Merge b29cd0ea65 into eba7aec49d

Speedy is a serial communication bus that is typically used in
Exynos SoC devices for communicating with a PMIC. Implement
basic support for it, as well as add its first user - s2mps17 in
board-dreamlte.

Also, while at it, implement a simple readl function.

Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>

board/samsung/board-dreamlte.c

@@ -3,11 +3,20 @@
  * Copyright (c) 2022, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
  */
 #include <board.h>
+#include <stdint.h>
+#include <string.h>
 #include <drivers/framework.h>
 #include <lib/simplefb.h>
+#include <lib/debug.h>
+#include <soc/exynos8895.h>
+#include <drivers/samsung/exynos-speedy.h>
 
-#define DECON_F_BASE		0x12860000
-#define HW_SW_TRIG_CONTROL	0x70
+/* DECON Register MAP */
+#define HW_SW_TRIG_CONTROL		0x70
+
+/* MMIO MAP */
+#define DECON_F_BASE			0x12860000
+#define SPEEDY_BASE			0x15b50000
 
 void init_board_funcs(void *board)
 {
@@ -23,6 +32,94 @@ void init_board_funcs(void *board)
 	board_restruct->name = "DREAMLTE";
 }
 
+enum s2mps17_ldos {
+	S2MPS17_LDO2,
+	S2MPS17_LDO34,
+	S2MPS17_LDO35,
+	S2MPS17_END
+};
+
+struct s2mps17_data {
+	uint8_t	ldo_ctrl_value;
+	uint32_t ldo_voltage_value;
+};
+
+/* Slave addr = 0xCC */
+/* S2MPS17 Register MAP */
+#define S2MPS17_PMIC_REG_L2CTRL		0x3e
+#define S2MPS17_PMIC_REG_L34CTRL	0x5f
+#define S2MPS17_PMIC_REG_L35CTRL	0x60
+
+#define S2MPS17_BUCK_MIN1	300000
+#define S2MPS17_BUCK_MIN2	600000
+#define S2MPS17_LDO_MIN1	700000
+#define S2MPS17_LDO_MIN2	400000
+#define S2MPS17_LDO_MIN3	1800000
+#define S2MPS17_LDO_MIN4	300000
+
+#define S2MPS17_LDO_STEP1	12500
+#define S2MPS17_LDO_STEP2	25000
+
+#define S2MPS17_LDO_VSEL_MASK	0x3f
+#define S2MPS17_BUCK_VSEL_MASK	0xff
+
+#define S2MPS17_ENABLE_MASK	(3 << 6)
+
+#define S2MPS17_LDO2_VOLTAGE	2800000
+#define S2MPS17_LDO34_VOLTAGE	1850000
+#define S2MPS17_LDO35_VOLTAGE	3000000
+
+#define _LDO(macro)	S2MPS17_LDO##macro
+#define _REG(ctrl)	S2MPS17_PMIC_REG##ctrl
+#define _ldo_ops(num)	s2mps17_ldo_ops##num
+#define _TIME(macro)	S2MPS17_ENABLE_TIME##macro
+
+static void s2mps17_setup(void)
+{
+	int ret;
+	struct speedy_transaction s2mps17;
+
+	/* S2MPS17 configuration */
+	s2mps17.base = SPEEDY_BASE;
+	s2mps17.slave = 1;
+
+	/*
+	 * Define LDO control register values
+	 * Calculation formula: enable mask + (voltage to set - minimal voltage) / step value
+	 */
+	const struct s2mps17_data data[] = {
+		{
+			S2MPS17_PMIC_REG_L2CTRL, // vqmmc
+			S2MPS17_ENABLE_MASK + (S2MPS17_LDO2_VOLTAGE -
+					       S2MPS17_LDO_MIN3) / S2MPS17_LDO_STEP2
+		}, {
+			S2MPS17_PMIC_REG_L34CTRL, // tsp_io
+			S2MPS17_ENABLE_MASK + (S2MPS17_LDO34_VOLTAGE -
+					       S2MPS17_LDO_MIN1) / S2MPS17_LDO_STEP2
+		}, {
+			S2MPS17_PMIC_REG_L35CTRL, // tsp_avdd
+			S2MPS17_ENABLE_MASK + (S2MPS17_LDO35_VOLTAGE -
+					       S2MPS17_LDO_MIN3) / S2MPS17_LDO_STEP2
+		}
+	};
+
+	/* Go ahead and enable the LDOs */
+	for (int i = 0; i < S2MPS17_END; i++) {
+		s2mps17.offset = data[i].ldo_ctrl_value;
+		s2mps17.val = data[i].ldo_voltage_value;
+
+		ret = speedy_write(&s2mps17);
+		if (ret)
+			goto handle_err;
+	}
+
+	return;
+
+ handle_err:
+	printk(KERN_ERR, "s2mps17: err\n");
+	return;
+}
+
 // Early initialization
 int board_init(void)
 {
@@ -34,6 +131,8 @@ int board_init(void)
 // Late initialization
 int board_late_init(void)
 {
+	s2mps17_setup();
+
 	return 0;
 }
 

drivers/Makefile

@@ -1,2 +1,3 @@
 # the drivers registration framework
 lib-y += framework.o
+lib-y += samsung/exynos-speedy.o

drivers/samsung/exynos-speedy.c

@@ -0,0 +1,196 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2024 Markuss Broks <markuss.broks@gmail.com>
+ */
+#include <stdint.h>
+#include <string.h>
+#include <drivers/framework.h>
+#include <drivers/samsung/exynos-speedy.h>
+
+/* SPEEDY Register MAP */
+#define SPEEDY_CTRL					0x000
+#define SPEEDY_FIFO_CTRL				0x004
+#define SPEEDY_CMD					0x008
+#define SPEEDY_INT_ENABLE				0x00c
+#define SPEEDY_INT_STATUS				0x010
+#define SPEEDY_FIFO_STATUS				0x030
+#define SPEEDY_TX_DATA					0x034
+#define SPEEDY_RX_DATA					0x038
+#define SPEEDY_PACKET_GAP_TIME				0x044
+#define SPEEDY_TIMEOUT_COUNT				0x048
+#define SPEEDY_FIFO_DEBUG				0x100
+#define SPEEDY_CTRL_STATUS				0x104
+
+/* SPEEDY_CTRL Register bits */
+#define SPEEDY_ENABLE					(1 << 0)
+#define SPEEDY_TIMEOUT_CMD_DISABLE			(1 << 1)
+#define SPEEDY_TIMEOUT_STANDBY_DISABLE			(1 << 2)
+#define SPEEDY_TIMEOUT_DATA_DISABLE			(1 << 3)
+#define SPEEDY_ALWAYS_PULLUP_EN				(1 << 7)
+#define SPEEDY_DATA_WIDTH_8BIT				(0 << 8)
+#define SPEEDY_REMOTE_RESET_REQ				(1 << 30)
+#define SPEEDY_SW_RST					(1 << 31)
+
+/* SPEEDY_FIFO_CTRL Register bits */
+#define SPEEDY_RX_TRIGGER_LEVEL(x)			((x) << 0)
+#define SPEEDY_TX_TRIGGER_LEVEL(x)			((x) << 8)
+#define SPEEDY_FIFO_DEBUG_INDEX				(0 << 24)
+#define SPEEDY_FIFO_RESET				(1 << 31)
+
+/* SPEEDY_CMD Register bits */
+#define SPEEDY_BURST_LENGTH(x)				((x) << 0)
+#define SPEEDY_BURST_FIXED				(0 << 5)
+#define SPEEDY_BURST_INCR				(1 << 5)
+#define SPEEDY_BURST_EXTENSION				(2 << 5)
+#define SPEEDY_ACCESS_BURST				(0 << 19)
+#define SPEEDY_ACCESS_RANDOM				(1 << 19)
+#define SPEEDY_DIRECTION_READ				(0 << 20)
+#define SPEEDY_DIRECTION_WRITE				(1 << 20)
+
+/* SPEEDY_INT_ENABLE Register bits */
+#define SPEEDY_TRANSFER_DONE_EN				(1 << 0)
+#define SPEEDY_TIMEOUT_CMD_EN				(1 << 1)
+#define SPEEDY_TIMEOUT_STANDBY_EN			(1 << 2)
+#define SPEEDY_TIMEOUT_DATA_EN				(1 << 3)
+#define SPEEDY_FIFO_RX_ALMOST_FULL_EN			(1 << 8)
+#define SPEEDY_FIFO_TX_ALMOST_EMPTY_EN			(1 << 4)
+#define SPEEDY_RX_FIFO_INT_TRAILER_EN			(1 << 9)
+#define SPEEDY_RX_MODEBIT_ERR_EN			(1 << 16)
+#define SPEEDY_RX_GLITCH_ERR_EN				(1 << 17)
+#define SPEEDY_RX_ENDBIT_ERR_EN				(1 << 18)
+#define SPEEDY_TX_LINE_BUSY_ERR_EN			(1 << 20)
+#define SPEEDY_TX_STOPBIT_ERR_EN			(1 << 21)
+#define SPEEDY_REMOTE_RESET_REQ_EN			(1 << 31)
+
+/* SPEEDY_INT_STATUS Register bits */
+#define SPEEDY_TRANSFER_DONE				(1 << 0)
+#define SPEEDY_TIMEOUT_CMD				(1 << 1)
+#define SPEEDY_TIMEOUT_STANDBY				(1 << 2)
+#define SPEEDY_TIMEOUT_DATA				(1 << 3)
+#define SPEEDY_FIFO_TX_ALMOST_EMPTY			(1 << 4)
+#define SPEEDY_FIFO_RX_ALMOST_FULL			(1 << 8)
+#define SPEEDY_RX_FIFO_INT_TRAILER			(1 << 9)
+#define SPEEDY_RX_MODEBIT_ERR				(1 << 16)
+#define SPEEDY_RX_GLITCH_ERR				(1 << 17)
+#define SPEEDY_RX_ENDBIT_ERR				(1 << 18)
+#define SPEEDY_TX_LINE_BUSY_ERR				(1 << 20)
+#define SPEEDY_TX_STOPBIT_ERR				(1 << 21)
+#define SPEEDY_REMOTE_RESET_REQ_STAT			(1 << 31)
+
+/* SPEEDY_FIFO_STATUS Register bits */
+#define SPEEDY_VALID_DATA_CNT				(0 << 0)
+#define SPEEDY_FIFO_FULL				(1 << 5)
+#define SPEEDY_FIFO_EMPTY				(1 << 6)
+
+/* SPEEDY_PACKET_GAP_TIME Register bits */
+#define SPEEDY_FIFO_TX_ALMOST_EMPTY			(1 << 4)
+#define SPEEDY_FSM_INIT					(1 << 1)
+#define SPEEDY_FSM_TX_CMD				(1 << 2)
+#define SPEEDY_FSM_STANDBY				(1 << 3)
+#define SPEEDY_FSM_DATA					(1 << 4)
+#define SPEEDY_FSM_TIMEOUT				(1 << 5)
+#define SPEEDY_FSM_TRANS_DONE				(1 << 6)
+#define SPEEDY_FSM_IO_RX_STAT_MASK			(3 << 7)
+#define SPEEDY_FSM_IO_TX_IDLE				(1 << 9)
+#define SPEEDY_FSM_IO_TX_GET_PACKET			(1 << 10)
+#define SPEEDY_FSM_IO_TX_PACKET				(1 << 11)
+#define SPEEDY_FSM_IO_TX_DONE				(1 << 12)
+
+#define SPEEDY_RX_LENGTH(n)				((n) << 0)
+#define SPEEDY_TX_LENGTH(n)				((n) << 8)
+
+#define SPEEDY_SLAVE(x)					((x & 0xf) << 15)
+#define SPEEDY_ADDRESS(x)				((x & 0xff) << 7)
+
+static int speedy_fifo_reset(unsigned long base)
+{
+	writel(SPEEDY_FIFO_RESET, (void *)(base + SPEEDY_FIFO_CTRL));
+	/* TODO: Implement a proper delay func */
+	for (volatile int i = 0; i < 1000; i++);
+	return 0;
+}
+
+static int speedy_int_clear(unsigned long base)
+{
+	writel(0xFFFFFFFF, (void *)(base + SPEEDY_INT_STATUS));
+	/* TODO: Implement a proper delay func */
+	for (volatile int i = 0; i < 1000; i++);
+	return 0;
+}
+
+int speedy_read(struct speedy_transaction *tr)
+{
+	int ret = speedy_fifo_reset(tr->base);
+	if (ret)
+		return ret;
+
+	writel(SPEEDY_RX_LENGTH(1) | SPEEDY_TX_LENGTH(1),
+	       (void *)(tr->base + SPEEDY_FIFO_CTRL));
+
+	unsigned int cmd = SPEEDY_ACCESS_RANDOM | SPEEDY_DIRECTION_READ |
+			   SPEEDY_SLAVE(tr->slave) | SPEEDY_ADDRESS(tr->offset);
+
+	writel(SPEEDY_TRANSFER_DONE | SPEEDY_FIFO_RX_ALMOST_FULL_EN |
+	       SPEEDY_RX_FIFO_INT_TRAILER_EN | SPEEDY_RX_MODEBIT_ERR_EN |
+	       SPEEDY_RX_GLITCH_ERR_EN | SPEEDY_RX_ENDBIT_ERR_EN |
+	       SPEEDY_REMOTE_RESET_REQ_EN,
+	       (void *)(tr->base + SPEEDY_INT_ENABLE));
+
+	speedy_int_clear(tr->base);
+
+	writel(cmd, (void *)(tr->base + SPEEDY_CMD));
+
+	// Poll for completion
+	int timeout = 500000;
+	while (timeout-- > 0) {
+		unsigned int int_status;
+		int_status = readl((volatile uint32_t *)(tr->base +
+							 SPEEDY_INT_STATUS));
+		if (int_status & SPEEDY_TRANSFER_DONE) {
+			speedy_int_clear(tr->base);
+			tr->val = readl((volatile uint32_t *)
+					(tr->base + SPEEDY_RX_DATA));
+			return 0;
+		}
+	}
+
+	return -1;
+}
+
+int speedy_write(struct speedy_transaction *tr)
+{
+	int ret = speedy_fifo_reset(tr->base);
+	if (ret)
+		return ret;
+
+	writel(SPEEDY_RX_LENGTH(1) | SPEEDY_TX_LENGTH(1),
+	       (void *)(tr->base + SPEEDY_FIFO_CTRL));
+
+	unsigned int cmd = SPEEDY_ACCESS_RANDOM | SPEEDY_DIRECTION_WRITE |
+			   SPEEDY_SLAVE(tr->slave) | SPEEDY_ADDRESS(tr->offset);
+
+	writel(SPEEDY_TRANSFER_DONE_EN | SPEEDY_FIFO_TX_ALMOST_EMPTY_EN |
+	       SPEEDY_TX_LINE_BUSY_ERR_EN | SPEEDY_TX_STOPBIT_ERR_EN |
+	       SPEEDY_REMOTE_RESET_REQ_EN,
+	       (void *)(tr->base + SPEEDY_INT_ENABLE));
+
+	speedy_int_clear(tr->base);
+
+	writel(cmd, (void *)(tr->base + SPEEDY_CMD));
+	writel(tr->val, (void *)(tr->base + SPEEDY_TX_DATA));
+
+	// Poll for completion
+	int timeout = 500000;
+	while (timeout-- > 0) {
+		unsigned int int_status;
+		int_status = readl((volatile uint32_t *)(tr->base +
+							 SPEEDY_INT_STATUS));
+		if (int_status & SPEEDY_TRANSFER_DONE) {
+			speedy_int_clear(tr->base);
+			return 0;
+		}
+	}
+
+	return -1;
+}

include/drivers/samsung/exynos-speedy.h

@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024 Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2024 Markuss Broks <markuss.broks@gmail.com>
+ *
+ * Bindings for exynos-speedy
+ */
+
+#ifndef EXYNOS_SPEEDY_H_
+#define EXYNOS_SPEEDY_H_
+
+struct speedy_transaction {
+	unsigned long base;
+	unsigned int slave;
+	unsigned int offset;
+	unsigned int val;
+};
+
+extern int speedy_read(struct speedy_transaction *tr);
+extern int speedy_write(struct speedy_transaction *tr);
+
+#endif /* EXYNOS_SPEEDY_H_ */

lib/unic/string.c

@@ -216,3 +216,8 @@ void writel(unsigned int value, void* address)
 	volatile unsigned int* ptr = (volatile unsigned int*)address;
 	*ptr = value;
 }
+
+uint32_t readl(volatile uint32_t *addr)
+{
+	return *addr;
+}

lib/unic/string.h

@@ -7,6 +7,7 @@
 #define STRING_H_
 
 #include "stddef.h"
+#include "stdint.h"
 
 #define LBLOCKSIZE (sizeof(long))
 #define UNALIGNED(X) ((long)X & (LBLOCKSIZE - 1))
@@ -26,6 +27,7 @@ char *strchr (const char *s, int c);
 char *strrchr (const char *s, int c);
 long atol (const char *s);
 void writel (unsigned int value, void* address);
+uint32_t readl(volatile uint32_t *addr);
 
 // C-driven optimized functions
 void *memset (void *m, int c, size_t n);
@@ -37,6 +39,7 @@ void *memset (void *m, int c, size_t n);
 /* How many bytes are copied each iteration of the 4X unrolled loop.  */
 #define BIGBLOCKSIZE (sizeof(long) << 2)
 
+static void *__optimized_memcpy (void *dst0, const void *src0, size_t len0) __attribute__((unused));
 static void *__optimized_memcpy (void *dst0, const void *src0, size_t len0)
 {
 	char *dst = dst0;
@@ -63,9 +66,9 @@ static void *__optimized_memcpy (void *dst0, const void *src0, size_t len0)
 			len0 -= LBLOCKSIZE;
 		}
 
-	/* Pick up any residual with a byte copier.  */
-	dst = (char*)aligned_dst;
-	src = (char*)aligned_src;
+		/* Pick up any residual with a byte copier.  */
+		dst = (char*)aligned_dst;
+		src = (char*)aligned_src;
 	}
 
 	while (len0--)