TEXT_OFFSET on arm64 is a historical artifact from the early days of
the arm64 port where the boot protocol was basically 'copy this image
to the base of memory + 512k', giving us 512 KB of guaranteed BSS space
to put the swapper page tables. When the arm64 Image header was added in
v3.10, it already carried the actual value of TEXT_OFFSET, to allow the
bootloader to discover it dynamically rather than hardcode it to 512 KB.
Today, this memory window is not used for any particular purpose, and
it is simply handed to the page allocator at boot. The only reason it
still exists is because of the 512k misalignment it causes with respect
to the 2 MB aligned virtual base address of the kernel, which affects
the virtual addresses of all statically allocated objects in the kernel
image.
However, with the introduction of KASLR in v4.6, we added the concept of
relocatable kernels, which rewrite all absolute symbol references at
boot anyway, and so the placement of such kernels in the physical address
space is irrelevant, provided that the minimum segment alignment is
honoured (64 KB in most cases, 128 KB for 64k pages kernels with vmap'ed
stacks enabled). This makes 0x0 and 512 KB equally suitable values for
TEXT_OFFSET on the off chance that we are dealing with boot loaders that
ignore the value passed via the header entirely.
Considering that the distros as well as Android ship KASLR-capable
kernels today, and the fact that TEXT_OFFSET was discoverable from the
Image header from the very beginning, let's change this value to 0x0, in
preparation for removing it entirely at a later date.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200415082922.32709-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The Intel service layer driver has defined error codes for the
specific services, which started from FPGA configuration then RSU
(Remote Status Update).
Intel service layer driver should define the standard error codes
rather than keep adding more error codes for the new services.
The standard error codes will be used by all the clients of Intel service
layer driver.
Replace FPGA and RSU specific error codes with Intel service layer’s
Common error codes.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Link: https://lore.kernel.org/r/1586897274-307-2-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't need to be quite as strict about mismatched AArch32 support,
which is good because the friendly hardware folks have been busy
mismatching this to their hearts' content.
* We don't care about EL2 or EL3 (there are silly comments concerning
the latter, so remove those)
* EL1 support is gated by the ARM64_HAS_32BIT_EL1 capability and handled
gracefully when a mismatch occurs
* EL0 support is gated by the ARM64_HAS_32BIT_EL0 capability and handled
gracefully when a mismatch occurs
Relax the AArch32 checks to FTR_NONSTRICT.
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20200421142922.18950-8-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
If AArch32 is not supported at EL1, the AArch32 feature register fields
no longer advertise support for some system features:
* ISAR4.SMC
* PFR1.{Virt_frac, Sec_frac, Virtualization, Security, ProgMod}
In which case, we don't need to emit "SANITY CHECK" failures for all of
them.
Add logic to relax the strictness of individual feature register fields
at runtime and use this for the fields above if 32-bit EL1 is not
supported.
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20200421142922.18950-7-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
We already have it in v3d_dev->drm.dev with zero additional pointer
chasing. Personally I don't like duplicated pointers like this
because:
- reviewers need to check whether the pointer is for the same or
different objects if there's multiple
- compilers have an easier time too
To avoid having to pull in some big headers I implemented the casting
function as a macro instead of a static inline. Typechecking thanks to
container_of still assured.
But also a bit a bikeshed, so feel free to ignore.
v2: More parens for v3d_to_pdev macro (checkpatch)
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-11-daniel.vetter@ffwll.ch
The macros {pgd, pud, pmd}_page() retrieves the page struct of the
corresponding page frame, which is reserved as page table. There
is already a macro (phys_to_page), defined in memory.h as below,
to convert the physical address to the page struct. Also, the header
file (memory.h) has been included by pgtable.h.
#define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys)))
So it's reasonable to use the macro in pgtable.h.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200427234655.111847-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
Drop the definition and export of GZFLAGS, which was never referenced
on arm64, and whose last recorded use in the ARM port (on which arm64
was based original) was removed by patch
commit 5e89d379edb5ae08b57f39dd8d91697275245cbf [*]
Author: Russell King <rmk@flint.arm.linux.org.uk>
Date: Wed Oct 16 14:32:17 2002 +0100
[ARM] Convert ARM makefiles to new kbuild (Sam Ravnborg, Kai, rmk)
[*] git commit ID based on Thomas Gleixner's historical GIT repository at
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200415123049.25504-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add a new macro helper to combine the usual init sequence in drivers,
consisting of a kzalloc + devm_drm_dev_init + drmm_add_final_kfree
triplet. This allows us to remove the rather unsightly
drmm_add_final_kfree from all currently merged drivers.
The kerneldoc is only added for this new function. Existing kerneldoc
and examples will be udated at the very end, since once all drivers
are converted over to devm_drm_dev_alloc we can unexport a lot of
interim functions and make the documentation for driver authors a lot
cleaner and less confusing. There will be only one true way to
initialize a drm_device at the end of this, which is going to be
devm_drm_dev_alloc.
v2:
- Actually explain what this is for in the commit message (Sam)
- Fix checkpatch issues (Sam)
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-2-daniel.vetter@ffwll.ch
For historical reasons, the primary entry routine living somewhere in
the inittext section is called stext(), which is confusing, given that
there is also a section marker called _stext which lives at a fixed
offset in the image (either 64 or 4096 bytes, depending on whether
CONFIG_EFI is enabled)
Let's rename stext to primary_entry(), which is a better description
and reflects the secondary_entry() routine that already exists for
SMP boot.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200326171423.3080-1-ardb@kernel.org
Reviwed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Potentially, hvc_open() can be called in parallel when two tasks calls
open() on /dev/hvcX. In such a scenario, if the hp->ops->notifier_add()
callback in the function fails, where it sets the tty->driver_data to
NULL, the parallel hvc_open() can see this NULL and cause a memory abort.
Hence, serialize hvc_open and check if tty->private_data is NULL before
proceeding ahead.
The issue can be easily reproduced by launching two tasks simultaneously
that does nothing but open() and close() on /dev/hvcX.
For example:
$ ./simple_open_close /dev/hvc0 & ./simple_open_close /dev/hvc0 &
Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org>
Link: https://lore.kernel.org/r/20200428032601.22127-1-rananta@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
davinci_mcasp_get_dma_type() invokes dma_request_chan(), which returns a
reference of the specified dma_chan object to "chan" with increased
refcnt.
When davinci_mcasp_get_dma_type() returns, local variable "chan" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
davinci_mcasp_get_dma_type(). When chan device is NULL, the function
forgets to decrease the refcnt increased by dma_request_chan(), causing
a refcnt leak.
Fix this issue by calling dma_release_channel() when chan device is
NULL.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/1587818916-38730-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
