u-boot

History

Breno Lima 3aa4b703b4 imx: imx6: Move gpr_init() function to soc.c Since the gpr_init() function is common for boards using MX6S, MX6DL, MX6D, MX6Q and MX6QP processors move it to the soc.c file. Signed-off-by: Breno Lima <breno.lima@nxp.com> Acked-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>		2017-08-28 09:48:53 +02:00
..
Kconfig	mx6: remove SYS_SOC from board Kconfig	2015-09-13 10:37:29 +02:00
MAINTAINERS	imx6: add Bachmann OT1200 board	2014-10-06 17:24:28 +02:00
Makefile	ot1200: add basic SPL support	2015-01-22 11:03:19 +01:00
mx6q_4x_mt41j128.cfg	ot1200: move ccgr and gpr init to c functions	2015-01-22 11:03:19 +01:00
ot1200_spl.c	mx6: ddr: Allow changing REFSEL and REFR fields	2016-09-06 18:22:48 +02:00
ot1200.c	imx: imx6: Move gpr_init() function to soc.c	2017-08-28 09:48:53 +02:00
README	imx6: add Bachmann OT1200 board	2014-10-06 17:24:28 +02:00

README

U-Boot for the Bachmann electronic GmbH OT1200 devices

There are two different versions of the base board, which differ
in the way ethernet is done. The variant detection is done during
runtime based on the address of the found phy.

- "mr" variant
FEC is connected directly to an ethernet switch (KSZ8895). The ethernet
port is always up and auto-negotiation is not possible.

- normal variant
FEC is connected to a normal phy and auto-negotiation is possible.


The variant name is part of the dtb file name loaded by u-boot. This
make is possible to boot the linux kernel and make use variant specific
devicetree (fixed-phy link).

In order to support different display resoltuions/sizes the OT1200 devices
are making use of EDID data stored in an i2c EEPROM.