In current die(), the irq is disabled for __die() handle, not
including the possible panic() handling. Since the log in __die()
can take several hundreds ms, new irq might come and interrupt
current die().
If the process calling die() holds some critical resource, and some
other process scheduled later also needs it, then it would deadlock.
The first panic will not be executed.
So here disable irq for the whole flow of die().
Signed-off-by: Qiao Zhou <qiaozhou@asrmicro.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The lse implementation of atomic64_dec_if_positive uses the '+&' constraint,
but the '&' is redundant and confusing in this case, since early clobber
on a read/write operand is a strange concept.
Replace the constraint with '+'.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Casting a pointer to an integral type doesn't require a __force
attribute, because you'll need to cast back to a pointer in order to
dereference the thing anyway.
This patch removes the redundant __force cast from __range_ok.
Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Remove unnecessary static on local variable hst.
Such variable is initialized before being used,
on every execution path throughout the function.
The static has no benefit and, removing it reduces
the object file size.
This issue was detected using Coccinelle and the
following semantic patch:
@bad exists@
position p;
identifier x;
type T;
@@
static T x@p;
...
x = <+...x...+>
@@
identifier x;
expression e;
type T;
position p != bad.p;
@@
-static
T x@p;
... when != x
when strict
?x = e;
In the following log you can see the difference in the object file size.
This log is the output of the size command, before and after the code
change:
before:
text data bss dec hex filename
4029 2528 128 6685 1a1d drivers/bluetooth/btwilink.o
after:
text data bss dec hex filename
4007 2472 64 6543 198f drivers/bluetooth/btwilink.o
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Convert hci_ll to use hci_uart_unregister_device().
This simplifies the _remove() handler as well as fixes a
potential race condition on unload.
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabor.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Several drivers have the same (and incorrect) code in their
_remove() handler.
Coalesce this into a shared function.
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There's been numerous reported instances where BTUSB_QCA_ROME
bluetooth controllers stop functioning upon resume from suspend. These
devices seem to be losing power during suspend. Patch will detect a status
change on resume and perform a reset.
Signed-off-by: Leif Liddy <leif.linux@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
pm_runtime_disable() is called in the _close() handler.
Since we call the _close() handler on remove, there is no need to
call pm_runtime_disable() a second time.
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Only cancel any ongoing work after making sure, that no new work
can be scheduled. This fixes a race condition in the remove handler.
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Fixed this coding style erro
./drivers/bluetooth/btqca.c:84: ERROR: code indent should use tabs where possible
Signed-off-by: Joan Jani <igiann@hotmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
In case of no IRQ resource associated to the bcm_device, requesting
IRQ should return an error in order to not enable low power mgmt.
Signed-off-by: Loic Poulain <loic.poulain@gmail.com>
Reported-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Index should always be of the same file type as origin, except for
the case of a whiteout index. A whiteout index should only exist
if all lower aliases have been unlinked, which means that finding
a lower origin on lookup whose index is a whiteout should be treated
as a lookup error.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Directory index entries are going to be used for looking up
redirected upper dirs by lower dir fh when decoding an overlay
file handle of a merge dir.
Whiteout index entries are going to be used as an indication that
an exported overlay file handle should be treated as stale (i.e.
after unlink of the overlay inode).
We don't know the verification rules for directory and whiteout
index entries, because they have not been implemented yet, so fail
to mount overlay rw if those entries are found to avoid corrupting
an index that was created by a newer kernel.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
inode_doinit_with_dentry() in SELinux wants to read the upper inode's xattr
to get security label, and ovl_xattr_get() calls ovl_dentry_real(), which
depends on dentry->d_inode, but d_inode is null and not initialized yet at
this point resulting in an Oops.
Fix by getting the upperdentry info from the inode directly in this case.
Reported-by: Eryu Guan <eguan@redhat.com>
Fixes: 09d8b58673 ("ovl: move __upperdentry to ovl_inode")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We have space for exactly three characters for the index in "max7315_%d_base",
but as GCC points out having more would cause an string overflow:
arch/x86/platform/intel-mid/device_libs/platform_max7315.c: In function 'max7315_platform_data':
arch/x86/platform/intel-mid/device_libs/platform_max7315.c:41:26: error: '%d' directive writing between 1 and 11 bytes into a region of size 9 [-Werror=format-overflow=]
sprintf(base_pin_name, "max7315_%d_base", nr);
^~~~~~~~~~~~~~~~~
arch/x86/platform/intel-mid/device_libs/platform_max7315.c:41:26: note: directive argument in the range [-2147483647, 2147483647]
arch/x86/platform/intel-mid/device_libs/platform_max7315.c:41:3: note: 'sprintf' output between 15 and 25 bytes into a destination of size 17
sprintf(base_pin_name, "max7315_%d_base", nr);
This makes it use an snprintf() to truncate the string if that happened
rather than overflowing the stack. In practice, this is safe, because
there won't be a large number of max7315 devices in the systems, and
both the format and the length are defined by the firmware interface.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170719125310.2487451-9-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The x86 version of insb/insw/insl uses an inline assembly that does
not have the target buffer listed as an output. This can confuse
the compiler, leading it to think that a subsequent access of the
buffer is uninitialized:
drivers/net/wireless/wl3501_cs.c: In function ‘wl3501_mgmt_scan_confirm’:
drivers/net/wireless/wl3501_cs.c:665:9: error: ‘sig.status’ is used uninitialized in this function [-Werror=uninitialized]
drivers/net/wireless/wl3501_cs.c:668:12: error: ‘sig.cap_info’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/net/sb1000.c: In function 'sb1000_rx':
drivers/net/sb1000.c:775:9: error: 'st[0]' is used uninitialized in this function [-Werror=uninitialized]
drivers/net/sb1000.c:776:10: error: 'st[1]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/net/sb1000.c:784:11: error: 'st[1]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
I tried to mark the exact input buffer as an output here, but couldn't
figure it out. As suggested by Linus, marking all memory as clobbered
however is good enough too. For the outs operations, I also add the
memory clobber, to force the input to be written to local variables.
This is probably already guaranteed by the "asm volatile", but it can't
hurt to do this for symmetry.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: http://lkml.kernel.org/r/20170719125310.2487451-5-arnd@arndb.de
Link: https://lkml.org/lkml/2017/7/12/605
Signed-off-by: Ingo Molnar <mingo@kernel.org>
gcc-7.1.1 produces this warning:
arch/x86/math-emu/reg_add_sub.c: In function 'FPU_add':
arch/x86/math-emu/reg_add_sub.c:80:48: error: ?: using integer constants in boolean context [-Werror=int-in-bool-context]
This appears to be a bug in gcc-7.1.1, and I have reported it as
PR81484. The compiler suggests that code written as
if (a & b ? c : d)
is usually incorrect and should have been
if (a & (b ? c : d))
However, in this case, we correctly write
if ((a & b) ? c : d)
and should not get a warning for it.
This adds a dirty workaround for the problem, adding a comparison with
zero inside of the macro. The warning is currently disabled in the kernel,
so we may decide not to apply the patch, and instead wait for future gcc
releases to fix the problem. On the other hand, it seems to be the
only instance of this particular problem.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Bill Metzenthen <billm@melbpc.org.au>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170719125310.2487451-4-arnd@arndb.de
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81484
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When building the kernel with "make EXTRA_CFLAGS=...", this overrides
the "PARANOID" preprocessor macro defined in arch/x86/math-emu/Makefile,
and we run into a build warning:
arch/x86/math-emu/reg_compare.c: In function ‘compare_i_st_st’:
arch/x86/math-emu/reg_compare.c:254:6: error: ‘f’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
This fixes the implementation to work correctly even without the PARANOID
flag, and also fixes the Makefile to not use the EXTRA_CFLAGS variable
but instead use the ccflags-y variable in the Makefile that is meant
for this purpose.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Bill Metzenthen <billm@melbpc.org.au>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170719125310.2487451-3-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The intialization function checks for various failure scenarios, but
unfortunately the compiler gets a little confused about the possible
combinations, leading to a false-positive build warning when
-Wmaybe-uninitialized is set:
arch/x86/events/core.c: In function ‘init_hw_perf_events’:
arch/x86/events/core.c:264:3: warning: ‘reg_fail’ may be used uninitialized in this function [-Wmaybe-uninitialized]
arch/x86/events/core.c:264:3: warning: ‘val_fail’ may be used uninitialized in this function [-Wmaybe-uninitialized]
pr_err(FW_BUG "the BIOS has corrupted hw-PMU resources (MSR %x is %Lx)\n",
We can't actually run into this case, so this shuts up the warning
by initializing the variables to a known-invalid state.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170719125310.2487451-2-arnd@arndb.de
Link: https://patchwork.kernel.org/patch/9392595/
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Taking the modeset locks unconditionally isn't the greatest idea,
because atm that part is still broken and times out (and then atomic
keels over). And there's really no reason to do so, the old code
didn't do that either.
To make the patch a bit simpler let's also nuke 2 cases that are only
around for the old mmioflip paths. Atomic nonblocking workers will not
die (minus bugs) when a gpu reset happens.
And of course this doesn't fix any of the gpu reset vs. modeset
deadlock fun, but it at least stop modern CI machines from keeling
over all over the place for no reason at all.
And we still have the explicit testcases to run the fake gpu reset, so
coverage isn't that much worse.
v2: Split out additional changes on top, restrict this to purely reducing
the critical section of modeset locks.
v2: Review from Maarten
- update comments
- don't oops when state is NULL in intel_finish_reset, but try to at
least still drop locks properly. The hw is going to be toast anyway.
Fixes: 7397489399 ("drm/i915: Fix modeset handling during gpu reset, v5.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170719125502.25696-3-daniel.vetter@ffwll.ch
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Initial support for namespaces, using setns to access files in
namespaces, grabbing their build-ids, etc. We still need to work
more to deal with namespaces that vanish before we can get the
needed data to do analysis, but this should be as good as what is
in bcc now (Krister Johansen)
- Add header record types to pipe-mode, now this command:
$ perf record -o - -e cycles sleep 1 | perf report --stdio --header
Will show the same as in non-pipe mode, i.e. involving a perf.data
file (David Carrillo-Cisneros)
- Implement a visual marker for fused x86 instructions in the annotate
TUI browser, available now in 'perf report', more work needed to have
it available as well in 'perf top' (Jin Yao)
Further explanation from one of Jin's patches:
│ ┌──cmpl $0x0,argp_program_version_hook
81.93 │ ├──je 20
│ │ lock cmpxchg %esi,0x38a9a4(%rip)
│ │↓ jne 29
│ │↓ jmp 43
11.47 │20:└─→cmpxch %esi,0x38a999(%rip)
That means the cmpl+je is a fused instruction pair and they should be
considered together.
- Record the branch type and then show statistics and info about
in callchain entries (Jin Yao)
Example from one of Jin's patches:
# perf record -g -j any,save_type
# perf report --branch-history --stdio --no-children
38.50% div.c:45 [.] main div
|
---main div.c:42 (RET CROSS_2M cycles:2)
compute_flag div.c:28 (cycles:2)
compute_flag div.c:27 (RET CROSS_2M cycles:1)
rand rand.c:28 (cycles:1)
rand rand.c:28 (RET CROSS_2M cycles:1)
__random random.c:298 (cycles:1)
__random random.c:297 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (RET CROSS_2M cycles:9)
- Beautify the fcntl syscall, which is an interesting one in the sense
that infrastructure had to be put in place to change the formatters of
some arguments according to the value in a previous one, i.e. cmd
dictates how arg and the syscall return will be formatted.
(Arnaldo Carvalho de Melo
Infrastructure changes:
- 'perf test attr' fixes (Jiri Olsa)
Vendor events changes:
- Add POWER9 PMU events Sukadev (Bhattiprolu)
- Support additional POWER8+ PVR in PMU mapfile (Shriya)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
One of the rarely executed code pathes in check_timer() calls
unmask_ioapic_irq() passing irq_get_chip_data(0) as argument.
That's wrong as unmask_ioapic_irq() expects a pointer to the irq data of
interrupt 0. irq_get_chip_data(0) returns NULL, so the following
dereference in unmask_ioapic_irq() causes a kernel panic.
The issue went unnoticed in the first place because irq_get_chip_data()
returns a void pointer so the compiler cannot do a type check on the
argument. The code path was added for machines with broken configuration,
but it seems that those machines are either not running current kernels or
simply do not longer exist.
Hand in irq_get_irq_data(0) as argument which provides the correct data.
[ tglx: Rewrote changelog ]
Fixes: 4467715a44 ("x86/irq: Move irq_cfg.irq_2_pin into io_apic.c")
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1500369644-45767-1-git-send-email-kkamagui@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The bus_irq argument of mp_override_legacy_irq() is used as the index into
the isa_irq_to_gsi[] array. The bus_irq argument originates from
ACPI_MADT_TYPE_IO_APIC and ACPI_MADT_TYPE_INTERRUPT items in the ACPI
tables, but is nowhere sanity checked.
That allows broken or malicious ACPI tables to overwrite memory, which
might cause malfunction, panic or arbitrary code execution.
Add a sanity check and emit a warning when that triggers.
[ tglx: Added warning and rewrote changelog ]
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: security@kernel.org
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently we may process up/down message transactions containing
uninitialized data. This can happen if there was an error during the
reception of any message in the transaction, but we happened to receive
the last message correctly with the end-of-message flag set.
To avoid this abort the reception of the transaction when the first
error is detected, rejecting any messages until a message with the
start-of-message flag is received (which will start a new transaction).
This is also what the DP 1.4 spec 2.11.8.2 calls for in this case.
In addtion this also prevents receiving bogus transactions without the
first message with the the start-of-message flag set.
v2:
- unchanged
v3:
- git add the part that actually skips messages after an error in
drm_dp_sideband_msg_build()
Cc: Dave Airlie <airlied@redhat.com>
Cc: Lyude <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170719134632.13366-1-imre.deak@intel.com
Vince Weaver reported:
> I was tracking down some regressions in my perf_event_test testsuite.
> Some of the tests broke in the 4.11-rc1 timeframe.
>
> I've bisected one of them, this report is about
> tests/overflow/simul_oneshot_group_overflow
> This test creates an event group containing two sampling events, set
> to overflow to a signal handler (which disables and then refreshes the
> event).
>
> On a good kernel you get the following:
> Event perf::instructions with period 1000000
> Event perf::instructions with period 2000000
> fd 3 overflows: 946 (perf::instructions/1000000)
> fd 4 overflows: 473 (perf::instructions/2000000)
> Ending counts:
> Count 0: 946379875
> Count 1: 946365218
>
> With the broken kernels you get:
> Event perf::instructions with period 1000000
> Event perf::instructions with period 2000000
> fd 3 overflows: 938 (perf::instructions/1000000)
> fd 4 overflows: 318 (perf::instructions/2000000)
> Ending counts:
> Count 0: 946373080
> Count 1: 653373058
The root cause of the bug is that the following commit:
487f05e18a ("perf/core: Optimize event rescheduling on active contexts")
erronously assumed that event's 'pinned' setting determines whether the
event belongs to a pinned group or not, but in fact, it's the group
leader's pinned state that matters.
This was discovered by Vince in the test case described above, where two instruction
counters are grouped, the group leader is pinned, but the other event is not;
in the regressed case the counters were off by 33% (the difference between events'
periods), but should be the same within the error margin.
Fix the problem by looking at the group leader's pinning.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 487f05e18a ("perf/core: Optimize event rescheduling on active contexts")
Link: http://lkml.kernel.org/r/87lgnmvw7h.fsf@ashishki-desk.ger.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In some cases, offset can overflow and can cause an infinite loop in
ip6_find_1stfragopt(). Make it unsigned int to prevent the overflow, and
cap it at IPV6_MAXPLEN, since packets larger than that should be invalid.
This problem has been here since before the beginning of git history.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The array data is only populated with valid information from userspace
if cmd != SIOCDEVPRIVATE, other cases the array contains garbage on
the stack. The subsequent switch statement acts on a subcommand in
data[0] which could be any garbage value if cmd is SIOCDEVPRIVATE which
seems incorrect to me. Instead, just return EOPNOTSUPP for the case
where cmd == SIOCDEVPRIVATE to avoid this issue.
As a side note, I suspect that the original intention of the code
was for this ioctl to work just for cmd == SIOCDEVPRIVATE (and the
current logic is reversed). However, I don't wont to change the current
semantics in case any userspace code relies on this existing behaviour.
Detected by CoverityScan, CID#139647 ("Uninitialized scalar variable")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit cd8966e75e.
The duplicate CHANGEADDR event message is sent regardless of link
status whereas the setlink changes only generate a notification when
the link is up. Not sending a notification when the link is down breaks
dhcpcd which only processes hwaddr changes when the link is down.
Fixes reported regression:
https://bugzilla.kernel.org/show_bug.cgi?id=196355
Reported-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit f39908d3b1 ('net: dsa: mv88e6xxx: Set the CMODE for mv88e6390
ports 9 & 10') added support for setting the CMODE for the 6390X family,
but only enabled it for 9290 and 6390 - and left out 6390X.
Fix support for setting the CMODE on 6390X also by assigning
mv88e6390x_port_set_cmode() to the .port_set_cmode function pointer in
mv88e6390x_ops too.
Fixes: f39908d3b1 ("net: dsa: mv88e6xxx: Set the CMODE for mv88e6390 ports 9 & 10")
Signed-off-by: Martin Hundebøll <mnhu@prevas.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger says:
====================
netvsc: lockdep and related fixes
These fix sparse and lockdep warnings from netvsc driver.
Targeting these at net-next since no actual related failures
have been observed in non-debug kernels.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The rndis functions are used when changing device state.
Therefore the references from network device to internal state
are protected by RTNL mutex.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Keep back pointer in the per-channel data structure to
avoid any possible RCU related issues when napi poll is
called but netvsc_device is in RCU limbo.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The netvsc_device structure should be accessed by rcu_dereference
in the send path. Change arguments to netvsc_send() to make
this easier to do correctly.
Remove no longer needed hv_device_to_netvsc_device.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rndis_filter_device_add function is called both in
probe context and RTNL context,and creates the netvsc_device
inner structure. It is easier to get the RTNL lock annotation
correct if it returns the object directly, rather than implicitly
by updating network device private data.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use device detach/attach to ensure that no packets are handed
to device during state changes. Call rndis_filter_open/close
directly as part of later VF related changes.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes the error unwind logic for incorrect number of queues.
If netif_set_real_num_XX_queues failed then rndis_filter_device_add
would have been called twice. Since input arguments are already
ranged checked this is a hypothetical only problem, not possible
in actual code.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a couple places RTNL is held, and the netvsc_device pointer
is acquired without annotation.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
