u-boot/lib_arm/_divsi3.S
Wolfgang Denk ba94a1bba3 * Update Intel IXP4xx support
- Add IXP4xx NPE ethernet MAC support
- Add support for Intel IXDPG425 board
- Add support for Prodrive PDNB3 board
- Add IRQ support
Patch by Stefan Roese, 23 May 2006

[This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still
 sufferes from licensing issues. Blame Intel.]
2006-05-30 15:56:48 +02:00

141 lines
3.0 KiB
ArmAsm

.macro ARM_DIV_BODY dividend, divisor, result, curbit
#if __LINUX_ARM_ARCH__ >= 5
clz \curbit, \divisor
clz \result, \dividend
sub \result, \curbit, \result
mov \curbit, #1
mov \divisor, \divisor, lsl \result
mov \curbit, \curbit, lsl \result
mov \result, #0
#else
@ Initially shift the divisor left 3 bits if possible,
@ set curbit accordingly. This allows for curbit to be located
@ at the left end of each 4 bit nibbles in the division loop
@ to save one loop in most cases.
tst \divisor, #0xe0000000
moveq \divisor, \divisor, lsl #3
moveq \curbit, #8
movne \curbit, #1
@ Unless the divisor is very big, shift it up in multiples of
@ four bits, since this is the amount of unwinding in the main
@ division loop. Continue shifting until the divisor is
@ larger than the dividend.
1: cmp \divisor, #0x10000000
cmplo \divisor, \dividend
movlo \divisor, \divisor, lsl #4
movlo \curbit, \curbit, lsl #4
blo 1b
@ For very big divisors, we must shift it a bit at a time, or
@ we will be in danger of overflowing.
1: cmp \divisor, #0x80000000
cmplo \divisor, \dividend
movlo \divisor, \divisor, lsl #1
movlo \curbit, \curbit, lsl #1
blo 1b
mov \result, #0
#endif
@ Division loop
1: cmp \dividend, \divisor
subhs \dividend, \dividend, \divisor
orrhs \result, \result, \curbit
cmp \dividend, \divisor, lsr #1
subhs \dividend, \dividend, \divisor, lsr #1
orrhs \result, \result, \curbit, lsr #1
cmp \dividend, \divisor, lsr #2
subhs \dividend, \dividend, \divisor, lsr #2
orrhs \result, \result, \curbit, lsr #2
cmp \dividend, \divisor, lsr #3
subhs \dividend, \dividend, \divisor, lsr #3
orrhs \result, \result, \curbit, lsr #3
cmp \dividend, #0 @ Early termination?
movnes \curbit, \curbit, lsr #4 @ No, any more bits to do?
movne \divisor, \divisor, lsr #4
bne 1b
.endm
.macro ARM_DIV2_ORDER divisor, order
#if __LINUX_ARM_ARCH__ >= 5
clz \order, \divisor
rsb \order, \order, #31
#else
cmp \divisor, #(1 << 16)
movhs \divisor, \divisor, lsr #16
movhs \order, #16
movlo \order, #0
cmp \divisor, #(1 << 8)
movhs \divisor, \divisor, lsr #8
addhs \order, \order, #8
cmp \divisor, #(1 << 4)
movhs \divisor, \divisor, lsr #4
addhs \order, \order, #4
cmp \divisor, #(1 << 2)
addhi \order, \order, #3
addls \order, \order, \divisor, lsr #1
#endif
.endm
.align 5
.globl __divsi3
__divsi3:
cmp r1, #0
eor ip, r0, r1 @ save the sign of the result.
beq Ldiv0
rsbmi r1, r1, #0 @ loops below use unsigned.
subs r2, r1, #1 @ division by 1 or -1 ?
beq 10f
movs r3, r0
rsbmi r3, r0, #0 @ positive dividend value
cmp r3, r1
bls 11f
tst r1, r2 @ divisor is power of 2 ?
beq 12f
ARM_DIV_BODY r3, r1, r0, r2
cmp ip, #0
rsbmi r0, r0, #0
mov pc, lr
10: teq ip, r0 @ same sign ?
rsbmi r0, r0, #0
mov pc, lr
11: movlo r0, #0
moveq r0, ip, asr #31
orreq r0, r0, #1
mov pc, lr
12: ARM_DIV2_ORDER r1, r2
cmp ip, #0
mov r0, r3, lsr r2
rsbmi r0, r0, #0
mov pc, lr
Ldiv0:
str lr, [sp, #-4]!
bl __div0
mov r0, #0 @ About as wrong as it could be.
ldr pc, [sp], #4