We have lots of callers of:
io_cqring_add_event(req, result);
io_put_req(req);
Provide a helper that does this for us. It helps clean up the code, and
also provides a more convenient location for us to change the completion
handling.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_queue_sqe() tries to handle all request of a link,
so it's not enough to grab mm in io_sq_thread_acquire_mm()
based just on the head.
Don't check req->needs_mm and do it always.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
io_do_iopoll() won't do anything with a request unless
req->iopoll_completed is set. So io_complete_rw_iopoll() has to set
it, otherwise io_do_iopoll() will poll a file again and again even
though the request of interest was completed long time ago.
Also, remove -EAGAIN check from io_issue_sqe() as it races with
the changed lines. The request will take the long way and be
resubmitted from io_iopoll*().
io_kiocb's result and iopoll_completed")
Fixes: bbde017a32 ("io_uring: add memory barrier to synchronize
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The module argument passed to snd_card_new() must be a valid non-NULL
pointer when the module support is enabled. Since ASoC driver passes
the argument from each snd_soc_card definition, one may forget to set
the owner field and lead to a NULL module easily.
For catching such an overlook, add a WARN_ON() in snd_card_new().
Also, put the card->module assignment in the ifdef block for a very
minor optimization.
Link: https://lore.kernel.org/r/20200624160300.21703-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have a Dell AIO, there is neither internal speaker nor internal
mic, only a multi-function audio jack on it.
Users reported that after freshly installing the OS and plug
a headset to the audio jack, the headset can't output sound. I
reproduced this bug, at that moment, the Input Source is as below:
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Headphone Mic' 'Headset Mic'
Item0: 'Headphone Mic'
That is because the patch_realtek will set this audio jack as mic_in
mode if Input Source's value is hp_mic.
If it is not fresh installing, this issue will not happen since the
systemd will run alsactl restore -f /var/lib/alsa/asound.state, this
will set the 'Input Source' according to history value.
If there is internal speaker or internal mic, this issue will not
happen since there is valid sink/source in the pulseaudio, the PA will
set the 'Input Source' according to active_port.
To fix this issue, change the parser function to let the hs_mic be
stored ahead of hp_mic.
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200625083833.11264-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently pointer phy0 is being dereferenced via the assignment of
phy on the call to phy_get_drvdata before phy0 is null checked, this
can lead to a null pointer dereference. Fix this by performing the
null check on phy0 before the call to phy_get_drvdata. Also replace
the phy0 == NULL check with the more usual !phy0 idiom.
Addresses-Coverity: ("Dereference before null check")
Fixes: e6f32efb1b ("phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200625124428.83564-1-colin.king@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The USB3 discovery used wrong indices when tunnel is discovered. It
should use TB_USB3_PATH_DOWN for path that flows downstream and
TB_USB3_PATH_UP when it flows upstream. This should not affect the
functionality but better to fix it.
Fixes: e6f8185857 ("thunderbolt: Add support for USB 3.x tunnels")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org # v5.6+
Implement call_cpuidle_s2idle() in analogy with call_cpuidle()
for the s2idle-specific idle state entry and invoke it from
cpuidle_idle_call() to make the s2idle-specific idle entry code
path look more similar to the "regular" idle entry one.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Chen Yu <yu.c.chen@intel.com>
This introduces an optimization based on xxx_sched_class addresses
in two hot scheduler functions: pick_next_task() and check_preempt_curr().
It is possible to compare pointers to sched classes to check, which
of them has a higher priority, instead of current iterations using
for_each_class().
One more result of the patch is that size of object file becomes a little
less (excluding added BUG_ON(), which goes in __init section):
$size kernel/sched/core.o
text data bss dec hex filename
before: 66446 18957 676 86079 1503f kernel/sched/core.o
after: 66398 18957 676 86031 1500f kernel/sched/core.o
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/711a9c4b-ff32-1136-b848-17c622d548f3@yandex.ru
Now that the sched_class descriptors are defined in order via the linker
script vmlinux.lds.h, there's no reason to have a "next" pointer to the
previous priroity structure. The order of the sturctures can be aligned as
an array, and used to index and find the next sched_class descriptor.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191219214558.845353593@goodmis.org
Now that the sched_class descriptors are defined by the linker script, and
this needs to be aware of the existance of stop_sched_class when SMP is
enabled or not, as it is used as the "highest" priority when defined. Move
the declaration of sched_class_highest to the same location in the linker
script that inserts stop_sched_class, and this will also make it easier to
see what should be defined as the highest class, as this linker script
location defines the priorities as well.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191219214558.682913590@goodmis.org
In order to make a micro optimization in pick_next_task(), the order of the
sched class descriptor address must be in the same order as their priority
to each other. That is:
&idle_sched_class < &fair_sched_class < &rt_sched_class <
&dl_sched_class < &stop_sched_class
In order to guarantee this order of the sched class descriptors, add each
one into their own data section and force the order in the linker script.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/157675913272.349305.8936736338884044103.stgit@localhost.localdomain
While rounding up CPUs via NMIs, its possible that a rounded up CPU
maybe holding a console port lock leading to kgdb master CPU stuck in
a deadlock during invocation of console write operations. A similar
deadlock could also be possible while using synchronous breakpoints.
So in order to avoid such a deadlock, set oops_in_progress to encourage
the console drivers to disregard their internal spin locks: in the
current calling context the risk of deadlock is a bigger problem than
risks due to re-entering the console driver. We operate directly on
oops_in_progress rather than using bust_spinlocks() because the calls
bust_spinlocks() makes on exit are not appropriate for this calling
context.
Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/1591264879-25920-4-git-send-email-sumit.garg@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Without this patch, eapol frames cannot be received in mesh
mode, when 802.1X should be used. Initially only a MGTK is
defined, which is found and set as rx->key, when there are
no other keys set. ieee80211_drop_unencrypted would then
drop these eapol frames, as they are data frames without
encryption and there exists some rx->key.
Fix this by differentiating between mesh eapol frames and
other data frames with existing rx->key. Allow mesh mesh
eapol frames only if they are for our vif address.
With this patch in-place, ieee80211_rx_h_mesh_fwding continues
after the ieee80211_drop_unencrypted check and notices, that
these eapol frames have to be delivered locally, as they should.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200625104214.50319-1-markus.theil@tu-ilmenau.de
[small code cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Charan Teja reported a 'use-after-free' in dmabuffs_dname [1], which
happens if the dma_buf_release() is called while the userspace is
accessing the dma_buf pseudo fs's dmabuffs_dname() in another process,
and dma_buf_release() releases the dmabuf object when the last reference
to the struct file goes away.
I discussed with Arnd Bergmann, and he suggested that rather than tying
the dma_buf_release() to the file_operations' release(), we can tie it to
the dentry_operations' d_release(), which will be called when the last ref
to the dentry is removed.
The path exercised by __fput() calls f_op->release() first, and then calls
dput, which eventually calls d_op->d_release().
In the 'normal' case, when no userspace access is happening via dma_buf
pseudo fs, there should be exactly one fd, file, dentry and inode, so
closing the fd will kill of everything right away.
In the presented case, the dentry's d_release() will be called only when
the dentry's last ref is released.
Therefore, lets move dma_buf_release() from fops->release() to
d_ops->d_release()
Many thanks to Arnd for his FS insights :)
[1]: https://lore.kernel.org/patchwork/patch/1238278/
Fixes: bb2bb90304 ("dma-buf: add DMA_BUF_SET_NAME ioctls")
Reported-by: syzbot+3643a18836bce555bff6@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> [5.3+]
Cc: Arnd Bergmann <arnd@arndb.de>
Reported-by: Charan Teja Reddy <charante@codeaurora.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Tested-by: Charan Teja Reddy <charante@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200611114418.19852-1-sumit.semwal@linaro.org
When using 802.1X over mesh networks, at first an ordinary
mesh peering is established, then the 802.1X EAPOL dialog
happens, afterwards an authenticated mesh peering exchange
(AMPE) happens, finally the peering is complete and we can
set the STA authorized flag.
As 802.1X is an intermediate step here and key material is
not yet exchanged for stations we have to skip mesh path lookup
for these EAPOL frames. Otherwise the already configure mesh
group encryption key would be used to send a mesh path request
which no one can decipher, because we didn't already establish
key material on both peers, like with SAE and directly using AMPE.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200617082637.22670-2-markus.theil@tu-ilmenau.de
[remove pointless braces, remove unnecessary local variable,
the list can only process one such frame (or its fragments)]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The initial control port tx status patch assumed, that
we have IEEE 802.11 frames, but actually ethernet frames
are stored in the ack skb. Fix this by checking for the
correct ethertype and skb protocol 802.3.
Also allow tx status reports for ETH_P_PREAUTH, as preauth
frames can also be send over the nl80211 control port.
Fixes: a7528198ad ("mac80211: support control port TX status reporting")
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20200622123542.173695-1-markus.theil@tu-ilmenau.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Address the scalability to support new generation Intel controller with
respect to readability and enhancement to new firmware download sequence
Signed-off-by: Kiran K <kiran.k@intel.com>
Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Add functionality to disable writing to MSRs from userspace. Writes can
still be allowed by supplying the allow_writes=on module parameter. The
kernel will be tainted so that it shows in oopses.
Having unfettered access to all MSRs on a system is and has always been
a disaster waiting to happen. Think performance counter MSRs, MSRs with
sticky or locked bits, MSRs making major system changes like loading
microcode, MTRRs, PAT configuration, TSC counter, security mitigations
MSRs, you name it.
This also destroys all the kernel's caching of MSR values for
performance, as the recent case with MSR_AMD64_LS_CFG showed.
Another example is writing MSRs by mistake by simply typing the wrong
MSR address. System freezes have been experienced that way.
In general, poking at MSRs under the kernel's feet is a bad bad idea.
So log writing to MSRs by default. Longer term, such writes will be
disabled by default.
If userspace still wants to do that, then proper interfaces should be
defined which are under the kernel's control and accesses to those MSRs
can be synchronized and sanitized properly.
[ Fix sparse warnings. ]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Link: https://lkml.kernel.org/r/20200612105026.GA22660@zn.tnic
csum_fold() in MIPS' asm/checksum.h is another source of sparse flooding
when building different networking source code.
The thing is that only half of __wsum <--> u32 casts inside the function
is forced, which is insufficient.
Add all necessary forced typecasting to stop floods and simplify actual
bug hunting.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS MMIO macros for byteswapping from/to hardware endianness are a bit
tricky because they use cpu_to_le{16,32,64}() in both directions.
This generates a lot of questions from sparse as __le{16,32,64} types
are 'restricted' and direct cast is forbidden in order to prevent messing
up the byteorder.
As MMIO ops are used in almost every single driver, this leads to console
flooding and complicates bug hunting.
We could fix it in a more proper way, i.e. separate from device /
to device byteswap macros and expand __BUILD_MEMORY_*(), but this seems
redundant and will produce code duplication.
Instead, just expand the existing *ioswab*() macros with forced
typecasting to stop floods.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
*readq() family operates with u64 arguments, so they need 64-bit
byteswaps.
Correct macros for Generic MIPS and IP-32 to match other machines'
implementations.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
To support Thunderbolt compatibility mode, synchronize
ec_response_usb_pd_control_v2 with the Chrome EC version, so that
we get the Thunderbolt related control fields and macros.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
