addb2e1650
code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is implemented for these boards.
266 lines
8.0 KiB
C
266 lines
8.0 KiB
C
/*
|
|
* (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
|
|
*
|
|
* Configuation settings for the TI OMAP NetStar board.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <configs/omap1510.h>
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
|
|
#define CONFIG_OMAP 1 /* in a TI OMAP core */
|
|
#define CONFIG_OMAP1510 1 /* which is in a 5910 */
|
|
|
|
/* Input clock of PLL */
|
|
#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz input clock */
|
|
#define CONFIG_XTAL_FREQ 12000000
|
|
|
|
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
|
|
|
|
#define CONFIG_MISC_INIT_R /* There is nothing to really init */
|
|
#define BOARD_LATE_INIT /* but we flash the LEDs here */
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
#define CFG_DEVICE_NULLDEV 1 /* enable null device */
|
|
#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
|
|
|
|
/*
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
|
#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
|
|
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
|
|
|
|
/*
|
|
* FLASH organization
|
|
*/
|
|
#define CFG_FLASH_BASE PHYS_FLASH_1
|
|
#define CFG_MAX_FLASH_BANKS 1
|
|
#if (PHYS_SDRAM_1_SIZE == SZ_32M)
|
|
/*#if 1*/
|
|
#define CFG_FLASH_CFI /* Flash is CFI conformant */
|
|
#define CFG_FLASH_CFI_DRIVER /* Use the common driver */
|
|
#define CFG_FLASH_EMPTY_INFO
|
|
#define CFG_MAX_FLASH_SECT 128
|
|
#else
|
|
#define PHYS_FLASH_1_SIZE SZ_1M
|
|
#define CFG_MAX_FLASH_SECT 19
|
|
#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* in ticks */
|
|
#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ)
|
|
#endif
|
|
|
|
#define CFG_MONITOR_BASE PHYS_FLASH_1
|
|
#define CFG_MONITOR_LEN SZ_256K
|
|
|
|
/*
|
|
* Environment settings
|
|
*/
|
|
#define CFG_ENV_IS_IN_FLASH
|
|
#define ENV_IS_SOLITARY
|
|
#define CFG_ENV_ADDR 0x4000
|
|
#define CFG_ENV_SIZE SZ_8K
|
|
#define CFG_ENV_SECT_SIZE SZ_8K
|
|
#define CFG_ENV_ADDR_REDUND 0x6000
|
|
#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
/* XXX #define CFG_MALLOC_LEN (SZ_64K - CFG_GBL_DATA_SIZE)*/
|
|
#define CFG_MALLOC_LEN SZ_4M
|
|
|
|
/*
|
|
* The stack size is set up in start.S using the settings below
|
|
*/
|
|
/* XXX #define CONFIG_STACKSIZE SZ_8K /XXX* regular stack */
|
|
#define CONFIG_STACKSIZE SZ_1M /* regular stack */
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_DRIVER_SMC91111
|
|
#define CONFIG_SMC91111_BASE 0x04000300
|
|
|
|
/*
|
|
* NS16550 Configuration
|
|
*/
|
|
#define CFG_NS16550
|
|
#define CFG_NS16550_SERIAL
|
|
#define CFG_NS16550_REG_SIZE (-4)
|
|
#define CFG_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */
|
|
#define CFG_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */
|
|
|
|
#define CONFIG_CONS_INDEX 1
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
/*#define CONFIG_SKIP_RELOCATE_UBOOT*/
|
|
/*#define CONFIG_SKIP_LOWLEVEL_INIT */
|
|
|
|
/*
|
|
* NAND flash
|
|
*/
|
|
#define CFG_MAX_NAND_DEVICE 1
|
|
#define NAND_MAX_CHIPS 1
|
|
#define CFG_NAND_BASE 0x04000000 + (2 << 23)
|
|
|
|
/*
|
|
* JFFS2 partitions (mtdparts command line support)
|
|
*/
|
|
#define CONFIG_JFFS2_CMDLINE
|
|
#define MTDIDS_DEFAULT "nor0=omapflash.0,nand0=omapnand.0"
|
|
#define MTDPARTS_DEFAULT "mtdparts=omapflash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);omapnand.0:48M(rootfs0),48M(rootfs1),-(data)"
|
|
|
|
#if 0
|
|
#define CONFIG_COMMANDS (CFG_CMD_BDI | \
|
|
CFG_CMD_BOOTD | \
|
|
CFG_CMD_DHCP | \
|
|
CFG_CMD_ENV | \
|
|
CFG_CMD_FLASH | \
|
|
CFG_CMD_IMI | \
|
|
CFG_CMD_LOADB | \
|
|
CFG_CMD_NET | \
|
|
CFG_CMD_MEMORY | \
|
|
CFG_CMD_PING | \
|
|
CFG_CMD_RUN)
|
|
|
|
#else
|
|
#define CONFIG_COMMANDS (CFG_CMD_BDI | \
|
|
CFG_CMD_BOOTD | \
|
|
CFG_CMD_DHCP | \
|
|
CFG_CMD_ENV | \
|
|
CFG_CMD_FLASH | \
|
|
CFG_CMD_NAND | \
|
|
CFG_CMD_IMI | \
|
|
CFG_CMD_JFFS2 | \
|
|
CFG_CMD_LOADB | \
|
|
CFG_CMD_NET | \
|
|
CFG_CMD_MEMORY | \
|
|
CFG_CMD_PING | \
|
|
CFG_CMD_RUN)
|
|
|
|
#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */
|
|
#endif
|
|
|
|
#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
|
|
#define CONFIG_LOOPW
|
|
|
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
|
#include <cmd_confdefs.h>
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
|
|
#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
|
|
#define CFG_AUTOLOAD "n" /* No autoload */
|
|
#define CONFIG_BOOTCOMMAND "run nboot"
|
|
#define CONFIG_PREBOOT "run setup"
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"setup=setenv bootargs console=ttyS0,$baudrate " \
|
|
"$mtdparts\0" \
|
|
"ospart=0\0" \
|
|
"setpart=" \
|
|
"if test -n $swapos; then " \
|
|
"if test $ospart -eq 0; then chpart nand0,1; else chpart nand0,0; fi; "\
|
|
"setenv swapos; saveenv; " \
|
|
"else " \
|
|
"chpart nand0,$ospart; " \
|
|
"fi\0" \
|
|
"nfsargs=setenv bootargs $bootargs " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
|
|
"nfsroot=$rootpath root=/dev/nfs\0" \
|
|
"flashargs=run setpart;setenv bootargs $bootargs " \
|
|
"root=/dev/mtdblock$partition ro " \
|
|
"rootfstype=jffs2\0" \
|
|
"initrdargs=setenv bootargs $bootargs " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
|
|
"iboot=bootp;run initrdargs;tftp;bootm\0" \
|
|
"fboot=run flashargs;fsload /boot/uImage;bootm\0" \
|
|
"nboot=bootp;run nfsargs;tftp;bootm\0"
|
|
|
|
#if 0 /* feel free to disable for development */
|
|
#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
|
|
#define CONFIG_AUTOBOOT_PROMPT "\nNetStar PBX - boot in %d sec...\n"
|
|
#define CONFIG_AUTOBOOT_DELAY_STR "R" /* 1st "password" */
|
|
#define CONFIG_BOOT_RETRY_TIME 30
|
|
#endif
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "# " /* Monitor Command Prompt */
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_HUSH_PARSER
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
#define CONFIG_AUTO_COMPLETE
|
|
|
|
#define CFG_MEMTEST_START PHYS_SDRAM_1
|
|
#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE
|
|
|
|
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
|
|
|
|
#define CFG_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */
|
|
|
|
/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
|
|
* This time is further subdivided by a local divisor.
|
|
*/
|
|
#define CFG_TIMERBASE OMAP1510_TIMER1_BASE
|
|
#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */
|
|
#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
|
|
|
|
#define OMAP5910_DPLL_DIV 1
|
|
#define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \
|
|
(1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
|
|
|
|
#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */
|
|
#define OMAP5910_LCD_DIV 2 /* CKL/4 */
|
|
#define OMAP5910_ARM_DIV 0 /* CKL/1 */
|
|
#define OMAP5910_DSP_DIV 0 /* CKL/1 */
|
|
#define OMAP5910_TC_DIV 1 /* CKL/2 */
|
|
#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */
|
|
#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */
|
|
|
|
#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b Clock Enable */
|
|
#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \
|
|
(OMAP5910_LCD_DIV << 2) | \
|
|
(OMAP5910_ARM_DIV << 4) | \
|
|
(OMAP5910_DSP_DIV << 6) | \
|
|
(OMAP5910_TC_DIV << 8) | \
|
|
(OMAP5910_DSP_MMU_DIV << 10) | \
|
|
(OMAP5910_ARM_TIM_SEL << 12))
|
|
|
|
#endif /* __CONFIG_H */
|