u-boot/common/cmd_reiser.c
Heiko Schocher 566a494f59 [PCS440EP] upgrade the PCS440EP board:
- Show on the Status LEDs, some States of the board.
                - Get the MAC addresses from the EEProm
                - use PREBOOT
                - use the CF on the board.
                - check the U-Boot image in the Flash with a SHA1
                  checksum.
                - use dynamic TLB entries generation for the SDRAM

Signed-off-by: Heiko Schocher <hs@denx.de>
2007-06-22 19:11:54 +02:00

244 lines
5.9 KiB
C

/*
* (C) Copyright 2003 - 2004
* Sysgo Real-Time Solutions, AG <www.elinos.com>
* Pavel Bartusek <pba@sysgo.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
/*
* Reiserfs support
*/
#include <common.h>
#if (CONFIG_COMMANDS & CFG_CMD_REISER)
#include <config.h>
#include <command.h>
#include <image.h>
#include <linux/ctype.h>
#include <asm/byteorder.h>
#include <reiserfs.h>
#include <part.h>
#ifndef CONFIG_DOS_PARTITION
#error DOS partition support must be selected
#endif
/* #define REISER_DEBUG */
#ifdef REISER_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
int do_reiserls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
char *filename = "/";
int dev=0;
int part=1;
char *ep;
block_dev_desc_t *dev_desc=NULL;
int part_length;
if (argc < 3) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
dev = (int)simple_strtoul (argv[2], &ep, 16);
dev_desc = get_dev(argv[1],dev);
if (dev_desc == NULL) {
printf ("\n** Block device %s %d not supported\n", argv[1], dev);
return 1;
}
if (*ep) {
if (*ep != ':') {
puts ("\n** Invalid boot device, use `dev[:part]' **\n");
return 1;
}
part = (int)simple_strtoul(++ep, NULL, 16);
}
if (argc == 4) {
filename = argv[3];
}
PRINTF("Using device %s %d:%d, directory: %s\n", argv[1], dev, part, filename);
if ((part_length = reiserfs_set_blk_dev(dev_desc, part)) == 0) {
printf ("** Bad partition - %s %d:%d **\n", argv[1], dev, part);
return 1;
}
if (!reiserfs_mount(part_length)) {
printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n", argv[1], dev, part);
return 1;
}
if (reiserfs_ls (filename)) {
printf ("** Error reiserfs_ls() **\n");
return 1;
};
return 0;
}
U_BOOT_CMD(
reiserls, 4, 1, do_reiserls,
"reiserls- list files in a directory (default /)\n",
"<interface> <dev[:part]> [directory]\n"
" - list files from 'dev' on 'interface' in a 'directory'\n"
);
/******************************************************************************
* Reiserfs boot command intepreter. Derived from diskboot
*/
int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
char *filename = NULL;
char *ep;
int dev, part = 0;
ulong addr = 0, part_length, filelen;
disk_partition_t info;
block_dev_desc_t *dev_desc = NULL;
char buf [12];
unsigned long count;
char *addr_str;
switch (argc) {
case 3:
addr_str = getenv("loadaddr");
if (addr_str != NULL) {
addr = simple_strtoul (addr_str, NULL, 16);
} else {
addr = CFG_LOAD_ADDR;
}
filename = getenv ("bootfile");
count = 0;
break;
case 4:
addr = simple_strtoul (argv[3], NULL, 16);
filename = getenv ("bootfile");
count = 0;
break;
case 5:
addr = simple_strtoul (argv[3], NULL, 16);
filename = argv[4];
count = 0;
break;
case 6:
addr = simple_strtoul (argv[3], NULL, 16);
filename = argv[4];
count = simple_strtoul (argv[5], NULL, 16);
break;
default:
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
if (!filename) {
puts ("\n** No boot file defined **\n");
return 1;
}
dev = (int)simple_strtoul (argv[2], &ep, 16);
dev_desc = get_dev(argv[1],dev);
if (dev_desc==NULL) {
printf ("\n** Block device %s %d not supported\n", argv[1], dev);
return 1;
}
if (*ep) {
if (*ep != ':') {
puts ("\n** Invalid boot device, use `dev[:part]' **\n");
return 1;
}
part = (int)simple_strtoul(++ep, NULL, 16);
}
PRINTF("Using device %s%d, partition %d\n", argv[1], dev, part);
if (part != 0) {
if (get_partition_info (dev_desc, part, &info)) {
printf ("** Bad partition %d **\n", part);
return 1;
}
if (strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) {
printf ("\n** Invalid partition type \"%.32s\""
" (expect \"" BOOT_PART_TYPE "\")\n",
info.type);
return 1;
}
PRINTF ("\nLoading from block device %s device %d, partition %d: "
"Name: %.32s Type: %.32s File:%s\n",
argv[1], dev, part, info.name, info.type, filename);
} else {
PRINTF ("\nLoading from block device %s device %d, File:%s\n",
argv[1], dev, filename);
}
if ((part_length = reiserfs_set_blk_dev(dev_desc, part)) == 0) {
printf ("** Bad partition - %s %d:%d **\n", argv[1], dev, part);
return 1;
}
if (!reiserfs_mount(part_length)) {
printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n", argv[1], dev, part);
return 1;
}
filelen = reiserfs_open(filename);
if (filelen < 0) {
printf("** File not found %s\n", filename);
return 1;
}
if ((count < filelen) && (count != 0)) {
filelen = count;
}
if (reiserfs_read((char *)addr, filelen) != filelen) {
printf("\n** Unable to read \"%s\" from %s %d:%d **\n", filename, argv[1], dev, part);
return 1;
}
/* Loading ok, update default load address */
load_addr = addr;
printf ("\n%ld bytes read\n", filelen);
sprintf(buf, "%lX", filelen);
setenv("filesize", buf);
return filelen;
}
U_BOOT_CMD(
reiserload, 6, 0, do_reiserload,
"reiserload- load binary file from a Reiser filesystem\n",
"<interface> <dev[:part]> [addr] [filename] [bytes]\n"
" - load binary file 'filename' from 'dev' on 'interface'\n"
" to address 'addr' from dos filesystem\n"
);
#endif /* CONFIG_COMMANDS & CFG_CMD_REISER */