of: Add NVIDIA Tegra SATA controller binding

This patch adds device tree binding documentation for the SATA
controller found on NVIDIA Tegra SoCs.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This commit is contained in:
Mikko Perttunen 2014-07-18 10:11:40 +03:00 committed by Tejun Heo
parent 1fc1263bd4
commit 4e6d1bbcc2

View File

@ -0,0 +1,30 @@
Tegra124 SoC SATA AHCI controller
Required properties :
- compatible : "nvidia,tegra124-ahci".
- reg : Should contain 2 entries:
- AHCI register set (SATA BAR5)
- SATA register set
- interrupts : Defines the interrupt used by SATA
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
- sata
- sata-oob
- cml1
- pll_e
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- sata
- sata-oob
- sata-cold
- phys : Must contain an entry for each entry in phy-names.
See ../phy/phy-bindings.txt for details.
- phy-names : Must include the following entries:
- sata-phy : XUSB PADCTL SATA PHY
- hvdd-supply : Defines the SATA HVDD regulator
- vddio-supply : Defines the SATA VDDIO regulator
- avdd-supply : Defines the SATA AVDD regulator
- target-5v-supply : Defines the SATA 5V power regulator
- target-12v-supply : Defines the SATA 12V power regulator