2014-07-18 07:11:40 +00:00
|
|
|
Tegra124 SoC SATA AHCI controller
|
|
|
|
|
|
|
|
|
|
Required properties :
|
2015-01-30 22:11:04 +00:00
|
|
|
- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise,
|
|
|
|
|
must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip>
|
|
|
|
|
is tegra132.
|
2014-07-18 07:11:40 +00:00
|
|
|
- reg : Should contain 2 entries:
|
|
|
|
|
- AHCI register set (SATA BAR5)
|
|
|
|
|
- SATA register set
|
|
|
|
|
- interrupts : Defines the interrupt used by SATA
|
|
|
|
|
- clocks : Must contain an entry for each entry in clock-names.
|
|
|
|
|
See ../clocks/clock-bindings.txt for details.
|
|
|
|
|
- clock-names : Must include the following entries:
|
|
|
|
|
- sata
|
|
|
|
|
- sata-oob
|
|
|
|
|
- cml1
|
|
|
|
|
- pll_e
|
|
|
|
|
- resets : Must contain an entry for each entry in reset-names.
|
|
|
|
|
See ../reset/reset.txt for details.
|
|
|
|
|
- reset-names : Must include the following entries:
|
|
|
|
|
- sata
|
|
|
|
|
- sata-oob
|
|
|
|
|
- sata-cold
|
|
|
|
|
- phys : Must contain an entry for each entry in phy-names.
|
|
|
|
|
See ../phy/phy-bindings.txt for details.
|
|
|
|
|
- phy-names : Must include the following entries:
|
|
|
|
|
- sata-phy : XUSB PADCTL SATA PHY
|
|
|
|
|
- hvdd-supply : Defines the SATA HVDD regulator
|
|
|
|
|
- vddio-supply : Defines the SATA VDDIO regulator
|
|
|
|
|
- avdd-supply : Defines the SATA AVDD regulator
|
|
|
|
|
- target-5v-supply : Defines the SATA 5V power regulator
|
|
|
|
|
- target-12v-supply : Defines the SATA 12V power regulator
|
