The order for calling i40iw_destroy_pble_pool is incorrect.
Also, add PBLE_CHUNK_MEM init state to track pble pool
creation and destruction.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the SynIC timer message delivery fails due to SINT message slot being
busy, there's no point to attempt starting the timer again until we're
notified of the slot being released by the guest (via EOM or EOI).
Even worse, when a oneshot timer fails to deliver its message, its
re-arming with an expiration time in the past leads to immediate retry
of the delivery, and so on, without ever letting the guest vcpu to run
and release the slot, which results in a livelock.
To avoid that, only start the timer when there's no timer message
pending delivery. When there is, meaning the slot is busy, the
processing will be restarted upon notification from the guest that the
slot is released.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
This can be reproduced by EPT=1, unrestricted_guest=N, emulate_invalid_state=Y
or EPT=0, the trace of kvm-unit-tests/taskswitch2.flat is like below, it tries
to emulate invalid guest state task-switch:
kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
kvm_emulate_insn: 42000:0:0f 0b (0x2)
kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
kvm_inj_exception: #UD (0x0)
kvm_entry: vcpu 0
kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
kvm_emulate_insn: 42000:0:0f 0b (0x2)
kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
kvm_inj_exception: #UD (0x0)
......................
It appears that the task-switch emulation updates rflags (and vm86
flag) only after the segments are loaded, causing vmx->emulation_required
to be set, when in fact invalid guest state emulation is not needed.
This patch fixes it by updating vmx->emulation_required after the
rflags (and vm86 flag) is updated in task-switch emulation.
Thanks Radim for moving the update to vmx__set_flags and adding Paolo's
suggestion for the check.
Suggested-by: Nadav Amit <nadav.amit@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Update the cpp include flags for compiling device tree dts files
to match the changes made to the kernel build process in
commit d5d332d3f7 ("devicetree: Move include prefixes from arch
to separate directory").
Cc: <stable@vger.kernel.org> # 4.12
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Commit eed4d47efe (ACPI / sleep: Ignore spurious SCI wakeups from
suspend-to-idle) introduced acpi_freeze_sync() whose purpose is to
flush all of the processing of possible wakeup events signaled via
the ACPI SCI. However, it doesn't flush the query workqueue used
by the EC driver, so the events generated by the EC may not be
processed timely which leads to issues (increased overhead at least,
lost events possibly).
To fix that introduce acpi_ec_flush_work() that will flush all of
the outstanding EC work and call it from acpi_freeze_sync().
Fixes: eed4d47efe (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The NVME standard mandates that the SN, MN, and FR fields of the Identify
Controller Data Structure be "ASCII strings". That means that they may
not contain 0-bytes, not even string terminators.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
[hch: fixed for the move of the serial field, updated description]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The NVMe target has no way to preserve controller serial
IDs across reboots which breaks udev scripts doing
SYMLINK+="dev/disk/by-id/nvme-$env{ID_SERIAL}-part%n.
Export the randomly generated serial number via configfs and allow
setting of a serial via configfs to mitigate this breakage.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The NVMe specification defines the serial number as:
"Serial Number (SN): Contains the serial number for the NVM subsystem
that is assigned by the vendor as an ASCII string. Refer to section
7.10 for unique identifier requirements. Refer to section 1.5 for ASCII
string requirements"
So move it from the controller to the subsystem, where it belongs.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The NVMe target's attribute files need an attr prefix in order to have
nvmetcli recognize them. Add this attribute.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Release resources in the correct order in order not to miss a
'put_device()' if 'nvme_dev_map()' fails.
Fixes: b00a726a9f ("NVMe: Don't unmap controller registers on reset")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch replaces the invalid nvme SGL kernel panic with a warning,
and returns an appropriate error. The warning will occur only on the
first occurance, and sgl details will be printed to help debug how the
request was allowed to form.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We always need to do non-equal comparisms on the native endian versions
to get the correct result.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If cpuhp_store_callbacks() is called for CPUHP_AP_ONLINE_DYN or
CPUHP_BP_PREPARE_DYN, which are the indicators for dynamically allocated
states, then cpuhp_store_callbacks() allocates a new dynamic state. The
first allocation in each range returns CPUHP_AP_ONLINE_DYN or
CPUHP_BP_PREPARE_DYN.
If cpuhp_remove_state() is invoked for one of these states, then there is
no protection against the allocation mechanism. So the removal, which
should clear the callbacks and the name, gets a new state assigned and
clears that one.
As a consequence the state which should be cleared stays initialized. A
consecutive CPU hotplug operation dereferences the state callbacks and
accesses either freed or reused memory, resulting in crashes.
Add a protection against this by checking the name argument for NULL. If
it's NULL it's a removal. If not, it's an allocation.
[ tglx: Added a comment and massaged changelog ]
Fixes: 5b7aa87e04 ("cpu/hotplug: Implement setup/removal interface")
Signed-off-by: Ethan Barnes <ethan.barnes@sandisk.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.or>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Sebastian Siewior <bigeasy@linutronix.d>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/DM2PR04MB398242FC7776D603D9F99C894A60@DM2PR04MB398.namprd04.prod.outlook.com
Add overlay __symbols__ properties to live tree when an overlay
is added to the live tree so that the symbols are available to
subsequent overlays.
Expected test result is new __symbols__ entries for labels from
the overlay after this commit.
Before this commit:
Console error message near end of unittest:
### dt-test ### FAIL of_unittest_overlay_high_level():2296 Adding overlay 'overlay_bad_symbol' failed
### dt-test ### end of unittest - 190 passed, 1 failed
The new unittest "fails" because the expected result of loading the
new overlay is an error instead of success.
$ # node hvac-medium-2 exists because the overlay loaded
$ # since the duplicate symbol was not detected
$ cd /proc/device-tree/testcase-data-2/substation@100/
$ ls
compatible hvac-medium-2 motor-8 reg
hvac-large-1 linux,phandle name status
hvac-medium-1 motor-1 phandle
$ cd /proc/device-tree/__symbols__/
$ ls
electric_1 lights_1 name rides_1 spin_ctrl_2
hvac_1 lights_2 retail_1 spin_ctrl_1
After this commit:
Previous console error message no longer occurs, but expected error
occurs:
OF: overlay: Failed to apply prop @/__symbols__/hvac_1
OF: overlay: apply failed '/__symbols__'
### dt-test ### end of unittest - 191 passed, 0 failed
$ # node hvac-medium-2 does not exist because the overlay
$ # properly failed to load due to the duplicate symbol
$ cd /proc/device-tree/testcase-data-2/substation@100/
$ ls
compatible hvac-medium-1 motor-1 name reg
hvac-large-1 linux,phandle motor-8 phandle status
$ cd /proc/device-tree/__symbols__/
$ ls
electric_1 lights_1 retail_1 ride_200_right spin_ctrl_2
hvac_1 lights_2 ride_200 rides_1
hvac_2 name ride_200_left spin_ctrl_1
$ cat ride_200; echo
/testcase-data-2/fairway-1/ride@200
$ cat ride_200_left ; echo
/testcase-data-2/fairway-1/ride@200/track@10
$ cat ride_200_right ; echo
/testcase-data-2/fairway-1/ride@200/track@20
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
ACPICA commit 8b14afac65d983610cc5387ede6d85ea5ee075be
The following ACPI table contains an invalid target node within the
Alias operator:
definition_block ("", "SSDT", 1, "Bug", "BugTable", 0x00001000)
{
Scope (_SB)
{
Device (DEV0)
{
Name (_ADR, 1)
Device (DEV1)
{
Alias (_ADR, _ADR)
}
}
}
}
If an ACPI table contains such an invalid target node in an Alias
operator, a segmentation fault will occur when the target node is
dereferenced within acpi_ex_create_alias. Add a check for such an invalid
target node in acpi_ex_create_alias and return AE_NULL_OBJECT as suggested
by @acpibob.
Link: https://github.com/acpica/acpica/commit/8b14afac
Signed-off-by: Alex James <theracermaster@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 182bdffc0644f568be614a6d4debd651e29ca587
They are all mechanisms used to verify if a table is qualified to be
installed and controlled by acpi_gbl_enable_table_validation, so combine them
together. By doing so, table duplication check is applied to the statically
loaded tables (however whether it is actually enabled is still determined
by acpi_gbl_enable_table_validation). Lv Zheng.
Link: https://github.com/acpica/acpica/commit/182bdffc
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 3d837b5d4b1033942b4d91c7d3801a09c3157918
acpi_gbl_verify_table_checksum is used to avoid validating (mapping) an entire
table in OS boot stage. 2nd "Reload" check in acpi_tb_install_standard_table()
is prepared for the same purpose. So this patch combines them together
using a renamed acpi_gbl_enable_table_validation flag. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/3d837b5d
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit d3c944f2cdc8c7e847b7942b1864f285189f7bce
Windows seems to allow arbitrary table signatures for Load/load_table
opcodes:
ACPI BIOS Error (bug): Table has invalid signature [PRAD] (0x44415250)
So this patch removes dynamic load signature checks. However we need to
find a way to avoid table loading against tables like MADT. This is not
covered by this commit.
This Windows behavior has been validated on link #1. An end user bug
report can also be found on link #2.
This patch also includes simple cleanup for static load signature check
code. Reported by Ye Xiaolong, Fixed by Lv Zheng.
Link: https://github.com/acpica/acpica/commit/d3c944f2
Link: https://github.com/acpica/acpica/pull/121 [#1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=118601 [#2]
Reported-by: Ye Xiaolong <xiaolong.ye@intel.com>
Reported-by: Olga Uhina <olga.uhina@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 73512384c9eb1e7f1b28d0a7372df26a3732f96b
To avoid caller to trigger unexpected warning messages (Link #1):
ACPI Warning: Table ffffffffbb461d20, Validation count is zero before decrement
Which is reported from acpi_tb_put_table(). When the table is validated, the
pointer must be non-zero. Thus the message is not suitable for invalidated
tables. This patch fixes the callee side based on this fact. Reported by
Cristian Aravena Romero, Fixed by Lv Zheng.
Link: https://github.com/acpica/acpica/commit/73512384
Link: https://bugzilla.kernel.org/show_bug.cgi?id=191221 [#1]
Reported-by: Cristian Aravena Romero <caravena@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 894e49ef22db354eb1685cdb6f5f991766351d3c
acpisrc now has capability to convert both the followings:
1. Form 1:
typedef struct/union foo { struct/union foo {
.... --> ...
} FOO; }
2. Form 2:
typedef struct/union foo FOO; --> typedef struct/union foo foo;
It becomes unable to handle the following:
3. Form3:
typedef struct/union foo { /* comment */
...
} FOO;
-->
strut/union foo { /* comment */
...
};
As:
1. The purpose of acpisrc is to convert formatted code (ACPICA coding
style) into linux coding style,
2. acpisrc is a very simple tool that doesn't fully handle C language.
This commit changes the definitions side in order not to regress and we
shall make "no comments in struct/union line" as a new ACPICA coding style
rule. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/894e49ef
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 9a252114197409290813bee570e9d53c22b99d32
This change allows compilation of code like the following:
definition_block (...)
{
External (ABCD.EFGH)
Device (ABCD)
{
Name (IJLK,0)
}
}
but does not allow compilation of code like the following:
definition_block (...)
{
External (ABCD)
Device (ABCD)
{
Name (EFGH,0)
}
}
Link: https://github.com/acpica/acpica/commit/9a252114
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Correct existing node name detection when overlay node name has
a unit-address.
Expected test result is overlay will update the nodes and properties
for /testcase-data-2/fairway-1/ride@100/ after this commit.
Before this commit:
Console error message near end of unittest:
OF: Duplicate name in fairway-1, renamed to "ride@100#1"
$ cd /proc/device-tree/testcase-data-2/fairway-1/
$ # extra node: ride@100#1
$ ls
#address-cells linux,phandle phandle ride@200
#size-cells name ride@100 status
compatible orientation ride@100#1
$ cd /proc/device-tree/testcase-data-2/fairway-1/ride@100/
$ ls track@30/incline-up
ls: track@30/incline-up: No such file or directory
$ ls track@40/incline-up
ls: track@40/incline-up: No such file or directory
After this commit:
Console error message no longer occurs
$ cd /proc/device-tree/testcase-data-2/fairway-1/
$ # no extra node: ride@100#1
$ ls
#address-cells compatible name phandle ride@200
#size-cells linux,phandle orientation ride@100 status
$ cd /proc/device-tree/testcase-data-2/fairway-1/ride@100/
$ ls track@30/incline-up
track@30/incline-up
$ ls track@40/incline-up
track@40/incline-up
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Add nodes and properties to overlay_base and overlay dts files to
test for
- incorrect existing node name detection when overlay node name
has a unit-address
- adding overlay __symbols__ properties to live tree when an
overlay is added to the live tree
The following console messages will appear near the end of unittest
until the code errors are corrected:
OF: Duplicate name in fairway-1, renamed to "ride@100#1"
### dt-test ### FAIL of_unittest_overlay_high_level():2296 Adding overlay 'overlay_bad_symbol' failed
### dt-test ### end of unittest - 190 passed, 1 failed
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The way how default DMA pool is exposed has changed and now we need to
use dedicated interface to work with it. This patch makes alloc/release
operations to use such interface. Since, default DMA pool is not
handled by generic code anymore we have to implement our own mmap
operation.
Tested-by: Andras Szemzo <sza@esh.hu>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Christoph noticed [1] that default DMA pool in current form overload
the DMA coherent infrastructure. In reply, Robin suggested [2] to
split the per-device vs. global pool interfaces, so allocation/release
from default DMA pool is driven by dma ops implementation.
This patch implements Robin's idea and provide interface to
allocate/release/mmap the default (aka global) DMA pool.
To make it clear that existing *_from_coherent routines work on
per-device pool rename them to *_from_dev_coherent.
[1] https://lkml.org/lkml/2017/7/7/370
[2] https://lkml.org/lkml/2017/7/7/431
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Andras Szemzo <sza@esh.hu>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The Asus Transformer T100CHI comes with a Bluetooth keyboard dock which
uses the same 0xff31 Asus vendor HUT page as other Asus keyboards.
This commit adds its device-id to hid-asus and fixes an issue in the
descriptor of the 0xff31 Usage, which together fixes the special keys
on this keyboard not working.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The touchpad code is only used with the T100TA touchpad which
measures 75.5 x 41.5 mm, add corresponding resolution info.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When adding the initial support I only looked at the maximum coordinates
but the Y axis is inverted, so I should have checked the minimum
coodinates which never reach 0 due to max_y being wrong, fix this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Instead of having hardcoded (#define-d) values use a struct describing
the various touchpad parameters. This is a preparation patch for
improving the T100TA touchpad support as well as for adding T100CHI
touchpad support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for the Asus T100 touchpad in multi-touch mode (rather
then mouse emulation mode). It turns out that the Asus T100 touchpad
is identical to the already supported i2c-hid Asus touchpads, so
adding support for it was easy.
The only significant difference is that the reported x-coordinates
range on the T100 touchpad is somewhat lower then the range on the
already supported touchpads.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Variable mode in method wacom_show_remote_mode() is defined as u8, thus
statement (mode >= 0) is always true and should be removed, simplifying
the logic.
Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
