111688839a
This converts CONFIG_SYS_L2_PL310 to Kconfig. For omap2 and mvebu the 'select SYS_L2_PL310' locations were determined using ./tools/moveconfig -i CONFIG_SYS_L2_PL310. For mx6 I manually chose ARCH_MX6 as 'select' location. The correctness has been verified using $ ./tools/moveconfig.py -f ARCH_MX6 ~SYS_L2_PL310 ~SYS_L2CACHE_OFF 0 matches That means whenever an ARCH_MX6 board had SYS_L2_PL310 disabled, this was correctly reflected in SYS_L2CACHE_OFF. Thus it's safe to insert the 'select' statement under ARCH_MX6. Signed-off-by: Philip Oberfichtner <pro@denx.de>
40 lines
1.4 KiB
C
40 lines
1.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (c) 2021 Nuvoton Technology Corp.
|
|
*/
|
|
|
|
#ifndef __CONFIG_POLEG_H
|
|
#define __CONFIG_POLEG_H
|
|
|
|
#ifndef CONFIG_SYS_L2CACHE_OFF
|
|
#define CONFIG_SYS_PL310_BASE 0xF03FC000 /* L2 - Cache Regs Base (4k Space)*/
|
|
#endif
|
|
|
|
#define CONFIG_SYS_BOOTMAPSZ (0x30 << 20)
|
|
#define CONFIG_SYS_SDRAM_BASE 0x0
|
|
|
|
/* Default environemnt variables */
|
|
#define CONFIG_SERVERIP 192.168.0.1
|
|
#define CONFIG_IPADDR 192.168.0.2
|
|
#define CONFIG_NETMASK 255.255.255.0
|
|
#define CONFIG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80200000\0" \
|
|
"stdin=serial\0" \
|
|
"stdout=serial\0" \
|
|
"stderr=serial\0" \
|
|
"ethact=eth${eth_num}\0" \
|
|
"romboot=echo Booting from flash; echo +++ uimage at 0x${uimage_flash_addr}; " \
|
|
"echo Using bootargs: ${bootargs};bootm ${uimage_flash_addr}\0" \
|
|
"autostart=yes\0" \
|
|
"eth_num=0\0" \
|
|
"ethaddr=00:00:F7:A0:00:FC\0" \
|
|
"eth1addr=00:00:F7:A0:00:FD\0" \
|
|
"eth2addr=00:00:F7:A0:00:FE\0" \
|
|
"eth3addr=00:00:F7:A0:00:FF\0" \
|
|
"common_bootargs=setenv bootargs earlycon=${earlycon} root=/dev/ram " \
|
|
"console=${console} mem=${mem} ramdisk_size=48000 basemac=${ethaddr}\0" \
|
|
"sd_prog=fatload mmc 0 10000000 image-bmc; cp.b 10000000 80000000 ${filesize}\0" \
|
|
"sd_run=fatload mmc 0 10000000 image-bmc; bootm 10200000\0" \
|
|
"\0"
|
|
|
|
#endif
|