32139c25e4
The BSP platform LmP supports the board NXP iMX8QM MEK. The
kernel size in LmP exceeds 32Mb. Increase the maximum size
of an uncompressed kernel to fix the following error:
Uncompressing Kernel Image
Error: inflate() returned -5
Image too large: increase CONFIG_SYS_BOOTM_LEN
Must RESET board to recover
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
172 lines
4.9 KiB
C
172 lines
4.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2018 NXP
|
|
*/
|
|
|
|
#ifndef __IMX8QM_MEK_H
|
|
#define __IMX8QM_MEK_H
|
|
|
|
#include <linux/sizes.h>
|
|
#include <linux/stringify.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
#define CONFIG_SYS_BOOTM_LEN (64 * SZ_1M)
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SPL_MAX_SIZE (124 * 1024)
|
|
#define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800
|
|
|
|
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
|
|
#define CONFIG_SPL_STACK 0x013E000
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x00128000
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */
|
|
#define CONFIG_SYS_SPL_MALLOC_START 0x00120000
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */
|
|
#define CONFIG_SERIAL_LPUART_BASE 0x5a060000
|
|
#define CONFIG_MALLOC_F_ADDR 0x00120000
|
|
|
|
#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
|
|
|
|
#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
|
|
|
|
#define CONFIG_OF_EMBED
|
|
#endif
|
|
|
|
#define CONFIG_REMAKE_ELF
|
|
|
|
/* Flat Device Tree Definitions */
|
|
#define CONFIG_OF_BOARD_SETUP
|
|
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
#define USDHC1_BASE_ADDR 0x5B010000
|
|
#define USDHC2_BASE_ADDR 0x5B020000
|
|
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
|
|
|
|
#ifdef CONFIG_AHAB_BOOT
|
|
#define AHAB_ENV "sec_boot=yes\0"
|
|
#else
|
|
#define AHAB_ENV "sec_boot=no\0"
|
|
#endif
|
|
|
|
/* Initial environment variables */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
AHAB_ENV \
|
|
"script=boot.scr\0" \
|
|
"image=Image\0" \
|
|
"panel=NULL\0" \
|
|
"console=ttyLP0,${baudrate} earlycon=lpuart32,0x5a060000,${baudrate}\0" \
|
|
"fdt_addr=0x83000000\0" \
|
|
"fdt_high=0xffffffffffffffff\0" \
|
|
"boot_fdt=try\0" \
|
|
"fdt_file=undefined\0" \
|
|
"initrd_addr=0x83800000\0" \
|
|
"initrd_high=0xffffffffffffffff\0" \
|
|
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
|
|
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
|
|
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
|
|
"mmcautodetect=yes\0" \
|
|
"mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
|
|
"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
|
|
"bootscript=echo Running bootscript from mmc ...; " \
|
|
"source\0" \
|
|
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
|
|
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
|
|
"boot_os=booti ${loadaddr} - ${fdt_addr};\0" \
|
|
"loadcntr=fatload mmc ${mmcdev}:${mmcpart} ${cntr_addr} ${cntr_file}\0" \
|
|
"auth_os=auth_cntr ${cntr_addr}\0" \
|
|
"mmcboot=echo Booting from mmc ...; " \
|
|
"run mmcargs; " \
|
|
"if test ${sec_boot} = yes; then " \
|
|
"if run auth_os; then " \
|
|
"run boot_os; " \
|
|
"else " \
|
|
"echo ERR: failed to authenticate; " \
|
|
"fi; " \
|
|
"else " \
|
|
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
|
"if run loadfdt; then " \
|
|
"run boot_os; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"else " \
|
|
"echo wait for boot; " \
|
|
"fi;" \
|
|
"fi;\0" \
|
|
"netargs=setenv bootargs console=${console} " \
|
|
"root=/dev/nfs " \
|
|
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
|
|
"netboot=echo Booting from net ...; " \
|
|
"run netargs; " \
|
|
"if test ${ip_dyn} = yes; then " \
|
|
"setenv get_cmd dhcp; " \
|
|
"else " \
|
|
"setenv get_cmd tftp; " \
|
|
"fi; " \
|
|
"if test ${sec_boot} = yes; then " \
|
|
"${get_cmd} ${cntr_addr} ${cntr_file}; " \
|
|
"if run auth_os; then " \
|
|
"run boot_os; " \
|
|
"else " \
|
|
"echo ERR: failed to authenticate; " \
|
|
"fi; " \
|
|
"else " \
|
|
"${get_cmd} ${loadaddr} ${image}; " \
|
|
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
|
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
|
|
"booti ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"else " \
|
|
"booti; " \
|
|
"fi;" \
|
|
"fi;\0"
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"mmc dev ${mmcdev}; if mmc rescan; then " \
|
|
"if run loadbootscript; then " \
|
|
"run bootscript; " \
|
|
"else " \
|
|
"if test ${sec_boot} = yes; then " \
|
|
"if run loadcntr; then " \
|
|
"run mmcboot; " \
|
|
"else run netboot; " \
|
|
"fi; " \
|
|
"else " \
|
|
"if run loadimage; then " \
|
|
"run mmcboot; " \
|
|
"else run netboot; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"else booti ${loadaddr} - ${fdt_addr}; fi"
|
|
|
|
/* Link Definitions */
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
|
|
|
|
/* Default environment is in SD */
|
|
|
|
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
|
|
|
|
/* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */
|
|
#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x80000000
|
|
#define PHYS_SDRAM_1 0x80000000
|
|
#define PHYS_SDRAM_2 0x880000000
|
|
#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */
|
|
#define PHYS_SDRAM_2_SIZE 0x100000000 /* 4 GB */
|
|
|
|
/* Generic Timer Definitions */
|
|
#define COUNTER_FREQUENCY 8000000 /* 8MHz */
|
|
|
|
/* Networking */
|
|
#define CONFIG_FEC_XCV_TYPE RGMII
|
|
|
|
#endif /* __IMX8QM_MEK_H */
|