2008-09-05 03:09:00 +00:00
|
|
|
#include <linux/bootmem.h>
|
2009-03-14 05:49:49 +00:00
|
|
|
#include <linux/linkage.h>
|
2008-09-05 03:09:00 +00:00
|
|
|
#include <linux/bitops.h>
|
2009-03-14 05:49:49 +00:00
|
|
|
#include <linux/kernel.h>
|
2008-09-05 03:09:00 +00:00
|
|
|
#include <linux/module.h>
|
2009-03-14 05:49:49 +00:00
|
|
|
#include <linux/percpu.h>
|
|
|
|
#include <linux/string.h>
|
x86/cpu: Trim model ID whitespace
We did try trimming whitespace surrounding the 'model name'
field in /proc/cpuinfo since reportedly some userspace uses it
in string comparisons and there were discrepancies:
[thetango@prarit ~]# grep "^model name" /proc/cpuinfo | uniq -c | sed 's/\ /_/g'
______1_model_name :_AMD_Opteron(TM)_Processor_6272
_____63_model_name :_AMD_Opteron(TM)_Processor_6272_________________
However, there were issues with overlapping buffers, string
sizes and non-byte-sized copies in the previous proposed
solutions; see Link tags below for the whole farce.
So, instead of diddling with this more, let's simply extend what
was there originally with trimming any present trailing
whitespace. Final result is really simple and obvious.
Testing with the most insane model IDs qemu can generate, looks
good:
.model_id = " My funny model ID CPU ",
______4_model_name :_My_funny_model_ID_CPU
.model_id = "My funny model ID CPU ",
______4_model_name :_My_funny_model_ID_CPU
.model_id = " My funny model ID CPU",
______4_model_name :_My_funny_model_ID_CPU
.model_id = " ",
______4_model_name :__
.model_id = "",
______4_model_name :_15/02
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1432050210-32036-1-git-send-email-prarit@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-01 10:06:57 +00:00
|
|
|
#include <linux/ctype.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <linux/delay.h>
|
2009-03-14 05:49:49 +00:00
|
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/init.h>
|
2014-04-17 08:17:12 +00:00
|
|
|
#include <linux/kprobes.h>
|
2009-03-14 05:49:49 +00:00
|
|
|
#include <linux/kgdb.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <linux/smp.h>
|
2009-03-14 05:49:49 +00:00
|
|
|
#include <linux/io.h>
|
|
|
|
|
|
|
|
#include <asm/stackprotector.h>
|
perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 10:02:48 +00:00
|
|
|
#include <asm/perf_event.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <asm/mmu_context.h>
|
2011-07-31 21:02:19 +00:00
|
|
|
#include <asm/archrandom.h>
|
2009-03-14 05:49:49 +00:00
|
|
|
#include <asm/hypervisor.h>
|
|
|
|
#include <asm/processor.h>
|
2014-10-24 22:58:08 +00:00
|
|
|
#include <asm/tlbflush.h>
|
2012-01-20 21:24:09 +00:00
|
|
|
#include <asm/debugreg.h>
|
2009-03-14 05:49:49 +00:00
|
|
|
#include <asm/sections.h>
|
2014-05-05 19:19:36 +00:00
|
|
|
#include <asm/vsyscall.h>
|
2009-07-03 23:35:45 +00:00
|
|
|
#include <linux/topology.h>
|
|
|
|
#include <linux/cpumask.h>
|
2009-03-14 05:49:49 +00:00
|
|
|
#include <asm/pgtable.h>
|
2011-07-26 23:09:06 +00:00
|
|
|
#include <linux/atomic.h>
|
2009-03-14 05:49:49 +00:00
|
|
|
#include <asm/proto.h>
|
|
|
|
#include <asm/setup.h>
|
|
|
|
#include <asm/apic.h>
|
|
|
|
#include <asm/desc.h>
|
2015-04-24 00:54:44 +00:00
|
|
|
#include <asm/fpu/internal.h>
|
2006-06-23 09:04:18 +00:00
|
|
|
#include <asm/mtrr.h>
|
2009-07-03 23:35:45 +00:00
|
|
|
#include <linux/numa.h>
|
2009-03-14 05:49:49 +00:00
|
|
|
#include <asm/asm.h>
|
|
|
|
#include <asm/cpu.h>
|
2006-06-23 09:04:20 +00:00
|
|
|
#include <asm/mce.h>
|
2009-03-14 05:49:49 +00:00
|
|
|
#include <asm/msr.h>
|
2008-05-08 07:18:43 +00:00
|
|
|
#include <asm/pat.h>
|
2012-12-21 07:44:23 +00:00
|
|
|
#include <asm/microcode.h>
|
|
|
|
#include <asm/microcode_intel.h>
|
2009-02-17 13:02:01 +00:00
|
|
|
|
|
|
|
#ifdef CONFIG_X86_LOCAL_APIC
|
2009-01-21 08:26:06 +00:00
|
|
|
#include <asm/uv/uv.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
#include "cpu.h"
|
|
|
|
|
2009-01-04 13:18:03 +00:00
|
|
|
/* all of these masks are initialized in setup_cpu_local_masks() */
|
|
|
|
cpumask_var_t cpu_initialized_mask;
|
2009-03-14 05:49:49 +00:00
|
|
|
cpumask_var_t cpu_callout_mask;
|
|
|
|
cpumask_var_t cpu_callin_mask;
|
2009-01-04 13:18:03 +00:00
|
|
|
|
|
|
|
/* representing cpus for which sibling maps can be computed */
|
|
|
|
cpumask_var_t cpu_sibling_setup_mask;
|
|
|
|
|
2009-01-27 03:56:47 +00:00
|
|
|
/* correctly size the local cpu masks */
|
2009-01-27 11:03:24 +00:00
|
|
|
void __init setup_cpu_local_masks(void)
|
2009-01-27 03:56:47 +00:00
|
|
|
{
|
|
|
|
alloc_bootmem_cpumask_var(&cpu_initialized_mask);
|
|
|
|
alloc_bootmem_cpumask_var(&cpu_callin_mask);
|
|
|
|
alloc_bootmem_cpumask_var(&cpu_callout_mask);
|
|
|
|
alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask);
|
|
|
|
}
|
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static void default_init(struct cpuinfo_x86 *c)
|
2009-08-11 18:00:11 +00:00
|
|
|
{
|
|
|
|
#ifdef CONFIG_X86_64
|
2009-11-21 13:01:45 +00:00
|
|
|
cpu_detect_cache_sizes(c);
|
2009-08-11 18:00:11 +00:00
|
|
|
#else
|
|
|
|
/* Not much we can do here... */
|
|
|
|
/* Check if at least it has cpuid */
|
|
|
|
if (c->cpuid_level == -1) {
|
|
|
|
/* No cpuid. It must be an ancient CPU */
|
|
|
|
if (c->x86 == 4)
|
|
|
|
strcpy(c->x86_model_id, "486");
|
|
|
|
else if (c->x86 == 3)
|
|
|
|
strcpy(c->x86_model_id, "386");
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static const struct cpu_dev default_cpu = {
|
2009-08-11 18:00:11 +00:00
|
|
|
.c_init = default_init,
|
|
|
|
.c_vendor = "Unknown",
|
|
|
|
.c_x86_vendor = X86_VENDOR_UNKNOWN,
|
|
|
|
};
|
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static const struct cpu_dev *this_cpu = &default_cpu;
|
2008-09-04 19:09:47 +00:00
|
|
|
|
2009-01-21 08:26:05 +00:00
|
|
|
DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
|
2008-09-05 03:09:01 +00:00
|
|
|
#ifdef CONFIG_X86_64
|
2009-01-21 08:26:05 +00:00
|
|
|
/*
|
|
|
|
* We need valid kernel segments for data and code in long mode too
|
|
|
|
* IRET will check the segment types kkeil 2000/10/28
|
|
|
|
* Also sysret mandates a special GDT layout
|
|
|
|
*
|
2009-03-14 05:49:49 +00:00
|
|
|
* TLS descriptors are currently at a different place compared to i386.
|
2009-01-21 08:26:05 +00:00
|
|
|
* Hopefully nobody expects them at a fixed place (Wine?)
|
|
|
|
*/
|
2009-07-18 15:12:20 +00:00
|
|
|
[GDT_ENTRY_KERNEL32_CS] = GDT_ENTRY_INIT(0xc09b, 0, 0xfffff),
|
|
|
|
[GDT_ENTRY_KERNEL_CS] = GDT_ENTRY_INIT(0xa09b, 0, 0xfffff),
|
|
|
|
[GDT_ENTRY_KERNEL_DS] = GDT_ENTRY_INIT(0xc093, 0, 0xfffff),
|
|
|
|
[GDT_ENTRY_DEFAULT_USER32_CS] = GDT_ENTRY_INIT(0xc0fb, 0, 0xfffff),
|
|
|
|
[GDT_ENTRY_DEFAULT_USER_DS] = GDT_ENTRY_INIT(0xc0f3, 0, 0xfffff),
|
|
|
|
[GDT_ENTRY_DEFAULT_USER_CS] = GDT_ENTRY_INIT(0xa0fb, 0, 0xfffff),
|
2008-09-05 03:09:01 +00:00
|
|
|
#else
|
2009-07-18 15:12:20 +00:00
|
|
|
[GDT_ENTRY_KERNEL_CS] = GDT_ENTRY_INIT(0xc09a, 0, 0xfffff),
|
|
|
|
[GDT_ENTRY_KERNEL_DS] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
|
|
|
|
[GDT_ENTRY_DEFAULT_USER_CS] = GDT_ENTRY_INIT(0xc0fa, 0, 0xfffff),
|
|
|
|
[GDT_ENTRY_DEFAULT_USER_DS] = GDT_ENTRY_INIT(0xc0f2, 0, 0xfffff),
|
2007-05-02 17:27:10 +00:00
|
|
|
/*
|
|
|
|
* Segments used for calling PnP BIOS have byte granularity.
|
|
|
|
* They code segments and data segments have fixed 64k limits,
|
|
|
|
* the transfer segment sizes are set at run time.
|
|
|
|
*/
|
2008-01-30 12:31:11 +00:00
|
|
|
/* 32-bit code */
|
2009-07-18 15:12:20 +00:00
|
|
|
[GDT_ENTRY_PNPBIOS_CS32] = GDT_ENTRY_INIT(0x409a, 0, 0xffff),
|
2008-01-30 12:31:11 +00:00
|
|
|
/* 16-bit code */
|
2009-07-18 15:12:20 +00:00
|
|
|
[GDT_ENTRY_PNPBIOS_CS16] = GDT_ENTRY_INIT(0x009a, 0, 0xffff),
|
2008-01-30 12:31:11 +00:00
|
|
|
/* 16-bit data */
|
2009-07-18 15:12:20 +00:00
|
|
|
[GDT_ENTRY_PNPBIOS_DS] = GDT_ENTRY_INIT(0x0092, 0, 0xffff),
|
2008-01-30 12:31:11 +00:00
|
|
|
/* 16-bit data */
|
2009-07-18 15:12:20 +00:00
|
|
|
[GDT_ENTRY_PNPBIOS_TS1] = GDT_ENTRY_INIT(0x0092, 0, 0),
|
2008-01-30 12:31:11 +00:00
|
|
|
/* 16-bit data */
|
2009-07-18 15:12:20 +00:00
|
|
|
[GDT_ENTRY_PNPBIOS_TS2] = GDT_ENTRY_INIT(0x0092, 0, 0),
|
2007-05-02 17:27:10 +00:00
|
|
|
/*
|
|
|
|
* The APM segments have byte granularity and their bases
|
|
|
|
* are set at run time. All have 64k limits.
|
|
|
|
*/
|
2008-01-30 12:31:11 +00:00
|
|
|
/* 32-bit code */
|
2009-07-18 15:12:20 +00:00
|
|
|
[GDT_ENTRY_APMBIOS_BASE] = GDT_ENTRY_INIT(0x409a, 0, 0xffff),
|
2007-05-02 17:27:10 +00:00
|
|
|
/* 16-bit code */
|
2009-07-18 15:12:20 +00:00
|
|
|
[GDT_ENTRY_APMBIOS_BASE+1] = GDT_ENTRY_INIT(0x009a, 0, 0xffff),
|
2008-01-30 12:31:11 +00:00
|
|
|
/* data */
|
2009-08-03 06:47:07 +00:00
|
|
|
[GDT_ENTRY_APMBIOS_BASE+2] = GDT_ENTRY_INIT(0x4092, 0, 0xffff),
|
2007-05-02 17:27:10 +00:00
|
|
|
|
2009-07-18 15:12:20 +00:00
|
|
|
[GDT_ENTRY_ESPFIX_SS] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
|
|
|
|
[GDT_ENTRY_PERCPU] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
|
2009-02-09 13:17:40 +00:00
|
|
|
GDT_STACK_CANARY_INIT
|
2008-09-05 03:09:01 +00:00
|
|
|
#endif
|
2009-01-21 08:26:05 +00:00
|
|
|
} };
|
2007-05-02 17:27:15 +00:00
|
|
|
EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
|
2007-05-02 17:27:10 +00:00
|
|
|
|
2015-06-07 18:37:02 +00:00
|
|
|
static int __init x86_mpx_setup(char *s)
|
2009-05-22 19:17:45 +00:00
|
|
|
{
|
2015-06-07 18:37:02 +00:00
|
|
|
/* require an exact match without trailing characters */
|
2014-11-11 22:01:33 +00:00
|
|
|
if (strlen(s))
|
|
|
|
return 0;
|
2009-05-22 19:17:45 +00:00
|
|
|
|
2015-06-07 18:37:02 +00:00
|
|
|
/* do not emit a message if the feature is not present */
|
|
|
|
if (!boot_cpu_has(X86_FEATURE_MPX))
|
|
|
|
return 1;
|
2010-07-19 23:05:52 +00:00
|
|
|
|
2015-06-07 18:37:02 +00:00
|
|
|
setup_clear_cpu_cap(X86_FEATURE_MPX);
|
|
|
|
pr_info("nompx: Intel Memory Protection Extensions (MPX) disabled\n");
|
2014-05-29 18:12:31 +00:00
|
|
|
return 1;
|
|
|
|
}
|
2015-06-07 18:37:02 +00:00
|
|
|
__setup("nompx", x86_mpx_setup);
|
2014-05-29 18:12:31 +00:00
|
|
|
|
2008-09-05 03:09:02 +00:00
|
|
|
#ifdef CONFIG_X86_32
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static int cachesize_override = -1;
|
|
|
|
static int disable_x86_serial_nr = 1;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-04 19:09:47 +00:00
|
|
|
static int __init cachesize_setup(char *str)
|
|
|
|
{
|
|
|
|
get_option(&str, &cachesize_override);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
__setup("cachesize=", cachesize_setup);
|
|
|
|
|
|
|
|
static int __init x86_sep_setup(char *s)
|
|
|
|
{
|
|
|
|
setup_clear_cpu_cap(X86_FEATURE_SEP);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
__setup("nosep", x86_sep_setup);
|
|
|
|
|
|
|
|
/* Standard macro to see if a specific flag is changeable */
|
|
|
|
static inline int flag_is_changeable_p(u32 flag)
|
|
|
|
{
|
|
|
|
u32 f1, f2;
|
|
|
|
|
2008-09-30 21:17:51 +00:00
|
|
|
/*
|
|
|
|
* Cyrix and IDT cpus allow disabling of CPUID
|
|
|
|
* so the code below may return different results
|
|
|
|
* when it is executed before and after enabling
|
|
|
|
* the CPUID. Add "volatile" to not allow gcc to
|
|
|
|
* optimize the subsequent calls to this function.
|
|
|
|
*/
|
2009-03-14 07:46:17 +00:00
|
|
|
asm volatile ("pushfl \n\t"
|
|
|
|
"pushfl \n\t"
|
|
|
|
"popl %0 \n\t"
|
|
|
|
"movl %0, %1 \n\t"
|
|
|
|
"xorl %2, %0 \n\t"
|
|
|
|
"pushl %0 \n\t"
|
|
|
|
"popfl \n\t"
|
|
|
|
"pushfl \n\t"
|
|
|
|
"popl %0 \n\t"
|
|
|
|
"popfl \n\t"
|
|
|
|
|
2008-09-30 21:17:51 +00:00
|
|
|
: "=&r" (f1), "=&r" (f2)
|
|
|
|
: "ir" (flag));
|
2008-09-04 19:09:47 +00:00
|
|
|
|
|
|
|
return ((f1^f2) & flag) != 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Probe for the CPUID instruction */
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
int have_cpuid_p(void)
|
2008-09-04 19:09:47 +00:00
|
|
|
{
|
|
|
|
return flag_is_changeable_p(X86_EFLAGS_ID);
|
|
|
|
}
|
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
|
2008-09-04 19:09:47 +00:00
|
|
|
{
|
2009-03-14 07:46:17 +00:00
|
|
|
unsigned long lo, hi;
|
|
|
|
|
|
|
|
if (!cpu_has(c, X86_FEATURE_PN) || !disable_x86_serial_nr)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* Disable processor serial number: */
|
|
|
|
|
|
|
|
rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
|
|
|
|
lo |= 0x200000;
|
|
|
|
wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
|
|
|
|
|
|
|
|
printk(KERN_NOTICE "CPU serial number disabled.\n");
|
|
|
|
clear_cpu_cap(c, X86_FEATURE_PN);
|
|
|
|
|
|
|
|
/* Disabling the serial number may affect the cpuid level */
|
|
|
|
c->cpuid_level = cpuid_eax(0);
|
2008-09-04 19:09:47 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int __init x86_serial_nr_setup(char *s)
|
|
|
|
{
|
|
|
|
disable_x86_serial_nr = 0;
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
__setup("serialnumber", x86_serial_nr_setup);
|
2008-09-05 03:09:02 +00:00
|
|
|
#else
|
2008-09-05 03:09:13 +00:00
|
|
|
static inline int flag_is_changeable_p(u32 flag)
|
|
|
|
{
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
|
|
|
|
{
|
|
|
|
}
|
2008-09-05 03:09:02 +00:00
|
|
|
#endif
|
2008-09-04 19:09:47 +00:00
|
|
|
|
2011-05-11 23:51:05 +00:00
|
|
|
static __init int setup_disable_smep(char *arg)
|
|
|
|
{
|
2012-09-27 01:02:28 +00:00
|
|
|
setup_clear_cpu_cap(X86_FEATURE_SMEP);
|
2011-05-11 23:51:05 +00:00
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
__setup("nosmep", setup_disable_smep);
|
|
|
|
|
2012-09-27 01:02:28 +00:00
|
|
|
static __always_inline void setup_smep(struct cpuinfo_x86 *c)
|
2011-05-11 23:51:05 +00:00
|
|
|
{
|
2012-09-27 01:02:28 +00:00
|
|
|
if (cpu_has(c, X86_FEATURE_SMEP))
|
2014-10-24 22:58:07 +00:00
|
|
|
cr4_set_bits(X86_CR4_SMEP);
|
2011-05-11 23:51:05 +00:00
|
|
|
}
|
|
|
|
|
2012-09-21 19:43:13 +00:00
|
|
|
static __init int setup_disable_smap(char *arg)
|
|
|
|
{
|
2012-09-27 01:02:28 +00:00
|
|
|
setup_clear_cpu_cap(X86_FEATURE_SMAP);
|
2012-09-21 19:43:13 +00:00
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
__setup("nosmap", setup_disable_smap);
|
|
|
|
|
2012-09-27 01:02:28 +00:00
|
|
|
static __always_inline void setup_smap(struct cpuinfo_x86 *c)
|
|
|
|
{
|
|
|
|
unsigned long eflags;
|
|
|
|
|
|
|
|
/* This should have been cleared long ago */
|
|
|
|
raw_local_save_flags(eflags);
|
|
|
|
BUG_ON(eflags & X86_EFLAGS_AC);
|
|
|
|
|
2014-02-13 15:34:30 +00:00
|
|
|
if (cpu_has(c, X86_FEATURE_SMAP)) {
|
|
|
|
#ifdef CONFIG_X86_SMAP
|
2014-10-24 22:58:07 +00:00
|
|
|
cr4_set_bits(X86_CR4_SMAP);
|
2014-02-13 15:34:30 +00:00
|
|
|
#else
|
2014-10-24 22:58:07 +00:00
|
|
|
cr4_clear_bits(X86_CR4_SMAP);
|
2014-02-13 15:34:30 +00:00
|
|
|
#endif
|
|
|
|
}
|
2011-05-11 23:51:05 +00:00
|
|
|
}
|
|
|
|
|
2009-01-24 01:20:50 +00:00
|
|
|
/*
|
|
|
|
* Some CPU features depend on higher CPUID levels, which may not always
|
|
|
|
* be available due to CPUID level capping or broken virtualization
|
|
|
|
* software. Add those features to this table to auto-disable them.
|
|
|
|
*/
|
|
|
|
struct cpuid_dependent_feature {
|
|
|
|
u32 feature;
|
|
|
|
u32 level;
|
|
|
|
};
|
2009-03-14 07:46:17 +00:00
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static const struct cpuid_dependent_feature
|
2009-01-24 01:20:50 +00:00
|
|
|
cpuid_dependent_features[] = {
|
|
|
|
{ X86_FEATURE_MWAIT, 0x00000005 },
|
|
|
|
{ X86_FEATURE_DCA, 0x00000009 },
|
|
|
|
{ X86_FEATURE_XSAVE, 0x0000000d },
|
|
|
|
{ 0, 0 }
|
|
|
|
};
|
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static void filter_cpuid_features(struct cpuinfo_x86 *c, bool warn)
|
2009-01-24 01:20:50 +00:00
|
|
|
{
|
|
|
|
const struct cpuid_dependent_feature *df;
|
2009-03-14 05:49:49 +00:00
|
|
|
|
2009-01-24 01:20:50 +00:00
|
|
|
for (df = cpuid_dependent_features; df->feature; df++) {
|
2009-03-14 07:46:17 +00:00
|
|
|
|
|
|
|
if (!cpu_has(c, df->feature))
|
|
|
|
continue;
|
2009-01-24 01:20:50 +00:00
|
|
|
/*
|
|
|
|
* Note: cpuid_level is set to -1 if unavailable, but
|
|
|
|
* extended_extended_level is set to 0 if unavailable
|
|
|
|
* and the legitimate extended levels are all negative
|
|
|
|
* when signed; hence the weird messing around with
|
|
|
|
* signs here...
|
|
|
|
*/
|
2009-03-14 07:46:17 +00:00
|
|
|
if (!((s32)df->level < 0 ?
|
2009-02-15 07:59:18 +00:00
|
|
|
(u32)df->level > (u32)c->extended_cpuid_level :
|
2009-03-14 07:46:17 +00:00
|
|
|
(s32)df->level > (s32)c->cpuid_level))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
clear_cpu_cap(c, df->feature);
|
|
|
|
if (!warn)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
printk(KERN_WARNING
|
2013-10-30 15:09:45 +00:00
|
|
|
"CPU: CPU feature " X86_CAP_FMT " disabled, no CPUID level 0x%x\n",
|
|
|
|
x86_cap_flag(df->feature), df->level);
|
2009-01-24 01:20:50 +00:00
|
|
|
}
|
2009-02-15 07:59:18 +00:00
|
|
|
}
|
2009-01-24 01:20:50 +00:00
|
|
|
|
2008-09-05 03:09:13 +00:00
|
|
|
/*
|
|
|
|
* Naming convention should be: <Name> [(<Codename>)]
|
|
|
|
* This table only is used unless init_<vendor>() below doesn't set it;
|
2009-03-14 07:46:17 +00:00
|
|
|
* in particular, if CPUID levels 0x80000002..4 are supported, this
|
|
|
|
* isn't used
|
2008-09-05 03:09:13 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
/* Look up CPU names by table lookup. */
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static const char *table_lookup_model(struct cpuinfo_x86 *c)
|
2008-09-05 03:09:13 +00:00
|
|
|
{
|
2013-10-21 08:35:20 +00:00
|
|
|
#ifdef CONFIG_X86_32
|
|
|
|
const struct legacy_cpu_model_info *info;
|
2008-09-05 03:09:13 +00:00
|
|
|
|
|
|
|
if (c->x86_model >= 16)
|
|
|
|
return NULL; /* Range check */
|
|
|
|
|
|
|
|
if (!this_cpu)
|
|
|
|
return NULL;
|
|
|
|
|
2013-10-21 08:35:20 +00:00
|
|
|
info = this_cpu->legacy_models;
|
2008-09-05 03:09:13 +00:00
|
|
|
|
2013-10-21 08:35:20 +00:00
|
|
|
while (info->family) {
|
2008-09-05 03:09:13 +00:00
|
|
|
if (info->family == c->x86)
|
|
|
|
return info->model_names[c->x86_model];
|
|
|
|
info++;
|
|
|
|
}
|
2013-10-21 08:35:20 +00:00
|
|
|
#endif
|
2008-09-05 03:09:13 +00:00
|
|
|
return NULL; /* Not found */
|
|
|
|
}
|
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
__u32 cpu_caps_cleared[NCAPINTS];
|
|
|
|
__u32 cpu_caps_set[NCAPINTS];
|
2008-01-30 12:33:20 +00:00
|
|
|
|
2009-01-30 08:47:54 +00:00
|
|
|
void load_percpu_segment(int cpu)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_X86_32
|
|
|
|
loadsegment(fs, __KERNEL_PERCPU);
|
|
|
|
#else
|
|
|
|
loadsegment(gs, 0);
|
|
|
|
wrmsrl(MSR_GS_BASE, (unsigned long)per_cpu(irq_stack_union.gs_base, cpu));
|
|
|
|
#endif
|
2009-02-09 13:17:40 +00:00
|
|
|
load_stack_canary_segment();
|
2009-01-30 08:47:54 +00:00
|
|
|
}
|
|
|
|
|
2009-03-14 07:46:17 +00:00
|
|
|
/*
|
|
|
|
* Current gdt points %fs at the "master" per-cpu area: after this,
|
|
|
|
* it's on the real one.
|
|
|
|
*/
|
2009-01-30 08:47:53 +00:00
|
|
|
void switch_to_new_gdt(int cpu)
|
2008-09-04 19:09:44 +00:00
|
|
|
{
|
|
|
|
struct desc_ptr gdt_descr;
|
|
|
|
|
2009-01-27 03:56:48 +00:00
|
|
|
gdt_descr.address = (long)get_cpu_gdt_table(cpu);
|
2008-09-04 19:09:44 +00:00
|
|
|
gdt_descr.size = GDT_SIZE - 1;
|
|
|
|
load_gdt(&gdt_descr);
|
2009-01-27 03:56:48 +00:00
|
|
|
/* Reload the per-cpu base */
|
2009-01-30 08:47:54 +00:00
|
|
|
|
|
|
|
load_percpu_segment(cpu);
|
2008-09-04 19:09:44 +00:00
|
|
|
}
|
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static const struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
|
2005-04-16 22:20:36 +00:00
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static void get_model_name(struct cpuinfo_x86 *c)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
unsigned int *v;
|
x86/cpu: Trim model ID whitespace
We did try trimming whitespace surrounding the 'model name'
field in /proc/cpuinfo since reportedly some userspace uses it
in string comparisons and there were discrepancies:
[thetango@prarit ~]# grep "^model name" /proc/cpuinfo | uniq -c | sed 's/\ /_/g'
______1_model_name :_AMD_Opteron(TM)_Processor_6272
_____63_model_name :_AMD_Opteron(TM)_Processor_6272_________________
However, there were issues with overlapping buffers, string
sizes and non-byte-sized copies in the previous proposed
solutions; see Link tags below for the whole farce.
So, instead of diddling with this more, let's simply extend what
was there originally with trimming any present trailing
whitespace. Final result is really simple and obvious.
Testing with the most insane model IDs qemu can generate, looks
good:
.model_id = " My funny model ID CPU ",
______4_model_name :_My_funny_model_ID_CPU
.model_id = "My funny model ID CPU ",
______4_model_name :_My_funny_model_ID_CPU
.model_id = " My funny model ID CPU",
______4_model_name :_My_funny_model_ID_CPU
.model_id = " ",
______4_model_name :__
.model_id = "",
______4_model_name :_15/02
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1432050210-32036-1-git-send-email-prarit@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-01 10:06:57 +00:00
|
|
|
char *p, *q, *s;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-04 19:09:44 +00:00
|
|
|
if (c->extended_cpuid_level < 0x80000004)
|
2008-09-06 08:52:27 +00:00
|
|
|
return;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2009-03-14 07:46:17 +00:00
|
|
|
v = (unsigned int *)c->x86_model_id;
|
2005-04-16 22:20:36 +00:00
|
|
|
cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
|
|
|
|
cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
|
|
|
|
cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
|
|
|
|
c->x86_model_id[48] = 0;
|
|
|
|
|
x86/cpu: Trim model ID whitespace
We did try trimming whitespace surrounding the 'model name'
field in /proc/cpuinfo since reportedly some userspace uses it
in string comparisons and there were discrepancies:
[thetango@prarit ~]# grep "^model name" /proc/cpuinfo | uniq -c | sed 's/\ /_/g'
______1_model_name :_AMD_Opteron(TM)_Processor_6272
_____63_model_name :_AMD_Opteron(TM)_Processor_6272_________________
However, there were issues with overlapping buffers, string
sizes and non-byte-sized copies in the previous proposed
solutions; see Link tags below for the whole farce.
So, instead of diddling with this more, let's simply extend what
was there originally with trimming any present trailing
whitespace. Final result is really simple and obvious.
Testing with the most insane model IDs qemu can generate, looks
good:
.model_id = " My funny model ID CPU ",
______4_model_name :_My_funny_model_ID_CPU
.model_id = "My funny model ID CPU ",
______4_model_name :_My_funny_model_ID_CPU
.model_id = " My funny model ID CPU",
______4_model_name :_My_funny_model_ID_CPU
.model_id = " ",
______4_model_name :__
.model_id = "",
______4_model_name :_15/02
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1432050210-32036-1-git-send-email-prarit@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-01 10:06:57 +00:00
|
|
|
/* Trim whitespace */
|
|
|
|
p = q = s = &c->x86_model_id[0];
|
|
|
|
|
|
|
|
while (*p == ' ')
|
|
|
|
p++;
|
|
|
|
|
|
|
|
while (*p) {
|
|
|
|
/* Note the last non-whitespace index */
|
|
|
|
if (!isspace(*p))
|
|
|
|
s = q;
|
|
|
|
|
|
|
|
*q++ = *p++;
|
|
|
|
}
|
|
|
|
|
|
|
|
*(s + 1) = '\0';
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
void cpu_detect_cache_sizes(struct cpuinfo_x86 *c)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2008-09-04 19:09:44 +00:00
|
|
|
unsigned int n, dummy, ebx, ecx, edx, l2size;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-04 19:09:44 +00:00
|
|
|
n = c->extended_cpuid_level;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
if (n >= 0x80000005) {
|
2008-09-04 19:09:44 +00:00
|
|
|
cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
|
|
|
|
c->x86_cache_size = (ecx>>24) + (edx>>24);
|
2008-09-05 03:09:07 +00:00
|
|
|
#ifdef CONFIG_X86_64
|
|
|
|
/* On K8 L1 TLB is inclusive, so don't count it */
|
|
|
|
c->x86_tlbsize = 0;
|
|
|
|
#endif
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (n < 0x80000006) /* Some chips just has a large L1. */
|
|
|
|
return;
|
|
|
|
|
2008-09-04 19:09:47 +00:00
|
|
|
cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
|
2005-04-16 22:20:36 +00:00
|
|
|
l2size = ecx >> 16;
|
2008-02-24 10:58:13 +00:00
|
|
|
|
2008-09-05 03:09:07 +00:00
|
|
|
#ifdef CONFIG_X86_64
|
|
|
|
c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
|
|
|
|
#else
|
2005-04-16 22:20:36 +00:00
|
|
|
/* do processor-specific cache resizing */
|
2013-10-21 08:35:20 +00:00
|
|
|
if (this_cpu->legacy_cache_size)
|
|
|
|
l2size = this_cpu->legacy_cache_size(c, l2size);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* Allow user to override all this if necessary. */
|
|
|
|
if (cachesize_override != -1)
|
|
|
|
l2size = cachesize_override;
|
|
|
|
|
2008-02-24 10:58:13 +00:00
|
|
|
if (l2size == 0)
|
2005-04-16 22:20:36 +00:00
|
|
|
return; /* Again, no L2 cache is possible */
|
2008-09-05 03:09:07 +00:00
|
|
|
#endif
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
c->x86_cache_size = l2size;
|
|
|
|
}
|
|
|
|
|
x86/tlb_info: get last level TLB entry number of CPU
For 4KB pages, x86 CPU has 2 or 1 level TLB, first level is data TLB and
instruction TLB, second level is shared TLB for both data and instructions.
For hupe page TLB, usually there is just one level and seperated by 2MB/4MB
and 1GB.
Although each levels TLB size is important for performance tuning, but for
genernal and rude optimizing, last level TLB entry number is suitable. And
in fact, last level TLB always has the biggest entry number.
This patch will get the biggest TLB entry number and use it in furture TLB
optimizing.
Accroding Borislav's suggestion, except tlb_ll[i/d]_* array, other
function and data will be released after system boot up.
For all kinds of x86 vendor friendly, vendor specific code was moved to its
specific files.
Signed-off-by: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1340845344-27557-2-git-send-email-alex.shi@intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-06-28 01:02:16 +00:00
|
|
|
u16 __read_mostly tlb_lli_4k[NR_INFO];
|
|
|
|
u16 __read_mostly tlb_lli_2m[NR_INFO];
|
|
|
|
u16 __read_mostly tlb_lli_4m[NR_INFO];
|
|
|
|
u16 __read_mostly tlb_lld_4k[NR_INFO];
|
|
|
|
u16 __read_mostly tlb_lld_2m[NR_INFO];
|
|
|
|
u16 __read_mostly tlb_lld_4m[NR_INFO];
|
x86, cpu: Detect more TLB configuration
The Intel Software Developer’s Manual covers few more TLB
configurations exposed as CPUID 2 descriptors:
61H Instruction TLB: 4 KByte pages, fully associative, 48 entries
63H Data TLB: 1 GByte pages, 4-way set associative, 4 entries
76H Instruction TLB: 2M/4M pages, fully associative, 8 entries
B5H Instruction TLB: 4KByte pages, 8-way set associative, 64 entries
B6H Instruction TLB: 4KByte pages, 8-way set associative, 128 entries
C1H Shared 2nd-Level TLB: 4 KByte/2MByte pages, 8-way associative, 1024 entries
C2H DTLB DTLB: 2 MByte/$MByte pages, 4-way associative, 16 entries
Let's detect them as well.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/1387801018-14499-1-git-send-email-kirill.shutemov@linux.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-12-23 12:16:58 +00:00
|
|
|
u16 __read_mostly tlb_lld_1g[NR_INFO];
|
x86/tlb_info: get last level TLB entry number of CPU
For 4KB pages, x86 CPU has 2 or 1 level TLB, first level is data TLB and
instruction TLB, second level is shared TLB for both data and instructions.
For hupe page TLB, usually there is just one level and seperated by 2MB/4MB
and 1GB.
Although each levels TLB size is important for performance tuning, but for
genernal and rude optimizing, last level TLB entry number is suitable. And
in fact, last level TLB always has the biggest entry number.
This patch will get the biggest TLB entry number and use it in furture TLB
optimizing.
Accroding Borislav's suggestion, except tlb_ll[i/d]_* array, other
function and data will be released after system boot up.
For all kinds of x86 vendor friendly, vendor specific code was moved to its
specific files.
Signed-off-by: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1340845344-27557-2-git-send-email-alex.shi@intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-06-28 01:02:16 +00:00
|
|
|
|
x86, CPU: Fix trivial printk formatting issues with dmesg
dmesg (from util-linux) currently has two methods for reading the kernel
message ring buffer: /dev/kmsg and syslog(2). Since kernel 3.5.0 kmsg
has been the default, which escapes control characters (e.g. new lines)
before they are shown.
This change means that when dmesg is using /dev/kmsg, a 2 line printk
makes the output messy, because the second line does not get a
timestamp.
For example:
[ 0.012863] CPU0: Thermal monitoring enabled (TM1)
[ 0.012869] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.012958] Freeing SMP alternatives memory: 28K (ffffffff81d86000 - ffffffff81d8d000)
[ 0.014961] dmar: Host address width 39
Because printk.c intentionally escapes control characters, they should
not be there in the first place. This patch fixes two occurrences of
this.
Signed-off-by: Steven Honeyman <stevenhoneyman@gmail.com>
Link: https://lkml.kernel.org/r/1414856696-8094-1-git-send-email-stevenhoneyman@gmail.com
[ Boris: make cpu_detect_tlb() static, while at it. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-11-05 22:52:18 +00:00
|
|
|
static void cpu_detect_tlb(struct cpuinfo_x86 *c)
|
x86/tlb_info: get last level TLB entry number of CPU
For 4KB pages, x86 CPU has 2 or 1 level TLB, first level is data TLB and
instruction TLB, second level is shared TLB for both data and instructions.
For hupe page TLB, usually there is just one level and seperated by 2MB/4MB
and 1GB.
Although each levels TLB size is important for performance tuning, but for
genernal and rude optimizing, last level TLB entry number is suitable. And
in fact, last level TLB always has the biggest entry number.
This patch will get the biggest TLB entry number and use it in furture TLB
optimizing.
Accroding Borislav's suggestion, except tlb_ll[i/d]_* array, other
function and data will be released after system boot up.
For all kinds of x86 vendor friendly, vendor specific code was moved to its
specific files.
Signed-off-by: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1340845344-27557-2-git-send-email-alex.shi@intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-06-28 01:02:16 +00:00
|
|
|
{
|
|
|
|
if (this_cpu->c_detect_tlb)
|
|
|
|
this_cpu->c_detect_tlb(c);
|
|
|
|
|
x86, CPU: Fix trivial printk formatting issues with dmesg
dmesg (from util-linux) currently has two methods for reading the kernel
message ring buffer: /dev/kmsg and syslog(2). Since kernel 3.5.0 kmsg
has been the default, which escapes control characters (e.g. new lines)
before they are shown.
This change means that when dmesg is using /dev/kmsg, a 2 line printk
makes the output messy, because the second line does not get a
timestamp.
For example:
[ 0.012863] CPU0: Thermal monitoring enabled (TM1)
[ 0.012869] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.012958] Freeing SMP alternatives memory: 28K (ffffffff81d86000 - ffffffff81d8d000)
[ 0.014961] dmar: Host address width 39
Because printk.c intentionally escapes control characters, they should
not be there in the first place. This patch fixes two occurrences of
this.
Signed-off-by: Steven Honeyman <stevenhoneyman@gmail.com>
Link: https://lkml.kernel.org/r/1414856696-8094-1-git-send-email-stevenhoneyman@gmail.com
[ Boris: make cpu_detect_tlb() static, while at it. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-11-05 22:52:18 +00:00
|
|
|
pr_info("Last level iTLB entries: 4KB %d, 2MB %d, 4MB %d\n",
|
x86/tlb_info: get last level TLB entry number of CPU
For 4KB pages, x86 CPU has 2 or 1 level TLB, first level is data TLB and
instruction TLB, second level is shared TLB for both data and instructions.
For hupe page TLB, usually there is just one level and seperated by 2MB/4MB
and 1GB.
Although each levels TLB size is important for performance tuning, but for
genernal and rude optimizing, last level TLB entry number is suitable. And
in fact, last level TLB always has the biggest entry number.
This patch will get the biggest TLB entry number and use it in furture TLB
optimizing.
Accroding Borislav's suggestion, except tlb_ll[i/d]_* array, other
function and data will be released after system boot up.
For all kinds of x86 vendor friendly, vendor specific code was moved to its
specific files.
Signed-off-by: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1340845344-27557-2-git-send-email-alex.shi@intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-06-28 01:02:16 +00:00
|
|
|
tlb_lli_4k[ENTRIES], tlb_lli_2m[ENTRIES],
|
x86, CPU: Fix trivial printk formatting issues with dmesg
dmesg (from util-linux) currently has two methods for reading the kernel
message ring buffer: /dev/kmsg and syslog(2). Since kernel 3.5.0 kmsg
has been the default, which escapes control characters (e.g. new lines)
before they are shown.
This change means that when dmesg is using /dev/kmsg, a 2 line printk
makes the output messy, because the second line does not get a
timestamp.
For example:
[ 0.012863] CPU0: Thermal monitoring enabled (TM1)
[ 0.012869] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.012958] Freeing SMP alternatives memory: 28K (ffffffff81d86000 - ffffffff81d8d000)
[ 0.014961] dmar: Host address width 39
Because printk.c intentionally escapes control characters, they should
not be there in the first place. This patch fixes two occurrences of
this.
Signed-off-by: Steven Honeyman <stevenhoneyman@gmail.com>
Link: https://lkml.kernel.org/r/1414856696-8094-1-git-send-email-stevenhoneyman@gmail.com
[ Boris: make cpu_detect_tlb() static, while at it. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-11-05 22:52:18 +00:00
|
|
|
tlb_lli_4m[ENTRIES]);
|
|
|
|
|
|
|
|
pr_info("Last level dTLB entries: 4KB %d, 2MB %d, 4MB %d, 1GB %d\n",
|
|
|
|
tlb_lld_4k[ENTRIES], tlb_lld_2m[ENTRIES],
|
|
|
|
tlb_lld_4m[ENTRIES], tlb_lld_1g[ENTRIES]);
|
x86/tlb_info: get last level TLB entry number of CPU
For 4KB pages, x86 CPU has 2 or 1 level TLB, first level is data TLB and
instruction TLB, second level is shared TLB for both data and instructions.
For hupe page TLB, usually there is just one level and seperated by 2MB/4MB
and 1GB.
Although each levels TLB size is important for performance tuning, but for
genernal and rude optimizing, last level TLB entry number is suitable. And
in fact, last level TLB always has the biggest entry number.
This patch will get the biggest TLB entry number and use it in furture TLB
optimizing.
Accroding Borislav's suggestion, except tlb_ll[i/d]_* array, other
function and data will be released after system boot up.
For all kinds of x86 vendor friendly, vendor specific code was moved to its
specific files.
Signed-off-by: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1340845344-27557-2-git-send-email-alex.shi@intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-06-28 01:02:16 +00:00
|
|
|
}
|
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
void detect_ht(struct cpuinfo_x86 *c)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2015-06-04 16:55:25 +00:00
|
|
|
#ifdef CONFIG_SMP
|
2008-09-04 19:09:47 +00:00
|
|
|
u32 eax, ebx, ecx, edx;
|
|
|
|
int index_msb, core_bits;
|
2009-12-11 01:19:36 +00:00
|
|
|
static bool printed;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-04 19:09:47 +00:00
|
|
|
if (!cpu_has(c, X86_FEATURE_HT))
|
2008-09-04 19:09:44 +00:00
|
|
|
return;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-04 19:09:47 +00:00
|
|
|
if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
|
|
|
|
goto out;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-05 03:09:08 +00:00
|
|
|
if (cpu_has(c, X86_FEATURE_XTOPOLOGY))
|
|
|
|
return;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-04 19:09:47 +00:00
|
|
|
cpuid(1, &eax, &ebx, &ecx, &edx);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-04 19:09:44 +00:00
|
|
|
smp_num_siblings = (ebx & 0xff0000) >> 16;
|
|
|
|
|
|
|
|
if (smp_num_siblings == 1) {
|
2009-12-11 01:19:36 +00:00
|
|
|
printk_once(KERN_INFO "CPU0: Hyper-Threading is disabled\n");
|
2009-03-14 07:46:17 +00:00
|
|
|
goto out;
|
|
|
|
}
|
2008-09-04 19:09:44 +00:00
|
|
|
|
2009-03-14 07:46:17 +00:00
|
|
|
if (smp_num_siblings <= 1)
|
|
|
|
goto out;
|
2008-09-04 19:09:44 +00:00
|
|
|
|
2009-03-14 07:46:17 +00:00
|
|
|
index_msb = get_count_order(smp_num_siblings);
|
|
|
|
c->phys_proc_id = apic->phys_pkg_id(c->initial_apicid, index_msb);
|
2008-09-04 19:09:44 +00:00
|
|
|
|
2009-03-14 07:46:17 +00:00
|
|
|
smp_num_siblings = smp_num_siblings / c->x86_max_cores;
|
2008-09-04 19:09:44 +00:00
|
|
|
|
2009-03-14 07:46:17 +00:00
|
|
|
index_msb = get_count_order(smp_num_siblings);
|
2008-09-04 19:09:44 +00:00
|
|
|
|
2009-03-14 07:46:17 +00:00
|
|
|
core_bits = get_count_order(c->x86_max_cores);
|
2008-09-04 19:09:44 +00:00
|
|
|
|
2009-03-14 07:46:17 +00:00
|
|
|
c->cpu_core_id = apic->phys_pkg_id(c->initial_apicid, index_msb) &
|
|
|
|
((1 << core_bits) - 1);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-04 19:09:47 +00:00
|
|
|
out:
|
2009-12-11 01:19:36 +00:00
|
|
|
if (!printed && (c->x86_max_cores * smp_num_siblings) > 1) {
|
2008-09-04 19:09:47 +00:00
|
|
|
printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
|
|
|
|
c->phys_proc_id);
|
|
|
|
printk(KERN_INFO "CPU: Processor Core ID: %d\n",
|
|
|
|
c->cpu_core_id);
|
2009-12-11 01:19:36 +00:00
|
|
|
printed = 1;
|
2008-09-04 19:09:44 +00:00
|
|
|
}
|
|
|
|
#endif
|
2008-09-05 03:08:59 +00:00
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static void get_cpu_vendor(struct cpuinfo_x86 *c)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
char *v = c->x86_vendor_id;
|
2009-03-14 07:46:17 +00:00
|
|
|
int i;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
for (i = 0; i < X86_VENDOR_NUM; i++) {
|
2008-09-04 19:09:45 +00:00
|
|
|
if (!cpu_devs[i])
|
|
|
|
break;
|
|
|
|
|
|
|
|
if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
|
|
|
|
(cpu_devs[i]->c_ident[1] &&
|
|
|
|
!strcmp(v, cpu_devs[i]->c_ident[1]))) {
|
2009-03-14 07:46:17 +00:00
|
|
|
|
2008-09-04 19:09:45 +00:00
|
|
|
this_cpu = cpu_devs[i];
|
|
|
|
c->x86_vendor = this_cpu->c_x86_vendor;
|
|
|
|
return;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
}
|
2008-09-04 19:09:45 +00:00
|
|
|
|
2009-06-16 22:33:44 +00:00
|
|
|
printk_once(KERN_ERR
|
|
|
|
"CPU: vendor_id '%s' unknown, using generic init.\n" \
|
|
|
|
"CPU: Your system may be unstable.\n", v);
|
2008-09-04 19:09:45 +00:00
|
|
|
|
2006-02-05 07:28:03 +00:00
|
|
|
c->x86_vendor = X86_VENDOR_UNKNOWN;
|
|
|
|
this_cpu = &default_cpu;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
void cpu_detect(struct cpuinfo_x86 *c)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
/* Get vendor name */
|
2008-02-01 16:49:43 +00:00
|
|
|
cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
|
|
|
|
(unsigned int *)&c->x86_vendor_id[0],
|
|
|
|
(unsigned int *)&c->x86_vendor_id[8],
|
|
|
|
(unsigned int *)&c->x86_vendor_id[4]);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
c->x86 = 4;
|
2008-09-04 19:09:44 +00:00
|
|
|
/* Intel-defined flags: level 0x00000001 */
|
2005-04-16 22:20:36 +00:00
|
|
|
if (c->cpuid_level >= 0x00000001) {
|
|
|
|
u32 junk, tfms, cap0, misc;
|
2009-03-14 07:46:17 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
|
2008-09-04 19:09:44 +00:00
|
|
|
c->x86 = (tfms >> 8) & 0xf;
|
|
|
|
c->x86_model = (tfms >> 4) & 0xf;
|
|
|
|
c->x86_mask = tfms & 0xf;
|
2009-03-14 07:46:17 +00:00
|
|
|
|
2005-11-05 16:25:53 +00:00
|
|
|
if (c->x86 == 0xf)
|
2005-04-16 22:20:36 +00:00
|
|
|
c->x86 += (tfms >> 20) & 0xff;
|
2005-11-05 16:25:53 +00:00
|
|
|
if (c->x86 >= 0x6)
|
2008-09-04 19:09:44 +00:00
|
|
|
c->x86_model += ((tfms >> 16) & 0xf) << 4;
|
2009-03-14 07:46:17 +00:00
|
|
|
|
2008-01-31 21:05:45 +00:00
|
|
|
if (cap0 & (1<<19)) {
|
|
|
|
c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
|
2008-09-04 19:09:44 +00:00
|
|
|
c->x86_cache_alignment = c->x86_clflush_size;
|
2008-01-31 21:05:45 +00:00
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
}
|
2008-09-04 19:09:44 +00:00
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
void get_cpu_cap(struct cpuinfo_x86 *c)
|
2008-01-30 12:33:32 +00:00
|
|
|
{
|
|
|
|
u32 tfms, xlvl;
|
2008-09-04 19:09:44 +00:00
|
|
|
u32 ebx;
|
2008-01-30 12:33:32 +00:00
|
|
|
|
2008-09-04 19:09:44 +00:00
|
|
|
/* Intel-defined flags: level 0x00000001 */
|
|
|
|
if (c->cpuid_level >= 0x00000001) {
|
|
|
|
u32 capability, excap;
|
2009-03-14 07:46:17 +00:00
|
|
|
|
2008-09-04 19:09:44 +00:00
|
|
|
cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
|
|
|
|
c->x86_capability[0] = capability;
|
|
|
|
c->x86_capability[4] = excap;
|
|
|
|
}
|
2008-01-30 12:33:32 +00:00
|
|
|
|
2010-07-08 00:29:18 +00:00
|
|
|
/* Additional Intel-defined flags: level 0x00000007 */
|
|
|
|
if (c->cpuid_level >= 0x00000007) {
|
|
|
|
u32 eax, ebx, ecx, edx;
|
|
|
|
|
|
|
|
cpuid_count(0x00000007, 0, &eax, &ebx, &ecx, &edx);
|
|
|
|
|
2011-05-17 19:33:26 +00:00
|
|
|
c->x86_capability[9] = ebx;
|
2010-07-08 00:29:18 +00:00
|
|
|
}
|
|
|
|
|
2014-05-29 18:12:30 +00:00
|
|
|
/* Extended state features: level 0x0000000d */
|
|
|
|
if (c->cpuid_level >= 0x0000000d) {
|
|
|
|
u32 eax, ebx, ecx, edx;
|
|
|
|
|
|
|
|
cpuid_count(0x0000000d, 1, &eax, &ebx, &ecx, &edx);
|
|
|
|
|
|
|
|
c->x86_capability[10] = eax;
|
|
|
|
}
|
|
|
|
|
2015-01-23 18:45:43 +00:00
|
|
|
/* Additional Intel-defined flags: level 0x0000000F */
|
|
|
|
if (c->cpuid_level >= 0x0000000F) {
|
|
|
|
u32 eax, ebx, ecx, edx;
|
|
|
|
|
|
|
|
/* QoS sub-leaf, EAX=0Fh, ECX=0 */
|
|
|
|
cpuid_count(0x0000000F, 0, &eax, &ebx, &ecx, &edx);
|
|
|
|
c->x86_capability[11] = edx;
|
|
|
|
if (cpu_has(c, X86_FEATURE_CQM_LLC)) {
|
|
|
|
/* will be overridden if occupancy monitoring exists */
|
|
|
|
c->x86_cache_max_rmid = ebx;
|
|
|
|
|
|
|
|
/* QoS sub-leaf, EAX=0Fh, ECX=1 */
|
|
|
|
cpuid_count(0x0000000F, 1, &eax, &ebx, &ecx, &edx);
|
|
|
|
c->x86_capability[12] = edx;
|
|
|
|
if (cpu_has(c, X86_FEATURE_CQM_OCCUP_LLC)) {
|
|
|
|
c->x86_cache_max_rmid = ecx;
|
|
|
|
c->x86_cache_occ_scale = ebx;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
c->x86_cache_max_rmid = -1;
|
|
|
|
c->x86_cache_occ_scale = -1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2008-09-04 19:09:44 +00:00
|
|
|
/* AMD-defined flags: level 0x80000001 */
|
|
|
|
xlvl = cpuid_eax(0x80000000);
|
|
|
|
c->extended_cpuid_level = xlvl;
|
2009-03-14 07:46:17 +00:00
|
|
|
|
2008-09-04 19:09:44 +00:00
|
|
|
if ((xlvl & 0xffff0000) == 0x80000000) {
|
|
|
|
if (xlvl >= 0x80000001) {
|
|
|
|
c->x86_capability[1] = cpuid_edx(0x80000001);
|
|
|
|
c->x86_capability[6] = cpuid_ecx(0x80000001);
|
2008-01-30 12:33:32 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2008-09-05 03:09:09 +00:00
|
|
|
if (c->extended_cpuid_level >= 0x80000008) {
|
|
|
|
u32 eax = cpuid_eax(0x80000008);
|
|
|
|
|
|
|
|
c->x86_virt_bits = (eax >> 8) & 0xff;
|
|
|
|
c->x86_phys_bits = eax & 0xff;
|
2008-01-30 12:33:32 +00:00
|
|
|
}
|
2009-03-12 12:37:34 +00:00
|
|
|
#ifdef CONFIG_X86_32
|
|
|
|
else if (cpu_has(c, X86_FEATURE_PAE) || cpu_has(c, X86_FEATURE_PSE36))
|
|
|
|
c->x86_phys_bits = 36;
|
2008-09-05 03:09:09 +00:00
|
|
|
#endif
|
2008-09-06 08:52:28 +00:00
|
|
|
|
|
|
|
if (c->extended_cpuid_level >= 0x80000007)
|
|
|
|
c->x86_power = cpuid_edx(0x80000007);
|
2008-01-30 12:33:32 +00:00
|
|
|
|
2010-05-19 19:01:23 +00:00
|
|
|
init_scattered_cpuid_features(c);
|
2008-01-30 12:33:32 +00:00
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static void identify_cpu_without_cpuid(struct cpuinfo_x86 *c)
|
2008-09-14 09:33:15 +00:00
|
|
|
{
|
|
|
|
#ifdef CONFIG_X86_32
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* First of all, decide if this is a 486 or higher
|
|
|
|
* It's a 486 if we can modify the AC flag
|
|
|
|
*/
|
|
|
|
if (flag_is_changeable_p(X86_EFLAGS_AC))
|
|
|
|
c->x86 = 4;
|
|
|
|
else
|
|
|
|
c->x86 = 3;
|
|
|
|
|
|
|
|
for (i = 0; i < X86_VENDOR_NUM; i++)
|
|
|
|
if (cpu_devs[i] && cpu_devs[i]->c_identify) {
|
|
|
|
c->x86_vendor_id[0] = 0;
|
|
|
|
cpu_devs[i]->c_identify(c);
|
|
|
|
if (c->x86_vendor_id[0]) {
|
|
|
|
get_cpu_vendor(c);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
2008-02-24 10:58:13 +00:00
|
|
|
/*
|
|
|
|
* Do minimum CPU detection early.
|
|
|
|
* Fields really needed: vendor, cpuid_level, family, model, mask,
|
|
|
|
* cache alignment.
|
|
|
|
* The others are not touched to avoid unwanted side effects.
|
|
|
|
*
|
|
|
|
* WARNING: this function is only called on the BP. Don't add code here
|
|
|
|
* that is supposed to run on all CPUs.
|
|
|
|
*/
|
2008-09-04 19:09:44 +00:00
|
|
|
static void __init early_identify_cpu(struct cpuinfo_x86 *c)
|
2006-12-07 01:14:08 +00:00
|
|
|
{
|
2008-09-05 03:09:10 +00:00
|
|
|
#ifdef CONFIG_X86_64
|
|
|
|
c->x86_clflush_size = 64;
|
2009-03-12 12:37:34 +00:00
|
|
|
c->x86_phys_bits = 36;
|
|
|
|
c->x86_virt_bits = 48;
|
2008-09-05 03:09:10 +00:00
|
|
|
#else
|
2008-01-31 21:05:45 +00:00
|
|
|
c->x86_clflush_size = 32;
|
2009-03-12 12:37:34 +00:00
|
|
|
c->x86_phys_bits = 32;
|
|
|
|
c->x86_virt_bits = 32;
|
2008-09-05 03:09:10 +00:00
|
|
|
#endif
|
2008-09-04 19:09:47 +00:00
|
|
|
c->x86_cache_alignment = c->x86_clflush_size;
|
2006-12-07 01:14:08 +00:00
|
|
|
|
2008-09-04 19:09:44 +00:00
|
|
|
memset(&c->x86_capability, 0, sizeof c->x86_capability);
|
2008-09-04 19:09:47 +00:00
|
|
|
c->extended_cpuid_level = 0;
|
2006-12-07 01:14:08 +00:00
|
|
|
|
2008-09-14 09:33:15 +00:00
|
|
|
if (!have_cpuid_p())
|
|
|
|
identify_cpu_without_cpuid(c);
|
|
|
|
|
|
|
|
/* cyrix could have cpuid enabled via c_identify()*/
|
2006-12-07 01:14:08 +00:00
|
|
|
if (!have_cpuid_p())
|
|
|
|
return;
|
|
|
|
|
|
|
|
cpu_detect(c);
|
2008-09-04 19:09:44 +00:00
|
|
|
get_cpu_vendor(c);
|
|
|
|
get_cpu_cap(c);
|
2015-04-26 13:12:44 +00:00
|
|
|
fpu__init_system(c);
|
2008-09-04 19:09:43 +00:00
|
|
|
|
2008-09-04 19:09:45 +00:00
|
|
|
if (this_cpu->c_early_init)
|
|
|
|
this_cpu->c_early_init(c);
|
2008-01-30 12:33:32 +00:00
|
|
|
|
2010-07-21 17:03:58 +00:00
|
|
|
c->cpu_index = 0;
|
2009-01-24 01:20:50 +00:00
|
|
|
filter_cpuid_features(c, false);
|
2011-05-11 23:51:05 +00:00
|
|
|
|
2011-08-05 18:01:16 +00:00
|
|
|
if (this_cpu->c_bsp_init)
|
|
|
|
this_cpu->c_bsp_init(c);
|
2013-06-09 10:07:30 +00:00
|
|
|
|
|
|
|
setup_force_cpu_cap(X86_FEATURE_ALWAYS);
|
2006-12-07 01:14:08 +00:00
|
|
|
}
|
|
|
|
|
2008-09-04 19:09:44 +00:00
|
|
|
void __init early_cpu_init(void)
|
|
|
|
{
|
2009-03-12 12:08:49 +00:00
|
|
|
const struct cpu_dev *const *cdev;
|
2008-09-04 19:09:45 +00:00
|
|
|
int count = 0;
|
|
|
|
|
2011-03-04 15:52:35 +00:00
|
|
|
#ifdef CONFIG_PROCESSOR_SELECT
|
2009-03-14 05:49:49 +00:00
|
|
|
printk(KERN_INFO "KERNEL supported cpus:\n");
|
2009-11-14 09:34:41 +00:00
|
|
|
#endif
|
|
|
|
|
2008-09-04 19:09:45 +00:00
|
|
|
for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) {
|
2009-03-12 12:08:49 +00:00
|
|
|
const struct cpu_dev *cpudev = *cdev;
|
2008-09-04 19:09:44 +00:00
|
|
|
|
2008-09-04 19:09:45 +00:00
|
|
|
if (count >= X86_VENDOR_NUM)
|
|
|
|
break;
|
|
|
|
cpu_devs[count] = cpudev;
|
|
|
|
count++;
|
|
|
|
|
2011-03-04 15:52:35 +00:00
|
|
|
#ifdef CONFIG_PROCESSOR_SELECT
|
2009-11-14 09:34:41 +00:00
|
|
|
{
|
|
|
|
unsigned int j;
|
|
|
|
|
|
|
|
for (j = 0; j < 2; j++) {
|
|
|
|
if (!cpudev->c_ident[j])
|
|
|
|
continue;
|
|
|
|
printk(KERN_INFO " %s %s\n", cpudev->c_vendor,
|
|
|
|
cpudev->c_ident[j]);
|
|
|
|
}
|
2008-09-04 19:09:45 +00:00
|
|
|
}
|
2009-11-13 20:30:00 +00:00
|
|
|
#endif
|
2008-09-04 19:09:45 +00:00
|
|
|
}
|
2008-09-04 19:09:44 +00:00
|
|
|
early_identify_cpu(&boot_cpu_data);
|
2006-12-07 01:14:08 +00:00
|
|
|
}
|
2008-01-30 12:33:32 +00:00
|
|
|
|
2008-08-19 00:39:32 +00:00
|
|
|
/*
|
2010-10-04 07:31:27 +00:00
|
|
|
* The NOPL instruction is supposed to exist on all CPUs of family >= 6;
|
|
|
|
* unfortunately, that's not true in practice because of early VIA
|
|
|
|
* chips and (more importantly) broken virtualizers that are not easy
|
|
|
|
* to detect. In the latter case it doesn't even *fail* reliably, so
|
|
|
|
* probing for it doesn't even work. Disable it completely on 32-bit
|
2008-09-16 16:29:40 +00:00
|
|
|
* unless we can find a reliable way to detect all the broken cases.
|
2010-10-04 07:31:27 +00:00
|
|
|
* Enable it explicitly on 64-bit for non-constant inputs of cpu_has().
|
2008-08-19 00:39:32 +00:00
|
|
|
*/
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static void detect_nopl(struct cpuinfo_x86 *c)
|
2008-08-19 00:39:32 +00:00
|
|
|
{
|
2010-10-04 07:31:27 +00:00
|
|
|
#ifdef CONFIG_X86_32
|
2008-08-19 00:39:32 +00:00
|
|
|
clear_cpu_cap(c, X86_FEATURE_NOPL);
|
2010-10-04 07:31:27 +00:00
|
|
|
#else
|
|
|
|
set_cpu_cap(c, X86_FEATURE_NOPL);
|
|
|
|
#endif
|
2006-12-07 01:14:08 +00:00
|
|
|
}
|
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static void generic_identify(struct cpuinfo_x86 *c)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2008-09-14 09:33:15 +00:00
|
|
|
c->extended_cpuid_level = 0;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-04 19:09:44 +00:00
|
|
|
if (!have_cpuid_p())
|
2008-09-14 09:33:15 +00:00
|
|
|
identify_cpu_without_cpuid(c);
|
2007-07-11 19:18:32 +00:00
|
|
|
|
2008-09-14 09:33:15 +00:00
|
|
|
/* cyrix could have cpuid enabled via c_identify()*/
|
2008-09-14 12:46:58 +00:00
|
|
|
if (!have_cpuid_p())
|
2008-09-14 09:33:15 +00:00
|
|
|
return;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-04 19:09:44 +00:00
|
|
|
cpu_detect(c);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-04 19:09:44 +00:00
|
|
|
get_cpu_vendor(c);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-04 19:09:44 +00:00
|
|
|
get_cpu_cap(c);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-04 19:09:44 +00:00
|
|
|
if (c->cpuid_level >= 0x00000001) {
|
|
|
|
c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF;
|
2008-09-05 03:09:12 +00:00
|
|
|
#ifdef CONFIG_X86_32
|
2015-06-04 16:55:25 +00:00
|
|
|
# ifdef CONFIG_SMP
|
2009-01-28 12:24:54 +00:00
|
|
|
c->apicid = apic->phys_pkg_id(c->initial_apicid, 0);
|
2008-09-05 03:09:12 +00:00
|
|
|
# else
|
2008-09-04 19:09:44 +00:00
|
|
|
c->apicid = c->initial_apicid;
|
2008-09-05 03:09:12 +00:00
|
|
|
# endif
|
|
|
|
#endif
|
|
|
|
c->phys_proc_id = c->initial_apicid;
|
2008-09-04 19:09:44 +00:00
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-06 08:52:27 +00:00
|
|
|
get_model_name(c); /* Default name */
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-04 19:09:44 +00:00
|
|
|
detect_nopl(c);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2015-01-23 18:45:43 +00:00
|
|
|
static void x86_init_cache_qos(struct cpuinfo_x86 *c)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* The heavy lifting of max_rmid and cache_occ_scale are handled
|
|
|
|
* in get_cpu_cap(). Here we just set the max_rmid for the boot_cpu
|
|
|
|
* in case CQM bits really aren't there in this CPU.
|
|
|
|
*/
|
|
|
|
if (c != &boot_cpu_data) {
|
|
|
|
boot_cpu_data.x86_cache_max_rmid =
|
|
|
|
min(boot_cpu_data.x86_cache_max_rmid,
|
|
|
|
c->x86_cache_max_rmid);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* This does the hard work of actually picking apart the CPU stuff...
|
|
|
|
*/
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static void identify_cpu(struct cpuinfo_x86 *c)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
c->loops_per_jiffy = loops_per_jiffy;
|
|
|
|
c->x86_cache_size = -1;
|
|
|
|
c->x86_vendor = X86_VENDOR_UNKNOWN;
|
|
|
|
c->x86_model = c->x86_mask = 0; /* So far unknown... */
|
|
|
|
c->x86_vendor_id[0] = '\0'; /* Unset */
|
|
|
|
c->x86_model_id[0] = '\0'; /* Unset */
|
2005-11-05 16:25:54 +00:00
|
|
|
c->x86_max_cores = 1;
|
2008-09-05 03:09:13 +00:00
|
|
|
c->x86_coreid_bits = 0;
|
2008-09-08 00:58:50 +00:00
|
|
|
#ifdef CONFIG_X86_64
|
2008-09-05 03:09:13 +00:00
|
|
|
c->x86_clflush_size = 64;
|
2009-03-12 12:37:34 +00:00
|
|
|
c->x86_phys_bits = 36;
|
|
|
|
c->x86_virt_bits = 48;
|
2008-09-05 03:09:13 +00:00
|
|
|
#else
|
|
|
|
c->cpuid_level = -1; /* CPUID not detected */
|
2006-12-07 01:14:05 +00:00
|
|
|
c->x86_clflush_size = 32;
|
2009-03-12 12:37:34 +00:00
|
|
|
c->x86_phys_bits = 32;
|
|
|
|
c->x86_virt_bits = 32;
|
2008-09-05 03:09:13 +00:00
|
|
|
#endif
|
|
|
|
c->x86_cache_alignment = c->x86_clflush_size;
|
2005-04-16 22:20:36 +00:00
|
|
|
memset(&c->x86_capability, 0, sizeof c->x86_capability);
|
|
|
|
|
|
|
|
generic_identify(c);
|
|
|
|
|
2008-01-30 12:32:49 +00:00
|
|
|
if (this_cpu->c_identify)
|
2005-04-16 22:20:36 +00:00
|
|
|
this_cpu->c_identify(c);
|
|
|
|
|
2009-05-15 20:05:16 +00:00
|
|
|
/* Clear/Set all flags overriden by options, after probe */
|
|
|
|
for (i = 0; i < NCAPINTS; i++) {
|
|
|
|
c->x86_capability[i] &= ~cpu_caps_cleared[i];
|
|
|
|
c->x86_capability[i] |= cpu_caps_set[i];
|
|
|
|
}
|
|
|
|
|
2008-09-05 03:09:13 +00:00
|
|
|
#ifdef CONFIG_X86_64
|
2009-01-28 12:24:54 +00:00
|
|
|
c->apicid = apic->phys_pkg_id(c->initial_apicid, 0);
|
2008-09-05 03:09:13 +00:00
|
|
|
#endif
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* Vendor-specific initialization. In this section we
|
|
|
|
* canonicalize the feature flags, meaning if there are
|
|
|
|
* features a certain CPU supports which CPUID doesn't
|
|
|
|
* tell us, CPUID claiming incorrect flags, or other bugs,
|
|
|
|
* we handle them here.
|
|
|
|
*
|
|
|
|
* At the end of this section, c->x86_capability better
|
|
|
|
* indicate the features this CPU genuinely supports!
|
|
|
|
*/
|
|
|
|
if (this_cpu->c_init)
|
|
|
|
this_cpu->c_init(c);
|
|
|
|
|
|
|
|
/* Disable the PN if appropriate */
|
|
|
|
squash_the_stupid_serial_number(c);
|
|
|
|
|
2012-09-27 01:02:28 +00:00
|
|
|
/* Set up SMEP/SMAP */
|
|
|
|
setup_smep(c);
|
|
|
|
setup_smap(c);
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/*
|
2009-03-14 07:46:17 +00:00
|
|
|
* The vendor-specific functions might have changed features.
|
|
|
|
* Now we do "generic changes."
|
2005-04-16 22:20:36 +00:00
|
|
|
*/
|
|
|
|
|
2009-01-24 01:20:50 +00:00
|
|
|
/* Filter out anything that depends on CPUID levels we don't have */
|
|
|
|
filter_cpuid_features(c, true);
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/* If the model name is still unset, do table lookup. */
|
2008-02-24 10:58:13 +00:00
|
|
|
if (!c->x86_model_id[0]) {
|
2009-03-12 12:08:49 +00:00
|
|
|
const char *p;
|
2005-04-16 22:20:36 +00:00
|
|
|
p = table_lookup_model(c);
|
2008-02-24 10:58:13 +00:00
|
|
|
if (p)
|
2005-04-16 22:20:36 +00:00
|
|
|
strcpy(c->x86_model_id, p);
|
|
|
|
else
|
|
|
|
/* Last resort... */
|
|
|
|
sprintf(c->x86_model_id, "%02x/%02x",
|
2006-03-23 10:59:36 +00:00
|
|
|
c->x86, c->x86_model);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2008-09-05 03:09:13 +00:00
|
|
|
#ifdef CONFIG_X86_64
|
|
|
|
detect_ht(c);
|
|
|
|
#endif
|
|
|
|
|
2008-10-27 17:41:46 +00:00
|
|
|
init_hypervisor(c);
|
2011-07-31 21:02:19 +00:00
|
|
|
x86_init_rdrand(c);
|
2015-01-23 18:45:43 +00:00
|
|
|
x86_init_cache_qos(c);
|
2009-05-10 06:47:42 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Clear/Set all flags overriden by options, need do it
|
|
|
|
* before following smp all cpus cap AND.
|
|
|
|
*/
|
|
|
|
for (i = 0; i < NCAPINTS; i++) {
|
|
|
|
c->x86_capability[i] &= ~cpu_caps_cleared[i];
|
|
|
|
c->x86_capability[i] |= cpu_caps_set[i];
|
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* On SMP, boot_cpu_data holds the common feature set between
|
|
|
|
* all CPUs; so make sure that we indicate which features are
|
|
|
|
* common between the CPUs. The first time this routine gets
|
|
|
|
* executed, c == &boot_cpu_data.
|
|
|
|
*/
|
2008-02-24 10:58:13 +00:00
|
|
|
if (c != &boot_cpu_data) {
|
2005-04-16 22:20:36 +00:00
|
|
|
/* AND the already accumulated flags with these */
|
2008-09-04 19:09:44 +00:00
|
|
|
for (i = 0; i < NCAPINTS; i++)
|
2005-04-16 22:20:36 +00:00
|
|
|
boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
|
2013-03-20 14:07:23 +00:00
|
|
|
|
|
|
|
/* OR, i.e. replicate the bug flags */
|
|
|
|
for (i = NCAPINTS; i < NCAPINTS + NBUGINTS; i++)
|
|
|
|
c->x86_capability[i] |= boot_cpu_data.x86_capability[i];
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Init Machine Check Exception if available. */
|
2009-10-16 10:31:32 +00:00
|
|
|
mcheck_cpu_init(c);
|
2008-01-30 12:33:16 +00:00
|
|
|
|
|
|
|
select_idle_routine(c);
|
2008-09-05 03:09:13 +00:00
|
|
|
|
2011-01-23 13:37:41 +00:00
|
|
|
#ifdef CONFIG_NUMA
|
2008-09-05 03:09:13 +00:00
|
|
|
numa_add_cpu(smp_processor_id());
|
|
|
|
#endif
|
2007-05-02 17:27:12 +00:00
|
|
|
}
|
2005-11-07 08:58:42 +00:00
|
|
|
|
2015-03-16 09:32:20 +00:00
|
|
|
/*
|
|
|
|
* Set up the CPU state needed to execute SYSENTER/SYSEXIT instructions
|
|
|
|
* on 32-bit kernels:
|
|
|
|
*/
|
2014-05-05 19:19:33 +00:00
|
|
|
#ifdef CONFIG_X86_32
|
|
|
|
void enable_sep_cpu(void)
|
|
|
|
{
|
2015-03-16 09:32:20 +00:00
|
|
|
struct tss_struct *tss;
|
|
|
|
int cpu;
|
2014-05-05 19:19:33 +00:00
|
|
|
|
2015-03-16 09:32:20 +00:00
|
|
|
cpu = get_cpu();
|
|
|
|
tss = &per_cpu(cpu_tss, cpu);
|
|
|
|
|
|
|
|
if (!boot_cpu_has(X86_FEATURE_SEP))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
/*
|
2015-04-02 19:41:45 +00:00
|
|
|
* We cache MSR_IA32_SYSENTER_CS's value in the TSS's ss1 field --
|
|
|
|
* see the big comment in struct x86_hw_tss's definition.
|
2015-03-16 09:32:20 +00:00
|
|
|
*/
|
2014-05-05 19:19:33 +00:00
|
|
|
|
|
|
|
tss->x86_tss.ss1 = __KERNEL_CS;
|
2015-03-16 09:32:20 +00:00
|
|
|
wrmsr(MSR_IA32_SYSENTER_CS, tss->x86_tss.ss1, 0);
|
|
|
|
|
2015-04-02 19:41:45 +00:00
|
|
|
wrmsr(MSR_IA32_SYSENTER_ESP,
|
|
|
|
(unsigned long)tss + offsetofend(struct tss_struct, SYSENTER_stack),
|
|
|
|
0);
|
2015-03-16 09:32:20 +00:00
|
|
|
|
2015-06-08 06:33:56 +00:00
|
|
|
wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)entry_SYSENTER_32, 0);
|
2015-03-16 09:32:20 +00:00
|
|
|
|
|
|
|
out:
|
2014-05-05 19:19:33 +00:00
|
|
|
put_cpu();
|
|
|
|
}
|
2008-09-22 17:35:08 +00:00
|
|
|
#endif
|
|
|
|
|
2007-05-02 17:27:12 +00:00
|
|
|
void __init identify_boot_cpu(void)
|
|
|
|
{
|
|
|
|
identify_cpu(&boot_cpu_data);
|
2011-04-01 20:59:53 +00:00
|
|
|
init_amd_e400_c1e_mask();
|
2008-09-05 03:09:13 +00:00
|
|
|
#ifdef CONFIG_X86_32
|
2007-05-02 17:27:12 +00:00
|
|
|
sysenter_setup();
|
2005-06-25 21:54:53 +00:00
|
|
|
enable_sep_cpu();
|
2008-09-05 03:09:13 +00:00
|
|
|
#endif
|
2012-08-06 17:00:37 +00:00
|
|
|
cpu_detect_tlb(&boot_cpu_data);
|
2007-05-02 17:27:12 +00:00
|
|
|
}
|
2005-07-08 00:56:38 +00:00
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
void identify_secondary_cpu(struct cpuinfo_x86 *c)
|
2007-05-02 17:27:12 +00:00
|
|
|
{
|
|
|
|
BUG_ON(c == &boot_cpu_data);
|
|
|
|
identify_cpu(c);
|
2008-09-05 03:09:13 +00:00
|
|
|
#ifdef CONFIG_X86_32
|
2007-05-02 17:27:12 +00:00
|
|
|
enable_sep_cpu();
|
2008-09-05 03:09:13 +00:00
|
|
|
#endif
|
2007-05-02 17:27:12 +00:00
|
|
|
mtrr_ap_init();
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2008-09-04 19:09:46 +00:00
|
|
|
struct msr_range {
|
2009-03-14 07:46:17 +00:00
|
|
|
unsigned min;
|
|
|
|
unsigned max;
|
2008-09-04 19:09:46 +00:00
|
|
|
};
|
2005-04-16 22:20:36 +00:00
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static const struct msr_range msr_range_array[] = {
|
2008-09-04 19:09:46 +00:00
|
|
|
{ 0x00000000, 0x00000418},
|
|
|
|
{ 0xc0000000, 0xc000040b},
|
|
|
|
{ 0xc0010000, 0xc0010142},
|
|
|
|
{ 0xc0011000, 0xc001103b},
|
|
|
|
};
|
2005-04-16 22:20:36 +00:00
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static void __print_cpu_msr(void)
|
2008-09-04 19:09:46 +00:00
|
|
|
{
|
2009-03-14 07:46:17 +00:00
|
|
|
unsigned index_min, index_max;
|
2008-09-04 19:09:46 +00:00
|
|
|
unsigned index;
|
|
|
|
u64 val;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) {
|
|
|
|
index_min = msr_range_array[i].min;
|
|
|
|
index_max = msr_range_array[i].max;
|
2009-03-14 07:46:17 +00:00
|
|
|
|
2008-09-04 19:09:46 +00:00
|
|
|
for (index = index_min; index < index_max; index++) {
|
2012-06-01 14:52:36 +00:00
|
|
|
if (rdmsrl_safe(index, &val))
|
2008-09-04 19:09:46 +00:00
|
|
|
continue;
|
|
|
|
printk(KERN_INFO " MSR%08x: %016llx\n", index, val);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2008-09-04 19:09:46 +00:00
|
|
|
}
|
|
|
|
}
|
2005-11-05 16:25:54 +00:00
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
static int show_msr;
|
2009-03-14 07:46:17 +00:00
|
|
|
|
2008-09-04 19:09:46 +00:00
|
|
|
static __init int setup_show_msr(char *arg)
|
|
|
|
{
|
|
|
|
int num;
|
2005-04-16 22:25:15 +00:00
|
|
|
|
2008-09-04 19:09:46 +00:00
|
|
|
get_option(&arg, &num);
|
2005-04-16 22:25:15 +00:00
|
|
|
|
2008-09-04 19:09:46 +00:00
|
|
|
if (num > 0)
|
|
|
|
show_msr = num;
|
|
|
|
return 1;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2008-09-04 19:09:46 +00:00
|
|
|
__setup("show_msr=", setup_show_msr);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-01-30 12:33:21 +00:00
|
|
|
static __init int setup_noclflush(char *arg)
|
|
|
|
{
|
2014-02-27 16:31:30 +00:00
|
|
|
setup_clear_cpu_cap(X86_FEATURE_CLFLUSH);
|
2014-02-27 16:36:31 +00:00
|
|
|
setup_clear_cpu_cap(X86_FEATURE_CLFLUSHOPT);
|
2008-01-30 12:33:21 +00:00
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
__setup("noclflush", setup_noclflush);
|
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
void print_cpu_info(struct cpuinfo_x86 *c)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2009-03-12 12:08:49 +00:00
|
|
|
const char *vendor = NULL;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2009-03-14 07:46:17 +00:00
|
|
|
if (c->x86_vendor < X86_VENDOR_NUM) {
|
2005-04-16 22:20:36 +00:00
|
|
|
vendor = this_cpu->c_vendor;
|
2009-03-14 07:46:17 +00:00
|
|
|
} else {
|
|
|
|
if (c->cpuid_level >= 0)
|
|
|
|
vendor = c->x86_vendor_id;
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-20 01:41:16 +00:00
|
|
|
if (vendor && !strstr(c->x86_model_id, vendor))
|
2008-09-04 19:09:44 +00:00
|
|
|
printk(KERN_CONT "%s ", vendor);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-09-04 19:09:44 +00:00
|
|
|
if (c->x86_model_id[0])
|
2015-05-26 08:28:17 +00:00
|
|
|
printk(KERN_CONT "%s", c->x86_model_id);
|
2005-04-16 22:20:36 +00:00
|
|
|
else
|
2008-09-04 19:09:44 +00:00
|
|
|
printk(KERN_CONT "%d86", c->x86);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2012-09-14 16:37:46 +00:00
|
|
|
printk(KERN_CONT " (fam: %02x, model: %02x", c->x86, c->x86_model);
|
|
|
|
|
2008-02-24 10:58:13 +00:00
|
|
|
if (c->x86_mask || c->cpuid_level >= 0)
|
2012-09-14 16:37:46 +00:00
|
|
|
printk(KERN_CONT ", stepping: %02x)\n", c->x86_mask);
|
2005-04-16 22:20:36 +00:00
|
|
|
else
|
2012-09-14 16:37:46 +00:00
|
|
|
printk(KERN_CONT ")\n");
|
2008-09-04 19:09:46 +00:00
|
|
|
|
2012-03-23 04:31:43 +00:00
|
|
|
print_cpu_msr(c);
|
2012-02-12 17:53:57 +00:00
|
|
|
}
|
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
void print_cpu_msr(struct cpuinfo_x86 *c)
|
2012-02-12 17:53:57 +00:00
|
|
|
{
|
2008-09-04 19:09:46 +00:00
|
|
|
if (c->cpu_index < show_msr)
|
2012-02-12 17:53:57 +00:00
|
|
|
__print_cpu_msr();
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2008-01-30 12:33:21 +00:00
|
|
|
static __init int setup_disablecpuid(char *arg)
|
|
|
|
{
|
|
|
|
int bit;
|
2009-03-14 07:46:17 +00:00
|
|
|
|
2008-01-30 12:33:21 +00:00
|
|
|
if (get_option(&arg, &bit) && bit < NCAPINTS*32)
|
|
|
|
setup_clear_cpu_cap(bit);
|
|
|
|
else
|
|
|
|
return 0;
|
2009-03-14 07:46:17 +00:00
|
|
|
|
2008-01-30 12:33:21 +00:00
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
__setup("clearcpuid=", setup_disablecpuid);
|
|
|
|
|
2008-09-05 03:09:03 +00:00
|
|
|
#ifdef CONFIG_X86_64
|
2009-07-08 18:03:53 +00:00
|
|
|
struct desc_ptr idt_descr = { NR_VECTORS * 16 - 1, (unsigned long) idt_table };
|
2013-06-20 15:45:44 +00:00
|
|
|
struct desc_ptr debug_idt_descr = { NR_VECTORS * 16 - 1,
|
|
|
|
(unsigned long) debug_idt_table };
|
2008-09-05 03:09:03 +00:00
|
|
|
|
2009-01-19 03:21:28 +00:00
|
|
|
DEFINE_PER_CPU_FIRST(union irq_stack_union,
|
2013-08-05 22:02:43 +00:00
|
|
|
irq_stack_union) __aligned(PAGE_SIZE) __visible;
|
2009-03-14 07:46:17 +00:00
|
|
|
|
2009-08-03 05:12:19 +00:00
|
|
|
/*
|
2015-03-07 01:50:19 +00:00
|
|
|
* The following percpu variables are hot. Align current_task to
|
|
|
|
* cacheline size such that they fall in the same cacheline.
|
2009-08-03 05:12:19 +00:00
|
|
|
*/
|
|
|
|
DEFINE_PER_CPU(struct task_struct *, current_task) ____cacheline_aligned =
|
|
|
|
&init_task;
|
|
|
|
EXPORT_PER_CPU_SYMBOL(current_task);
|
2008-09-05 03:09:03 +00:00
|
|
|
|
2009-08-03 05:12:19 +00:00
|
|
|
DEFINE_PER_CPU(char *, irq_stack_ptr) =
|
|
|
|
init_per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64;
|
|
|
|
|
2013-08-05 22:02:43 +00:00
|
|
|
DEFINE_PER_CPU(unsigned int, irq_count) __visible = -1;
|
2008-09-05 03:09:03 +00:00
|
|
|
|
2013-08-14 12:51:00 +00:00
|
|
|
DEFINE_PER_CPU(int, __preempt_count) = INIT_PREEMPT_COUNT;
|
|
|
|
EXPORT_PER_CPU_SYMBOL(__preempt_count);
|
|
|
|
|
2009-03-14 07:46:17 +00:00
|
|
|
/*
|
|
|
|
* Special IST stacks which the CPU switches to when it calls
|
|
|
|
* an IST-marked descriptor entry. Up to 7 stacks (hardware
|
|
|
|
* limit), all of them are 4K, except the debug stack which
|
|
|
|
* is 8K.
|
|
|
|
*/
|
|
|
|
static const unsigned int exception_stack_sizes[N_EXCEPTION_STACKS] = {
|
|
|
|
[0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STKSZ,
|
|
|
|
[DEBUG_STACK - 1] = DEBUG_STKSZ
|
|
|
|
};
|
|
|
|
|
2009-01-18 15:38:58 +00:00
|
|
|
static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
|
2009-08-03 05:10:11 +00:00
|
|
|
[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]);
|
2008-09-05 03:09:03 +00:00
|
|
|
|
|
|
|
/* May not be marked __init: used by software suspend */
|
|
|
|
void syscall_init(void)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2008-09-05 03:09:03 +00:00
|
|
|
/*
|
|
|
|
* LSTAR and STAR live in a bit strange symbiosis.
|
|
|
|
* They both write to the same internal register. STAR allows to
|
|
|
|
* set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
|
|
|
|
*/
|
|
|
|
wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32);
|
2015-06-08 06:42:03 +00:00
|
|
|
wrmsrl(MSR_LSTAR, entry_SYSCALL_64);
|
2015-03-24 13:41:37 +00:00
|
|
|
|
|
|
|
#ifdef CONFIG_IA32_EMULATION
|
2015-06-08 06:28:07 +00:00
|
|
|
wrmsrl(MSR_CSTAR, entry_SYSCALL_compat);
|
2015-03-22 19:48:14 +00:00
|
|
|
/*
|
2015-03-27 10:59:16 +00:00
|
|
|
* This only works on Intel CPUs.
|
|
|
|
* On AMD CPUs these MSRs are 32-bit, CPU truncates MSR_IA32_SYSENTER_EIP.
|
|
|
|
* This does not cause SYSENTER to jump to the wrong location, because
|
|
|
|
* AMD doesn't allow SYSENTER in long mode (either 32- or 64-bit).
|
2015-03-22 19:48:14 +00:00
|
|
|
*/
|
|
|
|
wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
|
|
|
|
wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
|
2015-06-08 06:33:56 +00:00
|
|
|
wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
|
2015-03-24 13:41:37 +00:00
|
|
|
#else
|
|
|
|
wrmsrl(MSR_CSTAR, ignore_sysret);
|
2015-04-03 12:25:28 +00:00
|
|
|
wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)GDT_ENTRY_INVALID_SEG);
|
2015-03-24 13:41:37 +00:00
|
|
|
wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
|
|
|
|
wrmsrl_safe(MSR_IA32_SYSENTER_EIP, 0ULL);
|
2008-09-05 03:09:03 +00:00
|
|
|
#endif
|
x86: use ELF section to list CPU vendor specific code
Replace the hardcoded list of initialization functions for each CPU
vendor by a list in an ELF section, which is read at initialization in
arch/x86/kernel/cpu/cpu.c to fill the cpu_devs[] array. The ELF
section, named .x86cpuvendor.init, is reclaimed after boot, and
contains entries of type "struct cpu_vendor_dev" which associates a
vendor number with a pointer to a "struct cpu_dev" structure.
This first modification allows to remove all the VENDOR_init_cpu()
functions.
This patch also removes the hardcoded calls to early_init_amd() and
early_init_intel(). Instead, we add a "c_early_init" member to the
cpu_dev structure, which is then called if not NULL by the generic CPU
initialization code. Unfortunately, in early_cpu_detect(), this_cpu is
not yet set, so we have to use the cpu_devs[] array directly.
This patch is part of the Linux Tiny project, and is needed for
further patch that will allow to disable compilation of unused CPU
support code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-15 11:00:23 +00:00
|
|
|
|
2008-09-05 03:09:03 +00:00
|
|
|
/* Flags to clear on syscall */
|
|
|
|
wrmsrl(MSR_SYSCALL_MASK,
|
2012-09-21 19:43:12 +00:00
|
|
|
X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|
|
x86_64, entry: Filter RFLAGS.NT on entry from userspace
The NT flag doesn't do anything in long mode other than causing IRET
to #GP. Oddly, CPL3 code can still set NT using popf.
Entry via hardware or software interrupt clears NT automatically, so
the only relevant entries are fast syscalls.
If user code causes kernel code to run with NT set, then there's at
least some (small) chance that it could cause trouble. For example,
user code could cause a call to EFI code with NT set, and who knows
what would happen? Apparently some games on Wine sometimes do
this (!), and, if an IRET return happens, they will segfault. That
segfault cannot be handled, because signal delivery fails, too.
This patch programs the CPU to clear NT on entry via SYSCALL (both
32-bit and 64-bit, by my reading of the AMD APM), and it clears NT
in software on entry via SYSENTER.
To save a few cycles, this borrows a trick from Jan Beulich in Xen:
it checks whether NT is set before trying to clear it. As a result,
it seems to have very little effect on SYSENTER performance on my
machine.
There's another minor bug fix in here: it looks like the CFI
annotations were wrong if CONFIG_AUDITSYSCALL=n.
Testers beware: on Xen, SYSENTER with NT set turns into a GPF.
I haven't touched anything on 32-bit kernels.
The syscall mask change comes from a variant of this patch by Anish
Bhatt.
Note to stable maintainers: there is no known security issue here.
A misguided program can set NT and cause the kernel to try and fail
to deliver SIGSEGV, crashing the program. This patch fixes Far Cry
on Wine: https://bugs.winehq.org/show_bug.cgi?id=33275
Cc: <stable@vger.kernel.org>
Reported-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/395749a5d39a29bd3e4b35899cf3a3c1340e5595.1412189265.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-10-01 18:49:04 +00:00
|
|
|
X86_EFLAGS_IOPL|X86_EFLAGS_AC|X86_EFLAGS_NT);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2006-12-07 01:14:02 +00:00
|
|
|
|
2008-09-05 03:09:03 +00:00
|
|
|
/*
|
|
|
|
* Copies of the original ist values from the tss are only accessed during
|
|
|
|
* debugging, no special alignment required.
|
|
|
|
*/
|
|
|
|
DEFINE_PER_CPU(struct orig_ist, orig_ist);
|
|
|
|
|
2011-12-09 08:02:19 +00:00
|
|
|
static DEFINE_PER_CPU(unsigned long, debug_stack_addr);
|
2011-12-16 16:43:02 +00:00
|
|
|
DEFINE_PER_CPU(int, debug_stack_usage);
|
2011-12-09 08:02:19 +00:00
|
|
|
|
|
|
|
int is_debug_stack(unsigned long addr)
|
|
|
|
{
|
x86: Replace __get_cpu_var uses
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x). This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less registers
are used when code is generated.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(&x, this_cpu_ptr(&y), sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
__this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
__this_cpu_inc(y)
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:40 +00:00
|
|
|
return __this_cpu_read(debug_stack_usage) ||
|
|
|
|
(addr <= __this_cpu_read(debug_stack_addr) &&
|
|
|
|
addr > (__this_cpu_read(debug_stack_addr) - DEBUG_STKSZ));
|
2011-12-09 08:02:19 +00:00
|
|
|
}
|
2014-04-17 08:17:12 +00:00
|
|
|
NOKPROBE_SYMBOL(is_debug_stack);
|
2011-12-09 08:02:19 +00:00
|
|
|
|
2013-06-20 15:45:44 +00:00
|
|
|
DEFINE_PER_CPU(u32, debug_idt_ctr);
|
2012-05-30 15:47:00 +00:00
|
|
|
|
2011-12-09 08:02:19 +00:00
|
|
|
void debug_stack_set_zero(void)
|
|
|
|
{
|
2013-06-20 15:45:44 +00:00
|
|
|
this_cpu_inc(debug_idt_ctr);
|
|
|
|
load_current_idt();
|
2011-12-09 08:02:19 +00:00
|
|
|
}
|
2014-04-17 08:17:12 +00:00
|
|
|
NOKPROBE_SYMBOL(debug_stack_set_zero);
|
2011-12-09 08:02:19 +00:00
|
|
|
|
|
|
|
void debug_stack_reset(void)
|
|
|
|
{
|
2013-06-20 15:45:44 +00:00
|
|
|
if (WARN_ON(!this_cpu_read(debug_idt_ctr)))
|
2012-05-30 15:47:00 +00:00
|
|
|
return;
|
2013-06-20 15:45:44 +00:00
|
|
|
if (this_cpu_dec_return(debug_idt_ctr) == 0)
|
|
|
|
load_current_idt();
|
2011-12-09 08:02:19 +00:00
|
|
|
}
|
2014-04-17 08:17:12 +00:00
|
|
|
NOKPROBE_SYMBOL(debug_stack_reset);
|
2011-12-09 08:02:19 +00:00
|
|
|
|
2009-03-14 07:46:17 +00:00
|
|
|
#else /* CONFIG_X86_64 */
|
2008-09-05 03:09:03 +00:00
|
|
|
|
2009-08-03 05:12:19 +00:00
|
|
|
DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
|
|
|
|
EXPORT_PER_CPU_SYMBOL(current_task);
|
2013-08-14 12:51:00 +00:00
|
|
|
DEFINE_PER_CPU(int, __preempt_count) = INIT_PREEMPT_COUNT;
|
|
|
|
EXPORT_PER_CPU_SYMBOL(__preempt_count);
|
2009-08-03 05:12:19 +00:00
|
|
|
|
2015-03-07 01:50:19 +00:00
|
|
|
/*
|
|
|
|
* On x86_32, vm86 modifies tss.sp0, so sp0 isn't a reliable way to find
|
|
|
|
* the top of the kernel stack. Use an extra percpu variable to track the
|
|
|
|
* top of the kernel stack directly.
|
|
|
|
*/
|
|
|
|
DEFINE_PER_CPU(unsigned long, cpu_current_top_of_stack) =
|
|
|
|
(unsigned long)&init_thread_union + THREAD_SIZE;
|
|
|
|
EXPORT_PER_CPU_SYMBOL(cpu_current_top_of_stack);
|
|
|
|
|
2009-02-09 13:17:40 +00:00
|
|
|
#ifdef CONFIG_CC_STACKPROTECTOR
|
2009-09-03 21:31:44 +00:00
|
|
|
DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
|
2009-02-09 13:17:40 +00:00
|
|
|
#endif
|
2008-09-05 03:09:03 +00:00
|
|
|
|
2009-03-14 07:46:17 +00:00
|
|
|
#endif /* CONFIG_X86_64 */
|
2007-05-02 17:27:16 +00:00
|
|
|
|
2009-03-14 05:49:49 +00:00
|
|
|
/*
|
|
|
|
* Clear all 6 debug registers:
|
|
|
|
*/
|
|
|
|
static void clear_all_debug_regs(void)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
|
|
/* Ignore db4, db5 */
|
|
|
|
if ((i == 4) || (i == 5))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
set_debugreg(0, i);
|
|
|
|
}
|
|
|
|
}
|
2007-05-02 17:27:16 +00:00
|
|
|
|
2010-05-21 02:04:30 +00:00
|
|
|
#ifdef CONFIG_KGDB
|
|
|
|
/*
|
|
|
|
* Restore debug regs if using kgdbwait and you have a kernel debugger
|
|
|
|
* connection established.
|
|
|
|
*/
|
|
|
|
static void dbg_restore_debug_regs(void)
|
|
|
|
{
|
|
|
|
if (unlikely(kgdb_connected && arch_kgdb_ops.correct_hw_break))
|
|
|
|
arch_kgdb_ops.correct_hw_break();
|
|
|
|
}
|
|
|
|
#else /* ! CONFIG_KGDB */
|
|
|
|
#define dbg_restore_debug_regs()
|
|
|
|
#endif /* ! CONFIG_KGDB */
|
|
|
|
|
2014-06-20 12:23:11 +00:00
|
|
|
static void wait_for_master_cpu(int cpu)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
/*
|
|
|
|
* wait for ACK from master CPU before continuing
|
|
|
|
* with AP initialization
|
|
|
|
*/
|
|
|
|
WARN_ON(cpumask_test_and_set_cpu(cpu, cpu_initialized_mask));
|
|
|
|
while (!cpumask_test_cpu(cpu, cpu_callout_mask))
|
|
|
|
cpu_relax();
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
2007-05-02 17:27:10 +00:00
|
|
|
/*
|
|
|
|
* cpu_init() initializes state that is per-CPU. Some data is already
|
|
|
|
* initialized (naturally) in the bootstrap process, such as the GDT
|
|
|
|
* and IDT. We reload them nevertheless, this function acts as a
|
|
|
|
* 'CPU state barrier', nothing should get across.
|
2008-09-05 03:09:04 +00:00
|
|
|
* A lot of state is already set up in PDA init for 64 bit
|
2007-05-02 17:27:10 +00:00
|
|
|
*/
|
2008-09-05 03:09:04 +00:00
|
|
|
#ifdef CONFIG_X86_64
|
2009-03-14 07:46:17 +00:00
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
void cpu_init(void)
|
2008-09-05 03:09:04 +00:00
|
|
|
{
|
2009-10-29 13:34:14 +00:00
|
|
|
struct orig_ist *oist;
|
2008-09-05 03:09:04 +00:00
|
|
|
struct task_struct *me;
|
2009-03-14 07:46:17 +00:00
|
|
|
struct tss_struct *t;
|
|
|
|
unsigned long v;
|
2014-06-20 12:23:11 +00:00
|
|
|
int cpu = stack_smp_processor_id();
|
2008-09-05 03:09:04 +00:00
|
|
|
int i;
|
|
|
|
|
2014-06-20 12:23:11 +00:00
|
|
|
wait_for_master_cpu(cpu);
|
|
|
|
|
2014-10-24 22:58:08 +00:00
|
|
|
/*
|
|
|
|
* Initialize the CR4 shadow before doing anything that could
|
|
|
|
* try to read it.
|
|
|
|
*/
|
|
|
|
cr4_init_shadow();
|
|
|
|
|
2012-12-21 07:44:24 +00:00
|
|
|
/*
|
|
|
|
* Load microcode on this cpu if a valid microcode is available.
|
|
|
|
* This is early microcode loading procedure.
|
|
|
|
*/
|
|
|
|
load_ucode_ap();
|
|
|
|
|
2015-03-06 03:19:05 +00:00
|
|
|
t = &per_cpu(cpu_tss, cpu);
|
2009-10-29 13:34:14 +00:00
|
|
|
oist = &per_cpu(orig_ist, cpu);
|
2009-03-14 07:46:17 +00:00
|
|
|
|
2009-01-18 15:38:59 +00:00
|
|
|
#ifdef CONFIG_NUMA
|
2012-11-13 19:32:47 +00:00
|
|
|
if (this_cpu_read(numa_node) == 0 &&
|
2010-05-26 21:44:58 +00:00
|
|
|
early_cpu_to_node(cpu) != NUMA_NO_NODE)
|
|
|
|
set_numa_node(early_cpu_to_node(cpu));
|
2009-01-18 15:38:59 +00:00
|
|
|
#endif
|
2008-09-05 03:09:04 +00:00
|
|
|
|
|
|
|
me = current;
|
|
|
|
|
2009-12-11 01:19:36 +00:00
|
|
|
pr_debug("Initializing CPU#%d\n", cpu);
|
2008-09-05 03:09:04 +00:00
|
|
|
|
2014-10-24 22:58:07 +00:00
|
|
|
cr4_clear_bits(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
|
2008-09-05 03:09:04 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Initialize the per-CPU GDT with the boot GDT,
|
|
|
|
* and set up the GDT descriptor:
|
|
|
|
*/
|
|
|
|
|
2009-01-30 08:47:53 +00:00
|
|
|
switch_to_new_gdt(cpu);
|
2009-01-27 03:56:48 +00:00
|
|
|
loadsegment(fs, 0);
|
|
|
|
|
x86, trace: Add irq vector tracepoints
[Purpose of this patch]
As Vaibhav explained in the thread below, tracepoints for irq vectors
are useful.
http://www.spinics.net/lists/mm-commits/msg85707.html
<snip>
The current interrupt traces from irq_handler_entry and irq_handler_exit
provide when an interrupt is handled. They provide good data about when
the system has switched to kernel space and how it affects the currently
running processes.
There are some IRQ vectors which trigger the system into kernel space,
which are not handled in generic IRQ handlers. Tracing such events gives
us the information about IRQ interaction with other system events.
The trace also tells where the system is spending its time. We want to
know which cores are handling interrupts and how they are affecting other
processes in the system. Also, the trace provides information about when
the cores are idle and which interrupts are changing that state.
<snip>
On the other hand, my usecase is tracing just local timer event and
getting a value of instruction pointer.
I suggested to add an argument local timer event to get instruction pointer before.
But there is another way to get it with external module like systemtap.
So, I don't need to add any argument to irq vector tracepoints now.
[Patch Description]
Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events.
But there is an above use case to trace specific irq_vector rather than tracing all events.
In this case, we are concerned about overhead due to unwanted events.
So, add following tracepoints instead of introducing irq_vector_entry/exit.
so that we can enable them independently.
- local_timer_vector
- reschedule_vector
- call_function_vector
- call_function_single_vector
- irq_work_entry_vector
- error_apic_vector
- thermal_apic_vector
- threshold_apic_vector
- spurious_apic_vector
- x86_platform_ipi_vector
Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty
makes a zero when tracepoints are disabled. Detailed explanations are as follows.
- Create trace irq handlers with entering_irq()/exiting_irq().
- Create a new IDT, trace_idt_table, at boot time by adding a logic to
_set_gate(). It is just a copy of original idt table.
- Register the new handlers for tracpoints to the new IDT by introducing
macros to alloc_intr_gate() called at registering time of irq_vector handlers.
- Add checking, whether irq vector tracing is on/off, into load_current_idt().
This has to be done below debug checking for these reasons.
- Switching to debug IDT may be kicked while tracing is enabled.
- On the other hands, switching to trace IDT is kicked only when debugging
is disabled.
In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being
used for other purposes.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 15:46:53 +00:00
|
|
|
load_current_idt();
|
2008-09-05 03:09:04 +00:00
|
|
|
|
|
|
|
memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
|
|
|
|
syscall_init();
|
|
|
|
|
|
|
|
wrmsrl(MSR_FS_BASE, 0);
|
|
|
|
wrmsrl(MSR_KERNEL_GS_BASE, 0);
|
|
|
|
barrier();
|
|
|
|
|
2009-11-13 23:28:16 +00:00
|
|
|
x86_configure_nx();
|
2015-01-15 21:22:26 +00:00
|
|
|
x2apic_setup();
|
2008-09-05 03:09:04 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* set up and load the per-CPU TSS
|
|
|
|
*/
|
2009-10-29 13:34:14 +00:00
|
|
|
if (!oist->ist[0]) {
|
2009-01-18 15:38:58 +00:00
|
|
|
char *estacks = per_cpu(exception_stacks, cpu);
|
2009-03-14 07:46:17 +00:00
|
|
|
|
2008-09-05 03:09:04 +00:00
|
|
|
for (v = 0; v < N_EXCEPTION_STACKS; v++) {
|
2009-03-14 07:46:17 +00:00
|
|
|
estacks += exception_stack_sizes[v];
|
2009-10-29 13:34:14 +00:00
|
|
|
oist->ist[v] = t->x86_tss.ist[v] =
|
2008-09-05 03:09:04 +00:00
|
|
|
(unsigned long)estacks;
|
2011-12-09 08:02:19 +00:00
|
|
|
if (v == DEBUG_STACK-1)
|
|
|
|
per_cpu(debug_stack_addr, cpu) = (unsigned long)estacks;
|
2008-09-05 03:09:04 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
|
2009-03-14 07:46:17 +00:00
|
|
|
|
2008-09-05 03:09:04 +00:00
|
|
|
/*
|
|
|
|
* <= is required because the CPU will access up to
|
|
|
|
* 8 bits beyond the end of the IO permission bitmap.
|
|
|
|
*/
|
|
|
|
for (i = 0; i <= IO_BITMAP_LONGS; i++)
|
|
|
|
t->io_bitmap[i] = ~0UL;
|
|
|
|
|
|
|
|
atomic_inc(&init_mm.mm_count);
|
|
|
|
me->active_mm = &init_mm;
|
2009-03-10 05:10:32 +00:00
|
|
|
BUG_ON(me->mm);
|
2008-09-05 03:09:04 +00:00
|
|
|
enter_lazy_tlb(&init_mm, me);
|
|
|
|
|
|
|
|
load_sp0(t, ¤t->thread);
|
|
|
|
set_tss_desc(cpu, t);
|
|
|
|
load_TR_desc();
|
|
|
|
load_LDT(&init_mm.context);
|
|
|
|
|
2010-05-21 02:04:30 +00:00
|
|
|
clear_all_debug_regs();
|
|
|
|
dbg_restore_debug_regs();
|
2008-09-05 03:09:04 +00:00
|
|
|
|
2015-04-26 12:27:17 +00:00
|
|
|
fpu__init_cpu();
|
2008-09-05 03:09:04 +00:00
|
|
|
|
|
|
|
if (is_uv_system())
|
|
|
|
uv_cpu_init();
|
|
|
|
}
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-18 22:23:59 +00:00
|
|
|
void cpu_init(void)
|
2007-01-22 15:18:31 +00:00
|
|
|
{
|
2007-05-02 17:27:10 +00:00
|
|
|
int cpu = smp_processor_id();
|
|
|
|
struct task_struct *curr = current;
|
2015-03-06 03:19:05 +00:00
|
|
|
struct tss_struct *t = &per_cpu(cpu_tss, cpu);
|
2007-01-22 15:18:31 +00:00
|
|
|
struct thread_struct *thread = &curr->thread;
|
2006-12-07 01:14:02 +00:00
|
|
|
|
2014-06-20 12:23:11 +00:00
|
|
|
wait_for_master_cpu(cpu);
|
2012-12-21 07:44:24 +00:00
|
|
|
|
2015-02-27 19:50:19 +00:00
|
|
|
/*
|
|
|
|
* Initialize the CR4 shadow before doing anything that could
|
|
|
|
* try to read it.
|
|
|
|
*/
|
|
|
|
cr4_init_shadow();
|
|
|
|
|
2014-06-20 12:23:11 +00:00
|
|
|
show_ucode_info_early();
|
2006-12-07 01:14:02 +00:00
|
|
|
|
|
|
|
printk(KERN_INFO "Initializing CPU#%d\n", cpu);
|
|
|
|
|
2014-09-11 21:15:24 +00:00
|
|
|
if (cpu_feature_enabled(X86_FEATURE_VME) || cpu_has_tsc || cpu_has_de)
|
2014-10-24 22:58:07 +00:00
|
|
|
cr4_clear_bits(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
|
2006-12-07 01:14:02 +00:00
|
|
|
|
x86, trace: Add irq vector tracepoints
[Purpose of this patch]
As Vaibhav explained in the thread below, tracepoints for irq vectors
are useful.
http://www.spinics.net/lists/mm-commits/msg85707.html
<snip>
The current interrupt traces from irq_handler_entry and irq_handler_exit
provide when an interrupt is handled. They provide good data about when
the system has switched to kernel space and how it affects the currently
running processes.
There are some IRQ vectors which trigger the system into kernel space,
which are not handled in generic IRQ handlers. Tracing such events gives
us the information about IRQ interaction with other system events.
The trace also tells where the system is spending its time. We want to
know which cores are handling interrupts and how they are affecting other
processes in the system. Also, the trace provides information about when
the cores are idle and which interrupts are changing that state.
<snip>
On the other hand, my usecase is tracing just local timer event and
getting a value of instruction pointer.
I suggested to add an argument local timer event to get instruction pointer before.
But there is another way to get it with external module like systemtap.
So, I don't need to add any argument to irq vector tracepoints now.
[Patch Description]
Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events.
But there is an above use case to trace specific irq_vector rather than tracing all events.
In this case, we are concerned about overhead due to unwanted events.
So, add following tracepoints instead of introducing irq_vector_entry/exit.
so that we can enable them independently.
- local_timer_vector
- reschedule_vector
- call_function_vector
- call_function_single_vector
- irq_work_entry_vector
- error_apic_vector
- thermal_apic_vector
- threshold_apic_vector
- spurious_apic_vector
- x86_platform_ipi_vector
Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty
makes a zero when tracepoints are disabled. Detailed explanations are as follows.
- Create trace irq handlers with entering_irq()/exiting_irq().
- Create a new IDT, trace_idt_table, at boot time by adding a logic to
_set_gate(). It is just a copy of original idt table.
- Register the new handlers for tracpoints to the new IDT by introducing
macros to alloc_intr_gate() called at registering time of irq_vector handlers.
- Add checking, whether irq vector tracing is on/off, into load_current_idt().
This has to be done below debug checking for these reasons.
- Switching to debug IDT may be kicked while tracing is enabled.
- On the other hands, switching to trace IDT is kicked only when debugging
is disabled.
In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being
used for other purposes.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 15:46:53 +00:00
|
|
|
load_current_idt();
|
2009-01-30 08:47:53 +00:00
|
|
|
switch_to_new_gdt(cpu);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Set up and load the per-CPU TSS and LDT
|
|
|
|
*/
|
|
|
|
atomic_inc(&init_mm.mm_count);
|
2006-12-07 01:14:02 +00:00
|
|
|
curr->active_mm = &init_mm;
|
2009-03-10 05:10:32 +00:00
|
|
|
BUG_ON(curr->mm);
|
2006-12-07 01:14:02 +00:00
|
|
|
enter_lazy_tlb(&init_mm, curr);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2008-01-30 12:31:02 +00:00
|
|
|
load_sp0(t, thread);
|
2008-02-24 10:58:13 +00:00
|
|
|
set_tss_desc(cpu, t);
|
2005-04-16 22:20:36 +00:00
|
|
|
load_TR_desc();
|
|
|
|
load_LDT(&init_mm.context);
|
|
|
|
|
2009-05-01 18:59:25 +00:00
|
|
|
t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
|
|
|
|
|
2006-01-08 09:05:24 +00:00
|
|
|
#ifdef CONFIG_DOUBLEFAULT
|
2005-04-16 22:20:36 +00:00
|
|
|
/* Set up doublefault TSS pointer in the GDT */
|
|
|
|
__set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
|
2006-01-08 09:05:24 +00:00
|
|
|
#endif
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2009-03-14 05:49:49 +00:00
|
|
|
clear_all_debug_regs();
|
2010-05-21 02:04:30 +00:00
|
|
|
dbg_restore_debug_regs();
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2015-04-26 12:27:17 +00:00
|
|
|
fpu__init_cpu();
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2008-09-05 03:09:04 +00:00
|
|
|
#endif
|
2013-06-09 10:07:32 +00:00
|
|
|
|
|
|
|
#ifdef CONFIG_X86_DEBUG_STATIC_CPU_HAS
|
|
|
|
void warn_pre_alternatives(void)
|
|
|
|
{
|
|
|
|
WARN(1, "You're using static_cpu_has before alternatives have run!\n");
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(warn_pre_alternatives);
|
|
|
|
#endif
|
2013-06-09 10:07:33 +00:00
|
|
|
|
|
|
|
inline bool __static_cpu_has_safe(u16 bit)
|
|
|
|
{
|
|
|
|
return boot_cpu_has(bit);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(__static_cpu_has_safe);
|