7b5b934313
Add support for i.MX8X based Capricorn Giedi SoM. Supported interfaces: GPIO, ENET, eMMC, I2C, UART. Console output: U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) Trying to boot from MMC1 Load image from MMC/SD 0x3e400 U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07 CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C Model: Siemens Giedi Board: Capricorn Boot: MMC0 DRAM: 1022 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial@5a080000 Out: serial@5a080000 Err: serial@5a080000 Net: eth1: ethernet@5b050000 [PRIME] Autobooting in 1 seconds, press "<Esc><Esc>" to stop Signed-off-by: Anatolij Gustschin <agust@denx.de>
20 lines
854 B
C
20 lines
854 B
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/* Be very careful updating CONFIG_IDENT_STRING
|
|
* This string will control the update flow whether an U-Boot should be
|
|
* updated or not. If the version of installed U-Boot (in flash) is smaller
|
|
* than the version to be installed (from update file), an update will
|
|
* be performed.
|
|
*
|
|
* General rules:
|
|
* 1. First 4 characters ' ##v' or IDENT_MAGIC represent kind of a magic number
|
|
* to identify the following strings after easily. Don't change them!
|
|
*
|
|
* 2. First 2 digits after 'v' or CCP_MAJOR are updated with U-Boot version
|
|
* change, e.g. from 2015.04 to 2018.03
|
|
*
|
|
* 3. Second 2 digits after '.' or CCP_MINOR are updated if we want to upgrade
|
|
* U-Boot within an U-Boot version.
|
|
*/
|
|
#define CCP_IDENT_MAGIC " ##v"
|
|
#define GENERATE_CCP_VERSION(MAJOR, MINOR) CCP_IDENT_MAGIC MAJOR "." MINOR
|