u-boot/configs/integratorcp_cm946es_defconfig
Tom Rini eaf6ea6a1d Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR
- Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack
  pointer directly, otherwise we use the common calculation.
- On some platforms that were using the standard calculation but did not
  set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them.
- On a small number of platforms that were not subtracting
  GENERATED_GBL_DATA_SIZE do so now via the standard calculation.
- CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most
  board config header files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:19 -04:00

40 lines
1.1 KiB
Plaintext

CONFIG_ARM=y
CONFIG_ARCH_INTEGRATOR=y
CONFIG_SYS_TEXT_BASE=0x01000000
CONFIG_SYS_MALLOC_LEN=0x22000
CONFIG_ARCH_INTEGRATOR_CP=y
CONFIG_CM946ES=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_SYS_LOAD_ADDR=0x7fc0
CONFIG_ENV_ADDR=0x24F00000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7ffff20
CONFIG_SYS_MONITOR_BASE=0x27F40000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="tftpboot ; bootm"
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PROMPT="Integrator-CP # "
CONFIG_SYS_CBSIZE=256
CONFIG_SYS_PBSIZE=289
CONFIG_CMD_IMLS=y
CONFIG_CMD_ARMFLASH=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="uImage"
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y