Only CS7 and CS8 are supported but CSIZE is not sanitized after
fallthrough from CS5 or CS6 to CS7.
Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().
Fixes: c10b13325c (tty: serial: Add RDA8810PL UART driver)
Cc: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only CS7 and CS8 seem supported but CSIZE is not sanitized to CS8 in
the default: block.
Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().
Fixes: 5930cb3511 (serial: driver for Conexant Digicolor USART)
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/tty/serial/cpm_uart/cpm_uart_core.c: In function ‘cpm_uart_init_port’:
drivers/tty/serial/cpm_uart/cpm_uart_core.c:1251:7: error: ‘udbg_port’ undeclared (first use in this function); did you mean ‘uart_port’?
if (!udbg_port)
^~~~~~~~~
uart_port
commit d142585bce leave this corner, wrap it with #ifdef block
Fixes: d142585bce ("serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220518135452.39480-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For the case of console_suspend disabled, if back to back suspend/resume
test is executed, at the end of test, sometimes console would appear to
be frozen not responding to input. This would happen because, during
resume, rx transactions can come in before system is ready, malfunction
of rx happens in turn resulting in console appearing to be stuck.
Do a stop_rx in suspend sequence to prevent this.
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Link: https://lore.kernel.org/r/1652692810-31148-1-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the UART frequency table 'root_freq[]' with logic around
clk_round_rate() so that SoC details like the available clk frequencies
can change and this driver still works. This reduces tight coupling
between this UART driver and the SoC clk driver because we no longer
have to update the 'root_freq[]' array for new SoCs. Instead the driver
determines the available frequencies at runtime.
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Link: https://lore.kernel.org/r/1652697510-30543-1-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SER_RS485_RTS_ON_SEND and SER_RS485_RTS_AFTER_SEND relate to behavior
within RS485 operation. The driver checks if they have the same value
which is not possible to realize with the hardware. The check is taken
regardless of SER_RS485_ENABLED flag and -EINVAL is returned when the
check fails, which creates problems.
This check makes it unnecessarily complicated to turn RS485 mode off as
simple zeroed serial_rs485 struct will trigger that equal values check.
In addition, the driver itself memsets its rs485 structure to zero when
RS485 is disabled but if userspace would try to make an TIOCSRS485
ioctl() call with the very same struct, it would end up failing with
-EINVAL which doesn't make much sense.
Resolve the problem by moving the check inside SER_RS485_ENABLED block.
Fixes: 7ecc77011c ("serial: 8250_fintek: Return -EINVAL on invalid configuration")
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/035c738-8ea5-8b17-b1d7-84a7b3aeaa51@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The uart_ops startup() callback is called without interrupts
disabled and without port->lock locked, relatively late during the
boot process (from the call path of console_on_rootfs()). If the
device is a console, it was already previously registered and could
be actively printing messages.
Since the startup() callback is reading/writing registers used by
the console write() callback (AML_UART_CONTROL), its access must
be synchronized using the port->lock. Currently it is not.
The startup() callback is the only function that explicitly enables
interrupts. Without the synchronization, it is possible that
interrupts become accidentally permanently disabled.
CPU0 CPU1
meson_serial_console_write meson_uart_startup
-------------------------- ------------------
spin_lock(port->lock)
val = readl(AML_UART_CONTROL)
uart_console_write()
writel(INT_EN, AML_UART_CONTROL)
writel(val, AML_UART_CONTROL)
spin_unlock(port->lock)
Add port->lock synchronization to meson_uart_startup() to avoid
racing with meson_serial_console_write().
Also add detailed comments to meson_uart_reset() explaining why it
is *not* using port->lock synchronization.
Link: https://lore.kernel.org/lkml/2a82eae7-a256-f70c-fd82-4e510750906e@samsung.com
Fixes: ff7693d079 ("ARM: meson: serial: add MesonX SoC on-chip uart driver")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20220508103547.626355-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up: There is one caller. The @cpu argument can be made
implicit now that a get_cpu/put_cpu pair is no longer needed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_xprt_enqueue() disables preemption via get_cpu() and then asks
for a pool of a specific CPU (current) via svc_pool_for_cpu().
While preemption is disabled, svc_xprt_enqueue() acquires
svc_pool::sp_lock with bottom-halfs disabled, which can sleep on
PREEMPT_RT.
Disabling preemption is not required here. The pool is protected with a
lock so the following list access is safe even cross-CPU. The following
iteration through svc_pool::sp_all_threads is under RCU-readlock and
remaining operations within the loop are atomic and do not rely on
disabled-preemption.
Use raw_smp_processor_id() as the argument for the requested CPU in
svc_pool_for_cpu().
Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This patch allows expired client with lock state to be in COURTESY
state. Lock conflict with COURTESY client is resolved by the fs/lock
code using the lm_lock_expirable and lm_expire_lock callback in the
struct lock_manager_operations.
If conflict client is in COURTESY state, set it to EXPIRABLE and
schedule the laundromat to run immediately to expire the client. The
callback lm_expire_lock waits for the laundromat to flush its work
queue before returning to caller.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add 2 new callbacks, lm_lock_expirable and lm_expire_lock, to
lock_manager_operations to allow the lock manager to take appropriate
action to resolve the lock conflict if possible.
A new field, lm_mod_owner, is also added to lock_manager_operations.
The lm_mod_owner is used by the fs/lock code to make sure the lock
manager module such as nfsd, is not freed while lock conflict is being
resolved.
lm_lock_expirable checks and returns true to indicate that the lock
conflict can be resolved else return false. This callback must be
called with the flc_lock held so it can not block.
lm_expire_lock is called to resolve the lock conflict if the returned
value from lm_lock_expirable is true. This callback is called without
the flc_lock held since it's allowed to block. Upon returning from
this callback, the lock conflict should be resolved and the caller is
expected to restart the conflict check from the beginnning of the list.
Lock manager, such as NFSv4 courteous server, uses this callback to
resolve conflict by destroying lock owner, or the NFSv4 courtesy client
(client that has expired but allowed to maintains its states) that owns
the lock.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
This patch moves create/destroy of laundry_wq from nfs4_state_start
and nfs4_state_shutdown_net to init_nfsd and exit_nfsd to prevent
the laundromat from being freed while a thread is processing a
conflicting lock.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This patch allows expired client with open state to be in COURTESY
state. Share/access conflict with COURTESY client is resolved by
setting COURTESY client to EXPIRABLE state, schedule laundromat
to run and returning nfserr_jukebox to the request client.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This patch provides courteous server support for delegation only.
Only expired client with delegation but no conflict and no open
or lock state is allowed to be in COURTESY state.
Delegation conflict with COURTESY/EXPIRABLE client is resolved by
setting it to EXPIRABLE, queue work for the laundromat and return
delay to the caller. Conflict is resolved when the laudromat runs
and expires the EXIRABLE client while the NFS client retries the
OPEN request. Local thread request that gets conflict is doing the
retry in _break_lease.
Client in COURTESY or EXPIRABLE state is allowed to reconnect and
continues to have access to its state. Access to the nfs4_client by
the reconnecting thread and the laundromat is serialized via the
client_lock.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The second parameter of wait_for_completion_interruptible_timeout()
is a jiffies value whose type is "unsigned long". Avoid an
unnecessary and potentially fraught implicit type conversion at the
wait_for_completion_interruptible_timeout() call site in
cache_wait_req().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cache deferral injection stress-tests the cache deferral logic as
well as upper layer protocol deferred request handlers. This
facility is for developers and professional testers to ensure
coverage of the rqst deferral code paths. To date, we haven't
had an adequate way to ensure these code paths are covered
during testing, short of temporary code changes to force their
use.
A file called /sys/kernel/debug/fail_sunrpc/ignore-cache-wait
enables administrators to disable cache deferral injection while
allowing other types of sunrpc errors to be injected. The default
setting is that cache deferral injection is enabled (ignore=false).
To enable support for cache deferral injection,
CONFIG_FAULT_INJECTION, CONFIG_FAULT_INJECTION_DEBUG_FS, and
CONFIG_SUNRPC_DEBUG must all be set to "Y".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Replace the temporary fix from commit 4d5004451a ("SUNRPC: Fix the
svc_deferred_event trace class") with the use of __sockaddr and
friends, which is the preferred solution (but only available in 5.18
and newer).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd_splice_actor() checks that the page being spliced does not
match the previous element in the svc_rqst::rq_pages array. We
believe this is to prevent a double put_page() in cases where the
READ payload is partially contained in the xdr_buf's head buffer.
However, the NFSD READ proc functions no longer place any part of
the READ payload in the head buffer, in order to properly support
NFS/RDMA READ with Write chunks. Therefore, simplify the logic in
nfsd_splice_actor() to remove this unnecessary check.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The module param debug for n_gsm uses KERN_INFO level, but the hexdump
now uses KERN_DEBUG level. This started after commit 091cb0994e
("lib/hexdump: make print_hex_dump_bytes() a nop on !DEBUG builds").
We now use dynamic_hex_dump() unless DEBUG is set.
This causes no packets to be seen with modprobe n_gsm debug=0x1f unlike
earlier. Let's fix this by adding gsm_hex_dump_bytes() that calls
print_hex_dump() with KERN_INFO to match what n_gsm is doing with the
other debug related output.
Fixes: 091cb0994e ("lib/hexdump: make print_hex_dump_bytes() a nop on !DEBUG builds")
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220512131506.1216-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When dwc3_gadget_ep_cleanup_completed_requests() called to
dwc3_gadget_giveback() where the dwc3 lock is released, other thread is
able to execute. In this situation, usb_ep_disable() gets the chance to
clear endpoint descriptor pointer which leds to the null pointer
dereference problem. So needs to move the null pointer check to a proper
place.
Example call stack:
Thread#1:
dwc3_thread_interrupt()
spin_lock
-> dwc3_process_event_buf()
-> dwc3_process_event_entry()
-> dwc3_endpoint_interrupt()
-> dwc3_gadget_endpoint_trbs_complete()
-> dwc3_gadget_ep_cleanup_completed_requests()
...
-> dwc3_giveback()
spin_unlock
Thread#2 executes
Thread#2:
configfs_composite_disconnect()
-> __composite_disconnect()
-> ffs_func_disable()
-> ffs_func_set_alt()
-> ffs_func_eps_disable()
-> usb_ep_disable()
wait for dwc3 spin_lock
Thread#1 released lock
clear endpoint.desc
Fixes: 2628844812 ("usb: dwc3: gadget: Fix null pointer exception")
Cc: stable <stable@kernel.org>
Signed-off-by: Albert Wang <albertccwang@google.com>
Link: https://lore.kernel.org/r/20220518061315.3359198-1-albertccwang@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
