Currently all interrupts generated by cxl are named "cxl". This is not very
informative as we can't distinguish between cards, AFUs, error interrupts, user
contexts and user interrupts numbers. Being able to distinguish them is useful
for setting affinity.
This patch gives each of these names in /proc/interrupts.
A two card CAPI system, with afu0.0 having 2 active contexts each with 4 user
IRQs each, will now look like this:
% grep cxl /proc/interrupts
444: 0 OPAL ICS 141312 Level cxl-card1-err
445: 0 OPAL ICS 141313 Level cxl-afu1.0-err
446: 0 OPAL ICS 141314 Level cxl-afu1.0
462: 0 OPAL ICS 2052 Level cxl-afu0.0-pe0-1
463: 75517 OPAL ICS 2053 Level cxl-afu0.0-pe0-2
468: 0 OPAL ICS 2054 Level cxl-afu0.0-pe0-3
469: 0 OPAL ICS 2055 Level cxl-afu0.0-pe0-4
470: 0 OPAL ICS 2056 Level cxl-afu0.0-pe1-1
471: 75506 OPAL ICS 2057 Level cxl-afu0.0-pe1-2
472: 0 OPAL ICS 2058 Level cxl-afu0.0-pe1-3
473: 0 OPAL ICS 2059 Level cxl-afu0.0-pe1-4
502: 1066 OPAL ICS 2050 Level cxl-afu0.0
514: 0 OPAL ICS 2048 Level cxl-card0-err
515: 0 OPAL ICS 2049 Level cxl-afu0.0-err
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an AFU has a hardware bug that causes it to acknowledge a context
terminate or remove while that context has outstanding transactions, it
is possible for the kernel to receive an interrupt for that context
after we have removed it from the context list.
The kernel will not be able to demultiplex the interrupt (or worse - if
we have already reallocated the process handle we could mis-attribute it
to the new context), and printed a big scary warning.
It did not acknowledge the interrupt, which would effectively halt
further translation fault processing on the PSL.
This patch makes the warning clearer about the likely cause of the issue
(i.e. hardware bug) to make it obvious to future AFU designers of what
needs to be fixed. It also prints out the process handle which can then
be matched up with hardware and software traces for debugging.
It also acknowledges the interrupt to the PSL with either an address
error or acknowledge, so that the PSL can continue with other
translations.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixes following minor issues in code comments in coresight.h
- typo %s/enpoint/endpoint
- alignment of comment section for struct coresight_desc
- correction of comment for struct coresight_connection and
struct coresight_device.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coresight IP blocks allow for the support of HW assisted tracing
on ARM SoCs. Bindings for the currently available blocks are
presented herein.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1/ change request_module call to zero-pad single digit
family numbers. This appears to be the intention of
the code, but not what it actually does.
This means that the alias created for W1_FAMILY_SMEM_01
might actually be useful.
2/ Define a family name for the BQ27000 battery charge monitor.
Unfortunately this is the same number as W1_FAMILY_SMEM_01
so if both a compiled on a system, one module might need to
be blacklisted.
3/ Add a MODULE_ALIAS for the bq27000.
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct cn_msg len field comes from userspace and needs to be
validated. More logical to do so here where the cn_msg pointer is
pulled out of the sk_buff than the callback which is passed cn_msg *
and might assume no validation is needed.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David Fries <David@Fries.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The interface is for applications that monitor
the fw health.
We use device_create_with_groups interface
to register attribute with the mei class device
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ME devices prior to PCH8 (Lynx Point) have two FW status registers,
on PCH8 and newer excluding txe there are six FW status registers.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kill host_hw_status and me_hw_state from me hw structure that used
to cache host and me csr values.
We do not use the cached values across the function calls anymore
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 783c8f4c84 ("soc/tegra: Add efuse driver for Tegra") added a
fuse directory in drivers/misc along with a Makefile that were never
used. They were leftovers from an earlier version of the patch series.
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
one fix for PX laptops.
* 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails
Under high memory pressure and very high KVP R/W test pressure, the netlink
recvfrom() may transiently return ENOBUFS to the daemon -- we found this
during a 2-week stress test.
We'd better not terminate the daemon on the failure, because a typical KVP
user will re-try the R/W and hopefully it will succeed next time.
We can also ignore the errors on sending.
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of making a list of exceptions for readonly filesystems
in addition to iso9660 we already have it is better to skip freeze
operation for all readonly-mounted filesystems.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When ioctl(fd, FIFREEZE, 0) results in an error we cannot report it
to syslog instantly since that can cause write to a frozen disk.
However, the name of the filesystem which caused the error and errno
are valuable and we would like to get a nice human-readable message
in the log. Save errno before calling vss_operate(VSS_OP_THAW) and
report the error right after.
Unfortunately, FITHAW errors cannot be reported the same way as we
need to finish thawing all filesystems before calling syslog().
We should also avoid calling endmntent() for the second time in
case we encountered an error during freezing of '/' as it usually
results in SEGSEGV.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we fail to send a message to userspace daemon with cn_netlink_send()
there is no need to wait for userspace to reply as it is not going to
happen. This happens when kvp or vss daemon is stopped after a successful
handshake. Report HV_E_FAIL immediately and cancel the timeout job so
host won't receive two failures.
Use pr_warn() for VSS and pr_debug() for KVP deliberately as VSS request
are rare and result in a failed backup. KVP requests are much more frequent
after a successful handshake so avoid flooding logs. It would be nice to
have an ability to de-negotiate with the host in case userspace daemon gets
disconnected so we won't receive new requests. But I'm not sure it is
possible.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In contrast with KVP there is no timeout when communicating with
userspace VSS daemon. In case it gets stuck performing freeze/thaw
operation no message will be sent to the host so it will take very
long (around 10 minutes) before backup fails. Introduce 10 second
timeout using schedule_delayed_work().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
acpi_parse_entries() allows to traverse all available table entries (aka
subtables) by passing max_entries parameter equal to 0, but since its count
variable is only incremented if max_entries is not 0, the function always
returns 0 for max_entries equal to 0. It would be more useful if it returned
the number of entries matched instead, so make it increment count in that
case too.
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_table_parse() function has a callback that
passes a pointer to a table_header. Add a new function
which takes this pointer and parses its entries. This
eliminates the need to re-traverse all the tables for
each call. e.g. as in acpi_table_parse_madt() which is
normally called after acpi_table_parse().
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The subdevice 'len_chanlist' is only used by subdevices that support async
commands. Remove the unnecessary initializations in this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tidy up the code that determines the initial io_bits (direction) of the
digital I/O subdevice and remove the magic numbers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the comedi_subdevice 'readback' member and the core provided (*insn_read)
to handle the readback of the write-only analog output subdevice. Remove the
then unused 'ao_data' member from the private data.
The private data is now unnecessary. Remove it and the allocation.
For aesthetics, rename the (*insn_write) function and tidy it up a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function is only called by the (*auto_attach) to reset all the analog
output channels. For aesthetics, absorb the function.
Fix the range programming for each channel. According to the users manual
the "range strobe" register needs to be written after setting the "DAC range
control" register in order to load the range setting.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pci1723_reset() function simply resets all the analog output channels
to 0V and a +/-10V range. This really isn't necessary when detaching the
driver.
Remove the board reset and just use comedi_pci_detach() directly for the
(*detach).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This member of the private data is initialized to 0 by pci1723_reset()
and is not used any where else in the driver. Remove it.
Use the register map defines to set the range for each output channel.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, rename the defines used for the register map offsets and
remove the unnecessary comments. Add the bit defines for the registers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the comedi_timeout() helper to wait for the eeprom to be ready to accept
writes and remove the timeout loop in labpc_eeprom_write().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the comedi_subdevice 'readback' member and the core provided (*insn_read)
to handle the readback of the eeprom subdevice. Remove the then unused
'eeprom_data' member from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the comedi_subdevice 'readback' member and the core provided (*insn_read)
to handle the readback of the analog output subdevice. Remove the then unused
'ao_value' member from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the comedi_subdevice 'readback' member and the core provided (*insn_read)
to handle the readback of the write-only caldac subdevice. Remove the then unused
'caldac' member from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the comedi_subdevice 'readback' member and the core provided (*insn_read)
to handle the readback of the write-only caldac subdevice. Remove the then unused
'caldac' member from the private data.
Tidy up atao_calib_insn_write().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the comedi_subdevice 'readback' member and the core provided (*insn_read)
to handle the readback of the write-only dac08 calib subdevice. Remove the
then unused 'dac08_value' member from the private data.
The dac08 calib subdevice only has one channel. For consistency in the driver,
modify the subdevice init so that a loop is used to initialize the channels and
readback values.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For consistency with the other calib subdevices, refactor this (*insn_write)
function so that it only writes the final data value to the hardware.,
For aesthetics, rename the function so it has namespace associated with the
driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the comedi_subdevice 'readback' member and the core provided (*insn_read)
to handle the readback of the write-only trimpot calib subdevice. Remove the
then unused 'trimpot_value' member from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi core expects the (*insn_write) functions to write 'insn->n'
values to the hardware and return the number of values written. Currently
this function only writes the first value. For this subdevice it only makes
sense to write the final data value.
Fix the function to work like the core expects. For aesthetics, rename the
function so it has namespace associated with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the comedi_subdevice 'readback' member and the core provided (*insn_read)
to handle the readback of the write-only caldac subdevice. Remove the then
unused 'caldac_value' member from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
