u-boot/drivers/pwm/rk_pwm.c
David Wu 4ee6d51c5a pwm: rk_pwm: Make PWM driver to support all Rockchip Socs
This PWM driver can be used to support pwm functions
for on all Rockchip Socs.

The previous chips than RK3288 did not support polarity,
and register layout was different from the RK3288 PWM.

The RK3288 keep the current functions.

RK3328 and the chips after it, which can support hardware lock,
configure duty, period and polarity at next same period, to
prevent the intermediate temporary state.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-06 00:06:23 +08:00

218 lines
5.1 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2016 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
*/
#include <common.h>
#include <clk.h>
#include <div64.h>
#include <dm.h>
#include <pwm.h>
#include <regmap.h>
#include <syscon.h>
#include <asm/io.h>
#include <asm/arch-rockchip/pwm.h>
#include <power/regulator.h>
DECLARE_GLOBAL_DATA_PTR;
struct rockchip_pwm_data {
struct rockchip_pwm_regs regs;
unsigned int prescaler;
bool supports_polarity;
bool supports_lock;
u32 enable_conf;
u32 enable_conf_mask;
};
struct rk_pwm_priv {
fdt_addr_t base;
ulong freq;
u32 conf_polarity;
const struct rockchip_pwm_data *data;
};
static int rk_pwm_set_invert(struct udevice *dev, uint channel, bool polarity)
{
struct rk_pwm_priv *priv = dev_get_priv(dev);
if (!priv->data->supports_polarity) {
debug("%s: Do not support polarity\n", __func__);
return 0;
}
debug("%s: polarity=%u\n", __func__, polarity);
if (polarity)
priv->conf_polarity = PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSTIVE;
else
priv->conf_polarity = PWM_DUTY_POSTIVE | PWM_INACTIVE_NEGATIVE;
return 0;
}
static int rk_pwm_set_config(struct udevice *dev, uint channel, uint period_ns,
uint duty_ns)
{
struct rk_pwm_priv *priv = dev_get_priv(dev);
const struct rockchip_pwm_regs *regs = &priv->data->regs;
unsigned long period, duty;
u32 ctrl;
debug("%s: period_ns=%u, duty_ns=%u\n", __func__, period_ns, duty_ns);
ctrl = readl(priv->base + regs->ctrl);
/*
* Lock the period and duty of previous configuration, then
* change the duty and period, that would not be effective.
*/
if (priv->data->supports_lock) {
ctrl |= PWM_LOCK;
writel(ctrl, priv->base + regs->ctrl);
}
period = lldiv((uint64_t)priv->freq * period_ns,
priv->data->prescaler * 1000000000);
duty = lldiv((uint64_t)priv->freq * duty_ns,
priv->data->prescaler * 1000000000);
writel(period, priv->base + regs->period);
writel(duty, priv->base + regs->duty);
if (priv->data->supports_polarity) {
ctrl &= ~(PWM_DUTY_MASK | PWM_INACTIVE_MASK);
ctrl |= priv->conf_polarity;
}
/*
* Unlock and set polarity at the same time,
* the configuration of duty, period and polarity
* would be effective together at next period.
*/
if (priv->data->supports_lock)
ctrl &= ~PWM_LOCK;
writel(ctrl, priv->base + regs->ctrl);
debug("%s: period=%lu, duty=%lu\n", __func__, period, duty);
return 0;
}
static int rk_pwm_set_enable(struct udevice *dev, uint channel, bool enable)
{
struct rk_pwm_priv *priv = dev_get_priv(dev);
const struct rockchip_pwm_regs *regs = &priv->data->regs;
u32 ctrl;
debug("%s: Enable '%s'\n", __func__, dev->name);
ctrl = readl(priv->base + regs->ctrl);
ctrl &= ~priv->data->enable_conf_mask;
if (enable)
ctrl |= priv->data->enable_conf;
else
ctrl &= ~priv->data->enable_conf;
writel(ctrl, priv->base + regs->ctrl);
return 0;
}
static int rk_pwm_ofdata_to_platdata(struct udevice *dev)
{
struct rk_pwm_priv *priv = dev_get_priv(dev);
priv->base = dev_read_addr(dev);
return 0;
}
static int rk_pwm_probe(struct udevice *dev)
{
struct rk_pwm_priv *priv = dev_get_priv(dev);
struct clk clk;
int ret = 0;
ret = clk_get_by_index(dev, 0, &clk);
if (ret < 0) {
debug("%s get clock fail!\n", __func__);
return -EINVAL;
}
priv->freq = clk_get_rate(&clk);
priv->data = (struct rockchip_pwm_data *)dev_get_driver_data(dev);
if (priv->data->supports_polarity)
priv->conf_polarity = PWM_DUTY_POSTIVE | PWM_INACTIVE_POSTIVE;
return 0;
}
static const struct pwm_ops rk_pwm_ops = {
.set_invert = rk_pwm_set_invert,
.set_config = rk_pwm_set_config,
.set_enable = rk_pwm_set_enable,
};
static const struct rockchip_pwm_data pwm_data_v1 = {
.regs = {
.duty = 0x04,
.period = 0x08,
.cntr = 0x00,
.ctrl = 0x0c,
},
.prescaler = 2,
.supports_polarity = false,
.supports_lock = false,
.enable_conf = PWM_CTRL_OUTPUT_EN | PWM_CTRL_TIMER_EN,
.enable_conf_mask = BIT(1) | BIT(3),
};
static const struct rockchip_pwm_data pwm_data_v2 = {
.regs = {
.duty = 0x08,
.period = 0x04,
.cntr = 0x00,
.ctrl = 0x0c,
},
.prescaler = 1,
.supports_polarity = true,
.supports_lock = false,
.enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | RK_PWM_ENABLE |
PWM_CONTINUOUS,
.enable_conf_mask = GENMASK(2, 0) | BIT(5) | BIT(8),
};
static const struct rockchip_pwm_data pwm_data_v3 = {
.regs = {
.duty = 0x08,
.period = 0x04,
.cntr = 0x00,
.ctrl = 0x0c,
},
.prescaler = 1,
.supports_polarity = true,
.supports_lock = true,
.enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | RK_PWM_ENABLE |
PWM_CONTINUOUS,
.enable_conf_mask = GENMASK(2, 0) | BIT(5) | BIT(8),
};
static const struct udevice_id rk_pwm_ids[] = {
{ .compatible = "rockchip,rk2928-pwm", .data = (ulong)&pwm_data_v1},
{ .compatible = "rockchip,rk3288-pwm", .data = (ulong)&pwm_data_v2},
{ .compatible = "rockchip,rk3328-pwm", .data = (ulong)&pwm_data_v3},
{ }
};
U_BOOT_DRIVER(rk_pwm) = {
.name = "rk_pwm",
.id = UCLASS_PWM,
.of_match = rk_pwm_ids,
.ops = &rk_pwm_ops,
.ofdata_to_platdata = rk_pwm_ofdata_to_platdata,
.probe = rk_pwm_probe,
.priv_auto_alloc_size = sizeof(struct rk_pwm_priv),
};