06a57f656b
The U-Boot driver for the sun8i-emac was using some preliminary DT binding. Now since Linux got its own driver in v4.15 and our driver can now cope with both bindings, let's convert the DT nodes used for the Pine64+ board over to the new bindings used by the kernel. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
60 lines
1.3 KiB
Plaintext
60 lines
1.3 KiB
Plaintext
/ {
|
|
aliases {
|
|
ethernet0 = &emac;
|
|
};
|
|
|
|
soc {
|
|
syscon: syscon@1c00000 {
|
|
compatible = "allwinner,sun50i-a64-system-controller",
|
|
"syscon";
|
|
reg = <0x01c00000 0x1000>;
|
|
};
|
|
|
|
emac: ethernet@1c30000 {
|
|
compatible = "allwinner,sun50i-a64-emac";
|
|
syscon = <&syscon>;
|
|
reg = <0x01c30000 0x10000>;
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq";
|
|
resets = <&ccu RST_BUS_EMAC>;
|
|
reset-names = "stmmaceth";
|
|
clocks = <&ccu CLK_BUS_EMAC>;
|
|
clock-names = "stmmaceth";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rgmii_pins>;
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&ext_rgmii_phy>;
|
|
status = "okay";
|
|
|
|
mdio: mdio {
|
|
compatible = "snps,dwmac-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ext_rgmii_phy: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
rmii_pins: rmii_pins {
|
|
pins = "PD10", "PD11", "PD13", "PD14", "PD17",
|
|
"PD18", "PD19", "PD20", "PD22", "PD23";
|
|
function = "emac";
|
|
drive-strength = <40>;
|
|
};
|
|
|
|
rgmii_pins: rgmii_pins {
|
|
pins = "PD8", "PD9", "PD10", "PD11", "PD12",
|
|
"PD13", "PD15", "PD16", "PD17", "PD18",
|
|
"PD19", "PD20", "PD21", "PD22", "PD23";
|
|
function = "emac";
|
|
drive-strength = <40>;
|
|
};
|
|
};
|