If we're unlucky with timing, we could be running task_work after
having dropped the memory context in the sq thread. Since dropping
the context requires a runnable task state, we cannot reliably drop
it as part of our check-for-work loop in io_sq_thread(). Instead,
abstract out the mm acquire for the sq thread into a helper, and call
it from the async task work handler.
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In io_complete_rw_iopoll(), stores to io_kiocb's result and iopoll
completed are two independent store operations, to ensure that once
iopoll_completed is ture and then req->result must been perceived by
the cpu executing io_do_iopoll(), proper memory barrier should be used.
And in io_do_iopoll(), we check whether req->result is EAGAIN, if it is,
we'll need to issue this io request using io-wq again. In order to just
issue a single smp_rmb() on the completion side, move the re-submit work
to io_iopoll_complete().
Cc: stable@vger.kernel.org
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
[axboe: don't set ->iopoll_completed for -EAGAIN retry]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In IOPOLL mode, for EAGAIN error, we'll try to submit io request
again using io-wq, so don't fail rest of links if this io request
has links.
Cc: stable@vger.kernel.org
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Other drivers use lowercase hexadecimal literals, so convert the IQS620a
driver to do the same for consistency.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Because period and duty cycle are defined as ints with units of
nanoseconds, the maximum time duration that can be set is limited to
~2.147 seconds. Change their definitions to u64 in the structs of the
PWM framework so that higher durations may be set.
Also use the right format specifiers in debug prints in both core.c,
pwm-stm32-lp.c as well as video/fbdev/ssd1307fb.c.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Since the PWM framework is switching struct pwm_args.period's datatype
to u64, prepare for this transition by using div64_u64() to handle a
64-bit divisor.
Also ensure that divide-by-zero (with fixed_rate as denominator) does
not happen with an explicit check with probe failure as a consequence.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Since the PWM framework is switching struct pwm_state.period's datatype
to u64, prepare for this transition by using div_u64 to handle a 64-bit
dividend instead of a straight division operation.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Since the PWM framework is switching struct pwm_state.period's datatype
to u64, prepare for this transition by using nsecs_to_jiffies() which
does away with the need for a division operation.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Since the PWM framework is switching struct pwm_args.period's datatype
to u64, prepare for this transition by using DIV64_U64_ROUND_CLOSEST to
handle a 64-bit divisor.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The PWM framework is going to change the PWM period and duty cycles to
be 64-bit unsigned integers. To avoid build errors on platforms that do
not natively support 64-bit division, use explicity 64-bit division.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Pull dma-mapping fixes from Christoph Hellwig:
"Fixes for the SEV atomic pool (Geert Uytterhoeven and David Rientjes)"
* tag 'dma-mapping-5.8-3' of git://git.infradead.org/users/hch/dma-mapping:
dma-pool: decouple DMA_REMAP from DMA_COHERENT_POOL
dma-pool: fix too large DMA pools on medium memory size systems
We are relying on the fact, that we can pass > sizeof(int) optvals
to the SOL_IP+IP_FREEBIND option (the kernel will take first 4 bytes).
In the BPF program we check that we can only touch PAGE_SIZE bytes,
but the real optlen is PAGE_SIZE * 2. In both cases, we override it to
some predefined value and trim the optlen.
Also, let's modify exiting IP_TOS usecase to test optlen=0 case
where BPF program just bypasses the data as is.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200617010416.93086-2-sdf@google.com
Attaching to these hooks can break iptables because its optval is
usually quite big, or at least bigger than the current PAGE_SIZE limit.
David also mentioned some SCTP options can be big (around 256k).
For such optvals we expose only the first PAGE_SIZE bytes to
the BPF program. BPF program has two options:
1. Set ctx->optlen to 0 to indicate that the BPF's optval
should be ignored and the kernel should use original userspace
value.
2. Set ctx->optlen to something that's smaller than the PAGE_SIZE.
v5:
* use ctx->optlen == 0 with trimmed buffer (Alexei Starovoitov)
* update the docs accordingly
v4:
* use temporary buffer to avoid optval == optval_end == NULL;
this removes the corner case in the verifier that might assume
non-zero PTR_TO_PACKET/PTR_TO_PACKET_END.
v3:
* don't increase the limit, bypass the argument
v2:
* proper comments formatting (Jakub Kicinski)
Fixes: 0d01da6afc ("bpf: implement getsockopt and setsockopt hooks")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Link: https://lore.kernel.org/bpf/20200617010416.93086-1-sdf@google.com
Syzkaller discovered that creating a hash of type devmap_hash with a large
number of entries can hit the memory allocator limit for allocating
contiguous memory regions. There's really no reason to use kmalloc_array()
directly in the devmap code, so just switch it to the existing
bpf_map_area_alloc() function that is used elsewhere.
Fixes: 6f9d451ab1 ("xdp: Add devmap_hash map type for looking up devices by hashed index")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200616142829.114173-1-toke@redhat.com
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct dm_target_deps {
...
__u64 dev[0]; /* out */
};
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The array bio_in_progress is only used with ssd mode. So skip
writecache_wait_for_ios in writecache_discard when pmem mode.
Signed-off-by: Huaisheng Ye <yehs1@lenovo.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
To pick the changes from:
b383a73f2b ("fs/ext4: Introduce DAX inode flag")
And silence this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
It causes various beautifiers for things like fspick, fsmount, etc (see
below) to get rebuilt, but this specific change doesn't make 'perf
trace' be capable of decoding anything new, as we still don't decode
what comes from ioctls, just its cmds.
Details about the update:
$ cp include/uapi/linux/fs.h tools/include/uapi/linux/fs.h
$ git diff
diff --git a/tools/include/uapi/linux/fs.h b/tools/include/uapi/linux/fs.h
index 379a612f8f1d..f44eb0a04afd 100644
--- a/tools/include/uapi/linux/fs.h
+++ b/tools/include/uapi/linux/fs.h
@@ -262,6 +262,7 @@ struct fsxattr {
#define FS_EA_INODE_FL 0x00200000 /* Inode used for large EA */
#define FS_EOFBLOCKS_FL 0x00400000 /* Reserved for ext4 */
#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
+#define FS_DAX_FL 0x02000000 /* Inode is DAX */
#define FS_INLINE_DATA_FL 0x10000000 /* Reserved for ext4 */
#define FS_PROJINHERIT_FL 0x20000000 /* Create with parents projid */
#define FS_CASEFOLD_FL 0x40000000 /* Folder is case insensitive */
$ m
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j8' parallel build
INSTALL GTK UI
CC /tmp/build/perf/builtin-trace.o
DESCEND plugins
CC /tmp/build/perf/trace/beauty/fsmount.o
CC /tmp/build/perf/trace/beauty/fspick.o
CC /tmp/build/perf/trace/beauty/mount_flags.o
CC /tmp/build/perf/trace/beauty/move_mount.o
CC /tmp/build/perf/trace/beauty/renameat.o
CC /tmp/build/perf/trace/beauty/sync_file_range.o
INSTALL trace_plugins
LD /tmp/build/perf/trace/beauty/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
<SNIP>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
7e5b3c267d ("x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation")
Addressing these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
With this one will be able to use these new AMD MSRs in filters, by
name, e.g.:
# perf trace -e msr:* --filter "msr==IA32_MCU_OPT_CTRL"
^C#
Using -v we can see how it sets up the tracepoint filters, converting
from the string in the filter to the numeric value:
# perf trace -v -e msr:* --filter "msr==IA32_MCU_OPT_CTRL"
Using CPUID GenuineIntel-6-8E-A
0x123
New filter for msr:read_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
0x123
New filter for msr:write_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
0x123
New filter for msr:rdpmc: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
mmap size 528384B
^C#
The updating process shows how this affects tooling in more detail:
$ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
--- tools/arch/x86/include/asm/msr-index.h 2020-06-03 10:36:09.959910238 -0300
+++ arch/x86/include/asm/msr-index.h 2020-06-17 10:04:20.235052901 -0300
@@ -128,6 +128,10 @@
#define TSX_CTRL_RTM_DISABLE BIT(0) /* Disable RTM feature */
#define TSX_CTRL_CPUID_CLEAR BIT(1) /* Disable TSX enumeration */
+/* SRBDS support */
+#define MSR_IA32_MCU_OPT_CTRL 0x00000123
+#define RNGDS_MITG_DIS BIT(0)
+
#define MSR_IA32_SYSENTER_CS 0x00000174
#define MSR_IA32_SYSENTER_ESP 0x00000175
#define MSR_IA32_SYSENTER_EIP 0x00000176
$ set -o vi
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2020-06-17 10:05:49.653114752 -0300
+++ after 2020-06-17 10:06:01.777258731 -0300
@@ -51,6 +51,7 @@
[0x0000011e] = "IA32_BBL_CR_CTL3",
[0x00000120] = "IDT_MCR_CTRL",
[0x00000122] = "IA32_TSX_CTRL",
+ [0x00000123] = "IA32_MCU_OPT_CTRL",
[0x00000140] = "MISC_FEATURES_ENABLES",
[0x00000174] = "IA32_SYSENTER_CS",
[0x00000175] = "IA32_SYSENTER_ESP",
$
The related change to cpu-features.h affects this:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
This shouldn't be affecting that 'perf bench' entry:
$ find tools/perf/ -type f | xargs grep SRBDS
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Gross <mgross@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get some newer headers that got out of sync with the copies in tools/
so that we can try to have the tools/perf/ build clean for v5.8 with
fewer pull requests.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes segmentation fault when trying to interpret zstd-compressed data
with perf script:
```
$ perf record -z ls
...
[ perf record: Captured and wrote 0,010 MB perf.data, compressed (original 0,001 MB, ratio is 2,190) ]
$ memcheck perf script
...
==67911== Invalid read of size 4
==67911== at 0x5568188: ZSTD_decompressStream (in /usr/lib/libzstd.so.1.4.5)
==67911== by 0x6E726B: zstd_decompress_stream (zstd.c:100)
==67911== by 0x65729C: perf_session__process_compressed_event (session.c:72)
==67911== by 0x6598E8: perf_session__process_user_event (session.c:1583)
==67911== by 0x65BA59: reader__process_events (session.c:2177)
==67911== by 0x65BA59: __perf_session__process_events (session.c:2234)
==67911== by 0x65BA59: perf_session__process_events (session.c:2267)
==67911== by 0x5A7397: __cmd_script (builtin-script.c:2447)
==67911== by 0x5A7397: cmd_script (builtin-script.c:3840)
==67911== by 0x5FE9D2: run_builtin (perf.c:312)
==67911== by 0x711627: handle_internal_command (perf.c:364)
==67911== by 0x711627: run_argv (perf.c:408)
==67911== by 0x711627: main (perf.c:538)
==67911== Address 0x71d8 is not stack'd, malloc'd or (recently) free'd
```
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LPU-Reference: 20200612230333.72140-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make sure that the local variable rzone in dmz_do_reclaim() is always
initialized before being used for printing debug messages.
Fixes: f97809aec5 ("dm zoned: per-device reclaim")
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Currently, updating binding table (add service binding to
name table/withdraw a service binding) is being sent over replicast.
However, if we are scaling up clusters to > 100 nodes/containers this
method is less affection because of looping through nodes in a cluster one
by one.
It is worth to use broadcast to update a binding service. This way, the
binding table can be updated on all peer nodes in one shot.
Broadcast is used when all peer nodes, as indicated by a new capability
flag TIPC_NAMED_BCAST, support reception of this message type.
Four problems need to be considered when introducing this feature.
1) When establishing a link to a new peer node we still update this by a
unicast 'bulk' update. This may lead to race conditions, where a later
broadcast publication/withdrawal bypass the 'bulk', resulting in
disordered publications, or even that a withdrawal may arrive before the
corresponding publication. We solve this by adding an 'is_last_bulk' bit
in the last bulk messages so that it can be distinguished from all other
messages. Only when this message has arrived do we open up for reception
of broadcast publications/withdrawals.
2) When a first legacy node is added to the cluster all distribution
will switch over to use the legacy 'replicast' method, while the
opposite happens when the last legacy node leaves the cluster. This
entails another risk of message disordering that has to be handled. We
solve this by adding a sequence number to the broadcast/replicast
messages, so that disordering can be discovered and corrected. Note
however that we don't need to consider potential message loss or
duplication at this protocol level.
3) Bulk messages don't contain any sequence numbers, and will always
arrive in order. Hence we must exempt those from the sequence number
control and deliver them unconditionally. We solve this by adding a new
'is_bulk' bit in those messages so that they can be recognized.
4) Legacy messages, which don't contain any new bits or sequence
numbers, but neither can arrive out of order, also need to be exempt
from the initial synchronization and sequence number check, and
delivered unconditionally. Therefore, we add another 'is_not_legacy' bit
to all new messages so that those can be distinguished from legacy
messages and the latter delivered directly.
v1->v2:
- fix warning issue reported by kbuild test robot <lkp@intel.com>
- add santiy check to drop the publication message with a sequence
number that is lower than the agreed synch point
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During recent refactorings, bpf_probe_read_kernel_str() started returning 0 on
success, instead of amount of data successfully read. This majorly breaks
applications relying on bpf_probe_read_kernel_str() and bpf_probe_read_str()
and their results. Fix this by returning actual number of bytes read.
Fixes: 8d92db5c04 ("bpf: rework the compat kernel probe handling")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200616050432.1902042-1-andriin@fb.com
Mostly for historical reasons, q->blk_trace is assigned through xchg()
and cmpxchg() atomic operations. Although this is correct, sparse
complains about this because it violates rcu annotations since commit
c780e86dd4 ("blktrace: Protect q->blk_trace with RCU") which started
to use rcu for accessing q->blk_trace. Furthermore there's no real need
for atomic operations anymore since all changes to q->blk_trace happen
under q->blk_trace_mutex and since it also makes more sense to check if
q->blk_trace is set with the mutex held earlier.
So let's just replace xchg() with rcu_replace_pointer() and cmpxchg()
with explicit check and rcu_assign_pointer(). This makes the code more
efficient and sparse happy.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use one blktrace per request_queue, that means one per the entire
disk. So we cannot run one blktrace on say /dev/vda and then /dev/vda1,
or just two calls on /dev/vda.
We check for concurrent setup only at the very end of the blktrace setup though.
If we try to run two concurrent blktraces on the same block device the
second one will fail, and the first one seems to go on. However when
one tries to kill the first one one will see things like this:
The kernel will show these:
```
debugfs: File 'dropped' in directory 'nvme1n1' already present!
debugfs: File 'msg' in directory 'nvme1n1' already present!
debugfs: File 'trace0' in directory 'nvme1n1' already present!
``
And userspace just sees this error message for the second call:
```
blktrace /dev/nvme1n1
BLKTRACESETUP(2) /dev/nvme1n1 failed: 5/Input/output error
```
The first userspace process #1 will also claim that the files
were taken underneath their nose as well. The files are taken
away form the first process given that when the second blktrace
fails, it will follow up with a BLKTRACESTOP and BLKTRACETEARDOWN.
This means that even if go-happy process #1 is waiting for blktrace
data, we *have* been asked to take teardown the blktrace.
This can easily be reproduced with break-blktrace [0] run_0005.sh test.
Just break out early if we know we're already going to fail, this will
prevent trying to create the files all over again, which we know still
exist.
[0] https://github.com/mcgrof/break-blktrace
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The server is failing to apply the umask when creating new objects on
filesystems without ACL support.
To reproduce this, you need to use NFSv4.2 and a client and server
recent enough to support umask, and you need to export a filesystem that
lacks ACL support (for example, ext4 with the "noacl" mount option).
Filesystems with ACL support are expected to take care of the umask
themselves (usually by calling posix_acl_create).
For filesystems without ACL support, this is up to the caller of
vfs_create(), vfs_mknod(), or vfs_mkdir().
Reported-by: Elliott Mitchell <ehem+debian@m5p.com>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Fixes: 47057abde5 ("nfsd: add support for the umask attribute")
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The cookie tracking in dmaengine expects all submissions completed in
order. Some DMA devices like Intel DSA can complete submissions out of
order, especially if configured with a work queue sharing multiple DMA
engines. Add a status DMA_OUT_OF_ORDER that tx_status can be returned for
those DMA devices. The user should use callbacks to track the completion
rather than the DMA cookie. This would address the issue of dmatest
complaining that descriptors are "busy" when the cookie count goes
backwards due to out of order completion. Add DMA_COMPLETION_NO_ORDER
DMA capability to allow the driver to flag the device's ability to complete
operations out of order.
Reported-by: Swathi Kovvuri <swathi.kovvuri@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Swathi Kovvuri <swathi.kovvuri@intel.com>
Link: https://lore.kernel.org/r/158939557151.20335.12404113976045569870.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
IRQF_NO_SUSPEND flag is set for MU IRQ of IPC work, but with this
flag set, IRQD_WAKEUP_ARMED flag will NOT be set during
suspend_device_irq() phase, then when MU IRQ arrives, it will NOT
wake up system from suspend.
To fix this issue, pm_system_wakeup() is called in general MU IRQ
handler to make sure system can be waked up when MU IRQ arrives.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When kobject_init_and_add() returns an error, it should be handled
because kobject_init_and_add() takes a reference even when it fails. If
this function returns an error, kobject_put() must be called to properly
clean up the memory associated with the object.
Therefore, replace calling kfree() and call kobject_put() and add a
missing kobject_put() in the edac_device_register_sysfs_main_kobj()
error path.
[ bp: Massage and merge into a single patch. ]
Fixes: b2ed215a33 ("Kobject: change drivers/edac to use kobject_init_and_add")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200528202238.18078-1-wu000273@umn.edu
Link: https://lkml.kernel.org/r/20200528203526.20908-1-wu000273@umn.edu
On 32-bit ARM, we may boot at HYP mode, or with the MMU and caches off
(or both), even though the EFI spec does not actually support this.
While booting at HYP mode is something we might tolerate, fiddling
with the caches is a more serious issue, as disabling the caches is
tricky to do safely from C code, and running without the Dcache makes
it impossible to support unaligned memory accesses, which is another
explicit requirement imposed by the EFI spec.
So take note of the CPU mode and MMU state in the EFI stub diagnostic
output so that we can easily diagnose any issues that may arise from
this. E.g.,
EFI stub: Entering in SVC mode with MMU enabled
Also, capture the CPSR and SCTLR system register values at EFI stub
entry, and after ExitBootServices() returns, and check whether the
MMU and Dcache were disabled at any point. If this is the case, a
diagnostic message like the following will be emitted:
efi: [Firmware Bug]: EFI stub was entered with MMU and Dcache disabled, please fix your firmware!
efi: CPSR at EFI stub entry : 0x600001d3
efi: SCTLR at EFI stub entry : 0x00c51838
efi: CPSR after ExitBootServices() : 0x600001d3
efi: SCTLR after ExitBootServices(): 0x00c50838
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
On arm64, the EFI stub is built into the kernel proper, and so the stub
can refer to its symbols directly. Therefore, the practice of using EFI
configuration tables to pass information between them is never needed,
so we can omit any code consuming such tables when building for arm64.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Commit
17054f492d ("efi/x86: Implement mixed mode boot without the handover protocol")
introduced a new entry point for the EFI stub to be booted in mixed mode
on 32-bit firmware.
When entered via efi32_pe_entry, control is first transferred to
startup_32 to setup for the switch to long mode, and then the EFI stub
proper is entered via efi_pe_entry. efi_pe_entry is an MS ABI function,
and the ABI requires 32 bytes of shadow stack space to be allocated by
the caller, as well as the stack being aligned to 8 mod 16 on entry.
Allocate 40 bytes on the stack before switching to 64-bit mode when
calling efi_pe_entry to account for this.
For robustness, explicitly align boot_stack_end to 16 bytes. It is
currently implicitly aligned since .bss is cacheline-size aligned,
head_64.o is the first object file with a .bss section, and the heap and
boot sizes are aligned.
Fixes: 17054f492d ("efi/x86: Implement mixed mode boot without the handover protocol")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200617131957.2507632-1-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
