68083b897b
The compatible values used for device nodes representing Renesas Reduced Pin Count Interfaces were based on preliminary versions of the Device Tree Bindings. Correct them in both DTSi files and drivers, to match the final DT Bindings. Note that there are no DT bindings for RPC-IF on RZ/A1 yet, hence the most logical SoC-specific value is used, without specifying a family-specific value. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
468 lines
12 KiB
C
468 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Renesas RCar Gen3 RPC QSPI driver
|
|
*
|
|
* Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <dm/of_access.h>
|
|
#include <dt-structs.h>
|
|
#include <errno.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/errno.h>
|
|
#include <spi.h>
|
|
#include <wait_bit.h>
|
|
|
|
#define RPC_CMNCR 0x0000 /* R/W */
|
|
#define RPC_CMNCR_MD BIT(31)
|
|
#define RPC_CMNCR_SFDE BIT(24)
|
|
#define RPC_CMNCR_MOIIO3(val) (((val) & 0x3) << 22)
|
|
#define RPC_CMNCR_MOIIO2(val) (((val) & 0x3) << 20)
|
|
#define RPC_CMNCR_MOIIO1(val) (((val) & 0x3) << 18)
|
|
#define RPC_CMNCR_MOIIO0(val) (((val) & 0x3) << 16)
|
|
#define RPC_CMNCR_MOIIO_HIZ (RPC_CMNCR_MOIIO0(3) | RPC_CMNCR_MOIIO1(3) | \
|
|
RPC_CMNCR_MOIIO2(3) | RPC_CMNCR_MOIIO3(3))
|
|
#define RPC_CMNCR_IO3FV(val) (((val) & 0x3) << 14)
|
|
#define RPC_CMNCR_IO2FV(val) (((val) & 0x3) << 12)
|
|
#define RPC_CMNCR_IO0FV(val) (((val) & 0x3) << 8)
|
|
#define RPC_CMNCR_IOFV_HIZ (RPC_CMNCR_IO0FV(3) | RPC_CMNCR_IO2FV(3) | \
|
|
RPC_CMNCR_IO3FV(3))
|
|
#define RPC_CMNCR_CPHAT BIT(6)
|
|
#define RPC_CMNCR_CPHAR BIT(5)
|
|
#define RPC_CMNCR_SSLP BIT(4)
|
|
#define RPC_CMNCR_CPOL BIT(3)
|
|
#define RPC_CMNCR_BSZ(val) (((val) & 0x3) << 0)
|
|
|
|
#define RPC_SSLDR 0x0004 /* R/W */
|
|
#define RPC_SSLDR_SPNDL(d) (((d) & 0x7) << 16)
|
|
#define RPC_SSLDR_SLNDL(d) (((d) & 0x7) << 8)
|
|
#define RPC_SSLDR_SCKDL(d) (((d) & 0x7) << 0)
|
|
|
|
#define RPC_DRCR 0x000C /* R/W */
|
|
#define RPC_DRCR_SSLN BIT(24)
|
|
#define RPC_DRCR_RBURST(v) (((v) & 0x1F) << 16)
|
|
#define RPC_DRCR_RCF BIT(9)
|
|
#define RPC_DRCR_RBE BIT(8)
|
|
#define RPC_DRCR_SSLE BIT(0)
|
|
|
|
#define RPC_DRCMR 0x0010 /* R/W */
|
|
#define RPC_DRCMR_CMD(c) (((c) & 0xFF) << 16)
|
|
#define RPC_DRCMR_OCMD(c) (((c) & 0xFF) << 0)
|
|
|
|
#define RPC_DREAR 0x0014 /* R/W */
|
|
#define RPC_DREAR_EAV(v) (((v) & 0xFF) << 16)
|
|
#define RPC_DREAR_EAC(v) (((v) & 0x7) << 0)
|
|
|
|
#define RPC_DROPR 0x0018 /* R/W */
|
|
#define RPC_DROPR_OPD3(o) (((o) & 0xFF) << 24)
|
|
#define RPC_DROPR_OPD2(o) (((o) & 0xFF) << 16)
|
|
#define RPC_DROPR_OPD1(o) (((o) & 0xFF) << 8)
|
|
#define RPC_DROPR_OPD0(o) (((o) & 0xFF) << 0)
|
|
|
|
#define RPC_DRENR 0x001C /* R/W */
|
|
#define RPC_DRENR_CDB(o) (u32)((((o) & 0x3) << 30))
|
|
#define RPC_DRENR_OCDB(o) (((o) & 0x3) << 28)
|
|
#define RPC_DRENR_ADB(o) (((o) & 0x3) << 24)
|
|
#define RPC_DRENR_OPDB(o) (((o) & 0x3) << 20)
|
|
#define RPC_DRENR_SPIDB(o) (((o) & 0x3) << 16)
|
|
#define RPC_DRENR_DME BIT(15)
|
|
#define RPC_DRENR_CDE BIT(14)
|
|
#define RPC_DRENR_OCDE BIT(12)
|
|
#define RPC_DRENR_ADE(v) (((v) & 0xF) << 8)
|
|
#define RPC_DRENR_OPDE(v) (((v) & 0xF) << 4)
|
|
|
|
#define RPC_SMCR 0x0020 /* R/W */
|
|
#define RPC_SMCR_SSLKP BIT(8)
|
|
#define RPC_SMCR_SPIRE BIT(2)
|
|
#define RPC_SMCR_SPIWE BIT(1)
|
|
#define RPC_SMCR_SPIE BIT(0)
|
|
|
|
#define RPC_SMCMR 0x0024 /* R/W */
|
|
#define RPC_SMCMR_CMD(c) (((c) & 0xFF) << 16)
|
|
#define RPC_SMCMR_OCMD(c) (((c) & 0xFF) << 0)
|
|
|
|
#define RPC_SMADR 0x0028 /* R/W */
|
|
#define RPC_SMOPR 0x002C /* R/W */
|
|
#define RPC_SMOPR_OPD0(o) (((o) & 0xFF) << 0)
|
|
#define RPC_SMOPR_OPD1(o) (((o) & 0xFF) << 8)
|
|
#define RPC_SMOPR_OPD2(o) (((o) & 0xFF) << 16)
|
|
#define RPC_SMOPR_OPD3(o) (((o) & 0xFF) << 24)
|
|
|
|
#define RPC_SMENR 0x0030 /* R/W */
|
|
#define RPC_SMENR_CDB(o) (((o) & 0x3) << 30)
|
|
#define RPC_SMENR_OCDB(o) (((o) & 0x3) << 28)
|
|
#define RPC_SMENR_ADB(o) (((o) & 0x3) << 24)
|
|
#define RPC_SMENR_OPDB(o) (((o) & 0x3) << 20)
|
|
#define RPC_SMENR_SPIDB(o) (((o) & 0x3) << 16)
|
|
#define RPC_SMENR_DME BIT(15)
|
|
#define RPC_SMENR_CDE BIT(14)
|
|
#define RPC_SMENR_OCDE BIT(12)
|
|
#define RPC_SMENR_ADE(v) (((v) & 0xF) << 8)
|
|
#define RPC_SMENR_OPDE(v) (((v) & 0xF) << 4)
|
|
#define RPC_SMENR_SPIDE(v) (((v) & 0xF) << 0)
|
|
|
|
#define RPC_SMRDR0 0x0038 /* R */
|
|
#define RPC_SMRDR1 0x003C /* R */
|
|
#define RPC_SMWDR0 0x0040 /* R/W */
|
|
#define RPC_SMWDR1 0x0044 /* R/W */
|
|
#define RPC_CMNSR 0x0048 /* R */
|
|
#define RPC_CMNSR_SSLF BIT(1)
|
|
#define RPC_CMNSR_TEND BIT(0)
|
|
|
|
#define RPC_DRDMCR 0x0058 /* R/W */
|
|
#define RPC_DRDMCR_DMCYC(v) (((v) & 0xF) << 0)
|
|
|
|
#define RPC_DRDRENR 0x005C /* R/W */
|
|
#define RPC_DRDRENR_HYPE (0x5 << 12)
|
|
#define RPC_DRDRENR_ADDRE BIT(8)
|
|
#define RPC_DRDRENR_OPDRE BIT(4)
|
|
#define RPC_DRDRENR_DRDRE BIT(0)
|
|
|
|
#define RPC_SMDMCR 0x0060 /* R/W */
|
|
#define RPC_SMDMCR_DMCYC(v) (((v) & 0xF) << 0)
|
|
|
|
#define RPC_SMDRENR 0x0064 /* R/W */
|
|
#define RPC_SMDRENR_HYPE (0x5 << 12)
|
|
#define RPC_SMDRENR_ADDRE BIT(8)
|
|
#define RPC_SMDRENR_OPDRE BIT(4)
|
|
#define RPC_SMDRENR_SPIDRE BIT(0)
|
|
|
|
#define RPC_PHYCNT 0x007C /* R/W */
|
|
#define RPC_PHYCNT_CAL BIT(31)
|
|
#define PRC_PHYCNT_OCTA_AA BIT(22)
|
|
#define PRC_PHYCNT_OCTA_SA BIT(23)
|
|
#define PRC_PHYCNT_EXDS BIT(21)
|
|
#define RPC_PHYCNT_OCT BIT(20)
|
|
#define RPC_PHYCNT_STRTIM(v) (((v) & 0x7) << 15)
|
|
#define RPC_PHYCNT_WBUF2 BIT(4)
|
|
#define RPC_PHYCNT_WBUF BIT(2)
|
|
#define RPC_PHYCNT_MEM(v) (((v) & 0x3) << 0)
|
|
|
|
#define RPC_PHYINT 0x0088 /* R/W */
|
|
#define RPC_PHYINT_RSTEN BIT(18)
|
|
#define RPC_PHYINT_WPEN BIT(17)
|
|
#define RPC_PHYINT_INTEN BIT(16)
|
|
#define RPC_PHYINT_RST BIT(2)
|
|
#define RPC_PHYINT_WP BIT(1)
|
|
#define RPC_PHYINT_INT BIT(0)
|
|
|
|
#define RPC_WBUF 0x8000 /* R/W size=4/8/16/32/64Bytes */
|
|
#define RPC_WBUF_SIZE 0x100
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct rpc_spi_plat {
|
|
fdt_addr_t regs;
|
|
fdt_addr_t extr;
|
|
s32 freq; /* Default clock freq, -1 for none */
|
|
};
|
|
|
|
struct rpc_spi_priv {
|
|
fdt_addr_t regs;
|
|
fdt_addr_t extr;
|
|
struct clk clk;
|
|
|
|
u8 cmdcopy[8];
|
|
u32 cmdlen;
|
|
bool cmdstarted;
|
|
};
|
|
|
|
static int rpc_spi_wait_sslf(struct udevice *dev)
|
|
{
|
|
struct rpc_spi_priv *priv = dev_get_priv(dev->parent);
|
|
|
|
return wait_for_bit_le32((void *)priv->regs + RPC_CMNSR, RPC_CMNSR_SSLF,
|
|
false, 1000, false);
|
|
}
|
|
|
|
static int rpc_spi_wait_tend(struct udevice *dev)
|
|
{
|
|
struct rpc_spi_priv *priv = dev_get_priv(dev->parent);
|
|
|
|
return wait_for_bit_le32((void *)priv->regs + RPC_CMNSR, RPC_CMNSR_TEND,
|
|
true, 1000, false);
|
|
}
|
|
|
|
static void rpc_spi_flush_read_cache(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct rpc_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
/* Flush read cache */
|
|
writel(RPC_DRCR_SSLN | RPC_DRCR_RBURST(0x1f) |
|
|
RPC_DRCR_RCF | RPC_DRCR_RBE | RPC_DRCR_SSLE,
|
|
priv->regs + RPC_DRCR);
|
|
readl(priv->regs + RPC_DRCR);
|
|
|
|
}
|
|
|
|
static int rpc_spi_claim_bus(struct udevice *dev, bool manual)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct rpc_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
/*
|
|
* NOTE: The 0x260 are undocumented bits, but they must be set.
|
|
* NOTE: On H3 ES1.x (not supported in mainline U-Boot), the
|
|
* RPC_PHYCNT_STRTIM shall be 0, while on newer parts, the
|
|
* RPC_PHYCNT_STRTIM shall be 6.
|
|
*/
|
|
writel(RPC_PHYCNT_CAL | RPC_PHYCNT_STRTIM(6) | 0x260,
|
|
priv->regs + RPC_PHYCNT);
|
|
writel((manual ? RPC_CMNCR_MD : 0) | RPC_CMNCR_SFDE |
|
|
RPC_CMNCR_MOIIO_HIZ | RPC_CMNCR_IOFV_HIZ | RPC_CMNCR_BSZ(0),
|
|
priv->regs + RPC_CMNCR);
|
|
|
|
writel(RPC_SSLDR_SPNDL(7) | RPC_SSLDR_SLNDL(7) |
|
|
RPC_SSLDR_SCKDL(7), priv->regs + RPC_SSLDR);
|
|
|
|
rpc_spi_flush_read_cache(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rpc_spi_release_bus(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct rpc_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
/* NOTE: The 0x260 are undocumented bits, but they must be set. */
|
|
writel(RPC_PHYCNT_STRTIM(6) | 0x260, priv->regs + RPC_PHYCNT);
|
|
|
|
rpc_spi_flush_read_cache(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rpc_spi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct rpc_spi_priv *priv = dev_get_priv(bus);
|
|
u32 wlen = dout ? (bitlen / 8) : 0;
|
|
u32 rlen = din ? (bitlen / 8) : 0;
|
|
u32 wloop = DIV_ROUND_UP(wlen, 4);
|
|
u32 smenr, smcr, offset;
|
|
int ret = 0;
|
|
|
|
if (!priv->cmdstarted) {
|
|
if (!wlen || rlen)
|
|
BUG();
|
|
|
|
memcpy(priv->cmdcopy, dout, wlen);
|
|
priv->cmdlen = wlen;
|
|
|
|
/* Command transfer start */
|
|
priv->cmdstarted = true;
|
|
if (!(flags & SPI_XFER_END))
|
|
return 0;
|
|
}
|
|
|
|
offset = (priv->cmdcopy[1] << 16) | (priv->cmdcopy[2] << 8) |
|
|
(priv->cmdcopy[3] << 0);
|
|
|
|
smenr = 0;
|
|
|
|
if (wlen || (!rlen && !wlen) || flags == SPI_XFER_ONCE) {
|
|
if (wlen && flags == SPI_XFER_END)
|
|
smenr = RPC_SMENR_SPIDE(0xf);
|
|
|
|
rpc_spi_claim_bus(dev, true);
|
|
|
|
writel(0, priv->regs + RPC_SMCR);
|
|
|
|
if (priv->cmdlen >= 1) { /* Command(1) */
|
|
writel(RPC_SMCMR_CMD(priv->cmdcopy[0]),
|
|
priv->regs + RPC_SMCMR);
|
|
smenr |= RPC_SMENR_CDE;
|
|
} else {
|
|
writel(0, priv->regs + RPC_SMCMR);
|
|
}
|
|
|
|
if (priv->cmdlen >= 4) { /* Address(3) */
|
|
writel(offset, priv->regs + RPC_SMADR);
|
|
smenr |= RPC_SMENR_ADE(7);
|
|
} else {
|
|
writel(0, priv->regs + RPC_SMADR);
|
|
}
|
|
|
|
if (priv->cmdlen >= 5) { /* Dummy(n) */
|
|
writel(8 * (priv->cmdlen - 4) - 1,
|
|
priv->regs + RPC_SMDMCR);
|
|
smenr |= RPC_SMENR_DME;
|
|
} else {
|
|
writel(0, priv->regs + RPC_SMDMCR);
|
|
}
|
|
|
|
writel(0, priv->regs + RPC_SMOPR);
|
|
|
|
writel(0, priv->regs + RPC_SMDRENR);
|
|
|
|
if (wlen && flags == SPI_XFER_END) {
|
|
u32 *datout = (u32 *)dout;
|
|
|
|
while (wloop--) {
|
|
smcr = RPC_SMCR_SPIWE | RPC_SMCR_SPIE;
|
|
if (wloop >= 1)
|
|
smcr |= RPC_SMCR_SSLKP;
|
|
writel(smenr, priv->regs + RPC_SMENR);
|
|
writel(*datout, priv->regs + RPC_SMWDR0);
|
|
writel(smcr, priv->regs + RPC_SMCR);
|
|
ret = rpc_spi_wait_tend(dev);
|
|
if (ret)
|
|
goto err;
|
|
datout++;
|
|
smenr = RPC_SMENR_SPIDE(0xf);
|
|
}
|
|
|
|
ret = rpc_spi_wait_sslf(dev);
|
|
|
|
} else {
|
|
writel(smenr, priv->regs + RPC_SMENR);
|
|
writel(RPC_SMCR_SPIE, priv->regs + RPC_SMCR);
|
|
ret = rpc_spi_wait_tend(dev);
|
|
}
|
|
} else { /* Read data only, using DRx ext access */
|
|
rpc_spi_claim_bus(dev, false);
|
|
|
|
if (priv->cmdlen >= 1) { /* Command(1) */
|
|
writel(RPC_DRCMR_CMD(priv->cmdcopy[0]),
|
|
priv->regs + RPC_DRCMR);
|
|
smenr |= RPC_DRENR_CDE;
|
|
} else {
|
|
writel(0, priv->regs + RPC_DRCMR);
|
|
}
|
|
|
|
if (priv->cmdlen >= 4) /* Address(3) */
|
|
smenr |= RPC_DRENR_ADE(7);
|
|
|
|
if (priv->cmdlen >= 5) { /* Dummy(n) */
|
|
writel(8 * (priv->cmdlen - 4) - 1,
|
|
priv->regs + RPC_DRDMCR);
|
|
smenr |= RPC_DRENR_DME;
|
|
} else {
|
|
writel(0, priv->regs + RPC_DRDMCR);
|
|
}
|
|
|
|
writel(0, priv->regs + RPC_DROPR);
|
|
|
|
writel(smenr, priv->regs + RPC_DRENR);
|
|
|
|
if (rlen)
|
|
memcpy_fromio(din, (void *)(priv->extr + offset), rlen);
|
|
else
|
|
readl(priv->extr); /* Dummy read */
|
|
}
|
|
|
|
err:
|
|
priv->cmdstarted = false;
|
|
|
|
rpc_spi_release_bus(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rpc_spi_set_speed(struct udevice *bus, uint speed)
|
|
{
|
|
/* This is a SPI NOR controller, do nothing. */
|
|
return 0;
|
|
}
|
|
|
|
static int rpc_spi_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
/* This is a SPI NOR controller, do nothing. */
|
|
return 0;
|
|
}
|
|
|
|
static int rpc_spi_bind(struct udevice *parent)
|
|
{
|
|
const void *fdt = gd->fdt_blob;
|
|
ofnode node;
|
|
int ret, off;
|
|
|
|
/*
|
|
* Check if there are any SPI NOR child nodes, if so, bind as
|
|
* this controller will be operated in SPI mode.
|
|
*/
|
|
dev_for_each_subnode(node, parent) {
|
|
off = ofnode_to_offset(node);
|
|
|
|
ret = fdt_node_check_compatible(fdt, off, "spi-flash");
|
|
if (!ret)
|
|
return 0;
|
|
|
|
ret = fdt_node_check_compatible(fdt, off, "jedec,spi-nor");
|
|
if (!ret)
|
|
return 0;
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int rpc_spi_probe(struct udevice *dev)
|
|
{
|
|
struct rpc_spi_plat *plat = dev_get_plat(dev);
|
|
struct rpc_spi_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->regs = plat->regs;
|
|
priv->extr = plat->extr;
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
clk_enable(&priv->clk);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int rpc_spi_of_to_plat(struct udevice *bus)
|
|
{
|
|
struct rpc_spi_plat *plat = dev_get_plat(bus);
|
|
|
|
plat->regs = dev_read_addr_index(bus, 0);
|
|
plat->extr = dev_read_addr_index(bus, 1);
|
|
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
struct rpc_spi_priv *priv = dev_get_priv(bus);
|
|
int ret;
|
|
|
|
ret = clk_get_by_index(bus, 0, &priv->clk);
|
|
if (ret < 0) {
|
|
printf("%s: Could not get clock for %s: %d\n",
|
|
__func__, bus->name, ret);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
plat->freq = dev_read_u32_default(bus, "spi-max-freq", 50000000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops rpc_spi_ops = {
|
|
.xfer = rpc_spi_xfer,
|
|
.set_speed = rpc_spi_set_speed,
|
|
.set_mode = rpc_spi_set_mode,
|
|
};
|
|
|
|
static const struct udevice_id rpc_spi_ids[] = {
|
|
{ .compatible = "renesas,r7s72100-rpc-if" },
|
|
{ .compatible = "renesas,rcar-gen3-rpc-if" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rpc_spi) = {
|
|
.name = "rpc_spi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = rpc_spi_ids,
|
|
.ops = &rpc_spi_ops,
|
|
.of_to_plat = rpc_spi_of_to_plat,
|
|
.plat_auto = sizeof(struct rpc_spi_plat),
|
|
.priv_auto = sizeof(struct rpc_spi_priv),
|
|
.bind = rpc_spi_bind,
|
|
.probe = rpc_spi_probe,
|
|
};
|