This clock driver collection was specific to AT91 and only used in !DT cases.
All clocks and the clock trees for all Atmel SoCs are now described by drivers
using the common clock framework.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
This patch removes unused dt node of command line from Exynos3250-based
Rinato board because kernel use the command line from bootloader.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch adds new board dts file to support Samsung Monk board which
is based on Exynos3250 SoC and has different H/W configuration from
Rinato.
This dts file support following features:
- eMMC
- Main PMIC (Samsung S2MPS14)
- Interface PMIC (Maxim MAX77836, MUIC, fuel-gauge, charger)
- RTC of Exynos3250
- ADC of Exynos3250 with NTC thermistor
- I2S of Exynos3250
- TMU of Exynos3250
- Secure firmware for Exynos3250 secondary cpu boot
- Serial ports of Exynos3250
- gpio-key for power key
Signed-off-by: Youngjun Cho <yj44.cho@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The head.text section is intended to be run at early bootup
before any of the regular kernel mappings have been setup.
Parts of head.text may be freed back into the buddy allocator
due to TEXT_OFFSET so for security requirements this memory
must not be executable. The suspend/resume/hotplug code path
requires some of these head.S functions to run however which
means they need to be executable. Support these conflicting
requirements by moving the few head.text functions that need
to be executable to the text section which has the appropriate
page table permissions.
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In the arm64 arch_static_branch implementation we place an A64 NOP into
the instruction stream and log relevant details to a jump_entry in a
__jump_table section. Later this may be replaced with an immediate
branch without link to the code for the unlikely case.
At init time, the core calls arch_jump_label_transform_static to
initialise the NOPs. On x86 this involves inserting the optimal NOP for
a given microarchitecture, but on arm64 we only use the architectural
NOP, and hence replace each NOP with the exact same NOP. This is
somewhat pointless.
Additionally, at module load time we don't call jump_label_apply_nops to
patch the optimal NOPs in, unlike other architectures, but get away with
this because we only use the architectural NOP anyway. A later notifier
will patch NOPs with branches as required.
Similarly to x86 commit 11570da1c5 (x86/jump-label: Do not bother
updating NOPs if they are correct), we can avoid patching NOPs with
identical NOPs. Given that we only use a single NOP encoding, this means
we can NOP-out the body of arch_jump_label_transform_static entirely. As
the default __weak arch_jump_label_transform_static implementation
performs a patch, we must use an empty function to achieve this.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
OLD_CLK_AT91 & OLD_IRQ_AT91 were only selected by entries in Kconfig.non_dt
that are now gone. So we remove all this legacy stuff and select the proper
options in the SOC_ entries.
As USE_OF is now selected directly in arch/arm/Kconfig AT91 entry, we can
safely remove it everywhere in this file.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
As we always use Device Tree now, we can add the configuration here.
Also remove the condition for PINCTRL_AT91.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
This adds a node for the IR remote control receiver to the Amlogic
Meson DTS.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This reverts commit 85c8555ff0 ("KVM: check for !is_zero_pfn() in
kvm_is_mmio_pfn()") and renames the function to kvm_is_reserved_pfn.
The problem being addressed by the patch above was that some ARM code
based the memory mapping attributes of a pfn on the return value of
kvm_is_mmio_pfn(), whose name indeed suggests that such pfns should
be mapped as device memory.
However, kvm_is_mmio_pfn() doesn't do quite what it says on the tin,
and the existing non-ARM users were already using it in a way which
suggests that its name should probably have been 'kvm_is_reserved_pfn'
from the beginning, e.g., whether or not to call get_page/put_page on
it etc. This means that returning false for the zero page is a mistake
and the patch above should be reverted.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of using kvm_is_mmio_pfn() to decide whether a host region
should be stage 2 mapped with device attributes, add a new static
function kvm_is_device_pfn() that disregards RAM pages with the
reserved bit set, as those should usually not be mapped as device
memory.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running on a system with a GICv3, we currenly don't allow the guest
to access the system register interface of the GICv3. We do this by
clearing the ICC_SRE_EL2.Enable, which causes all guest accesses to
ICC_SRE_EL1 to trap to EL2 and causes all guest accesses to other ICC_
registers to cause an undefined exception in the guest.
However, we currently don't handle the trap of guest accesses to
ICC_SRE_EL1 and will spill out a warning. The trap just needs to handle
the access as RAZ/WI, and a guest that tries to prod this register and
set ICC_SRE_EL1.SRE=1, must read back the value (which Linux already
does) to see if it succeeded, and will thus observe that ICC_SRE_EL1.SRE
was not set.
Add the simple trap handler in the sorted table of the system registers.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
[ardb: added cp15 handling]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
omap_hsmmc only supports one slot. So slot id is always zero, and
slot id was never used in the callbacks anyway
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
omap_hsmmc supports only one slot per controller, see OMAP_MMC_MAX_SLOTS.
This unnecessary indirection leads to confusion in the omap_hsmmc driver.
For example the card_detect callback is not installed by platform code
but from the driver probe function. So it should be a field of
omap_hsmmc_host. But since it is declared under the platform slot while
the drivers struct omap_hsmmc_host has no slot abstraction, this looks
like a bug, especially when not familiar that this driver only supports
1 slot anyway.
Either we should add a slot abstraction to omap_hsmmc_host or remove
it from the platform data struct. Removed since slot multiplexing is
an un-implemented feature
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
these fields are never read, probably an unimplemented feature
or superseded by pm_runtime
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
platform data is built from omap2_hsmmc_info, remove all fields that
are never set in omap_hsmmc_info, hence never copied to platform data.
Note that the omap_hsmmc driver is not affected by this patch those
fields were completely unused.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
- omap mmc driver supports multiplexing, omap_mmc_hs doesn't
this leads to one of the major confusions in the omap_hsmmc driver
- platform data should be read-only for the driver
most callbacks are not set by the omap3 platform init code while still
required. So they are set from the driver probe function, which is against
the paradigm that platform-data should not be modified by the driver
typical examples are card_detect, read_only callbacks
un-bundling by searching for driver name \"omap_hsmmc in the
arch/arm folder. omap_hsmmc_platform_data is not initialized directly,
but from omap2_hsmmc_info, which is defined in a separate header file
not touched by this patch
hwmod includes platform headers to declare features of the platform. All
the declared features are prefixed OMAP_HSMMC. There is no need to
include platform header from hwmod other except for feature defines
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Only a few files really need that platform header. When later splitting
omap_mmc_platform_data into omap_mmc and omap_mmc_hs, those files
declaring an hs mmc platform data will have to change the platform
include, which is a good sanity check.
Also removing omap242x_init_mmc, which is not used anywhere, checked
with grep.
Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This adds the module loading prefix "crypto-" to the template lookup
as well.
For example, attempting to load 'vfat(blowfish)' via AF_ALG now correctly
includes the "crypto-" prefix at every level, correctly rejecting "vfat":
net-pf-38
algif-hash
crypto-vfat(blowfish)
crypto-vfat(blowfish)-all
crypto-vfat
Reported-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Every other architecture with permanent fixed addresses has
FIX_HOLE as the first entry. This seems to be designed as a
debugging aid but there are a couple of side effects of not
having FIX_HOLE:
- If the first fixed address is 0, fix_to_virt -> virt_to_fix
triggers a BUG_ON for the virtual address being equal to
FIXADDR_TOP
- fix_to_virt may return a value outside of FIXADDR_START
and FIXADDR_TOP which may look like a bug to a developer.
Match up with other architectures and make everything clearer
by adding FIX_HOLE.
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Rather than duplicate the ARM_AMBA Kconfig symbol in both 32-bit and
64-bit ARM architectures, move the common definition to drivers/amba
where dependent drivers will be located.
Signed-off-by: Thierry Reding <treding@nvidia.com>
There are currently 2 differents naming conventions used between the
existing Armada SoC DT files for pinctrl entries (*_pin(s): *-pin(s)
and pmx_*: pmx-*) with a vast majority of files using the former:
$ grep _pin arch/arm/boot/dts/armada-*.dts* | wc -l
155
$ grep pmx arch/arm/boot/dts/armada-*.dts* | wc -l
13
In fact, only some Armada XP files are using the second variant.
This patch normalizes those files (mainly ge0/1 entries) to use
the first variant.
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Link: https://lkml.kernel.org/r/00114c3169e1d93259ff4150ed46ee36eae16b1e.1416670812.git.arno@natisbad.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
struct bfin_serial_port contains structs circ_buf, timer_list, and
work_struct directly (not pointers). This means that these structures
have to be defined completely to be inlined in struct
bfin_serial_port.
So instead of struct declarations, define the structures by including
proper headers. They were pulled in by linux/serial_core.h or others
until now. But experimenting with circ_buf removal from serial_core,
struct circ_buf becomes undefined in bfin_serial:
In file included from arch/blackfin/kernel/debug-mmrs.c:21:0:
arch/blackfin/include/asm/bfin_serial.h:44:18: error: field 'rx_dma_buf' has incomplete type
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe writes:
usb: patches for v3.19 merge window
This time, a very pull request with 216 non-merge
commits. Most of the commits contained here are
sparse or coccinelle fixes ranging from missing
'static' to returning 0 in case of errors.
More importantly, we have the removal the now
unnecessary 'driver' argument to ->udc_stop().
DWC2 learned about Dual-Role builds. Users of
this IP can now have a single driver built for
host and device roles.
DWC3 got support for two new HW platforms: Exynos7
and AMD.
The Broadcom USB 3.0 Device Controller IP is now
supported and so is PLX USB338x, which means DWC3
has lost is badge as the only USB 3.0 peripheral
IP supported on Linux.
Thanks for Tony Lindgren's work, we can now have
a distro-like kernel where all MUSB glue layers
can be built into the same kernel (statically
or dynamically linked) and it'll work in PIO (DMA
will come probably on v3.20).
Other than these, the usual set of cleanups and
non-critical fixes.
Signed-off-by: Felipe Balbi <balbi@ti.com>
.exit.* sections may be subject to patching by the new alternatives
framework and so shouldn't be discarded at link-time. Without this patch,
such a section will result in the following linker error:
`.exit.text' referenced in section `.altinstructions' of
drivers/built-in.o: defined in discarded section `.exit.text' of
drivers/built-in.o
Signed-off-by: Will Deacon <will.deacon@arm.com>
The fixmap API was originally added for arm64 for
early_ioremap purposes. It can be used for other purposes too
so move the initialization from ioremap to somewhere more
generic. This makes it obvious where the fixmap is being set
up and allows for a cleaner implementation of __set_fixmap.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The hyp stub vectors are currently loaded using adr. This
instruction has a +/- 1MB range for the loading address. If
the alignment for sections is changed the address may be more
than 1MB away, resulting in reclocation errors. Switch to using
adrp for getting the address to ensure we aren't affected by the
location of the __hyp_stub_vectors.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
handle_arch_irq isn't actually text, it's just a function pointer.
It doesn't need to be stored in the text section and doing so
causes problesm if we ever want to make the kernel text read only.
Declare handle_arch_irq as a proper function pointer stored in
the data section.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
