Remove the following defines:
_drv_always_
_drv_emerg_
_drv_alert_
_drv_crit_
_drv_err_
_drv_warning_
_drv_notice_
_drv_info_
_drv_debug_
from include/rtw_debug.h, as they are no longer used anywhere in the
driver, and are unlikely to be ever again with the removal of the old
debugging/logging code.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220516224640.90973-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The process_addba_req function is called only by OnAction_back. Merge the
two functions.
OnAction_back has already checked that psta != NULL, we can drop the check
in process_addba_req before merging the functions. We can also simplify
the parsing of the tid by using struct ieee80211.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220514164740.282552-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Read the back action code from struct ieee80211_mgmt.
struct ieee80211_mgmt contains an "action" union. Each of its members
starts with an 8-bit action code. Treat the union as addba_req when we
read the action code although we do not yet know if it is an addba_req.
This approach is similar to ieee80211_iface_process_skb.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220508161451.115847-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees writes:
lkdtm updates for -next
- Test for new usercopy memory regions
- avoid GCC 12 warnings
- update expected CONFIGs for selftests
* tag 'lkdtm-next' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/heap: Hide allocation size from -Warray-bounds
selftests/lkdtm: Add configs for stackleak and "after free" tests
lkdtm/usercopy: Check vmalloc and >0-order folios
lkdtm/usercopy: Rename "heap" to "slab"
lkdtm: cfi: Fix type width for masking PAC bits
Moritz writes:
FPGA Manager changes for 5.19-rc1
FPGA Manager
- My change moves the linux-fpga repository to a shared
location w/ shared responsibilities between maintainers
- Nava's changes fix coding style and kernel-docs
DFL
- Matthew's change allows ports to be linked to FMEs.
- Tianfei's changes clean up some documentation and
ensure the feature type is checked before parsing IRQs
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: dfl: Allow Port to be linked to FME's DFL
Documentation: fpga: dfl: add link address of feature id table
fpga: dfl: check feature type before parse irq info
fpga: fpga-region: fix kernel-doc formatting issues
fpga: Use tab instead of space indentation
fpga: fpga-mgr: fix kernel-doc warnings
fpga: fix for coding style issues
MAINTAINERS: Update linux-fpga repository location
Chanwoo writes:
Update extcon next for v5.19
Detailed description for this pull request:
1. update extcon core driver
- extcon_get_extcon_dev() has been almost used to get the extcon device
on booting time. If extcon provider driver is probed at late time,
the extcon consumer driver get the -EPROBE_DEFER return value.
It requires the inefficient handling code of -EPROBE_DEFER.
Instead, extcon_get_extcon_dev() will return -EPROBE_DEFER
if the required extcon device is none. It makes the extcon consumer driver
to be simplified when getting extcon device.
- Register device after dev_set_drvdata because of accessing
the sysfs attributes at timing of between drv_set_data and device_register.
- Fix some kernel-doc comments of extcon functions.
2. update extcon provider driver
- Update extcon-intel-int3496.c
: Add support for controlling vbus power via regulator and support
to the extcon-intel-int3496.c driver to bind to devices without
an ACPi companion. And fix the minor clean-up.
- Use struct_size() helper on extcon-usbc-cros-ec.c
- Remove the disable irq operation in system sleep for using vbus/id
gpio as the wakeup source on extcon-usb-gpio.c
- Add support of SM5703 device by using existing extcon-sm5502.c
and rename i2c_devic_id from sm5703 to sm5703-muic to reduce confusion
between SM5703 MFD device and extcon device.
- Add usb role class support and add queue work sync before driver release
on extcon-ptn5150.c
* tag 'extcon-next-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: Modify extcon device to be created after driver data is set
extcon: sm5502: Clarify SM5703's i2c device ID
extcon: ptn5150: Add usb role class support
extcon: ptn5150: Add queue work sync before driver release
extcon: sm5502: Add support for SM5703
dt-bindings: extcon: bindings for SM5703
extcon: usb-gpio: Remove disable irq operation in system sleep
extcon: Fix some kernel-doc comments
extcon: usbc-cros-ec: Use struct_size() helper in kzalloc()
extcon: int3496: Add support for controlling Vbus through a regulator
extcon: int3496: Add support for binding to plain platform devices
extcon: int3496: Request non-exclusive access to the ID GPIO
extcon: int3496: Make the driver a bit less verbose
extcon: Fix extcon_get_extcon_dev() error handling
Vinod writes:
soundwire updates for 5.19-rc1
- Support for v1.6.0 Qualcomm controllers
- Bunch of pm updates by Intel for peripheral attachment and system pm
etc
* tag 'soundwire-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: qcom: adjust autoenumeration timeout
soundwire: qcom: use pm_runtime_resume_and_get()
soundwire: intel: use pm_runtime_resume_and_get()
soundwire: cadence: use pm_runtime_resume_and_get()
soundwire: bus: use pm_runtime_resume_and_get()
soundwire: qcom: return error when pm_runtime_get_sync fails
soundwire: bus: pm_runtime_request_resume on peripheral attachment
soundwire: intel: disable WAKEEN in pm_runtime resume
soundwire: intel: prevent pm_runtime resume prior to system suspend
soundwire: cadence: recheck device0 attachment after status change
dt-bindings: soundwire: qcom: Add bindings for audio clock reset control property
soundwire: qcom: Add compatible name for v1.6.0
soundwire: stream: Fix error return code in do_bank_switch()
soundwire: qcom: fix an error message in swrm_wait_for_frame_gen_enabled()
Manivannan writes:
MHI changes for v5.19
MHI Host
--------
Support for new modems:
- Foxconn Cinterion MV32-WA/MV32-WB based on SDX62/SDX65
- Telit FN980 v1 based on SDX55
- Telit FN990 based on SDX65
- Foxconn T99W373/T99W368 based on SDX62/SDX65
Core changes:
- During the recycle of event ring elements, compute the ctxt_wp based on the
local cached value instead of reading from shared memory. This is to prevent
the possible corruption of the ctxt_wp as some of the endpoint devices could
modify the value in shared memory.
- Add sysfs support for resetting the endpoint based on the MHI spec. The MHI
spec allows the host to hard reset the device in the case of an unrecoverable
error and all other reset mechanisms have failed.
- During MHI shutdown, wait for the endpoint device to enter the ready state
post reset before proceeding. This is to avoid a possible race where host
would remove the interrupt handler and device will send ready state
interrupt, resulting in IOMMU fault.
- Bail out updating the MHI register if the read has failed during
read/modify/write.
- Use mhi_write_reg() instead of mhi_write_reg_field() for writing the whole
register fields in mhi_init_mmio().
MAINTAINERS change:
- Since Qualcomm has moved the email domain for its employess from codeaurora
domain to quicinc, update the same for Hemant.
* tag 'mhi-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: (29 commits)
bus: mhi: host: Add support for Foxconn T99W373 and T99W368
bus: mhi: host: pci_generic: add Telit FN990
bus: mhi: host: pci_generic: add Telit FN980 v1 hardware revision
bus: mhi: host: Add support for Cinterion MV32-WA/MV32-WB
bus: mhi: host: Optimize and update MMIO register write method
bus: mhi: host: Bail on writing register fields if read fails
bus: mhi: host: Wait for ready state after reset
bus: mhi: host: Add soc_reset sysfs
bus: mhi: host: pci_generic: Sort mhi_pci_id_table based on the PID
bus: mhi: host: Use cached values for calculating the shared write pointer
MAINTAINERS: Update Hemant's email id
bus: mhi: ep: Add uevent support for module autoloading
bus: mhi: ep: Add support for suspending and resuming channels
bus: mhi: ep: Add support for queueing SKBs to the host
bus: mhi: ep: Add support for processing channel rings
bus: mhi: ep: Add support for reading from the host
bus: mhi: ep: Add support for processing command rings
bus: mhi: ep: Add support for handling SYS_ERR condition
bus: mhi: ep: Add support for handling MHI_RESET
bus: mhi: ep: Add support for powering down the MHI endpoint stack
...
There are currently two separate batched entropy implementations, for
u32 and u64, with nearly identical code, with the goal of avoiding
unaligned memory accesses and letting the buffers be used more
efficiently. Having to maintain these two functions independently is a
bit of a hassle though, considering that they always need to be kept in
sync.
This commit factors them out into a type-generic macro, so that the
expansion produces the same code as before, such that diffing the
assembly shows no differences. This will also make it easier in the
future to add u16 and u8 batches.
This was initially tested using an always_inline function and letting
gcc constant fold the type size in, but the code gen was less efficient,
and in general it was more verbose and harder to follow. So this patch
goes with the boring macro solution, similar to what's already done for
the _wait functions in random.h.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
randomize_page is an mm function. It is documented like one. It contains
the history of one. It has the naming convention of one. It looks
just like another very similar function in mm, randomize_stack_top().
And it has always been maintained and updated by mm people. There is no
need for it to be in random.c. In the "which shape does not look like
the other ones" test, pointing to randomize_page() is correct.
So move randomize_page() into mm/util.c, right next to the similar
randomize_stack_top() function.
This commit contains no actual code changes.
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The register_random_ready_notifier() notifier is somewhat complicated,
and was already recently rewritten to use notifier blocks. It is only
used now by one consumer in the kernel, vsprintf.c, for which the async
mechanism is really overly complex for what it actually needs. This
commit removes register_random_ready_notifier() and unregister_random_
ready_notifier(), because it just adds complication with little utility,
and changes vsprintf.c to just check on `!rng_is_initialized() &&
!rng_has_arch_random()`, which will eventually be true. Performance-
wise, that code was already using a static branch, so there's basically
no overhead at all to this change.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Petr Mladek <pmladek@suse.com> # for vsprintf.c
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The RNG incorporates RDRAND into its state at boot and every time it
reseeds, so there's no reason for callers to use it directly. The
hashing that the RNG does on it is preferable to using the bytes raw.
The only current use case of get_random_bytes_arch() is vsprintf's
siphash key for pointer hashing, which uses it to initialize the pointer
secret earlier than usual if RDRAND is available. In order to replace
this narrow use case, just expose whether RDRAND is mixed into the RNG,
with a new function called rng_has_arch_random(). With that taken care
of, there are no users of get_random_bytes_arch() left, so it can be
removed.
Later, if trust_cpu gets turned on by default (as most distros are
doing), this one use of rng_has_arch_random() can probably go away as
well.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Petr Mladek <pmladek@suse.com> # for vsprintf.c
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Much of random.c is devoted to initializing the rng and accounting for
when a sufficient amount of entropy has been added. In a perfect world,
this would all happen during init, and so we could mark these functions
as __init. But in reality, this isn't the case: sometimes the rng only
finishes initializing some seconds after system init is finished.
For this reason, at the moment, a whole host of functions that are only
used relatively close to system init and then never again are intermixed
with functions that are used in hot code all the time. This creates more
cache misses than necessary.
In order to pack the hot code closer together, this commit moves the
initialization functions that can't be marked as __init into
.text.unlikely by way of the __cold attribute.
Of particular note is moving credit_init_bits() into a macro wrapper
that inlines the crng_ready() static branch check. This avoids a
function call to a nop+ret, and most notably prevents extra entropy
arithmetic from being computed in mix_interrupt_randomness().
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The current code was a mix of "nbytes", "count", "size", "buffer", "in",
and so forth. Instead, let's clean this up by naming input parameters
"buf" (or "ubuf") and "len", so that you always understand that you're
reading this variety of function argument.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
