The BOE NV133FHM-N61 is documented in the original commit to be a
13.3" panel, but the size listed in our struct doesn't match.
Specifically:
math.sqrt(30.0 * 30.0 + 18.7 * 18.7) / 2.54 ==> 13.92
Searching around on the Internet shows that the size that was in the
structure was the "Outline Size", not the "Display Area". Let's fix
it.
Also the Internet says that this panel supports 262K colors. That's
6bpp, not 8bpp.
Fixes: b0c664cc80 ("panel: simple: Add BOE NV133FHM-N61")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508155859.1.I4d29651c0837b4095fb4951253f44036a371732f@changeid
Pull io_uring fixes from Jens Axboe:
- Fix finish_wait() balancing in file cancelation (Xiaoguang)
- Ensure early cleanup of resources in ring map failure (Xiaoguang)
- Ensure IORING_OP_SLICE does the right file mode checks (Pavel)
- Remove file opening from openat/openat2/statx, it's not needed and
messes with O_PATH
* tag 'io_uring-5.7-2020-05-08' of git://git.kernel.dk/linux-block:
io_uring: don't use 'fd' for openat/openat2/statx
splice: move f_mode checks to do_{splice,tee}()
io_uring: handle -EFAULT properly in io_uring_setup()
io_uring: fix mismatched finish_wait() calls in io_uring_cancel_files()
Mark Starovoytov says:
====================
net: atlantic: driver updates
This patch series contains several minor cleanups for the previously
submitted series.
We also add Marvell copyrights on newly touched files.
v2:
* accommodated review comments related to the last patch in series
(MAC generation)
v1: https://patchwork.ozlabs.org/cover/1285011/
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch unifies invalid MAC address handling with other drivers.
Basically we've switched to using standard APIs (is_valid_ether_addr /
eth_hw_addr_random) where possible.
It's worth noting that some of engineering Aquantia NICs might be
provisioned with a partially zeroed out MAC, which is still invalid,
but not caught by is_valid_ether_addr(), so we've added a special
handling for this case.
Also adding a warning in case of fallback to random MAC, because
this shouldn't be needed on production NICs, they should all be
provisioned with unique MAC.
NB! Default systemd/udevd configuration is 'MACAddressPolicy=persistent'.
This causes MAC address to be persisted across driver reloads and
reboots. We had to change it to 'none' for verification purposes.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch removes unnecessary check for boot code survivability before
reset request.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes a couple of minor merge issues found in macsec_api.c
after corresponding patch series has been applied.
These are not real bugs, so pushing to net-next.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patches fixes the review comment made by Jakub Kicinski
in the "net: atlantic: A2 support" patch series.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
do_splice() doesn't expect len to be 0. Just always return 0 in this
case as splice(2) does.
Fixes: 7d67af2c01 ("io_uring: add splice(2) support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the patchset that introduced exec_update_mutex there were a few last
minute discoveries and fixes that left the code in a state that can
be very easily be improved.
During the merge window we discussed the first three of these patches
and I promised I would resend them.
What the first patch does is it makes the the calls in the binfmts:
flush_old_exec();
/* set the personality */
setup_new_exec();
install_exec_creds();
With no sleeps or anything in between.
At the conclusion of this set of changes the the calls in the binfmts
are:
begin_new_exec();
/* set the personality */
setup_new_exec();
The intent is to make the code easier to follow and easier to change.
Eric W. Biederman (7):
binfmt: Move install_exec_creds after setup_new_exec to match binfmt_elf
exec: Make unlocking exec_update_mutex explict
exec: Rename the flag called_exec_mmap point_of_no_return
exec: Merge install_exec_creds into setup_new_exec
exec: In setup_new_exec cache current in the local variable me
exec: Move most of setup_new_exec into flush_old_exec
exec: Rename flush_old_exec begin_new_exec
Documentation/trace/ftrace.rst | 2 +-
arch/x86/ia32/ia32_aout.c | 4 +-
fs/binfmt_aout.c | 3 +-
fs/binfmt_elf.c | 3 +-
fs/binfmt_elf_fdpic.c | 3 +-
fs/binfmt_flat.c | 4 +-
fs/exec.c | 162 ++++++++++++++++++++---------------------
include/linux/binfmts.h | 10 +--
kernel/events/core.c | 2 +-
9 files changed, 92 insertions(+), 101 deletions(-)
Link: https://lkml.kernel.org/r/87h7wujhmz.fsf@x220.int.ebiederm.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507185408.GA14561@embeddedor
Add a simple struct nsset. It holds all necessary pieces to switch to a new
set of namespaces without leaving a task in a half-switched state which we
will make use of in the next patch. This patch switches the existing setns
logic over without causing a change in setns() behavior. This brings
setns() closer to how unshare() works(). The prepare_ns() function is
responsible to prepare all necessary information. This has two reasons.
First it minimizes dependencies between individual namespaces, i.e. all
install handler can expect that all fields are properly initialized
independent in what order they are called in. Second, this makes the code
easier to maintain and easier to follow if it needs to be changed.
The prepare_ns() helper will only be switched over to use a flags argument
in the next patch. Here it will still use nstype as a simple integer
argument which was argued would be clearer. I'm not particularly
opinionated about this if it really helps or not. The struct nsset itself
already contains the flags field since its name already indicates that it
can contain information required by different namespaces. None of this
should have functional consequences.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Jann Horn <jannh@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20200505140432.181565-2-christian.brauner@ubuntu.com
With a recent fix to the pinctrl-cherryview driver we now have
2 drivers open-coding the parameter building / passing for calling
_REG on an ACPI handle.
Add a helper for this, so that these 2 drivers can be converted to this
helper.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix sparse warnings:
drivers/acpi/acpi_dbg.c:748:12: warning:
symbol 'acpi_aml_init' was not declared. Should it be static?
drivers/acpi/acpi_dbg.c:774:13: warning:
symbol 'acpi_aml_exit' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The embedded controller boot resources table needs to be
released after using it.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: avoid adding a label in acpi_ec_ecdt_start() ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
hest_tab will be used after hest_init(), but we need to release
it for error path.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The mapped error record serialization table needs to be
released for error path of erst_init().
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The mapped error injection table will be used after einj_init()
for debugfs, but it should be released for module exit and error
path of einj_init().
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The mapped boot error record table is not used after
bert_init(), release it.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The mapped watchdog action table should be released after the
successfully parsing, and the failure path in the driver
initialization.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The mapped LPIT table is not used for runtime after init,
put the ACPI table to release the table mapping.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 4b0e043386c7e698bea9e862f60a388647f56622
Previously, there was a mixup where _NIG required one parameter and
_NIH required zero parameters. This changes swaps these parameter
requirements. Now this change requires _NIH to be called with one
parameter and _NIG requires zero.
Link: https://github.com/acpica/acpica/commit/4b0e0433
Reported-by: Paul A Lohr <paul.a.lohr@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit cd66d0a50fdc9cc4dcd998e08e7aa3c4154bea2d
Disassembler is intended to emit existing ASL code as-is. Therefore,
error messages emitted during disassembly should be ignored or
handled in a way such that the disassembler can continue to parse the
AML. This change ignores AE_ALREADY_EXISTS errors during the deferred
Op parsing for create operators in order to complete parsing ASL
termlists.
Link: https://github.com/acpica/acpica/commit/cd66d0a5
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The same WQE opcode might be used in different ICOSQ flows
and WQE types.
To have a better distinguishability, replace it with an enum that
better indicates the WQE type and flow it is used for.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The include of Ethernet driver header in core is not needed
and actually wrong.
Remove it.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Struct assignment looks more clean, and implies resetting
the not assigned fields to zero, instead of holding values
from older ring cycles.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Into the txrx header file.
The mlx5e_sq_wqe_info structure describes WQE info for the ICOSQ,
rename it to better reflect this.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Every single DUMP WQE resides in a single WQEBB.
As the pi is calculated per each one separately, there is
no real need for a contiguous room for them, allow them to populate
different WQ fragments.
This reduces WQ waste and improves its utilization.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
For the static and progress context params WQEs, do the edge
filling separately.
This improves the WQ utilization, code readability, and reduces
the chance of future bugs.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
After previous modifications, the offloads are no longer called one by
one, the pi is calculated and the wqe is cleared on between of TLS and
IPSEC offloads, which doesn't quite fit mlx5e_accel_handle_tx's purpose.
This patch splits mlx5e_accel_handle_tx into two functions that
correspond to two logical phases of running offloads:
1. Before fetching a WQE. Here runs the code that can post WQEs on its
own, before the main WQE is fetched. It's the main part of TLS offload.
2. After fetching a WQE. Here runs the code that updates the WQE's
fields, but can't post other WQEs any more. It's a minor part of TLS
offload that sets the tisn field in the cseg, and eseg-based offloads
(currently IPSEC, and later patches will move GENEVE and checksum
offloads there, too).
It allows to make mlx5e_xmit take care of all actions needed to transmit
a packet in the right order, improve the structure of the code and
reduce unnecessary operations. The structure will be further improved in
the following patches (all eseg-based offloads will be moved to a single
place, and reserving space for the main WQE will happen between phase 1
and phase 2 of offloads to eliminate unneeded data movements).
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mlx5e_udp_gso_handle_tx_skb updates the length field in the UDP header
in case of GSO. It doesn't interfere with other offloads, so do it first
to simplify further restructuring of the code. This way we'll make all
independent modifications to the SKB before starting to work with WQEs.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
TLS offload may write a 32-bit field (tisn) to the cseg of the WQE. To
do that, it receives pi and wqe pointers. As TLS offload may also send
additional WQEs, it has to update pi and wqe, and in many cases it even
doesn't use pi calculated before and wqe zeroed before and does it
itself. Also, mlx5e_sq_xmit has to copy the whole cseg if it goes to the
mlx5e_fill_sq_frag_edge flow. This all is not efficient.
It's more efficient to do the following:
1. Just return tisn from TLS offload and make the caller fill it in a
more appropriate place.
2. Calculate pi and clear wqe after calling TLS offload.
3. If TLS offload has to send WQEs, calculate pi and clear wqe just
before that. It's already done in all places anyway, so this commit
allows to remove some redundant memsets and calls.
Copying of cseg will be eliminated in one of the following commits, and
all other stuff is done here.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
