The install target should not depend on any build artifact.
The reason is explained in commit 19514fc665 ("arm, kbuild: make
"make install" not depend on vmlinux").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
I think this hack is a bad idea. arch/powerpc/boot/Makefile is the
only and last user. Let's stop doing this.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
There is no good reason to define struct namespace_list in modpost.h
struct module has pointers to struct namespace_list, but that does
not require the definition of struct namespace_list.
Move it to modpost.c.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Do not repeat the similar code.
It is simpler to do this in check_exports() instead of add_versions().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
It took me a while to understand the intent of "exp->module == mod".
This code goes back to 2003. [1]
The commit is not in this git repository, and might be worth a little
explanation.
You can add EXPORT_SYMBOL() without having its definition in the same
file (but you need to put a declaration).
This is typical when EXPORT_SYMBOL() is added in a C file, but the
actual implementation is in a separate assembly file.
One example is arch/arm/kernel/armksyms.c
In the old days, EXPORT_SYMBOL() was only available in C files (but
this limitation does not exist any more). If you forget to add the
definition, this error occurs.
Add a separate, clearer message for this case. It should be an error
even if KBUILD_MODPOST_WARN is given.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=2763b6bcb96e6a38a2fe31108fe5759ec5bcc80a
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The description,
it may have already been added without a
CRC, in this case just update the CRC
... is no longer valid.
In the old days, this function was used to update the CRC as well.
Commit 040fcc819a ("kbuild: improved modversioning support for
external modules") started to use a separate function (sym_update_crc)
for updating the CRC.
The first part, "Add an exported symbol" is correct, but it is too
obvious from the function name. Drop this comment entirely.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
If an error occurs, modpost will fail anyway. Do not write out
any content (, which might be invalid).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Use snprintf() to avoid the potential buffer overflow, and also
check the return value to detect the too long path.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The macros defined in this file are for testing only and are purposely
not used. When compiled with W=2, both gcc and clang yield some
-Wunused-macros warnings. Ignore them.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
CONFIG_PAHOLE_VERSION is a part of a config since the commit below. And
when multiple people update the config, this value constantly changes.
Even if they use dummy scripts.
To fix this, add a pahole dummy script returning v99.99. (This is
translated into 9999 later in the process.)
Thereafter, this script can be invoked easily for example as:
make PAHOLE=scripts/dummy-tools/pahole oldconfig
Fixes: 613fe16923 (kbuild: Add CONFIG_PAHOLE_VERSION)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
For out-of-tree builds, this script invokes cpio twice to copy header
files from the srctree and subsequently from the objtree. According to a
comment in the script, there might be situations in which certain files
already exist in the destination directory when header files are copied
from the objtree:
"The second CPIO can complain if files already exist which can happen
with out of tree builds having stale headers in srctree. Just silence
CPIO for now."
GNU cpio might simply print a warning like "newer or same age version
exists", but toybox cpio exits with a non-zero exit code unless the
command line option "-u" is specified.
To improve compatibility with toybox cpio, add the command line option
"-u" to unconditionally replace existing files in the destination
directory.
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When developing new code/feature, CONFIG_WERROR is most
often turned off, especially for people using make W=12 to
get more warnings.
In such case, turning on -Werror temporarily would require
switching on CONFIG_WERROR in the configuration, building,
then switching off CONFIG_WERROR.
For this use case, this patch introduces a new 'e' modifier
to W= as a short hand for KCFLAGS+=-Werror" so that -Werror
got added to the kernel (built-in) and modules' CFLAGS.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
ld and ar support @file, which command-line options are read from.
Now that *.mod lists the member objects in the correct order, without
duplication, it is ready to be passed to ld and ar.
By using the @file syntax, people will not be worried about the pitfall
described in the NOTE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The dependency
$(obj)/%.mod: $(obj)/%$(mod-prelink-ext).o
... exists because *.mod files previously contained undefined symbols,
which are computed from *.o files when CONFIG_TRIM_UNUSED_KSYMS=y.
Now that the undefined symbols are put into separate *.usyms files,
there is no reason to make *.mod depend on *.o files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
It is allowed to add the same objects multiple times to obj-y / obj-m:
obj-y += foo.o foo.o foo.o
obj-m += bar.o bar.o bar.o
It is also allowed to add the same objects multiple times to a composite
module:
obj-m += foo.o
foo-y := foo1.o foo2.o foo2.o foo1.o
This flexibility is useful because the same object might be selected by
different CONFIG options, like this:
obj-m += foo.o
foo-y := foo1.o
foo-$(CONFIG_FOO_X) += foo2.o
foo-$(CONFIG_FOO_Y) += foo2.o
The duplicated objects are omitted at link time. It works naturally in
Makefiles because GNU Make removes duplication in $^ without changing
the order.
It is working well, almost...
A small flaw I notice is, *.mod contains duplication in such a case.
This is probably not a big deal. As far as I know, the only small
problem is scripts/mod/sumversion.c parses the same file multiple
times.
I am fixing this because I plan to reuse *.mod for other purposes,
where the duplication can be problematic.
The code change is quite simple. We already use awk to drop duplicated
lines in modules.order (see cmd_modules_order in the same file).
I copied the code, but changed RS to use spaces as record separators.
I also changed the file format to list one object per line.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The *.mod files have two lines; the first line lists the member objects
of the module, and the second line, if CONFIG_TRIM_UNUSED_KSYMS=y, lists
the undefined symbols.
Currently, we generate *.mod after constructing composite modules,
otherwise, we cannot compute the second line. No prerequisite is
required to print the first line.
They are orthogonal. Splitting them into separate commands will ease
further cleanups.
This commit splits the list of undefined symbols out to *.usyms files.
Previously, the list of undefined symbols ended up with a very long
line, but now it has one symbol per line.
Use sed like we did before commit 7d32358be8 ("kbuild: avoid split
lines in .mod files").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The first command in cmd_mod is similar to the real-search macro.
Reuse it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Precisely speaking, when you get the stem of the path, you should use
$(patsubst $(obj)/%,%,...) instead of $(notdir ...).
I do not see this usecase, but if you create a composite object in a
subdirectory, the Makefile should look like this:
obj-$(CONFIG_FOO) += dir/foo.o
dir/foo-objs := dir/foo1.o dir/foo2.o
The member objects should be assigned to dir/foo-objs instead of
foo-objs.
This syntax is more consistent with commit 54b8ae66ae ("kbuild:
change *FLAGS_<basetarget>.o to take the path relative to $(obj)").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The complicated part of multi_depend is the same as suffix-search.
Reuse it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Split the code into two macros, cmd_gen_symversions_S for running
genksyms, and cmd_modversions for running $(LD) to update the object
with CRCs.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
cmd_modversions_c implements two parts; run genksyms to calculate CRCs
of exported symbols, run $(LD) to update the object with the CRCs. The
latter is not executed for CONFIG_LTO_CLANG=y since the object is not
ELF but LLVM bit code at this point.
The first part can be unified because we can always use $(NM) instead
of "$(OBJDUMP) -h" to dump the symbols.
Split the code into the two macros, cmd_gen_symversions_c and
cmd_modversions.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
There are two call sites for sym_update_namespace().
When the symbol has no namespace, s->namespace is set to NULL,
but the conversion from "" to NULL is done in two different places.
[1] read_symbols()
This gets the namespace from __kstrtabns_<symbol>. If the symbol has
no namespace, sym_get_data(info, sym) returns the empty string "".
namespace_from_kstrtabns() converts it to NULL before it is passed to
sym_update_namespace().
[2] read_dump()
This gets the namespace from the dump file, *.symvers. If the symbol
has no namespace, the 'namespace' is the empty string "", which is
directly passed into sym_update_namespace(). The conversion from
"" to NULL is done in sym_update_namespace().
namespace_from_kstrtabns() exists only for creating this inconsistency.
Remove namespace_from_kstrtabns() so that sym_update_namespace() is
consistently passed with "" instead of NULL.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
These are initialized with zeros without explicit initializers.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The assigned 'export' is only used when
if (strstarts(symname, "__ksymtab_"))
is met. The else-part of the assignment is the dead code.
Move the export_from_secname() call to where it is used.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
With commit 1743694eb2 ("modpost: stop symbol preloading for
modversion CRC") applied, now export_from_sec() is useless.
handle_symbol() is called for every symbol in the ELF.
When 'symname' does not start with "__ksymtab", export_from_sec() is
called, and the returned value is stored in 'export'.
It is used in the last part of handle_symbol():
if (strstarts(symname, "__ksymtab_")) {
name = symname + strlen("__ksymtab_");
sym_add_exported(name, mod, export);
}
'export' is used only when 'symname' starts with "__ksymtab_".
So, the value returned by export_from_sec() is never used.
Remove useless export_from_sec(). This makes further cleanups possible.
I put the temporary code:
export = export_unknown;
Otherwise, I would get the compiler warning:
warning: 'export' may be used uninitialized in this function [-Wmaybe-uninitialized]
This is apparently false positive because
if (strstarts(symname, "__ksymtab_")
... is a stronger condition than:
if (strstarts(symname, "__ksymtab")
Anyway, this part will be cleaned up by the next commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Pull gpio fixes from Bartosz Golaszewski:
- fix the bounds check for the 'gpio-reserved-ranges' device property
in gpiolib-of
- drop the assignment of the pwm base number in gpio-mvebu (this was
missed by the patch doing it globally for all pwm drivers)
- fix the fwnode assignment (use own fwnode, not the parent's one) for
the GPIO irqchip in gpio-visconti
- update the irq_stat field before checking the trigger field in
gpio-pca953x
- update GPIO entry in MAINTAINERS
* tag 'gpio-fixes-for-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: pca953x: fix irq_stat not updated when irq is disabled (irq_mask not set)
gpio: visconti: Fix fwnode of GPIO IRQ
MAINTAINERS: update the GPIO git tree entry
gpio: mvebu: drop pwm base assignment
gpiolib: of: fix bounds check for 'gpio-reserved-ranges'
Pull block fixes from Jens Axboe:
"A single revert for a change that isn't needed in 5.18, and a small
series for s390/dasd"
* tag 'block-5.18-2022-05-06' of git://git.kernel.dk/linux-block:
s390/dasd: Use kzalloc instead of kmalloc/memset
s390/dasd: Fix read inconsistency for ESE DASD devices
s390/dasd: Fix read for ESE with blksize < 4k
s390/dasd: prevent double format of tracks for ESE devices
s390/dasd: fix data corruption for ESE devices
Revert "block: release rq qos structures for queue without disk"
Pull io_uring fix from Jens Axboe:
"Just a single file assignment fix this week"
* tag 'io_uring-5.18-2022-05-06' of git://git.kernel.dk/linux-block:
io_uring: assign non-fixed early for async work
Now that kernel_execve is no longer called from kernel threads stop
supporting kernel threads calling kernel_execve.
Remove the code for converting a kthread to a normal thread in execve.
Document the restriction that kthreads may not call kernel_execve by
having kernel_execve fail if called by a kthread.
Link: https://lkml.kernel.org/r/20220506141512.516114-7-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Instead of implicitly inheriting PF_KTHREAD from the parent process
examine arguments in kernel_clone_args to see if PF_KTHREAD should be
set. This makes knowledge of which new threads are kernel threads
explicit.
This also makes it so that init and the user mode helper processes
no longer have PF_KTHREAD set.
Link: https://lkml.kernel.org/r/20220506141512.516114-6-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
It is silly for user_mode_thread to leave PF_KTHREAD set
on the resulting task. Update the init process so that
it does not care if PF_KTHREAD is set or not.
Ensure do_populate_rootfs flushes all delayed fput work by calling
task_work_run. In the rare instance that async_schedule_domain calls
do_populate_rootfs synchronously it is possible do_populate_rootfs
will be called directly from the init process. At which point fput
will call "task_work_add(current, ..., TWA_RESUME)". The files on the
initramfs need to be completely put before we attempt to exec them
(which is before the code enters userspace). So call task_work_run
just in case there are any pending fput operations.
Link: https://lkml.kernel.org/r/20220506141512.516114-5-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Add fn and fn_arg members into struct kernel_clone_args and test for
them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER).
This allows any task that wants to be a user space task that only runs
in kernel mode to use this functionality.
The code on x86 is an exception and still retains a PF_KTHREAD test
because x86 unlikely everything else handles kthreads slightly
differently than user space tasks that start with a function.
The functions that created tasks that start with a function
have been updated to set ".fn" and ".fn_arg" instead of
".stack" and ".stack_size". These functions are fork_idle(),
create_io_thread(), kernel_thread(), and user_mode_thread().
Link: https://lkml.kernel.org/r/20220506141512.516114-4-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The architectures ia64 and parisc have special handling for the idle
thread in copy_process. Add a flag named idle to kernel_clone_args
and use it to explicity test if an idle process is being created.
Fullfill the expectations of the rest of the copy_thread
implemetations and pass a function pointer in .stack from fork_idle().
This makes what is happening in copy_thread better defined, and is
useful to make idle threads less special.
Link: https://lkml.kernel.org/r/20220506141512.516114-3-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
With io_uring we have started supporting tasks that are for most
purposes user space tasks that exclusively run code in kernel mode.
The kernel task that exec's init and tasks that exec user mode
helpers are also user mode tasks that just run kernel code
until they call kernel execve.
Pass kernel_clone_args into copy_thread so these oddball
tasks can be supported more cleanly and easily.
v2: Fix spelling of kenrel_clone_args on h8300
Link: https://lkml.kernel.org/r/20220506141512.516114-2-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Leon Romanovsky says:
====================
I may admit that the title of this series is not the best one as it
contains straightforward cleanups and code that converts flags to
something less confusing.
This series follows removal of FPGA IPsec code from the mlx5 driver and
based on net-next commit 4950b6990e ("Merge branch
'ocelot-vcap-cleanups'").
As such, first two patches delete code that was used by mlx5 FPGA code
but isn't needed anymore.
Third patch is simple struct rename.
Rest of the patches separate user's provided flags variable from
driver's
usage. This allows us to created more simple in-kernel interface, that
supports type checking without blending different properties into one
variable. It is achieved by converting flags to specific bitfield
variables
with clear, meaningful names.
Such change allows us more clear addition of new input flags needed to
mark IPsec offload type.
The followup code uses this extensively:
https://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma.git/log/?h=xfrm-next
====================
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Vladimir Oltean says:
====================
Simplify migration of host filtered addresses in Felix driver
The purpose of this patch set is to remove the functions
dsa_port_walk_fdbs() and dsa_port_walk_mdbs() from the DSA core, which
were introduced when the Felix driver gained support for unicast
filtering on standalone ports. They get called when changing the tagging
protocol back and forth between "ocelot" and "ocelot-8021q".
I did not realize we could get away without having them.
The patch set was regression-tested using the local_termination.sh
selftest using both tagging protocols.
====================
Link: https://lore.kernel.org/r/20220505162213.307684-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the users of these functions are gone, delete them before they gain
new ones.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The felix driver is the only user of dsa_port_walk_mdbs(), and there
isn't even a good reason for it, considering that the host MDB entries
are already saved by the ocelot switch lib in the ocelot->multicast list.
Rewrite the multicast entry migration procedure around the
ocelot->multicast list so we can delete dsa_port_walk_mdbs().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I just realized we don't need to migrate the host-filtered FDB entries
when the tagging protocol changes from "ocelot" to "ocelot-8021q".
Host-filtered addresses are learned towards the PGID_CPU "multicast"
port group, reserved by software, which contains BIT(ocelot->num_phys_ports).
That is the "special" port entry in the analyzer block for the CPU port
module.
In "ocelot" mode, the CPU port module's packets are redirected to the
NPI port.
In "ocelot-8021q" mode, felix_8021q_cpu_port_init() does something funny
anyway, and changes PGID_CPU to stop pointing at the CPU port module and
start pointing at the physical port where the DSA master is attached.
The fact that we can alter the destination of packets learned towards
PGID_CPU without altering the MAC table entries themselves means that it
is pointless to walk through the FDB entries, forget that they were
learned towards PGID_CPU, and re-learn them towards the "unicast" PGID
associated with the physical port connected to the DSA master. We can
let the PGID_CPU value change simply alter the destination of the
host-filtered unicast packets in one fell swoop.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ocelot_fdb_add() redirects FDB entries installed on the NPI port towards
the special reserved PGID_CPU used for host-filtered addresses. PGID_CPU
contains BIT(ocelot->num_phys_ports) in the destination port mask, which
is code name for the CPU port module.
Whereas felix_migrate_fdbs_to_*_port() uses the ocelot->num_phys_ports
PGID directly, and it appears that this works too. Even if this PGID is
set to zero, apparently its number is special and packets still reach
the CPU port module.
Nonetheless, in the end, these addresses end up in the same place
regardless of whether they go through an extra indirection layer or not.
Use PGID_CPU across to have more uniformity.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The gpio-keys define module level wake-up pin functionality. Move it
from the carrier board dts file to the Som dtsi file.
While at it, also re-order the properties in the gpio-keys node
alphabetically and rename to sub-node from power to wakeup.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
