Move the following routines that let us start a background listener
thread and connect to a server by fd to the test_prog:
* start_server - socket+bind+listen
* connect_to_fd - connect to the server identified by fd
These will be used in the next commit.
Also, extend these helpers to support AF_INET6 and accept the family
as an argument.
v5:
* drop pthread.h (Martin KaFai Lau)
* add SO_SNDTIMEO (Martin KaFai Lau)
v4:
* export extra helper to start server without a thread (Martin KaFai Lau)
* tcp_rtt is no longer starting background thread (Martin KaFai Lau)
v2:
* put helpers into network_helpers.c (Andrii Nakryiko)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200508174611.228805-2-sdf@google.com
gpio updates for v5.8-rc1 - part1
- correct the IRQ type used in to_irq() in gpio-xgene-sb
- add new item to the TODO list
- support building gpio-pl061 as module
- improve pull-up/down support on GPIO expanders in device-tree
- several improvements in gpio-pca953x
- emit a warning for too long GPIO line names
- add MODULE_DEVICE_TABLE to gpio-tegra186
- add support for new variant to gpio-f7188x
- lsgpio can now display bias flags
Both Pericom OHCI and EHCI devices advertise PME# support from all power
states:
06:00.0 USB controller [0c03]: Pericom Semiconductor PI7C9X442SL USB OHCI Controller [12d8:400e] (rev 01) (prog-if 10 [OHCI])
Subsystem: Pericom Semiconductor PI7C9X442SL USB OHCI Controller [12d8:400e]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
06:00.2 USB controller [0c03]: Pericom Semiconductor PI7C9X442SL USB EHCI Controller [12d8:400f] (rev 01) (prog-if 20 [EHCI])
Subsystem: Pericom Semiconductor PI7C9X442SL USB EHCI Controller [12d8:400f]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
But testing shows that it's unreliable: there is a 20% chance PME# won't be
asserted when a USB device is plugged.
Remove PME support for both devices to make USB plugging work reliably.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205981
Link: https://lore.kernel.org/r/20200508065343.32751-2-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Commit 402cb8dda9 ("fscache: Attach the index key and aux data to
the cookie") added the aux_data and aux_data_len to parameters to
fscache_acquire_cookie(), and updated the callers in the NFS client.
In the process it modified the aux_data to include the change_attr,
but missed adding change_attr to a couple places where aux_data was
used. Specifically, when opening a file and the change_attr is not
added, the following attempt to lookup an object will fail inside
cachefiles_check_object_xattr() = -116 due to
nfs_fscache_inode_check_aux() failing memcmp on auxdata and returning
FSCACHE_CHECKAUX_OBSOLETE.
Fix this by adding nfs_fscache_update_auxdata() to set the auxdata
from all relevant fields in the inode, including the change_attr.
Fixes: 402cb8dda9 ("fscache: Attach the index key and aux data to the cookie")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Commit f2aedb713c ("NFS: Add fs_context support.") reworked
NFS mount code paths for fs_context support which included
super_block initialization. In the process there was an extra
return left in the code and so we never call
nfs_fscache_get_super_cookie even if 'fsc' is given on as mount
option. In addition, there is an extra check inside
nfs_fscache_get_super_cookie for the NFS_OPTION_FSCACHE which
is unnecessary since the only caller nfs_get_cache_cookie
checks this flag.
Fixes: f2aedb713c ("NFS: Add fs_context support.")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Commit 402cb8dda9 ("fscache: Attach the index key and aux data to
the cookie") added the index_key and index_key_len parameters to
fscache_acquire_cookie(), and updated the callers in the NFS client.
One of the callers was inside nfs_fscache_get_super_cookie()
and was changed to use the full struct nfs_fscache_key as the
index_key. However, a couple members of this structure contain
pointers and thus will change each time the same NFS share is
remounted. Since index_key is used for fscache_cookie->key_hash
and this subsequently is used to compare cookies, the effectiveness
of fscache with NFS is reduced to the point at which a umount
occurs. Any subsequent remount of the same share will cause a
unique NFS super_block index_key and key_hash to be generated for
the same data, rendering any prior fscache data unable to be
found. A simple reproducer demonstrates the problem.
1. Mount share with 'fsc', create a file, drop page cache
systemctl start cachefilesd
mount -o vers=3,fsc 127.0.0.1:/export /mnt
dd if=/dev/zero of=/mnt/file1.bin bs=4096 count=1
echo 3 > /proc/sys/vm/drop_caches
2. Read file into page cache and fscache, then unmount
dd if=/mnt/file1.bin of=/dev/null bs=4096 count=1
umount /mnt
3. Remount and re-read which should come from fscache
mount -o vers=3,fsc 127.0.0.1:/export /mnt
echo 3 > /proc/sys/vm/drop_caches
dd if=/mnt/file1.bin of=/dev/null bs=4096 count=1
4. Check for READ ops in mountstats - there should be none
grep READ: /proc/self/mountstats
Looking at the history and the removed function, nfs_super_get_key(),
we should only use nfs_fscache_key.key plus any uniquifier, for
the fscache index_key.
Fixes: 402cb8dda9 ("fscache: Attach the index key and aux data to the cookie")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
[Why]
We're sending the drm vblank event a frame too early in the case where
the pageflip happens close to VUPDATE and ends up blocking the signal.
The implementation in DM was previously correct *before* we started
sending vblank events from VSTARTUP unconditionally to handle cases
where HUBP was off, OTG was ON and userspace was still requesting some
DRM planes enabled. As part of that patch series we dropped VUPDATE
since it was deemed close enough to VSTARTUP, but there's a key
difference betweeen VSTARTUP and VUPDATE - the VUPDATE signal can be
blocked if we're holding the pipe lock.
There was a fix recently to revert the unconditional behavior for the
DCN VSTARTUP vblank event since it was sending the pageflip event on
the wrong frame - once again, due to blocking VUPDATE and having the
address start scanning out two frames later.
The problem with this fix is it didn't update the logic that calls
drm_crtc_handle_vblank(), so the timestamps are totally bogus now.
[How]
Essentially reverts most of the original VSTARTUP series but retains
the behavior to send back events when active planes == 0.
Some refactoring/cleanup was done to not have duplicated code in both
the handlers.
Fixes: 16f17eda8b ("drm/amd/display: Send vblank and user events at vsartup for DCN")
Fixes: 3a2ce8d66a ("drm/amd/display: Disable VUpdate interrupt for DCN hardware")
Fixes: 2b5aed9ac3 ("drm/amd/display: Fix pageflip event race condition for DCN.")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-and-Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.6.x
This reverts commit df5db5f9ee.
This patch fixes a regression: patch df5db5f9ee allowed function
run_queue() to bypass its call to do_xmote() if revokes were queued for
the glock. That's wrong because its call to do_xmote() is what is
responsible for calling the go_sync() glops functions to sync both
the ail list and any revokes queued for it. By bypassing the call,
gfs2 could get into a stand-off where the glock could not be demoted
until its revokes are written back, but the revokes would not be
written back because do_xmote() was never called.
It "sort of" works, however, because there are other mechanisms like
the log flush daemon (logd) that can sync the ail items and revokes,
if it deems it necessary. The problem is: without file system pressure,
it might never deem it necessary.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, if the go_sync operation returned an error during
the do_xmote process (such as unable to sync metadata to the journal)
the code did goto out. That kept the glock locked, so it could not be
given away, which correctly avoids file system corruption. However,
it never set the withdraw bit or requeueing the glock work. So it would
hang forever, unable to ever demote the glock.
This patch changes to goto to a new label, skip_inval, so that errors
from go_sync are treated the same way as errors from go_inval:
The delayed withdraw bit is set and the work is requeued. That way,
the logd should eventually figure out there's a problem and withdraw
properly there.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Releasing the AMDGPU BO ref directly leads to problems when BOs were
exported as DMA bufs. Releasing the GEM reference makes sure that the
AMDGPU/TTM BO is not freed too early.
Also take a GEM reference when importing BOs from DMABufs to keep
references to imported BOs balances properly.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As this is already properly handled in amdgpu_gfx_off_ctrl(). In fact,
this unnecessary cancel_delayed_work_sync may leave a small time window
for race condition and is dangerous.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We only need to set DPM_FLAG_NEVER_SKIP for the legacy ATPX
BOCO case. D3cold and BACO work as expected.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should be checking whether the driver enabled runtime pm
rather than whether the asic supports BOCO or BACO. That said
in general they are equivalent unless the user has disabled
runpm or it has been disabled for a specific asic.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_hive_id/get_node_id/get_topology_info/set_topology_info
are common xgmi command supported by TA for all the ASICs
that support xgmi link. They should be implemented as common
helper functions to avoid duplicated code per IP generation
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The wov_hotword_model_put() function has multiple large variables on
its stack, the largest of which is the result of SHASH_DESC_ON_STACK().
In total, this exceeds the warning limit for 32-bit architectures:
sound/soc/codecs/cros_ec_codec.c:776:12: error: stack frame size of 1152 bytes in function 'wov_hotword_model_put' [-Werror,-Wframe-larger-than=]
The function already has a dynamic crypto_alloc_shash() allocation, so
using kmalloc() for the descriptor is correct as well and does not
introduce any additional failure scenarios. With this, the stack usage
of wov_hotword_model_put() gets reduced to 480 bytes in my test
configuration.
Fixes: b6bc07d436 ("ASoC: cros_ec_codec: support WoV")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200507213405.1869430-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull SCSI fixes from James Bottomley:
"Four minor fixes, all in drivers (qla2xxx, ibmvfc, ibmvscsi)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ibmvscsi: Fix WARN_ON during event pool release
scsi: ibmvfc: Don't send implicit logouts prior to NPIV login
scsi: qla2xxx: Delete all sessions before unregister local nvme port
scsi: qla2xxx: Fix hang when issuing nvme disconnect-all in NPIV
Pull ceph fixes from Ilya Dryomov:
"Fixes for an endianness handling bug that prevented mounts on
big-endian arches, a spammy log message and a couple error paths.
Also included a MAINTAINERS update"
* tag 'ceph-for-5.7-rc5' of git://github.com/ceph/ceph-client:
ceph: demote quotarealm lookup warning to a debug message
MAINTAINERS: remove myself as ceph co-maintainer
ceph: fix double unlock in handle_cap_export()
ceph: fix special error code in ceph_try_get_caps()
ceph: fix endianness bug when handling MDS session feature bits
lib: Add linear ranges helper library and start using it
Series extracts a "linear ranges" helper out of the regulator
framework. Linear ranges helper is intended to help converting
real-world values to register values when conversion is linear. I
suspect this is useful also for power subsystem and possibly for clk.
Many devices have control registers which control some measurable
property. Often a register contains control field so that change in
this field causes linear change in the controlled property. It is not
a rare case that user wants to give 'meaningful' control values and
driver needs to convert them to register field values. Even more
often user wants to 'see' the currently set value - again in
meaningful units - and driver needs to convert the values it reads
from register to these meaningful units. Examples of this include:
- regulators, voltage/current configurations
- power, voltage/current configurations
- clk(?) NCOs
and maybe others I can't think of right now.
Provide a linear_range helper which can do conversion from user value
to register value 'selector'.
The idea here is stolen from regulator framework and patches refactoring
the regulator helpers to use this are following.
Current implementation does not support inversely proportional ranges
but it might be useful if we could support also inversely proportional
ranges?
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/59259bc475e0c800eb4bb163f02528c7c01f7b3a.1588944082.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch rearranges gfs2_add_revoke so that the extra glock
reference is added earlier on in the function to avoid races in which
the glock is freed before the new reference is taken.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, function gfs2_quota_unlock checked if quotas are
turned off, and if so, it branched to label out, which called
gfs2_quota_unhold. With the new system of gfs2_qa_get and put, we
no longer want to call gfs2_quota_unhold or we won't balance our
gets and puts.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function gfs2_quota_lock checked if it was called
from a privileged user, and if so, it bypassed the quota check:
superuser can operate outside the quotas.
That's the wrong place for the check because the lock/unlock functions
are separate from the lock_check function, and you can do lock and
unlock without actually checking the quotas.
This patch moves the check to gfs2_quota_lock_check.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch removes a check from gfs2_quota_check for whether quotas
are enabled by the superblock. There is a test just prior for the
GIF_QD_LOCKED bit in the inode, and that can only be set by functions
that already check that quotas are enabled in the superblock.
Therefore, the check is redundant.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, gfs2_quota_change() would BUG_ON if the
qa_ref counter was not a positive number. This patch changes it to
be a withdraw instead. That way we can debug things more easily.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch fixes a couple of places in which gfs2_qa_get and gfs2_qa_put are
not balanced: we now keep references around whenever a file is open for writing
(see gfs2_open_common and gfs2_release), so we need to put all references we
grab in function gfs2_create_inode. This was broken in the successful case and
on one error path.
This also means that we don't have a reference to put in gfs2_evict_inode.
In addition, gfs2_qa_put was called for the wrong inode in gfs2_link.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
