2006-06-17 22:52:48 +00:00
|
|
|
/*
|
2008-10-07 19:00:18 +00:00
|
|
|
* MPC83xx/85xx/86xx PCI/PCIE support routing.
|
2006-06-17 22:52:48 +00:00
|
|
|
*
|
2009-01-08 21:55:39 +00:00
|
|
|
* Copyright 2007-2009 Freescale Semiconductor, Inc.
|
|
|
|
|
* Copyright 2008-2009 MontaVista Software, Inc.
|
2006-06-17 22:52:48 +00:00
|
|
|
*
|
2007-07-10 10:46:35 +00:00
|
|
|
* Initial author: Xianghua Xiao <x.xiao@freescale.com>
|
|
|
|
|
* Recode: ZHANG WEI <wei.zhang@freescale.com>
|
|
|
|
|
* Rewrite the routing for Frescale PCI and PCI Express
|
|
|
|
|
* Roy Zang <tie-fei.zang@freescale.com>
|
2009-01-08 21:55:39 +00:00
|
|
|
* MPC83xx PCI-Express support:
|
|
|
|
|
* Tony Li <tony.li@freescale.com>
|
|
|
|
|
* Anton Vorontsov <avorontsov@ru.mvista.com>
|
2006-06-17 22:52:48 +00:00
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
|
|
|
* option) any later version.
|
|
|
|
|
*/
|
2007-07-10 10:46:35 +00:00
|
|
|
#include <linux/kernel.h>
|
2006-06-17 22:52:48 +00:00
|
|
|
#include <linux/pci.h>
|
2007-07-10 10:46:35 +00:00
|
|
|
#include <linux/delay.h>
|
|
|
|
|
#include <linux/string.h>
|
|
|
|
|
#include <linux/init.h>
|
|
|
|
|
#include <linux/bootmem.h>
|
2006-06-17 22:52:48 +00:00
|
|
|
|
|
|
|
|
#include <asm/io.h>
|
|
|
|
|
#include <asm/prom.h>
|
|
|
|
|
#include <asm/pci-bridge.h>
|
2007-07-10 10:46:35 +00:00
|
|
|
#include <asm/machdep.h>
|
2006-06-17 22:52:48 +00:00
|
|
|
#include <sysdev/fsl_soc.h>
|
2007-07-10 10:44:34 +00:00
|
|
|
#include <sysdev/fsl_pci.h>
|
2006-06-17 22:52:48 +00:00
|
|
|
|
2009-01-08 21:55:39 +00:00
|
|
|
static int fsl_pcie_bus_fixup;
|
|
|
|
|
|
|
|
|
|
static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
|
|
|
|
|
{
|
|
|
|
|
/* if we aren't a PCIe don't bother */
|
|
|
|
|
if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
|
|
|
|
|
fsl_pcie_bus_fixup = 1;
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int __init fsl_pcie_check_link(struct pci_controller *hose)
|
|
|
|
|
{
|
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
|
|
early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
|
|
|
|
|
if (val < PCIE_LTSSM_L0)
|
|
|
|
|
return 1;
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2008-06-26 17:07:57 +00:00
|
|
|
#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
|
powerpc/fsl-pci: Better ATMU setup for 85xx/86xx
The code that sets up the outbound ATMU windows, which is used to map CPU
physical addresses into PCI bus addresses where BARs will be mapped, didn't
work so well.
For one, it leaked the ioremap() of the ATMU registers. Another small bug
was the high 20 bits of the PCI bus address were left as zero. It's legal
for prefetchable memory regions to be above 32 bits, so the high 20 bits
might not be zero.
Mainly, it couldn't handle ranges that were not a power of two in size or
were not naturally aligned. The ATMU windows have these requirements (size
& alignment), but the code didn't bother to check if the ranges it was
programming met them. If they didn't, the windows would silently be
programmed incorrectly.
This new code can handle ranges which are not power of two sized nor
naturally aligned. It simply splits the ranges into multiple valid ATMU
windows. As there are only four windows, pooly aligned or sized ranges
(which didn't even work before) may run out of windows. In this case an
error is printed and an effort is made to disable the unmapped resources.
An improvement that could be made would be to make use of the default
outbound window. Iff hose->pci_mem_offset is zero, then it's possible that
some or all of the ranges might not need an outbound window and could just
use the default window.
The default ATMU window can support a pci_mem_offset less than zero too,
but pci_mem_offset is unsigned. One could say the abilities allowed a
powerpc pci_controller is neither subset nor a superset of the abilities of
a Freescale PCIe controller. Thankfully, the most useful bits are in the
intersection of the two abilities.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-07 04:37:53 +00:00
|
|
|
static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
|
|
|
|
|
unsigned int index, const struct resource *res,
|
|
|
|
|
resource_size_t offset)
|
|
|
|
|
{
|
|
|
|
|
resource_size_t pci_addr = res->start - offset;
|
|
|
|
|
resource_size_t phys_addr = res->start;
|
|
|
|
|
resource_size_t size = res->end - res->start + 1;
|
|
|
|
|
u32 flags = 0x80044000; /* enable & mem R/W */
|
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
|
|
pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
|
|
|
|
|
(u64)res->start, (u64)size);
|
|
|
|
|
|
2008-12-17 19:43:26 +00:00
|
|
|
if (res->flags & IORESOURCE_PREFETCH)
|
|
|
|
|
flags |= 0x10000000; /* enable relaxed ordering */
|
|
|
|
|
|
powerpc/fsl-pci: Better ATMU setup for 85xx/86xx
The code that sets up the outbound ATMU windows, which is used to map CPU
physical addresses into PCI bus addresses where BARs will be mapped, didn't
work so well.
For one, it leaked the ioremap() of the ATMU registers. Another small bug
was the high 20 bits of the PCI bus address were left as zero. It's legal
for prefetchable memory regions to be above 32 bits, so the high 20 bits
might not be zero.
Mainly, it couldn't handle ranges that were not a power of two in size or
were not naturally aligned. The ATMU windows have these requirements (size
& alignment), but the code didn't bother to check if the ranges it was
programming met them. If they didn't, the windows would silently be
programmed incorrectly.
This new code can handle ranges which are not power of two sized nor
naturally aligned. It simply splits the ranges into multiple valid ATMU
windows. As there are only four windows, pooly aligned or sized ranges
(which didn't even work before) may run out of windows. In this case an
error is printed and an effort is made to disable the unmapped resources.
An improvement that could be made would be to make use of the default
outbound window. Iff hose->pci_mem_offset is zero, then it's possible that
some or all of the ranges might not need an outbound window and could just
use the default window.
The default ATMU window can support a pci_mem_offset less than zero too,
but pci_mem_offset is unsigned. One could say the abilities allowed a
powerpc pci_controller is neither subset nor a superset of the abilities of
a Freescale PCIe controller. Thankfully, the most useful bits are in the
intersection of the two abilities.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-07 04:37:53 +00:00
|
|
|
for (i = 0; size > 0; i++) {
|
|
|
|
|
unsigned int bits = min(__ilog2(size),
|
|
|
|
|
__ffs(pci_addr | phys_addr));
|
|
|
|
|
|
|
|
|
|
if (index + i >= 5)
|
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
|
|
out_be32(&pci->pow[index + i].potar, pci_addr >> 12);
|
|
|
|
|
out_be32(&pci->pow[index + i].potear, (u64)pci_addr >> 44);
|
|
|
|
|
out_be32(&pci->pow[index + i].powbar, phys_addr >> 12);
|
|
|
|
|
out_be32(&pci->pow[index + i].powar, flags | (bits - 1));
|
|
|
|
|
|
|
|
|
|
pci_addr += (resource_size_t)1U << bits;
|
|
|
|
|
phys_addr += (resource_size_t)1U << bits;
|
|
|
|
|
size -= (resource_size_t)1U << bits;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return i;
|
|
|
|
|
}
|
|
|
|
|
|
2007-07-10 10:46:35 +00:00
|
|
|
/* atmu setup for fsl pci/pcie controller */
|
2008-12-29 16:40:32 +00:00
|
|
|
static void __init setup_pci_atmu(struct pci_controller *hose,
|
|
|
|
|
struct resource *rsrc)
|
2006-06-17 22:52:48 +00:00
|
|
|
{
|
2007-07-10 10:46:35 +00:00
|
|
|
struct ccsr_pci __iomem *pci;
|
powerpc/fsl-pci: Better ATMU setup for 85xx/86xx
The code that sets up the outbound ATMU windows, which is used to map CPU
physical addresses into PCI bus addresses where BARs will be mapped, didn't
work so well.
For one, it leaked the ioremap() of the ATMU registers. Another small bug
was the high 20 bits of the PCI bus address were left as zero. It's legal
for prefetchable memory regions to be above 32 bits, so the high 20 bits
might not be zero.
Mainly, it couldn't handle ranges that were not a power of two in size or
were not naturally aligned. The ATMU windows have these requirements (size
& alignment), but the code didn't bother to check if the ranges it was
programming met them. If they didn't, the windows would silently be
programmed incorrectly.
This new code can handle ranges which are not power of two sized nor
naturally aligned. It simply splits the ranges into multiple valid ATMU
windows. As there are only four windows, pooly aligned or sized ranges
(which didn't even work before) may run out of windows. In this case an
error is printed and an effort is made to disable the unmapped resources.
An improvement that could be made would be to make use of the default
outbound window. Iff hose->pci_mem_offset is zero, then it's possible that
some or all of the ranges might not need an outbound window and could just
use the default window.
The default ATMU window can support a pci_mem_offset less than zero too,
but pci_mem_offset is unsigned. One could say the abilities allowed a
powerpc pci_controller is neither subset nor a superset of the abilities of
a Freescale PCIe controller. Thankfully, the most useful bits are in the
intersection of the two abilities.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-07 04:37:53 +00:00
|
|
|
int i, j, n;
|
2006-06-17 22:52:48 +00:00
|
|
|
|
2008-01-14 23:02:19 +00:00
|
|
|
pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
|
|
|
|
|
(u64)rsrc->start, (u64)rsrc->end - (u64)rsrc->start + 1);
|
2007-07-10 10:46:35 +00:00
|
|
|
pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
|
powerpc/fsl-pci: Better ATMU setup for 85xx/86xx
The code that sets up the outbound ATMU windows, which is used to map CPU
physical addresses into PCI bus addresses where BARs will be mapped, didn't
work so well.
For one, it leaked the ioremap() of the ATMU registers. Another small bug
was the high 20 bits of the PCI bus address were left as zero. It's legal
for prefetchable memory regions to be above 32 bits, so the high 20 bits
might not be zero.
Mainly, it couldn't handle ranges that were not a power of two in size or
were not naturally aligned. The ATMU windows have these requirements (size
& alignment), but the code didn't bother to check if the ranges it was
programming met them. If they didn't, the windows would silently be
programmed incorrectly.
This new code can handle ranges which are not power of two sized nor
naturally aligned. It simply splits the ranges into multiple valid ATMU
windows. As there are only four windows, pooly aligned or sized ranges
(which didn't even work before) may run out of windows. In this case an
error is printed and an effort is made to disable the unmapped resources.
An improvement that could be made would be to make use of the default
outbound window. Iff hose->pci_mem_offset is zero, then it's possible that
some or all of the ranges might not need an outbound window and could just
use the default window.
The default ATMU window can support a pci_mem_offset less than zero too,
but pci_mem_offset is unsigned. One could say the abilities allowed a
powerpc pci_controller is neither subset nor a superset of the abilities of
a Freescale PCIe controller. Thankfully, the most useful bits are in the
intersection of the two abilities.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-07 04:37:53 +00:00
|
|
|
if (!pci) {
|
|
|
|
|
dev_err(hose->parent, "Unable to map ATMU registers\n");
|
|
|
|
|
return;
|
|
|
|
|
}
|
2007-07-10 10:46:35 +00:00
|
|
|
|
powerpc/fsl-pci: Better ATMU setup for 85xx/86xx
The code that sets up the outbound ATMU windows, which is used to map CPU
physical addresses into PCI bus addresses where BARs will be mapped, didn't
work so well.
For one, it leaked the ioremap() of the ATMU registers. Another small bug
was the high 20 bits of the PCI bus address were left as zero. It's legal
for prefetchable memory regions to be above 32 bits, so the high 20 bits
might not be zero.
Mainly, it couldn't handle ranges that were not a power of two in size or
were not naturally aligned. The ATMU windows have these requirements (size
& alignment), but the code didn't bother to check if the ranges it was
programming met them. If they didn't, the windows would silently be
programmed incorrectly.
This new code can handle ranges which are not power of two sized nor
naturally aligned. It simply splits the ranges into multiple valid ATMU
windows. As there are only four windows, pooly aligned or sized ranges
(which didn't even work before) may run out of windows. In this case an
error is printed and an effort is made to disable the unmapped resources.
An improvement that could be made would be to make use of the default
outbound window. Iff hose->pci_mem_offset is zero, then it's possible that
some or all of the ranges might not need an outbound window and could just
use the default window.
The default ATMU window can support a pci_mem_offset less than zero too,
but pci_mem_offset is unsigned. One could say the abilities allowed a
powerpc pci_controller is neither subset nor a superset of the abilities of
a Freescale PCIe controller. Thankfully, the most useful bits are in the
intersection of the two abilities.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-07 04:37:53 +00:00
|
|
|
/* Disable all windows (except powar0 since it's ignored) */
|
2007-07-10 10:46:35 +00:00
|
|
|
for(i = 1; i < 5; i++)
|
|
|
|
|
out_be32(&pci->pow[i].powar, 0);
|
|
|
|
|
for(i = 0; i < 3; i++)
|
|
|
|
|
out_be32(&pci->piw[i].piwar, 0);
|
|
|
|
|
|
|
|
|
|
/* Setup outbound MEM window */
|
powerpc/fsl-pci: Better ATMU setup for 85xx/86xx
The code that sets up the outbound ATMU windows, which is used to map CPU
physical addresses into PCI bus addresses where BARs will be mapped, didn't
work so well.
For one, it leaked the ioremap() of the ATMU registers. Another small bug
was the high 20 bits of the PCI bus address were left as zero. It's legal
for prefetchable memory regions to be above 32 bits, so the high 20 bits
might not be zero.
Mainly, it couldn't handle ranges that were not a power of two in size or
were not naturally aligned. The ATMU windows have these requirements (size
& alignment), but the code didn't bother to check if the ranges it was
programming met them. If they didn't, the windows would silently be
programmed incorrectly.
This new code can handle ranges which are not power of two sized nor
naturally aligned. It simply splits the ranges into multiple valid ATMU
windows. As there are only four windows, pooly aligned or sized ranges
(which didn't even work before) may run out of windows. In this case an
error is printed and an effort is made to disable the unmapped resources.
An improvement that could be made would be to make use of the default
outbound window. Iff hose->pci_mem_offset is zero, then it's possible that
some or all of the ranges might not need an outbound window and could just
use the default window.
The default ATMU window can support a pci_mem_offset less than zero too,
but pci_mem_offset is unsigned. One could say the abilities allowed a
powerpc pci_controller is neither subset nor a superset of the abilities of
a Freescale PCIe controller. Thankfully, the most useful bits are in the
intersection of the two abilities.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-07 04:37:53 +00:00
|
|
|
for(i = 0, j = 1; i < 3; i++) {
|
|
|
|
|
if (!(hose->mem_resources[i].flags & IORESOURCE_MEM))
|
|
|
|
|
continue;
|
|
|
|
|
|
|
|
|
|
n = setup_one_atmu(pci, j, &hose->mem_resources[i],
|
|
|
|
|
hose->pci_mem_offset);
|
|
|
|
|
|
|
|
|
|
if (n < 0 || j >= 5) {
|
|
|
|
|
pr_err("Ran out of outbound PCI ATMUs for resource %d!\n", i);
|
|
|
|
|
hose->mem_resources[i].flags |= IORESOURCE_DISABLED;
|
|
|
|
|
} else
|
|
|
|
|
j += n;
|
|
|
|
|
}
|
2007-07-10 10:46:35 +00:00
|
|
|
|
|
|
|
|
/* Setup outbound IO window */
|
powerpc/fsl-pci: Better ATMU setup for 85xx/86xx
The code that sets up the outbound ATMU windows, which is used to map CPU
physical addresses into PCI bus addresses where BARs will be mapped, didn't
work so well.
For one, it leaked the ioremap() of the ATMU registers. Another small bug
was the high 20 bits of the PCI bus address were left as zero. It's legal
for prefetchable memory regions to be above 32 bits, so the high 20 bits
might not be zero.
Mainly, it couldn't handle ranges that were not a power of two in size or
were not naturally aligned. The ATMU windows have these requirements (size
& alignment), but the code didn't bother to check if the ranges it was
programming met them. If they didn't, the windows would silently be
programmed incorrectly.
This new code can handle ranges which are not power of two sized nor
naturally aligned. It simply splits the ranges into multiple valid ATMU
windows. As there are only four windows, pooly aligned or sized ranges
(which didn't even work before) may run out of windows. In this case an
error is printed and an effort is made to disable the unmapped resources.
An improvement that could be made would be to make use of the default
outbound window. Iff hose->pci_mem_offset is zero, then it's possible that
some or all of the ranges might not need an outbound window and could just
use the default window.
The default ATMU window can support a pci_mem_offset less than zero too,
but pci_mem_offset is unsigned. One could say the abilities allowed a
powerpc pci_controller is neither subset nor a superset of the abilities of
a Freescale PCIe controller. Thankfully, the most useful bits are in the
intersection of the two abilities.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-07 04:37:53 +00:00
|
|
|
if (hose->io_resource.flags & IORESOURCE_IO) {
|
|
|
|
|
if (j >= 5) {
|
|
|
|
|
pr_err("Ran out of outbound PCI ATMUs for IO resource\n");
|
|
|
|
|
} else {
|
|
|
|
|
pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
|
|
|
|
|
"phy base 0x%016llx.\n",
|
|
|
|
|
(u64)hose->io_resource.start,
|
|
|
|
|
(u64)hose->io_resource.end - (u64)hose->io_resource.start + 1,
|
|
|
|
|
(u64)hose->io_base_phys);
|
|
|
|
|
out_be32(&pci->pow[j].potar, (hose->io_resource.start >> 12));
|
|
|
|
|
out_be32(&pci->pow[j].potear, 0);
|
|
|
|
|
out_be32(&pci->pow[j].powbar, (hose->io_base_phys >> 12));
|
|
|
|
|
/* Enable, IO R/W */
|
|
|
|
|
out_be32(&pci->pow[j].powar, 0x80088000
|
|
|
|
|
| (__ilog2(hose->io_resource.end
|
|
|
|
|
- hose->io_resource.start + 1) - 1));
|
|
|
|
|
}
|
2007-07-10 10:46:35 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Setup 2G inbound Memory Window @ 1 */
|
|
|
|
|
out_be32(&pci->piw[2].pitar, 0x00000000);
|
|
|
|
|
out_be32(&pci->piw[2].piwbar,0x00000000);
|
|
|
|
|
out_be32(&pci->piw[2].piwar, PIWAR_2G);
|
powerpc/fsl-pci: Better ATMU setup for 85xx/86xx
The code that sets up the outbound ATMU windows, which is used to map CPU
physical addresses into PCI bus addresses where BARs will be mapped, didn't
work so well.
For one, it leaked the ioremap() of the ATMU registers. Another small bug
was the high 20 bits of the PCI bus address were left as zero. It's legal
for prefetchable memory regions to be above 32 bits, so the high 20 bits
might not be zero.
Mainly, it couldn't handle ranges that were not a power of two in size or
were not naturally aligned. The ATMU windows have these requirements (size
& alignment), but the code didn't bother to check if the ranges it was
programming met them. If they didn't, the windows would silently be
programmed incorrectly.
This new code can handle ranges which are not power of two sized nor
naturally aligned. It simply splits the ranges into multiple valid ATMU
windows. As there are only four windows, pooly aligned or sized ranges
(which didn't even work before) may run out of windows. In this case an
error is printed and an effort is made to disable the unmapped resources.
An improvement that could be made would be to make use of the default
outbound window. Iff hose->pci_mem_offset is zero, then it's possible that
some or all of the ranges might not need an outbound window and could just
use the default window.
The default ATMU window can support a pci_mem_offset less than zero too,
but pci_mem_offset is unsigned. One could say the abilities allowed a
powerpc pci_controller is neither subset nor a superset of the abilities of
a Freescale PCIe controller. Thankfully, the most useful bits are in the
intersection of the two abilities.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-07 04:37:53 +00:00
|
|
|
|
2009-04-20 16:26:48 +00:00
|
|
|
/* Save the base address and size covered by inbound window mappings */
|
|
|
|
|
hose->dma_window_base_cur = 0x00000000;
|
|
|
|
|
hose->dma_window_size = 0x80000000;
|
|
|
|
|
|
powerpc/fsl-pci: Better ATMU setup for 85xx/86xx
The code that sets up the outbound ATMU windows, which is used to map CPU
physical addresses into PCI bus addresses where BARs will be mapped, didn't
work so well.
For one, it leaked the ioremap() of the ATMU registers. Another small bug
was the high 20 bits of the PCI bus address were left as zero. It's legal
for prefetchable memory regions to be above 32 bits, so the high 20 bits
might not be zero.
Mainly, it couldn't handle ranges that were not a power of two in size or
were not naturally aligned. The ATMU windows have these requirements (size
& alignment), but the code didn't bother to check if the ranges it was
programming met them. If they didn't, the windows would silently be
programmed incorrectly.
This new code can handle ranges which are not power of two sized nor
naturally aligned. It simply splits the ranges into multiple valid ATMU
windows. As there are only four windows, pooly aligned or sized ranges
(which didn't even work before) may run out of windows. In this case an
error is printed and an effort is made to disable the unmapped resources.
An improvement that could be made would be to make use of the default
outbound window. Iff hose->pci_mem_offset is zero, then it's possible that
some or all of the ranges might not need an outbound window and could just
use the default window.
The default ATMU window can support a pci_mem_offset less than zero too,
but pci_mem_offset is unsigned. One could say the abilities allowed a
powerpc pci_controller is neither subset nor a superset of the abilities of
a Freescale PCIe controller. Thankfully, the most useful bits are in the
intersection of the two abilities.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-07 04:37:53 +00:00
|
|
|
iounmap(pci);
|
2006-06-17 22:52:48 +00:00
|
|
|
}
|
|
|
|
|
|
2008-12-29 16:40:32 +00:00
|
|
|
static void __init setup_pci_cmd(struct pci_controller *hose)
|
2006-06-17 22:52:48 +00:00
|
|
|
{
|
|
|
|
|
u16 cmd;
|
2007-07-20 21:29:09 +00:00
|
|
|
int cap_x;
|
|
|
|
|
|
2006-06-17 22:52:48 +00:00
|
|
|
early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
|
|
|
|
|
cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
|
2007-07-10 10:46:35 +00:00
|
|
|
| PCI_COMMAND_IO;
|
2006-06-17 22:52:48 +00:00
|
|
|
early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
|
2007-07-20 21:29:09 +00:00
|
|
|
|
|
|
|
|
cap_x = early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX);
|
|
|
|
|
if (cap_x) {
|
|
|
|
|
int pci_x_cmd = cap_x + PCI_X_CMD;
|
|
|
|
|
cmd = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
|
|
|
|
|
| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
|
|
|
|
|
early_write_config_word(hose, 0, 0, pci_x_cmd, cmd);
|
|
|
|
|
} else {
|
|
|
|
|
early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
|
|
|
|
|
}
|
2006-06-28 05:37:45 +00:00
|
|
|
}
|
|
|
|
|
|
2008-05-23 13:41:02 +00:00
|
|
|
static void __init setup_pci_pcsrbar(struct pci_controller *hose)
|
2008-05-23 08:32:46 +00:00
|
|
|
{
|
2008-05-23 13:41:02 +00:00
|
|
|
#ifdef CONFIG_PCI_MSI
|
2008-05-23 08:32:46 +00:00
|
|
|
phys_addr_t immr_base;
|
|
|
|
|
|
|
|
|
|
immr_base = get_immrbase();
|
|
|
|
|
early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, immr_base);
|
|
|
|
|
#endif
|
2008-05-23 13:41:02 +00:00
|
|
|
}
|
2008-05-23 08:32:46 +00:00
|
|
|
|
2007-07-19 20:29:53 +00:00
|
|
|
void fsl_pcibios_fixup_bus(struct pci_bus *bus)
|
|
|
|
|
{
|
|
|
|
|
struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
|
|
|
|
|
int i;
|
|
|
|
|
|
2008-01-14 23:02:19 +00:00
|
|
|
if ((bus->parent == hose->bus) &&
|
|
|
|
|
((fsl_pcie_bus_fixup &&
|
|
|
|
|
early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) ||
|
|
|
|
|
(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)))
|
|
|
|
|
{
|
|
|
|
|
for (i = 0; i < 4; ++i) {
|
|
|
|
|
struct resource *res = bus->resource[i];
|
|
|
|
|
struct resource *par = bus->parent->resource[i];
|
|
|
|
|
if (res) {
|
|
|
|
|
res->start = 0;
|
|
|
|
|
res->end = 0;
|
|
|
|
|
res->flags = 0;
|
|
|
|
|
}
|
|
|
|
|
if (res && par) {
|
|
|
|
|
res->start = par->start;
|
|
|
|
|
res->end = par->end;
|
|
|
|
|
res->flags = par->flags;
|
|
|
|
|
}
|
2007-07-19 20:29:53 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2007-07-10 10:46:35 +00:00
|
|
|
int __init fsl_add_bridge(struct device_node *dev, int is_primary)
|
2006-06-17 22:52:48 +00:00
|
|
|
{
|
|
|
|
|
int len;
|
|
|
|
|
struct pci_controller *hose;
|
|
|
|
|
struct resource rsrc;
|
2006-07-12 05:39:42 +00:00
|
|
|
const int *bus_range;
|
2006-06-17 22:52:48 +00:00
|
|
|
|
2007-07-10 10:46:35 +00:00
|
|
|
pr_debug("Adding PCI host bridge %s\n", dev->full_name);
|
2006-06-17 22:52:48 +00:00
|
|
|
|
|
|
|
|
/* Fetch host bridge registers address */
|
2007-07-10 10:46:35 +00:00
|
|
|
if (of_address_to_resource(dev, 0, &rsrc)) {
|
|
|
|
|
printk(KERN_WARNING "Can't get pci register base!");
|
|
|
|
|
return -ENOMEM;
|
|
|
|
|
}
|
2006-06-17 22:52:48 +00:00
|
|
|
|
|
|
|
|
/* Get bus range if any */
|
2007-04-03 12:26:41 +00:00
|
|
|
bus_range = of_get_property(dev, "bus-range", &len);
|
2006-06-17 22:52:48 +00:00
|
|
|
if (bus_range == NULL || len < 2 * sizeof(int))
|
|
|
|
|
printk(KERN_WARNING "Can't get bus-range for %s, assume"
|
2007-07-10 10:46:35 +00:00
|
|
|
" bus 0\n", dev->full_name);
|
2006-06-17 22:52:48 +00:00
|
|
|
|
2008-12-11 09:46:44 +00:00
|
|
|
ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS);
|
2007-06-27 06:56:50 +00:00
|
|
|
hose = pcibios_alloc_controller(dev);
|
2006-06-17 22:52:48 +00:00
|
|
|
if (!hose)
|
|
|
|
|
return -ENOMEM;
|
2007-06-27 06:56:50 +00:00
|
|
|
|
2006-06-17 22:52:48 +00:00
|
|
|
hose->first_busno = bus_range ? bus_range[0] : 0x0;
|
2007-05-22 03:38:26 +00:00
|
|
|
hose->last_busno = bus_range ? bus_range[1] : 0xff;
|
2006-06-17 22:52:48 +00:00
|
|
|
|
2007-07-19 21:07:35 +00:00
|
|
|
setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
|
|
|
|
|
PPC_INDIRECT_TYPE_BIG_ENDIAN);
|
2007-07-10 10:46:35 +00:00
|
|
|
setup_pci_cmd(hose);
|
2006-06-17 22:52:48 +00:00
|
|
|
|
2007-07-10 10:46:35 +00:00
|
|
|
/* check PCI express link status */
|
2007-07-11 18:31:58 +00:00
|
|
|
if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
|
2007-07-25 05:29:53 +00:00
|
|
|
hose->indirect_type |= PPC_INDIRECT_TYPE_EXT_REG |
|
2007-07-11 18:31:58 +00:00
|
|
|
PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
|
2007-07-10 10:46:35 +00:00
|
|
|
if (fsl_pcie_check_link(hose))
|
2007-07-11 18:31:58 +00:00
|
|
|
hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
|
|
|
|
|
}
|
2006-06-17 22:52:48 +00:00
|
|
|
|
2007-11-20 01:47:55 +00:00
|
|
|
printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
|
2007-07-10 10:46:35 +00:00
|
|
|
"Firmware bus number: %d->%d\n",
|
|
|
|
|
(unsigned long long)rsrc.start, hose->first_busno,
|
|
|
|
|
hose->last_busno);
|
2006-06-17 22:52:48 +00:00
|
|
|
|
2007-07-10 10:46:35 +00:00
|
|
|
pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
|
2006-06-17 22:52:48 +00:00
|
|
|
hose, hose->cfg_addr, hose->cfg_data);
|
|
|
|
|
|
|
|
|
|
/* Interpret the "ranges" property */
|
|
|
|
|
/* This also maps the I/O region and sets isa_io/mem_base */
|
2007-07-10 10:46:35 +00:00
|
|
|
pci_process_bridge_OF_ranges(hose, dev, is_primary);
|
2006-06-17 22:52:48 +00:00
|
|
|
|
|
|
|
|
/* Setup PEX window registers */
|
2007-07-10 10:46:35 +00:00
|
|
|
setup_pci_atmu(hose, &rsrc);
|
2006-06-17 22:52:48 +00:00
|
|
|
|
2008-05-23 08:32:46 +00:00
|
|
|
/* Setup PEXCSRBAR */
|
|
|
|
|
setup_pci_pcsrbar(hose);
|
2006-06-17 22:52:48 +00:00
|
|
|
return 0;
|
|
|
|
|
}
|
2007-07-10 10:46:35 +00:00
|
|
|
|
2008-01-14 23:02:19 +00:00
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548E, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543E, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_header);
|
2009-05-02 02:16:47 +00:00
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8569E, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8569, quirk_fsl_pcie_header);
|
2008-01-14 23:02:19 +00:00
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_header);
|
2008-07-02 06:36:15 +00:00
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536E, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header);
|
2008-01-14 23:02:19 +00:00
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
|
2009-04-15 19:38:40 +00:00
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020E, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020, quirk_fsl_pcie_header);
|
2008-06-26 17:07:57 +00:00
|
|
|
#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
|
|
|
|
|
|
2008-10-07 21:13:18 +00:00
|
|
|
#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
|
2009-01-08 21:55:39 +00:00
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315E, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8377E, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8377, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8378E, quirk_fsl_pcie_header);
|
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8378, quirk_fsl_pcie_header);
|
|
|
|
|
|
|
|
|
|
struct mpc83xx_pcie_priv {
|
|
|
|
|
void __iomem *cfg_type0;
|
|
|
|
|
void __iomem *cfg_type1;
|
|
|
|
|
u32 dev_base;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* With the convention of u-boot, the PCIE outbound window 0 serves
|
|
|
|
|
* as configuration transactions outbound.
|
|
|
|
|
*/
|
|
|
|
|
#define PEX_OUTWIN0_BAR 0xCA4
|
|
|
|
|
#define PEX_OUTWIN0_TAL 0xCA8
|
|
|
|
|
#define PEX_OUTWIN0_TAH 0xCAC
|
|
|
|
|
|
|
|
|
|
static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn)
|
|
|
|
|
{
|
|
|
|
|
struct pci_controller *hose = bus->sysdata;
|
|
|
|
|
|
|
|
|
|
if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)
|
|
|
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
|
/*
|
|
|
|
|
* Workaround for the HW bug: for Type 0 configure transactions the
|
|
|
|
|
* PCI-E controller does not check the device number bits and just
|
|
|
|
|
* assumes that the device number bits are 0.
|
|
|
|
|
*/
|
|
|
|
|
if (bus->number == hose->first_busno ||
|
|
|
|
|
bus->primary == hose->first_busno) {
|
|
|
|
|
if (devfn & 0xf8)
|
|
|
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (ppc_md.pci_exclude_device) {
|
|
|
|
|
if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
|
|
|
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus,
|
|
|
|
|
unsigned int devfn, int offset)
|
|
|
|
|
{
|
|
|
|
|
struct pci_controller *hose = bus->sysdata;
|
|
|
|
|
struct mpc83xx_pcie_priv *pcie = hose->dn->data;
|
|
|
|
|
u8 bus_no = bus->number - hose->first_busno;
|
|
|
|
|
u32 dev_base = bus_no << 24 | devfn << 16;
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
ret = mpc83xx_pcie_exclude_device(bus, devfn);
|
|
|
|
|
if (ret)
|
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
|
|
offset &= 0xfff;
|
|
|
|
|
|
|
|
|
|
/* Type 0 */
|
|
|
|
|
if (bus->number == hose->first_busno)
|
|
|
|
|
return pcie->cfg_type0 + offset;
|
|
|
|
|
|
|
|
|
|
if (pcie->dev_base == dev_base)
|
|
|
|
|
goto mapped;
|
|
|
|
|
|
|
|
|
|
out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, dev_base);
|
|
|
|
|
|
|
|
|
|
pcie->dev_base = dev_base;
|
|
|
|
|
mapped:
|
|
|
|
|
return pcie->cfg_type1 + offset;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
|
|
|
|
|
int offset, int len, u32 *val)
|
|
|
|
|
{
|
|
|
|
|
void __iomem *cfg_addr;
|
|
|
|
|
|
|
|
|
|
cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
|
|
|
|
|
if (!cfg_addr)
|
|
|
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
|
|
|
|
|
|
switch (len) {
|
|
|
|
|
case 1:
|
|
|
|
|
*val = in_8(cfg_addr);
|
|
|
|
|
break;
|
|
|
|
|
case 2:
|
|
|
|
|
*val = in_le16(cfg_addr);
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
*val = in_le32(cfg_addr);
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
|
|
|
|
|
int offset, int len, u32 val)
|
|
|
|
|
{
|
|
|
|
|
void __iomem *cfg_addr;
|
|
|
|
|
|
|
|
|
|
cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
|
|
|
|
|
if (!cfg_addr)
|
|
|
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
|
|
|
|
|
|
switch (len) {
|
|
|
|
|
case 1:
|
|
|
|
|
out_8(cfg_addr, val);
|
|
|
|
|
break;
|
|
|
|
|
case 2:
|
|
|
|
|
out_le16(cfg_addr, val);
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
out_le32(cfg_addr, val);
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static struct pci_ops mpc83xx_pcie_ops = {
|
|
|
|
|
.read = mpc83xx_pcie_read_config,
|
|
|
|
|
.write = mpc83xx_pcie_write_config,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int __init mpc83xx_pcie_setup(struct pci_controller *hose,
|
|
|
|
|
struct resource *reg)
|
|
|
|
|
{
|
|
|
|
|
struct mpc83xx_pcie_priv *pcie;
|
|
|
|
|
u32 cfg_bar;
|
|
|
|
|
int ret = -ENOMEM;
|
|
|
|
|
|
|
|
|
|
pcie = zalloc_maybe_bootmem(sizeof(*pcie), GFP_KERNEL);
|
|
|
|
|
if (!pcie)
|
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
|
|
pcie->cfg_type0 = ioremap(reg->start, resource_size(reg));
|
|
|
|
|
if (!pcie->cfg_type0)
|
|
|
|
|
goto err0;
|
|
|
|
|
|
|
|
|
|
cfg_bar = in_le32(pcie->cfg_type0 + PEX_OUTWIN0_BAR);
|
|
|
|
|
if (!cfg_bar) {
|
|
|
|
|
/* PCI-E isn't configured. */
|
|
|
|
|
ret = -ENODEV;
|
|
|
|
|
goto err1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pcie->cfg_type1 = ioremap(cfg_bar, 0x1000);
|
|
|
|
|
if (!pcie->cfg_type1)
|
|
|
|
|
goto err1;
|
|
|
|
|
|
|
|
|
|
WARN_ON(hose->dn->data);
|
|
|
|
|
hose->dn->data = pcie;
|
|
|
|
|
hose->ops = &mpc83xx_pcie_ops;
|
|
|
|
|
|
|
|
|
|
out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAH, 0);
|
|
|
|
|
out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, 0);
|
|
|
|
|
|
|
|
|
|
if (fsl_pcie_check_link(hose))
|
|
|
|
|
hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
err1:
|
|
|
|
|
iounmap(pcie->cfg_type0);
|
|
|
|
|
err0:
|
|
|
|
|
kfree(pcie);
|
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
2008-06-26 17:07:57 +00:00
|
|
|
int __init mpc83xx_add_bridge(struct device_node *dev)
|
|
|
|
|
{
|
2009-01-08 21:55:39 +00:00
|
|
|
int ret;
|
2008-06-26 17:07:57 +00:00
|
|
|
int len;
|
|
|
|
|
struct pci_controller *hose;
|
2008-10-07 19:00:18 +00:00
|
|
|
struct resource rsrc_reg;
|
|
|
|
|
struct resource rsrc_cfg;
|
2008-06-26 17:07:57 +00:00
|
|
|
const int *bus_range;
|
2008-10-07 19:00:18 +00:00
|
|
|
int primary;
|
2008-06-26 17:07:57 +00:00
|
|
|
|
2009-01-08 21:55:39 +00:00
|
|
|
if (!of_device_is_available(dev)) {
|
|
|
|
|
pr_warning("%s: disabled by the firmware.\n",
|
|
|
|
|
dev->full_name);
|
|
|
|
|
return -ENODEV;
|
|
|
|
|
}
|
2008-06-26 17:07:57 +00:00
|
|
|
pr_debug("Adding PCI host bridge %s\n", dev->full_name);
|
|
|
|
|
|
|
|
|
|
/* Fetch host bridge registers address */
|
2008-10-07 19:00:18 +00:00
|
|
|
if (of_address_to_resource(dev, 0, &rsrc_reg)) {
|
|
|
|
|
printk(KERN_WARNING "Can't get pci register base!\n");
|
|
|
|
|
return -ENOMEM;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
memset(&rsrc_cfg, 0, sizeof(rsrc_cfg));
|
|
|
|
|
|
|
|
|
|
if (of_address_to_resource(dev, 1, &rsrc_cfg)) {
|
|
|
|
|
printk(KERN_WARNING
|
|
|
|
|
"No pci config register base in dev tree, "
|
|
|
|
|
"using default\n");
|
|
|
|
|
/*
|
|
|
|
|
* MPC83xx supports up to two host controllers
|
|
|
|
|
* one at 0x8500 has config space registers at 0x8300
|
|
|
|
|
* one at 0x8600 has config space registers at 0x8380
|
|
|
|
|
*/
|
|
|
|
|
if ((rsrc_reg.start & 0xfffff) == 0x8500)
|
|
|
|
|
rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8300;
|
|
|
|
|
else if ((rsrc_reg.start & 0xfffff) == 0x8600)
|
|
|
|
|
rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8380;
|
|
|
|
|
}
|
|
|
|
|
/*
|
|
|
|
|
* Controller at offset 0x8500 is primary
|
|
|
|
|
*/
|
|
|
|
|
if ((rsrc_reg.start & 0xfffff) == 0x8500)
|
|
|
|
|
primary = 1;
|
|
|
|
|
else
|
|
|
|
|
primary = 0;
|
2008-06-26 17:07:57 +00:00
|
|
|
|
|
|
|
|
/* Get bus range if any */
|
|
|
|
|
bus_range = of_get_property(dev, "bus-range", &len);
|
|
|
|
|
if (bus_range == NULL || len < 2 * sizeof(int)) {
|
|
|
|
|
printk(KERN_WARNING "Can't get bus-range for %s, assume"
|
|
|
|
|
" bus 0\n", dev->full_name);
|
|
|
|
|
}
|
|
|
|
|
|
2008-12-11 09:46:44 +00:00
|
|
|
ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS);
|
2008-06-26 17:07:57 +00:00
|
|
|
hose = pcibios_alloc_controller(dev);
|
|
|
|
|
if (!hose)
|
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
|
|
hose->first_busno = bus_range ? bus_range[0] : 0;
|
|
|
|
|
hose->last_busno = bus_range ? bus_range[1] : 0xff;
|
|
|
|
|
|
2009-01-08 21:55:39 +00:00
|
|
|
if (of_device_is_compatible(dev, "fsl,mpc8314-pcie")) {
|
|
|
|
|
ret = mpc83xx_pcie_setup(hose, &rsrc_reg);
|
|
|
|
|
if (ret)
|
|
|
|
|
goto err0;
|
|
|
|
|
} else {
|
|
|
|
|
setup_indirect_pci(hose, rsrc_cfg.start,
|
|
|
|
|
rsrc_cfg.start + 4, 0);
|
|
|
|
|
}
|
2008-06-26 17:07:57 +00:00
|
|
|
|
2008-10-07 21:13:18 +00:00
|
|
|
printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
|
2008-06-26 17:07:57 +00:00
|
|
|
"Firmware bus number: %d->%d\n",
|
2008-10-07 19:00:18 +00:00
|
|
|
(unsigned long long)rsrc_reg.start, hose->first_busno,
|
2008-06-26 17:07:57 +00:00
|
|
|
hose->last_busno);
|
|
|
|
|
|
|
|
|
|
pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
|
|
|
|
|
hose, hose->cfg_addr, hose->cfg_data);
|
|
|
|
|
|
|
|
|
|
/* Interpret the "ranges" property */
|
|
|
|
|
/* This also maps the I/O region and sets isa_io/mem_base */
|
|
|
|
|
pci_process_bridge_OF_ranges(hose, dev, primary);
|
|
|
|
|
|
|
|
|
|
return 0;
|
2009-01-08 21:55:39 +00:00
|
|
|
err0:
|
|
|
|
|
pcibios_free_controller(hose);
|
|
|
|
|
return ret;
|
2008-06-26 17:07:57 +00:00
|
|
|
}
|
|
|
|
|
#endif /* CONFIG_PPC_83xx */
|
