83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
854 lines
22 KiB
C
854 lines
22 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2008,2010 Freescale Semiconductor, Inc.
|
|
* Dave Liu <daveliu@freescale.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <console.h>
|
|
#include <asm/io.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <malloc.h>
|
|
#include <libata.h>
|
|
#include <fis.h>
|
|
#include <sata.h>
|
|
#include "fsl_sata.h"
|
|
|
|
#ifndef CONFIG_SYS_SATA1_FLAGS
|
|
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
|
|
#endif
|
|
#ifndef CONFIG_SYS_SATA2_FLAGS
|
|
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
|
|
#endif
|
|
|
|
static struct fsl_sata_info fsl_sata_info[] = {
|
|
#ifdef CONFIG_SATA1
|
|
{CONFIG_SYS_SATA1, CONFIG_SYS_SATA1_FLAGS},
|
|
#else
|
|
{0, 0},
|
|
#endif
|
|
#ifdef CONFIG_SATA2
|
|
{CONFIG_SYS_SATA2, CONFIG_SYS_SATA2_FLAGS},
|
|
#else
|
|
{0, 0},
|
|
#endif
|
|
};
|
|
|
|
static inline void sdelay(unsigned long sec)
|
|
{
|
|
unsigned long i;
|
|
for (i = 0; i < sec; i++)
|
|
mdelay(1000);
|
|
}
|
|
|
|
static void fsl_sata_dump_sfis(struct sata_fis_d2h *s)
|
|
{
|
|
printf("Status FIS dump:\n\r");
|
|
printf("fis_type: %02x\n\r", s->fis_type);
|
|
printf("pm_port_i: %02x\n\r", s->pm_port_i);
|
|
printf("status: %02x\n\r", s->status);
|
|
printf("error: %02x\n\r", s->error);
|
|
printf("lba_low: %02x\n\r", s->lba_low);
|
|
printf("lba_mid: %02x\n\r", s->lba_mid);
|
|
printf("lba_high: %02x\n\r", s->lba_high);
|
|
printf("device: %02x\n\r", s->device);
|
|
printf("lba_low_exp: %02x\n\r", s->lba_low_exp);
|
|
printf("lba_mid_exp: %02x\n\r", s->lba_mid_exp);
|
|
printf("lba_high_exp: %02x\n\r", s->lba_high_exp);
|
|
printf("res1: %02x\n\r", s->res1);
|
|
printf("sector_count: %02x\n\r", s->sector_count);
|
|
printf("sector_count_exp: %02x\n\r", s->sector_count_exp);
|
|
}
|
|
|
|
static int ata_wait_register(unsigned __iomem *addr, u32 mask,
|
|
u32 val, u32 timeout_msec)
|
|
{
|
|
int i;
|
|
u32 temp;
|
|
|
|
for (i = 0; (((temp = in_le32(addr)) & mask) != val)
|
|
&& i < timeout_msec; i++)
|
|
mdelay(1);
|
|
return (i < timeout_msec) ? 0 : -1;
|
|
}
|
|
|
|
int init_sata(int dev)
|
|
{
|
|
u32 length, align;
|
|
cmd_hdr_tbl_t *cmd_hdr;
|
|
u32 cda;
|
|
u32 val32;
|
|
fsl_sata_reg_t __iomem *reg;
|
|
u32 sig;
|
|
int i;
|
|
fsl_sata_t *sata;
|
|
|
|
if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
|
|
printf("the sata index %d is out of ranges\n\r", dev);
|
|
return -1;
|
|
}
|
|
|
|
#ifdef CONFIG_MPC85xx
|
|
if ((dev == 0) && (!is_serdes_configured(SATA1))) {
|
|
printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev);
|
|
return -1;
|
|
}
|
|
if ((dev == 1) && (!is_serdes_configured(SATA2))) {
|
|
printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev);
|
|
return -1;
|
|
}
|
|
#endif
|
|
|
|
/* Allocate SATA device driver struct */
|
|
sata = (fsl_sata_t *)malloc(sizeof(fsl_sata_t));
|
|
if (!sata) {
|
|
printf("alloc the sata device struct failed\n\r");
|
|
return -1;
|
|
}
|
|
/* Zero all of the device driver struct */
|
|
memset((void *)sata, 0, sizeof(fsl_sata_t));
|
|
|
|
/* Save the private struct to block device struct */
|
|
sata_dev_desc[dev].priv = (void *)sata;
|
|
|
|
snprintf(sata->name, 12, "SATA%d", dev);
|
|
|
|
/* Set the controller register base address to device struct */
|
|
reg = (fsl_sata_reg_t *)(fsl_sata_info[dev].sata_reg_base);
|
|
sata->reg_base = reg;
|
|
|
|
/* Allocate the command header table, 4 bytes aligned */
|
|
length = sizeof(struct cmd_hdr_tbl);
|
|
align = SATA_HC_CMD_HDR_TBL_ALIGN;
|
|
sata->cmd_hdr_tbl_offset = (void *)malloc(length + align);
|
|
if (!sata->cmd_hdr_tbl_offset) {
|
|
printf("alloc the command header failed\n\r");
|
|
return -1;
|
|
}
|
|
|
|
cmd_hdr = (cmd_hdr_tbl_t *)(((u32)sata->cmd_hdr_tbl_offset + align)
|
|
& ~(align - 1));
|
|
sata->cmd_hdr = cmd_hdr;
|
|
|
|
/* Zero all of the command header table */
|
|
memset((void *)sata->cmd_hdr_tbl_offset, 0, length + align);
|
|
|
|
/* Allocate command descriptor for all command */
|
|
length = sizeof(struct cmd_desc) * SATA_HC_MAX_CMD;
|
|
align = SATA_HC_CMD_DESC_ALIGN;
|
|
sata->cmd_desc_offset = (void *)malloc(length + align);
|
|
if (!sata->cmd_desc_offset) {
|
|
printf("alloc the command descriptor failed\n\r");
|
|
return -1;
|
|
}
|
|
sata->cmd_desc = (cmd_desc_t *)(((u32)sata->cmd_desc_offset + align)
|
|
& ~(align - 1));
|
|
/* Zero all of command descriptor */
|
|
memset((void *)sata->cmd_desc_offset, 0, length + align);
|
|
|
|
/* Link the command descriptor to command header */
|
|
for (i = 0; i < SATA_HC_MAX_CMD; i++) {
|
|
cda = ((u32)sata->cmd_desc + SATA_HC_CMD_DESC_SIZE * i)
|
|
& ~(CMD_HDR_CDA_ALIGN - 1);
|
|
cmd_hdr->cmd_slot[i].cda = cpu_to_le32(cda);
|
|
}
|
|
|
|
/* To have safe state, force the controller offline */
|
|
val32 = in_le32(®->hcontrol);
|
|
val32 &= ~HCONTROL_ONOFF;
|
|
val32 |= HCONTROL_FORCE_OFFLINE;
|
|
out_le32(®->hcontrol, val32);
|
|
|
|
/* Wait the controller offline */
|
|
ata_wait_register(®->hstatus, HSTATUS_ONOFF, 0, 1000);
|
|
|
|
/* Set the command header base address to CHBA register to tell DMA */
|
|
out_le32(®->chba, (u32)cmd_hdr & ~0x3);
|
|
|
|
/* Snoop for the command header */
|
|
val32 = in_le32(®->hcontrol);
|
|
val32 |= HCONTROL_HDR_SNOOP;
|
|
out_le32(®->hcontrol, val32);
|
|
|
|
/* Disable all of interrupts */
|
|
val32 = in_le32(®->hcontrol);
|
|
val32 &= ~HCONTROL_INT_EN_ALL;
|
|
out_le32(®->hcontrol, val32);
|
|
|
|
/* Clear all of interrupts */
|
|
val32 = in_le32(®->hstatus);
|
|
out_le32(®->hstatus, val32);
|
|
|
|
/* Set the ICC, no interrupt coalescing */
|
|
out_le32(®->icc, 0x01000000);
|
|
|
|
/* No PM attatched, the SATA device direct connect */
|
|
out_le32(®->cqpmp, 0);
|
|
|
|
/* Clear SError register */
|
|
val32 = in_le32(®->serror);
|
|
out_le32(®->serror, val32);
|
|
|
|
/* Clear CER register */
|
|
val32 = in_le32(®->cer);
|
|
out_le32(®->cer, val32);
|
|
|
|
/* Clear DER register */
|
|
val32 = in_le32(®->der);
|
|
out_le32(®->der, val32);
|
|
|
|
/* No device detection or initialization action requested */
|
|
out_le32(®->scontrol, 0x00000300);
|
|
|
|
/* Configure the transport layer, default value */
|
|
out_le32(®->transcfg, 0x08000016);
|
|
|
|
/* Configure the link layer, default value */
|
|
out_le32(®->linkcfg, 0x0000ff34);
|
|
|
|
/* Bring the controller online */
|
|
val32 = in_le32(®->hcontrol);
|
|
val32 |= HCONTROL_ONOFF;
|
|
out_le32(®->hcontrol, val32);
|
|
|
|
mdelay(100);
|
|
|
|
/* print sata device name */
|
|
if (!dev)
|
|
printf("%s ", sata->name);
|
|
else
|
|
printf(" %s ", sata->name);
|
|
|
|
/* Wait PHY RDY signal changed for 500ms */
|
|
ata_wait_register(®->hstatus, HSTATUS_PHY_RDY,
|
|
HSTATUS_PHY_RDY, 500);
|
|
|
|
/* Check PHYRDY */
|
|
val32 = in_le32(®->hstatus);
|
|
if (val32 & HSTATUS_PHY_RDY) {
|
|
sata->link = 1;
|
|
} else {
|
|
sata->link = 0;
|
|
printf("(No RDY)\n\r");
|
|
return -1;
|
|
}
|
|
|
|
/* Wait for signature updated, which is 1st D2H */
|
|
ata_wait_register(®->hstatus, HSTATUS_SIGNATURE,
|
|
HSTATUS_SIGNATURE, 10000);
|
|
|
|
if (val32 & HSTATUS_SIGNATURE) {
|
|
sig = in_le32(®->sig);
|
|
debug("Signature updated, the sig =%08x\n\r", sig);
|
|
sata->ata_device_type = ata_dev_classify(sig);
|
|
}
|
|
|
|
/* Check the speed */
|
|
val32 = in_le32(®->sstatus);
|
|
if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN1)
|
|
printf("(1.5 Gbps)\n\r");
|
|
else if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN2)
|
|
printf("(3 Gbps)\n\r");
|
|
|
|
return 0;
|
|
}
|
|
|
|
int reset_sata(int dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void fsl_sata_dump_regs(fsl_sata_reg_t __iomem *reg)
|
|
{
|
|
printf("\n\rSATA: %08x\n\r", (u32)reg);
|
|
printf("CQR: %08x\n\r", in_le32(®->cqr));
|
|
printf("CAR: %08x\n\r", in_le32(®->car));
|
|
printf("CCR: %08x\n\r", in_le32(®->ccr));
|
|
printf("CER: %08x\n\r", in_le32(®->cer));
|
|
printf("CQR: %08x\n\r", in_le32(®->cqr));
|
|
printf("DER: %08x\n\r", in_le32(®->der));
|
|
printf("CHBA: %08x\n\r", in_le32(®->chba));
|
|
printf("HStatus: %08x\n\r", in_le32(®->hstatus));
|
|
printf("HControl: %08x\n\r", in_le32(®->hcontrol));
|
|
printf("CQPMP: %08x\n\r", in_le32(®->cqpmp));
|
|
printf("SIG: %08x\n\r", in_le32(®->sig));
|
|
printf("ICC: %08x\n\r", in_le32(®->icc));
|
|
printf("SStatus: %08x\n\r", in_le32(®->sstatus));
|
|
printf("SError: %08x\n\r", in_le32(®->serror));
|
|
printf("SControl: %08x\n\r", in_le32(®->scontrol));
|
|
printf("SNotification: %08x\n\r", in_le32(®->snotification));
|
|
printf("TransCfg: %08x\n\r", in_le32(®->transcfg));
|
|
printf("TransStatus: %08x\n\r", in_le32(®->transstatus));
|
|
printf("LinkCfg: %08x\n\r", in_le32(®->linkcfg));
|
|
printf("LinkCfg1: %08x\n\r", in_le32(®->linkcfg1));
|
|
printf("LinkCfg2: %08x\n\r", in_le32(®->linkcfg2));
|
|
printf("LinkStatus: %08x\n\r", in_le32(®->linkstatus));
|
|
printf("LinkStatus1: %08x\n\r", in_le32(®->linkstatus1));
|
|
printf("PhyCtrlCfg: %08x\n\r", in_le32(®->phyctrlcfg));
|
|
printf("SYSPR: %08x\n\r", in_be32(®->syspr));
|
|
}
|
|
|
|
static int fsl_ata_exec_ata_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
|
|
int is_ncq, int tag, u8 *buffer, u32 len)
|
|
{
|
|
cmd_hdr_entry_t *cmd_hdr;
|
|
cmd_desc_t *cmd_desc;
|
|
sata_fis_h2d_t *h2d;
|
|
prd_entry_t *prde;
|
|
u32 ext_c_ddc;
|
|
u32 prde_count;
|
|
u32 val32;
|
|
u32 ttl;
|
|
fsl_sata_reg_t __iomem *reg = sata->reg_base;
|
|
int i;
|
|
|
|
/* Check xfer length */
|
|
if (len > SATA_HC_MAX_XFER_LEN) {
|
|
printf("max transfer length is 64MB\n\r");
|
|
return 0;
|
|
}
|
|
|
|
/* Setup the command descriptor */
|
|
cmd_desc = sata->cmd_desc + tag;
|
|
|
|
/* Get the pointer cfis of command descriptor */
|
|
h2d = (sata_fis_h2d_t *)cmd_desc->cfis;
|
|
|
|
/* Zero the cfis of command descriptor */
|
|
memset((void *)h2d, 0, SATA_HC_CMD_DESC_CFIS_SIZE);
|
|
|
|
/* Copy the cfis from user to command descriptor */
|
|
h2d->fis_type = cfis->fis_type;
|
|
h2d->pm_port_c = cfis->pm_port_c;
|
|
h2d->command = cfis->command;
|
|
|
|
h2d->features = cfis->features;
|
|
h2d->features_exp = cfis->features_exp;
|
|
|
|
h2d->lba_low = cfis->lba_low;
|
|
h2d->lba_mid = cfis->lba_mid;
|
|
h2d->lba_high = cfis->lba_high;
|
|
h2d->lba_low_exp = cfis->lba_low_exp;
|
|
h2d->lba_mid_exp = cfis->lba_mid_exp;
|
|
h2d->lba_high_exp = cfis->lba_high_exp;
|
|
|
|
if (!is_ncq) {
|
|
h2d->sector_count = cfis->sector_count;
|
|
h2d->sector_count_exp = cfis->sector_count_exp;
|
|
} else { /* NCQ */
|
|
h2d->sector_count = (u8)(tag << 3);
|
|
}
|
|
|
|
h2d->device = cfis->device;
|
|
h2d->control = cfis->control;
|
|
|
|
/* Setup the PRD table */
|
|
prde = (prd_entry_t *)cmd_desc->prdt;
|
|
memset((void *)prde, 0, sizeof(struct prdt));
|
|
|
|
prde_count = 0;
|
|
ttl = len;
|
|
for (i = 0; i < SATA_HC_MAX_PRD_DIRECT; i++) {
|
|
if (!len)
|
|
break;
|
|
prde->dba = cpu_to_le32((u32)buffer & ~0x3);
|
|
debug("dba = %08x\n\r", (u32)buffer);
|
|
|
|
if (len < PRD_ENTRY_MAX_XFER_SZ) {
|
|
ext_c_ddc = PRD_ENTRY_DATA_SNOOP | len;
|
|
debug("ext_c_ddc1 = %08x, len = %08x\n\r", ext_c_ddc, len);
|
|
prde->ext_c_ddc = cpu_to_le32(ext_c_ddc);
|
|
prde_count++;
|
|
prde++;
|
|
break;
|
|
} else {
|
|
ext_c_ddc = PRD_ENTRY_DATA_SNOOP; /* 4M bytes */
|
|
debug("ext_c_ddc2 = %08x, len = %08x\n\r", ext_c_ddc, len);
|
|
prde->ext_c_ddc = cpu_to_le32(ext_c_ddc);
|
|
buffer += PRD_ENTRY_MAX_XFER_SZ;
|
|
len -= PRD_ENTRY_MAX_XFER_SZ;
|
|
prde_count++;
|
|
prde++;
|
|
}
|
|
}
|
|
|
|
/* Setup the command slot of cmd hdr */
|
|
cmd_hdr = (cmd_hdr_entry_t *)&sata->cmd_hdr->cmd_slot[tag];
|
|
|
|
cmd_hdr->cda = cpu_to_le32((u32)cmd_desc & ~0x3);
|
|
|
|
val32 = prde_count << CMD_HDR_PRD_ENTRY_SHIFT;
|
|
val32 |= sizeof(sata_fis_h2d_t);
|
|
cmd_hdr->prde_fis_len = cpu_to_le32(val32);
|
|
|
|
cmd_hdr->ttl = cpu_to_le32(ttl);
|
|
|
|
if (!is_ncq) {
|
|
val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP;
|
|
} else {
|
|
val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP | CMD_HDR_ATTR_FPDMA;
|
|
}
|
|
|
|
tag &= CMD_HDR_ATTR_TAG;
|
|
val32 |= tag;
|
|
|
|
debug("attribute = %08x\n\r", val32);
|
|
cmd_hdr->attribute = cpu_to_le32(val32);
|
|
|
|
/* Make sure cmd desc and cmd slot valid before command issue */
|
|
sync();
|
|
|
|
/* PMP*/
|
|
val32 = (u32)(h2d->pm_port_c & 0x0f);
|
|
out_le32(®->cqpmp, val32);
|
|
|
|
/* Wait no active */
|
|
if (ata_wait_register(®->car, (1 << tag), 0, 10000))
|
|
printf("Wait no active time out\n\r");
|
|
|
|
/* Issue command */
|
|
if (!(in_le32(®->cqr) & (1 << tag))) {
|
|
val32 = 1 << tag;
|
|
out_le32(®->cqr, val32);
|
|
}
|
|
|
|
/* Wait command completed for 10s */
|
|
if (ata_wait_register(®->ccr, (1 << tag), (1 << tag), 10000)) {
|
|
if (!is_ncq)
|
|
printf("Non-NCQ command time out\n\r");
|
|
else
|
|
printf("NCQ command time out\n\r");
|
|
}
|
|
|
|
val32 = in_le32(®->cer);
|
|
|
|
if (val32) {
|
|
u32 der;
|
|
fsl_sata_dump_sfis((struct sata_fis_d2h *)cmd_desc->sfis);
|
|
printf("CE at device\n\r");
|
|
fsl_sata_dump_regs(reg);
|
|
der = in_le32(®->der);
|
|
out_le32(®->cer, val32);
|
|
out_le32(®->der, der);
|
|
}
|
|
|
|
/* Clear complete flags */
|
|
val32 = in_le32(®->ccr);
|
|
out_le32(®->ccr, val32);
|
|
|
|
return len;
|
|
}
|
|
|
|
static int fsl_ata_exec_reset_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
|
|
int tag, u8 *buffer, u32 len)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_sata_exec_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis,
|
|
enum cmd_type command_type, int tag, u8 *buffer, u32 len)
|
|
{
|
|
int rc;
|
|
|
|
if (tag > SATA_HC_MAX_CMD || tag < 0) {
|
|
printf("tag is out of range, tag=%d\n\r", tag);
|
|
return -1;
|
|
}
|
|
|
|
switch (command_type) {
|
|
case CMD_ATA:
|
|
rc = fsl_ata_exec_ata_cmd(sata, cfis, 0, tag, buffer, len);
|
|
return rc;
|
|
case CMD_RESET:
|
|
rc = fsl_ata_exec_reset_cmd(sata, cfis, tag, buffer, len);
|
|
return rc;
|
|
case CMD_NCQ:
|
|
rc = fsl_ata_exec_ata_cmd(sata, cfis, 1, tag, buffer, len);
|
|
return rc;
|
|
case CMD_ATAPI:
|
|
case CMD_VENDOR_BIST:
|
|
case CMD_BIST:
|
|
printf("not support now\n\r");
|
|
return -1;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static void fsl_sata_identify(int dev, u16 *id)
|
|
{
|
|
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
|
|
struct sata_fis_h2d h2d, *cfis = &h2d;
|
|
|
|
memset(cfis, 0, sizeof(struct sata_fis_h2d));
|
|
|
|
cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
|
|
cfis->pm_port_c = 0x80; /* is command */
|
|
cfis->command = ATA_CMD_ID_ATA;
|
|
|
|
fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, (u8 *)id, ATA_ID_WORDS * 2);
|
|
ata_swap_buf_le16(id, ATA_ID_WORDS);
|
|
}
|
|
|
|
static void fsl_sata_xfer_mode(int dev, u16 *id)
|
|
{
|
|
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
|
|
|
|
sata->pio = id[ATA_ID_PIO_MODES];
|
|
sata->mwdma = id[ATA_ID_MWDMA_MODES];
|
|
sata->udma = id[ATA_ID_UDMA_MODES];
|
|
debug("pio %04x, mwdma %04x, udma %04x\n\r", sata->pio, sata->mwdma, sata->udma);
|
|
}
|
|
|
|
static void fsl_sata_set_features(int dev)
|
|
{
|
|
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
|
|
struct sata_fis_h2d h2d, *cfis = &h2d;
|
|
u8 udma_cap;
|
|
|
|
memset(cfis, 0, sizeof(struct sata_fis_h2d));
|
|
|
|
cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
|
|
cfis->pm_port_c = 0x80; /* is command */
|
|
cfis->command = ATA_CMD_SET_FEATURES;
|
|
cfis->features = SETFEATURES_XFER;
|
|
|
|
/* First check the device capablity */
|
|
udma_cap = (u8)(sata->udma & 0xff);
|
|
debug("udma_cap %02x\n\r", udma_cap);
|
|
|
|
if (udma_cap == ATA_UDMA6)
|
|
cfis->sector_count = XFER_UDMA_6;
|
|
if (udma_cap == ATA_UDMA5)
|
|
cfis->sector_count = XFER_UDMA_5;
|
|
if (udma_cap == ATA_UDMA4)
|
|
cfis->sector_count = XFER_UDMA_4;
|
|
if (udma_cap == ATA_UDMA3)
|
|
cfis->sector_count = XFER_UDMA_3;
|
|
|
|
fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
|
|
}
|
|
|
|
static u32 fsl_sata_rw_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write)
|
|
{
|
|
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
|
|
struct sata_fis_h2d h2d, *cfis = &h2d;
|
|
u32 block;
|
|
|
|
block = start;
|
|
|
|
memset(cfis, 0, sizeof(struct sata_fis_h2d));
|
|
|
|
cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
|
|
cfis->pm_port_c = 0x80; /* is command */
|
|
cfis->command = (is_write) ? ATA_CMD_WRITE : ATA_CMD_READ;
|
|
cfis->device = ATA_LBA;
|
|
|
|
cfis->device |= (block >> 24) & 0xf;
|
|
cfis->lba_high = (block >> 16) & 0xff;
|
|
cfis->lba_mid = (block >> 8) & 0xff;
|
|
cfis->lba_low = block & 0xff;
|
|
cfis->sector_count = (u8)(blkcnt & 0xff);
|
|
|
|
fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer, ATA_SECT_SIZE * blkcnt);
|
|
return blkcnt;
|
|
}
|
|
|
|
static void fsl_sata_flush_cache(int dev)
|
|
{
|
|
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
|
|
struct sata_fis_h2d h2d, *cfis = &h2d;
|
|
|
|
memset(cfis, 0, sizeof(struct sata_fis_h2d));
|
|
|
|
cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
|
|
cfis->pm_port_c = 0x80; /* is command */
|
|
cfis->command = ATA_CMD_FLUSH;
|
|
|
|
fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
|
|
}
|
|
|
|
static u32 fsl_sata_rw_cmd_ext(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write)
|
|
{
|
|
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
|
|
struct sata_fis_h2d h2d, *cfis = &h2d;
|
|
u64 block;
|
|
|
|
block = (u64)start;
|
|
|
|
memset(cfis, 0, sizeof(struct sata_fis_h2d));
|
|
|
|
cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
|
|
cfis->pm_port_c = 0x80; /* is command */
|
|
|
|
cfis->command = (is_write) ? ATA_CMD_WRITE_EXT
|
|
: ATA_CMD_READ_EXT;
|
|
|
|
cfis->lba_high_exp = (block >> 40) & 0xff;
|
|
cfis->lba_mid_exp = (block >> 32) & 0xff;
|
|
cfis->lba_low_exp = (block >> 24) & 0xff;
|
|
cfis->lba_high = (block >> 16) & 0xff;
|
|
cfis->lba_mid = (block >> 8) & 0xff;
|
|
cfis->lba_low = block & 0xff;
|
|
cfis->device = ATA_LBA;
|
|
cfis->sector_count_exp = (blkcnt >> 8) & 0xff;
|
|
cfis->sector_count = blkcnt & 0xff;
|
|
|
|
fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer, ATA_SECT_SIZE * blkcnt);
|
|
return blkcnt;
|
|
}
|
|
|
|
static u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer,
|
|
int is_write)
|
|
{
|
|
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
|
|
struct sata_fis_h2d h2d, *cfis = &h2d;
|
|
int ncq_channel;
|
|
u64 block;
|
|
|
|
if (sata->lba48 != 1) {
|
|
printf("execute FPDMA command on non-LBA48 hard disk\n\r");
|
|
return -1;
|
|
}
|
|
|
|
block = (u64)start;
|
|
|
|
memset(cfis, 0, sizeof(struct sata_fis_h2d));
|
|
|
|
cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
|
|
cfis->pm_port_c = 0x80; /* is command */
|
|
|
|
cfis->command = (is_write) ? ATA_CMD_FPDMA_WRITE
|
|
: ATA_CMD_FPDMA_READ;
|
|
|
|
cfis->lba_high_exp = (block >> 40) & 0xff;
|
|
cfis->lba_mid_exp = (block >> 32) & 0xff;
|
|
cfis->lba_low_exp = (block >> 24) & 0xff;
|
|
cfis->lba_high = (block >> 16) & 0xff;
|
|
cfis->lba_mid = (block >> 8) & 0xff;
|
|
cfis->lba_low = block & 0xff;
|
|
|
|
cfis->device = ATA_LBA;
|
|
cfis->features_exp = (blkcnt >> 8) & 0xff;
|
|
cfis->features = blkcnt & 0xff;
|
|
|
|
if (sata->queue_depth >= SATA_HC_MAX_CMD)
|
|
ncq_channel = SATA_HC_MAX_CMD - 1;
|
|
else
|
|
ncq_channel = sata->queue_depth - 1;
|
|
|
|
/* Use the latest queue */
|
|
fsl_sata_exec_cmd(sata, cfis, CMD_NCQ, ncq_channel, buffer, ATA_SECT_SIZE * blkcnt);
|
|
return blkcnt;
|
|
}
|
|
|
|
static void fsl_sata_flush_cache_ext(int dev)
|
|
{
|
|
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
|
|
struct sata_fis_h2d h2d, *cfis = &h2d;
|
|
|
|
memset(cfis, 0, sizeof(struct sata_fis_h2d));
|
|
|
|
cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D;
|
|
cfis->pm_port_c = 0x80; /* is command */
|
|
cfis->command = ATA_CMD_FLUSH_EXT;
|
|
|
|
fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
|
|
}
|
|
|
|
static void fsl_sata_init_wcache(int dev, u16 *id)
|
|
{
|
|
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
|
|
|
|
if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id))
|
|
sata->wcache = 1;
|
|
if (ata_id_has_flush(id))
|
|
sata->flush = 1;
|
|
if (ata_id_has_flush_ext(id))
|
|
sata->flush_ext = 1;
|
|
}
|
|
|
|
static int fsl_sata_get_wcache(int dev)
|
|
{
|
|
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
|
|
return sata->wcache;
|
|
}
|
|
|
|
static int fsl_sata_get_flush(int dev)
|
|
{
|
|
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
|
|
return sata->flush;
|
|
}
|
|
|
|
static int fsl_sata_get_flush_ext(int dev)
|
|
{
|
|
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
|
|
return sata->flush_ext;
|
|
}
|
|
|
|
static u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt,
|
|
const void *buffer, int is_write)
|
|
{
|
|
u32 start, blks;
|
|
u8 *addr;
|
|
int max_blks;
|
|
|
|
start = blknr;
|
|
blks = blkcnt;
|
|
addr = (u8 *)buffer;
|
|
|
|
max_blks = ATA_MAX_SECTORS_LBA48;
|
|
do {
|
|
if (blks > max_blks) {
|
|
if (fsl_sata_info[dev].flags != FLAGS_FPDMA)
|
|
fsl_sata_rw_cmd_ext(dev, start, max_blks, addr, is_write);
|
|
else
|
|
fsl_sata_rw_ncq_cmd(dev, start, max_blks, addr, is_write);
|
|
start += max_blks;
|
|
blks -= max_blks;
|
|
addr += ATA_SECT_SIZE * max_blks;
|
|
} else {
|
|
if (fsl_sata_info[dev].flags != FLAGS_FPDMA)
|
|
fsl_sata_rw_cmd_ext(dev, start, blks, addr, is_write);
|
|
else
|
|
fsl_sata_rw_ncq_cmd(dev, start, blks, addr, is_write);
|
|
start += blks;
|
|
blks = 0;
|
|
addr += ATA_SECT_SIZE * blks;
|
|
}
|
|
} while (blks != 0);
|
|
|
|
return blkcnt;
|
|
}
|
|
|
|
static u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt,
|
|
const void *buffer, int is_write)
|
|
{
|
|
u32 start, blks;
|
|
u8 *addr;
|
|
int max_blks;
|
|
|
|
start = blknr;
|
|
blks = blkcnt;
|
|
addr = (u8 *)buffer;
|
|
|
|
max_blks = ATA_MAX_SECTORS;
|
|
do {
|
|
if (blks > max_blks) {
|
|
fsl_sata_rw_cmd(dev, start, max_blks, addr, is_write);
|
|
start += max_blks;
|
|
blks -= max_blks;
|
|
addr += ATA_SECT_SIZE * max_blks;
|
|
} else {
|
|
fsl_sata_rw_cmd(dev, start, blks, addr, is_write);
|
|
start += blks;
|
|
blks = 0;
|
|
addr += ATA_SECT_SIZE * blks;
|
|
}
|
|
} while (blks != 0);
|
|
|
|
return blkcnt;
|
|
}
|
|
|
|
/*
|
|
* SATA interface between low level driver and command layer
|
|
*/
|
|
ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer)
|
|
{
|
|
u32 rc;
|
|
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
|
|
|
|
if (sata->lba48)
|
|
rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, buffer, READ_CMD);
|
|
else
|
|
rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, buffer, READ_CMD);
|
|
return rc;
|
|
}
|
|
|
|
ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer)
|
|
{
|
|
u32 rc;
|
|
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
|
|
|
|
if (sata->lba48) {
|
|
rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, buffer, WRITE_CMD);
|
|
if (fsl_sata_get_wcache(dev) && fsl_sata_get_flush_ext(dev))
|
|
fsl_sata_flush_cache_ext(dev);
|
|
} else {
|
|
rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, buffer, WRITE_CMD);
|
|
if (fsl_sata_get_wcache(dev) && fsl_sata_get_flush(dev))
|
|
fsl_sata_flush_cache(dev);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
int scan_sata(int dev)
|
|
{
|
|
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
|
|
unsigned char serial[ATA_ID_SERNO_LEN + 1];
|
|
unsigned char firmware[ATA_ID_FW_REV_LEN + 1];
|
|
unsigned char product[ATA_ID_PROD_LEN + 1];
|
|
u16 *id;
|
|
u64 n_sectors;
|
|
|
|
/* if no detected link */
|
|
if (!sata->link)
|
|
return -1;
|
|
|
|
id = (u16 *)malloc(ATA_ID_WORDS * 2);
|
|
if (!id) {
|
|
printf("id malloc failed\n\r");
|
|
return -1;
|
|
}
|
|
|
|
/* Identify device to get information */
|
|
fsl_sata_identify(dev, id);
|
|
|
|
/* Serial number */
|
|
ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial));
|
|
memcpy(sata_dev_desc[dev].product, serial, sizeof(serial));
|
|
|
|
/* Firmware version */
|
|
ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware));
|
|
memcpy(sata_dev_desc[dev].revision, firmware, sizeof(firmware));
|
|
|
|
/* Product model */
|
|
ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product));
|
|
memcpy(sata_dev_desc[dev].vendor, product, sizeof(product));
|
|
|
|
/* Totoal sectors */
|
|
n_sectors = ata_id_n_sectors(id);
|
|
sata_dev_desc[dev].lba = (u32)n_sectors;
|
|
|
|
#ifdef CONFIG_LBA48
|
|
/* Check if support LBA48 */
|
|
if (ata_id_has_lba48(id)) {
|
|
sata->lba48 = 1;
|
|
debug("Device support LBA48\n\r");
|
|
} else
|
|
debug("Device supports LBA28\n\r");
|
|
#endif
|
|
|
|
/* Get the NCQ queue depth from device */
|
|
sata->queue_depth = ata_id_queue_depth(id);
|
|
|
|
/* Get the xfer mode from device */
|
|
fsl_sata_xfer_mode(dev, id);
|
|
|
|
/* Get the write cache status from device */
|
|
fsl_sata_init_wcache(dev, id);
|
|
|
|
/* Set the xfer mode to highest speed */
|
|
fsl_sata_set_features(dev);
|
|
#ifdef DEBUG
|
|
fsl_sata_identify(dev, id);
|
|
ata_dump_id(id);
|
|
#endif
|
|
free((void *)id);
|
|
return 0;
|
|
}
|