pstart; len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len; len &= MAX_PAYLOAD_LEN; bpf_probe_read(data->payload, len, pstart); It does not have test for "len > 0" and it failed the verifier. Users may not be aware that they have to add this test. Converting the bpf_probe_read helper to have ARG_CONST_SIZE_OR_ZERO helps the above code get verifier acceptance. Example 2: Here is one example where llvm "messed up" the code and the verifier fails. ...... unsigned long len = pend - pstart; if (len > 0 && len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); ...... The compiler generates the following code and verifier fails: ...... 39: (79) r2 = *(u64 *)(r10 -16) 40: (1f) r2 -= r8 41: (bf) r1 = r2 42: (07) r1 += -1 43: (25) if r1 > 0xffe goto pc+3 R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff)) R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0) R8=inv(id=0) R9=inv0 R10=fp0 44: (bf) r1 = r6 45: (bf) r3 = r8 46: (85) call bpf_probe_read#45 R2 min value is negative, either use unsigned or 'var &= const' ...... The compiler optimization is correct. If r1 = 0, r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap. r1 > 0xffe at insn #43 can actually capture both "r1 > 0" and "len <= MAX_PAYLOAD_LEN". This however causes an issue in verifier as the value range of arg2 "r2" does not properly get refined and lead to verification failure. Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO allows the following simplied code: unsigned long len = pend - pstart; if (len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); The llvm compiler will generate less complex code and the verifier is able to verify that the program is okay. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12 22:49:09 +00:00
meta->map_ptr->key_size,
false);
else
err = check_stack_boundary(env, regno,
meta->map_ptr->key_size,
false, NULL);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
} else if (arg_type == ARG_PTR_TO_MAP_VALUE) {
/* bpf_map_xxx(..., map_ptr, ..., value) call:
* check [value, value + map->value_size) validity
*/
if (!meta->map_ptr) {
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* kernel subsystem misconfigured verifier */
verbose(env, "invalid map_ptr to access map->value\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EACCES;
}
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
if (type_is_pkt_pointer(type))
err = check_packet_access(env, regno, reg->off,
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the access size to be 0 when accessing the previous argument (arg). Right now, it requires the arg needs to be NULL when size passed is 0 or could be 0. It also requires a non-NULL arg when the size is proved to be non-0. This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior such that for size-0 or possible size-0, it is not required the arg equal to NULL. There are a couple of reasons for this semantics change, and all of them intends to simplify user bpf programs which may improve user experience and/or increase chances of verifier acceptance. Together with the next patch which changes bpf_probe_read arg2 type from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO, the following two examples, which fail the verifier currently, are able to get verifier acceptance. Example 1: unsigned long len = pend - pstart; len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len; len &= MAX_PAYLOAD_LEN; bpf_probe_read(data->payload, len, pstart); It does not have test for "len > 0" and it failed the verifier. Users may not be aware that they have to add this test. Converting the bpf_probe_read helper to have ARG_CONST_SIZE_OR_ZERO helps the above code get verifier acceptance. Example 2: Here is one example where llvm "messed up" the code and the verifier fails. ...... unsigned long len = pend - pstart; if (len > 0 && len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); ...... The compiler generates the following code and verifier fails: ...... 39: (79) r2 = *(u64 *)(r10 -16) 40: (1f) r2 -= r8 41: (bf) r1 = r2 42: (07) r1 += -1 43: (25) if r1 > 0xffe goto pc+3 R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff)) R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0) R8=inv(id=0) R9=inv0 R10=fp0 44: (bf) r1 = r6 45: (bf) r3 = r8 46: (85) call bpf_probe_read#45 R2 min value is negative, either use unsigned or 'var &= const' ...... The compiler optimization is correct. If r1 = 0, r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap. r1 > 0xffe at insn #43 can actually capture both "r1 > 0" and "len <= MAX_PAYLOAD_LEN". This however causes an issue in verifier as the value range of arg2 "r2" does not properly get refined and lead to verification failure. Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO allows the following simplied code: unsigned long len = pend - pstart; if (len <= MAX_PAYLOAD_LEN) bpf_probe_read(data->payload, len, pstart); The llvm compiler will generate less complex code and the verifier is able to verify that the program is okay. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12 22:49:09 +00:00
meta->map_ptr->value_size,
false);
else
err = check_stack_boundary(env, regno,
meta->map_ptr->value_size,
false, NULL);
} else if (arg_type == ARG_CONST_SIZE ||
arg_type == ARG_CONST_SIZE_OR_ZERO) {
bool zero_size_allowed = (arg_type == ARG_CONST_SIZE_OR_ZERO);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* bpf_xxx(..., buf, len) call will access 'len' bytes
* from stack pointer 'buf'. Check it
* note: regno == len, regno - 1 == buf
*/
if (regno == 0) {
/* kernel subsystem misconfigured verifier */
verbose(env,
"ARG_CONST_SIZE cannot be first argument\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EACCES;
}
bpf: allow helpers access to variable memory Currently, helpers that read and write from/to the stack can do so using a pair of arguments of type ARG_PTR_TO_STACK and ARG_CONST_STACK_SIZE. ARG_CONST_STACK_SIZE accepts a constant register of type CONST_IMM, so that the verifier can safely check the memory access. However, requiring the argument to be a constant can be limiting in some circumstances. Since the current logic keeps track of the minimum and maximum value of a register throughout the simulated execution, ARG_CONST_STACK_SIZE can be changed to also accept an UNKNOWN_VALUE register in case its boundaries have been set and the range doesn't cause invalid memory accesses. One common situation when this is useful: int len; char buf[BUFSIZE]; /* BUFSIZE is 128 */ if (some_condition) len = 42; else len = 84; some_helper(..., buf, len & (BUFSIZE - 1)); The compiler can often decide to assign the constant values 42 or 48 into a variable on the stack, instead of keeping it in a register. When the variable is then read back from stack into the register in order to be passed to the helper, the verifier will not be able to recognize the register as constant (the verifier is not currently tracking all constant writes into memory), and the program won't be valid. However, by allowing the helper to accept an UNKNOWN_VALUE register, this program will work because the bitwise AND operation will set the range of possible values for the UNKNOWN_VALUE register to [0, BUFSIZE), so the verifier can guarantee the helper call will be safe (assuming the argument is of type ARG_CONST_STACK_SIZE_OR_ZERO, otherwise one more check against 0 would be needed). Custom ranges can be set not only with ALU operations, but also by explicitly comparing the UNKNOWN_VALUE register with constants. Another very common example happens when intercepting system call arguments and accessing user-provided data of variable size using bpf_probe_read(). One can load at runtime the user-provided length in an UNKNOWN_VALUE register, and then read that exact amount of data up to a compile-time determined limit in order to fit into the proper local storage allocated on the stack, without having to guess a suboptimal access size at compile time. Also, in case the helpers accepting the UNKNOWN_VALUE register operate in raw mode, disable the raw mode so that the program is required to initialize all memory, since there is no guarantee the helper will fill it completely, leaving possibilities for data leak (just relevant when the memory used by the helper is the stack, not when using a pointer to map element value or packet). In other words, ARG_PTR_TO_RAW_STACK will be treated as ARG_PTR_TO_STACK. Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09 18:19:49 +00:00
/* The register is SCALAR_VALUE; the access check
* happens using its boundaries.
bpf: allow helpers access to variable memory Currently, helpers that read and write from/to the stack can do so using a pair of arguments of type ARG_PTR_TO_STACK and ARG_CONST_STACK_SIZE. ARG_CONST_STACK_SIZE accepts a constant register of type CONST_IMM, so that the verifier can safely check the memory access. However, requiring the argument to be a constant can be limiting in some circumstances. Since the current logic keeps track of the minimum and maximum value of a register throughout the simulated execution, ARG_CONST_STACK_SIZE can be changed to also accept an UNKNOWN_VALUE register in case its boundaries have been set and the range doesn't cause invalid memory accesses. One common situation when this is useful: int len; char buf[BUFSIZE]; /* BUFSIZE is 128 */ if (some_condition) len = 42; else len = 84; some_helper(..., buf, len & (BUFSIZE - 1)); The compiler can often decide to assign the constant values 42 or 48 into a variable on the stack, instead of keeping it in a register. When the variable is then read back from stack into the register in order to be passed to the helper, the verifier will not be able to recognize the register as constant (the verifier is not currently tracking all constant writes into memory), and the program won't be valid. However, by allowing the helper to accept an UNKNOWN_VALUE register, this program will work because the bitwise AND operation will set the range of possible values for the UNKNOWN_VALUE register to [0, BUFSIZE), so the verifier can guarantee the helper call will be safe (assuming the argument is of type ARG_CONST_STACK_SIZE_OR_ZERO, otherwise one more check against 0 would be needed). Custom ranges can be set not only with ALU operations, but also by explicitly comparing the UNKNOWN_VALUE register with constants. Another very common example happens when intercepting system call arguments and accessing user-provided data of variable size using bpf_probe_read(). One can load at runtime the user-provided length in an UNKNOWN_VALUE register, and then read that exact amount of data up to a compile-time determined limit in order to fit into the proper local storage allocated on the stack, without having to guess a suboptimal access size at compile time. Also, in case the helpers accepting the UNKNOWN_VALUE register operate in raw mode, disable the raw mode so that the program is required to initialize all memory, since there is no guarantee the helper will fill it completely, leaving possibilities for data leak (just relevant when the memory used by the helper is the stack, not when using a pointer to map element value or packet). In other words, ARG_PTR_TO_RAW_STACK will be treated as ARG_PTR_TO_STACK. Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09 18:19:49 +00:00
*/
if (!tnum_is_const(reg->var_off))
bpf: allow helpers access to variable memory Currently, helpers that read and write from/to the stack can do so using a pair of arguments of type ARG_PTR_TO_STACK and ARG_CONST_STACK_SIZE. ARG_CONST_STACK_SIZE accepts a constant register of type CONST_IMM, so that the verifier can safely check the memory access. However, requiring the argument to be a constant can be limiting in some circumstances. Since the current logic keeps track of the minimum and maximum value of a register throughout the simulated execution, ARG_CONST_STACK_SIZE can be changed to also accept an UNKNOWN_VALUE register in case its boundaries have been set and the range doesn't cause invalid memory accesses. One common situation when this is useful: int len; char buf[BUFSIZE]; /* BUFSIZE is 128 */ if (some_condition) len = 42; else len = 84; some_helper(..., buf, len & (BUFSIZE - 1)); The compiler can often decide to assign the constant values 42 or 48 into a variable on the stack, instead of keeping it in a register. When the variable is then read back from stack into the register in order to be passed to the helper, the verifier will not be able to recognize the register as constant (the verifier is not currently tracking all constant writes into memory), and the program won't be valid. However, by allowing the helper to accept an UNKNOWN_VALUE register, this program will work because the bitwise AND operation will set the range of possible values for the UNKNOWN_VALUE register to [0, BUFSIZE), so the verifier can guarantee the helper call will be safe (assuming the argument is of type ARG_CONST_STACK_SIZE_OR_ZERO, otherwise one more check against 0 would be needed). Custom ranges can be set not only with ALU operations, but also by explicitly comparing the UNKNOWN_VALUE register with constants. Another very common example happens when intercepting system call arguments and accessing user-provided data of variable size using bpf_probe_read(). One can load at runtime the user-provided length in an UNKNOWN_VALUE register, and then read that exact amount of data up to a compile-time determined limit in order to fit into the proper local storage allocated on the stack, without having to guess a suboptimal access size at compile time. Also, in case the helpers accepting the UNKNOWN_VALUE register operate in raw mode, disable the raw mode so that the program is required to initialize all memory, since there is no guarantee the helper will fill it completely, leaving possibilities for data leak (just relevant when the memory used by the helper is the stack, not when using a pointer to map element value or packet). In other words, ARG_PTR_TO_RAW_STACK will be treated as ARG_PTR_TO_STACK. Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09 18:19:49 +00:00
/* For unprivileged variable accesses, disable raw
* mode so that the program is required to
* initialize all the memory that the helper could
* just partially fill up.
*/
meta = NULL;
if (reg->smin_value < 0) {
verbose(env, "R%d min value is negative, either use unsigned or 'var &= const'\n",
regno);
return -EACCES;
}
bpf: allow helpers access to variable memory Currently, helpers that read and write from/to the stack can do so using a pair of arguments of type ARG_PTR_TO_STACK and ARG_CONST_STACK_SIZE. ARG_CONST_STACK_SIZE accepts a constant register of type CONST_IMM, so that the verifier can safely check the memory access. However, requiring the argument to be a constant can be limiting in some circumstances. Since the current logic keeps track of the minimum and maximum value of a register throughout the simulated execution, ARG_CONST_STACK_SIZE can be changed to also accept an UNKNOWN_VALUE register in case its boundaries have been set and the range doesn't cause invalid memory accesses. One common situation when this is useful: int len; char buf[BUFSIZE]; /* BUFSIZE is 128 */ if (some_condition) len = 42; else len = 84; some_helper(..., buf, len & (BUFSIZE - 1)); The compiler can often decide to assign the constant values 42 or 48 into a variable on the stack, instead of keeping it in a register. When the variable is then read back from stack into the register in order to be passed to the helper, the verifier will not be able to recognize the register as constant (the verifier is not currently tracking all constant writes into memory), and the program won't be valid. However, by allowing the helper to accept an UNKNOWN_VALUE register, this program will work because the bitwise AND operation will set the range of possible values for the UNKNOWN_VALUE register to [0, BUFSIZE), so the verifier can guarantee the helper call will be safe (assuming the argument is of type ARG_CONST_STACK_SIZE_OR_ZERO, otherwise one more check against 0 would be needed). Custom ranges can be set not only with ALU operations, but also by explicitly comparing the UNKNOWN_VALUE register with constants. Another very common example happens when intercepting system call arguments and accessing user-provided data of variable size using bpf_probe_read(). One can load at runtime the user-provided length in an UNKNOWN_VALUE register, and then read that exact amount of data up to a compile-time determined limit in order to fit into the proper local storage allocated on the stack, without having to guess a suboptimal access size at compile time. Also, in case the helpers accepting the UNKNOWN_VALUE register operate in raw mode, disable the raw mode so that the program is required to initialize all memory, since there is no guarantee the helper will fill it completely, leaving possibilities for data leak (just relevant when the memory used by the helper is the stack, not when using a pointer to map element value or packet). In other words, ARG_PTR_TO_RAW_STACK will be treated as ARG_PTR_TO_STACK. Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09 18:19:49 +00:00
if (reg->umin_value == 0) {
err = check_helper_mem_access(env, regno - 1, 0,
zero_size_allowed,
meta);
bpf: allow helpers access to variable memory Currently, helpers that read and write from/to the stack can do so using a pair of arguments of type ARG_PTR_TO_STACK and ARG_CONST_STACK_SIZE. ARG_CONST_STACK_SIZE accepts a constant register of type CONST_IMM, so that the verifier can safely check the memory access. However, requiring the argument to be a constant can be limiting in some circumstances. Since the current logic keeps track of the minimum and maximum value of a register throughout the simulated execution, ARG_CONST_STACK_SIZE can be changed to also accept an UNKNOWN_VALUE register in case its boundaries have been set and the range doesn't cause invalid memory accesses. One common situation when this is useful: int len; char buf[BUFSIZE]; /* BUFSIZE is 128 */ if (some_condition) len = 42; else len = 84; some_helper(..., buf, len & (BUFSIZE - 1)); The compiler can often decide to assign the constant values 42 or 48 into a variable on the stack, instead of keeping it in a register. When the variable is then read back from stack into the register in order to be passed to the helper, the verifier will not be able to recognize the register as constant (the verifier is not currently tracking all constant writes into memory), and the program won't be valid. However, by allowing the helper to accept an UNKNOWN_VALUE register, this program will work because the bitwise AND operation will set the range of possible values for the UNKNOWN_VALUE register to [0, BUFSIZE), so the verifier can guarantee the helper call will be safe (assuming the argument is of type ARG_CONST_STACK_SIZE_OR_ZERO, otherwise one more check against 0 would be needed). Custom ranges can be set not only with ALU operations, but also by explicitly comparing the UNKNOWN_VALUE register with constants. Another very common example happens when intercepting system call arguments and accessing user-provided data of variable size using bpf_probe_read(). One can load at runtime the user-provided length in an UNKNOWN_VALUE register, and then read that exact amount of data up to a compile-time determined limit in order to fit into the proper local storage allocated on the stack, without having to guess a suboptimal access size at compile time. Also, in case the helpers accepting the UNKNOWN_VALUE register operate in raw mode, disable the raw mode so that the program is required to initialize all memory, since there is no guarantee the helper will fill it completely, leaving possibilities for data leak (just relevant when the memory used by the helper is the stack, not when using a pointer to map element value or packet). In other words, ARG_PTR_TO_RAW_STACK will be treated as ARG_PTR_TO_STACK. Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09 18:19:49 +00:00
if (err)
return err;
}
if (reg->umax_value >= BPF_MAX_VAR_SIZ) {
verbose(env, "R%d unbounded memory access, use 'var &= const' or 'if (var < const)'\n",
regno);
return -EACCES;
}
err = check_helper_mem_access(env, regno - 1,
reg->umax_value,
zero_size_allowed, meta);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
return err;
err_type:
verbose(env, "R%d type=%s expected=%s\n", regno,
reg_type_str[type], reg_type_str[expected_type]);
return -EACCES;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
static int check_map_func_compatibility(struct bpf_verifier_env *env,
struct bpf_map *map, int func_id)
{
if (!map)
return 0;
/* We need a two way check, first is from map perspective ... */
switch (map->map_type) {
case BPF_MAP_TYPE_PROG_ARRAY:
if (func_id != BPF_FUNC_tail_call)
goto error;
break;
case BPF_MAP_TYPE_PERF_EVENT_ARRAY:
if (func_id != BPF_FUNC_perf_event_read &&
2017-10-05 16:19:20 +00:00
func_id != BPF_FUNC_perf_event_output &&
func_id != BPF_FUNC_perf_event_read_value)
goto error;
break;
case BPF_MAP_TYPE_STACK_TRACE:
if (func_id != BPF_FUNC_get_stackid)
goto error;
break;
case BPF_MAP_TYPE_CGROUP_ARRAY:
if (func_id != BPF_FUNC_skb_under_cgroup &&
func_id != BPF_FUNC_current_task_under_cgroup)
goto error;
break;
/* devmap returns a pointer to a live net_device ifindex that we cannot
* allow to be modified from bpf side. So do not allow lookup elements
* for now.
*/
case BPF_MAP_TYPE_DEVMAP:
if (func_id != BPF_FUNC_redirect_map)
goto error;
break;
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
/* Restrict bpf side of cpumap, open when use-cases appear */
case BPF_MAP_TYPE_CPUMAP:
if (func_id != BPF_FUNC_redirect_map)
goto error;
break;
bpf: Add array of maps support This patch adds a few helper funcs to enable map-in-map support (i.e. outer_map->inner_map). The first outer_map type BPF_MAP_TYPE_ARRAY_OF_MAPS is also added in this patch. The next patch will introduce a hash of maps type. Any bpf map type can be acted as an inner_map. The exception is BPF_MAP_TYPE_PROG_ARRAY because the extra level of indirection makes it harder to verify the owner_prog_type and owner_jited. Multi-level map-in-map is not supported (i.e. map->map is ok but not map->map->map). When adding an inner_map to an outer_map, it currently checks the map_type, key_size, value_size, map_flags, max_entries and ops. The verifier also uses those map's properties to do static analysis. map_flags is needed because we need to ensure BPF_PROG_TYPE_PERF_EVENT is using a preallocated hashtab for the inner_hash also. ops and max_entries are needed to generate inlined map-lookup instructions. For simplicity reason, a simple '==' test is used for both map_flags and max_entries. The equality of ops is implied by the equality of map_type. During outer_map creation time, an inner_map_fd is needed to create an outer_map. However, the inner_map_fd's life time does not depend on the outer_map. The inner_map_fd is merely used to initialize the inner_map_meta of the outer_map. Also, for the outer_map: * It allows element update and delete from syscall * It allows element lookup from bpf_prog The above is similar to the current fd_array pattern. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 17:00:33 +00:00
case BPF_MAP_TYPE_ARRAY_OF_MAPS:
case BPF_MAP_TYPE_HASH_OF_MAPS:
bpf: Add array of maps support This patch adds a few helper funcs to enable map-in-map support (i.e. outer_map->inner_map). The first outer_map type BPF_MAP_TYPE_ARRAY_OF_MAPS is also added in this patch. The next patch will introduce a hash of maps type. Any bpf map type can be acted as an inner_map. The exception is BPF_MAP_TYPE_PROG_ARRAY because the extra level of indirection makes it harder to verify the owner_prog_type and owner_jited. Multi-level map-in-map is not supported (i.e. map->map is ok but not map->map->map). When adding an inner_map to an outer_map, it currently checks the map_type, key_size, value_size, map_flags, max_entries and ops. The verifier also uses those map's properties to do static analysis. map_flags is needed because we need to ensure BPF_PROG_TYPE_PERF_EVENT is using a preallocated hashtab for the inner_hash also. ops and max_entries are needed to generate inlined map-lookup instructions. For simplicity reason, a simple '==' test is used for both map_flags and max_entries. The equality of ops is implied by the equality of map_type. During outer_map creation time, an inner_map_fd is needed to create an outer_map. However, the inner_map_fd's life time does not depend on the outer_map. The inner_map_fd is merely used to initialize the inner_map_meta of the outer_map. Also, for the outer_map: * It allows element update and delete from syscall * It allows element lookup from bpf_prog The above is similar to the current fd_array pattern. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 17:00:33 +00:00
if (func_id != BPF_FUNC_map_lookup_elem)
goto error;
break;
bpf: sockmap with sk redirect support Recently we added a new map type called dev map used to forward XDP packets between ports (6093ec2dc313). This patches introduces a similar notion for sockets. A sockmap allows users to add participating sockets to a map. When sockets are added to the map enough context is stored with the map entry to use the entry with a new helper bpf_sk_redirect_map(map, key, flags) This helper (analogous to bpf_redirect_map in XDP) is given the map and an entry in the map. When called from a sockmap program, discussed below, the skb will be sent on the socket using skb_send_sock(). With the above we need a bpf program to call the helper from that will then implement the send logic. The initial site implemented in this series is the recv_sock hook. For this to work we implemented a map attach command to add attributes to a map. In sockmap we add two programs a parse program and a verdict program. The parse program uses strparser to build messages and pass them to the verdict program. The parse programs use the normal strparser semantics. The verdict program is of type SK_SKB. The verdict program returns a verdict SK_DROP, or SK_REDIRECT for now. Additional actions may be added later. When SK_REDIRECT is returned, expected when bpf program uses bpf_sk_redirect_map(), the sockmap logic will consult per cpu variables set by the helper routine and pull the sock entry out of the sock map. This pattern follows the existing redirect logic in cls and xdp programs. This gives the flow, recv_sock -> str_parser (parse_prog) -> verdict_prog -> skb_send_sock \ -> kfree_skb As an example use case a message based load balancer may use specific logic in the verdict program to select the sock to send on. Sample programs are provided in future patches that hopefully illustrate the user interfaces. Also selftests are in follow-on patches. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16 05:32:47 +00:00
case BPF_MAP_TYPE_SOCKMAP:
if (func_id != BPF_FUNC_sk_redirect_map &&
func_id != BPF_FUNC_sock_map_update &&
func_id != BPF_FUNC_map_delete_elem)
goto error;
break;
default:
break;
}
/* ... and second from the function itself. */
switch (func_id) {
case BPF_FUNC_tail_call:
if (map->map_type != BPF_MAP_TYPE_PROG_ARRAY)
goto error;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
if (env->subprog_cnt) {
verbose(env, "tail_calls are not allowed in programs with bpf-to-bpf calls\n");
return -EINVAL;
}
break;
case BPF_FUNC_perf_event_read:
case BPF_FUNC_perf_event_output:
2017-10-05 16:19:20 +00:00
case BPF_FUNC_perf_event_read_value:
if (map->map_type != BPF_MAP_TYPE_PERF_EVENT_ARRAY)
goto error;
break;
case BPF_FUNC_get_stackid:
if (map->map_type != BPF_MAP_TYPE_STACK_TRACE)
goto error;
break;
case BPF_FUNC_current_task_under_cgroup:
case BPF_FUNC_skb_under_cgroup:
if (map->map_type != BPF_MAP_TYPE_CGROUP_ARRAY)
goto error;
break;
case BPF_FUNC_redirect_map:
if (map->map_type != BPF_MAP_TYPE_DEVMAP &&
map->map_type != BPF_MAP_TYPE_CPUMAP)
goto error;
break;
bpf: sockmap with sk redirect support Recently we added a new map type called dev map used to forward XDP packets between ports (6093ec2dc313). This patches introduces a similar notion for sockets. A sockmap allows users to add participating sockets to a map. When sockets are added to the map enough context is stored with the map entry to use the entry with a new helper bpf_sk_redirect_map(map, key, flags) This helper (analogous to bpf_redirect_map in XDP) is given the map and an entry in the map. When called from a sockmap program, discussed below, the skb will be sent on the socket using skb_send_sock(). With the above we need a bpf program to call the helper from that will then implement the send logic. The initial site implemented in this series is the recv_sock hook. For this to work we implemented a map attach command to add attributes to a map. In sockmap we add two programs a parse program and a verdict program. The parse program uses strparser to build messages and pass them to the verdict program. The parse programs use the normal strparser semantics. The verdict program is of type SK_SKB. The verdict program returns a verdict SK_DROP, or SK_REDIRECT for now. Additional actions may be added later. When SK_REDIRECT is returned, expected when bpf program uses bpf_sk_redirect_map(), the sockmap logic will consult per cpu variables set by the helper routine and pull the sock entry out of the sock map. This pattern follows the existing redirect logic in cls and xdp programs. This gives the flow, recv_sock -> str_parser (parse_prog) -> verdict_prog -> skb_send_sock \ -> kfree_skb As an example use case a message based load balancer may use specific logic in the verdict program to select the sock to send on. Sample programs are provided in future patches that hopefully illustrate the user interfaces. Also selftests are in follow-on patches. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16 05:32:47 +00:00
case BPF_FUNC_sk_redirect_map:
if (map->map_type != BPF_MAP_TYPE_SOCKMAP)
goto error;
break;
case BPF_FUNC_sock_map_update:
if (map->map_type != BPF_MAP_TYPE_SOCKMAP)
goto error;
break;
default:
break;
}
return 0;
error:
verbose(env, "cannot pass map_type %d into func %s#%d\n",
map->map_type, func_id_name(func_id), func_id);
return -EINVAL;
}
bpf, verifier: add ARG_PTR_TO_RAW_STACK type When passing buffers from eBPF stack space into a helper function, we have ARG_PTR_TO_STACK argument type for helpers available. The verifier makes sure that such buffers are initialized, within boundaries, etc. However, the downside with this is that we have a couple of helper functions such as bpf_skb_load_bytes() that fill out the passed buffer in the expected success case anyway, so zero initializing them prior to the helper call is unneeded/wasted instructions in the eBPF program that can be avoided. Therefore, add a new helper function argument type called ARG_PTR_TO_RAW_STACK. The idea is to skip the STACK_MISC check in check_stack_boundary() and color the related stack slots as STACK_MISC after we checked all call arguments. Helper functions using ARG_PTR_TO_RAW_STACK must make sure that every path of the helper function will fill the provided buffer area, so that we cannot leak any uninitialized stack memory. This f.e. means that error paths need to memset() the buffers, but the expected fast-path doesn't have to do this anymore. Since there's no such helper needing more than at most one ARG_PTR_TO_RAW_STACK argument, we can keep it simple and don't need to check for multiple areas. Should in future such a use-case really appear, we have check_raw_mode() that will make sure we implement support for it first. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-12 22:10:51 +00:00
static int check_raw_mode(const struct bpf_func_proto *fn)
{
int count = 0;
if (fn->arg1_type == ARG_PTR_TO_UNINIT_MEM)
bpf, verifier: add ARG_PTR_TO_RAW_STACK type When passing buffers from eBPF stack space into a helper function, we have ARG_PTR_TO_STACK argument type for helpers available. The verifier makes sure that such buffers are initialized, within boundaries, etc. However, the downside with this is that we have a couple of helper functions such as bpf_skb_load_bytes() that fill out the passed buffer in the expected success case anyway, so zero initializing them prior to the helper call is unneeded/wasted instructions in the eBPF program that can be avoided. Therefore, add a new helper function argument type called ARG_PTR_TO_RAW_STACK. The idea is to skip the STACK_MISC check in check_stack_boundary() and color the related stack slots as STACK_MISC after we checked all call arguments. Helper functions using ARG_PTR_TO_RAW_STACK must make sure that every path of the helper function will fill the provided buffer area, so that we cannot leak any uninitialized stack memory. This f.e. means that error paths need to memset() the buffers, but the expected fast-path doesn't have to do this anymore. Since there's no such helper needing more than at most one ARG_PTR_TO_RAW_STACK argument, we can keep it simple and don't need to check for multiple areas. Should in future such a use-case really appear, we have check_raw_mode() that will make sure we implement support for it first. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-12 22:10:51 +00:00
count++;
if (fn->arg2_type == ARG_PTR_TO_UNINIT_MEM)
bpf, verifier: add ARG_PTR_TO_RAW_STACK type When passing buffers from eBPF stack space into a helper function, we have ARG_PTR_TO_STACK argument type for helpers available. The verifier makes sure that such buffers are initialized, within boundaries, etc. However, the downside with this is that we have a couple of helper functions such as bpf_skb_load_bytes() that fill out the passed buffer in the expected success case anyway, so zero initializing them prior to the helper call is unneeded/wasted instructions in the eBPF program that can be avoided. Therefore, add a new helper function argument type called ARG_PTR_TO_RAW_STACK. The idea is to skip the STACK_MISC check in check_stack_boundary() and color the related stack slots as STACK_MISC after we checked all call arguments. Helper functions using ARG_PTR_TO_RAW_STACK must make sure that every path of the helper function will fill the provided buffer area, so that we cannot leak any uninitialized stack memory. This f.e. means that error paths need to memset() the buffers, but the expected fast-path doesn't have to do this anymore. Since there's no such helper needing more than at most one ARG_PTR_TO_RAW_STACK argument, we can keep it simple and don't need to check for multiple areas. Should in future such a use-case really appear, we have check_raw_mode() that will make sure we implement support for it first. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-12 22:10:51 +00:00
count++;
if (fn->arg3_type == ARG_PTR_TO_UNINIT_MEM)
bpf, verifier: add ARG_PTR_TO_RAW_STACK type When passing buffers from eBPF stack space into a helper function, we have ARG_PTR_TO_STACK argument type for helpers available. The verifier makes sure that such buffers are initialized, within boundaries, etc. However, the downside with this is that we have a couple of helper functions such as bpf_skb_load_bytes() that fill out the passed buffer in the expected success case anyway, so zero initializing them prior to the helper call is unneeded/wasted instructions in the eBPF program that can be avoided. Therefore, add a new helper function argument type called ARG_PTR_TO_RAW_STACK. The idea is to skip the STACK_MISC check in check_stack_boundary() and color the related stack slots as STACK_MISC after we checked all call arguments. Helper functions using ARG_PTR_TO_RAW_STACK must make sure that every path of the helper function will fill the provided buffer area, so that we cannot leak any uninitialized stack memory. This f.e. means that error paths need to memset() the buffers, but the expected fast-path doesn't have to do this anymore. Since there's no such helper needing more than at most one ARG_PTR_TO_RAW_STACK argument, we can keep it simple and don't need to check for multiple areas. Should in future such a use-case really appear, we have check_raw_mode() that will make sure we implement support for it first. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-12 22:10:51 +00:00
count++;
if (fn->arg4_type == ARG_PTR_TO_UNINIT_MEM)
bpf, verifier: add ARG_PTR_TO_RAW_STACK type When passing buffers from eBPF stack space into a helper function, we have ARG_PTR_TO_STACK argument type for helpers available. The verifier makes sure that such buffers are initialized, within boundaries, etc. However, the downside with this is that we have a couple of helper functions such as bpf_skb_load_bytes() that fill out the passed buffer in the expected success case anyway, so zero initializing them prior to the helper call is unneeded/wasted instructions in the eBPF program that can be avoided. Therefore, add a new helper function argument type called ARG_PTR_TO_RAW_STACK. The idea is to skip the STACK_MISC check in check_stack_boundary() and color the related stack slots as STACK_MISC after we checked all call arguments. Helper functions using ARG_PTR_TO_RAW_STACK must make sure that every path of the helper function will fill the provided buffer area, so that we cannot leak any uninitialized stack memory. This f.e. means that error paths need to memset() the buffers, but the expected fast-path doesn't have to do this anymore. Since there's no such helper needing more than at most one ARG_PTR_TO_RAW_STACK argument, we can keep it simple and don't need to check for multiple areas. Should in future such a use-case really appear, we have check_raw_mode() that will make sure we implement support for it first. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-12 22:10:51 +00:00
count++;
if (fn->arg5_type == ARG_PTR_TO_UNINIT_MEM)
bpf, verifier: add ARG_PTR_TO_RAW_STACK type When passing buffers from eBPF stack space into a helper function, we have ARG_PTR_TO_STACK argument type for helpers available. The verifier makes sure that such buffers are initialized, within boundaries, etc. However, the downside with this is that we have a couple of helper functions such as bpf_skb_load_bytes() that fill out the passed buffer in the expected success case anyway, so zero initializing them prior to the helper call is unneeded/wasted instructions in the eBPF program that can be avoided. Therefore, add a new helper function argument type called ARG_PTR_TO_RAW_STACK. The idea is to skip the STACK_MISC check in check_stack_boundary() and color the related stack slots as STACK_MISC after we checked all call arguments. Helper functions using ARG_PTR_TO_RAW_STACK must make sure that every path of the helper function will fill the provided buffer area, so that we cannot leak any uninitialized stack memory. This f.e. means that error paths need to memset() the buffers, but the expected fast-path doesn't have to do this anymore. Since there's no such helper needing more than at most one ARG_PTR_TO_RAW_STACK argument, we can keep it simple and don't need to check for multiple areas. Should in future such a use-case really appear, we have check_raw_mode() that will make sure we implement support for it first. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-12 22:10:51 +00:00
count++;
return count > 1 ? -EINVAL : 0;
}
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
/* Packet data might have moved, any old PTR_TO_PACKET[_META,_END]
* are now invalid, so turn them into unknown SCALAR_VALUE.
*/
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
static void __clear_all_pkt_pointers(struct bpf_verifier_env *env,
struct bpf_func_state *state)
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
{
struct bpf_reg_state *regs = state->regs, *reg;
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
int i;
for (i = 0; i < MAX_BPF_REG; i++)
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
if (reg_is_pkt_pointer_any(&regs[i]))
mark_reg_unknown(env, regs, i);
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
for (i = 0; i < state->allocated_stack / BPF_REG_SIZE; i++) {
if (state->stack[i].slot_type[0] != STACK_SPILL)
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
continue;
reg = &state->stack[i].spilled_ptr;
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
if (reg_is_pkt_pointer_any(reg))
__mark_reg_unknown(reg);
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
}
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
static void clear_all_pkt_pointers(struct bpf_verifier_env *env)
{
struct bpf_verifier_state *vstate = env->cur_state;
int i;
for (i = 0; i <= vstate->curframe; i++)
__clear_all_pkt_pointers(env, vstate->frame[i]);
}
static int check_func_call(struct bpf_verifier_env *env, struct bpf_insn *insn,
int *insn_idx)
{
struct bpf_verifier_state *state = env->cur_state;
struct bpf_func_state *caller, *callee;
int i, subprog, target_insn;
if (state->curframe + 1 >= MAX_CALL_FRAMES) {
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
verbose(env, "the call stack of %d frames is too deep\n",
state->curframe + 2);
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
return -E2BIG;
}
target_insn = *insn_idx + insn->imm;
subprog = find_subprog(env, target_insn + 1);
if (subprog < 0) {
verbose(env, "verifier bug. No program starts at insn %d\n",
target_insn + 1);
return -EFAULT;
}
caller = state->frame[state->curframe];
if (state->frame[state->curframe + 1]) {
verbose(env, "verifier bug. Frame %d already allocated\n",
state->curframe + 1);
return -EFAULT;
}
callee = kzalloc(sizeof(*callee), GFP_KERNEL);
if (!callee)
return -ENOMEM;
state->frame[state->curframe + 1] = callee;
/* callee cannot access r0, r6 - r9 for reading and has to write
* into its own stack before reading from it.
* callee can read/write into caller's stack
*/
init_func_state(env, callee,
/* remember the callsite, it will be used by bpf_exit */
*insn_idx /* callsite */,
state->curframe + 1 /* frameno within this callchain */,
subprog + 1 /* subprog number within this prog */);
/* copy r1 - r5 args that callee can access */
for (i = BPF_REG_1; i <= BPF_REG_5; i++)
callee->regs[i] = caller->regs[i];
/* after the call regsiters r0 - r5 were scratched */
for (i = 0; i < CALLER_SAVED_REGS; i++) {
mark_reg_not_init(env, caller->regs, caller_saved[i]);
check_reg_arg(env, caller_saved[i], DST_OP_NO_MARK);
}
/* only increment it after check_reg_arg() finished */
state->curframe++;
/* and go analyze first insn of the callee */
*insn_idx = target_insn;
if (env->log.level) {
verbose(env, "caller:\n");
print_verifier_state(env, caller);
verbose(env, "callee:\n");
print_verifier_state(env, callee);
}
return 0;
}
static int prepare_func_exit(struct bpf_verifier_env *env, int *insn_idx)
{
struct bpf_verifier_state *state = env->cur_state;
struct bpf_func_state *caller, *callee;
struct bpf_reg_state *r0;
callee = state->frame[state->curframe];
r0 = &callee->regs[BPF_REG_0];
if (r0->type == PTR_TO_STACK) {
/* technically it's ok to return caller's stack pointer
* (or caller's caller's pointer) back to the caller,
* since these pointers are valid. Only current stack
* pointer will be invalid as soon as function exits,
* but let's be conservative
*/
verbose(env, "cannot return stack pointer to the caller\n");
return -EINVAL;
}
state->curframe--;
caller = state->frame[state->curframe];
/* return to the caller whatever r0 had in the callee */
caller->regs[BPF_REG_0] = *r0;
*insn_idx = callee->callsite + 1;
if (env->log.level) {
verbose(env, "returning from callee:\n");
print_verifier_state(env, callee);
verbose(env, "to caller at %d:\n", *insn_idx);
print_verifier_state(env, caller);
}
/* clear everything in the callee */
free_func_state(callee);
state->frame[state->curframe + 1] = NULL;
return 0;
}
static int check_helper_call(struct bpf_verifier_env *env, int func_id, int insn_idx)
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
{
const struct bpf_func_proto *fn = NULL;
struct bpf_reg_state *regs;
struct bpf_call_arg_meta meta;
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
bool changes_data;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
int i, err;
/* find function prototype */
if (func_id < 0 || func_id >= __BPF_FUNC_MAX_ID) {
verbose(env, "invalid func %s#%d\n", func_id_name(func_id),
func_id);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
if (env->ops->get_func_proto)
fn = env->ops->get_func_proto(func_id);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (!fn) {
verbose(env, "unknown func %s#%d\n", func_id_name(func_id),
func_id);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
/* eBPF programs must be GPL compatible to use GPL-ed functions */
if (!env->prog->gpl_compatible && fn->gpl_only) {
verbose(env, "cannot call GPL only function from proprietary program\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
/* With LD_ABS/IND some JITs save/restore skb from r1. */
changes_data = bpf_helper_changes_pkt_data(fn->func);
if (changes_data && fn->arg1_type != ARG_PTR_TO_CTX) {
verbose(env, "kernel subsystem misconfigured func %s#%d: r1 != ctx\n",
func_id_name(func_id), func_id);
return -EINVAL;
}
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
memset(&meta, 0, sizeof(meta));
bpf: direct packet write and access for helpers for clsact progs This work implements direct packet access for helpers and direct packet write in a similar fashion as already available for XDP types via commits 4acf6c0b84c9 ("bpf: enable direct packet data write for xdp progs") and 6841de8b0d03 ("bpf: allow helpers access the packet directly"), and as a complementary feature to the already available direct packet read for tc (cls/act) programs. For enabling this, we need to introduce two helpers, bpf_skb_pull_data() and bpf_csum_update(). The first is generally needed for both, read and write, because they would otherwise only be limited to the current linear skb head. Usually, when the data_end test fails, programs just bail out, or, in the direct read case, use bpf_skb_load_bytes() as an alternative to overcome this limitation. If such data sits in non-linear parts, we can just pull them in once with the new helper, retest and eventually access them. At the same time, this also makes sure the skb is uncloned, which is, of course, a necessary condition for direct write. As this needs to be an invariant for the write part only, the verifier detects writes and adds a prologue that is calling bpf_skb_pull_data() to effectively unclone the skb from the very beginning in case it is indeed cloned. The heuristic makes use of a similar trick that was done in 233577a22089 ("net: filter: constify detection of pkt_type_offset"). This comes at zero cost for other programs that do not use the direct write feature. Should a program use this feature only sparsely and has read access for the most parts with, for example, drop return codes, then such write action can be delegated to a tail called program for mitigating this cost of potential uncloning to a late point in time where it would have been paid similarly with the bpf_skb_store_bytes() as well. Advantage of direct write is that the writes are inlined whereas the helper cannot make any length assumptions and thus needs to generate a call to memcpy() also for small sizes, as well as cost of helper call itself with sanity checks are avoided. Plus, when direct read is already used, we don't need to cache or perform rechecks on the data boundaries (due to verifier invalidating previous checks for helpers that change skb->data), so more complex programs using rewrites can benefit from switching to direct read plus write. For direct packet access to helpers, we save the otherwise needed copy into a temp struct sitting on stack memory when use-case allows. Both facilities are enabled via may_access_direct_pkt_data() in verifier. For now, we limit this to map helpers and csum_diff, and can successively enable other helpers where we find it makes sense. Helpers that definitely cannot be allowed for this are those part of bpf_helper_changes_skb_data() since they can change underlying data, and those that write into memory as this could happen for packet typed args when still cloned. bpf_csum_update() helper accommodates for the fact that we need to fixup checksum_complete when using direct write instead of bpf_skb_store_bytes(), meaning the programs can use available helpers like bpf_csum_diff(), and implement csum_add(), csum_sub(), csum_block_add(), csum_block_sub() equivalents in eBPF together with the new helper. A usage example will be provided for iproute2's examples/bpf/ directory. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 22:26:13 +00:00
meta.pkt_access = fn->pkt_access;
bpf, verifier: add ARG_PTR_TO_RAW_STACK type When passing buffers from eBPF stack space into a helper function, we have ARG_PTR_TO_STACK argument type for helpers available. The verifier makes sure that such buffers are initialized, within boundaries, etc. However, the downside with this is that we have a couple of helper functions such as bpf_skb_load_bytes() that fill out the passed buffer in the expected success case anyway, so zero initializing them prior to the helper call is unneeded/wasted instructions in the eBPF program that can be avoided. Therefore, add a new helper function argument type called ARG_PTR_TO_RAW_STACK. The idea is to skip the STACK_MISC check in check_stack_boundary() and color the related stack slots as STACK_MISC after we checked all call arguments. Helper functions using ARG_PTR_TO_RAW_STACK must make sure that every path of the helper function will fill the provided buffer area, so that we cannot leak any uninitialized stack memory. This f.e. means that error paths need to memset() the buffers, but the expected fast-path doesn't have to do this anymore. Since there's no such helper needing more than at most one ARG_PTR_TO_RAW_STACK argument, we can keep it simple and don't need to check for multiple areas. Should in future such a use-case really appear, we have check_raw_mode() that will make sure we implement support for it first. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-12 22:10:51 +00:00
/* We only support one arg being in raw mode at the moment, which
* is sufficient for the helper functions we have right now.
*/
err = check_raw_mode(fn);
if (err) {
verbose(env, "kernel subsystem misconfigured func %s#%d\n",
func_id_name(func_id), func_id);
bpf, verifier: add ARG_PTR_TO_RAW_STACK type When passing buffers from eBPF stack space into a helper function, we have ARG_PTR_TO_STACK argument type for helpers available. The verifier makes sure that such buffers are initialized, within boundaries, etc. However, the downside with this is that we have a couple of helper functions such as bpf_skb_load_bytes() that fill out the passed buffer in the expected success case anyway, so zero initializing them prior to the helper call is unneeded/wasted instructions in the eBPF program that can be avoided. Therefore, add a new helper function argument type called ARG_PTR_TO_RAW_STACK. The idea is to skip the STACK_MISC check in check_stack_boundary() and color the related stack slots as STACK_MISC after we checked all call arguments. Helper functions using ARG_PTR_TO_RAW_STACK must make sure that every path of the helper function will fill the provided buffer area, so that we cannot leak any uninitialized stack memory. This f.e. means that error paths need to memset() the buffers, but the expected fast-path doesn't have to do this anymore. Since there's no such helper needing more than at most one ARG_PTR_TO_RAW_STACK argument, we can keep it simple and don't need to check for multiple areas. Should in future such a use-case really appear, we have check_raw_mode() that will make sure we implement support for it first. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-12 22:10:51 +00:00
return err;
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* check args */
err = check_func_arg(env, BPF_REG_1, fn->arg1_type, &meta);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
err = check_func_arg(env, BPF_REG_2, fn->arg2_type, &meta);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
bpf: prevent out-of-bounds speculation Under speculation, CPUs may mis-predict branches in bounds checks. Thus, memory accesses under a bounds check may be speculated even if the bounds check fails, providing a primitive for building a side channel. To avoid leaking kernel data round up array-based maps and mask the index after bounds check, so speculated load with out of bounds index will load either valid value from the array or zero from the padded area. Unconditionally mask index for all array types even when max_entries are not rounded to power of 2 for root user. When map is created by unpriv user generate a sequence of bpf insns that includes AND operation to make sure that JITed code includes the same 'index & index_mask' operation. If prog_array map is created by unpriv user replace bpf_tail_call(ctx, map, index); with if (index >= max_entries) { index &= map->index_mask; bpf_tail_call(ctx, map, index); } (along with roundup to power 2) to prevent out-of-bounds speculation. There is secondary redundant 'if (index >= max_entries)' in the interpreter and in all JITs, but they can be optimized later if necessary. Other array-like maps (cpumap, devmap, sockmap, perf_event_array, cgroup_array) cannot be used by unpriv, so no changes there. That fixes bpf side of "Variant 1: bounds check bypass (CVE-2017-5753)" on all architectures with and without JIT. v2->v3: Daniel noticed that attack potentially can be crafted via syscall commands without loading the program, so add masking to those paths as well. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-08 01:33:02 +00:00
if (func_id == BPF_FUNC_tail_call) {
if (meta.map_ptr == NULL) {
verbose(env, "verifier bug\n");
return -EINVAL;
}
env->insn_aux_data[insn_idx].map_ptr = meta.map_ptr;
}
err = check_func_arg(env, BPF_REG_3, fn->arg3_type, &meta);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
err = check_func_arg(env, BPF_REG_4, fn->arg4_type, &meta);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
err = check_func_arg(env, BPF_REG_5, fn->arg5_type, &meta);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
bpf, verifier: add ARG_PTR_TO_RAW_STACK type When passing buffers from eBPF stack space into a helper function, we have ARG_PTR_TO_STACK argument type for helpers available. The verifier makes sure that such buffers are initialized, within boundaries, etc. However, the downside with this is that we have a couple of helper functions such as bpf_skb_load_bytes() that fill out the passed buffer in the expected success case anyway, so zero initializing them prior to the helper call is unneeded/wasted instructions in the eBPF program that can be avoided. Therefore, add a new helper function argument type called ARG_PTR_TO_RAW_STACK. The idea is to skip the STACK_MISC check in check_stack_boundary() and color the related stack slots as STACK_MISC after we checked all call arguments. Helper functions using ARG_PTR_TO_RAW_STACK must make sure that every path of the helper function will fill the provided buffer area, so that we cannot leak any uninitialized stack memory. This f.e. means that error paths need to memset() the buffers, but the expected fast-path doesn't have to do this anymore. Since there's no such helper needing more than at most one ARG_PTR_TO_RAW_STACK argument, we can keep it simple and don't need to check for multiple areas. Should in future such a use-case really appear, we have check_raw_mode() that will make sure we implement support for it first. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-12 22:10:51 +00:00
/* Mark slots with STACK_MISC in case of raw mode, stack offset
* is inferred from register state.
*/
for (i = 0; i < meta.access_size; i++) {
err = check_mem_access(env, insn_idx, meta.regno, i, BPF_B, BPF_WRITE, -1);
bpf, verifier: add ARG_PTR_TO_RAW_STACK type When passing buffers from eBPF stack space into a helper function, we have ARG_PTR_TO_STACK argument type for helpers available. The verifier makes sure that such buffers are initialized, within boundaries, etc. However, the downside with this is that we have a couple of helper functions such as bpf_skb_load_bytes() that fill out the passed buffer in the expected success case anyway, so zero initializing them prior to the helper call is unneeded/wasted instructions in the eBPF program that can be avoided. Therefore, add a new helper function argument type called ARG_PTR_TO_RAW_STACK. The idea is to skip the STACK_MISC check in check_stack_boundary() and color the related stack slots as STACK_MISC after we checked all call arguments. Helper functions using ARG_PTR_TO_RAW_STACK must make sure that every path of the helper function will fill the provided buffer area, so that we cannot leak any uninitialized stack memory. This f.e. means that error paths need to memset() the buffers, but the expected fast-path doesn't have to do this anymore. Since there's no such helper needing more than at most one ARG_PTR_TO_RAW_STACK argument, we can keep it simple and don't need to check for multiple areas. Should in future such a use-case really appear, we have check_raw_mode() that will make sure we implement support for it first. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-12 22:10:51 +00:00
if (err)
return err;
}
regs = cur_regs(env);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* reset caller saved regs */
for (i = 0; i < CALLER_SAVED_REGS; i++) {
mark_reg_not_init(env, regs, caller_saved[i]);
check_reg_arg(env, caller_saved[i], DST_OP_NO_MARK);
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* update return register (already marked as written above) */
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (fn->ret_type == RET_INTEGER) {
/* sets type to SCALAR_VALUE */
mark_reg_unknown(env, regs, BPF_REG_0);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
} else if (fn->ret_type == RET_VOID) {
regs[BPF_REG_0].type = NOT_INIT;
} else if (fn->ret_type == RET_PTR_TO_MAP_VALUE_OR_NULL) {
struct bpf_insn_aux_data *insn_aux;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
regs[BPF_REG_0].type = PTR_TO_MAP_VALUE_OR_NULL;
/* There is no offset yet applied, variable or fixed */
mark_reg_known_zero(env, regs, BPF_REG_0);
regs[BPF_REG_0].off = 0;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* remember map_ptr, so that check_map_access()
* can check 'value_size' boundary of memory access
* to map element returned from bpf_map_lookup_elem()
*/
if (meta.map_ptr == NULL) {
verbose(env,
"kernel subsystem misconfigured verifier\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
regs[BPF_REG_0].map_ptr = meta.map_ptr;
regs[BPF_REG_0].id = ++env->id_gen;
insn_aux = &env->insn_aux_data[insn_idx];
if (!insn_aux->map_ptr)
insn_aux->map_ptr = meta.map_ptr;
else if (insn_aux->map_ptr != meta.map_ptr)
insn_aux->map_ptr = BPF_MAP_PTR_POISON;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
} else {
verbose(env, "unknown return type %d of func %s#%d\n",
fn->ret_type, func_id_name(func_id), func_id);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
bpf: allow bpf programs to tail-call other bpf programs introduce bpf_tail_call(ctx, &jmp_table, index) helper function which can be used from BPF programs like: int bpf_prog(struct pt_regs *ctx) { ... bpf_tail_call(ctx, &jmp_table, index); ... } that is roughly equivalent to: int bpf_prog(struct pt_regs *ctx) { ... if (jmp_table[index]) return (*jmp_table[index])(ctx); ... } The important detail that it's not a normal call, but a tail call. The kernel stack is precious, so this helper reuses the current stack frame and jumps into another BPF program without adding extra call frame. It's trivially done in interpreter and a bit trickier in JITs. In case of x64 JIT the bigger part of generated assembler prologue is common for all programs, so it is simply skipped while jumping. Other JITs can do similar prologue-skipping optimization or do stack unwind before jumping into the next program. bpf_tail_call() arguments: ctx - context pointer jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table index - index in the jump table Since all BPF programs are idenitified by file descriptor, user space need to populate the jmp_table with FDs of other BPF programs. If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere and program execution continues as normal. New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can populate this jmp_table array with FDs of other bpf programs. Programs can share the same jmp_table array or use multiple jmp_tables. The chain of tail calls can form unpredictable dynamic loops therefore tail_call_cnt is used to limit the number of calls and currently is set to 32. Use cases: Acked-by: Daniel Borkmann <daniel@iogearbox.net> ========== - simplify complex programs by splitting them into a sequence of small programs - dispatch routine For tracing and future seccomp the program may be triggered on all system calls, but processing of syscall arguments will be different. It's more efficient to implement them as: int syscall_entry(struct seccomp_data *ctx) { bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */); ... default: process unknown syscall ... } int sys_write_event(struct seccomp_data *ctx) {...} int sys_read_event(struct seccomp_data *ctx) {...} syscall_jmp_table[__NR_write] = sys_write_event; syscall_jmp_table[__NR_read] = sys_read_event; For networking the program may call into different parsers depending on packet format, like: int packet_parser(struct __sk_buff *skb) { ... parse L2, L3 here ... __u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol)); bpf_tail_call(skb, &ipproto_jmp_table, ipproto); ... default: process unknown protocol ... } int parse_tcp(struct __sk_buff *skb) {...} int parse_udp(struct __sk_buff *skb) {...} ipproto_jmp_table[IPPROTO_TCP] = parse_tcp; ipproto_jmp_table[IPPROTO_UDP] = parse_udp; - for TC use case, bpf_tail_call() allows to implement reclassify-like logic - bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table are atomic, so user space can build chains of BPF programs on the fly Implementation details: ======================= - high performance of bpf_tail_call() is the goal. It could have been implemented without JIT changes as a wrapper on top of BPF_PROG_RUN() macro, but with two downsides: . all programs would have to pay performance penalty for this feature and tail call itself would be slower, since mandatory stack unwind, return, stack allocate would be done for every tailcall. . tailcall would be limited to programs running preempt_disabled, since generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would need to be either global per_cpu variable accessed by helper and by wrapper or global variable protected by locks. In this implementation x64 JIT bypasses stack unwind and jumps into the callee program after prologue. - bpf_prog_array_compatible() ensures that prog_type of callee and caller are the same and JITed/non-JITed flag is the same, since calling JITed program from non-JITed is invalid, since stack frames are different. Similarly calling kprobe type program from socket type program is invalid. - jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map' abstraction, its user space API and all of verifier logic. It's in the existing arraymap.c file, since several functions are shared with regular array map. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-19 23:59:03 +00:00
err = check_map_func_compatibility(env, meta.map_ptr, func_id);
if (err)
return err;
bpf: allow bpf programs to tail-call other bpf programs introduce bpf_tail_call(ctx, &jmp_table, index) helper function which can be used from BPF programs like: int bpf_prog(struct pt_regs *ctx) { ... bpf_tail_call(ctx, &jmp_table, index); ... } that is roughly equivalent to: int bpf_prog(struct pt_regs *ctx) { ... if (jmp_table[index]) return (*jmp_table[index])(ctx); ... } The important detail that it's not a normal call, but a tail call. The kernel stack is precious, so this helper reuses the current stack frame and jumps into another BPF program without adding extra call frame. It's trivially done in interpreter and a bit trickier in JITs. In case of x64 JIT the bigger part of generated assembler prologue is common for all programs, so it is simply skipped while jumping. Other JITs can do similar prologue-skipping optimization or do stack unwind before jumping into the next program. bpf_tail_call() arguments: ctx - context pointer jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table index - index in the jump table Since all BPF programs are idenitified by file descriptor, user space need to populate the jmp_table with FDs of other BPF programs. If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere and program execution continues as normal. New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can populate this jmp_table array with FDs of other bpf programs. Programs can share the same jmp_table array or use multiple jmp_tables. The chain of tail calls can form unpredictable dynamic loops therefore tail_call_cnt is used to limit the number of calls and currently is set to 32. Use cases: Acked-by: Daniel Borkmann <daniel@iogearbox.net> ========== - simplify complex programs by splitting them into a sequence of small programs - dispatch routine For tracing and future seccomp the program may be triggered on all system calls, but processing of syscall arguments will be different. It's more efficient to implement them as: int syscall_entry(struct seccomp_data *ctx) { bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */); ... default: process unknown syscall ... } int sys_write_event(struct seccomp_data *ctx) {...} int sys_read_event(struct seccomp_data *ctx) {...} syscall_jmp_table[__NR_write] = sys_write_event; syscall_jmp_table[__NR_read] = sys_read_event; For networking the program may call into different parsers depending on packet format, like: int packet_parser(struct __sk_buff *skb) { ... parse L2, L3 here ... __u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol)); bpf_tail_call(skb, &ipproto_jmp_table, ipproto); ... default: process unknown protocol ... } int parse_tcp(struct __sk_buff *skb) {...} int parse_udp(struct __sk_buff *skb) {...} ipproto_jmp_table[IPPROTO_TCP] = parse_tcp; ipproto_jmp_table[IPPROTO_UDP] = parse_udp; - for TC use case, bpf_tail_call() allows to implement reclassify-like logic - bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table are atomic, so user space can build chains of BPF programs on the fly Implementation details: ======================= - high performance of bpf_tail_call() is the goal. It could have been implemented without JIT changes as a wrapper on top of BPF_PROG_RUN() macro, but with two downsides: . all programs would have to pay performance penalty for this feature and tail call itself would be slower, since mandatory stack unwind, return, stack allocate would be done for every tailcall. . tailcall would be limited to programs running preempt_disabled, since generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would need to be either global per_cpu variable accessed by helper and by wrapper or global variable protected by locks. In this implementation x64 JIT bypasses stack unwind and jumps into the callee program after prologue. - bpf_prog_array_compatible() ensures that prog_type of callee and caller are the same and JITed/non-JITed flag is the same, since calling JITed program from non-JITed is invalid, since stack frames are different. Similarly calling kprobe type program from socket type program is invalid. - jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map' abstraction, its user space API and all of verifier logic. It's in the existing arraymap.c file, since several functions are shared with regular array map. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-19 23:59:03 +00:00
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
if (changes_data)
clear_all_pkt_pointers(env);
return 0;
}
static bool signed_add_overflows(s64 a, s64 b)
{
/* Do the add in u64, where overflow is well-defined */
s64 res = (s64)((u64)a + (u64)b);
if (b < 0)
return res > a;
return res < a;
}
static bool signed_sub_overflows(s64 a, s64 b)
{
/* Do the sub in u64, where overflow is well-defined */
s64 res = (s64)((u64)a - (u64)b);
if (b < 0)
return res < a;
return res > a;
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
}
static bool check_reg_sane_offset(struct bpf_verifier_env *env,
const struct bpf_reg_state *reg,
enum bpf_reg_type type)
{
bool known = tnum_is_const(reg->var_off);
s64 val = reg->var_off.value;
s64 smin = reg->smin_value;
if (known && (val >= BPF_MAX_VAR_OFF || val <= -BPF_MAX_VAR_OFF)) {
verbose(env, "math between %s pointer and %lld is not allowed\n",
reg_type_str[type], val);
return false;
}
if (reg->off >= BPF_MAX_VAR_OFF || reg->off <= -BPF_MAX_VAR_OFF) {
verbose(env, "%s pointer offset %d is not allowed\n",
reg_type_str[type], reg->off);
return false;
}
if (smin == S64_MIN) {
verbose(env, "math between %s pointer and register with unbounded min value is not allowed\n",
reg_type_str[type]);
return false;
}
if (smin >= BPF_MAX_VAR_OFF || smin <= -BPF_MAX_VAR_OFF) {
verbose(env, "value %lld makes %s pointer be out of bounds\n",
smin, reg_type_str[type]);
return false;
}
return true;
}
/* Handles arithmetic on a pointer and a scalar: computes new min/max and var_off.
* Caller should also handle BPF_MOV case separately.
* If we return -EACCES, caller may want to try again treating pointer as a
* scalar. So we only emit a diagnostic if !env->allow_ptr_leaks.
*/
static int adjust_ptr_min_max_vals(struct bpf_verifier_env *env,
struct bpf_insn *insn,
const struct bpf_reg_state *ptr_reg,
const struct bpf_reg_state *off_reg)
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
{
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
struct bpf_verifier_state *vstate = env->cur_state;
struct bpf_func_state *state = vstate->frame[vstate->curframe];
struct bpf_reg_state *regs = state->regs, *dst_reg;
bool known = tnum_is_const(off_reg->var_off);
s64 smin_val = off_reg->smin_value, smax_val = off_reg->smax_value,
smin_ptr = ptr_reg->smin_value, smax_ptr = ptr_reg->smax_value;
u64 umin_val = off_reg->umin_value, umax_val = off_reg->umax_value,
umin_ptr = ptr_reg->umin_value, umax_ptr = ptr_reg->umax_value;
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
u8 opcode = BPF_OP(insn->code);
u32 dst = insn->dst_reg;
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
dst_reg = &regs[dst];
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
if (WARN_ON_ONCE(known && (smin_val != smax_val))) {
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
print_verifier_state(env, state);
verbose(env,
"verifier internal error: known but bad sbounds\n");
return -EINVAL;
}
if (WARN_ON_ONCE(known && (umin_val != umax_val))) {
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
print_verifier_state(env, state);
verbose(env,
"verifier internal error: known but bad ubounds\n");
return -EINVAL;
}
if (BPF_CLASS(insn->code) != BPF_ALU64) {
/* 32-bit ALU ops on pointers produce (meaningless) scalars */
verbose(env,
"R%d 32-bit pointer arithmetic prohibited\n",
dst);
return -EACCES;
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
}
if (ptr_reg->type == PTR_TO_MAP_VALUE_OR_NULL) {
verbose(env, "R%d pointer arithmetic on PTR_TO_MAP_VALUE_OR_NULL prohibited, null-check it first\n",
dst);
return -EACCES;
}
if (ptr_reg->type == CONST_PTR_TO_MAP) {
verbose(env, "R%d pointer arithmetic on CONST_PTR_TO_MAP prohibited\n",
dst);
return -EACCES;
}
if (ptr_reg->type == PTR_TO_PACKET_END) {
verbose(env, "R%d pointer arithmetic on PTR_TO_PACKET_END prohibited\n",
dst);
return -EACCES;
}
/* In case of 'scalar += pointer', dst_reg inherits pointer type and id.
* The id may be overwritten later if we create a new variable offset.
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
*/
dst_reg->type = ptr_reg->type;
dst_reg->id = ptr_reg->id;
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
if (!check_reg_sane_offset(env, off_reg, ptr_reg->type) ||
!check_reg_sane_offset(env, ptr_reg, ptr_reg->type))
return -EINVAL;
switch (opcode) {
case BPF_ADD:
/* We can take a fixed offset as long as it doesn't overflow
* the s32 'off' field
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
*/
if (known && (ptr_reg->off + smin_val ==
(s64)(s32)(ptr_reg->off + smin_val))) {
/* pointer += K. Accumulate it into fixed offset */
dst_reg->smin_value = smin_ptr;
dst_reg->smax_value = smax_ptr;
dst_reg->umin_value = umin_ptr;
dst_reg->umax_value = umax_ptr;
dst_reg->var_off = ptr_reg->var_off;
dst_reg->off = ptr_reg->off + smin_val;
dst_reg->range = ptr_reg->range;
break;
}
/* A new variable offset is created. Note that off_reg->off
* == 0, since it's a scalar.
* dst_reg gets the pointer type and since some positive
* integer value was added to the pointer, give it a new 'id'
* if it's a PTR_TO_PACKET.
* this creates a new 'base' pointer, off_reg (variable) gets
* added into the variable offset, and we copy the fixed offset
* from ptr_reg.
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
*/
if (signed_add_overflows(smin_ptr, smin_val) ||
signed_add_overflows(smax_ptr, smax_val)) {
dst_reg->smin_value = S64_MIN;
dst_reg->smax_value = S64_MAX;
} else {
dst_reg->smin_value = smin_ptr + smin_val;
dst_reg->smax_value = smax_ptr + smax_val;
}
if (umin_ptr + umin_val < umin_ptr ||
umax_ptr + umax_val < umax_ptr) {
dst_reg->umin_value = 0;
dst_reg->umax_value = U64_MAX;
} else {
dst_reg->umin_value = umin_ptr + umin_val;
dst_reg->umax_value = umax_ptr + umax_val;
}
dst_reg->var_off = tnum_add(ptr_reg->var_off, off_reg->var_off);
dst_reg->off = ptr_reg->off;
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
if (reg_is_pkt_pointer(ptr_reg)) {
dst_reg->id = ++env->id_gen;
/* something was added to pkt_ptr, set range to zero */
dst_reg->range = 0;
}
break;
case BPF_SUB:
if (dst_reg == off_reg) {
/* scalar -= pointer. Creates an unknown scalar */
verbose(env, "R%d tried to subtract pointer from scalar\n",
dst);
return -EACCES;
}
/* We don't allow subtraction from FP, because (according to
* test_verifier.c test "invalid fp arithmetic", JITs might not
* be able to deal with it.
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
*/
if (ptr_reg->type == PTR_TO_STACK) {
verbose(env, "R%d subtraction from stack pointer prohibited\n",
dst);
return -EACCES;
}
if (known && (ptr_reg->off - smin_val ==
(s64)(s32)(ptr_reg->off - smin_val))) {
/* pointer -= K. Subtract it from fixed offset */
dst_reg->smin_value = smin_ptr;
dst_reg->smax_value = smax_ptr;
dst_reg->umin_value = umin_ptr;
dst_reg->umax_value = umax_ptr;
dst_reg->var_off = ptr_reg->var_off;
dst_reg->id = ptr_reg->id;
dst_reg->off = ptr_reg->off - smin_val;
dst_reg->range = ptr_reg->range;
break;
}
/* A new variable offset is created. If the subtrahend is known
* nonnegative, then any reg->range we had before is still good.
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
*/
if (signed_sub_overflows(smin_ptr, smax_val) ||
signed_sub_overflows(smax_ptr, smin_val)) {
/* Overflow possible, we know nothing */
dst_reg->smin_value = S64_MIN;
dst_reg->smax_value = S64_MAX;
} else {
dst_reg->smin_value = smin_ptr - smax_val;
dst_reg->smax_value = smax_ptr - smin_val;
}
if (umin_ptr < umax_val) {
/* Overflow possible, we know nothing */
dst_reg->umin_value = 0;
dst_reg->umax_value = U64_MAX;
} else {
/* Cannot overflow (as long as bounds are consistent) */
dst_reg->umin_value = umin_ptr - umax_val;
dst_reg->umax_value = umax_ptr - umin_val;
}
dst_reg->var_off = tnum_sub(ptr_reg->var_off, off_reg->var_off);
dst_reg->off = ptr_reg->off;
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
if (reg_is_pkt_pointer(ptr_reg)) {
dst_reg->id = ++env->id_gen;
/* something was added to pkt_ptr, set range to zero */
if (smin_val < 0)
dst_reg->range = 0;
}
break;
case BPF_AND:
case BPF_OR:
case BPF_XOR:
/* bitwise ops on pointers are troublesome, prohibit. */
verbose(env, "R%d bitwise operator %s on pointer prohibited\n",
dst, bpf_alu_string[opcode >> 4]);
return -EACCES;
default:
/* other operators (e.g. MUL,LSH) produce non-pointer results */
verbose(env, "R%d pointer arithmetic with %s operator prohibited\n",
dst, bpf_alu_string[opcode >> 4]);
return -EACCES;
}
if (!check_reg_sane_offset(env, dst_reg, ptr_reg->type))
return -EINVAL;
__update_reg_bounds(dst_reg);
__reg_deduce_bounds(dst_reg);
__reg_bound_offset(dst_reg);
return 0;
}
/* WARNING: This function does calculations on 64-bit values, but the actual
* execution may occur on 32-bit values. Therefore, things like bitshifts
* need extra checks in the 32-bit case.
*/
static int adjust_scalar_min_max_vals(struct bpf_verifier_env *env,
struct bpf_insn *insn,
struct bpf_reg_state *dst_reg,
struct bpf_reg_state src_reg)
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
{
struct bpf_reg_state *regs = cur_regs(env);
u8 opcode = BPF_OP(insn->code);
bool src_known, dst_known;
s64 smin_val, smax_val;
u64 umin_val, umax_val;
u64 insn_bitness = (BPF_CLASS(insn->code) == BPF_ALU64) ? 64 : 32;
smin_val = src_reg.smin_value;
smax_val = src_reg.smax_value;
umin_val = src_reg.umin_value;
umax_val = src_reg.umax_value;
src_known = tnum_is_const(src_reg.var_off);
dst_known = tnum_is_const(dst_reg->var_off);
if (!src_known &&
opcode != BPF_ADD && opcode != BPF_SUB && opcode != BPF_AND) {
__mark_reg_unknown(dst_reg);
return 0;
}
switch (opcode) {
case BPF_ADD:
if (signed_add_overflows(dst_reg->smin_value, smin_val) ||
signed_add_overflows(dst_reg->smax_value, smax_val)) {
dst_reg->smin_value = S64_MIN;
dst_reg->smax_value = S64_MAX;
} else {
dst_reg->smin_value += smin_val;
dst_reg->smax_value += smax_val;
}
if (dst_reg->umin_value + umin_val < umin_val ||
dst_reg->umax_value + umax_val < umax_val) {
dst_reg->umin_value = 0;
dst_reg->umax_value = U64_MAX;
} else {
dst_reg->umin_value += umin_val;
dst_reg->umax_value += umax_val;
}
dst_reg->var_off = tnum_add(dst_reg->var_off, src_reg.var_off);
break;
case BPF_SUB:
if (signed_sub_overflows(dst_reg->smin_value, smax_val) ||
signed_sub_overflows(dst_reg->smax_value, smin_val)) {
/* Overflow possible, we know nothing */
dst_reg->smin_value = S64_MIN;
dst_reg->smax_value = S64_MAX;
} else {
dst_reg->smin_value -= smax_val;
dst_reg->smax_value -= smin_val;
}
if (dst_reg->umin_value < umax_val) {
/* Overflow possible, we know nothing */
dst_reg->umin_value = 0;
dst_reg->umax_value = U64_MAX;
} else {
/* Cannot overflow (as long as bounds are consistent) */
dst_reg->umin_value -= umax_val;
dst_reg->umax_value -= umin_val;
}
dst_reg->var_off = tnum_sub(dst_reg->var_off, src_reg.var_off);
break;
case BPF_MUL:
dst_reg->var_off = tnum_mul(dst_reg->var_off, src_reg.var_off);
if (smin_val < 0 || dst_reg->smin_value < 0) {
/* Ain't nobody got time to multiply that sign */
__mark_reg_unbounded(dst_reg);
__update_reg_bounds(dst_reg);
break;
}
/* Both values are positive, so we can work with unsigned and
* copy the result to signed (unless it exceeds S64_MAX).
*/
if (umax_val > U32_MAX || dst_reg->umax_value > U32_MAX) {
/* Potential overflow, we know nothing */
__mark_reg_unbounded(dst_reg);
/* (except what we can learn from the var_off) */
__update_reg_bounds(dst_reg);
break;
}
dst_reg->umin_value *= umin_val;
dst_reg->umax_value *= umax_val;
if (dst_reg->umax_value > S64_MAX) {
/* Overflow possible, we know nothing */
dst_reg->smin_value = S64_MIN;
dst_reg->smax_value = S64_MAX;
} else {
dst_reg->smin_value = dst_reg->umin_value;
dst_reg->smax_value = dst_reg->umax_value;
}
break;
case BPF_AND:
if (src_known && dst_known) {
__mark_reg_known(dst_reg, dst_reg->var_off.value &
src_reg.var_off.value);
break;
}
/* We get our minimum from the var_off, since that's inherently
* bitwise. Our maximum is the minimum of the operands' maxima.
*/
dst_reg->var_off = tnum_and(dst_reg->var_off, src_reg.var_off);
dst_reg->umin_value = dst_reg->var_off.value;
dst_reg->umax_value = min(dst_reg->umax_value, umax_val);
if (dst_reg->smin_value < 0 || smin_val < 0) {
/* Lose signed bounds when ANDing negative numbers,
* ain't nobody got time for that.
*/
dst_reg->smin_value = S64_MIN;
dst_reg->smax_value = S64_MAX;
} else {
/* ANDing two positives gives a positive, so safe to
* cast result into s64.
*/
dst_reg->smin_value = dst_reg->umin_value;
dst_reg->smax_value = dst_reg->umax_value;
}
/* We may learn something more from the var_off */
__update_reg_bounds(dst_reg);
break;
case BPF_OR:
if (src_known && dst_known) {
__mark_reg_known(dst_reg, dst_reg->var_off.value |
src_reg.var_off.value);
break;
}
/* We get our maximum from the var_off, and our minimum is the
* maximum of the operands' minima
*/
dst_reg->var_off = tnum_or(dst_reg->var_off, src_reg.var_off);
dst_reg->umin_value = max(dst_reg->umin_value, umin_val);
dst_reg->umax_value = dst_reg->var_off.value |
dst_reg->var_off.mask;
if (dst_reg->smin_value < 0 || smin_val < 0) {
/* Lose signed bounds when ORing negative numbers,
* ain't nobody got time for that.
*/
dst_reg->smin_value = S64_MIN;
dst_reg->smax_value = S64_MAX;
} else {
/* ORing two positives gives a positive, so safe to
* cast result into s64.
*/
dst_reg->smin_value = dst_reg->umin_value;
dst_reg->smax_value = dst_reg->umax_value;
}
/* We may learn something more from the var_off */
__update_reg_bounds(dst_reg);
break;
case BPF_LSH:
if (umax_val >= insn_bitness) {
/* Shifts greater than 31 or 63 are undefined.
* This includes shifts by a negative number.
*/
mark_reg_unknown(env, regs, insn->dst_reg);
break;
}
/* We lose all sign bit information (except what we can pick
* up from var_off)
*/
dst_reg->smin_value = S64_MIN;
dst_reg->smax_value = S64_MAX;
/* If we might shift our top bit out, then we know nothing */
if (dst_reg->umax_value > 1ULL << (63 - umax_val)) {
dst_reg->umin_value = 0;
dst_reg->umax_value = U64_MAX;
bpf: Track alignment of register values in the verifier. Currently if we add only constant values to pointers we can fully validate the alignment, and properly check if we need to reject the program on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures. However, once an unknown value is introduced we only allow byte sized memory accesses which is too restrictive. Add logic to track the known minimum alignment of register values, and propagate this state into registers containing pointers. The most common paradigm that makes use of this new logic is computing the transport header using the IP header length field. For example: struct ethhdr *ep = skb->data; struct iphdr *iph = (struct iphdr *) (ep + 1); struct tcphdr *th; ... n = iph->ihl; th = ((void *)iph + (n * 4)); port = th->dest; The existing code will reject the load of th->dest because it cannot validate that the alignment is at least 2 once "n * 4" is added the the packet pointer. In the new code, the register holding "n * 4" will have a reg->min_align value of 4, because any value multiplied by 4 will be at least 4 byte aligned. (actually, the eBPF code emitted by the compiler in this case is most likely to use a shift left by 2, but the end result is identical) At the critical addition: th = ((void *)iph + (n * 4)); The register holding 'th' will start with reg->off value of 14. The pointer addition will transform that reg into something that looks like: reg->aux_off = 14 reg->aux_off_align = 4 Next, the verifier will look at the th->dest load, and it will see a load offset of 2, and first check: if (reg->aux_off_align % size) which will pass because aux_off_align is 4. reg_off will be computed: reg_off = reg->off; ... reg_off += reg->aux_off; plus we have off==2, and it will thus check: if ((NET_IP_ALIGN + reg_off + off) % size != 0) which evaluates to: if ((NET_IP_ALIGN + 14 + 2) % size != 0) On strict alignment architectures, NET_IP_ALIGN is 2, thus: if ((2 + 14 + 2) % size != 0) which passes. These pointer transformations and checks work regardless of whether the constant offset or the variable with known alignment is added first to the pointer register. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2017-05-10 18:22:52 +00:00
} else {
dst_reg->umin_value <<= umin_val;
dst_reg->umax_value <<= umax_val;
bpf: Track alignment of register values in the verifier. Currently if we add only constant values to pointers we can fully validate the alignment, and properly check if we need to reject the program on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures. However, once an unknown value is introduced we only allow byte sized memory accesses which is too restrictive. Add logic to track the known minimum alignment of register values, and propagate this state into registers containing pointers. The most common paradigm that makes use of this new logic is computing the transport header using the IP header length field. For example: struct ethhdr *ep = skb->data; struct iphdr *iph = (struct iphdr *) (ep + 1); struct tcphdr *th; ... n = iph->ihl; th = ((void *)iph + (n * 4)); port = th->dest; The existing code will reject the load of th->dest because it cannot validate that the alignment is at least 2 once "n * 4" is added the the packet pointer. In the new code, the register holding "n * 4" will have a reg->min_align value of 4, because any value multiplied by 4 will be at least 4 byte aligned. (actually, the eBPF code emitted by the compiler in this case is most likely to use a shift left by 2, but the end result is identical) At the critical addition: th = ((void *)iph + (n * 4)); The register holding 'th' will start with reg->off value of 14. The pointer addition will transform that reg into something that looks like: reg->aux_off = 14 reg->aux_off_align = 4 Next, the verifier will look at the th->dest load, and it will see a load offset of 2, and first check: if (reg->aux_off_align % size) which will pass because aux_off_align is 4. reg_off will be computed: reg_off = reg->off; ... reg_off += reg->aux_off; plus we have off==2, and it will thus check: if ((NET_IP_ALIGN + reg_off + off) % size != 0) which evaluates to: if ((NET_IP_ALIGN + 14 + 2) % size != 0) On strict alignment architectures, NET_IP_ALIGN is 2, thus: if ((2 + 14 + 2) % size != 0) which passes. These pointer transformations and checks work regardless of whether the constant offset or the variable with known alignment is added first to the pointer register. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2017-05-10 18:22:52 +00:00
}
if (src_known)
dst_reg->var_off = tnum_lshift(dst_reg->var_off, umin_val);
else
dst_reg->var_off = tnum_lshift(tnum_unknown, umin_val);
/* We may learn something more from the var_off */
__update_reg_bounds(dst_reg);
break;
case BPF_RSH:
if (umax_val >= insn_bitness) {
/* Shifts greater than 31 or 63 are undefined.
* This includes shifts by a negative number.
*/
mark_reg_unknown(env, regs, insn->dst_reg);
break;
}
/* BPF_RSH is an unsigned shift. If the value in dst_reg might
* be negative, then either:
* 1) src_reg might be zero, so the sign bit of the result is
* unknown, so we lose our signed bounds
* 2) it's known negative, thus the unsigned bounds capture the
* signed bounds
* 3) the signed bounds cross zero, so they tell us nothing
* about the result
* If the value in dst_reg is known nonnegative, then again the
* unsigned bounts capture the signed bounds.
* Thus, in all cases it suffices to blow away our signed bounds
* and rely on inferring new ones from the unsigned bounds and
* var_off of the result.
*/
dst_reg->smin_value = S64_MIN;
dst_reg->smax_value = S64_MAX;
if (src_known)
dst_reg->var_off = tnum_rshift(dst_reg->var_off,
umin_val);
else
dst_reg->var_off = tnum_rshift(tnum_unknown, umin_val);
dst_reg->umin_value >>= umax_val;
dst_reg->umax_value >>= umin_val;
/* We may learn something more from the var_off */
__update_reg_bounds(dst_reg);
break;
default:
mark_reg_unknown(env, regs, insn->dst_reg);
break;
}
if (BPF_CLASS(insn->code) != BPF_ALU64) {
/* 32-bit ALU ops are (32,32)->32 */
coerce_reg_to_size(dst_reg, 4);
coerce_reg_to_size(&src_reg, 4);
}
__reg_deduce_bounds(dst_reg);
__reg_bound_offset(dst_reg);
return 0;
}
/* Handles ALU ops other than BPF_END, BPF_NEG and BPF_MOV: computes new min/max
* and var_off.
*/
static int adjust_reg_min_max_vals(struct bpf_verifier_env *env,
struct bpf_insn *insn)
{
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
struct bpf_verifier_state *vstate = env->cur_state;
struct bpf_func_state *state = vstate->frame[vstate->curframe];
struct bpf_reg_state *regs = state->regs, *dst_reg, *src_reg;
struct bpf_reg_state *ptr_reg = NULL, off_reg = {0};
u8 opcode = BPF_OP(insn->code);
dst_reg = &regs[insn->dst_reg];
src_reg = NULL;
if (dst_reg->type != SCALAR_VALUE)
ptr_reg = dst_reg;
if (BPF_SRC(insn->code) == BPF_X) {
src_reg = &regs[insn->src_reg];
if (src_reg->type != SCALAR_VALUE) {
if (dst_reg->type != SCALAR_VALUE) {
/* Combining two pointers by any ALU op yields
* an arbitrary scalar. Disallow all math except
* pointer subtraction
*/
if (opcode == BPF_SUB){
mark_reg_unknown(env, regs, insn->dst_reg);
return 0;
}
verbose(env, "R%d pointer %s pointer prohibited\n",
insn->dst_reg,
bpf_alu_string[opcode >> 4]);
return -EACCES;
} else {
/* scalar += pointer
* This is legal, but we have to reverse our
* src/dest handling in computing the range
*/
return adjust_ptr_min_max_vals(env, insn,
src_reg, dst_reg);
}
} else if (ptr_reg) {
/* pointer += scalar */
return adjust_ptr_min_max_vals(env, insn,
dst_reg, src_reg);
}
} else {
/* Pretend the src is a reg with a known value, since we only
* need to be able to read from this state.
*/
off_reg.type = SCALAR_VALUE;
__mark_reg_known(&off_reg, insn->imm);
src_reg = &off_reg;
if (ptr_reg) /* pointer += K */
return adjust_ptr_min_max_vals(env, insn,
ptr_reg, src_reg);
}
/* Got here implies adding two SCALAR_VALUEs */
if (WARN_ON_ONCE(ptr_reg)) {
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
print_verifier_state(env, state);
verbose(env, "verifier internal error: unexpected ptr_reg\n");
return -EINVAL;
}
if (WARN_ON(!src_reg)) {
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
print_verifier_state(env, state);
verbose(env, "verifier internal error: no src_reg\n");
return -EINVAL;
}
return adjust_scalar_min_max_vals(env, insn, dst_reg, *src_reg);
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* check validity of 32-bit and 64-bit arithmetic operations */
static int check_alu_op(struct bpf_verifier_env *env, struct bpf_insn *insn)
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
{
struct bpf_reg_state *regs = cur_regs(env);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
u8 opcode = BPF_OP(insn->code);
int err;
if (opcode == BPF_END || opcode == BPF_NEG) {
if (opcode == BPF_NEG) {
if (BPF_SRC(insn->code) != 0 ||
insn->src_reg != BPF_REG_0 ||
insn->off != 0 || insn->imm != 0) {
verbose(env, "BPF_NEG uses reserved fields\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
} else {
if (insn->src_reg != BPF_REG_0 || insn->off != 0 ||
(insn->imm != 16 && insn->imm != 32 && insn->imm != 64) ||
BPF_CLASS(insn->code) == BPF_ALU64) {
verbose(env, "BPF_END uses reserved fields\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
}
/* check src operand */
err = check_reg_arg(env, insn->dst_reg, SRC_OP);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
if (is_pointer_value(env, insn->dst_reg)) {
verbose(env, "R%d pointer arithmetic prohibited\n",
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
insn->dst_reg);
return -EACCES;
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* check dest operand */
err = check_reg_arg(env, insn->dst_reg, DST_OP);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
} else if (opcode == BPF_MOV) {
if (BPF_SRC(insn->code) == BPF_X) {
if (insn->imm != 0 || insn->off != 0) {
verbose(env, "BPF_MOV uses reserved fields\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
/* check src operand */
err = check_reg_arg(env, insn->src_reg, SRC_OP);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
} else {
if (insn->src_reg != BPF_REG_0 || insn->off != 0) {
verbose(env, "BPF_MOV uses reserved fields\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
}
/* check dest operand */
err = check_reg_arg(env, insn->dst_reg, DST_OP);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
if (BPF_SRC(insn->code) == BPF_X) {
if (BPF_CLASS(insn->code) == BPF_ALU64) {
/* case: R1 = R2
* copy register state to dest reg
*/
regs[insn->dst_reg] = regs[insn->src_reg];
regs[insn->dst_reg].live |= REG_LIVE_WRITTEN;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
} else {
/* R1 = (u32) R2 */
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
if (is_pointer_value(env, insn->src_reg)) {
verbose(env,
"R%d partial copy of pointer\n",
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
insn->src_reg);
return -EACCES;
}
mark_reg_unknown(env, regs, insn->dst_reg);
coerce_reg_to_size(&regs[insn->dst_reg], 4);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
} else {
/* case: R = imm
* remember the value we stored into this reg
*/
regs[insn->dst_reg].type = SCALAR_VALUE;
if (BPF_CLASS(insn->code) == BPF_ALU64) {
__mark_reg_known(regs + insn->dst_reg,
insn->imm);
} else {
__mark_reg_known(regs + insn->dst_reg,
(u32)insn->imm);
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
} else if (opcode > BPF_END) {
verbose(env, "invalid BPF_ALU opcode %x\n", opcode);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
} else { /* all other ALU ops: and, sub, xor, add, ... */
if (BPF_SRC(insn->code) == BPF_X) {
if (insn->imm != 0 || insn->off != 0) {
verbose(env, "BPF_ALU uses reserved fields\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
/* check src1 operand */
err = check_reg_arg(env, insn->src_reg, SRC_OP);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
} else {
if (insn->src_reg != BPF_REG_0 || insn->off != 0) {
verbose(env, "BPF_ALU uses reserved fields\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
}
/* check src2 operand */
err = check_reg_arg(env, insn->dst_reg, SRC_OP);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
if ((opcode == BPF_MOD || opcode == BPF_DIV) &&
BPF_SRC(insn->code) == BPF_K && insn->imm == 0) {
verbose(env, "div by zero\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
if (opcode == BPF_ARSH && BPF_CLASS(insn->code) != BPF_ALU64) {
verbose(env, "BPF_ARSH not supported for 32 bit ALU\n");
return -EINVAL;
}
if ((opcode == BPF_LSH || opcode == BPF_RSH ||
opcode == BPF_ARSH) && BPF_SRC(insn->code) == BPF_K) {
int size = BPF_CLASS(insn->code) == BPF_ALU64 ? 64 : 32;
if (insn->imm < 0 || insn->imm >= size) {
verbose(env, "invalid shift %d\n", insn->imm);
return -EINVAL;
}
}
/* check dest operand */
err = check_reg_arg(env, insn->dst_reg, DST_OP_NO_MARK);
if (err)
return err;
return adjust_reg_min_max_vals(env, insn);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
return 0;
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
static void find_good_pkt_pointers(struct bpf_verifier_state *vstate,
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
struct bpf_reg_state *dst_reg,
enum bpf_reg_type type,
bool range_right_open)
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
{
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
struct bpf_func_state *state = vstate->frame[vstate->curframe];
struct bpf_reg_state *regs = state->regs, *reg;
u16 new_range;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
int i, j;
bpf: fix range propagation on direct packet access LLVM can generate code that tests for direct packet access via skb->data/data_end in a way that currently gets rejected by the verifier, example: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) invalid access to packet, off=20 size=1, R9(id=0,off=0,r=0) The reason why this gets rejected despite a proper test is that we currently call find_good_pkt_pointers() only in case where we detect tests like rX > pkt_end, where rX is of type pkt(id=Y,off=Z,r=0) and derived, for example, from a register of type pkt(id=Y,off=0,r=0) pointing to skb->data. find_good_pkt_pointers() then fills the range in the current branch to pkt(id=Y,off=0,r=Z) on success. For above case, we need to extend that to recognize pkt_end >= rX pattern and mark the other branch that is taken on success with the appropriate pkt(id=Y,off=0,r=Z) type via find_good_pkt_pointers(). Since eBPF operates on BPF_JGT (>) and BPF_JGE (>=), these are the only two practical options to test for from what LLVM could have generated, since there's no such thing as BPF_JLT (<) or BPF_JLE (<=) that we would need to take into account as well. After the fix: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=54) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=54) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) 29: (bf) r1 = r8 30: (25) if r8 > 0x3c goto pc+47 R1=inv56 R2=imm40 R3=pkt_end R4=inv R6=ctx R8=inv56 R9=pkt(id=0,off=0,r=54) R10=fp 31: (b7) r1 = 1 [...] Verifier test cases are also added in this work, one that demonstrates the mentioned example here and one that tries a bad packet access for the current/fall-through branch (the one with types pkt(id=X,off=Y,r=0), pkt(id=X,off=0,r=0)), then a case with good and bad accesses, and two with both test variants (>, >=). Fixes: 969bf05eb3ce ("bpf: direct packet access") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-07 23:03:42 +00:00
if (dst_reg->off < 0 ||
(dst_reg->off == 0 && range_right_open))
/* This doesn't give us any range */
return;
if (dst_reg->umax_value > MAX_PACKET_OFF ||
dst_reg->umax_value + dst_reg->off > MAX_PACKET_OFF)
/* Risk of overflow. For instance, ptr + (1<<63) may be less
* than pkt_end, but that's because it's also less than pkt.
*/
return;
new_range = dst_reg->off;
if (range_right_open)
new_range--;
/* Examples for register markings:
bpf: fix range propagation on direct packet access LLVM can generate code that tests for direct packet access via skb->data/data_end in a way that currently gets rejected by the verifier, example: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) invalid access to packet, off=20 size=1, R9(id=0,off=0,r=0) The reason why this gets rejected despite a proper test is that we currently call find_good_pkt_pointers() only in case where we detect tests like rX > pkt_end, where rX is of type pkt(id=Y,off=Z,r=0) and derived, for example, from a register of type pkt(id=Y,off=0,r=0) pointing to skb->data. find_good_pkt_pointers() then fills the range in the current branch to pkt(id=Y,off=0,r=Z) on success. For above case, we need to extend that to recognize pkt_end >= rX pattern and mark the other branch that is taken on success with the appropriate pkt(id=Y,off=0,r=Z) type via find_good_pkt_pointers(). Since eBPF operates on BPF_JGT (>) and BPF_JGE (>=), these are the only two practical options to test for from what LLVM could have generated, since there's no such thing as BPF_JLT (<) or BPF_JLE (<=) that we would need to take into account as well. After the fix: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=54) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=54) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) 29: (bf) r1 = r8 30: (25) if r8 > 0x3c goto pc+47 R1=inv56 R2=imm40 R3=pkt_end R4=inv R6=ctx R8=inv56 R9=pkt(id=0,off=0,r=54) R10=fp 31: (b7) r1 = 1 [...] Verifier test cases are also added in this work, one that demonstrates the mentioned example here and one that tries a bad packet access for the current/fall-through branch (the one with types pkt(id=X,off=Y,r=0), pkt(id=X,off=0,r=0)), then a case with good and bad accesses, and two with both test variants (>, >=). Fixes: 969bf05eb3ce ("bpf: direct packet access") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-07 23:03:42 +00:00
*
* pkt_data in dst register:
bpf: fix range propagation on direct packet access LLVM can generate code that tests for direct packet access via skb->data/data_end in a way that currently gets rejected by the verifier, example: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) invalid access to packet, off=20 size=1, R9(id=0,off=0,r=0) The reason why this gets rejected despite a proper test is that we currently call find_good_pkt_pointers() only in case where we detect tests like rX > pkt_end, where rX is of type pkt(id=Y,off=Z,r=0) and derived, for example, from a register of type pkt(id=Y,off=0,r=0) pointing to skb->data. find_good_pkt_pointers() then fills the range in the current branch to pkt(id=Y,off=0,r=Z) on success. For above case, we need to extend that to recognize pkt_end >= rX pattern and mark the other branch that is taken on success with the appropriate pkt(id=Y,off=0,r=Z) type via find_good_pkt_pointers(). Since eBPF operates on BPF_JGT (>) and BPF_JGE (>=), these are the only two practical options to test for from what LLVM could have generated, since there's no such thing as BPF_JLT (<) or BPF_JLE (<=) that we would need to take into account as well. After the fix: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=54) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=54) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) 29: (bf) r1 = r8 30: (25) if r8 > 0x3c goto pc+47 R1=inv56 R2=imm40 R3=pkt_end R4=inv R6=ctx R8=inv56 R9=pkt(id=0,off=0,r=54) R10=fp 31: (b7) r1 = 1 [...] Verifier test cases are also added in this work, one that demonstrates the mentioned example here and one that tries a bad packet access for the current/fall-through branch (the one with types pkt(id=X,off=Y,r=0), pkt(id=X,off=0,r=0)), then a case with good and bad accesses, and two with both test variants (>, >=). Fixes: 969bf05eb3ce ("bpf: direct packet access") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-07 23:03:42 +00:00
*
* r2 = r3;
* r2 += 8;
* if (r2 > pkt_end) goto <handle exception>
* <access okay>
*
bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier Enable the newly added jump opcodes, main parts are in two different areas, namely direct packet access and dynamic map value access. For the direct packet access, we now allow for the following two new patterns to match in order to trigger markings with find_good_pkt_pointers(): Variant 1 (access ok when taking the branch): 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (bf) r0 = r2 3: (07) r0 += 8 4: (ad) if r0 < r3 goto pc+2 R0=pkt(id=0,off=8,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R10=fp 5: (b7) r0 = 0 6: (95) exit from 4 to 7: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R10=fp 7: (71) r0 = *(u8 *)(r2 +0) 8: (05) goto pc-4 5: (b7) r0 = 0 6: (95) exit processed 11 insns, stack depth 0 Variant 2 (access ok on fall-through): 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (bf) r0 = r2 3: (07) r0 += 8 4: (bd) if r3 <= r0 goto pc+1 R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R10=fp 5: (71) r0 = *(u8 *)(r2 +0) 6: (b7) r0 = 1 7: (95) exit from 4 to 6: R0=pkt(id=0,off=8,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R10=fp 6: (b7) r0 = 1 7: (95) exit processed 10 insns, stack depth 0 The above two basically just swap the branches where we need to handle an exception and allow packet access compared to the two already existing variants for find_good_pkt_pointers(). For the dynamic map value access, we add the new instructions to reg_set_min_max() and reg_set_min_max_inv() in order to learn bounds. Verifier test cases for both are added in a follow-up patch. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:40:02 +00:00
* r2 = r3;
* r2 += 8;
* if (r2 < pkt_end) goto <access okay>
* <handle exception>
*
bpf: fix range propagation on direct packet access LLVM can generate code that tests for direct packet access via skb->data/data_end in a way that currently gets rejected by the verifier, example: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) invalid access to packet, off=20 size=1, R9(id=0,off=0,r=0) The reason why this gets rejected despite a proper test is that we currently call find_good_pkt_pointers() only in case where we detect tests like rX > pkt_end, where rX is of type pkt(id=Y,off=Z,r=0) and derived, for example, from a register of type pkt(id=Y,off=0,r=0) pointing to skb->data. find_good_pkt_pointers() then fills the range in the current branch to pkt(id=Y,off=0,r=Z) on success. For above case, we need to extend that to recognize pkt_end >= rX pattern and mark the other branch that is taken on success with the appropriate pkt(id=Y,off=0,r=Z) type via find_good_pkt_pointers(). Since eBPF operates on BPF_JGT (>) and BPF_JGE (>=), these are the only two practical options to test for from what LLVM could have generated, since there's no such thing as BPF_JLT (<) or BPF_JLE (<=) that we would need to take into account as well. After the fix: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=54) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=54) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) 29: (bf) r1 = r8 30: (25) if r8 > 0x3c goto pc+47 R1=inv56 R2=imm40 R3=pkt_end R4=inv R6=ctx R8=inv56 R9=pkt(id=0,off=0,r=54) R10=fp 31: (b7) r1 = 1 [...] Verifier test cases are also added in this work, one that demonstrates the mentioned example here and one that tries a bad packet access for the current/fall-through branch (the one with types pkt(id=X,off=Y,r=0), pkt(id=X,off=0,r=0)), then a case with good and bad accesses, and two with both test variants (>, >=). Fixes: 969bf05eb3ce ("bpf: direct packet access") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-07 23:03:42 +00:00
* Where:
* r2 == dst_reg, pkt_end == src_reg
* r2=pkt(id=n,off=8,r=0)
* r3=pkt(id=n,off=0,r=0)
*
* pkt_data in src register:
bpf: fix range propagation on direct packet access LLVM can generate code that tests for direct packet access via skb->data/data_end in a way that currently gets rejected by the verifier, example: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) invalid access to packet, off=20 size=1, R9(id=0,off=0,r=0) The reason why this gets rejected despite a proper test is that we currently call find_good_pkt_pointers() only in case where we detect tests like rX > pkt_end, where rX is of type pkt(id=Y,off=Z,r=0) and derived, for example, from a register of type pkt(id=Y,off=0,r=0) pointing to skb->data. find_good_pkt_pointers() then fills the range in the current branch to pkt(id=Y,off=0,r=Z) on success. For above case, we need to extend that to recognize pkt_end >= rX pattern and mark the other branch that is taken on success with the appropriate pkt(id=Y,off=0,r=Z) type via find_good_pkt_pointers(). Since eBPF operates on BPF_JGT (>) and BPF_JGE (>=), these are the only two practical options to test for from what LLVM could have generated, since there's no such thing as BPF_JLT (<) or BPF_JLE (<=) that we would need to take into account as well. After the fix: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=54) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=54) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) 29: (bf) r1 = r8 30: (25) if r8 > 0x3c goto pc+47 R1=inv56 R2=imm40 R3=pkt_end R4=inv R6=ctx R8=inv56 R9=pkt(id=0,off=0,r=54) R10=fp 31: (b7) r1 = 1 [...] Verifier test cases are also added in this work, one that demonstrates the mentioned example here and one that tries a bad packet access for the current/fall-through branch (the one with types pkt(id=X,off=Y,r=0), pkt(id=X,off=0,r=0)), then a case with good and bad accesses, and two with both test variants (>, >=). Fixes: 969bf05eb3ce ("bpf: direct packet access") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-07 23:03:42 +00:00
*
* r2 = r3;
* r2 += 8;
* if (pkt_end >= r2) goto <access okay>
* <handle exception>
*
bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier Enable the newly added jump opcodes, main parts are in two different areas, namely direct packet access and dynamic map value access. For the direct packet access, we now allow for the following two new patterns to match in order to trigger markings with find_good_pkt_pointers(): Variant 1 (access ok when taking the branch): 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (bf) r0 = r2 3: (07) r0 += 8 4: (ad) if r0 < r3 goto pc+2 R0=pkt(id=0,off=8,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R10=fp 5: (b7) r0 = 0 6: (95) exit from 4 to 7: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R10=fp 7: (71) r0 = *(u8 *)(r2 +0) 8: (05) goto pc-4 5: (b7) r0 = 0 6: (95) exit processed 11 insns, stack depth 0 Variant 2 (access ok on fall-through): 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (bf) r0 = r2 3: (07) r0 += 8 4: (bd) if r3 <= r0 goto pc+1 R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R10=fp 5: (71) r0 = *(u8 *)(r2 +0) 6: (b7) r0 = 1 7: (95) exit from 4 to 6: R0=pkt(id=0,off=8,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R10=fp 6: (b7) r0 = 1 7: (95) exit processed 10 insns, stack depth 0 The above two basically just swap the branches where we need to handle an exception and allow packet access compared to the two already existing variants for find_good_pkt_pointers(). For the dynamic map value access, we add the new instructions to reg_set_min_max() and reg_set_min_max_inv() in order to learn bounds. Verifier test cases for both are added in a follow-up patch. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:40:02 +00:00
* r2 = r3;
* r2 += 8;
* if (pkt_end <= r2) goto <handle exception>
* <access okay>
*
bpf: fix range propagation on direct packet access LLVM can generate code that tests for direct packet access via skb->data/data_end in a way that currently gets rejected by the verifier, example: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) invalid access to packet, off=20 size=1, R9(id=0,off=0,r=0) The reason why this gets rejected despite a proper test is that we currently call find_good_pkt_pointers() only in case where we detect tests like rX > pkt_end, where rX is of type pkt(id=Y,off=Z,r=0) and derived, for example, from a register of type pkt(id=Y,off=0,r=0) pointing to skb->data. find_good_pkt_pointers() then fills the range in the current branch to pkt(id=Y,off=0,r=Z) on success. For above case, we need to extend that to recognize pkt_end >= rX pattern and mark the other branch that is taken on success with the appropriate pkt(id=Y,off=0,r=Z) type via find_good_pkt_pointers(). Since eBPF operates on BPF_JGT (>) and BPF_JGE (>=), these are the only two practical options to test for from what LLVM could have generated, since there's no such thing as BPF_JLT (<) or BPF_JLE (<=) that we would need to take into account as well. After the fix: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=54) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=54) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) 29: (bf) r1 = r8 30: (25) if r8 > 0x3c goto pc+47 R1=inv56 R2=imm40 R3=pkt_end R4=inv R6=ctx R8=inv56 R9=pkt(id=0,off=0,r=54) R10=fp 31: (b7) r1 = 1 [...] Verifier test cases are also added in this work, one that demonstrates the mentioned example here and one that tries a bad packet access for the current/fall-through branch (the one with types pkt(id=X,off=Y,r=0), pkt(id=X,off=0,r=0)), then a case with good and bad accesses, and two with both test variants (>, >=). Fixes: 969bf05eb3ce ("bpf: direct packet access") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-07 23:03:42 +00:00
* Where:
* pkt_end == dst_reg, r2 == src_reg
* r2=pkt(id=n,off=8,r=0)
* r3=pkt(id=n,off=0,r=0)
*
* Find register r3 and mark its range as r3=pkt(id=n,off=0,r=8)
* or r3=pkt(id=n,off=0,r=8-1), so that range of bytes [r3, r3 + 8)
* and [r3, r3 + 8-1) respectively is safe to access depending on
* the check.
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
*/
bpf: fix range propagation on direct packet access LLVM can generate code that tests for direct packet access via skb->data/data_end in a way that currently gets rejected by the verifier, example: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) invalid access to packet, off=20 size=1, R9(id=0,off=0,r=0) The reason why this gets rejected despite a proper test is that we currently call find_good_pkt_pointers() only in case where we detect tests like rX > pkt_end, where rX is of type pkt(id=Y,off=Z,r=0) and derived, for example, from a register of type pkt(id=Y,off=0,r=0) pointing to skb->data. find_good_pkt_pointers() then fills the range in the current branch to pkt(id=Y,off=0,r=Z) on success. For above case, we need to extend that to recognize pkt_end >= rX pattern and mark the other branch that is taken on success with the appropriate pkt(id=Y,off=0,r=Z) type via find_good_pkt_pointers(). Since eBPF operates on BPF_JGT (>) and BPF_JGE (>=), these are the only two practical options to test for from what LLVM could have generated, since there's no such thing as BPF_JLT (<) or BPF_JLE (<=) that we would need to take into account as well. After the fix: [...] 7: (61) r3 = *(u32 *)(r6 +80) 8: (61) r9 = *(u32 *)(r6 +76) 9: (bf) r2 = r9 10: (07) r2 += 54 11: (3d) if r3 >= r2 goto pc+12 R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp 12: (18) r4 = 0xffffff7a 14: (05) goto pc+430 [...] from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=54) R3=pkt_end R4=inv R6=ctx R9=pkt(id=0,off=0,r=54) R10=fp 24: (7b) *(u64 *)(r10 -40) = r1 25: (b7) r1 = 0 26: (63) *(u32 *)(r6 +56) = r1 27: (b7) r2 = 40 28: (71) r8 = *(u8 *)(r9 +20) 29: (bf) r1 = r8 30: (25) if r8 > 0x3c goto pc+47 R1=inv56 R2=imm40 R3=pkt_end R4=inv R6=ctx R8=inv56 R9=pkt(id=0,off=0,r=54) R10=fp 31: (b7) r1 = 1 [...] Verifier test cases are also added in this work, one that demonstrates the mentioned example here and one that tries a bad packet access for the current/fall-through branch (the one with types pkt(id=X,off=Y,r=0), pkt(id=X,off=0,r=0)), then a case with good and bad accesses, and two with both test variants (>, >=). Fixes: 969bf05eb3ce ("bpf: direct packet access") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-07 23:03:42 +00:00
/* If our ids match, then we must have the same max_value. And we
* don't care about the other reg's fixed offset, since if it's too big
* the range won't allow anything.
* dst_reg->off is known < MAX_PACKET_OFF, therefore it fits in a u16.
*/
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
for (i = 0; i < MAX_BPF_REG; i++)
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
if (regs[i].type == type && regs[i].id == dst_reg->id)
/* keep the maximum range already checked */
regs[i].range = max(regs[i].range, new_range);
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
for (j = 0; j <= vstate->curframe; j++) {
state = vstate->frame[j];
for (i = 0; i < state->allocated_stack / BPF_REG_SIZE; i++) {
if (state->stack[i].slot_type[0] != STACK_SPILL)
continue;
reg = &state->stack[i].spilled_ptr;
if (reg->type == type && reg->id == dst_reg->id)
reg->range = max(reg->range, new_range);
}
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
}
}
/* Adjusts the register min/max values in the case that the dst_reg is the
* variable register that we are working on, and src_reg is a constant or we're
* simply doing a BPF_K check.
* In JEQ/JNE cases we also adjust the var_off values.
*/
static void reg_set_min_max(struct bpf_reg_state *true_reg,
struct bpf_reg_state *false_reg, u64 val,
u8 opcode)
{
/* If the dst_reg is a pointer, we can't learn anything about its
* variable offset from the compare (unless src_reg were a pointer into
* the same object, but we don't bother with that.
* Since false_reg and true_reg have the same type by construction, we
* only need to check one of them for pointerness.
*/
if (__is_pointer_value(false, false_reg))
return;
bpf: fix mixed signed/unsigned derived min/max value bounds Edward reported that there's an issue in min/max value bounds tracking when signed and unsigned compares both provide hints on limits when having unknown variables. E.g. a program such as the following should have been rejected: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff8a94cda93400 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 11: (65) if r1 s> 0x1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=0,max_value=1 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 14: (b7) r0 = 0 15: (95) exit What happens is that in the first part ... 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 ... r1 carries an unsigned value, and is compared as unsigned against a register carrying an immediate. Verifier deduces in reg_set_min_max() that since the compare is unsigned and operation is greater than (>), that in the fall-through/false case, r1's minimum bound must be 0 and maximum bound must be r2. Latter is larger than the bound and thus max value is reset back to being 'invalid' aka BPF_REGISTER_MAX_RANGE. Thus, r1 state is now 'R1=inv,min_value=0'. The subsequent test ... 11: (65) if r1 s> 0x1 goto pc+2 ... is a signed compare of r1 with immediate value 1. Here, verifier deduces in reg_set_min_max() that since the compare is signed this time and operation is greater than (>), that in the fall-through/false case, we can deduce that r1's maximum bound must be 1, meaning with prior test, we result in r1 having the following state: R1=inv,min_value=0,max_value=1. Given that the actual value this holds is -8, the bounds are wrongly deduced. When this is being added to r0 which holds the map_value(_adj) type, then subsequent store access in above case will go through check_mem_access() which invokes check_map_access_adj(), that will then probe whether the map memory is in bounds based on the min_value and max_value as well as access size since the actual unknown value is min_value <= x <= max_value; commit fce366a9dd0d ("bpf, verifier: fix alu ops against map_value{, _adj} register types") provides some more explanation on the semantics. It's worth to note in this context that in the current code, min_value and max_value tracking are used for two things, i) dynamic map value access via check_map_access_adj() and since commit 06c1c049721a ("bpf: allow helpers access to variable memory") ii) also enforced at check_helper_mem_access() when passing a memory address (pointer to packet, map value, stack) and length pair to a helper and the length in this case is an unknown value defining an access range through min_value/max_value in that case. The min_value/max_value tracking is /not/ used in the direct packet access case to track ranges. However, the issue also affects case ii), for example, the following crafted program based on the same principle must be rejected as well: 0: (b7) r2 = 0 1: (bf) r3 = r10 2: (07) r3 += -512 3: (7a) *(u64 *)(r10 -16) = -8 4: (79) r4 = *(u64 *)(r10 -16) 5: (b7) r6 = -1 6: (2d) if r4 > r6 goto pc+5 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 7: (65) if r4 s> 0x1 goto pc+4 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0,max_value=1 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 8: (07) r4 += 1 9: (b7) r5 = 0 10: (6a) *(u16 *)(r10 -512) = 0 11: (85) call bpf_skb_load_bytes#26 12: (b7) r0 = 0 13: (95) exit Meaning, while we initialize the max_value stack slot that the verifier thinks we access in the [1,2] range, in reality we pass -7 as length which is interpreted as u32 in the helper. Thus, this issue is relevant also for the case of helper ranges. Resetting both bounds in check_reg_overflow() in case only one of them exceeds limits is also not enough as similar test can be created that uses values which are within range, thus also here learned min value in r1 is incorrect when mixed with later signed test to create a range: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff880ad081fa00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (65) if r1 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=3,max_value=4 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 14: (b7) r0 = 0 15: (95) exit This leaves us with two options for fixing this: i) to invalidate all prior learned information once we switch signed context, ii) to track min/max signed and unsigned boundaries separately as done in [0]. (Given latter introduces major changes throughout the whole verifier, it's rather net-next material, thus this patch follows option i), meaning we can derive bounds either from only signed tests or only unsigned tests.) There is still the case of adjust_reg_min_max_vals(), where we adjust bounds on ALU operations, meaning programs like the following where boundaries on the reg get mixed in context later on when bounds are merged on the dst reg must get rejected, too: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff89b2bf87ce00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+6 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (b7) r7 = 1 12: (65) if r7 s> 0x0 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,max_value=0 R10=fp 13: (b7) r0 = 0 14: (95) exit from 12 to 15: R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,min_value=1 R10=fp 15: (0f) r7 += r1 16: (65) if r7 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 17: (0f) r0 += r7 18: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=4,max_value=4 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 19: (b7) r0 = 0 20: (95) exit Meaning, in adjust_reg_min_max_vals() we must also reset range values on the dst when src/dst registers have mixed signed/ unsigned derived min/max value bounds with one unbounded value as otherwise they can be added together deducing false boundaries. Once both boundaries are established from either ALU ops or compare operations w/o mixing signed/unsigned insns, then they can safely be added to other regs also having both boundaries established. Adding regs with one unbounded side to a map value where the bounded side has been learned w/o mixing ops is possible, but the resulting map value won't recover from that, meaning such op is considered invalid on the time of actual access. Invalid bounds are set on the dst reg in case i) src reg, or ii) in case dst reg already had them. The only way to recover would be to perform i) ALU ops but only 'add' is allowed on map value types or ii) comparisons, but these are disallowed on pointers in case they span a range. This is fine as only BPF_JEQ and BPF_JNE may be performed on PTR_TO_MAP_VALUE_OR_NULL registers which potentially turn them into PTR_TO_MAP_VALUE type depending on the branch, so only here min/max value cannot be invalidated for them. In terms of state pruning, value_from_signed is considered as well in states_equal() when dealing with adjusted map values. With regards to breaking existing programs, there is a small risk, but use-cases are rather quite narrow where this could occur and mixing compares probably unlikely. Joint work with Josef and Edward. [0] https://lists.iovisor.org/pipermail/iovisor-dev/2017-June/000822.html Fixes: 484611357c19 ("bpf: allow access into map value arrays") Reported-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20 22:00:21 +00:00
switch (opcode) {
case BPF_JEQ:
/* If this is false then we know nothing Jon Snow, but if it is
* true then we know for sure.
*/
__mark_reg_known(true_reg, val);
break;
case BPF_JNE:
/* If this is true we know nothing Jon Snow, but if it is false
* we know the value for sure;
*/
__mark_reg_known(false_reg, val);
break;
case BPF_JGT:
false_reg->umax_value = min(false_reg->umax_value, val);
true_reg->umin_value = max(true_reg->umin_value, val + 1);
break;
case BPF_JSGT:
false_reg->smax_value = min_t(s64, false_reg->smax_value, val);
true_reg->smin_value = max_t(s64, true_reg->smin_value, val + 1);
break;
bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier Enable the newly added jump opcodes, main parts are in two different areas, namely direct packet access and dynamic map value access. For the direct packet access, we now allow for the following two new patterns to match in order to trigger markings with find_good_pkt_pointers(): Variant 1 (access ok when taking the branch): 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (bf) r0 = r2 3: (07) r0 += 8 4: (ad) if r0 < r3 goto pc+2 R0=pkt(id=0,off=8,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R10=fp 5: (b7) r0 = 0 6: (95) exit from 4 to 7: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R10=fp 7: (71) r0 = *(u8 *)(r2 +0) 8: (05) goto pc-4 5: (b7) r0 = 0 6: (95) exit processed 11 insns, stack depth 0 Variant 2 (access ok on fall-through): 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (bf) r0 = r2 3: (07) r0 += 8 4: (bd) if r3 <= r0 goto pc+1 R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R10=fp 5: (71) r0 = *(u8 *)(r2 +0) 6: (b7) r0 = 1 7: (95) exit from 4 to 6: R0=pkt(id=0,off=8,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R10=fp 6: (b7) r0 = 1 7: (95) exit processed 10 insns, stack depth 0 The above two basically just swap the branches where we need to handle an exception and allow packet access compared to the two already existing variants for find_good_pkt_pointers(). For the dynamic map value access, we add the new instructions to reg_set_min_max() and reg_set_min_max_inv() in order to learn bounds. Verifier test cases for both are added in a follow-up patch. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:40:02 +00:00
case BPF_JLT:
false_reg->umin_value = max(false_reg->umin_value, val);
true_reg->umax_value = min(true_reg->umax_value, val - 1);
break;
case BPF_JSLT:
false_reg->smin_value = max_t(s64, false_reg->smin_value, val);
true_reg->smax_value = min_t(s64, true_reg->smax_value, val - 1);
break;
case BPF_JGE:
false_reg->umax_value = min(false_reg->umax_value, val - 1);
true_reg->umin_value = max(true_reg->umin_value, val);
break;
case BPF_JSGE:
false_reg->smax_value = min_t(s64, false_reg->smax_value, val - 1);
true_reg->smin_value = max_t(s64, true_reg->smin_value, val);
break;
bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier Enable the newly added jump opcodes, main parts are in two different areas, namely direct packet access and dynamic map value access. For the direct packet access, we now allow for the following two new patterns to match in order to trigger markings with find_good_pkt_pointers(): Variant 1 (access ok when taking the branch): 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (bf) r0 = r2 3: (07) r0 += 8 4: (ad) if r0 < r3 goto pc+2 R0=pkt(id=0,off=8,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R10=fp 5: (b7) r0 = 0 6: (95) exit from 4 to 7: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R10=fp 7: (71) r0 = *(u8 *)(r2 +0) 8: (05) goto pc-4 5: (b7) r0 = 0 6: (95) exit processed 11 insns, stack depth 0 Variant 2 (access ok on fall-through): 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (bf) r0 = r2 3: (07) r0 += 8 4: (bd) if r3 <= r0 goto pc+1 R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R10=fp 5: (71) r0 = *(u8 *)(r2 +0) 6: (b7) r0 = 1 7: (95) exit from 4 to 6: R0=pkt(id=0,off=8,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R10=fp 6: (b7) r0 = 1 7: (95) exit processed 10 insns, stack depth 0 The above two basically just swap the branches where we need to handle an exception and allow packet access compared to the two already existing variants for find_good_pkt_pointers(). For the dynamic map value access, we add the new instructions to reg_set_min_max() and reg_set_min_max_inv() in order to learn bounds. Verifier test cases for both are added in a follow-up patch. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:40:02 +00:00
case BPF_JLE:
false_reg->umin_value = max(false_reg->umin_value, val + 1);
true_reg->umax_value = min(true_reg->umax_value, val);
break;
case BPF_JSLE:
false_reg->smin_value = max_t(s64, false_reg->smin_value, val + 1);
true_reg->smax_value = min_t(s64, true_reg->smax_value, val);
break;
default:
break;
}
__reg_deduce_bounds(false_reg);
__reg_deduce_bounds(true_reg);
/* We might have learned some bits from the bounds. */
__reg_bound_offset(false_reg);
__reg_bound_offset(true_reg);
/* Intersecting with the old var_off might have improved our bounds
* slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc),
* then new var_off is (0; 0x7f...fc) which improves our umax.
*/
__update_reg_bounds(false_reg);
__update_reg_bounds(true_reg);
}
/* Same as above, but for the case that dst_reg holds a constant and src_reg is
* the variable reg.
*/
static void reg_set_min_max_inv(struct bpf_reg_state *true_reg,
struct bpf_reg_state *false_reg, u64 val,
u8 opcode)
{
if (__is_pointer_value(false, false_reg))
return;
bpf: fix mixed signed/unsigned derived min/max value bounds Edward reported that there's an issue in min/max value bounds tracking when signed and unsigned compares both provide hints on limits when having unknown variables. E.g. a program such as the following should have been rejected: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff8a94cda93400 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 11: (65) if r1 s> 0x1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=0,max_value=1 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 14: (b7) r0 = 0 15: (95) exit What happens is that in the first part ... 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 ... r1 carries an unsigned value, and is compared as unsigned against a register carrying an immediate. Verifier deduces in reg_set_min_max() that since the compare is unsigned and operation is greater than (>), that in the fall-through/false case, r1's minimum bound must be 0 and maximum bound must be r2. Latter is larger than the bound and thus max value is reset back to being 'invalid' aka BPF_REGISTER_MAX_RANGE. Thus, r1 state is now 'R1=inv,min_value=0'. The subsequent test ... 11: (65) if r1 s> 0x1 goto pc+2 ... is a signed compare of r1 with immediate value 1. Here, verifier deduces in reg_set_min_max() that since the compare is signed this time and operation is greater than (>), that in the fall-through/false case, we can deduce that r1's maximum bound must be 1, meaning with prior test, we result in r1 having the following state: R1=inv,min_value=0,max_value=1. Given that the actual value this holds is -8, the bounds are wrongly deduced. When this is being added to r0 which holds the map_value(_adj) type, then subsequent store access in above case will go through check_mem_access() which invokes check_map_access_adj(), that will then probe whether the map memory is in bounds based on the min_value and max_value as well as access size since the actual unknown value is min_value <= x <= max_value; commit fce366a9dd0d ("bpf, verifier: fix alu ops against map_value{, _adj} register types") provides some more explanation on the semantics. It's worth to note in this context that in the current code, min_value and max_value tracking are used for two things, i) dynamic map value access via check_map_access_adj() and since commit 06c1c049721a ("bpf: allow helpers access to variable memory") ii) also enforced at check_helper_mem_access() when passing a memory address (pointer to packet, map value, stack) and length pair to a helper and the length in this case is an unknown value defining an access range through min_value/max_value in that case. The min_value/max_value tracking is /not/ used in the direct packet access case to track ranges. However, the issue also affects case ii), for example, the following crafted program based on the same principle must be rejected as well: 0: (b7) r2 = 0 1: (bf) r3 = r10 2: (07) r3 += -512 3: (7a) *(u64 *)(r10 -16) = -8 4: (79) r4 = *(u64 *)(r10 -16) 5: (b7) r6 = -1 6: (2d) if r4 > r6 goto pc+5 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 7: (65) if r4 s> 0x1 goto pc+4 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0,max_value=1 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 8: (07) r4 += 1 9: (b7) r5 = 0 10: (6a) *(u16 *)(r10 -512) = 0 11: (85) call bpf_skb_load_bytes#26 12: (b7) r0 = 0 13: (95) exit Meaning, while we initialize the max_value stack slot that the verifier thinks we access in the [1,2] range, in reality we pass -7 as length which is interpreted as u32 in the helper. Thus, this issue is relevant also for the case of helper ranges. Resetting both bounds in check_reg_overflow() in case only one of them exceeds limits is also not enough as similar test can be created that uses values which are within range, thus also here learned min value in r1 is incorrect when mixed with later signed test to create a range: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff880ad081fa00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (65) if r1 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=3,max_value=4 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 14: (b7) r0 = 0 15: (95) exit This leaves us with two options for fixing this: i) to invalidate all prior learned information once we switch signed context, ii) to track min/max signed and unsigned boundaries separately as done in [0]. (Given latter introduces major changes throughout the whole verifier, it's rather net-next material, thus this patch follows option i), meaning we can derive bounds either from only signed tests or only unsigned tests.) There is still the case of adjust_reg_min_max_vals(), where we adjust bounds on ALU operations, meaning programs like the following where boundaries on the reg get mixed in context later on when bounds are merged on the dst reg must get rejected, too: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff89b2bf87ce00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+6 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (b7) r7 = 1 12: (65) if r7 s> 0x0 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,max_value=0 R10=fp 13: (b7) r0 = 0 14: (95) exit from 12 to 15: R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,min_value=1 R10=fp 15: (0f) r7 += r1 16: (65) if r7 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 17: (0f) r0 += r7 18: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=4,max_value=4 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 19: (b7) r0 = 0 20: (95) exit Meaning, in adjust_reg_min_max_vals() we must also reset range values on the dst when src/dst registers have mixed signed/ unsigned derived min/max value bounds with one unbounded value as otherwise they can be added together deducing false boundaries. Once both boundaries are established from either ALU ops or compare operations w/o mixing signed/unsigned insns, then they can safely be added to other regs also having both boundaries established. Adding regs with one unbounded side to a map value where the bounded side has been learned w/o mixing ops is possible, but the resulting map value won't recover from that, meaning such op is considered invalid on the time of actual access. Invalid bounds are set on the dst reg in case i) src reg, or ii) in case dst reg already had them. The only way to recover would be to perform i) ALU ops but only 'add' is allowed on map value types or ii) comparisons, but these are disallowed on pointers in case they span a range. This is fine as only BPF_JEQ and BPF_JNE may be performed on PTR_TO_MAP_VALUE_OR_NULL registers which potentially turn them into PTR_TO_MAP_VALUE type depending on the branch, so only here min/max value cannot be invalidated for them. In terms of state pruning, value_from_signed is considered as well in states_equal() when dealing with adjusted map values. With regards to breaking existing programs, there is a small risk, but use-cases are rather quite narrow where this could occur and mixing compares probably unlikely. Joint work with Josef and Edward. [0] https://lists.iovisor.org/pipermail/iovisor-dev/2017-June/000822.html Fixes: 484611357c19 ("bpf: allow access into map value arrays") Reported-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20 22:00:21 +00:00
switch (opcode) {
case BPF_JEQ:
/* If this is false then we know nothing Jon Snow, but if it is
* true then we know for sure.
*/
__mark_reg_known(true_reg, val);
break;
case BPF_JNE:
/* If this is true we know nothing Jon Snow, but if it is false
* we know the value for sure;
*/
__mark_reg_known(false_reg, val);
break;
case BPF_JGT:
true_reg->umax_value = min(true_reg->umax_value, val - 1);
false_reg->umin_value = max(false_reg->umin_value, val);
break;
case BPF_JSGT:
true_reg->smax_value = min_t(s64, true_reg->smax_value, val - 1);
false_reg->smin_value = max_t(s64, false_reg->smin_value, val);
break;
bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier Enable the newly added jump opcodes, main parts are in two different areas, namely direct packet access and dynamic map value access. For the direct packet access, we now allow for the following two new patterns to match in order to trigger markings with find_good_pkt_pointers(): Variant 1 (access ok when taking the branch): 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (bf) r0 = r2 3: (07) r0 += 8 4: (ad) if r0 < r3 goto pc+2 R0=pkt(id=0,off=8,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R10=fp 5: (b7) r0 = 0 6: (95) exit from 4 to 7: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R10=fp 7: (71) r0 = *(u8 *)(r2 +0) 8: (05) goto pc-4 5: (b7) r0 = 0 6: (95) exit processed 11 insns, stack depth 0 Variant 2 (access ok on fall-through): 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (bf) r0 = r2 3: (07) r0 += 8 4: (bd) if r3 <= r0 goto pc+1 R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R10=fp 5: (71) r0 = *(u8 *)(r2 +0) 6: (b7) r0 = 1 7: (95) exit from 4 to 6: R0=pkt(id=0,off=8,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R10=fp 6: (b7) r0 = 1 7: (95) exit processed 10 insns, stack depth 0 The above two basically just swap the branches where we need to handle an exception and allow packet access compared to the two already existing variants for find_good_pkt_pointers(). For the dynamic map value access, we add the new instructions to reg_set_min_max() and reg_set_min_max_inv() in order to learn bounds. Verifier test cases for both are added in a follow-up patch. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:40:02 +00:00
case BPF_JLT:
true_reg->umin_value = max(true_reg->umin_value, val + 1);
false_reg->umax_value = min(false_reg->umax_value, val);
break;
case BPF_JSLT:
true_reg->smin_value = max_t(s64, true_reg->smin_value, val + 1);
false_reg->smax_value = min_t(s64, false_reg->smax_value, val);
break;
case BPF_JGE:
true_reg->umax_value = min(true_reg->umax_value, val);
false_reg->umin_value = max(false_reg->umin_value, val + 1);
break;
case BPF_JSGE:
true_reg->smax_value = min_t(s64, true_reg->smax_value, val);
false_reg->smin_value = max_t(s64, false_reg->smin_value, val + 1);
break;
bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier Enable the newly added jump opcodes, main parts are in two different areas, namely direct packet access and dynamic map value access. For the direct packet access, we now allow for the following two new patterns to match in order to trigger markings with find_good_pkt_pointers(): Variant 1 (access ok when taking the branch): 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (bf) r0 = r2 3: (07) r0 += 8 4: (ad) if r0 < r3 goto pc+2 R0=pkt(id=0,off=8,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R10=fp 5: (b7) r0 = 0 6: (95) exit from 4 to 7: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R10=fp 7: (71) r0 = *(u8 *)(r2 +0) 8: (05) goto pc-4 5: (b7) r0 = 0 6: (95) exit processed 11 insns, stack depth 0 Variant 2 (access ok on fall-through): 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (bf) r0 = r2 3: (07) r0 += 8 4: (bd) if r3 <= r0 goto pc+1 R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R10=fp 5: (71) r0 = *(u8 *)(r2 +0) 6: (b7) r0 = 1 7: (95) exit from 4 to 6: R0=pkt(id=0,off=8,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R10=fp 6: (b7) r0 = 1 7: (95) exit processed 10 insns, stack depth 0 The above two basically just swap the branches where we need to handle an exception and allow packet access compared to the two already existing variants for find_good_pkt_pointers(). For the dynamic map value access, we add the new instructions to reg_set_min_max() and reg_set_min_max_inv() in order to learn bounds. Verifier test cases for both are added in a follow-up patch. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:40:02 +00:00
case BPF_JLE:
true_reg->umin_value = max(true_reg->umin_value, val);
false_reg->umax_value = min(false_reg->umax_value, val - 1);
break;
case BPF_JSLE:
true_reg->smin_value = max_t(s64, true_reg->smin_value, val);
false_reg->smax_value = min_t(s64, false_reg->smax_value, val - 1);
break;
default:
break;
}
__reg_deduce_bounds(false_reg);
__reg_deduce_bounds(true_reg);
/* We might have learned some bits from the bounds. */
__reg_bound_offset(false_reg);
__reg_bound_offset(true_reg);
/* Intersecting with the old var_off might have improved our bounds
* slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc),
* then new var_off is (0; 0x7f...fc) which improves our umax.
*/
__update_reg_bounds(false_reg);
__update_reg_bounds(true_reg);
}
/* Regs are known to be equal, so intersect their min/max/var_off */
static void __reg_combine_min_max(struct bpf_reg_state *src_reg,
struct bpf_reg_state *dst_reg)
{
src_reg->umin_value = dst_reg->umin_value = max(src_reg->umin_value,
dst_reg->umin_value);
src_reg->umax_value = dst_reg->umax_value = min(src_reg->umax_value,
dst_reg->umax_value);
src_reg->smin_value = dst_reg->smin_value = max(src_reg->smin_value,
dst_reg->smin_value);
src_reg->smax_value = dst_reg->smax_value = min(src_reg->smax_value,
dst_reg->smax_value);
src_reg->var_off = dst_reg->var_off = tnum_intersect(src_reg->var_off,
dst_reg->var_off);
/* We might have learned new bounds from the var_off. */
__update_reg_bounds(src_reg);
__update_reg_bounds(dst_reg);
/* We might have learned something about the sign bit. */
__reg_deduce_bounds(src_reg);
__reg_deduce_bounds(dst_reg);
/* We might have learned some bits from the bounds. */
__reg_bound_offset(src_reg);
__reg_bound_offset(dst_reg);
/* Intersecting with the old var_off might have improved our bounds
* slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc),
* then new var_off is (0; 0x7f...fc) which improves our umax.
*/
__update_reg_bounds(src_reg);
__update_reg_bounds(dst_reg);
}
static void reg_combine_min_max(struct bpf_reg_state *true_src,
struct bpf_reg_state *true_dst,
struct bpf_reg_state *false_src,
struct bpf_reg_state *false_dst,
u8 opcode)
{
switch (opcode) {
case BPF_JEQ:
__reg_combine_min_max(true_src, true_dst);
break;
case BPF_JNE:
__reg_combine_min_max(false_src, false_dst);
break;
bpf: fix mixed signed/unsigned derived min/max value bounds Edward reported that there's an issue in min/max value bounds tracking when signed and unsigned compares both provide hints on limits when having unknown variables. E.g. a program such as the following should have been rejected: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff8a94cda93400 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 11: (65) if r1 s> 0x1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=0,max_value=1 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 14: (b7) r0 = 0 15: (95) exit What happens is that in the first part ... 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 ... r1 carries an unsigned value, and is compared as unsigned against a register carrying an immediate. Verifier deduces in reg_set_min_max() that since the compare is unsigned and operation is greater than (>), that in the fall-through/false case, r1's minimum bound must be 0 and maximum bound must be r2. Latter is larger than the bound and thus max value is reset back to being 'invalid' aka BPF_REGISTER_MAX_RANGE. Thus, r1 state is now 'R1=inv,min_value=0'. The subsequent test ... 11: (65) if r1 s> 0x1 goto pc+2 ... is a signed compare of r1 with immediate value 1. Here, verifier deduces in reg_set_min_max() that since the compare is signed this time and operation is greater than (>), that in the fall-through/false case, we can deduce that r1's maximum bound must be 1, meaning with prior test, we result in r1 having the following state: R1=inv,min_value=0,max_value=1. Given that the actual value this holds is -8, the bounds are wrongly deduced. When this is being added to r0 which holds the map_value(_adj) type, then subsequent store access in above case will go through check_mem_access() which invokes check_map_access_adj(), that will then probe whether the map memory is in bounds based on the min_value and max_value as well as access size since the actual unknown value is min_value <= x <= max_value; commit fce366a9dd0d ("bpf, verifier: fix alu ops against map_value{, _adj} register types") provides some more explanation on the semantics. It's worth to note in this context that in the current code, min_value and max_value tracking are used for two things, i) dynamic map value access via check_map_access_adj() and since commit 06c1c049721a ("bpf: allow helpers access to variable memory") ii) also enforced at check_helper_mem_access() when passing a memory address (pointer to packet, map value, stack) and length pair to a helper and the length in this case is an unknown value defining an access range through min_value/max_value in that case. The min_value/max_value tracking is /not/ used in the direct packet access case to track ranges. However, the issue also affects case ii), for example, the following crafted program based on the same principle must be rejected as well: 0: (b7) r2 = 0 1: (bf) r3 = r10 2: (07) r3 += -512 3: (7a) *(u64 *)(r10 -16) = -8 4: (79) r4 = *(u64 *)(r10 -16) 5: (b7) r6 = -1 6: (2d) if r4 > r6 goto pc+5 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 7: (65) if r4 s> 0x1 goto pc+4 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0,max_value=1 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 8: (07) r4 += 1 9: (b7) r5 = 0 10: (6a) *(u16 *)(r10 -512) = 0 11: (85) call bpf_skb_load_bytes#26 12: (b7) r0 = 0 13: (95) exit Meaning, while we initialize the max_value stack slot that the verifier thinks we access in the [1,2] range, in reality we pass -7 as length which is interpreted as u32 in the helper. Thus, this issue is relevant also for the case of helper ranges. Resetting both bounds in check_reg_overflow() in case only one of them exceeds limits is also not enough as similar test can be created that uses values which are within range, thus also here learned min value in r1 is incorrect when mixed with later signed test to create a range: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff880ad081fa00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (65) if r1 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=3,max_value=4 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 14: (b7) r0 = 0 15: (95) exit This leaves us with two options for fixing this: i) to invalidate all prior learned information once we switch signed context, ii) to track min/max signed and unsigned boundaries separately as done in [0]. (Given latter introduces major changes throughout the whole verifier, it's rather net-next material, thus this patch follows option i), meaning we can derive bounds either from only signed tests or only unsigned tests.) There is still the case of adjust_reg_min_max_vals(), where we adjust bounds on ALU operations, meaning programs like the following where boundaries on the reg get mixed in context later on when bounds are merged on the dst reg must get rejected, too: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff89b2bf87ce00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+6 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (b7) r7 = 1 12: (65) if r7 s> 0x0 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,max_value=0 R10=fp 13: (b7) r0 = 0 14: (95) exit from 12 to 15: R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,min_value=1 R10=fp 15: (0f) r7 += r1 16: (65) if r7 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 17: (0f) r0 += r7 18: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=4,max_value=4 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 19: (b7) r0 = 0 20: (95) exit Meaning, in adjust_reg_min_max_vals() we must also reset range values on the dst when src/dst registers have mixed signed/ unsigned derived min/max value bounds with one unbounded value as otherwise they can be added together deducing false boundaries. Once both boundaries are established from either ALU ops or compare operations w/o mixing signed/unsigned insns, then they can safely be added to other regs also having both boundaries established. Adding regs with one unbounded side to a map value where the bounded side has been learned w/o mixing ops is possible, but the resulting map value won't recover from that, meaning such op is considered invalid on the time of actual access. Invalid bounds are set on the dst reg in case i) src reg, or ii) in case dst reg already had them. The only way to recover would be to perform i) ALU ops but only 'add' is allowed on map value types or ii) comparisons, but these are disallowed on pointers in case they span a range. This is fine as only BPF_JEQ and BPF_JNE may be performed on PTR_TO_MAP_VALUE_OR_NULL registers which potentially turn them into PTR_TO_MAP_VALUE type depending on the branch, so only here min/max value cannot be invalidated for them. In terms of state pruning, value_from_signed is considered as well in states_equal() when dealing with adjusted map values. With regards to breaking existing programs, there is a small risk, but use-cases are rather quite narrow where this could occur and mixing compares probably unlikely. Joint work with Josef and Edward. [0] https://lists.iovisor.org/pipermail/iovisor-dev/2017-June/000822.html Fixes: 484611357c19 ("bpf: allow access into map value arrays") Reported-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20 22:00:21 +00:00
}
}
static void mark_map_reg(struct bpf_reg_state *regs, u32 regno, u32 id,
bool is_null)
{
struct bpf_reg_state *reg = &regs[regno];
if (reg->type == PTR_TO_MAP_VALUE_OR_NULL && reg->id == id) {
/* Old offset (both fixed and variable parts) should
* have been known-zero, because we don't allow pointer
* arithmetic on pointers that might be NULL.
*/
if (WARN_ON_ONCE(reg->smin_value || reg->smax_value ||
!tnum_equals_const(reg->var_off, 0) ||
reg->off)) {
__mark_reg_known_zero(reg);
reg->off = 0;
}
if (is_null) {
reg->type = SCALAR_VALUE;
bpf: Add array of maps support This patch adds a few helper funcs to enable map-in-map support (i.e. outer_map->inner_map). The first outer_map type BPF_MAP_TYPE_ARRAY_OF_MAPS is also added in this patch. The next patch will introduce a hash of maps type. Any bpf map type can be acted as an inner_map. The exception is BPF_MAP_TYPE_PROG_ARRAY because the extra level of indirection makes it harder to verify the owner_prog_type and owner_jited. Multi-level map-in-map is not supported (i.e. map->map is ok but not map->map->map). When adding an inner_map to an outer_map, it currently checks the map_type, key_size, value_size, map_flags, max_entries and ops. The verifier also uses those map's properties to do static analysis. map_flags is needed because we need to ensure BPF_PROG_TYPE_PERF_EVENT is using a preallocated hashtab for the inner_hash also. ops and max_entries are needed to generate inlined map-lookup instructions. For simplicity reason, a simple '==' test is used for both map_flags and max_entries. The equality of ops is implied by the equality of map_type. During outer_map creation time, an inner_map_fd is needed to create an outer_map. However, the inner_map_fd's life time does not depend on the outer_map. The inner_map_fd is merely used to initialize the inner_map_meta of the outer_map. Also, for the outer_map: * It allows element update and delete from syscall * It allows element lookup from bpf_prog The above is similar to the current fd_array pattern. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 17:00:33 +00:00
} else if (reg->map_ptr->inner_map_meta) {
reg->type = CONST_PTR_TO_MAP;
reg->map_ptr = reg->map_ptr->inner_map_meta;
} else {
reg->type = PTR_TO_MAP_VALUE;
bpf: Add array of maps support This patch adds a few helper funcs to enable map-in-map support (i.e. outer_map->inner_map). The first outer_map type BPF_MAP_TYPE_ARRAY_OF_MAPS is also added in this patch. The next patch will introduce a hash of maps type. Any bpf map type can be acted as an inner_map. The exception is BPF_MAP_TYPE_PROG_ARRAY because the extra level of indirection makes it harder to verify the owner_prog_type and owner_jited. Multi-level map-in-map is not supported (i.e. map->map is ok but not map->map->map). When adding an inner_map to an outer_map, it currently checks the map_type, key_size, value_size, map_flags, max_entries and ops. The verifier also uses those map's properties to do static analysis. map_flags is needed because we need to ensure BPF_PROG_TYPE_PERF_EVENT is using a preallocated hashtab for the inner_hash also. ops and max_entries are needed to generate inlined map-lookup instructions. For simplicity reason, a simple '==' test is used for both map_flags and max_entries. The equality of ops is implied by the equality of map_type. During outer_map creation time, an inner_map_fd is needed to create an outer_map. However, the inner_map_fd's life time does not depend on the outer_map. The inner_map_fd is merely used to initialize the inner_map_meta of the outer_map. Also, for the outer_map: * It allows element update and delete from syscall * It allows element lookup from bpf_prog The above is similar to the current fd_array pattern. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 17:00:33 +00:00
}
bpf: fix regression on verifier pruning wrt map lookups Commit 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers") introduced a regression where existing programs stopped loading due to reaching the verifier's maximum complexity limit, whereas prior to this commit they were loading just fine; the affected program has roughly 2k instructions. What was found is that state pruning couldn't be performed effectively anymore due to mismatches of the verifier's register state, in particular in the id tracking. It doesn't mean that 57a09bf0a416 is incorrect per se, but rather that verifier needs to perform a lot more work for the same program with regards to involved map lookups. Since commit 57a09bf0a416 is only about tracking registers with type PTR_TO_MAP_VALUE_OR_NULL, the id is only needed to follow registers until they are promoted through pattern matching with a NULL check to either PTR_TO_MAP_VALUE or UNKNOWN_VALUE type. After that point, the id becomes irrelevant for the transitioned types. For UNKNOWN_VALUE, id is already reset to 0 via mark_reg_unknown_value(), but not so for PTR_TO_MAP_VALUE where id is becoming stale. It's even transferred further into other types that don't make use of it. Among others, one example is where UNKNOWN_VALUE is set on function call return with RET_INTEGER return type. states_equal() will then fall through the memcmp() on register state; note that the second memcmp() uses offsetofend(), so the id is part of that since d2a4dd37f6b4 ("bpf: fix state equivalence"). But the bisect pointed already to 57a09bf0a416, where we really reach beyond complexity limit. What I found was that states_equal() often failed in this case due to id mismatches in spilled regs with registers in type PTR_TO_MAP_VALUE. Unlike non-spilled regs, spilled regs just perform a memcmp() on their reg state and don't have any other optimizations in place, therefore also id was relevant in this case for making a pruning decision. We can safely reset id to 0 as well when converting to PTR_TO_MAP_VALUE. For the affected program, it resulted in a ~17 fold reduction of complexity and let the program load fine again. Selftest suite also runs fine. The only other place where env->id_gen is used currently is through direct packet access, but for these cases id is long living, thus a different scenario. Also, the current logic in mark_map_regs() is not fully correct when marking NULL branch with UNKNOWN_VALUE. We need to cache the destination reg's id in any case. Otherwise, once we marked that reg as UNKNOWN_VALUE, it's id is reset and any subsequent registers that hold the original id and are of type PTR_TO_MAP_VALUE_OR_NULL won't be marked UNKNOWN_VALUE anymore, since mark_map_reg() reuses the uncached regs[regno].id that was just overridden. Note, we don't need to cache it outside of mark_map_regs(), since it's called once on this_branch and the other time on other_branch, which are both two independent verifier states. A test case for this is added here, too. Fixes: 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-15 00:30:06 +00:00
/* We don't need id from this point onwards anymore, thus we
* should better reset it, so that state pruning has chances
* to take effect.
*/
reg->id = 0;
}
}
/* The logic is similar to find_good_pkt_pointers(), both could eventually
* be folded together at some point.
*/
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
static void mark_map_regs(struct bpf_verifier_state *vstate, u32 regno,
bool is_null)
{
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
struct bpf_func_state *state = vstate->frame[vstate->curframe];
struct bpf_reg_state *regs = state->regs;
bpf: fix regression on verifier pruning wrt map lookups Commit 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers") introduced a regression where existing programs stopped loading due to reaching the verifier's maximum complexity limit, whereas prior to this commit they were loading just fine; the affected program has roughly 2k instructions. What was found is that state pruning couldn't be performed effectively anymore due to mismatches of the verifier's register state, in particular in the id tracking. It doesn't mean that 57a09bf0a416 is incorrect per se, but rather that verifier needs to perform a lot more work for the same program with regards to involved map lookups. Since commit 57a09bf0a416 is only about tracking registers with type PTR_TO_MAP_VALUE_OR_NULL, the id is only needed to follow registers until they are promoted through pattern matching with a NULL check to either PTR_TO_MAP_VALUE or UNKNOWN_VALUE type. After that point, the id becomes irrelevant for the transitioned types. For UNKNOWN_VALUE, id is already reset to 0 via mark_reg_unknown_value(), but not so for PTR_TO_MAP_VALUE where id is becoming stale. It's even transferred further into other types that don't make use of it. Among others, one example is where UNKNOWN_VALUE is set on function call return with RET_INTEGER return type. states_equal() will then fall through the memcmp() on register state; note that the second memcmp() uses offsetofend(), so the id is part of that since d2a4dd37f6b4 ("bpf: fix state equivalence"). But the bisect pointed already to 57a09bf0a416, where we really reach beyond complexity limit. What I found was that states_equal() often failed in this case due to id mismatches in spilled regs with registers in type PTR_TO_MAP_VALUE. Unlike non-spilled regs, spilled regs just perform a memcmp() on their reg state and don't have any other optimizations in place, therefore also id was relevant in this case for making a pruning decision. We can safely reset id to 0 as well when converting to PTR_TO_MAP_VALUE. For the affected program, it resulted in a ~17 fold reduction of complexity and let the program load fine again. Selftest suite also runs fine. The only other place where env->id_gen is used currently is through direct packet access, but for these cases id is long living, thus a different scenario. Also, the current logic in mark_map_regs() is not fully correct when marking NULL branch with UNKNOWN_VALUE. We need to cache the destination reg's id in any case. Otherwise, once we marked that reg as UNKNOWN_VALUE, it's id is reset and any subsequent registers that hold the original id and are of type PTR_TO_MAP_VALUE_OR_NULL won't be marked UNKNOWN_VALUE anymore, since mark_map_reg() reuses the uncached regs[regno].id that was just overridden. Note, we don't need to cache it outside of mark_map_regs(), since it's called once on this_branch and the other time on other_branch, which are both two independent verifier states. A test case for this is added here, too. Fixes: 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-15 00:30:06 +00:00
u32 id = regs[regno].id;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
int i, j;
for (i = 0; i < MAX_BPF_REG; i++)
mark_map_reg(regs, i, id, is_null);
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
for (j = 0; j <= vstate->curframe; j++) {
state = vstate->frame[j];
for (i = 0; i < state->allocated_stack / BPF_REG_SIZE; i++) {
if (state->stack[i].slot_type[0] != STACK_SPILL)
continue;
mark_map_reg(&state->stack[i].spilled_ptr, 0, id, is_null);
}
}
}
static bool try_match_pkt_pointers(const struct bpf_insn *insn,
struct bpf_reg_state *dst_reg,
struct bpf_reg_state *src_reg,
struct bpf_verifier_state *this_branch,
struct bpf_verifier_state *other_branch)
{
if (BPF_SRC(insn->code) != BPF_X)
return false;
switch (BPF_OP(insn->code)) {
case BPF_JGT:
if ((dst_reg->type == PTR_TO_PACKET &&
src_reg->type == PTR_TO_PACKET_END) ||
(dst_reg->type == PTR_TO_PACKET_META &&
reg_is_init_pkt_pointer(src_reg, PTR_TO_PACKET))) {
/* pkt_data' > pkt_end, pkt_meta' > pkt_data */
find_good_pkt_pointers(this_branch, dst_reg,
dst_reg->type, false);
} else if ((dst_reg->type == PTR_TO_PACKET_END &&
src_reg->type == PTR_TO_PACKET) ||
(reg_is_init_pkt_pointer(dst_reg, PTR_TO_PACKET) &&
src_reg->type == PTR_TO_PACKET_META)) {
/* pkt_end > pkt_data', pkt_data > pkt_meta' */
find_good_pkt_pointers(other_branch, src_reg,
src_reg->type, true);
} else {
return false;
}
break;
case BPF_JLT:
if ((dst_reg->type == PTR_TO_PACKET &&
src_reg->type == PTR_TO_PACKET_END) ||
(dst_reg->type == PTR_TO_PACKET_META &&
reg_is_init_pkt_pointer(src_reg, PTR_TO_PACKET))) {
/* pkt_data' < pkt_end, pkt_meta' < pkt_data */
find_good_pkt_pointers(other_branch, dst_reg,
dst_reg->type, true);
} else if ((dst_reg->type == PTR_TO_PACKET_END &&
src_reg->type == PTR_TO_PACKET) ||
(reg_is_init_pkt_pointer(dst_reg, PTR_TO_PACKET) &&
src_reg->type == PTR_TO_PACKET_META)) {
/* pkt_end < pkt_data', pkt_data > pkt_meta' */
find_good_pkt_pointers(this_branch, src_reg,
src_reg->type, false);
} else {
return false;
}
break;
case BPF_JGE:
if ((dst_reg->type == PTR_TO_PACKET &&
src_reg->type == PTR_TO_PACKET_END) ||
(dst_reg->type == PTR_TO_PACKET_META &&
reg_is_init_pkt_pointer(src_reg, PTR_TO_PACKET))) {
/* pkt_data' >= pkt_end, pkt_meta' >= pkt_data */
find_good_pkt_pointers(this_branch, dst_reg,
dst_reg->type, true);
} else if ((dst_reg->type == PTR_TO_PACKET_END &&
src_reg->type == PTR_TO_PACKET) ||
(reg_is_init_pkt_pointer(dst_reg, PTR_TO_PACKET) &&
src_reg->type == PTR_TO_PACKET_META)) {
/* pkt_end >= pkt_data', pkt_data >= pkt_meta' */
find_good_pkt_pointers(other_branch, src_reg,
src_reg->type, false);
} else {
return false;
}
break;
case BPF_JLE:
if ((dst_reg->type == PTR_TO_PACKET &&
src_reg->type == PTR_TO_PACKET_END) ||
(dst_reg->type == PTR_TO_PACKET_META &&
reg_is_init_pkt_pointer(src_reg, PTR_TO_PACKET))) {
/* pkt_data' <= pkt_end, pkt_meta' <= pkt_data */
find_good_pkt_pointers(other_branch, dst_reg,
dst_reg->type, false);
} else if ((dst_reg->type == PTR_TO_PACKET_END &&
src_reg->type == PTR_TO_PACKET) ||
(reg_is_init_pkt_pointer(dst_reg, PTR_TO_PACKET) &&
src_reg->type == PTR_TO_PACKET_META)) {
/* pkt_end <= pkt_data', pkt_data <= pkt_meta' */
find_good_pkt_pointers(this_branch, src_reg,
src_reg->type, true);
} else {
return false;
}
break;
default:
return false;
}
return true;
}
static int check_cond_jmp_op(struct bpf_verifier_env *env,
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
struct bpf_insn *insn, int *insn_idx)
{
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
struct bpf_verifier_state *this_branch = env->cur_state;
struct bpf_verifier_state *other_branch;
struct bpf_reg_state *regs = this_branch->frame[this_branch->curframe]->regs;
struct bpf_reg_state *dst_reg, *other_branch_regs;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
u8 opcode = BPF_OP(insn->code);
int err;
bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier Enable the newly added jump opcodes, main parts are in two different areas, namely direct packet access and dynamic map value access. For the direct packet access, we now allow for the following two new patterns to match in order to trigger markings with find_good_pkt_pointers(): Variant 1 (access ok when taking the branch): 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (bf) r0 = r2 3: (07) r0 += 8 4: (ad) if r0 < r3 goto pc+2 R0=pkt(id=0,off=8,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R10=fp 5: (b7) r0 = 0 6: (95) exit from 4 to 7: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R10=fp 7: (71) r0 = *(u8 *)(r2 +0) 8: (05) goto pc-4 5: (b7) r0 = 0 6: (95) exit processed 11 insns, stack depth 0 Variant 2 (access ok on fall-through): 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (bf) r0 = r2 3: (07) r0 += 8 4: (bd) if r3 <= r0 goto pc+1 R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R10=fp 5: (71) r0 = *(u8 *)(r2 +0) 6: (b7) r0 = 1 7: (95) exit from 4 to 6: R0=pkt(id=0,off=8,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R10=fp 6: (b7) r0 = 1 7: (95) exit processed 10 insns, stack depth 0 The above two basically just swap the branches where we need to handle an exception and allow packet access compared to the two already existing variants for find_good_pkt_pointers(). For the dynamic map value access, we add the new instructions to reg_set_min_max() and reg_set_min_max_inv() in order to learn bounds. Verifier test cases for both are added in a follow-up patch. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 23:40:02 +00:00
if (opcode > BPF_JSLE) {
verbose(env, "invalid BPF_JMP opcode %x\n", opcode);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
if (BPF_SRC(insn->code) == BPF_X) {
if (insn->imm != 0) {
verbose(env, "BPF_JMP uses reserved fields\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
/* check src1 operand */
err = check_reg_arg(env, insn->src_reg, SRC_OP);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
if (is_pointer_value(env, insn->src_reg)) {
verbose(env, "R%d pointer comparison prohibited\n",
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
insn->src_reg);
return -EACCES;
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
} else {
if (insn->src_reg != BPF_REG_0) {
verbose(env, "BPF_JMP uses reserved fields\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
}
/* check src2 operand */
err = check_reg_arg(env, insn->dst_reg, SRC_OP);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
dst_reg = &regs[insn->dst_reg];
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* detect if R == 0 where R was initialized to zero earlier */
if (BPF_SRC(insn->code) == BPF_K &&
(opcode == BPF_JEQ || opcode == BPF_JNE) &&
dst_reg->type == SCALAR_VALUE &&
tnum_is_const(dst_reg->var_off)) {
if ((opcode == BPF_JEQ && dst_reg->var_off.value == insn->imm) ||
(opcode == BPF_JNE && dst_reg->var_off.value != insn->imm)) {
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* if (imm == imm) goto pc+off;
* only follow the goto, ignore fall-through
*/
*insn_idx += insn->off;
return 0;
} else {
/* if (imm != imm) goto pc+off;
* only follow fall-through branch, since
* that's where the program will go
*/
return 0;
}
}
other_branch = push_stack(env, *insn_idx + insn->off + 1, *insn_idx);
if (!other_branch)
return -EFAULT;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
other_branch_regs = other_branch->frame[other_branch->curframe]->regs;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* detect if we are comparing against a constant value so we can adjust
* our min/max values for our dst register.
* this is only legit if both are scalars (or pointers to the same
* object, I suppose, but we don't support that right now), because
* otherwise the different base pointers mean the offsets aren't
* comparable.
*/
if (BPF_SRC(insn->code) == BPF_X) {
if (dst_reg->type == SCALAR_VALUE &&
regs[insn->src_reg].type == SCALAR_VALUE) {
if (tnum_is_const(regs[insn->src_reg].var_off))
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
reg_set_min_max(&other_branch_regs[insn->dst_reg],
dst_reg, regs[insn->src_reg].var_off.value,
opcode);
else if (tnum_is_const(dst_reg->var_off))
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
reg_set_min_max_inv(&other_branch_regs[insn->src_reg],
&regs[insn->src_reg],
dst_reg->var_off.value, opcode);
else if (opcode == BPF_JEQ || opcode == BPF_JNE)
/* Comparing for equality, we can combine knowledge */
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
reg_combine_min_max(&other_branch_regs[insn->src_reg],
&other_branch_regs[insn->dst_reg],
&regs[insn->src_reg],
&regs[insn->dst_reg], opcode);
}
} else if (dst_reg->type == SCALAR_VALUE) {
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
reg_set_min_max(&other_branch_regs[insn->dst_reg],
dst_reg, insn->imm, opcode);
}
/* detect if R == 0 where R is returned from bpf_map_lookup_elem() */
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (BPF_SRC(insn->code) == BPF_K &&
insn->imm == 0 && (opcode == BPF_JEQ || opcode == BPF_JNE) &&
dst_reg->type == PTR_TO_MAP_VALUE_OR_NULL) {
/* Mark all identical map registers in each branch as either
* safe or unknown depending R == 0 or R != 0 conditional.
*/
mark_map_regs(this_branch, insn->dst_reg, opcode == BPF_JNE);
mark_map_regs(other_branch, insn->dst_reg, opcode == BPF_JEQ);
} else if (!try_match_pkt_pointers(insn, dst_reg, &regs[insn->src_reg],
this_branch, other_branch) &&
is_pointer_value(env, insn->dst_reg)) {
verbose(env, "R%d pointer comparison prohibited\n",
insn->dst_reg);
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
return -EACCES;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
if (env->log.level)
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
print_verifier_state(env, this_branch->frame[this_branch->curframe]);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return 0;
}
/* return the map pointer stored inside BPF_LD_IMM64 instruction */
static struct bpf_map *ld_imm64_to_map_ptr(struct bpf_insn *insn)
{
u64 imm64 = ((u64) (u32) insn[0].imm) | ((u64) (u32) insn[1].imm) << 32;
return (struct bpf_map *) (unsigned long) imm64;
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* verify BPF_LD_IMM64 instruction */
static int check_ld_imm(struct bpf_verifier_env *env, struct bpf_insn *insn)
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
{
struct bpf_reg_state *regs = cur_regs(env);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
int err;
if (BPF_SIZE(insn->code) != BPF_DW) {
verbose(env, "invalid BPF_LD_IMM insn\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
if (insn->off != 0) {
verbose(env, "BPF_LD_IMM64 uses reserved fields\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
err = check_reg_arg(env, insn->dst_reg, DST_OP);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
if (insn->src_reg == 0) {
u64 imm = ((u64)(insn + 1)->imm << 32) | (u32)insn->imm;
regs[insn->dst_reg].type = SCALAR_VALUE;
__mark_reg_known(&regs[insn->dst_reg], imm);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return 0;
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* replace_map_fd_with_map_ptr() should have caught bad ld_imm64 */
BUG_ON(insn->src_reg != BPF_PSEUDO_MAP_FD);
regs[insn->dst_reg].type = CONST_PTR_TO_MAP;
regs[insn->dst_reg].map_ptr = ld_imm64_to_map_ptr(insn);
return 0;
}
static bool may_access_skb(enum bpf_prog_type type)
{
switch (type) {
case BPF_PROG_TYPE_SOCKET_FILTER:
case BPF_PROG_TYPE_SCHED_CLS:
case BPF_PROG_TYPE_SCHED_ACT:
return true;
default:
return false;
}
}
/* verify safety of LD_ABS|LD_IND instructions:
* - they can only appear in the programs where ctx == skb
* - since they are wrappers of function calls, they scratch R1-R5 registers,
* preserve R6-R9, and store return value into R0
*
* Implicit input:
* ctx == skb == R6 == CTX
*
* Explicit input:
* SRC == any register
* IMM == 32-bit immediate
*
* Output:
* R0 - 8/16/32-bit skb data converted to cpu endianness
*/
static int check_ld_abs(struct bpf_verifier_env *env, struct bpf_insn *insn)
{
struct bpf_reg_state *regs = cur_regs(env);
u8 mode = BPF_MODE(insn->code);
int i, err;
if (!may_access_skb(env->prog->type)) {
verbose(env, "BPF_LD_[ABS|IND] instructions not allowed for this program type\n");
return -EINVAL;
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
if (env->subprog_cnt) {
/* when program has LD_ABS insn JITs and interpreter assume
* that r1 == ctx == skb which is not the case for callees
* that can have arbitrary arguments. It's problematic
* for main prog as well since JITs would need to analyze
* all functions in order to make proper register save/restore
* decisions in the main prog. Hence disallow LD_ABS with calls
*/
verbose(env, "BPF_LD_[ABS|IND] instructions cannot be mixed with bpf-to-bpf calls\n");
return -EINVAL;
}
if (insn->dst_reg != BPF_REG_0 || insn->off != 0 ||
BPF_SIZE(insn->code) == BPF_DW ||
(mode == BPF_ABS && insn->src_reg != BPF_REG_0)) {
verbose(env, "BPF_LD_[ABS|IND] uses reserved fields\n");
return -EINVAL;
}
/* check whether implicit source operand (register R6) is readable */
err = check_reg_arg(env, BPF_REG_6, SRC_OP);
if (err)
return err;
if (regs[BPF_REG_6].type != PTR_TO_CTX) {
verbose(env,
"at the time of BPF_LD_ABS|IND R6 != pointer to skb\n");
return -EINVAL;
}
if (mode == BPF_IND) {
/* check explicit source operand */
err = check_reg_arg(env, insn->src_reg, SRC_OP);
if (err)
return err;
}
/* reset caller saved regs to unreadable */
for (i = 0; i < CALLER_SAVED_REGS; i++) {
mark_reg_not_init(env, regs, caller_saved[i]);
check_reg_arg(env, caller_saved[i], DST_OP_NO_MARK);
}
/* mark destination R0 register as readable, since it contains
* the value fetched from the packet.
* Already marked as written above.
*/
mark_reg_unknown(env, regs, BPF_REG_0);
return 0;
}
static int check_return_code(struct bpf_verifier_env *env)
{
struct bpf_reg_state *reg;
struct tnum range = tnum_range(0, 1);
switch (env->prog->type) {
case BPF_PROG_TYPE_CGROUP_SKB:
case BPF_PROG_TYPE_CGROUP_SOCK:
case BPF_PROG_TYPE_SOCK_OPS:
case BPF_PROG_TYPE_CGROUP_DEVICE:
break;
default:
return 0;
}
reg = cur_regs(env) + BPF_REG_0;
if (reg->type != SCALAR_VALUE) {
verbose(env, "At program exit the register R0 is not a known value (%s)\n",
reg_type_str[reg->type]);
return -EINVAL;
}
if (!tnum_in(range, reg->var_off)) {
verbose(env, "At program exit the register R0 ");
if (!tnum_is_unknown(reg->var_off)) {
char tn_buf[48];
tnum_strn(tn_buf, sizeof(tn_buf), reg->var_off);
verbose(env, "has value %s", tn_buf);
} else {
verbose(env, "has unknown scalar value");
}
verbose(env, " should have been 0 or 1\n");
return -EINVAL;
}
return 0;
}
/* non-recursive DFS pseudo code
* 1 procedure DFS-iterative(G,v):
* 2 label v as discovered
* 3 let S be a stack
* 4 S.push(v)
* 5 while S is not empty
* 6 t <- S.pop()
* 7 if t is what we're looking for:
* 8 return t
* 9 for all edges e in G.adjacentEdges(t) do
* 10 if edge e is already labelled
* 11 continue with the next edge
* 12 w <- G.adjacentVertex(t,e)
* 13 if vertex w is not discovered and not explored
* 14 label e as tree-edge
* 15 label w as discovered
* 16 S.push(w)
* 17 continue at 5
* 18 else if vertex w is discovered
* 19 label e as back-edge
* 20 else
* 21 // vertex w is explored
* 22 label e as forward- or cross-edge
* 23 label t as explored
* 24 S.pop()
*
* convention:
* 0x10 - discovered
* 0x11 - discovered and fall-through edge labelled
* 0x12 - discovered and fall-through and branch edges labelled
* 0x20 - explored
*/
enum {
DISCOVERED = 0x10,
EXPLORED = 0x20,
FALLTHROUGH = 1,
BRANCH = 2,
};
#define STATE_LIST_MARK ((struct bpf_verifier_state_list *) -1L)
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
static int *insn_stack; /* stack of insns to process */
static int cur_stack; /* current stack index */
static int *insn_state;
/* t, w, e - match pseudo-code above:
* t - index of current instruction
* w - next instruction
* e - edge
*/
static int push_insn(int t, int w, int e, struct bpf_verifier_env *env)
{
if (e == FALLTHROUGH && insn_state[t] >= (DISCOVERED | FALLTHROUGH))
return 0;
if (e == BRANCH && insn_state[t] >= (DISCOVERED | BRANCH))
return 0;
if (w < 0 || w >= env->prog->len) {
verbose(env, "jump out of range from insn %d to %d\n", t, w);
return -EINVAL;
}
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
if (e == BRANCH)
/* mark branch target for state pruning */
env->explored_states[w] = STATE_LIST_MARK;
if (insn_state[w] == 0) {
/* tree-edge */
insn_state[t] = DISCOVERED | e;
insn_state[w] = DISCOVERED;
if (cur_stack >= env->prog->len)
return -E2BIG;
insn_stack[cur_stack++] = w;
return 1;
} else if ((insn_state[w] & 0xF0) == DISCOVERED) {
verbose(env, "back-edge from insn %d to %d\n", t, w);
return -EINVAL;
} else if (insn_state[w] == EXPLORED) {
/* forward- or cross-edge */
insn_state[t] = DISCOVERED | e;
} else {
verbose(env, "insn state internal bug\n");
return -EFAULT;
}
return 0;
}
/* non-recursive depth-first-search to detect loops in BPF program
* loop == back-edge in directed graph
*/
static int check_cfg(struct bpf_verifier_env *env)
{
struct bpf_insn *insns = env->prog->insnsi;
int insn_cnt = env->prog->len;
int ret = 0;
int i, t;
bpf: introduce function calls (function boundaries) Allow arbitrary function calls from bpf function to another bpf function. Since the beginning of bpf all bpf programs were represented as a single function and program authors were forced to use always_inline for all functions in their C code. That was causing llvm to unnecessary inflate the code size and forcing developers to move code to header files with little code reuse. With a bit of additional complexity teach verifier to recognize arbitrary function calls from one bpf function to another as long as all of functions are presented to the verifier as a single bpf program. New program layout: r6 = r1 // some code .. r1 = .. // arg1 r2 = .. // arg2 call pc+1 // function call pc-relative exit .. = r1 // access arg1 .. = r2 // access arg2 .. call pc+20 // second level of function call ... It allows for better optimized code and finally allows to introduce the core bpf libraries that can be reused in different projects, since programs are no longer limited by single elf file. With function calls bpf can be compiled into multiple .o files. This patch is the first step. It detects programs that contain multiple functions and checks that calls between them are valid. It splits the sequence of bpf instructions (one program) into a set of bpf functions that call each other. Calls to only known functions are allowed. In the future the verifier may allow calls to unresolved functions and will do dynamic linking. This logic supports statically linked bpf functions only. Such function boundary detection could have been done as part of control flow graph building in check_cfg(), but it's cleaner to separate function boundary detection vs control flow checks within a subprogram (function) into logically indepedent steps. Follow up patches may split check_cfg() further, but not check_subprogs(). Only allow bpf-to-bpf calls for root only and for non-hw-offloaded programs. These restrictions can be relaxed in the future. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:05 +00:00
ret = check_subprogs(env);
if (ret < 0)
return ret;
insn_state = kcalloc(insn_cnt, sizeof(int), GFP_KERNEL);
if (!insn_state)
return -ENOMEM;
insn_stack = kcalloc(insn_cnt, sizeof(int), GFP_KERNEL);
if (!insn_stack) {
kfree(insn_state);
return -ENOMEM;
}
insn_state[0] = DISCOVERED; /* mark 1st insn as discovered */
insn_stack[0] = 0; /* 0 is the first instruction */
cur_stack = 1;
peek_stack:
if (cur_stack == 0)
goto check_state;
t = insn_stack[cur_stack - 1];
if (BPF_CLASS(insns[t].code) == BPF_JMP) {
u8 opcode = BPF_OP(insns[t].code);
if (opcode == BPF_EXIT) {
goto mark_explored;
} else if (opcode == BPF_CALL) {
ret = push_insn(t, t + 1, FALLTHROUGH, env);
if (ret == 1)
goto peek_stack;
else if (ret < 0)
goto err_free;
bpf, verifier: further improve search pruning The verifier needs to go through every path of the program in order to check that it terminates safely, which can be quite a lot of instructions that need to be processed f.e. in cases with more branchy programs. With search pruning from f1bca824dabb ("bpf: add search pruning optimization to verifier") the search space can already be reduced significantly when the verifier detects that a previously walked path with same register and stack contents terminated already (see verifier's states_equal()), so the search can skip walking those states. When working with larger programs of > ~2000 (out of max 4096) insns, we found that the current limit of 32k instructions is easily hit. For example, a case we ran into is that the search space cannot be pruned due to branches at the beginning of the program that make use of certain stack space slots (STACK_MISC), which are never used in the remaining program (STACK_INVALID). Therefore, the verifier needs to walk paths for the slots in STACK_INVALID state, but also all remaining paths with a stack structure, where the slots are in STACK_MISC, which can nearly double the search space needed. After various experiments, we find that a limit of 64k processed insns is a more reasonable choice when dealing with larger programs in practice. This still allows to reject extreme crafted cases that can have a much higher complexity (f.e. > ~300k) within the 4096 insns limit due to search pruning not being able to take effect. Furthermore, we found that a lot of states can be pruned after a call instruction, f.e. we were able to reduce the search state by ~35% in some cases with this heuristic, trade-off is to keep a bit more states in env->explored_states. Usually, call instructions have a number of preceding register assignments and/or stack stores, where search pruning has a better chance to suceed in states_equal() test. The current code marks the branch targets with STATE_LIST_MARK in case of conditional jumps, and the next (t + 1) instruction in case of unconditional jump so that f.e. a backjump will walk it. We also did experiments with using t + insns[t].off + 1 as a marker in the unconditionally jump case instead of t + 1 with the rationale that these two branches of execution that converge after the label might have more potential of pruning. We found that it was a bit better, but not necessarily significantly better than the current state, perhaps also due to clang not generating back jumps often. Hence, we left that as is for now. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05 20:33:17 +00:00
if (t + 1 < insn_cnt)
env->explored_states[t + 1] = STATE_LIST_MARK;
bpf: introduce function calls (function boundaries) Allow arbitrary function calls from bpf function to another bpf function. Since the beginning of bpf all bpf programs were represented as a single function and program authors were forced to use always_inline for all functions in their C code. That was causing llvm to unnecessary inflate the code size and forcing developers to move code to header files with little code reuse. With a bit of additional complexity teach verifier to recognize arbitrary function calls from one bpf function to another as long as all of functions are presented to the verifier as a single bpf program. New program layout: r6 = r1 // some code .. r1 = .. // arg1 r2 = .. // arg2 call pc+1 // function call pc-relative exit .. = r1 // access arg1 .. = r2 // access arg2 .. call pc+20 // second level of function call ... It allows for better optimized code and finally allows to introduce the core bpf libraries that can be reused in different projects, since programs are no longer limited by single elf file. With function calls bpf can be compiled into multiple .o files. This patch is the first step. It detects programs that contain multiple functions and checks that calls between them are valid. It splits the sequence of bpf instructions (one program) into a set of bpf functions that call each other. Calls to only known functions are allowed. In the future the verifier may allow calls to unresolved functions and will do dynamic linking. This logic supports statically linked bpf functions only. Such function boundary detection could have been done as part of control flow graph building in check_cfg(), but it's cleaner to separate function boundary detection vs control flow checks within a subprogram (function) into logically indepedent steps. Follow up patches may split check_cfg() further, but not check_subprogs(). Only allow bpf-to-bpf calls for root only and for non-hw-offloaded programs. These restrictions can be relaxed in the future. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:05 +00:00
if (insns[t].src_reg == BPF_PSEUDO_CALL) {
env->explored_states[t] = STATE_LIST_MARK;
ret = push_insn(t, t + insns[t].imm + 1, BRANCH, env);
if (ret == 1)
goto peek_stack;
else if (ret < 0)
goto err_free;
}
} else if (opcode == BPF_JA) {
if (BPF_SRC(insns[t].code) != BPF_K) {
ret = -EINVAL;
goto err_free;
}
/* unconditional jump with single edge */
ret = push_insn(t, t + insns[t].off + 1,
FALLTHROUGH, env);
if (ret == 1)
goto peek_stack;
else if (ret < 0)
goto err_free;
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
/* tell verifier to check for equivalent states
* after every call and jump
*/
if (t + 1 < insn_cnt)
env->explored_states[t + 1] = STATE_LIST_MARK;
} else {
/* conditional jump with two edges */
bpf: adjust verifier heuristics Current limits with regards to processing program paths do not really reflect today's needs anymore due to programs becoming more complex and verifier smarter, keeping track of more data such as const ALU operations, alignment tracking, spilling of PTR_TO_MAP_VALUE_ADJ registers, and other features allowing for smarter matching of what LLVM generates. This also comes with the side-effect that we result in fewer opportunities to prune search states and thus often need to do more work to prove safety than in the past due to different register states and stack layout where we mismatch. Generally, it's quite hard to determine what caused a sudden increase in complexity, it could be caused by something as trivial as a single branch somewhere at the beginning of the program where LLVM assigned a stack slot that is marked differently throughout other branches and thus causing a mismatch, where verifier then needs to prove safety for the whole rest of the program. Subsequently, programs with even less than half the insn size limit can get rejected. We noticed that while some programs load fine under pre 4.11, they get rejected due to hitting limits on more recent kernels. We saw that in the vast majority of cases (90+%) pruning failed due to register mismatches. In case of stack mismatches, majority of cases failed due to different stack slot types (invalid, spill, misc) rather than differences in spilled registers. This patch makes pruning more aggressive by also adding markers that sit at conditional jumps as well. Currently, we only mark jump targets for pruning. For example in direct packet access, these are usually error paths where we bail out. We found that adding these markers, it can reduce number of processed insns by up to 30%. Another option is to ignore reg->id in probing PTR_TO_MAP_VALUE_OR_NULL registers, which can help pruning slightly as well by up to 7% observed complexity reduction as stand-alone. Meaning, if a previous path with register type PTR_TO_MAP_VALUE_OR_NULL for map X was found to be safe, then in the current state a PTR_TO_MAP_VALUE_OR_NULL register for the same map X must be safe as well. Last but not least the patch also adds a scheduling point and bumps the current limit for instructions to be processed to a more adequate value. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18 01:00:06 +00:00
env->explored_states[t] = STATE_LIST_MARK;
ret = push_insn(t, t + 1, FALLTHROUGH, env);
if (ret == 1)
goto peek_stack;
else if (ret < 0)
goto err_free;
ret = push_insn(t, t + insns[t].off + 1, BRANCH, env);
if (ret == 1)
goto peek_stack;
else if (ret < 0)
goto err_free;
}
} else {
/* all other non-branch instructions with single
* fall-through edge
*/
ret = push_insn(t, t + 1, FALLTHROUGH, env);
if (ret == 1)
goto peek_stack;
else if (ret < 0)
goto err_free;
}
mark_explored:
insn_state[t] = EXPLORED;
if (cur_stack-- <= 0) {
verbose(env, "pop stack internal bug\n");
ret = -EFAULT;
goto err_free;
}
goto peek_stack;
check_state:
for (i = 0; i < insn_cnt; i++) {
if (insn_state[i] != EXPLORED) {
verbose(env, "unreachable insn %d\n", i);
ret = -EINVAL;
goto err_free;
}
}
ret = 0; /* cfg looks good */
err_free:
kfree(insn_state);
kfree(insn_stack);
return ret;
}
/* check %cur's range satisfies %old's */
static bool range_within(struct bpf_reg_state *old,
struct bpf_reg_state *cur)
{
return old->umin_value <= cur->umin_value &&
old->umax_value >= cur->umax_value &&
old->smin_value <= cur->smin_value &&
old->smax_value >= cur->smax_value;
}
/* Maximum number of register states that can exist at once */
#define ID_MAP_SIZE (MAX_BPF_REG + MAX_BPF_STACK / BPF_REG_SIZE)
struct idpair {
u32 old;
u32 cur;
};
/* If in the old state two registers had the same id, then they need to have
* the same id in the new state as well. But that id could be different from
* the old state, so we need to track the mapping from old to new ids.
* Once we have seen that, say, a reg with old id 5 had new id 9, any subsequent
* regs with old id 5 must also have new id 9 for the new state to be safe. But
* regs with a different old id could still have new id 9, we don't care about
* that.
* So we look through our idmap to see if this old id has been seen before. If
* so, we require the new id to match; otherwise, we add the id pair to the map.
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
*/
static bool check_ids(u32 old_id, u32 cur_id, struct idpair *idmap)
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
{
unsigned int i;
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
for (i = 0; i < ID_MAP_SIZE; i++) {
if (!idmap[i].old) {
/* Reached an empty slot; haven't seen this id before */
idmap[i].old = old_id;
idmap[i].cur = cur_id;
return true;
}
if (idmap[i].old == old_id)
return idmap[i].cur == cur_id;
}
/* We ran out of idmap slots, which should be impossible */
WARN_ON_ONCE(1);
return false;
}
/* Returns true if (rold safe implies rcur safe) */
static bool regsafe(struct bpf_reg_state *rold, struct bpf_reg_state *rcur,
struct idpair *idmap)
{
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
bool equal;
if (!(rold->live & REG_LIVE_READ))
/* explored state didn't use this */
return true;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
equal = memcmp(rold, rcur, offsetof(struct bpf_reg_state, frameno)) == 0;
if (rold->type == PTR_TO_STACK)
/* two stack pointers are equal only if they're pointing to
* the same stack frame, since fp-8 in foo != fp-8 in bar
*/
return equal && rold->frameno == rcur->frameno;
if (equal)
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
return true;
if (rold->type == NOT_INIT)
/* explored state can't have used this */
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
return true;
if (rcur->type == NOT_INIT)
return false;
switch (rold->type) {
case SCALAR_VALUE:
if (rcur->type == SCALAR_VALUE) {
/* new val must satisfy old val knowledge */
return range_within(rold, rcur) &&
tnum_in(rold->var_off, rcur->var_off);
} else {
/* We're trying to use a pointer in place of a scalar.
* Even if the scalar was unbounded, this could lead to
* pointer leaks because scalars are allowed to leak
* while pointers are not. We could make this safe in
* special cases if root is calling us, but it's
* probably not worth the hassle.
*/
return false;
}
case PTR_TO_MAP_VALUE:
/* If the new min/max/var_off satisfy the old ones and
* everything else matches, we are OK.
* We don't care about the 'id' value, because nothing
* uses it for PTR_TO_MAP_VALUE (only for ..._OR_NULL)
*/
return memcmp(rold, rcur, offsetof(struct bpf_reg_state, id)) == 0 &&
range_within(rold, rcur) &&
tnum_in(rold->var_off, rcur->var_off);
case PTR_TO_MAP_VALUE_OR_NULL:
/* a PTR_TO_MAP_VALUE could be safe to use as a
* PTR_TO_MAP_VALUE_OR_NULL into the same map.
* However, if the old PTR_TO_MAP_VALUE_OR_NULL then got NULL-
* checked, doing so could have affected others with the same
* id, and we can't check for that because we lost the id when
* we converted to a PTR_TO_MAP_VALUE.
*/
if (rcur->type != PTR_TO_MAP_VALUE_OR_NULL)
return false;
if (memcmp(rold, rcur, offsetof(struct bpf_reg_state, id)))
return false;
/* Check our ids match any regs they're supposed to */
return check_ids(rold->id, rcur->id, idmap);
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
case PTR_TO_PACKET_META:
case PTR_TO_PACKET:
bpf: add meta pointer for direct access This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 00:25:51 +00:00
if (rcur->type != rold->type)
return false;
/* We must have at least as much range as the old ptr
* did, so that any accesses which were safe before are
* still safe. This is true even if old range < old off,
* since someone could have accessed through (ptr - k), or
* even done ptr -= k in a register, to get a safe access.
*/
if (rold->range > rcur->range)
return false;
/* If the offsets don't match, we can't trust our alignment;
* nor can we be sure that we won't fall out of range.
*/
if (rold->off != rcur->off)
return false;
/* id relations must be preserved */
if (rold->id && !check_ids(rold->id, rcur->id, idmap))
return false;
/* new val must satisfy old val knowledge */
return range_within(rold, rcur) &&
tnum_in(rold->var_off, rcur->var_off);
case PTR_TO_CTX:
case CONST_PTR_TO_MAP:
case PTR_TO_PACKET_END:
/* Only valid matches are exact, which memcmp() above
* would have accepted
*/
default:
/* Don't know what's going on, just say it's not safe */
return false;
}
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
/* Shouldn't get here; if we do, say it's not safe */
WARN_ON_ONCE(1);
bpf: direct packet access Extended BPF carried over two instructions from classic to access packet data: LD_ABS and LD_IND. They're highly optimized in JITs, but due to their design they have to do length check for every access. When BPF is processing 20M packets per second single LD_ABS after JIT is consuming 3% cpu. Hence the need to optimize it further by amortizing the cost of 'off < skb_headlen' over multiple packet accesses. One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW with similar usage as skb_header_pointer(). The kernel part for interpreter and x64 JIT was implemented in [1], but such new insns behave like old ld_abs and abort the program with 'return 0' if access is beyond linear data. Such hidden control flow is hard to workaround plus changing JITs and rolling out new llvm is incovenient. Therefore allow cls_bpf/act_bpf program access skb->data directly: int bpf_prog(struct __sk_buff *skb) { struct iphdr *ip; if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end) /* packet too small */ return 0; ip = skb->data + ETH_HLEN; /* access IP header fields with direct loads */ if (ip->version != 4 || ip->saddr == 0x7f000001) return 1; [...] } This solution avoids introduction of new instructions. llvm stays the same and all JITs stay the same, but verifier has to work extra hard to prove safety of the above program. For XDP the direct store instructions can be allowed as well. The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check the alignment. The complex packet parsers where packet pointer is adjusted incrementally cannot be tracked for alignment, so allow byte access in such cases and misaligned access on architectures that define efficient_unaligned_access [1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06 02:49:10 +00:00
return false;
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
static bool stacksafe(struct bpf_func_state *old,
struct bpf_func_state *cur,
struct idpair *idmap)
{
int i, spi;
/* if explored stack has more populated slots than current stack
* such stacks are not equivalent
*/
if (old->allocated_stack > cur->allocated_stack)
return false;
/* walk slots of the explored stack and ignore any additional
* slots in the current stack, since explored(safe) state
* didn't use them
*/
for (i = 0; i < old->allocated_stack; i++) {
spi = i / BPF_REG_SIZE;
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
if (!(old->stack[spi].spilled_ptr.live & REG_LIVE_READ))
/* explored state didn't use this */
bpf: fix stacksafe exploration when comparing states Commit cc2b14d51053 ("bpf: teach verifier to recognize zero initialized stack") introduced a very relaxed check when comparing stacks of different states, effectively returning a positive result in many cases where it shouldn't. This can create problems in cases such as this following C pseudocode: long var; long *x = bpf_map_lookup(...); if (!x) return; if (*x != 0xbeef) var = 0; else var = 1; /* This is the key part, calling a helper causes an explored state * to be saved with the information that "var" is on the stack as * STACK_ZERO, since the helper is first met by the verifier after * the "var = 0" assignment. This state will however be wrongly used * also for the "var = 1" case, so the verifier assumes "var" is always * 0 and will replace the NULL assignment with nops, because the * search pruning prevents it from exploring the faulty branch. */ bpf_ktime_get_ns(); if (var) *(long *)0 = 0xbeef; Fix the issue by making sure that the stack is fully explored before returning a positive comparison result. Also attach a couple tests that highlight the bad behavior. In the first test, without this fix instructions 16 and 17 are replaced with nops instead of being rejected by the verifier. The second test, instead, allows a program to make a potentially illegal read from the stack. Fixes: cc2b14d51053 ("bpf: teach verifier to recognize zero initialized stack") Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-12-23 10:09:55 +00:00
continue;
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
if (old->stack[spi].slot_type[i % BPF_REG_SIZE] == STACK_INVALID)
continue;
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
/* if old state was safe with misc data in the stack
* it will be safe with zero-initialized stack.
* The opposite is not true
*/
if (old->stack[spi].slot_type[i % BPF_REG_SIZE] == STACK_MISC &&
cur->stack[spi].slot_type[i % BPF_REG_SIZE] == STACK_ZERO)
continue;
if (old->stack[spi].slot_type[i % BPF_REG_SIZE] !=
cur->stack[spi].slot_type[i % BPF_REG_SIZE])
/* Ex: old explored (safe) state has STACK_SPILL in
* this stack slot, but current has has STACK_MISC ->
* this verifier states are not equivalent,
* return false to continue verification of this path
*/
return false;
if (i % BPF_REG_SIZE)
continue;
if (old->stack[spi].slot_type[0] != STACK_SPILL)
continue;
if (!regsafe(&old->stack[spi].spilled_ptr,
&cur->stack[spi].spilled_ptr,
idmap))
/* when explored and current stack slot are both storing
* spilled registers, check that stored pointers types
* are the same as well.
* Ex: explored safe path could have stored
* (bpf_reg_state) {.type = PTR_TO_STACK, .off = -8}
* but current path has stored:
* (bpf_reg_state) {.type = PTR_TO_STACK, .off = -16}
* such verifier states are not equivalent.
* return false to continue verification of this path
*/
return false;
}
return true;
}
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
/* compare two verifier states
*
* all states stored in state_list are known to be valid, since
* verifier reached 'bpf_exit' instruction through them
*
* this function is called when verifier exploring different branches of
* execution popped from the state stack. If it sees an old state that has
* more strict register state and more strict stack state then this execution
* branch doesn't need to be explored further, since verifier already
* concluded that more strict state leads to valid finish.
*
* Therefore two states are equivalent if register state is more conservative
* and explored stack state is more conservative than the current one.
* Example:
* explored current
* (slot1=INV slot2=MISC) == (slot1=MISC slot2=MISC)
* (slot1=MISC slot2=MISC) != (slot1=INV slot2=MISC)
*
* In other words if current stack state (one being explored) has more
* valid slots than old one that already passed validation, it means
* the verifier can stop exploring and conclude that current state is valid too
*
* Similarly with registers. If explored state has register type as invalid
* whereas register type in current state is meaningful, it means that
* the current state will reach 'bpf_exit' instruction safely
*/
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
static bool func_states_equal(struct bpf_func_state *old,
struct bpf_func_state *cur)
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
{
struct idpair *idmap;
bool ret = false;
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
int i;
idmap = kcalloc(ID_MAP_SIZE, sizeof(struct idpair), GFP_KERNEL);
/* If we failed to allocate the idmap, just say it's not safe */
if (!idmap)
return false;
for (i = 0; i < MAX_BPF_REG; i++) {
if (!regsafe(&old->regs[i], &cur->regs[i], idmap))
goto out_free;
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
}
if (!stacksafe(old, cur, idmap))
goto out_free;
ret = true;
out_free:
kfree(idmap);
return ret;
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
static bool states_equal(struct bpf_verifier_env *env,
struct bpf_verifier_state *old,
struct bpf_verifier_state *cur)
{
int i;
if (old->curframe != cur->curframe)
return false;
/* for states to be equal callsites have to be the same
* and all frame states need to be equivalent
*/
for (i = 0; i <= old->curframe; i++) {
if (old->frame[i]->callsite != cur->frame[i]->callsite)
return false;
if (!func_states_equal(old->frame[i], cur->frame[i]))
return false;
}
return true;
}
/* A write screens off any subsequent reads; but write marks come from the
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
* straight-line code between a state and its parent. When we arrive at an
* equivalent state (jump target or such) we didn't arrive by the straight-line
* code, so read marks in the state must propagate to the parent regardless
* of the state's write marks. That's what 'parent == state->parent' comparison
* in mark_reg_read() and mark_stack_slot_read() is for.
*/
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
static int propagate_liveness(struct bpf_verifier_env *env,
const struct bpf_verifier_state *vstate,
struct bpf_verifier_state *vparent)
{
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
int i, frame, err = 0;
struct bpf_func_state *state, *parent;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
if (vparent->curframe != vstate->curframe) {
WARN(1, "propagate_live: parent frame %d current frame %d\n",
vparent->curframe, vstate->curframe);
return -EFAULT;
}
/* Propagate read liveness of registers... */
BUILD_BUG_ON(BPF_REG_FP + 1 != MAX_BPF_REG);
/* We don't need to worry about FP liveness because it's read-only */
for (i = 0; i < BPF_REG_FP; i++) {
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
if (vparent->frame[vparent->curframe]->regs[i].live & REG_LIVE_READ)
continue;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
if (vstate->frame[vstate->curframe]->regs[i].live & REG_LIVE_READ) {
err = mark_reg_read(env, vstate, vparent, i);
if (err)
return err;
}
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
/* ... and stack slots */
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
for (frame = 0; frame <= vstate->curframe; frame++) {
state = vstate->frame[frame];
parent = vparent->frame[frame];
for (i = 0; i < state->allocated_stack / BPF_REG_SIZE &&
i < parent->allocated_stack / BPF_REG_SIZE; i++) {
if (parent->stack[i].spilled_ptr.live & REG_LIVE_READ)
continue;
if (state->stack[i].spilled_ptr.live & REG_LIVE_READ)
mark_stack_slot_read(env, vstate, vparent, i, frame);
}
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
return err;
}
static int is_state_visited(struct bpf_verifier_env *env, int insn_idx)
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
{
struct bpf_verifier_state_list *new_sl;
struct bpf_verifier_state_list *sl;
struct bpf_verifier_state *cur = env->cur_state;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
int i, j, err;
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
sl = env->explored_states[insn_idx];
if (!sl)
/* this 'insn_idx' instruction wasn't marked, so we will not
* be doing state search here
*/
return 0;
while (sl != STATE_LIST_MARK) {
if (states_equal(env, &sl->state, cur)) {
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
/* reached equivalent register/stack state,
* prune the search.
* Registers read by the continuation are read by us.
* If we have any write marks in env->cur_state, they
* will prevent corresponding reads in the continuation
* from reaching our parent (an explored_state). Our
* own state will get the read marks recorded, but
* they'll be immediately forgotten as we're pruning
* this state and will pop a new one.
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
*/
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
err = propagate_liveness(env, &sl->state, cur);
if (err)
return err;
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
return 1;
}
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
sl = sl->next;
}
/* there were no equivalent states, remember current one.
* technically the current state is not proven to be safe yet,
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
* but it will either reach outer most bpf_exit (which means it's safe)
* or it will be rejected. Since there are no loops, we won't be
* seeing this tuple (frame[0].callsite, frame[1].callsite, .. insn_idx)
* again on the way to bpf_exit
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
*/
new_sl = kzalloc(sizeof(struct bpf_verifier_state_list), GFP_KERNEL);
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
if (!new_sl)
return -ENOMEM;
/* add new state to the head of linked list */
err = copy_verifier_state(&new_sl->state, cur);
if (err) {
free_verifier_state(&new_sl->state, false);
kfree(new_sl);
return err;
}
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
new_sl->next = env->explored_states[insn_idx];
env->explored_states[insn_idx] = new_sl;
/* connect new state to parentage chain */
cur->parent = &new_sl->state;
/* clear write marks in current state: the writes we did are not writes
* our child did, so they don't screen off its reads from us.
* (There are no read marks in current state, because reads always mark
* their parent and current state never has children yet. Only
* explored_states can get read marks.)
*/
for (i = 0; i < BPF_REG_FP; i++)
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
cur->frame[cur->curframe]->regs[i].live = REG_LIVE_NONE;
/* all stack frames are accessible from callee, clear them all */
for (j = 0; j <= cur->curframe; j++) {
struct bpf_func_state *frame = cur->frame[j];
for (i = 0; i < frame->allocated_stack / BPF_REG_SIZE; i++)
bpf: teach verifier to recognize zero initialized stack programs with function calls are often passing various pointers via stack. When all calls are inlined llvm flattens stack accesses and optimizes away extra branches. When functions are not inlined it becomes the job of the verifier to recognize zero initialized stack to avoid exploring paths that program will not take. The following program would fail otherwise: ptr = &buffer_on_stack; *ptr = 0; ... func_call(.., ptr, ...) { if (..) *ptr = bpf_map_lookup(); } ... if (*ptr != 0) { // Access (*ptr)->field is valid. // Without stack_zero tracking such (*ptr)->field access // will be rejected } since stack slots are no longer uniform invalid | spill | misc add liveness marking to all slots, but do it in 8 byte chunks. So if nothing was read or written in [fp-16, fp-9] range it will be marked as LIVE_NONE. If any byte in that range was read, it will be marked LIVE_READ and stacksafe() check will perform byte-by-byte verification. If all bytes in the range were written the slot will be marked as LIVE_WRITTEN. This significantly speeds up state equality comparison and reduces total number of states processed. before after bpf_lb-DLB_L3.o 2051 2003 bpf_lb-DLB_L4.o 3287 3164 bpf_lb-DUNKNOWN.o 1080 1080 bpf_lxc-DDROP_ALL.o 24980 12361 bpf_lxc-DUNKNOWN.o 34308 16605 bpf_netdev.o 15404 10962 bpf_overlay.o 7191 6679 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:08 +00:00
frame->stack[i].spilled_ptr.live = REG_LIVE_NONE;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
}
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
return 0;
}
static int do_check(struct bpf_verifier_env *env)
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
{
struct bpf_verifier_state *state;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
struct bpf_insn *insns = env->prog->insnsi;
struct bpf_reg_state *regs;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
int insn_cnt = env->prog->len, i;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
int insn_idx, prev_insn_idx = 0;
int insn_processed = 0;
bool do_print_state = false;
state = kzalloc(sizeof(struct bpf_verifier_state), GFP_KERNEL);
if (!state)
return -ENOMEM;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
state->curframe = 0;
state->parent = NULL;
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
state->frame[0] = kzalloc(sizeof(struct bpf_func_state), GFP_KERNEL);
if (!state->frame[0]) {
kfree(state);
return -ENOMEM;
}
env->cur_state = state;
init_func_state(env, state->frame[0],
BPF_MAIN_FUNC /* callsite */,
0 /* frameno */,
0 /* subprogno, zero == main subprog */);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
insn_idx = 0;
for (;;) {
struct bpf_insn *insn;
u8 class;
int err;
if (insn_idx >= insn_cnt) {
verbose(env, "invalid insn idx %d insn_cnt %d\n",
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
insn_idx, insn_cnt);
return -EFAULT;
}
insn = &insns[insn_idx];
class = BPF_CLASS(insn->code);
bpf, verifier: further improve search pruning The verifier needs to go through every path of the program in order to check that it terminates safely, which can be quite a lot of instructions that need to be processed f.e. in cases with more branchy programs. With search pruning from f1bca824dabb ("bpf: add search pruning optimization to verifier") the search space can already be reduced significantly when the verifier detects that a previously walked path with same register and stack contents terminated already (see verifier's states_equal()), so the search can skip walking those states. When working with larger programs of > ~2000 (out of max 4096) insns, we found that the current limit of 32k instructions is easily hit. For example, a case we ran into is that the search space cannot be pruned due to branches at the beginning of the program that make use of certain stack space slots (STACK_MISC), which are never used in the remaining program (STACK_INVALID). Therefore, the verifier needs to walk paths for the slots in STACK_INVALID state, but also all remaining paths with a stack structure, where the slots are in STACK_MISC, which can nearly double the search space needed. After various experiments, we find that a limit of 64k processed insns is a more reasonable choice when dealing with larger programs in practice. This still allows to reject extreme crafted cases that can have a much higher complexity (f.e. > ~300k) within the 4096 insns limit due to search pruning not being able to take effect. Furthermore, we found that a lot of states can be pruned after a call instruction, f.e. we were able to reduce the search state by ~35% in some cases with this heuristic, trade-off is to keep a bit more states in env->explored_states. Usually, call instructions have a number of preceding register assignments and/or stack stores, where search pruning has a better chance to suceed in states_equal() test. The current code marks the branch targets with STATE_LIST_MARK in case of conditional jumps, and the next (t + 1) instruction in case of unconditional jump so that f.e. a backjump will walk it. We also did experiments with using t + insns[t].off + 1 as a marker in the unconditionally jump case instead of t + 1 with the rationale that these two branches of execution that converge after the label might have more potential of pruning. We found that it was a bit better, but not necessarily significantly better than the current state, perhaps also due to clang not generating back jumps often. Hence, we left that as is for now. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05 20:33:17 +00:00
if (++insn_processed > BPF_COMPLEXITY_LIMIT_INSNS) {
verbose(env,
"BPF program is too large. Processed %d insn\n",
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
insn_processed);
return -E2BIG;
}
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
err = is_state_visited(env, insn_idx);
if (err < 0)
return err;
if (err == 1) {
/* found equivalent state, can prune the search */
if (env->log.level) {
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
if (do_print_state)
verbose(env, "\nfrom %d to %d: safe\n",
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
prev_insn_idx, insn_idx);
else
verbose(env, "%d: safe\n", insn_idx);
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
}
goto process_bpf_exit;
}
bpf: adjust verifier heuristics Current limits with regards to processing program paths do not really reflect today's needs anymore due to programs becoming more complex and verifier smarter, keeping track of more data such as const ALU operations, alignment tracking, spilling of PTR_TO_MAP_VALUE_ADJ registers, and other features allowing for smarter matching of what LLVM generates. This also comes with the side-effect that we result in fewer opportunities to prune search states and thus often need to do more work to prove safety than in the past due to different register states and stack layout where we mismatch. Generally, it's quite hard to determine what caused a sudden increase in complexity, it could be caused by something as trivial as a single branch somewhere at the beginning of the program where LLVM assigned a stack slot that is marked differently throughout other branches and thus causing a mismatch, where verifier then needs to prove safety for the whole rest of the program. Subsequently, programs with even less than half the insn size limit can get rejected. We noticed that while some programs load fine under pre 4.11, they get rejected due to hitting limits on more recent kernels. We saw that in the vast majority of cases (90+%) pruning failed due to register mismatches. In case of stack mismatches, majority of cases failed due to different stack slot types (invalid, spill, misc) rather than differences in spilled registers. This patch makes pruning more aggressive by also adding markers that sit at conditional jumps as well. Currently, we only mark jump targets for pruning. For example in direct packet access, these are usually error paths where we bail out. We found that adding these markers, it can reduce number of processed insns by up to 30%. Another option is to ignore reg->id in probing PTR_TO_MAP_VALUE_OR_NULL registers, which can help pruning slightly as well by up to 7% observed complexity reduction as stand-alone. Meaning, if a previous path with register type PTR_TO_MAP_VALUE_OR_NULL for map X was found to be safe, then in the current state a PTR_TO_MAP_VALUE_OR_NULL register for the same map X must be safe as well. Last but not least the patch also adds a scheduling point and bumps the current limit for instructions to be processed to a more adequate value. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18 01:00:06 +00:00
if (need_resched())
cond_resched();
if (env->log.level > 1 || (env->log.level && do_print_state)) {
if (env->log.level > 1)
verbose(env, "%d:", insn_idx);
else
verbose(env, "\nfrom %d to %d:",
prev_insn_idx, insn_idx);
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
print_verifier_state(env, state->frame[state->curframe]);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
do_print_state = false;
}
if (env->log.level) {
bpf: allow for correlation of maps and helpers in dump Currently a dump of an xlated prog (post verifier stage) doesn't correlate used helpers as well as maps. The prog info lists involved map ids, however there's no correlation of where in the program they are used as of today. Likewise, bpftool does not correlate helper calls with the target functions. The latter can be done w/o any kernel changes through kallsyms, and also has the advantage that this works with inlined helpers and BPF calls. Example, via interpreter: # tc filter show dev foo ingress filter protocol all pref 49152 bpf chain 0 filter protocol all pref 49152 bpf chain 0 handle 0x1 foo.o:[ingress] \ direct-action not_in_hw id 1 tag c74773051b364165 <-- prog id:1 * Output before patch (calls/maps remain unclear): # bpftool prog dump xlated id 1 <-- dump prog id:1 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = 0xffff95c47a8d4800 6: (85) call unknown#73040 7: (15) if r0 == 0x0 goto pc+18 8: (bf) r2 = r10 9: (07) r2 += -4 10: (bf) r1 = r0 11: (85) call unknown#73040 12: (15) if r0 == 0x0 goto pc+23 [...] * Output after patch: # bpftool prog dump xlated id 1 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] <-- map id:2 6: (85) call bpf_map_lookup_elem#73424 <-- helper call 7: (15) if r0 == 0x0 goto pc+18 8: (bf) r2 = r10 9: (07) r2 += -4 10: (bf) r1 = r0 11: (85) call bpf_map_lookup_elem#73424 12: (15) if r0 == 0x0 goto pc+23 [...] # bpftool map show id 2 <-- show/dump/etc map id:2 2: hash_of_maps flags 0x0 key 4B value 4B max_entries 3 memlock 4096B Example, JITed, same prog: # tc filter show dev foo ingress filter protocol all pref 49152 bpf chain 0 filter protocol all pref 49152 bpf chain 0 handle 0x1 foo.o:[ingress] \ direct-action not_in_hw id 3 tag c74773051b364165 jited # bpftool prog show id 3 3: sched_cls tag c74773051b364165 loaded_at Dec 19/13:48 uid 0 xlated 384B jited 257B memlock 4096B map_ids 2 # bpftool prog dump xlated id 3 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] <-- map id:2 6: (85) call __htab_map_lookup_elem#77408 <-+ inlined rewrite 7: (15) if r0 == 0x0 goto pc+2 | 8: (07) r0 += 56 | 9: (79) r0 = *(u64 *)(r0 +0) <-+ 10: (15) if r0 == 0x0 goto pc+24 11: (bf) r2 = r10 12: (07) r2 += -4 [...] Example, same prog, but kallsyms disabled (in that case we are also not allowed to pass any relative offsets, etc, so prog becomes pointer sanitized on dump): # sysctl kernel.kptr_restrict=2 kernel.kptr_restrict = 2 # bpftool prog dump xlated id 3 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] 6: (85) call bpf_unspec#0 7: (15) if r0 == 0x0 goto pc+2 [...] Example, BPF calls via interpreter: # bpftool prog dump xlated id 1 0: (85) call pc+2#__bpf_prog_run_args32 1: (b7) r0 = 1 2: (95) exit 3: (b7) r0 = 2 4: (95) exit Example, BPF calls via JIT: # sysctl net.core.bpf_jit_enable=1 net.core.bpf_jit_enable = 1 # sysctl net.core.bpf_jit_kallsyms=1 net.core.bpf_jit_kallsyms = 1 # bpftool prog dump xlated id 1 0: (85) call pc+2#bpf_prog_3b185187f1855c4c_F 1: (b7) r0 = 1 2: (95) exit 3: (b7) r0 = 2 4: (95) exit And finally, an example for tail calls that is now working as well wrt correlation: # bpftool prog dump xlated id 2 [...] 10: (b7) r2 = 8 11: (85) call bpf_trace_printk#-41312 12: (bf) r1 = r6 13: (18) r2 = map[id:1] 15: (b7) r3 = 0 16: (85) call bpf_tail_call#12 17: (b7) r1 = 42 18: (6b) *(u16 *)(r6 +46) = r1 19: (b7) r0 = 0 20: (95) exit # bpftool map show id 1 1: prog_array flags 0x0 key 4B value 4B max_entries 1 memlock 4096B Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-12-20 12:42:57 +00:00
const struct bpf_insn_cbs cbs = {
.cb_print = verbose,
};
verbose(env, "%d: ", insn_idx);
bpf: allow for correlation of maps and helpers in dump Currently a dump of an xlated prog (post verifier stage) doesn't correlate used helpers as well as maps. The prog info lists involved map ids, however there's no correlation of where in the program they are used as of today. Likewise, bpftool does not correlate helper calls with the target functions. The latter can be done w/o any kernel changes through kallsyms, and also has the advantage that this works with inlined helpers and BPF calls. Example, via interpreter: # tc filter show dev foo ingress filter protocol all pref 49152 bpf chain 0 filter protocol all pref 49152 bpf chain 0 handle 0x1 foo.o:[ingress] \ direct-action not_in_hw id 1 tag c74773051b364165 <-- prog id:1 * Output before patch (calls/maps remain unclear): # bpftool prog dump xlated id 1 <-- dump prog id:1 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = 0xffff95c47a8d4800 6: (85) call unknown#73040 7: (15) if r0 == 0x0 goto pc+18 8: (bf) r2 = r10 9: (07) r2 += -4 10: (bf) r1 = r0 11: (85) call unknown#73040 12: (15) if r0 == 0x0 goto pc+23 [...] * Output after patch: # bpftool prog dump xlated id 1 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] <-- map id:2 6: (85) call bpf_map_lookup_elem#73424 <-- helper call 7: (15) if r0 == 0x0 goto pc+18 8: (bf) r2 = r10 9: (07) r2 += -4 10: (bf) r1 = r0 11: (85) call bpf_map_lookup_elem#73424 12: (15) if r0 == 0x0 goto pc+23 [...] # bpftool map show id 2 <-- show/dump/etc map id:2 2: hash_of_maps flags 0x0 key 4B value 4B max_entries 3 memlock 4096B Example, JITed, same prog: # tc filter show dev foo ingress filter protocol all pref 49152 bpf chain 0 filter protocol all pref 49152 bpf chain 0 handle 0x1 foo.o:[ingress] \ direct-action not_in_hw id 3 tag c74773051b364165 jited # bpftool prog show id 3 3: sched_cls tag c74773051b364165 loaded_at Dec 19/13:48 uid 0 xlated 384B jited 257B memlock 4096B map_ids 2 # bpftool prog dump xlated id 3 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] <-- map id:2 6: (85) call __htab_map_lookup_elem#77408 <-+ inlined rewrite 7: (15) if r0 == 0x0 goto pc+2 | 8: (07) r0 += 56 | 9: (79) r0 = *(u64 *)(r0 +0) <-+ 10: (15) if r0 == 0x0 goto pc+24 11: (bf) r2 = r10 12: (07) r2 += -4 [...] Example, same prog, but kallsyms disabled (in that case we are also not allowed to pass any relative offsets, etc, so prog becomes pointer sanitized on dump): # sysctl kernel.kptr_restrict=2 kernel.kptr_restrict = 2 # bpftool prog dump xlated id 3 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] 6: (85) call bpf_unspec#0 7: (15) if r0 == 0x0 goto pc+2 [...] Example, BPF calls via interpreter: # bpftool prog dump xlated id 1 0: (85) call pc+2#__bpf_prog_run_args32 1: (b7) r0 = 1 2: (95) exit 3: (b7) r0 = 2 4: (95) exit Example, BPF calls via JIT: # sysctl net.core.bpf_jit_enable=1 net.core.bpf_jit_enable = 1 # sysctl net.core.bpf_jit_kallsyms=1 net.core.bpf_jit_kallsyms = 1 # bpftool prog dump xlated id 1 0: (85) call pc+2#bpf_prog_3b185187f1855c4c_F 1: (b7) r0 = 1 2: (95) exit 3: (b7) r0 = 2 4: (95) exit And finally, an example for tail calls that is now working as well wrt correlation: # bpftool prog dump xlated id 2 [...] 10: (b7) r2 = 8 11: (85) call bpf_trace_printk#-41312 12: (bf) r1 = r6 13: (18) r2 = map[id:1] 15: (b7) r3 = 0 16: (85) call bpf_tail_call#12 17: (b7) r1 = 42 18: (6b) *(u16 *)(r6 +46) = r1 19: (b7) r0 = 0 20: (95) exit # bpftool map show id 1 1: prog_array flags 0x0 key 4B value 4B max_entries 1 memlock 4096B Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-12-20 12:42:57 +00:00
print_bpf_insn(&cbs, env, insn, env->allow_ptr_leaks);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
}
if (bpf_prog_is_dev_bound(env->prog->aux)) {
err = bpf_prog_offload_verify_insn(env, insn_idx,
prev_insn_idx);
if (err)
return err;
}
regs = cur_regs(env);
env->insn_aux_data[insn_idx].seen = true;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (class == BPF_ALU || class == BPF_ALU64) {
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
err = check_alu_op(env, insn);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
} else if (class == BPF_LDX) {
enum bpf_reg_type *prev_src_type, src_reg_type;
/* check for reserved fields is already done */
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* check src operand */
err = check_reg_arg(env, insn->src_reg, SRC_OP);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
err = check_reg_arg(env, insn->dst_reg, DST_OP_NO_MARK);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
src_reg_type = regs[insn->src_reg].type;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* check that memory (src_reg + off) is readable,
* the state of dst_reg will be updated by this func
*/
err = check_mem_access(env, insn_idx, insn->src_reg, insn->off,
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
BPF_SIZE(insn->code), BPF_READ,
insn->dst_reg);
if (err)
return err;
prev_src_type = &env->insn_aux_data[insn_idx].ptr_type;
if (*prev_src_type == NOT_INIT) {
/* saw a valid insn
* dst_reg = *(u32 *)(src_reg + off)
* save type to validate intersecting paths
*/
*prev_src_type = src_reg_type;
} else if (src_reg_type != *prev_src_type &&
(src_reg_type == PTR_TO_CTX ||
*prev_src_type == PTR_TO_CTX)) {
/* ABuser program is trying to use the same insn
* dst_reg = *(u32*) (src_reg + off)
* with different pointer types:
* src_reg == ctx in one branch and
* src_reg == stack|map in some other branch.
* Reject it.
*/
verbose(env, "same insn cannot be used with different pointers\n");
return -EINVAL;
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
} else if (class == BPF_STX) {
enum bpf_reg_type *prev_dst_type, dst_reg_type;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (BPF_MODE(insn->code) == BPF_XADD) {
err = check_xadd(env, insn_idx, insn);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
insn_idx++;
continue;
}
/* check src1 operand */
err = check_reg_arg(env, insn->src_reg, SRC_OP);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
/* check src2 operand */
err = check_reg_arg(env, insn->dst_reg, SRC_OP);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
dst_reg_type = regs[insn->dst_reg].type;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* check that memory (dst_reg + off) is writeable */
err = check_mem_access(env, insn_idx, insn->dst_reg, insn->off,
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
BPF_SIZE(insn->code), BPF_WRITE,
insn->src_reg);
if (err)
return err;
prev_dst_type = &env->insn_aux_data[insn_idx].ptr_type;
if (*prev_dst_type == NOT_INIT) {
*prev_dst_type = dst_reg_type;
} else if (dst_reg_type != *prev_dst_type &&
(dst_reg_type == PTR_TO_CTX ||
*prev_dst_type == PTR_TO_CTX)) {
verbose(env, "same insn cannot be used with different pointers\n");
return -EINVAL;
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
} else if (class == BPF_ST) {
if (BPF_MODE(insn->code) != BPF_MEM ||
insn->src_reg != BPF_REG_0) {
verbose(env, "BPF_ST uses reserved fields\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
/* check src operand */
err = check_reg_arg(env, insn->dst_reg, SRC_OP);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
/* check that memory (dst_reg + off) is writeable */
err = check_mem_access(env, insn_idx, insn->dst_reg, insn->off,
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
BPF_SIZE(insn->code), BPF_WRITE,
-1);
if (err)
return err;
} else if (class == BPF_JMP) {
u8 opcode = BPF_OP(insn->code);
if (opcode == BPF_CALL) {
if (BPF_SRC(insn->code) != BPF_K ||
insn->off != 0 ||
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
(insn->src_reg != BPF_REG_0 &&
insn->src_reg != BPF_PSEUDO_CALL) ||
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
insn->dst_reg != BPF_REG_0) {
verbose(env, "BPF_CALL uses reserved fields\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
if (insn->src_reg == BPF_PSEUDO_CALL)
err = check_func_call(env, insn, &insn_idx);
else
err = check_helper_call(env, insn->imm, insn_idx);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
} else if (opcode == BPF_JA) {
if (BPF_SRC(insn->code) != BPF_K ||
insn->imm != 0 ||
insn->src_reg != BPF_REG_0 ||
insn->dst_reg != BPF_REG_0) {
verbose(env, "BPF_JA uses reserved fields\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
insn_idx += insn->off + 1;
continue;
} else if (opcode == BPF_EXIT) {
if (BPF_SRC(insn->code) != BPF_K ||
insn->imm != 0 ||
insn->src_reg != BPF_REG_0 ||
insn->dst_reg != BPF_REG_0) {
verbose(env, "BPF_EXIT uses reserved fields\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
if (state->curframe) {
/* exit from nested function */
prev_insn_idx = insn_idx;
err = prepare_func_exit(env, &insn_idx);
if (err)
return err;
do_print_state = true;
continue;
}
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
/* eBPF calling convetion is such that R0 is used
* to return the value from eBPF program.
* Make sure that it's readable at this time
* of bpf_exit, which means that program wrote
* something into it earlier
*/
err = check_reg_arg(env, BPF_REG_0, SRC_OP);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
if (err)
return err;
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
if (is_pointer_value(env, BPF_REG_0)) {
verbose(env, "R0 leaks addr as return value\n");
bpf: enable non-root eBPF programs In order to let unprivileged users load and execute eBPF programs teach verifier to prevent pointer leaks. Verifier will prevent - any arithmetic on pointers (except R10+Imm which is used to compute stack addresses) - comparison of pointers (except if (map_value_ptr == 0) ... ) - passing pointers to helper functions - indirectly passing pointers in stack to helper functions - returning pointer from bpf program - storing pointers into ctx or maps Spill/fill of pointers into stack is allowed, but mangling of pointers stored in the stack or reading them byte by byte is not. Within bpf programs the pointers do exist, since programs need to be able to access maps, pass skb pointer to LD_ABS insns, etc but programs cannot pass such pointer values to the outside or obfuscate them. Only allow BPF_PROG_TYPE_SOCKET_FILTER unprivileged programs, so that socket filters (tcpdump), af_packet (quic acceleration) and future kcm can use it. tracing and tc cls/act program types still require root permissions, since tracing actually needs to be able to see all kernel pointers and tc is for root only. For example, the following unprivileged socket filter program is allowed: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += skb->len; return 0; } but the following program is not: int bpf_prog1(struct __sk_buff *skb) { u32 index = load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)); u64 *value = bpf_map_lookup_elem(&my_map, &index); if (value) *value += (u64) skb; return 0; } since it would leak the kernel address into the map. Unprivileged socket filter bpf programs have access to the following helper functions: - map lookup/update/delete (but they cannot store kernel pointers into them) - get_random (it's already exposed to unprivileged user space) - get_smp_processor_id - tail_call into another socket filter program - ktime_get_ns The feature is controlled by sysctl kernel.unprivileged_bpf_disabled. This toggle defaults to off (0), but can be set true (1). Once true, bpf programs and maps cannot be accessed from unprivileged process, and the toggle cannot be set back to false. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 05:23:21 +00:00
return -EACCES;
}
err = check_return_code(env);
if (err)
return err;
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
process_bpf_exit:
err = pop_stack(env, &prev_insn_idx, &insn_idx);
if (err < 0) {
if (err != -ENOENT)
return err;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
break;
} else {
do_print_state = true;
continue;
}
} else {
err = check_cond_jmp_op(env, insn, &insn_idx);
if (err)
return err;
}
} else if (class == BPF_LD) {
u8 mode = BPF_MODE(insn->code);
if (mode == BPF_ABS || mode == BPF_IND) {
err = check_ld_abs(env, insn);
if (err)
return err;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
} else if (mode == BPF_IMM) {
err = check_ld_imm(env, insn);
if (err)
return err;
insn_idx++;
env->insn_aux_data[insn_idx].seen = true;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
} else {
verbose(env, "invalid BPF_LD mode\n");
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
} else {
verbose(env, "unknown insn class %d\n", class);
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return -EINVAL;
}
insn_idx++;
}
bpf: introduce function calls (verification) Allow arbitrary function calls from bpf function to another bpf function. To recognize such set of bpf functions the verifier does: 1. runs control flow analysis to detect function boundaries 2. proceeds with verification of all functions starting from main(root) function It recognizes that the stack of the caller can be accessed by the callee (if the caller passed a pointer to its stack to the callee) and the callee can store map_value and other pointers into the stack of the caller. 3. keeps track of the stack_depth of each function to make sure that total stack depth is still less than 512 bytes 4. disallows pointers to the callee stack to be stored into the caller stack, since they will be invalid as soon as the callee returns 5. to reuse all of the existing state_pruning logic each function call is considered to be independent call from the verifier point of view. The verifier pretends to inline all function calls it sees are being called. It stores the callsite instruction index as part of the state to make sure that two calls to the same callee from two different places in the caller will be different from state pruning point of view 6. more safety checks are added to liveness analysis Implementation details: . struct bpf_verifier_state is now consists of all stack frames that led to this function . struct bpf_func_state represent one stack frame. It consists of registers in the given frame and its stack . propagate_liveness() logic had a premature optimization where mark_reg_read() and mark_stack_slot_read() were manually inlined with loop iterating over parents for each register or stack slot. Undo this optimization to reuse more complex mark_*_read() logic . skip_callee() logic is not necessary from safety point of view, but without it mark_*_read() markings become too conservative, since after returning from the funciton call a read of r6-r9 will incorrectly propagate the read marks into callee causing inefficient pruning later . mark_*_read() logic is now aware of control flow which makes it more complex. In the future the plan is to rewrite liveness to be hierarchical. So that liveness can be done within basic block only and control flow will be responsible for propagation of liveness information along cfg and between calls. . tail_calls and ld_abs insns are not allowed in the programs with bpf-to-bpf calls . returning stack pointers to the caller or storing them into stack frame of the caller is not allowed Testing: . no difference in cilium processed_insn numbers . large number of tests follows in next patches Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:06 +00:00
verbose(env, "processed %d insns, stack depth ", insn_processed);
for (i = 0; i < env->subprog_cnt + 1; i++) {
u32 depth = env->subprog_stack_depth[i];
verbose(env, "%d", depth);
if (i + 1 < env->subprog_cnt + 1)
verbose(env, "+");
}
verbose(env, "\n");
env->prog->aux->stack_depth = env->subprog_stack_depth[0];
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
return 0;
}
bpf: Add array of maps support This patch adds a few helper funcs to enable map-in-map support (i.e. outer_map->inner_map). The first outer_map type BPF_MAP_TYPE_ARRAY_OF_MAPS is also added in this patch. The next patch will introduce a hash of maps type. Any bpf map type can be acted as an inner_map. The exception is BPF_MAP_TYPE_PROG_ARRAY because the extra level of indirection makes it harder to verify the owner_prog_type and owner_jited. Multi-level map-in-map is not supported (i.e. map->map is ok but not map->map->map). When adding an inner_map to an outer_map, it currently checks the map_type, key_size, value_size, map_flags, max_entries and ops. The verifier also uses those map's properties to do static analysis. map_flags is needed because we need to ensure BPF_PROG_TYPE_PERF_EVENT is using a preallocated hashtab for the inner_hash also. ops and max_entries are needed to generate inlined map-lookup instructions. For simplicity reason, a simple '==' test is used for both map_flags and max_entries. The equality of ops is implied by the equality of map_type. During outer_map creation time, an inner_map_fd is needed to create an outer_map. However, the inner_map_fd's life time does not depend on the outer_map. The inner_map_fd is merely used to initialize the inner_map_meta of the outer_map. Also, for the outer_map: * It allows element update and delete from syscall * It allows element lookup from bpf_prog The above is similar to the current fd_array pattern. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 17:00:33 +00:00
static int check_map_prealloc(struct bpf_map *map)
{
return (map->map_type != BPF_MAP_TYPE_HASH &&
map->map_type != BPF_MAP_TYPE_PERCPU_HASH &&
map->map_type != BPF_MAP_TYPE_HASH_OF_MAPS) ||
bpf: Add array of maps support This patch adds a few helper funcs to enable map-in-map support (i.e. outer_map->inner_map). The first outer_map type BPF_MAP_TYPE_ARRAY_OF_MAPS is also added in this patch. The next patch will introduce a hash of maps type. Any bpf map type can be acted as an inner_map. The exception is BPF_MAP_TYPE_PROG_ARRAY because the extra level of indirection makes it harder to verify the owner_prog_type and owner_jited. Multi-level map-in-map is not supported (i.e. map->map is ok but not map->map->map). When adding an inner_map to an outer_map, it currently checks the map_type, key_size, value_size, map_flags, max_entries and ops. The verifier also uses those map's properties to do static analysis. map_flags is needed because we need to ensure BPF_PROG_TYPE_PERF_EVENT is using a preallocated hashtab for the inner_hash also. ops and max_entries are needed to generate inlined map-lookup instructions. For simplicity reason, a simple '==' test is used for both map_flags and max_entries. The equality of ops is implied by the equality of map_type. During outer_map creation time, an inner_map_fd is needed to create an outer_map. However, the inner_map_fd's life time does not depend on the outer_map. The inner_map_fd is merely used to initialize the inner_map_meta of the outer_map. Also, for the outer_map: * It allows element update and delete from syscall * It allows element lookup from bpf_prog The above is similar to the current fd_array pattern. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 17:00:33 +00:00
!(map->map_flags & BPF_F_NO_PREALLOC);
}
static int check_map_prog_compatibility(struct bpf_verifier_env *env,
struct bpf_map *map,
struct bpf_prog *prog)
{
bpf: Add array of maps support This patch adds a few helper funcs to enable map-in-map support (i.e. outer_map->inner_map). The first outer_map type BPF_MAP_TYPE_ARRAY_OF_MAPS is also added in this patch. The next patch will introduce a hash of maps type. Any bpf map type can be acted as an inner_map. The exception is BPF_MAP_TYPE_PROG_ARRAY because the extra level of indirection makes it harder to verify the owner_prog_type and owner_jited. Multi-level map-in-map is not supported (i.e. map->map is ok but not map->map->map). When adding an inner_map to an outer_map, it currently checks the map_type, key_size, value_size, map_flags, max_entries and ops. The verifier also uses those map's properties to do static analysis. map_flags is needed because we need to ensure BPF_PROG_TYPE_PERF_EVENT is using a preallocated hashtab for the inner_hash also. ops and max_entries are needed to generate inlined map-lookup instructions. For simplicity reason, a simple '==' test is used for both map_flags and max_entries. The equality of ops is implied by the equality of map_type. During outer_map creation time, an inner_map_fd is needed to create an outer_map. However, the inner_map_fd's life time does not depend on the outer_map. The inner_map_fd is merely used to initialize the inner_map_meta of the outer_map. Also, for the outer_map: * It allows element update and delete from syscall * It allows element lookup from bpf_prog The above is similar to the current fd_array pattern. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 17:00:33 +00:00
/* Make sure that BPF_PROG_TYPE_PERF_EVENT programs only use
* preallocated hash maps, since doing memory allocation
* in overflow_handler can crash depending on where nmi got
* triggered.
*/
if (prog->type == BPF_PROG_TYPE_PERF_EVENT) {
if (!check_map_prealloc(map)) {
verbose(env, "perf_event programs can only use preallocated hash map\n");
bpf: Add array of maps support This patch adds a few helper funcs to enable map-in-map support (i.e. outer_map->inner_map). The first outer_map type BPF_MAP_TYPE_ARRAY_OF_MAPS is also added in this patch. The next patch will introduce a hash of maps type. Any bpf map type can be acted as an inner_map. The exception is BPF_MAP_TYPE_PROG_ARRAY because the extra level of indirection makes it harder to verify the owner_prog_type and owner_jited. Multi-level map-in-map is not supported (i.e. map->map is ok but not map->map->map). When adding an inner_map to an outer_map, it currently checks the map_type, key_size, value_size, map_flags, max_entries and ops. The verifier also uses those map's properties to do static analysis. map_flags is needed because we need to ensure BPF_PROG_TYPE_PERF_EVENT is using a preallocated hashtab for the inner_hash also. ops and max_entries are needed to generate inlined map-lookup instructions. For simplicity reason, a simple '==' test is used for both map_flags and max_entries. The equality of ops is implied by the equality of map_type. During outer_map creation time, an inner_map_fd is needed to create an outer_map. However, the inner_map_fd's life time does not depend on the outer_map. The inner_map_fd is merely used to initialize the inner_map_meta of the outer_map. Also, for the outer_map: * It allows element update and delete from syscall * It allows element lookup from bpf_prog The above is similar to the current fd_array pattern. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 17:00:33 +00:00
return -EINVAL;
}
if (map->inner_map_meta &&
!check_map_prealloc(map->inner_map_meta)) {
verbose(env, "perf_event programs can only use preallocated inner hash map\n");
bpf: Add array of maps support This patch adds a few helper funcs to enable map-in-map support (i.e. outer_map->inner_map). The first outer_map type BPF_MAP_TYPE_ARRAY_OF_MAPS is also added in this patch. The next patch will introduce a hash of maps type. Any bpf map type can be acted as an inner_map. The exception is BPF_MAP_TYPE_PROG_ARRAY because the extra level of indirection makes it harder to verify the owner_prog_type and owner_jited. Multi-level map-in-map is not supported (i.e. map->map is ok but not map->map->map). When adding an inner_map to an outer_map, it currently checks the map_type, key_size, value_size, map_flags, max_entries and ops. The verifier also uses those map's properties to do static analysis. map_flags is needed because we need to ensure BPF_PROG_TYPE_PERF_EVENT is using a preallocated hashtab for the inner_hash also. ops and max_entries are needed to generate inlined map-lookup instructions. For simplicity reason, a simple '==' test is used for both map_flags and max_entries. The equality of ops is implied by the equality of map_type. During outer_map creation time, an inner_map_fd is needed to create an outer_map. However, the inner_map_fd's life time does not depend on the outer_map. The inner_map_fd is merely used to initialize the inner_map_meta of the outer_map. Also, for the outer_map: * It allows element update and delete from syscall * It allows element lookup from bpf_prog The above is similar to the current fd_array pattern. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22 17:00:33 +00:00
return -EINVAL;
}
}
if ((bpf_prog_is_dev_bound(prog->aux) || bpf_map_is_dev_bound(map)) &&
!bpf_offload_dev_match(prog, map)) {
verbose(env, "offload device mismatch between prog and map\n");
return -EINVAL;
}
return 0;
}
/* look for pseudo eBPF instructions that access map FDs and
* replace them with actual map pointers
*/
static int replace_map_fd_with_map_ptr(struct bpf_verifier_env *env)
{
struct bpf_insn *insn = env->prog->insnsi;
int insn_cnt = env->prog->len;
int i, j, err;
bpf: rework prog_digest into prog_tag Commit 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") was recently discussed, partially due to admittedly suboptimal name of "prog_digest" in combination with sha1 hash usage, thus inevitably and rightfully concerns about its security in terms of collision resistance were raised with regards to use-cases. The intended use cases are for debugging resp. introspection only for providing a stable "tag" over the instruction sequence that both kernel and user space can calculate independently. It's not usable at all for making a security relevant decision. So collisions where two different instruction sequences generate the same tag can happen, but ideally at a rather low rate. The "tag" will be dumped in hex and is short enough to introspect in tracepoints or kallsyms output along with other data such as stack trace, etc. Thus, this patch performs a rename into prog_tag and truncates the tag to a short output (64 bits) to make it obvious it's not collision-free. Should in future a hash or facility be needed with a security relevant focus, then we can think about requirements, constraints, etc that would fit to that situation. For now, rework the exposed parts for the current use cases as long as nothing has been released yet. Tested on x86_64 and s390x. Fixes: 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-13 22:38:15 +00:00
err = bpf_prog_calc_tag(env->prog);
if (err)
return err;
for (i = 0; i < insn_cnt; i++, insn++) {
if (BPF_CLASS(insn->code) == BPF_LDX &&
(BPF_MODE(insn->code) != BPF_MEM || insn->imm != 0)) {
verbose(env, "BPF_LDX uses reserved fields\n");
return -EINVAL;
}
if (BPF_CLASS(insn->code) == BPF_STX &&
((BPF_MODE(insn->code) != BPF_MEM &&
BPF_MODE(insn->code) != BPF_XADD) || insn->imm != 0)) {
verbose(env, "BPF_STX uses reserved fields\n");
return -EINVAL;
}
if (insn[0].code == (BPF_LD | BPF_IMM | BPF_DW)) {
struct bpf_map *map;
struct fd f;
if (i == insn_cnt - 1 || insn[1].code != 0 ||
insn[1].dst_reg != 0 || insn[1].src_reg != 0 ||
insn[1].off != 0) {
verbose(env, "invalid bpf_ld_imm64 insn\n");
return -EINVAL;
}
if (insn->src_reg == 0)
/* valid generic load 64-bit imm */
goto next_insn;
if (insn->src_reg != BPF_PSEUDO_MAP_FD) {
verbose(env,
"unrecognized bpf_ld_imm64 insn\n");
return -EINVAL;
}
f = fdget(insn->imm);
map = __bpf_map_get(f);
if (IS_ERR(map)) {
verbose(env, "fd %d is not pointing to valid bpf_map\n",
insn->imm);
return PTR_ERR(map);
}
err = check_map_prog_compatibility(env, map, env->prog);
if (err) {
fdput(f);
return err;
}
/* store map pointer inside BPF_LD_IMM64 instruction */
insn[0].imm = (u32) (unsigned long) map;
insn[1].imm = ((u64) (unsigned long) map) >> 32;
/* check whether we recorded this map already */
for (j = 0; j < env->used_map_cnt; j++)
if (env->used_maps[j] == map) {
fdput(f);
goto next_insn;
}
if (env->used_map_cnt >= MAX_USED_MAPS) {
fdput(f);
return -E2BIG;
}
/* hold the map. If the program is rejected by verifier,
* the map will be released by release_maps() or it
* will be used by the valid program until it's unloaded
* and all maps are released in free_bpf_prog_info()
*/
map = bpf_map_inc(map, false);
if (IS_ERR(map)) {
fdput(f);
return PTR_ERR(map);
}
env->used_maps[env->used_map_cnt++] = map;
fdput(f);
next_insn:
insn++;
i++;
}
}
/* now all pseudo BPF_LD_IMM64 instructions load valid
* 'struct bpf_map *' into a register instead of user map_fd.
* These pointers will be used later by verifier to validate map access.
*/
return 0;
}
/* drop refcnt of maps used by the rejected program */
static void release_maps(struct bpf_verifier_env *env)
{
int i;
for (i = 0; i < env->used_map_cnt; i++)
bpf_map_put(env->used_maps[i]);
}
/* convert pseudo BPF_LD_IMM64 into generic BPF_LD_IMM64 */
static void convert_pseudo_ld_imm64(struct bpf_verifier_env *env)
{
struct bpf_insn *insn = env->prog->insnsi;
int insn_cnt = env->prog->len;
int i;
for (i = 0; i < insn_cnt; i++, insn++)
if (insn->code == (BPF_LD | BPF_IMM | BPF_DW))
insn->src_reg = 0;
}
/* single env->prog->insni[off] instruction was replaced with the range
* insni[off, off + cnt). Adjust corresponding insn_aux_data by copying
* [0, off) and [off, end) to new locations, so the patched range stays zero
*/
static int adjust_insn_aux_data(struct bpf_verifier_env *env, u32 prog_len,
u32 off, u32 cnt)
{
struct bpf_insn_aux_data *new_data, *old_data = env->insn_aux_data;
int i;
if (cnt == 1)
return 0;
new_data = vzalloc(sizeof(struct bpf_insn_aux_data) * prog_len);
if (!new_data)
return -ENOMEM;
memcpy(new_data, old_data, sizeof(struct bpf_insn_aux_data) * off);
memcpy(new_data + off + cnt - 1, old_data + off,
sizeof(struct bpf_insn_aux_data) * (prog_len - off - cnt + 1));
for (i = off; i < off + cnt - 1; i++)
new_data[i].seen = true;
env->insn_aux_data = new_data;
vfree(old_data);
return 0;
}
bpf: introduce function calls (function boundaries) Allow arbitrary function calls from bpf function to another bpf function. Since the beginning of bpf all bpf programs were represented as a single function and program authors were forced to use always_inline for all functions in their C code. That was causing llvm to unnecessary inflate the code size and forcing developers to move code to header files with little code reuse. With a bit of additional complexity teach verifier to recognize arbitrary function calls from one bpf function to another as long as all of functions are presented to the verifier as a single bpf program. New program layout: r6 = r1 // some code .. r1 = .. // arg1 r2 = .. // arg2 call pc+1 // function call pc-relative exit .. = r1 // access arg1 .. = r2 // access arg2 .. call pc+20 // second level of function call ... It allows for better optimized code and finally allows to introduce the core bpf libraries that can be reused in different projects, since programs are no longer limited by single elf file. With function calls bpf can be compiled into multiple .o files. This patch is the first step. It detects programs that contain multiple functions and checks that calls between them are valid. It splits the sequence of bpf instructions (one program) into a set of bpf functions that call each other. Calls to only known functions are allowed. In the future the verifier may allow calls to unresolved functions and will do dynamic linking. This logic supports statically linked bpf functions only. Such function boundary detection could have been done as part of control flow graph building in check_cfg(), but it's cleaner to separate function boundary detection vs control flow checks within a subprogram (function) into logically indepedent steps. Follow up patches may split check_cfg() further, but not check_subprogs(). Only allow bpf-to-bpf calls for root only and for non-hw-offloaded programs. These restrictions can be relaxed in the future. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:05 +00:00
static void adjust_subprog_starts(struct bpf_verifier_env *env, u32 off, u32 len)
{
int i;
if (len == 1)
return;
for (i = 0; i < env->subprog_cnt; i++) {
if (env->subprog_starts[i] < off)
continue;
env->subprog_starts[i] += len - 1;
}
}
static struct bpf_prog *bpf_patch_insn_data(struct bpf_verifier_env *env, u32 off,
const struct bpf_insn *patch, u32 len)
{
struct bpf_prog *new_prog;
new_prog = bpf_patch_insn_single(env->prog, off, patch, len);
if (!new_prog)
return NULL;
if (adjust_insn_aux_data(env, new_prog->len, off, len))
return NULL;
bpf: introduce function calls (function boundaries) Allow arbitrary function calls from bpf function to another bpf function. Since the beginning of bpf all bpf programs were represented as a single function and program authors were forced to use always_inline for all functions in their C code. That was causing llvm to unnecessary inflate the code size and forcing developers to move code to header files with little code reuse. With a bit of additional complexity teach verifier to recognize arbitrary function calls from one bpf function to another as long as all of functions are presented to the verifier as a single bpf program. New program layout: r6 = r1 // some code .. r1 = .. // arg1 r2 = .. // arg2 call pc+1 // function call pc-relative exit .. = r1 // access arg1 .. = r2 // access arg2 .. call pc+20 // second level of function call ... It allows for better optimized code and finally allows to introduce the core bpf libraries that can be reused in different projects, since programs are no longer limited by single elf file. With function calls bpf can be compiled into multiple .o files. This patch is the first step. It detects programs that contain multiple functions and checks that calls between them are valid. It splits the sequence of bpf instructions (one program) into a set of bpf functions that call each other. Calls to only known functions are allowed. In the future the verifier may allow calls to unresolved functions and will do dynamic linking. This logic supports statically linked bpf functions only. Such function boundary detection could have been done as part of control flow graph building in check_cfg(), but it's cleaner to separate function boundary detection vs control flow checks within a subprogram (function) into logically indepedent steps. Follow up patches may split check_cfg() further, but not check_subprogs(). Only allow bpf-to-bpf calls for root only and for non-hw-offloaded programs. These restrictions can be relaxed in the future. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:05 +00:00
adjust_subprog_starts(env, off, len);
return new_prog;
}
/* The verifier does more data flow analysis than llvm and will not explore
* branches that are dead at run time. Malicious programs can have dead code
* too. Therefore replace all dead at-run-time code with nops.
*/
static void sanitize_dead_code(struct bpf_verifier_env *env)
{
struct bpf_insn_aux_data *aux_data = env->insn_aux_data;
struct bpf_insn nop = BPF_MOV64_REG(BPF_REG_0, BPF_REG_0);
struct bpf_insn *insn = env->prog->insnsi;
const int insn_cnt = env->prog->len;
int i;
for (i = 0; i < insn_cnt; i++) {
if (aux_data[i].seen)
continue;
memcpy(insn + i, &nop, sizeof(nop));
}
}
/* convert load instructions that access fields of 'struct __sk_buff'
* into sequence of instructions that access fields of 'struct sk_buff'
*/
static int convert_ctx_accesses(struct bpf_verifier_env *env)
{
const struct bpf_verifier_ops *ops = env->ops;
bpf: simplify narrower ctx access This work tries to make the semantics and code around the narrower ctx access a bit easier to follow. Right now everything is done inside the .is_valid_access(). Offset matching is done differently for read/write types, meaning writes don't support narrower access and thus matching only on offsetof(struct foo, bar) is enough whereas for read case that supports narrower access we must check for offsetof(struct foo, bar) + offsetof(struct foo, bar) + sizeof(<bar>) - 1 for each of the cases. For read cases of individual members that don't support narrower access (like packet pointers or skb->cb[] case which has its own narrow access logic), we check as usual only offsetof(struct foo, bar) like in write case. Then, for the case where narrower access is allowed, we also need to set the aux info for the access. Meaning, ctx_field_size and converted_op_size have to be set. First is the original field size e.g. sizeof(<bar>) as in above example from the user facing ctx, and latter one is the target size after actual rewrite happened, thus for the kernel facing ctx. Also here we need the range match and we need to keep track changing convert_ctx_access() and converted_op_size from is_valid_access() as both are not at the same location. We can simplify the code a bit: check_ctx_access() becomes simpler in that we only store ctx_field_size as a meta data and later in convert_ctx_accesses() we fetch the target_size right from the location where we do convert. Should the verifier be misconfigured we do reject for BPF_WRITE cases or target_size that are not provided. For the subsystems, we always work on ranges in is_valid_access() and add small helpers for ranges and narrow access, convert_ctx_accesses() sets target_size for the relevant instruction. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-02 00:13:27 +00:00
int i, cnt, size, ctx_field_size, delta = 0;
const int insn_cnt = env->prog->len;
bpf: direct packet write and access for helpers for clsact progs This work implements direct packet access for helpers and direct packet write in a similar fashion as already available for XDP types via commits 4acf6c0b84c9 ("bpf: enable direct packet data write for xdp progs") and 6841de8b0d03 ("bpf: allow helpers access the packet directly"), and as a complementary feature to the already available direct packet read for tc (cls/act) programs. For enabling this, we need to introduce two helpers, bpf_skb_pull_data() and bpf_csum_update(). The first is generally needed for both, read and write, because they would otherwise only be limited to the current linear skb head. Usually, when the data_end test fails, programs just bail out, or, in the direct read case, use bpf_skb_load_bytes() as an alternative to overcome this limitation. If such data sits in non-linear parts, we can just pull them in once with the new helper, retest and eventually access them. At the same time, this also makes sure the skb is uncloned, which is, of course, a necessary condition for direct write. As this needs to be an invariant for the write part only, the verifier detects writes and adds a prologue that is calling bpf_skb_pull_data() to effectively unclone the skb from the very beginning in case it is indeed cloned. The heuristic makes use of a similar trick that was done in 233577a22089 ("net: filter: constify detection of pkt_type_offset"). This comes at zero cost for other programs that do not use the direct write feature. Should a program use this feature only sparsely and has read access for the most parts with, for example, drop return codes, then such write action can be delegated to a tail called program for mitigating this cost of potential uncloning to a late point in time where it would have been paid similarly with the bpf_skb_store_bytes() as well. Advantage of direct write is that the writes are inlined whereas the helper cannot make any length assumptions and thus needs to generate a call to memcpy() also for small sizes, as well as cost of helper call itself with sanity checks are avoided. Plus, when direct read is already used, we don't need to cache or perform rechecks on the data boundaries (due to verifier invalidating previous checks for helpers that change skb->data), so more complex programs using rewrites can benefit from switching to direct read plus write. For direct packet access to helpers, we save the otherwise needed copy into a temp struct sitting on stack memory when use-case allows. Both facilities are enabled via may_access_direct_pkt_data() in verifier. For now, we limit this to map helpers and csum_diff, and can successively enable other helpers where we find it makes sense. Helpers that definitely cannot be allowed for this are those part of bpf_helper_changes_skb_data() since they can change underlying data, and those that write into memory as this could happen for packet typed args when still cloned. bpf_csum_update() helper accommodates for the fact that we need to fixup checksum_complete when using direct write instead of bpf_skb_store_bytes(), meaning the programs can use available helpers like bpf_csum_diff(), and implement csum_add(), csum_sub(), csum_block_add(), csum_block_sub() equivalents in eBPF together with the new helper. A usage example will be provided for iproute2's examples/bpf/ directory. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 22:26:13 +00:00
struct bpf_insn insn_buf[16], *insn;
struct bpf_prog *new_prog;
enum bpf_access_type type;
bpf: simplify narrower ctx access This work tries to make the semantics and code around the narrower ctx access a bit easier to follow. Right now everything is done inside the .is_valid_access(). Offset matching is done differently for read/write types, meaning writes don't support narrower access and thus matching only on offsetof(struct foo, bar) is enough whereas for read case that supports narrower access we must check for offsetof(struct foo, bar) + offsetof(struct foo, bar) + sizeof(<bar>) - 1 for each of the cases. For read cases of individual members that don't support narrower access (like packet pointers or skb->cb[] case which has its own narrow access logic), we check as usual only offsetof(struct foo, bar) like in write case. Then, for the case where narrower access is allowed, we also need to set the aux info for the access. Meaning, ctx_field_size and converted_op_size have to be set. First is the original field size e.g. sizeof(<bar>) as in above example from the user facing ctx, and latter one is the target size after actual rewrite happened, thus for the kernel facing ctx. Also here we need the range match and we need to keep track changing convert_ctx_access() and converted_op_size from is_valid_access() as both are not at the same location. We can simplify the code a bit: check_ctx_access() becomes simpler in that we only store ctx_field_size as a meta data and later in convert_ctx_accesses() we fetch the target_size right from the location where we do convert. Should the verifier be misconfigured we do reject for BPF_WRITE cases or target_size that are not provided. For the subsystems, we always work on ranges in is_valid_access() and add small helpers for ranges and narrow access, convert_ctx_accesses() sets target_size for the relevant instruction. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-02 00:13:27 +00:00
bool is_narrower_load;
u32 target_size;
bpf: direct packet write and access for helpers for clsact progs This work implements direct packet access for helpers and direct packet write in a similar fashion as already available for XDP types via commits 4acf6c0b84c9 ("bpf: enable direct packet data write for xdp progs") and 6841de8b0d03 ("bpf: allow helpers access the packet directly"), and as a complementary feature to the already available direct packet read for tc (cls/act) programs. For enabling this, we need to introduce two helpers, bpf_skb_pull_data() and bpf_csum_update(). The first is generally needed for both, read and write, because they would otherwise only be limited to the current linear skb head. Usually, when the data_end test fails, programs just bail out, or, in the direct read case, use bpf_skb_load_bytes() as an alternative to overcome this limitation. If such data sits in non-linear parts, we can just pull them in once with the new helper, retest and eventually access them. At the same time, this also makes sure the skb is uncloned, which is, of course, a necessary condition for direct write. As this needs to be an invariant for the write part only, the verifier detects writes and adds a prologue that is calling bpf_skb_pull_data() to effectively unclone the skb from the very beginning in case it is indeed cloned. The heuristic makes use of a similar trick that was done in 233577a22089 ("net: filter: constify detection of pkt_type_offset"). This comes at zero cost for other programs that do not use the direct write feature. Should a program use this feature only sparsely and has read access for the most parts with, for example, drop return codes, then such write action can be delegated to a tail called program for mitigating this cost of potential uncloning to a late point in time where it would have been paid similarly with the bpf_skb_store_bytes() as well. Advantage of direct write is that the writes are inlined whereas the helper cannot make any length assumptions and thus needs to generate a call to memcpy() also for small sizes, as well as cost of helper call itself with sanity checks are avoided. Plus, when direct read is already used, we don't need to cache or perform rechecks on the data boundaries (due to verifier invalidating previous checks for helpers that change skb->data), so more complex programs using rewrites can benefit from switching to direct read plus write. For direct packet access to helpers, we save the otherwise needed copy into a temp struct sitting on stack memory when use-case allows. Both facilities are enabled via may_access_direct_pkt_data() in verifier. For now, we limit this to map helpers and csum_diff, and can successively enable other helpers where we find it makes sense. Helpers that definitely cannot be allowed for this are those part of bpf_helper_changes_skb_data() since they can change underlying data, and those that write into memory as this could happen for packet typed args when still cloned. bpf_csum_update() helper accommodates for the fact that we need to fixup checksum_complete when using direct write instead of bpf_skb_store_bytes(), meaning the programs can use available helpers like bpf_csum_diff(), and implement csum_add(), csum_sub(), csum_block_add(), csum_block_sub() equivalents in eBPF together with the new helper. A usage example will be provided for iproute2's examples/bpf/ directory. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 22:26:13 +00:00
if (ops->gen_prologue) {
cnt = ops->gen_prologue(insn_buf, env->seen_direct_write,
env->prog);
if (cnt >= ARRAY_SIZE(insn_buf)) {
verbose(env, "bpf verifier is misconfigured\n");
bpf: direct packet write and access for helpers for clsact progs This work implements direct packet access for helpers and direct packet write in a similar fashion as already available for XDP types via commits 4acf6c0b84c9 ("bpf: enable direct packet data write for xdp progs") and 6841de8b0d03 ("bpf: allow helpers access the packet directly"), and as a complementary feature to the already available direct packet read for tc (cls/act) programs. For enabling this, we need to introduce two helpers, bpf_skb_pull_data() and bpf_csum_update(). The first is generally needed for both, read and write, because they would otherwise only be limited to the current linear skb head. Usually, when the data_end test fails, programs just bail out, or, in the direct read case, use bpf_skb_load_bytes() as an alternative to overcome this limitation. If such data sits in non-linear parts, we can just pull them in once with the new helper, retest and eventually access them. At the same time, this also makes sure the skb is uncloned, which is, of course, a necessary condition for direct write. As this needs to be an invariant for the write part only, the verifier detects writes and adds a prologue that is calling bpf_skb_pull_data() to effectively unclone the skb from the very beginning in case it is indeed cloned. The heuristic makes use of a similar trick that was done in 233577a22089 ("net: filter: constify detection of pkt_type_offset"). This comes at zero cost for other programs that do not use the direct write feature. Should a program use this feature only sparsely and has read access for the most parts with, for example, drop return codes, then such write action can be delegated to a tail called program for mitigating this cost of potential uncloning to a late point in time where it would have been paid similarly with the bpf_skb_store_bytes() as well. Advantage of direct write is that the writes are inlined whereas the helper cannot make any length assumptions and thus needs to generate a call to memcpy() also for small sizes, as well as cost of helper call itself with sanity checks are avoided. Plus, when direct read is already used, we don't need to cache or perform rechecks on the data boundaries (due to verifier invalidating previous checks for helpers that change skb->data), so more complex programs using rewrites can benefit from switching to direct read plus write. For direct packet access to helpers, we save the otherwise needed copy into a temp struct sitting on stack memory when use-case allows. Both facilities are enabled via may_access_direct_pkt_data() in verifier. For now, we limit this to map helpers and csum_diff, and can successively enable other helpers where we find it makes sense. Helpers that definitely cannot be allowed for this are those part of bpf_helper_changes_skb_data() since they can change underlying data, and those that write into memory as this could happen for packet typed args when still cloned. bpf_csum_update() helper accommodates for the fact that we need to fixup checksum_complete when using direct write instead of bpf_skb_store_bytes(), meaning the programs can use available helpers like bpf_csum_diff(), and implement csum_add(), csum_sub(), csum_block_add(), csum_block_sub() equivalents in eBPF together with the new helper. A usage example will be provided for iproute2's examples/bpf/ directory. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 22:26:13 +00:00
return -EINVAL;
} else if (cnt) {
new_prog = bpf_patch_insn_data(env, 0, insn_buf, cnt);
bpf: direct packet write and access for helpers for clsact progs This work implements direct packet access for helpers and direct packet write in a similar fashion as already available for XDP types via commits 4acf6c0b84c9 ("bpf: enable direct packet data write for xdp progs") and 6841de8b0d03 ("bpf: allow helpers access the packet directly"), and as a complementary feature to the already available direct packet read for tc (cls/act) programs. For enabling this, we need to introduce two helpers, bpf_skb_pull_data() and bpf_csum_update(). The first is generally needed for both, read and write, because they would otherwise only be limited to the current linear skb head. Usually, when the data_end test fails, programs just bail out, or, in the direct read case, use bpf_skb_load_bytes() as an alternative to overcome this limitation. If such data sits in non-linear parts, we can just pull them in once with the new helper, retest and eventually access them. At the same time, this also makes sure the skb is uncloned, which is, of course, a necessary condition for direct write. As this needs to be an invariant for the write part only, the verifier detects writes and adds a prologue that is calling bpf_skb_pull_data() to effectively unclone the skb from the very beginning in case it is indeed cloned. The heuristic makes use of a similar trick that was done in 233577a22089 ("net: filter: constify detection of pkt_type_offset"). This comes at zero cost for other programs that do not use the direct write feature. Should a program use this feature only sparsely and has read access for the most parts with, for example, drop return codes, then such write action can be delegated to a tail called program for mitigating this cost of potential uncloning to a late point in time where it would have been paid similarly with the bpf_skb_store_bytes() as well. Advantage of direct write is that the writes are inlined whereas the helper cannot make any length assumptions and thus needs to generate a call to memcpy() also for small sizes, as well as cost of helper call itself with sanity checks are avoided. Plus, when direct read is already used, we don't need to cache or perform rechecks on the data boundaries (due to verifier invalidating previous checks for helpers that change skb->data), so more complex programs using rewrites can benefit from switching to direct read plus write. For direct packet access to helpers, we save the otherwise needed copy into a temp struct sitting on stack memory when use-case allows. Both facilities are enabled via may_access_direct_pkt_data() in verifier. For now, we limit this to map helpers and csum_diff, and can successively enable other helpers where we find it makes sense. Helpers that definitely cannot be allowed for this are those part of bpf_helper_changes_skb_data() since they can change underlying data, and those that write into memory as this could happen for packet typed args when still cloned. bpf_csum_update() helper accommodates for the fact that we need to fixup checksum_complete when using direct write instead of bpf_skb_store_bytes(), meaning the programs can use available helpers like bpf_csum_diff(), and implement csum_add(), csum_sub(), csum_block_add(), csum_block_sub() equivalents in eBPF together with the new helper. A usage example will be provided for iproute2's examples/bpf/ directory. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 22:26:13 +00:00
if (!new_prog)
return -ENOMEM;
bpf: direct packet write and access for helpers for clsact progs This work implements direct packet access for helpers and direct packet write in a similar fashion as already available for XDP types via commits 4acf6c0b84c9 ("bpf: enable direct packet data write for xdp progs") and 6841de8b0d03 ("bpf: allow helpers access the packet directly"), and as a complementary feature to the already available direct packet read for tc (cls/act) programs. For enabling this, we need to introduce two helpers, bpf_skb_pull_data() and bpf_csum_update(). The first is generally needed for both, read and write, because they would otherwise only be limited to the current linear skb head. Usually, when the data_end test fails, programs just bail out, or, in the direct read case, use bpf_skb_load_bytes() as an alternative to overcome this limitation. If such data sits in non-linear parts, we can just pull them in once with the new helper, retest and eventually access them. At the same time, this also makes sure the skb is uncloned, which is, of course, a necessary condition for direct write. As this needs to be an invariant for the write part only, the verifier detects writes and adds a prologue that is calling bpf_skb_pull_data() to effectively unclone the skb from the very beginning in case it is indeed cloned. The heuristic makes use of a similar trick that was done in 233577a22089 ("net: filter: constify detection of pkt_type_offset"). This comes at zero cost for other programs that do not use the direct write feature. Should a program use this feature only sparsely and has read access for the most parts with, for example, drop return codes, then such write action can be delegated to a tail called program for mitigating this cost of potential uncloning to a late point in time where it would have been paid similarly with the bpf_skb_store_bytes() as well. Advantage of direct write is that the writes are inlined whereas the helper cannot make any length assumptions and thus needs to generate a call to memcpy() also for small sizes, as well as cost of helper call itself with sanity checks are avoided. Plus, when direct read is already used, we don't need to cache or perform rechecks on the data boundaries (due to verifier invalidating previous checks for helpers that change skb->data), so more complex programs using rewrites can benefit from switching to direct read plus write. For direct packet access to helpers, we save the otherwise needed copy into a temp struct sitting on stack memory when use-case allows. Both facilities are enabled via may_access_direct_pkt_data() in verifier. For now, we limit this to map helpers and csum_diff, and can successively enable other helpers where we find it makes sense. Helpers that definitely cannot be allowed for this are those part of bpf_helper_changes_skb_data() since they can change underlying data, and those that write into memory as this could happen for packet typed args when still cloned. bpf_csum_update() helper accommodates for the fact that we need to fixup checksum_complete when using direct write instead of bpf_skb_store_bytes(), meaning the programs can use available helpers like bpf_csum_diff(), and implement csum_add(), csum_sub(), csum_block_add(), csum_block_sub() equivalents in eBPF together with the new helper. A usage example will be provided for iproute2's examples/bpf/ directory. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 22:26:13 +00:00
env->prog = new_prog;
delta += cnt - 1;
bpf: direct packet write and access for helpers for clsact progs This work implements direct packet access for helpers and direct packet write in a similar fashion as already available for XDP types via commits 4acf6c0b84c9 ("bpf: enable direct packet data write for xdp progs") and 6841de8b0d03 ("bpf: allow helpers access the packet directly"), and as a complementary feature to the already available direct packet read for tc (cls/act) programs. For enabling this, we need to introduce two helpers, bpf_skb_pull_data() and bpf_csum_update(). The first is generally needed for both, read and write, because they would otherwise only be limited to the current linear skb head. Usually, when the data_end test fails, programs just bail out, or, in the direct read case, use bpf_skb_load_bytes() as an alternative to overcome this limitation. If such data sits in non-linear parts, we can just pull them in once with the new helper, retest and eventually access them. At the same time, this also makes sure the skb is uncloned, which is, of course, a necessary condition for direct write. As this needs to be an invariant for the write part only, the verifier detects writes and adds a prologue that is calling bpf_skb_pull_data() to effectively unclone the skb from the very beginning in case it is indeed cloned. The heuristic makes use of a similar trick that was done in 233577a22089 ("net: filter: constify detection of pkt_type_offset"). This comes at zero cost for other programs that do not use the direct write feature. Should a program use this feature only sparsely and has read access for the most parts with, for example, drop return codes, then such write action can be delegated to a tail called program for mitigating this cost of potential uncloning to a late point in time where it would have been paid similarly with the bpf_skb_store_bytes() as well. Advantage of direct write is that the writes are inlined whereas the helper cannot make any length assumptions and thus needs to generate a call to memcpy() also for small sizes, as well as cost of helper call itself with sanity checks are avoided. Plus, when direct read is already used, we don't need to cache or perform rechecks on the data boundaries (due to verifier invalidating previous checks for helpers that change skb->data), so more complex programs using rewrites can benefit from switching to direct read plus write. For direct packet access to helpers, we save the otherwise needed copy into a temp struct sitting on stack memory when use-case allows. Both facilities are enabled via may_access_direct_pkt_data() in verifier. For now, we limit this to map helpers and csum_diff, and can successively enable other helpers where we find it makes sense. Helpers that definitely cannot be allowed for this are those part of bpf_helper_changes_skb_data() since they can change underlying data, and those that write into memory as this could happen for packet typed args when still cloned. bpf_csum_update() helper accommodates for the fact that we need to fixup checksum_complete when using direct write instead of bpf_skb_store_bytes(), meaning the programs can use available helpers like bpf_csum_diff(), and implement csum_add(), csum_sub(), csum_block_add(), csum_block_sub() equivalents in eBPF together with the new helper. A usage example will be provided for iproute2's examples/bpf/ directory. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 22:26:13 +00:00
}
}
if (!ops->convert_ctx_access)
return 0;
insn = env->prog->insnsi + delta;
bpf: direct packet write and access for helpers for clsact progs This work implements direct packet access for helpers and direct packet write in a similar fashion as already available for XDP types via commits 4acf6c0b84c9 ("bpf: enable direct packet data write for xdp progs") and 6841de8b0d03 ("bpf: allow helpers access the packet directly"), and as a complementary feature to the already available direct packet read for tc (cls/act) programs. For enabling this, we need to introduce two helpers, bpf_skb_pull_data() and bpf_csum_update(). The first is generally needed for both, read and write, because they would otherwise only be limited to the current linear skb head. Usually, when the data_end test fails, programs just bail out, or, in the direct read case, use bpf_skb_load_bytes() as an alternative to overcome this limitation. If such data sits in non-linear parts, we can just pull them in once with the new helper, retest and eventually access them. At the same time, this also makes sure the skb is uncloned, which is, of course, a necessary condition for direct write. As this needs to be an invariant for the write part only, the verifier detects writes and adds a prologue that is calling bpf_skb_pull_data() to effectively unclone the skb from the very beginning in case it is indeed cloned. The heuristic makes use of a similar trick that was done in 233577a22089 ("net: filter: constify detection of pkt_type_offset"). This comes at zero cost for other programs that do not use the direct write feature. Should a program use this feature only sparsely and has read access for the most parts with, for example, drop return codes, then such write action can be delegated to a tail called program for mitigating this cost of potential uncloning to a late point in time where it would have been paid similarly with the bpf_skb_store_bytes() as well. Advantage of direct write is that the writes are inlined whereas the helper cannot make any length assumptions and thus needs to generate a call to memcpy() also for small sizes, as well as cost of helper call itself with sanity checks are avoided. Plus, when direct read is already used, we don't need to cache or perform rechecks on the data boundaries (due to verifier invalidating previous checks for helpers that change skb->data), so more complex programs using rewrites can benefit from switching to direct read plus write. For direct packet access to helpers, we save the otherwise needed copy into a temp struct sitting on stack memory when use-case allows. Both facilities are enabled via may_access_direct_pkt_data() in verifier. For now, we limit this to map helpers and csum_diff, and can successively enable other helpers where we find it makes sense. Helpers that definitely cannot be allowed for this are those part of bpf_helper_changes_skb_data() since they can change underlying data, and those that write into memory as this could happen for packet typed args when still cloned. bpf_csum_update() helper accommodates for the fact that we need to fixup checksum_complete when using direct write instead of bpf_skb_store_bytes(), meaning the programs can use available helpers like bpf_csum_diff(), and implement csum_add(), csum_sub(), csum_block_add(), csum_block_sub() equivalents in eBPF together with the new helper. A usage example will be provided for iproute2's examples/bpf/ directory. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 22:26:13 +00:00
for (i = 0; i < insn_cnt; i++, insn++) {
if (insn->code == (BPF_LDX | BPF_MEM | BPF_B) ||
insn->code == (BPF_LDX | BPF_MEM | BPF_H) ||
insn->code == (BPF_LDX | BPF_MEM | BPF_W) ||
insn->code == (BPF_LDX | BPF_MEM | BPF_DW))
type = BPF_READ;
else if (insn->code == (BPF_STX | BPF_MEM | BPF_B) ||
insn->code == (BPF_STX | BPF_MEM | BPF_H) ||
insn->code == (BPF_STX | BPF_MEM | BPF_W) ||
insn->code == (BPF_STX | BPF_MEM | BPF_DW))
type = BPF_WRITE;
else
continue;
if (env->insn_aux_data[i + delta].ptr_type != PTR_TO_CTX)
continue;
ctx_field_size = env->insn_aux_data[i + delta].ctx_field_size;
bpf: simplify narrower ctx access This work tries to make the semantics and code around the narrower ctx access a bit easier to follow. Right now everything is done inside the .is_valid_access(). Offset matching is done differently for read/write types, meaning writes don't support narrower access and thus matching only on offsetof(struct foo, bar) is enough whereas for read case that supports narrower access we must check for offsetof(struct foo, bar) + offsetof(struct foo, bar) + sizeof(<bar>) - 1 for each of the cases. For read cases of individual members that don't support narrower access (like packet pointers or skb->cb[] case which has its own narrow access logic), we check as usual only offsetof(struct foo, bar) like in write case. Then, for the case where narrower access is allowed, we also need to set the aux info for the access. Meaning, ctx_field_size and converted_op_size have to be set. First is the original field size e.g. sizeof(<bar>) as in above example from the user facing ctx, and latter one is the target size after actual rewrite happened, thus for the kernel facing ctx. Also here we need the range match and we need to keep track changing convert_ctx_access() and converted_op_size from is_valid_access() as both are not at the same location. We can simplify the code a bit: check_ctx_access() becomes simpler in that we only store ctx_field_size as a meta data and later in convert_ctx_accesses() we fetch the target_size right from the location where we do convert. Should the verifier be misconfigured we do reject for BPF_WRITE cases or target_size that are not provided. For the subsystems, we always work on ranges in is_valid_access() and add small helpers for ranges and narrow access, convert_ctx_accesses() sets target_size for the relevant instruction. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-02 00:13:27 +00:00
size = BPF_LDST_BYTES(insn);
/* If the read access is a narrower load of the field,
* convert to a 4/8-byte load, to minimum program type specific
* convert_ctx_access changes. If conversion is successful,
* we will apply proper mask to the result.
*/
bpf: simplify narrower ctx access This work tries to make the semantics and code around the narrower ctx access a bit easier to follow. Right now everything is done inside the .is_valid_access(). Offset matching is done differently for read/write types, meaning writes don't support narrower access and thus matching only on offsetof(struct foo, bar) is enough whereas for read case that supports narrower access we must check for offsetof(struct foo, bar) + offsetof(struct foo, bar) + sizeof(<bar>) - 1 for each of the cases. For read cases of individual members that don't support narrower access (like packet pointers or skb->cb[] case which has its own narrow access logic), we check as usual only offsetof(struct foo, bar) like in write case. Then, for the case where narrower access is allowed, we also need to set the aux info for the access. Meaning, ctx_field_size and converted_op_size have to be set. First is the original field size e.g. sizeof(<bar>) as in above example from the user facing ctx, and latter one is the target size after actual rewrite happened, thus for the kernel facing ctx. Also here we need the range match and we need to keep track changing convert_ctx_access() and converted_op_size from is_valid_access() as both are not at the same location. We can simplify the code a bit: check_ctx_access() becomes simpler in that we only store ctx_field_size as a meta data and later in convert_ctx_accesses() we fetch the target_size right from the location where we do convert. Should the verifier be misconfigured we do reject for BPF_WRITE cases or target_size that are not provided. For the subsystems, we always work on ranges in is_valid_access() and add small helpers for ranges and narrow access, convert_ctx_accesses() sets target_size for the relevant instruction. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-02 00:13:27 +00:00
is_narrower_load = size < ctx_field_size;
if (is_narrower_load) {
bpf: simplify narrower ctx access This work tries to make the semantics and code around the narrower ctx access a bit easier to follow. Right now everything is done inside the .is_valid_access(). Offset matching is done differently for read/write types, meaning writes don't support narrower access and thus matching only on offsetof(struct foo, bar) is enough whereas for read case that supports narrower access we must check for offsetof(struct foo, bar) + offsetof(struct foo, bar) + sizeof(<bar>) - 1 for each of the cases. For read cases of individual members that don't support narrower access (like packet pointers or skb->cb[] case which has its own narrow access logic), we check as usual only offsetof(struct foo, bar) like in write case. Then, for the case where narrower access is allowed, we also need to set the aux info for the access. Meaning, ctx_field_size and converted_op_size have to be set. First is the original field size e.g. sizeof(<bar>) as in above example from the user facing ctx, and latter one is the target size after actual rewrite happened, thus for the kernel facing ctx. Also here we need the range match and we need to keep track changing convert_ctx_access() and converted_op_size from is_valid_access() as both are not at the same location. We can simplify the code a bit: check_ctx_access() becomes simpler in that we only store ctx_field_size as a meta data and later in convert_ctx_accesses() we fetch the target_size right from the location where we do convert. Should the verifier be misconfigured we do reject for BPF_WRITE cases or target_size that are not provided. For the subsystems, we always work on ranges in is_valid_access() and add small helpers for ranges and narrow access, convert_ctx_accesses() sets target_size for the relevant instruction. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-02 00:13:27 +00:00
u32 off = insn->off;
u8 size_code;
if (type == BPF_WRITE) {
verbose(env, "bpf verifier narrow ctx access misconfigured\n");
bpf: simplify narrower ctx access This work tries to make the semantics and code around the narrower ctx access a bit easier to follow. Right now everything is done inside the .is_valid_access(). Offset matching is done differently for read/write types, meaning writes don't support narrower access and thus matching only on offsetof(struct foo, bar) is enough whereas for read case that supports narrower access we must check for offsetof(struct foo, bar) + offsetof(struct foo, bar) + sizeof(<bar>) - 1 for each of the cases. For read cases of individual members that don't support narrower access (like packet pointers or skb->cb[] case which has its own narrow access logic), we check as usual only offsetof(struct foo, bar) like in write case. Then, for the case where narrower access is allowed, we also need to set the aux info for the access. Meaning, ctx_field_size and converted_op_size have to be set. First is the original field size e.g. sizeof(<bar>) as in above example from the user facing ctx, and latter one is the target size after actual rewrite happened, thus for the kernel facing ctx. Also here we need the range match and we need to keep track changing convert_ctx_access() and converted_op_size from is_valid_access() as both are not at the same location. We can simplify the code a bit: check_ctx_access() becomes simpler in that we only store ctx_field_size as a meta data and later in convert_ctx_accesses() we fetch the target_size right from the location where we do convert. Should the verifier be misconfigured we do reject for BPF_WRITE cases or target_size that are not provided. For the subsystems, we always work on ranges in is_valid_access() and add small helpers for ranges and narrow access, convert_ctx_accesses() sets target_size for the relevant instruction. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-02 00:13:27 +00:00
return -EINVAL;
}
bpf: simplify narrower ctx access This work tries to make the semantics and code around the narrower ctx access a bit easier to follow. Right now everything is done inside the .is_valid_access(). Offset matching is done differently for read/write types, meaning writes don't support narrower access and thus matching only on offsetof(struct foo, bar) is enough whereas for read case that supports narrower access we must check for offsetof(struct foo, bar) + offsetof(struct foo, bar) + sizeof(<bar>) - 1 for each of the cases. For read cases of individual members that don't support narrower access (like packet pointers or skb->cb[] case which has its own narrow access logic), we check as usual only offsetof(struct foo, bar) like in write case. Then, for the case where narrower access is allowed, we also need to set the aux info for the access. Meaning, ctx_field_size and converted_op_size have to be set. First is the original field size e.g. sizeof(<bar>) as in above example from the user facing ctx, and latter one is the target size after actual rewrite happened, thus for the kernel facing ctx. Also here we need the range match and we need to keep track changing convert_ctx_access() and converted_op_size from is_valid_access() as both are not at the same location. We can simplify the code a bit: check_ctx_access() becomes simpler in that we only store ctx_field_size as a meta data and later in convert_ctx_accesses() we fetch the target_size right from the location where we do convert. Should the verifier be misconfigured we do reject for BPF_WRITE cases or target_size that are not provided. For the subsystems, we always work on ranges in is_valid_access() and add small helpers for ranges and narrow access, convert_ctx_accesses() sets target_size for the relevant instruction. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-02 00:13:27 +00:00
size_code = BPF_H;
if (ctx_field_size == 4)
size_code = BPF_W;
else if (ctx_field_size == 8)
size_code = BPF_DW;
bpf: simplify narrower ctx access This work tries to make the semantics and code around the narrower ctx access a bit easier to follow. Right now everything is done inside the .is_valid_access(). Offset matching is done differently for read/write types, meaning writes don't support narrower access and thus matching only on offsetof(struct foo, bar) is enough whereas for read case that supports narrower access we must check for offsetof(struct foo, bar) + offsetof(struct foo, bar) + sizeof(<bar>) - 1 for each of the cases. For read cases of individual members that don't support narrower access (like packet pointers or skb->cb[] case which has its own narrow access logic), we check as usual only offsetof(struct foo, bar) like in write case. Then, for the case where narrower access is allowed, we also need to set the aux info for the access. Meaning, ctx_field_size and converted_op_size have to be set. First is the original field size e.g. sizeof(<bar>) as in above example from the user facing ctx, and latter one is the target size after actual rewrite happened, thus for the kernel facing ctx. Also here we need the range match and we need to keep track changing convert_ctx_access() and converted_op_size from is_valid_access() as both are not at the same location. We can simplify the code a bit: check_ctx_access() becomes simpler in that we only store ctx_field_size as a meta data and later in convert_ctx_accesses() we fetch the target_size right from the location where we do convert. Should the verifier be misconfigured we do reject for BPF_WRITE cases or target_size that are not provided. For the subsystems, we always work on ranges in is_valid_access() and add small helpers for ranges and narrow access, convert_ctx_accesses() sets target_size for the relevant instruction. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-02 00:13:27 +00:00
insn->off = off & ~(ctx_field_size - 1);
insn->code = BPF_LDX | BPF_MEM | size_code;
}
bpf: simplify narrower ctx access This work tries to make the semantics and code around the narrower ctx access a bit easier to follow. Right now everything is done inside the .is_valid_access(). Offset matching is done differently for read/write types, meaning writes don't support narrower access and thus matching only on offsetof(struct foo, bar) is enough whereas for read case that supports narrower access we must check for offsetof(struct foo, bar) + offsetof(struct foo, bar) + sizeof(<bar>) - 1 for each of the cases. For read cases of individual members that don't support narrower access (like packet pointers or skb->cb[] case which has its own narrow access logic), we check as usual only offsetof(struct foo, bar) like in write case. Then, for the case where narrower access is allowed, we also need to set the aux info for the access. Meaning, ctx_field_size and converted_op_size have to be set. First is the original field size e.g. sizeof(<bar>) as in above example from the user facing ctx, and latter one is the target size after actual rewrite happened, thus for the kernel facing ctx. Also here we need the range match and we need to keep track changing convert_ctx_access() and converted_op_size from is_valid_access() as both are not at the same location. We can simplify the code a bit: check_ctx_access() becomes simpler in that we only store ctx_field_size as a meta data and later in convert_ctx_accesses() we fetch the target_size right from the location where we do convert. Should the verifier be misconfigured we do reject for BPF_WRITE cases or target_size that are not provided. For the subsystems, we always work on ranges in is_valid_access() and add small helpers for ranges and narrow access, convert_ctx_accesses() sets target_size for the relevant instruction. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-02 00:13:27 +00:00
target_size = 0;
cnt = ops->convert_ctx_access(type, insn, insn_buf, env->prog,
&target_size);
if (cnt == 0 || cnt >= ARRAY_SIZE(insn_buf) ||
(ctx_field_size && !target_size)) {
verbose(env, "bpf verifier is misconfigured\n");
return -EINVAL;
}
bpf: simplify narrower ctx access This work tries to make the semantics and code around the narrower ctx access a bit easier to follow. Right now everything is done inside the .is_valid_access(). Offset matching is done differently for read/write types, meaning writes don't support narrower access and thus matching only on offsetof(struct foo, bar) is enough whereas for read case that supports narrower access we must check for offsetof(struct foo, bar) + offsetof(struct foo, bar) + sizeof(<bar>) - 1 for each of the cases. For read cases of individual members that don't support narrower access (like packet pointers or skb->cb[] case which has its own narrow access logic), we check as usual only offsetof(struct foo, bar) like in write case. Then, for the case where narrower access is allowed, we also need to set the aux info for the access. Meaning, ctx_field_size and converted_op_size have to be set. First is the original field size e.g. sizeof(<bar>) as in above example from the user facing ctx, and latter one is the target size after actual rewrite happened, thus for the kernel facing ctx. Also here we need the range match and we need to keep track changing convert_ctx_access() and converted_op_size from is_valid_access() as both are not at the same location. We can simplify the code a bit: check_ctx_access() becomes simpler in that we only store ctx_field_size as a meta data and later in convert_ctx_accesses() we fetch the target_size right from the location where we do convert. Should the verifier be misconfigured we do reject for BPF_WRITE cases or target_size that are not provided. For the subsystems, we always work on ranges in is_valid_access() and add small helpers for ranges and narrow access, convert_ctx_accesses() sets target_size for the relevant instruction. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-02 00:13:27 +00:00
if (is_narrower_load && size < target_size) {
if (ctx_field_size <= 4)
insn_buf[cnt++] = BPF_ALU32_IMM(BPF_AND, insn->dst_reg,
bpf: simplify narrower ctx access This work tries to make the semantics and code around the narrower ctx access a bit easier to follow. Right now everything is done inside the .is_valid_access(). Offset matching is done differently for read/write types, meaning writes don't support narrower access and thus matching only on offsetof(struct foo, bar) is enough whereas for read case that supports narrower access we must check for offsetof(struct foo, bar) + offsetof(struct foo, bar) + sizeof(<bar>) - 1 for each of the cases. For read cases of individual members that don't support narrower access (like packet pointers or skb->cb[] case which has its own narrow access logic), we check as usual only offsetof(struct foo, bar) like in write case. Then, for the case where narrower access is allowed, we also need to set the aux info for the access. Meaning, ctx_field_size and converted_op_size have to be set. First is the original field size e.g. sizeof(<bar>) as in above example from the user facing ctx, and latter one is the target size after actual rewrite happened, thus for the kernel facing ctx. Also here we need the range match and we need to keep track changing convert_ctx_access() and converted_op_size from is_valid_access() as both are not at the same location. We can simplify the code a bit: check_ctx_access() becomes simpler in that we only store ctx_field_size as a meta data and later in convert_ctx_accesses() we fetch the target_size right from the location where we do convert. Should the verifier be misconfigured we do reject for BPF_WRITE cases or target_size that are not provided. For the subsystems, we always work on ranges in is_valid_access() and add small helpers for ranges and narrow access, convert_ctx_accesses() sets target_size for the relevant instruction. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-02 00:13:27 +00:00
(1 << size * 8) - 1);
else
insn_buf[cnt++] = BPF_ALU64_IMM(BPF_AND, insn->dst_reg,
bpf: simplify narrower ctx access This work tries to make the semantics and code around the narrower ctx access a bit easier to follow. Right now everything is done inside the .is_valid_access(). Offset matching is done differently for read/write types, meaning writes don't support narrower access and thus matching only on offsetof(struct foo, bar) is enough whereas for read case that supports narrower access we must check for offsetof(struct foo, bar) + offsetof(struct foo, bar) + sizeof(<bar>) - 1 for each of the cases. For read cases of individual members that don't support narrower access (like packet pointers or skb->cb[] case which has its own narrow access logic), we check as usual only offsetof(struct foo, bar) like in write case. Then, for the case where narrower access is allowed, we also need to set the aux info for the access. Meaning, ctx_field_size and converted_op_size have to be set. First is the original field size e.g. sizeof(<bar>) as in above example from the user facing ctx, and latter one is the target size after actual rewrite happened, thus for the kernel facing ctx. Also here we need the range match and we need to keep track changing convert_ctx_access() and converted_op_size from is_valid_access() as both are not at the same location. We can simplify the code a bit: check_ctx_access() becomes simpler in that we only store ctx_field_size as a meta data and later in convert_ctx_accesses() we fetch the target_size right from the location where we do convert. Should the verifier be misconfigured we do reject for BPF_WRITE cases or target_size that are not provided. For the subsystems, we always work on ranges in is_valid_access() and add small helpers for ranges and narrow access, convert_ctx_accesses() sets target_size for the relevant instruction. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-02 00:13:27 +00:00
(1 << size * 8) - 1);
}
new_prog = bpf_patch_insn_data(env, i + delta, insn_buf, cnt);
if (!new_prog)
return -ENOMEM;
delta += cnt - 1;
/* keep walking new program and skip insns we just inserted */
env->prog = new_prog;
insn = new_prog->insnsi + i + delta;
}
return 0;
}
bpf: x64: add JIT support for multi-function programs Typical JIT does several passes over bpf instructions to compute total size and relative offsets of jumps and calls. With multitple bpf functions calling each other all relative calls will have invalid offsets intially therefore we need to additional last pass over the program to emit calls with correct offsets. For example in case of three bpf functions: main: call foo call bpf_map_lookup exit foo: call bar exit bar: exit We will call bpf_int_jit_compile() indepedently for main(), foo() and bar() x64 JIT typically does 4-5 passes to converge. After these initial passes the image for these 3 functions will be good except call targets, since start addresses of foo() and bar() are unknown when we were JITing main() (note that call bpf_map_lookup will be resolved properly during initial passes). Once start addresses of 3 functions are known we patch call_insn->imm to point to right functions and call bpf_int_jit_compile() again which needs only one pass. Additional safety checks are done to make sure this last pass doesn't produce image that is larger or smaller than previous pass. When constant blinding is on it's applied to all functions at the first pass, since doing it once again at the last pass can change size of the JITed code. Tested on x64 and arm64 hw with JIT on/off, blinding on/off. x64 jits bpf-to-bpf calls correctly while arm64 falls back to interpreter. All other JITs that support normal BPF_CALL will behave the same way since bpf-to-bpf call is equivalent to bpf-to-kernel call from JITs point of view. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:15 +00:00
static int jit_subprogs(struct bpf_verifier_env *env)
{
struct bpf_prog *prog = env->prog, **func, *tmp;
int i, j, subprog_start, subprog_end = 0, len, subprog;
bpf: allow for correlation of maps and helpers in dump Currently a dump of an xlated prog (post verifier stage) doesn't correlate used helpers as well as maps. The prog info lists involved map ids, however there's no correlation of where in the program they are used as of today. Likewise, bpftool does not correlate helper calls with the target functions. The latter can be done w/o any kernel changes through kallsyms, and also has the advantage that this works with inlined helpers and BPF calls. Example, via interpreter: # tc filter show dev foo ingress filter protocol all pref 49152 bpf chain 0 filter protocol all pref 49152 bpf chain 0 handle 0x1 foo.o:[ingress] \ direct-action not_in_hw id 1 tag c74773051b364165 <-- prog id:1 * Output before patch (calls/maps remain unclear): # bpftool prog dump xlated id 1 <-- dump prog id:1 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = 0xffff95c47a8d4800 6: (85) call unknown#73040 7: (15) if r0 == 0x0 goto pc+18 8: (bf) r2 = r10 9: (07) r2 += -4 10: (bf) r1 = r0 11: (85) call unknown#73040 12: (15) if r0 == 0x0 goto pc+23 [...] * Output after patch: # bpftool prog dump xlated id 1 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] <-- map id:2 6: (85) call bpf_map_lookup_elem#73424 <-- helper call 7: (15) if r0 == 0x0 goto pc+18 8: (bf) r2 = r10 9: (07) r2 += -4 10: (bf) r1 = r0 11: (85) call bpf_map_lookup_elem#73424 12: (15) if r0 == 0x0 goto pc+23 [...] # bpftool map show id 2 <-- show/dump/etc map id:2 2: hash_of_maps flags 0x0 key 4B value 4B max_entries 3 memlock 4096B Example, JITed, same prog: # tc filter show dev foo ingress filter protocol all pref 49152 bpf chain 0 filter protocol all pref 49152 bpf chain 0 handle 0x1 foo.o:[ingress] \ direct-action not_in_hw id 3 tag c74773051b364165 jited # bpftool prog show id 3 3: sched_cls tag c74773051b364165 loaded_at Dec 19/13:48 uid 0 xlated 384B jited 257B memlock 4096B map_ids 2 # bpftool prog dump xlated id 3 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] <-- map id:2 6: (85) call __htab_map_lookup_elem#77408 <-+ inlined rewrite 7: (15) if r0 == 0x0 goto pc+2 | 8: (07) r0 += 56 | 9: (79) r0 = *(u64 *)(r0 +0) <-+ 10: (15) if r0 == 0x0 goto pc+24 11: (bf) r2 = r10 12: (07) r2 += -4 [...] Example, same prog, but kallsyms disabled (in that case we are also not allowed to pass any relative offsets, etc, so prog becomes pointer sanitized on dump): # sysctl kernel.kptr_restrict=2 kernel.kptr_restrict = 2 # bpftool prog dump xlated id 3 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] 6: (85) call bpf_unspec#0 7: (15) if r0 == 0x0 goto pc+2 [...] Example, BPF calls via interpreter: # bpftool prog dump xlated id 1 0: (85) call pc+2#__bpf_prog_run_args32 1: (b7) r0 = 1 2: (95) exit 3: (b7) r0 = 2 4: (95) exit Example, BPF calls via JIT: # sysctl net.core.bpf_jit_enable=1 net.core.bpf_jit_enable = 1 # sysctl net.core.bpf_jit_kallsyms=1 net.core.bpf_jit_kallsyms = 1 # bpftool prog dump xlated id 1 0: (85) call pc+2#bpf_prog_3b185187f1855c4c_F 1: (b7) r0 = 1 2: (95) exit 3: (b7) r0 = 2 4: (95) exit And finally, an example for tail calls that is now working as well wrt correlation: # bpftool prog dump xlated id 2 [...] 10: (b7) r2 = 8 11: (85) call bpf_trace_printk#-41312 12: (bf) r1 = r6 13: (18) r2 = map[id:1] 15: (b7) r3 = 0 16: (85) call bpf_tail_call#12 17: (b7) r1 = 42 18: (6b) *(u16 *)(r6 +46) = r1 19: (b7) r0 = 0 20: (95) exit # bpftool map show id 1 1: prog_array flags 0x0 key 4B value 4B max_entries 1 memlock 4096B Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-12-20 12:42:57 +00:00
struct bpf_insn *insn;
bpf: x64: add JIT support for multi-function programs Typical JIT does several passes over bpf instructions to compute total size and relative offsets of jumps and calls. With multitple bpf functions calling each other all relative calls will have invalid offsets intially therefore we need to additional last pass over the program to emit calls with correct offsets. For example in case of three bpf functions: main: call foo call bpf_map_lookup exit foo: call bar exit bar: exit We will call bpf_int_jit_compile() indepedently for main(), foo() and bar() x64 JIT typically does 4-5 passes to converge. After these initial passes the image for these 3 functions will be good except call targets, since start addresses of foo() and bar() are unknown when we were JITing main() (note that call bpf_map_lookup will be resolved properly during initial passes). Once start addresses of 3 functions are known we patch call_insn->imm to point to right functions and call bpf_int_jit_compile() again which needs only one pass. Additional safety checks are done to make sure this last pass doesn't produce image that is larger or smaller than previous pass. When constant blinding is on it's applied to all functions at the first pass, since doing it once again at the last pass can change size of the JITed code. Tested on x64 and arm64 hw with JIT on/off, blinding on/off. x64 jits bpf-to-bpf calls correctly while arm64 falls back to interpreter. All other JITs that support normal BPF_CALL will behave the same way since bpf-to-bpf call is equivalent to bpf-to-kernel call from JITs point of view. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:15 +00:00
void *old_bpf_func;
int err = -ENOMEM;
if (env->subprog_cnt == 0)
return 0;
bpf: allow for correlation of maps and helpers in dump Currently a dump of an xlated prog (post verifier stage) doesn't correlate used helpers as well as maps. The prog info lists involved map ids, however there's no correlation of where in the program they are used as of today. Likewise, bpftool does not correlate helper calls with the target functions. The latter can be done w/o any kernel changes through kallsyms, and also has the advantage that this works with inlined helpers and BPF calls. Example, via interpreter: # tc filter show dev foo ingress filter protocol all pref 49152 bpf chain 0 filter protocol all pref 49152 bpf chain 0 handle 0x1 foo.o:[ingress] \ direct-action not_in_hw id 1 tag c74773051b364165 <-- prog id:1 * Output before patch (calls/maps remain unclear): # bpftool prog dump xlated id 1 <-- dump prog id:1 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = 0xffff95c47a8d4800 6: (85) call unknown#73040 7: (15) if r0 == 0x0 goto pc+18 8: (bf) r2 = r10 9: (07) r2 += -4 10: (bf) r1 = r0 11: (85) call unknown#73040 12: (15) if r0 == 0x0 goto pc+23 [...] * Output after patch: # bpftool prog dump xlated id 1 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] <-- map id:2 6: (85) call bpf_map_lookup_elem#73424 <-- helper call 7: (15) if r0 == 0x0 goto pc+18 8: (bf) r2 = r10 9: (07) r2 += -4 10: (bf) r1 = r0 11: (85) call bpf_map_lookup_elem#73424 12: (15) if r0 == 0x0 goto pc+23 [...] # bpftool map show id 2 <-- show/dump/etc map id:2 2: hash_of_maps flags 0x0 key 4B value 4B max_entries 3 memlock 4096B Example, JITed, same prog: # tc filter show dev foo ingress filter protocol all pref 49152 bpf chain 0 filter protocol all pref 49152 bpf chain 0 handle 0x1 foo.o:[ingress] \ direct-action not_in_hw id 3 tag c74773051b364165 jited # bpftool prog show id 3 3: sched_cls tag c74773051b364165 loaded_at Dec 19/13:48 uid 0 xlated 384B jited 257B memlock 4096B map_ids 2 # bpftool prog dump xlated id 3 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] <-- map id:2 6: (85) call __htab_map_lookup_elem#77408 <-+ inlined rewrite 7: (15) if r0 == 0x0 goto pc+2 | 8: (07) r0 += 56 | 9: (79) r0 = *(u64 *)(r0 +0) <-+ 10: (15) if r0 == 0x0 goto pc+24 11: (bf) r2 = r10 12: (07) r2 += -4 [...] Example, same prog, but kallsyms disabled (in that case we are also not allowed to pass any relative offsets, etc, so prog becomes pointer sanitized on dump): # sysctl kernel.kptr_restrict=2 kernel.kptr_restrict = 2 # bpftool prog dump xlated id 3 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] 6: (85) call bpf_unspec#0 7: (15) if r0 == 0x0 goto pc+2 [...] Example, BPF calls via interpreter: # bpftool prog dump xlated id 1 0: (85) call pc+2#__bpf_prog_run_args32 1: (b7) r0 = 1 2: (95) exit 3: (b7) r0 = 2 4: (95) exit Example, BPF calls via JIT: # sysctl net.core.bpf_jit_enable=1 net.core.bpf_jit_enable = 1 # sysctl net.core.bpf_jit_kallsyms=1 net.core.bpf_jit_kallsyms = 1 # bpftool prog dump xlated id 1 0: (85) call pc+2#bpf_prog_3b185187f1855c4c_F 1: (b7) r0 = 1 2: (95) exit 3: (b7) r0 = 2 4: (95) exit And finally, an example for tail calls that is now working as well wrt correlation: # bpftool prog dump xlated id 2 [...] 10: (b7) r2 = 8 11: (85) call bpf_trace_printk#-41312 12: (bf) r1 = r6 13: (18) r2 = map[id:1] 15: (b7) r3 = 0 16: (85) call bpf_tail_call#12 17: (b7) r1 = 42 18: (6b) *(u16 *)(r6 +46) = r1 19: (b7) r0 = 0 20: (95) exit # bpftool map show id 1 1: prog_array flags 0x0 key 4B value 4B max_entries 1 memlock 4096B Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-12-20 12:42:57 +00:00
for (i = 0, insn = prog->insnsi; i < prog->len; i++, insn++) {
bpf: x64: add JIT support for multi-function programs Typical JIT does several passes over bpf instructions to compute total size and relative offsets of jumps and calls. With multitple bpf functions calling each other all relative calls will have invalid offsets intially therefore we need to additional last pass over the program to emit calls with correct offsets. For example in case of three bpf functions: main: call foo call bpf_map_lookup exit foo: call bar exit bar: exit We will call bpf_int_jit_compile() indepedently for main(), foo() and bar() x64 JIT typically does 4-5 passes to converge. After these initial passes the image for these 3 functions will be good except call targets, since start addresses of foo() and bar() are unknown when we were JITing main() (note that call bpf_map_lookup will be resolved properly during initial passes). Once start addresses of 3 functions are known we patch call_insn->imm to point to right functions and call bpf_int_jit_compile() again which needs only one pass. Additional safety checks are done to make sure this last pass doesn't produce image that is larger or smaller than previous pass. When constant blinding is on it's applied to all functions at the first pass, since doing it once again at the last pass can change size of the JITed code. Tested on x64 and arm64 hw with JIT on/off, blinding on/off. x64 jits bpf-to-bpf calls correctly while arm64 falls back to interpreter. All other JITs that support normal BPF_CALL will behave the same way since bpf-to-bpf call is equivalent to bpf-to-kernel call from JITs point of view. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:15 +00:00
if (insn->code != (BPF_JMP | BPF_CALL) ||
insn->src_reg != BPF_PSEUDO_CALL)
continue;
subprog = find_subprog(env, i + insn->imm + 1);
if (subprog < 0) {
WARN_ONCE(1, "verifier bug. No program starts at insn %d\n",
i + insn->imm + 1);
return -EFAULT;
}
/* temporarily remember subprog id inside insn instead of
* aux_data, since next loop will split up all insns into funcs
*/
insn->off = subprog + 1;
/* remember original imm in case JIT fails and fallback
* to interpreter will be needed
*/
env->insn_aux_data[i].call_imm = insn->imm;
/* point imm to __bpf_call_base+1 from JITs point of view */
insn->imm = 1;
}
func = kzalloc(sizeof(prog) * (env->subprog_cnt + 1), GFP_KERNEL);
if (!func)
return -ENOMEM;
for (i = 0; i <= env->subprog_cnt; i++) {
subprog_start = subprog_end;
if (env->subprog_cnt == i)
subprog_end = prog->len;
else
subprog_end = env->subprog_starts[i];
len = subprog_end - subprog_start;
func[i] = bpf_prog_alloc(bpf_prog_size(len), GFP_USER);
if (!func[i])
goto out_free;
memcpy(func[i]->insnsi, &prog->insnsi[subprog_start],
len * sizeof(struct bpf_insn));
func[i]->type = prog->type;
bpf: x64: add JIT support for multi-function programs Typical JIT does several passes over bpf instructions to compute total size and relative offsets of jumps and calls. With multitple bpf functions calling each other all relative calls will have invalid offsets intially therefore we need to additional last pass over the program to emit calls with correct offsets. For example in case of three bpf functions: main: call foo call bpf_map_lookup exit foo: call bar exit bar: exit We will call bpf_int_jit_compile() indepedently for main(), foo() and bar() x64 JIT typically does 4-5 passes to converge. After these initial passes the image for these 3 functions will be good except call targets, since start addresses of foo() and bar() are unknown when we were JITing main() (note that call bpf_map_lookup will be resolved properly during initial passes). Once start addresses of 3 functions are known we patch call_insn->imm to point to right functions and call bpf_int_jit_compile() again which needs only one pass. Additional safety checks are done to make sure this last pass doesn't produce image that is larger or smaller than previous pass. When constant blinding is on it's applied to all functions at the first pass, since doing it once again at the last pass can change size of the JITed code. Tested on x64 and arm64 hw with JIT on/off, blinding on/off. x64 jits bpf-to-bpf calls correctly while arm64 falls back to interpreter. All other JITs that support normal BPF_CALL will behave the same way since bpf-to-bpf call is equivalent to bpf-to-kernel call from JITs point of view. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:15 +00:00
func[i]->len = len;
if (bpf_prog_calc_tag(func[i]))
goto out_free;
bpf: x64: add JIT support for multi-function programs Typical JIT does several passes over bpf instructions to compute total size and relative offsets of jumps and calls. With multitple bpf functions calling each other all relative calls will have invalid offsets intially therefore we need to additional last pass over the program to emit calls with correct offsets. For example in case of three bpf functions: main: call foo call bpf_map_lookup exit foo: call bar exit bar: exit We will call bpf_int_jit_compile() indepedently for main(), foo() and bar() x64 JIT typically does 4-5 passes to converge. After these initial passes the image for these 3 functions will be good except call targets, since start addresses of foo() and bar() are unknown when we were JITing main() (note that call bpf_map_lookup will be resolved properly during initial passes). Once start addresses of 3 functions are known we patch call_insn->imm to point to right functions and call bpf_int_jit_compile() again which needs only one pass. Additional safety checks are done to make sure this last pass doesn't produce image that is larger or smaller than previous pass. When constant blinding is on it's applied to all functions at the first pass, since doing it once again at the last pass can change size of the JITed code. Tested on x64 and arm64 hw with JIT on/off, blinding on/off. x64 jits bpf-to-bpf calls correctly while arm64 falls back to interpreter. All other JITs that support normal BPF_CALL will behave the same way since bpf-to-bpf call is equivalent to bpf-to-kernel call from JITs point of view. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:15 +00:00
func[i]->is_func = 1;
/* Use bpf_prog_F_tag to indicate functions in stack traces.
* Long term would need debug info to populate names
*/
func[i]->aux->name[0] = 'F';
func[i]->aux->stack_depth = env->subprog_stack_depth[i];
func[i]->jit_requested = 1;
func[i] = bpf_int_jit_compile(func[i]);
if (!func[i]->jited) {
err = -ENOTSUPP;
goto out_free;
}
cond_resched();
}
/* at this point all bpf functions were successfully JITed
* now populate all bpf_calls with correct addresses and
* run last pass of JIT
*/
for (i = 0; i <= env->subprog_cnt; i++) {
insn = func[i]->insnsi;
for (j = 0; j < func[i]->len; j++, insn++) {
if (insn->code != (BPF_JMP | BPF_CALL) ||
insn->src_reg != BPF_PSEUDO_CALL)
continue;
subprog = insn->off;
insn->off = 0;
insn->imm = (u64 (*)(u64, u64, u64, u64, u64))
func[subprog]->bpf_func -
__bpf_call_base;
}
}
for (i = 0; i <= env->subprog_cnt; i++) {
old_bpf_func = func[i]->bpf_func;
tmp = bpf_int_jit_compile(func[i]);
if (tmp != func[i] || func[i]->bpf_func != old_bpf_func) {
verbose(env, "JIT doesn't support bpf-to-bpf calls\n");
err = -EFAULT;
goto out_free;
}
cond_resched();
}
/* finally lock prog and jit images for all functions and
* populate kallsysm
*/
for (i = 0; i <= env->subprog_cnt; i++) {
bpf_prog_lock_ro(func[i]);
bpf_prog_kallsyms_add(func[i]);
}
bpf: allow for correlation of maps and helpers in dump Currently a dump of an xlated prog (post verifier stage) doesn't correlate used helpers as well as maps. The prog info lists involved map ids, however there's no correlation of where in the program they are used as of today. Likewise, bpftool does not correlate helper calls with the target functions. The latter can be done w/o any kernel changes through kallsyms, and also has the advantage that this works with inlined helpers and BPF calls. Example, via interpreter: # tc filter show dev foo ingress filter protocol all pref 49152 bpf chain 0 filter protocol all pref 49152 bpf chain 0 handle 0x1 foo.o:[ingress] \ direct-action not_in_hw id 1 tag c74773051b364165 <-- prog id:1 * Output before patch (calls/maps remain unclear): # bpftool prog dump xlated id 1 <-- dump prog id:1 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = 0xffff95c47a8d4800 6: (85) call unknown#73040 7: (15) if r0 == 0x0 goto pc+18 8: (bf) r2 = r10 9: (07) r2 += -4 10: (bf) r1 = r0 11: (85) call unknown#73040 12: (15) if r0 == 0x0 goto pc+23 [...] * Output after patch: # bpftool prog dump xlated id 1 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] <-- map id:2 6: (85) call bpf_map_lookup_elem#73424 <-- helper call 7: (15) if r0 == 0x0 goto pc+18 8: (bf) r2 = r10 9: (07) r2 += -4 10: (bf) r1 = r0 11: (85) call bpf_map_lookup_elem#73424 12: (15) if r0 == 0x0 goto pc+23 [...] # bpftool map show id 2 <-- show/dump/etc map id:2 2: hash_of_maps flags 0x0 key 4B value 4B max_entries 3 memlock 4096B Example, JITed, same prog: # tc filter show dev foo ingress filter protocol all pref 49152 bpf chain 0 filter protocol all pref 49152 bpf chain 0 handle 0x1 foo.o:[ingress] \ direct-action not_in_hw id 3 tag c74773051b364165 jited # bpftool prog show id 3 3: sched_cls tag c74773051b364165 loaded_at Dec 19/13:48 uid 0 xlated 384B jited 257B memlock 4096B map_ids 2 # bpftool prog dump xlated id 3 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] <-- map id:2 6: (85) call __htab_map_lookup_elem#77408 <-+ inlined rewrite 7: (15) if r0 == 0x0 goto pc+2 | 8: (07) r0 += 56 | 9: (79) r0 = *(u64 *)(r0 +0) <-+ 10: (15) if r0 == 0x0 goto pc+24 11: (bf) r2 = r10 12: (07) r2 += -4 [...] Example, same prog, but kallsyms disabled (in that case we are also not allowed to pass any relative offsets, etc, so prog becomes pointer sanitized on dump): # sysctl kernel.kptr_restrict=2 kernel.kptr_restrict = 2 # bpftool prog dump xlated id 3 0: (b7) r1 = 2 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 3: (07) r2 += -4 4: (18) r1 = map[id:2] 6: (85) call bpf_unspec#0 7: (15) if r0 == 0x0 goto pc+2 [...] Example, BPF calls via interpreter: # bpftool prog dump xlated id 1 0: (85) call pc+2#__bpf_prog_run_args32 1: (b7) r0 = 1 2: (95) exit 3: (b7) r0 = 2 4: (95) exit Example, BPF calls via JIT: # sysctl net.core.bpf_jit_enable=1 net.core.bpf_jit_enable = 1 # sysctl net.core.bpf_jit_kallsyms=1 net.core.bpf_jit_kallsyms = 1 # bpftool prog dump xlated id 1 0: (85) call pc+2#bpf_prog_3b185187f1855c4c_F 1: (b7) r0 = 1 2: (95) exit 3: (b7) r0 = 2 4: (95) exit And finally, an example for tail calls that is now working as well wrt correlation: # bpftool prog dump xlated id 2 [...] 10: (b7) r2 = 8 11: (85) call bpf_trace_printk#-41312 12: (bf) r1 = r6 13: (18) r2 = map[id:1] 15: (b7) r3 = 0 16: (85) call bpf_tail_call#12 17: (b7) r1 = 42 18: (6b) *(u16 *)(r6 +46) = r1 19: (b7) r0 = 0 20: (95) exit # bpftool map show id 1 1: prog_array flags 0x0 key 4B value 4B max_entries 1 memlock 4096B Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-12-20 12:42:57 +00:00
/* Last step: make now unused interpreter insns from main
* prog consistent for later dump requests, so they can
* later look the same as if they were interpreted only.
*/
for (i = 0, insn = prog->insnsi; i < prog->len; i++, insn++) {
unsigned long addr;
if (insn->code != (BPF_JMP | BPF_CALL) ||
insn->src_reg != BPF_PSEUDO_CALL)
continue;
insn->off = env->insn_aux_data[i].call_imm;
subprog = find_subprog(env, i + insn->off + 1);
addr = (unsigned long)func[subprog + 1]->bpf_func;
addr &= PAGE_MASK;
insn->imm = (u64 (*)(u64, u64, u64, u64, u64))
addr - __bpf_call_base;
}
bpf: x64: add JIT support for multi-function programs Typical JIT does several passes over bpf instructions to compute total size and relative offsets of jumps and calls. With multitple bpf functions calling each other all relative calls will have invalid offsets intially therefore we need to additional last pass over the program to emit calls with correct offsets. For example in case of three bpf functions: main: call foo call bpf_map_lookup exit foo: call bar exit bar: exit We will call bpf_int_jit_compile() indepedently for main(), foo() and bar() x64 JIT typically does 4-5 passes to converge. After these initial passes the image for these 3 functions will be good except call targets, since start addresses of foo() and bar() are unknown when we were JITing main() (note that call bpf_map_lookup will be resolved properly during initial passes). Once start addresses of 3 functions are known we patch call_insn->imm to point to right functions and call bpf_int_jit_compile() again which needs only one pass. Additional safety checks are done to make sure this last pass doesn't produce image that is larger or smaller than previous pass. When constant blinding is on it's applied to all functions at the first pass, since doing it once again at the last pass can change size of the JITed code. Tested on x64 and arm64 hw with JIT on/off, blinding on/off. x64 jits bpf-to-bpf calls correctly while arm64 falls back to interpreter. All other JITs that support normal BPF_CALL will behave the same way since bpf-to-bpf call is equivalent to bpf-to-kernel call from JITs point of view. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:15 +00:00
prog->jited = 1;
prog->bpf_func = func[0]->bpf_func;
prog->aux->func = func;
prog->aux->func_cnt = env->subprog_cnt + 1;
return 0;
out_free:
for (i = 0; i <= env->subprog_cnt; i++)
if (func[i])
bpf_jit_free(func[i]);
kfree(func);
/* cleanup main prog to be interpreted */
prog->jit_requested = 0;
for (i = 0, insn = prog->insnsi; i < prog->len; i++, insn++) {
if (insn->code != (BPF_JMP | BPF_CALL) ||
insn->src_reg != BPF_PSEUDO_CALL)
continue;
insn->off = 0;
insn->imm = env->insn_aux_data[i].call_imm;
}
return err;
}
static int fixup_call_args(struct bpf_verifier_env *env)
{
#ifndef CONFIG_BPF_JIT_ALWAYS_ON
struct bpf_prog *prog = env->prog;
struct bpf_insn *insn = prog->insnsi;
int i, depth;
#endif
int err;
err = 0;
if (env->prog->jit_requested) {
err = jit_subprogs(env);
if (err == 0)
bpf: x64: add JIT support for multi-function programs Typical JIT does several passes over bpf instructions to compute total size and relative offsets of jumps and calls. With multitple bpf functions calling each other all relative calls will have invalid offsets intially therefore we need to additional last pass over the program to emit calls with correct offsets. For example in case of three bpf functions: main: call foo call bpf_map_lookup exit foo: call bar exit bar: exit We will call bpf_int_jit_compile() indepedently for main(), foo() and bar() x64 JIT typically does 4-5 passes to converge. After these initial passes the image for these 3 functions will be good except call targets, since start addresses of foo() and bar() are unknown when we were JITing main() (note that call bpf_map_lookup will be resolved properly during initial passes). Once start addresses of 3 functions are known we patch call_insn->imm to point to right functions and call bpf_int_jit_compile() again which needs only one pass. Additional safety checks are done to make sure this last pass doesn't produce image that is larger or smaller than previous pass. When constant blinding is on it's applied to all functions at the first pass, since doing it once again at the last pass can change size of the JITed code. Tested on x64 and arm64 hw with JIT on/off, blinding on/off. x64 jits bpf-to-bpf calls correctly while arm64 falls back to interpreter. All other JITs that support normal BPF_CALL will behave the same way since bpf-to-bpf call is equivalent to bpf-to-kernel call from JITs point of view. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:15 +00:00
return 0;
}
#ifndef CONFIG_BPF_JIT_ALWAYS_ON
for (i = 0; i < prog->len; i++, insn++) {
if (insn->code != (BPF_JMP | BPF_CALL) ||
insn->src_reg != BPF_PSEUDO_CALL)
continue;
depth = get_callee_stack_depth(env, insn, i);
if (depth < 0)
return depth;
bpf_patch_call_args(insn, depth);
}
err = 0;
#endif
return err;
}
/* fixup insn->imm field of bpf_call instructions
* and inline eligible helpers as explicit sequence of BPF instructions
*
* this function is called after eBPF program passed verification
*/
static int fixup_bpf_calls(struct bpf_verifier_env *env)
{
struct bpf_prog *prog = env->prog;
struct bpf_insn *insn = prog->insnsi;
const struct bpf_func_proto *fn;
const int insn_cnt = prog->len;
struct bpf_insn insn_buf[16];
struct bpf_prog *new_prog;
struct bpf_map *map_ptr;
int i, cnt, delta = 0;
for (i = 0; i < insn_cnt; i++, insn++) {
if (insn->code != (BPF_JMP | BPF_CALL))
continue;
bpf: introduce function calls (function boundaries) Allow arbitrary function calls from bpf function to another bpf function. Since the beginning of bpf all bpf programs were represented as a single function and program authors were forced to use always_inline for all functions in their C code. That was causing llvm to unnecessary inflate the code size and forcing developers to move code to header files with little code reuse. With a bit of additional complexity teach verifier to recognize arbitrary function calls from one bpf function to another as long as all of functions are presented to the verifier as a single bpf program. New program layout: r6 = r1 // some code .. r1 = .. // arg1 r2 = .. // arg2 call pc+1 // function call pc-relative exit .. = r1 // access arg1 .. = r2 // access arg2 .. call pc+20 // second level of function call ... It allows for better optimized code and finally allows to introduce the core bpf libraries that can be reused in different projects, since programs are no longer limited by single elf file. With function calls bpf can be compiled into multiple .o files. This patch is the first step. It detects programs that contain multiple functions and checks that calls between them are valid. It splits the sequence of bpf instructions (one program) into a set of bpf functions that call each other. Calls to only known functions are allowed. In the future the verifier may allow calls to unresolved functions and will do dynamic linking. This logic supports statically linked bpf functions only. Such function boundary detection could have been done as part of control flow graph building in check_cfg(), but it's cleaner to separate function boundary detection vs control flow checks within a subprogram (function) into logically indepedent steps. Follow up patches may split check_cfg() further, but not check_subprogs(). Only allow bpf-to-bpf calls for root only and for non-hw-offloaded programs. These restrictions can be relaxed in the future. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:05 +00:00
if (insn->src_reg == BPF_PSEUDO_CALL)
continue;
if (insn->imm == BPF_FUNC_get_route_realm)
prog->dst_needed = 1;
if (insn->imm == BPF_FUNC_get_prandom_u32)
bpf_user_rnd_init_once();
if (insn->imm == BPF_FUNC_override_return)
prog->kprobe_override = 1;
if (insn->imm == BPF_FUNC_tail_call) {
/* If we tail call into other programs, we
* cannot make any assumptions since they can
* be replaced dynamically during runtime in
* the program array.
*/
prog->cb_access = 1;
env->prog->aux->stack_depth = MAX_BPF_STACK;
/* mark bpf_tail_call as different opcode to avoid
* conditional branch in the interpeter for every normal
* call and to prevent accidental JITing by JIT compiler
* that doesn't support bpf_tail_call yet
*/
insn->imm = 0;
insn->code = BPF_JMP | BPF_TAIL_CALL;
bpf: prevent out-of-bounds speculation Under speculation, CPUs may mis-predict branches in bounds checks. Thus, memory accesses under a bounds check may be speculated even if the bounds check fails, providing a primitive for building a side channel. To avoid leaking kernel data round up array-based maps and mask the index after bounds check, so speculated load with out of bounds index will load either valid value from the array or zero from the padded area. Unconditionally mask index for all array types even when max_entries are not rounded to power of 2 for root user. When map is created by unpriv user generate a sequence of bpf insns that includes AND operation to make sure that JITed code includes the same 'index & index_mask' operation. If prog_array map is created by unpriv user replace bpf_tail_call(ctx, map, index); with if (index >= max_entries) { index &= map->index_mask; bpf_tail_call(ctx, map, index); } (along with roundup to power 2) to prevent out-of-bounds speculation. There is secondary redundant 'if (index >= max_entries)' in the interpreter and in all JITs, but they can be optimized later if necessary. Other array-like maps (cpumap, devmap, sockmap, perf_event_array, cgroup_array) cannot be used by unpriv, so no changes there. That fixes bpf side of "Variant 1: bounds check bypass (CVE-2017-5753)" on all architectures with and without JIT. v2->v3: Daniel noticed that attack potentially can be crafted via syscall commands without loading the program, so add masking to those paths as well. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-08 01:33:02 +00:00
/* instead of changing every JIT dealing with tail_call
* emit two extra insns:
* if (index >= max_entries) goto out;
* index &= array->index_mask;
* to avoid out-of-bounds cpu speculation
*/
map_ptr = env->insn_aux_data[i + delta].map_ptr;
if (map_ptr == BPF_MAP_PTR_POISON) {
verbose(env, "tail_call abusing map_ptr\n");
bpf: prevent out-of-bounds speculation Under speculation, CPUs may mis-predict branches in bounds checks. Thus, memory accesses under a bounds check may be speculated even if the bounds check fails, providing a primitive for building a side channel. To avoid leaking kernel data round up array-based maps and mask the index after bounds check, so speculated load with out of bounds index will load either valid value from the array or zero from the padded area. Unconditionally mask index for all array types even when max_entries are not rounded to power of 2 for root user. When map is created by unpriv user generate a sequence of bpf insns that includes AND operation to make sure that JITed code includes the same 'index & index_mask' operation. If prog_array map is created by unpriv user replace bpf_tail_call(ctx, map, index); with if (index >= max_entries) { index &= map->index_mask; bpf_tail_call(ctx, map, index); } (along with roundup to power 2) to prevent out-of-bounds speculation. There is secondary redundant 'if (index >= max_entries)' in the interpreter and in all JITs, but they can be optimized later if necessary. Other array-like maps (cpumap, devmap, sockmap, perf_event_array, cgroup_array) cannot be used by unpriv, so no changes there. That fixes bpf side of "Variant 1: bounds check bypass (CVE-2017-5753)" on all architectures with and without JIT. v2->v3: Daniel noticed that attack potentially can be crafted via syscall commands without loading the program, so add masking to those paths as well. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-08 01:33:02 +00:00
return -EINVAL;
}
if (!map_ptr->unpriv_array)
continue;
insn_buf[0] = BPF_JMP_IMM(BPF_JGE, BPF_REG_3,
map_ptr->max_entries, 2);
insn_buf[1] = BPF_ALU32_IMM(BPF_AND, BPF_REG_3,
container_of(map_ptr,
struct bpf_array,
map)->index_mask);
insn_buf[2] = *insn;
cnt = 3;
new_prog = bpf_patch_insn_data(env, i + delta, insn_buf, cnt);
if (!new_prog)
return -ENOMEM;
delta += cnt - 1;
env->prog = prog = new_prog;
insn = new_prog->insnsi + i + delta;
continue;
}
/* BPF_EMIT_CALL() assumptions in some of the map_gen_lookup
* handlers are currently limited to 64 bit only.
*/
if (prog->jit_requested && BITS_PER_LONG == 64 &&
insn->imm == BPF_FUNC_map_lookup_elem) {
map_ptr = env->insn_aux_data[i + delta].map_ptr;
if (map_ptr == BPF_MAP_PTR_POISON ||
!map_ptr->ops->map_gen_lookup)
goto patch_call_imm;
cnt = map_ptr->ops->map_gen_lookup(map_ptr, insn_buf);
if (cnt == 0 || cnt >= ARRAY_SIZE(insn_buf)) {
verbose(env, "bpf verifier is misconfigured\n");
return -EINVAL;
}
new_prog = bpf_patch_insn_data(env, i + delta, insn_buf,
cnt);
if (!new_prog)
return -ENOMEM;
delta += cnt - 1;
/* keep walking new program and skip insns we just inserted */
env->prog = prog = new_prog;
insn = new_prog->insnsi + i + delta;
continue;
}
bpf: don't select potentially stale ri->map from buggy xdp progs We can potentially run into a couple of issues with the XDP bpf_redirect_map() helper. The ri->map in the per CPU storage can become stale in several ways, mostly due to misuse, where we can then trigger a use after free on the map: i) prog A is calling bpf_redirect_map(), returning XDP_REDIRECT and running on a driver not supporting XDP_REDIRECT yet. The ri->map on that CPU becomes stale when the XDP program is unloaded on the driver, and a prog B loaded on a different driver which supports XDP_REDIRECT return code. prog B would have to omit calling to bpf_redirect_map() and just return XDP_REDIRECT, which would then access the freed map in xdp_do_redirect() since not cleared for that CPU. ii) prog A is calling bpf_redirect_map(), returning a code other than XDP_REDIRECT. prog A is then detached, which triggers release of the map. prog B is attached which, similarly as in i), would just return XDP_REDIRECT without having called bpf_redirect_map() and thus be accessing the freed map in xdp_do_redirect() since not cleared for that CPU. iii) prog A is attached to generic XDP, calling the bpf_redirect_map() helper and returning XDP_REDIRECT. xdp_do_generic_redirect() is currently not handling ri->map (will be fixed by Jesper), so it's not being reset. Later loading a e.g. native prog B which would, say, call bpf_xdp_redirect() and then returns XDP_REDIRECT would find in xdp_do_redirect() that a map was set and uses that causing use after free on map access. Fix thus needs to avoid accessing stale ri->map pointers, naive way would be to call a BPF function from drivers that just resets it to NULL for all XDP return codes but XDP_REDIRECT and including XDP_REDIRECT for drivers not supporting it yet (and let ri->map being handled in xdp_do_generic_redirect()). There is a less intrusive way w/o letting drivers call a reset for each BPF run. The verifier knows we're calling into bpf_xdp_redirect_map() helper, so it can do a small insn rewrite transparent to the prog itself in the sense that it fills R4 with a pointer to the own bpf_prog. We have that pointer at verification time anyway and R4 is allowed to be used as per calling convention we scratch R0 to R5 anyway, so they become inaccessible and program cannot read them prior to a write. Then, the helper would store the prog pointer in the current CPUs struct redirect_info. Later in xdp_do_*_redirect() we check whether the redirect_info's prog pointer is the same as passed xdp_prog pointer, and if that's the case then all good, since the prog holds a ref on the map anyway, so it is always valid at that point in time and must have a reference count of at least 1. If in the unlikely case they are not equal, it means we got a stale pointer, so we clear and bail out right there. Also do reset map and the owning prog in bpf_xdp_redirect(), so that bpf_xdp_redirect_map() and bpf_xdp_redirect() won't get mixed up, only the last call should take precedence. A tc bpf_redirect() doesn't use map anywhere yet, so no need to clear it there since never accessed in that layer. Note that in case the prog is released, and thus the map as well we're still under RCU read critical section at that time and have preemption disabled as well. Once we commit with the __dev_map_insert_ctx() from xdp_do_redirect_map() and set the map to ri->map_to_flush, we still wait for a xdp_do_flush_map() to finish in devmap dismantle time once flush_needed bit is set, so that is fine. Fixes: 97f91a7cf04f ("bpf: add bpf_redirect_map helper routine") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-07 22:14:51 +00:00
if (insn->imm == BPF_FUNC_redirect_map) {
/* Note, we cannot use prog directly as imm as subsequent
* rewrites would still change the prog pointer. The only
* stable address we can use is aux, which also works with
* prog clones during blinding.
*/
u64 addr = (unsigned long)prog->aux;
bpf: don't select potentially stale ri->map from buggy xdp progs We can potentially run into a couple of issues with the XDP bpf_redirect_map() helper. The ri->map in the per CPU storage can become stale in several ways, mostly due to misuse, where we can then trigger a use after free on the map: i) prog A is calling bpf_redirect_map(), returning XDP_REDIRECT and running on a driver not supporting XDP_REDIRECT yet. The ri->map on that CPU becomes stale when the XDP program is unloaded on the driver, and a prog B loaded on a different driver which supports XDP_REDIRECT return code. prog B would have to omit calling to bpf_redirect_map() and just return XDP_REDIRECT, which would then access the freed map in xdp_do_redirect() since not cleared for that CPU. ii) prog A is calling bpf_redirect_map(), returning a code other than XDP_REDIRECT. prog A is then detached, which triggers release of the map. prog B is attached which, similarly as in i), would just return XDP_REDIRECT without having called bpf_redirect_map() and thus be accessing the freed map in xdp_do_redirect() since not cleared for that CPU. iii) prog A is attached to generic XDP, calling the bpf_redirect_map() helper and returning XDP_REDIRECT. xdp_do_generic_redirect() is currently not handling ri->map (will be fixed by Jesper), so it's not being reset. Later loading a e.g. native prog B which would, say, call bpf_xdp_redirect() and then returns XDP_REDIRECT would find in xdp_do_redirect() that a map was set and uses that causing use after free on map access. Fix thus needs to avoid accessing stale ri->map pointers, naive way would be to call a BPF function from drivers that just resets it to NULL for all XDP return codes but XDP_REDIRECT and including XDP_REDIRECT for drivers not supporting it yet (and let ri->map being handled in xdp_do_generic_redirect()). There is a less intrusive way w/o letting drivers call a reset for each BPF run. The verifier knows we're calling into bpf_xdp_redirect_map() helper, so it can do a small insn rewrite transparent to the prog itself in the sense that it fills R4 with a pointer to the own bpf_prog. We have that pointer at verification time anyway and R4 is allowed to be used as per calling convention we scratch R0 to R5 anyway, so they become inaccessible and program cannot read them prior to a write. Then, the helper would store the prog pointer in the current CPUs struct redirect_info. Later in xdp_do_*_redirect() we check whether the redirect_info's prog pointer is the same as passed xdp_prog pointer, and if that's the case then all good, since the prog holds a ref on the map anyway, so it is always valid at that point in time and must have a reference count of at least 1. If in the unlikely case they are not equal, it means we got a stale pointer, so we clear and bail out right there. Also do reset map and the owning prog in bpf_xdp_redirect(), so that bpf_xdp_redirect_map() and bpf_xdp_redirect() won't get mixed up, only the last call should take precedence. A tc bpf_redirect() doesn't use map anywhere yet, so no need to clear it there since never accessed in that layer. Note that in case the prog is released, and thus the map as well we're still under RCU read critical section at that time and have preemption disabled as well. Once we commit with the __dev_map_insert_ctx() from xdp_do_redirect_map() and set the map to ri->map_to_flush, we still wait for a xdp_do_flush_map() to finish in devmap dismantle time once flush_needed bit is set, so that is fine. Fixes: 97f91a7cf04f ("bpf: add bpf_redirect_map helper routine") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-07 22:14:51 +00:00
struct bpf_insn r4_ld[] = {
BPF_LD_IMM64(BPF_REG_4, addr),
*insn,
};
cnt = ARRAY_SIZE(r4_ld);
new_prog = bpf_patch_insn_data(env, i + delta, r4_ld, cnt);
if (!new_prog)
return -ENOMEM;
delta += cnt - 1;
env->prog = prog = new_prog;
insn = new_prog->insnsi + i + delta;
}
patch_call_imm:
fn = env->ops->get_func_proto(insn->imm);
/* all functions that have prototype and verifier allowed
* programs to call them, must be real in-kernel functions
*/
if (!fn->func) {
verbose(env,
"kernel subsystem misconfigured func %s#%d\n",
func_id_name(insn->imm), insn->imm);
return -EFAULT;
}
insn->imm = fn->func - __bpf_call_base;
}
return 0;
}
static void free_states(struct bpf_verifier_env *env)
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
{
struct bpf_verifier_state_list *sl, *sln;
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
int i;
if (!env->explored_states)
return;
for (i = 0; i < env->prog->len; i++) {
sl = env->explored_states[i];
if (sl)
while (sl != STATE_LIST_MARK) {
sln = sl->next;
free_verifier_state(&sl->state, false);
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
kfree(sl);
sl = sln;
}
}
kfree(env->explored_states);
}
int bpf_check(struct bpf_prog **prog, union bpf_attr *attr)
{
struct bpf_verifier_env *env;
struct bpf_verifer_log *log;
int ret = -EINVAL;
/* no program is valid */
if (ARRAY_SIZE(bpf_verifier_ops) == 0)
return -EINVAL;
/* 'struct bpf_verifier_env' can be global, but since it's not small,
* allocate/free it every time bpf_check() is called
*/
env = kzalloc(sizeof(struct bpf_verifier_env), GFP_KERNEL);
if (!env)
return -ENOMEM;
log = &env->log;
env->insn_aux_data = vzalloc(sizeof(struct bpf_insn_aux_data) *
(*prog)->len);
ret = -ENOMEM;
if (!env->insn_aux_data)
goto err_free_env;
env->prog = *prog;
env->ops = bpf_verifier_ops[env->prog->type];
/* grab the mutex to protect few globals used by verifier */
mutex_lock(&bpf_verifier_lock);
if (attr->log_level || attr->log_buf || attr->log_size) {
/* user requested verbose verifier output
* and supplied buffer to store the verification trace
*/
log->level = attr->log_level;
log->ubuf = (char __user *) (unsigned long) attr->log_buf;
log->len_total = attr->log_size;
ret = -EINVAL;
/* log attributes have to be sane */
if (log->len_total < 128 || log->len_total > UINT_MAX >> 8 ||
!log->level || !log->ubuf)
goto err_unlock;
}
bpf: fix incorrect pruning decision when alignment must be tracked Currently, when we enforce alignment tracking on direct packet access, the verifier lets the following program pass despite doing a packet write with unaligned access: 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (61) r7 = *(u32 *)(r1 +8) 3: (bf) r0 = r2 4: (07) r0 += 14 5: (25) if r7 > 0x1 goto pc+4 R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R7=inv,min_value=0,max_value=1 R10=fp 6: (2d) if r0 > r3 goto pc+1 R0=pkt(id=0,off=14,r=14) R1=ctx R2=pkt(id=0,off=0,r=14) R3=pkt_end R7=inv,min_value=0,max_value=1 R10=fp 7: (63) *(u32 *)(r0 -4) = r0 8: (b7) r0 = 0 9: (95) exit from 6 to 8: R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R7=inv,min_value=0,max_value=1 R10=fp 8: (b7) r0 = 0 9: (95) exit from 5 to 10: R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R7=inv,min_value=2 R10=fp 10: (07) r0 += 1 11: (05) goto pc-6 6: safe <----- here, wrongly found safe processed 15 insns However, if we enforce a pruning mismatch by adding state into r8 which is then being mismatched in states_equal(), we find that for the otherwise same program, the verifier detects a misaligned packet access when actually walking that path: 0: (61) r2 = *(u32 *)(r1 +76) 1: (61) r3 = *(u32 *)(r1 +80) 2: (61) r7 = *(u32 *)(r1 +8) 3: (b7) r8 = 1 4: (bf) r0 = r2 5: (07) r0 += 14 6: (25) if r7 > 0x1 goto pc+4 R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R7=inv,min_value=0,max_value=1 R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp 7: (2d) if r0 > r3 goto pc+1 R0=pkt(id=0,off=14,r=14) R1=ctx R2=pkt(id=0,off=0,r=14) R3=pkt_end R7=inv,min_value=0,max_value=1 R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp 8: (63) *(u32 *)(r0 -4) = r0 9: (b7) r0 = 0 10: (95) exit from 7 to 9: R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R7=inv,min_value=0,max_value=1 R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp 9: (b7) r0 = 0 10: (95) exit from 6 to 11: R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R7=inv,min_value=2 R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp 11: (07) r0 += 1 12: (b7) r8 = 0 13: (05) goto pc-7 <----- mismatch due to r8 7: (2d) if r0 > r3 goto pc+1 R0=pkt(id=0,off=15,r=15) R1=ctx R2=pkt(id=0,off=0,r=15) R3=pkt_end R7=inv,min_value=2 R8=imm0,min_value=0,max_value=0,min_align=2147483648 R10=fp 8: (63) *(u32 *)(r0 -4) = r0 misaligned packet access off 2+15+-4 size 4 The reason why we fail to see it in states_equal() is that the third test in compare_ptrs_to_packet() ... if (old->off <= cur->off && old->off >= old->range && cur->off >= cur->range) return true; ... will let the above pass. The situation we run into is that old->off <= cur->off (14 <= 15), meaning that prior walked paths went with smaller offset, which was later used in the packet access after successful packet range check and found to be safe already. For example: Given is R0=pkt(id=0,off=0,r=0). Adding offset 14 as in above program to it, results in R0=pkt(id=0,off=14,r=0) before the packet range test. Now, testing this against R3=pkt_end with 'if r0 > r3 goto out' will transform R0 into R0=pkt(id=0,off=14,r=14) for the case when we're within bounds. A write into the packet at offset *(u32 *)(r0 -4), that is, 2 + 14 -4, is valid and aligned (2 is for NET_IP_ALIGN). After processing this with all fall-through paths, we later on check paths from branches. When the above skb->mark test is true, then we jump near the end of the program, perform r0 += 1, and jump back to the 'if r0 > r3 goto out' test we've visited earlier already. This time, R0 is of type R0=pkt(id=0,off=15,r=0), and we'll prune that part because this time we'll have a larger safe packet range, and we already found that with off=14 all further insn were already safe, so it's safe as well with a larger off. However, the problem is that the subsequent write into the packet with 2 + 15 -4 is then unaligned, and not caught by the alignment tracking. Note that min_align, aux_off, and aux_off_align were all 0 in this example. Since we cannot tell at this time what kind of packet access was performed in the prior walk and what minimal requirements it has (we might do so in the future, but that requires more complexity), fix it to disable this pruning case for strict alignment for now, and let the verifier do check such paths instead. With that applied, the test cases pass and reject the program due to misalignment. Fixes: d1174416747d ("bpf: Track alignment of register values in the verifier.") Reference: http://patchwork.ozlabs.org/patch/761909/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24 23:05:05 +00:00
env->strict_alignment = !!(attr->prog_flags & BPF_F_STRICT_ALIGNMENT);
if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS))
env->strict_alignment = true;
if (bpf_prog_is_dev_bound(env->prog->aux)) {
ret = bpf_prog_offload_verifier_prep(env);
if (ret)
goto err_unlock;
}
ret = replace_map_fd_with_map_ptr(env);
if (ret < 0)
goto skip_full_check;
env->explored_states = kcalloc(env->prog->len,
sizeof(struct bpf_verifier_state_list *),
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
GFP_USER);
ret = -ENOMEM;
if (!env->explored_states)
goto skip_full_check;
bpf: introduce function calls (function boundaries) Allow arbitrary function calls from bpf function to another bpf function. Since the beginning of bpf all bpf programs were represented as a single function and program authors were forced to use always_inline for all functions in their C code. That was causing llvm to unnecessary inflate the code size and forcing developers to move code to header files with little code reuse. With a bit of additional complexity teach verifier to recognize arbitrary function calls from one bpf function to another as long as all of functions are presented to the verifier as a single bpf program. New program layout: r6 = r1 // some code .. r1 = .. // arg1 r2 = .. // arg2 call pc+1 // function call pc-relative exit .. = r1 // access arg1 .. = r2 // access arg2 .. call pc+20 // second level of function call ... It allows for better optimized code and finally allows to introduce the core bpf libraries that can be reused in different projects, since programs are no longer limited by single elf file. With function calls bpf can be compiled into multiple .o files. This patch is the first step. It detects programs that contain multiple functions and checks that calls between them are valid. It splits the sequence of bpf instructions (one program) into a set of bpf functions that call each other. Calls to only known functions are allowed. In the future the verifier may allow calls to unresolved functions and will do dynamic linking. This logic supports statically linked bpf functions only. Such function boundary detection could have been done as part of control flow graph building in check_cfg(), but it's cleaner to separate function boundary detection vs control flow checks within a subprogram (function) into logically indepedent steps. Follow up patches may split check_cfg() further, but not check_subprogs(). Only allow bpf-to-bpf calls for root only and for non-hw-offloaded programs. These restrictions can be relaxed in the future. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15 01:55:05 +00:00
env->allow_ptr_leaks = capable(CAP_SYS_ADMIN);
ret = check_cfg(env);
if (ret < 0)
goto skip_full_check;
bpf: verifier (add verifier core) This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 07:17:06 +00:00
ret = do_check(env);
bpf: fix verifier NULL pointer dereference do_check() can fail early without allocating env->cur_state under memory pressure. Syzkaller found the stack below on the linux-next tree because of this. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 27062 Comm: syz-executor5 Not tainted 4.14.0-rc7+ #106 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801c2c74700 task.stack: ffff8801c3e28000 RIP: 0010:free_verifier_state kernel/bpf/verifier.c:347 [inline] RIP: 0010:bpf_check+0xcf4/0x19c0 kernel/bpf/verifier.c:4533 RSP: 0018:ffff8801c3e2f5c8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 00000000fffffff4 RCX: 0000000000000000 RDX: 0000000000000070 RSI: ffffffff817d5aa9 RDI: 0000000000000380 RBP: ffff8801c3e2f668 R08: 0000000000000000 R09: 1ffff100387c5d9f R10: 00000000218c4e80 R11: ffffffff85b34380 R12: ffff8801c4dc6a28 R13: 0000000000000000 R14: ffff8801c4dc6a00 R15: ffff8801c4dc6a20 FS: 00007f311079b700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004d4a24 CR3: 00000001cbcd0000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: bpf_prog_load+0xcbb/0x18e0 kernel/bpf/syscall.c:1166 SYSC_bpf kernel/bpf/syscall.c:1690 [inline] SyS_bpf+0xae9/0x4620 kernel/bpf/syscall.c:1652 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x452869 RSP: 002b:00007f311079abe8 EFLAGS: 00000212 ORIG_RAX: 0000000000000141 RAX: ffffffffffffffda RBX: 0000000000758020 RCX: 0000000000452869 RDX: 0000000000000030 RSI: 0000000020168000 RDI: 0000000000000005 RBP: 00007f311079aa20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000212 R12: 00000000004b7550 R13: 00007f311079ab58 R14: 00000000004b7560 R15: 0000000000000000 Code: df 48 c1 ea 03 80 3c 02 00 0f 85 e6 0b 00 00 4d 8b 6e 20 48 b8 00 00 00 00 00 fc ff df 49 8d bd 80 03 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 b6 0b 00 00 49 8b bd 80 03 00 00 e8 d6 0c 26 RIP: free_verifier_state kernel/bpf/verifier.c:347 [inline] RSP: ffff8801c3e2f5c8 RIP: bpf_check+0xcf4/0x19c0 kernel/bpf/verifier.c:4533 RSP: ffff8801c3e2f5c8 ---[ end trace c8d37f339dc64004 ]--- Fixes: 638f5b90d460 ("bpf: reduce verifier memory consumption") Fixes: 1969db47f8d0 ("bpf: fix verifier memory leaks") Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 15:18:01 +00:00
if (env->cur_state) {
free_verifier_state(env->cur_state, true);
env->cur_state = NULL;
}
skip_full_check:
while (!pop_stack(env, NULL, NULL));
bpf: add search pruning optimization to verifier consider C program represented in eBPF: int filter(int arg) { int a, b, c, *ptr; if (arg == 1) ptr = &a; else if (arg == 2) ptr = &b; else ptr = &c; *ptr = 0; return 0; } eBPF verifier has to follow all possible paths through the program to recognize that '*ptr = 0' instruction would be safe to execute in all situations. It's doing it by picking a path towards the end and observes changes to registers and stack at every insn until it reaches bpf_exit. Then it comes back to one of the previous branches and goes towards the end again with potentially different values in registers. When program has a lot of branches, the number of possible combinations of branches is huge, so verifer has a hard limit of walking no more than 32k instructions. This limit can be reached and complex (but valid) programs could be rejected. Therefore it's important to recognize equivalent verifier states to prune this depth first search. Basic idea can be illustrated by the program (where .. are some eBPF insns): 1: .. 2: if (rX == rY) goto 4 3: .. 4: .. 5: .. 6: bpf_exit In the first pass towards bpf_exit the verifier will walk insns: 1, 2, 3, 4, 5, 6 Since insn#2 is a branch the verifier will remember its state in verifier stack to come back to it later. Since insn#4 is marked as 'branch target', the verifier will remember its state in explored_states[4] linked list. Once it reaches insn#6 successfully it will pop the state recorded at insn#2 and will continue. Without search pruning optimization verifier would have to walk 4, 5, 6 again, effectively simulating execution of insns 1, 2, 4, 5, 6 With search pruning it will check whether state at #4 after jumping from #2 is equivalent to one recorded in explored_states[4] during first pass. If there is an equivalent state, verifier can prune the search at #4 and declare this path to be safe as well. In other words two states at #4 are equivalent if execution of 1, 2, 3, 4 insns and 1, 2, 4 insns produces equivalent registers and stack. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:50:01 +00:00
free_states(env);
if (ret == 0)
sanitize_dead_code(env);
if (ret == 0)
ret = check_max_stack_depth(env);
if (ret == 0)
/* program is valid, convert *(u32*)(ctx + off) accesses */
ret = convert_ctx_accesses(env);
if (ret == 0)
ret = fixup_bpf_calls(env);
if (ret == 0)
ret = fixup_call_args(env);
if (log->level && bpf_verifier_log_full(log))
ret = -ENOSPC;
if (log->level && !log->ubuf) {
ret = -EFAULT;
goto err_release_maps;
}
if (ret == 0 && env->used_map_cnt) {
/* if program passed verifier, update used_maps in bpf_prog_info */
env->prog->aux->used_maps = kmalloc_array(env->used_map_cnt,
sizeof(env->used_maps[0]),
GFP_KERNEL);
if (!env->prog->aux->used_maps) {
ret = -ENOMEM;
goto err_release_maps;
}
memcpy(env->prog->aux->used_maps, env->used_maps,
sizeof(env->used_maps[0]) * env->used_map_cnt);
env->prog->aux->used_map_cnt = env->used_map_cnt;
/* program is valid. Convert pseudo bpf_ld_imm64 into generic
* bpf_ld_imm64 instructions
*/
convert_pseudo_ld_imm64(env);
}
err_release_maps:
if (!env->prog->aux->used_maps)
/* if we didn't copy map pointers into bpf_prog_info, release
* them now. Otherwise free_bpf_prog_info() will release them.
*/
release_maps(env);
*prog = env->prog;
err_unlock:
mutex_unlock(&bpf_verifier_lock);
vfree(env->insn_aux_data);
err_free_env:
kfree(env);
return ret;
}