mvebu watchdog driver changes for v3.15
- orion watchdog
- cleanup and extend driver to support Armada 370 and Armada XP
Depends:
- tags/irqchip-mvebu-fixes-3.14 (already pulled by tglx)
- both are based on v3.14-rc1
* tag 'mvebu-watchdog-3.15' of git://git.infradead.org/linux-mvebu:
watchdog: orion: Enable the build on ARCH_MVEBU
watchdog: orion: Add support for Armada 370 and Armada XP SoC
watchdog: orion: Add per-compatible watchdog start implementation
watchdog: orion: Add per-compatible clock initialization
watchdog: orion: Introduce per-compatible of_device_id data
watchdog: orion: Introduce an orion_watchdog device structure
watchdog: orion: Remove unneeded BRIDGE_CAUSE clear
watchdog: orion: Make RSTOUT register a separate resource
watchdog: orion: Handle the interrupt so it's properly acked
watchdog: orion: Make sure the watchdog is initially stopped
watchdog: orion: Remove unused macros
watchdog: orion: Use atomic access for shared registers
watchdog: orion: Add clock error handling
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A patch to break dependency of DaVinci NAND
driver with mach-davinci. Required for reuse
of driver on other platforms (keystone).
* tag 'davinci-for-v3.15/nand' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
While unwinding backtrace, stack overflow is possible. This stack
overflow can sometimes lead to data abort in system if the area after
stack is not mapped to physical memory.
To prevent this problem from happening, execute the instructions that
can cause a data abort in separate helper functions, where a check for
feasibility is made before reading each word from the stack.
Signed-off-by: Anurag Aggarwal <a.anurag@samsung.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch moves bios32 over to using the generic code for enabling PCI
resources. Since the core code takes care of bridge resources too, we
can also drop the explicit IO and MEMORY enabling for them in the arch
code.
A side-effect of this change is that we no longer explicitly enable
devices when running in PCI_PROBE_ONLY mode. This stays closer to the
meaning of the option and prevents us from trying to enable devices
without any assigned resources (the core code refuses to enable
resources without parents).
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Looking at perf profiles of multi-threaded hackbench runs, a significant
performance hit appears to manifest from the cmpxchg loop used to
implement the 32-bit atomic_add_unless function. This can be mitigated
by writing a direct implementation of __atomic_add_unless which doesn't
require iteration outside of the atomic operation.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Renames logical shift macros, 'push' and 'pull', defined in
arch/arm/include/asm/assembler.h, into 'lspush' and 'lspull'.
That eliminates name conflict between 'push' logical shift macro
and 'push' instruction mnemonic. That allows assembler.h to be
included in .S files that use 'push' instruction.
Suggested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Delete ARM's asm/system.h. It's the last holdout and should be got rid of.
This builds for defconfig, lpc32xx_defconfig, exynos_defconfig + XEN, the
previous changed to a Gemini system and an omap3 config with TI_DAVINCI_EMAC.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The pte_accessible macro can be used to identify page table entries
capable of being cached by a TLB. In principle, this differs from
pte_present, since PROT_NONE mappings are mapped using invalid entries
identified as present and ptes designated as `old' can use either
invalid entries or those with the access flag cleared (guaranteed not to
be in the TLB). However, there is a race to take care of, as described
in 2084140594 ("mm: fix TLB flush race between migration, and
change_protection_range"), between a page being migrated and mprotected
at the same time. In this case, we can check whether a TLB invalidation
is pending for the mm and if so, temporarily consider PROT_NONE mappings
as valid.
This patch implements a quick pte_accessible macro for ARM by simply
checking if the pte is valid/present depending on the mm. For classic
MMU, these checks are identical and will generate some false positives
for PROT_NONE mappings, but this is better than the current asm-generic
definition of ((void)(pte),1).
Finally, pte_present_user is moved to use pte_valid (and renamed
appropriately) since we don't care about cache flushing for faulting
mappings.
Acked-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
After a bunch of benchmarking on the interaction between dmb and pldw,
it turns out that issuing the pldw *after* the dmb instruction can
give modest performance gains (~3% atomic_add_return improvement on a
dual A15).
This patch adds prefetchw invocations to our barriered atomic operations
including cmpxchg, test_and_xxx and futexes.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Move the bcm2835 board file into the mach-bcm directory. This allows us
to get rid of the mach-bcm2835 directory with the associated Kconfig
and Makefile.
Signed-off-by: Markus Mayer <markus.mayer@linaro.org>
[swarren, adjust defconfig so ARCH_BCM2835 still gets enabled]
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
DT nodes should be named according to the type of object that they
represent rather than the identity. DT nodes that contain a reg
property should include a unit address in their name. Fix these issues.
Add clock-output-names properties to the nodes so that the clocks get
named something meaningful. This works around the fact that the fixed
clock driver names clocks after the short node name, i.e. not including
the unit address.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
The sdio1 interface pins are routed to an unpopulated daughter card
connector on the bcm28155-ap board. Thus there is no need to mark
this interface as enabled.
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Matt Porter <mporter@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Replace the "fake" clocks defined in the "bcm11351.dtsi" device tree
file with real definitions backed by the new BCM281xx clock driver.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Matt Porter <mporter@linaro.org>
Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
The PCIe driver has been fully clock aware for quite a while. Remove
the kexec code to enable the PCIe clock, since the PCIe driver will do
the right thing.
jac adds:
[arnd]: fixes a build error when KEXEC is enabled and KIRKWOOD_LEGACY is not
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
During this release cycle, we're adding the new Armada 375, 380, and 385
SoCs. We're also migrating DT kirkwood boards into mach-mvebu. The
kirkwood changes make the different SoCs in mach-mvebu/ depend on
MULTI_V7 or MULTI_V5 as appropriate.
We add this dependency to the new SoCs so that when the branches are
merged, everything is as it should be.
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The camera sensor will soon require regulators and clocks. Register
fixed regulators for its VAA and VDD power supplies and a fixed rate
clock for its master clock.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This file is unused since commit
79f08d9ed2 (ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too)
.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This cleanup series gets rid of <mach/timex.h> for platforms not using
ARCH_MULTIPLATFORM. (For multi-platform code it's already unused since
387798b (ARM: initial multiplatform support).)
To make this work some code out of arch/arm needed to be adapted. The
respective changes got acks by their maintainers to be taken via armsoc
(with Andrew Morton substituting for Alessandro Zummo as rtc maintainer).
Compared to the previous pull request there was another patch added that
fixes a (non-critical) regression on ixp4xx. Olof Johansson asked to not
squash this fix into the original commit to save him from the need to
reverify the series.
Conflicts:
arch/arm/mach-at91/at91sam9260.c
arch/arm/mach-at91/at91sam9261.c
arch/arm/mach-at91/at91sam9263.c
arch/arm/mach-at91/at91sam9rl.c
arch/arm/mach-mmp/time.c
arch/arm/mach-sa1100/time.c
CLKSRC_MMIO is needed on efm32 because the clocksource driver
(CLKSRC_EFM32) uses clocksource_mmio_init() and
clocksource_mmio_readl_up(). Since commit 09ca27579e (clocksource:
time-efm32: Select CLKSRC_MMIO) CLKSRC_EFM32 does the necessary select
itself and ARCH_EFM32 doesn't need to select it explicitly any more.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This file is unused since commit
e6d159cdf9 (ARM: 7890/1: v7-M: drop using mach/entry-macro.S)
which went into v3.14-rc1.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The A13 has 3 SPI controllers compatible with the one found in the A10. Add
them in the DT.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A10s has 3 SPI controllers compatible with the one found in the A10. Add
them in the DT.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A20 has 4 SPI controllers compatible with the one found in the A10. Add
them in the DT.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch adds USBH2 devicetree node of Phytec PCM970 RDK.
Additionally, adds fixed regulator to provide functionality
without dummy-regulator in the kernel.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This patch adds the missing (Universal serial bus) USB devicetree
nodes for i.MX27 CPUs.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes for ARM platforms. Most are fixes for DTS
files, mostly from DT conversion on OMAP which is still finding a few
issues here and there.
There's a couple of small stale code removal patches that we usually
queue for the next release instead, but they seemed harmless enough to
bring in now.
Also, a fix for backlight on some PXA platforms, and a cache
configuration fix for Tegra, etc"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer
ARM: tegra: only run PL310 init on systems with one
ARM: tegra: Add head numbers to display controllers
ARM: imx6: build pm-imx6q.c independently of CONFIG_PM
ARM: tegra: fix RTC0 alias for Cardhu
ARM: dove: dt: revert PMU interrupt controller node
Documentation: dt: OMAP: Update Overo/Tobi
ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
ARM: dts: omap3-tobi: Use the correct vendor prefix
ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo
ARM: OMAP2+: Remove legacy macros for zoom platforms
ARM: OMAP2+: Remove MACH_NOKIA_N800
ARM: dts: N900: add missing compatible property
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
ARM: OMAP1: nokia770: enable tahvo-usb
ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module
ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module
ARM: dts: omap3-gta04: Fix mmc1 properties.
ARM: dts: omap3-gta04: Fix 'aux' gpio key flags.
ARM: OMAP2+: add missing ARCH_HAS_OPP
...
This is needed to use SRC (= Sampling Rate Converter).
MSTP1017 is defined top of MSTPxxx list to avoid runtime error,
since it is parent clock of MSTP1031 - MSTP1022
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Now that the r8a7791 DT platforms use the common clock framework,
there's no need to manually create clock aliases for devices
instantiated through DT, as those devices will reference their clocks
directly in the device tree. Remove those aliases.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
