Currently the exclusivity is enabled when the rate is set by
the mode setting functions. These functions are called by
mode_set_nofb callback of drm_crc_helper. Then exclusivity
is disabled when tcon is disabled by atomic_disable
callback.
What happens is that mode_set_nofb can be called once when
mode changes, and afterwards the system can call atomic_enable
and atomic_disable multiple times without further calls to
mode_set_nofb.
This happens:
mode_set_nofb - clk exclusivity is enabled
atomic_enable
atomic_disable - clk exclusivity is disabled
atomic_enable
atomic_disable - clk exclusivity is already disabled, leading to WARN
in clk_rate_exclusive_put
Solution is to enable exclusivity in sun4i_tcon_channel_set_status.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180310110511.14697-1-megous@megous.com
Fixes the following sparse warnings:
drivers/gpu/drm/panel/panel-ilitek-ili9322.c:182:12: warning:
symbol 'ili9322_inputs' was not declared. Should it be static?
drivers/gpu/drm/panel/panel-ilitek-ili9322.c:343:28: warning:
symbol 'ili9322_regmap_config' was not declared. Should it be static?
Also change ili9322_inputs to 'const char * const' to avoid
chackpatch warning.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1514948938-19996-1-git-send-email-weiyongjun1@huawei.com
Currently MHL chip must be turned on permanently to detect MHL cable. It
duplicates micro-USB controller's (MUIC) functionality and consumes
unnecessary power. Lets use extcon attached to MUIC to enable MHL chip
only if it detects MHL cable.
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
tasklet_kill() will spin waiting for the current tasklet to be executed.
However, if tasklet_disable() has been called, then the tasklet is never
executed but permanently put back onto the runlist until
tasklet_enable() is called. Ergo, we cannot use tasklet_kill() inside a
disable/enable pair. This is the case when we call set-wedge from inside
i915_reset(), and another request was submitted to us concurrent to the
reset.
Fixes: 963ddd63c3 ("drm/i915: Suspend submission tasklets around wedging")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180307134226.25492-6-chris@chris-wilson.co.uk
When populating shadow ctx from guest, we should handle oa related
registers in hw ctx, so that they will not be overlapped by guest oa
configs. This patch made it possible to capture oa data from host for
both host and guests.
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
If user continuously create vgpu, boot guest, shoutdown guest and destroy
vgpu from remote, the following calltrace exists in dmesg sometimes:
[ 6412.954721] RPM wakelock ref not held during HW access
[ 6412.954795] WARNING: CPU: 7 PID: 11941 at
linux/drivers/gpu/drm/i915/intel_drv.h:1800
intel_uncore_forcewake_get.part.7+0x96/0xa0 [i915]
[ 6412.954915] Call Trace:
[ 6412.954951] intel_uncore_forcewake_get+0x18/0x20 [i915]
[ 6412.954989] intel_gvt_switch_mmio+0x8e/0x770 [i915]
[ 6412.954996] ? __slab_free+0x14d/0x2c0
[ 6412.955001] ? __slab_free+0x14d/0x2c0
[ 6412.955006] ? __slab_free+0x14d/0x2c0
[ 6412.955041] intel_vgpu_stop_schedule+0x92/0xd0 [i915]
[ 6412.955073] intel_gvt_deactivate_vgpu+0x48/0x60 [i915]
[ 6412.955078] __intel_vgpu_release+0x55/0x260 [kvmgt]
when this happens, gvt_switch_mmio is called at vgpu destroy, host i915 is
idle and doesn't hold RPM wakelock, igd is in powersave mode, but
gvt_switch_mmio require igd power on to access register, so
intel_runtime_pm_get should be added to make sure igd power on before
gvt_switch_mmio.
v2: Move runtime_pm_get/put into gvt_switch_mmio.(Zhenyu)
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
etnaviv_sched_dependency() and etnaviv_sched_run_job() are only
used in this file, so make them static.
This fixes the following sparse warnings:
drivers/gpu/drm/etnaviv/etnaviv_sched.c:30:18: warning: symbol 'etnaviv_sched_dependency' was not declared. Should it be static?
drivers/gpu/drm/etnaviv/etnaviv_sched.c:81:18: warning: symbol 'etnaviv_sched_run_job' was not declared. Should it be static?
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The Page Table Array is a new first level structure above the MTLB
availabale on GPUs with the security feature. Use the PTa to set up
the MMU when the security related states are handled by the kernel driver.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
On GPUs with the security feature the MTLB config is stored in the PTA.
Add a function to trigger the initial PTA load through the FE.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
GPUs with support for the security features need some additional
setup to get the frontend started.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
With the introduction of GPU security we have 3 different modes of
GPU operation:
- GPU core doesn't have security features -> no handling required
- the security related states are handled by the kernel driver
- the security related states are handled by a TrustZone application
Add a enum to differentiate between the different operation modes.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
New versions of the Vivante kernel driver don't trust the hardware feature
bits anymore, but use an internal hardware database. This also includes
more feature fields than are available in hardware.
As we can't trust the hardware feature bits to be correct anymore, we need
to replicate the HWDB in etanviv. For now only the GC7000L as found on
the i.MX8M is supported.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Update the state HI and common header from rnndb commit
8478eef32fd9 (rnndb: document secure GPU reset bit).
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The slave interface clock is a clock input found on newer cores to gate
the register interface. For now we simply ungate it when the GPU is in
active state.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Split out the fault dumping, as this will get more complex in the future.
Also there is no need to read and dump the fault address from MMUs that
didn't signal a fault.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Originally we were inlining gen8_cs_irq_handler() and so expected the
compiler to constant-fold away the irq_shift (so we had hardcoded it as
opposed to use engine->irq_shift). However, we dropped the inline given
the proliferation of gen8_cs_irq_handler()s. If we pull the shifting
of the iir into the caller, we can shrink the code still further:
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-34 (-34)
Function old new delta
gen8_cs_irq_handler 123 118 -5
gen8_gt_irq_handler 261 248 -13
gen11_irq_handler 722 706 -16
v2: Drop gen11_cs_irq_handler now that it is a simple
stub around gen8_cs_irq_handler (Daniele)
References: 5d3d69d5c1 ("drm/i915: Stop inlining the execlists IRQ handler")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180309010808.11921-1-chris@chris-wilson.co.uk
More stuff for 4.17. Highlights:
- More fixes for "wattman" like functionality (fine grained clk/voltage control)
- Add more power profile infrastucture (context based dpm)
- SR-IOV fixes
- Add iomem debugging interface for use with umr
- Powerplay and cgs cleanups
- DC fixes and cleanups
- ttm improvements
- Misc cleanups all over
* 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (143 commits)
drm/amdgpu:Always save uvd vcpu_bo in VM Mode
drm/amdgpu:Correct max uvd handles
drm/amdgpu: replace iova debugfs file with iomem (v3)
drm/amd/display: validate plane format on primary plane
drm/amdgpu: Clean sdma wptr register when only enable wptr polling
drm/amd/amdgpu: re-add missing GC 9.1 and SDMA0 4.1 sh_mask header files
drm/amdgpu: give warning before sleep in kiq_r/wreg
drm/amdgpu: further mitigate workaround for i915
drm/amdgpu: drop gtt->adev
drm/amdgpu: add amdgpu_evict_gtt debugfs entry
drm/amd/pp: Add #ifdef checks for CONFIG_ACPI
drm/amd/pp: fix "Delete the wrapper layer of smu_allocate/free_memory"
drm/amd/pp: Drop wrapper functions for upper/lower_32_bits
drm/amdgpu: Delete cgs wrapper functions for gpu memory manager
drm/amd/pp: Delete the wrapper layer of smu_allocate/free_memory
drm/amd/pp: Remove cgs wrapper function for temperature update
Revert "drm/amd/pp: Add a pp feature mask bit for AutoWattman feature"
drm/amd/pp: Add auto power profilng switch based on workloads (v2)
drm/amd/pp: Revert gfx/compute profile switch sysfs
drm/amd/pp: Fix sclk in highest two levels when compute on smu7
...
Fixes for 4.16. A bit bigger than I would have liked, but most of that
is DC fixes which Harry helped me pull together from the past few weeks.
Highlights:
- Fix DL DVI with DC
- Various RV fixes for DC
- Overlay fixes for DC
- Fix HDMI2 handling on boards without HBR tables in the vbios
- Fix crash with pass-through on SI on amdgpu
- Fix RB harvesting on KV
- Fix hibernation failures on UVD with certain cards
* 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux: (35 commits)
drm/amd/display: validate plane format on primary plane
drm/amdgpu:Always save uvd vcpu_bo in VM Mode
drm/amdgpu:Correct max uvd handles
drm/amd/display: early return if not in vga mode in disable_vga
drm/amd/display: Fix takover from VGA mode
drm/amd/display: Fix memleaks when atomic check fails.
drm/amd/display: Return success when enabling interrupt
drm/amd/display: Use crtc enable/disable_vblank hooks
drm/amd/display: update infoframe after dig fe is turned on
drm/amd/display: fix boot-up on vega10
drm/amd/display: fix cursor related Pstate hang
drm/amd/display: Set irq state only on existing crtcs
drm/amd/display: Fixed non-native modes not lighting up
drm/amd/display: Call update_stream_signal directly from amdgpu_dm
drm/amd/display: Make create_stream_for_sink more consistent
drm/amd/display: Don't block dual-link DVI modes
drm/amd/display: Don't allow dual-link DVI on all ASICs.
drm/amd/display: Pass signal directly to enable_tmds_output
drm/amd/display: Remove unnecessary fail labels in create_stream_for_sink
drm/amd/display: Move MAX_TMDS_CLOCK define to header
...
sun4i fixes on clk, division by zero and LVDS.
* tag 'drm-misc-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-misc:
drm/sun4i: crtc: Call drm_crtc_vblank_on / drm_crtc_vblank_off
drm/sun4i: rgb: Fix potential division by zero
drm/sun4i: tcon: Reduce the scope of the LVDS error a bit
drm/sun4i: Release exclusive clock lock when disabling TCON
drm/sun4i: Fix dclk_set_phase
The boost frequency is only applied from the RPS worker while someone is
waiting on a request and requested a boost. As such, when the user
wishes to change the frequency, we have to kick the worker in order to
re-evaluate whether to apply the boost frequency.
v2: Check num_waiters to decide if we should kick the worker to handle
boosting.
Fixes: 29ecd78d3b ("drm/i915: Define a separate variable and control for RPS waitboost frequency")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180308142648.4016-1-chris@chris-wilson.co.uk
