leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
dc1da42f81
u-boot/common/fpga.c
eran liberty 3c735e7437 Altera Stratix II support 
Adds Support for Altera's Stratix II.

Within your board specific init file you will have to call

1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);

Altera_desc* contines (for example):
	{
	 Altera_StratixII,	/* part type */
	 passive_serial,	/* interface type */
	 1,			/* bytes of data part can accept */
	 (void *)(&funcs),	/* interface function table */
	 0L,			/* base interface address */
	 0			/* implementation specific cookie */
	 }

funcs is the interface. It is of type altera_board_specific_func.
It looks like this:
altera_board_specific_func func = {
	pre_fn,
	config_fn,
	status_fn,
	done_fn,
	clk_fn,
	data_fn,
	abort_fn,
	post_fn,
};

you will have to implement these functions, which is usually bit
banging some gpio.

Signed-off-by: Eran Liberty <liberty@extricom.com>
2008-04-13 14:52:48 -07:00

340 lines
8.4 KiB
C
Raw Blame History

/*
* (C) Copyright 2002
* Rich Ireland, Enterasys Networks, rireland@enterasys.com.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
/*
* Generic FPGA support
*/
#include <common.h> /* core U-Boot definitions */
#include <xilinx.h> /* xilinx specific definitions */
#include <altera.h> /* altera specific definitions */
#if defined(CONFIG_FPGA)
#if 0
#define FPGA_DEBUG /* define FPGA_DEBUG to get debug messages */
#endif
/* Local definitions */
#ifndef CONFIG_MAX_FPGA_DEVICES
#define CONFIG_MAX_FPGA_DEVICES 5
#endif
/* Enable/Disable debug console messages */
#ifdef FPGA_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
/* Local static data */
static ulong relocation_offset = 0;
static int next_desc = FPGA_INVALID_DEVICE;
static fpga_desc desc_table[CONFIG_MAX_FPGA_DEVICES];
/* Local static functions */
static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_get_desc( int devnum );
static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_validate( int devnum, void *buf,
size_t bsize, char *fn );
static int fpga_dev_info( int devnum );
/* ------------------------------------------------------------------------- */
/* fpga_no_sup
* 'no support' message function
*/
static void fpga_no_sup( char *fn, char *msg )
{
if ( fn && msg ) {
printf( "%s: No support for %s.\n", fn, msg);
} else if ( msg ) {
printf( "No support for %s.\n", msg);
} else {
printf( "No FPGA suport!\n");
}
}
/* fpga_get_desc
* map a device number to a descriptor
*/
static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_get_desc( int devnum )
{
fpga_desc *desc = (fpga_desc * )NULL;
if (( devnum >= 0 ) && (devnum < next_desc )) {
desc = &desc_table[devnum];
PRINTF( "%s: found fpga descriptor #%d @ 0x%p\n",
__FUNCTION__, devnum, desc );
}
return desc;
}
/* fpga_validate
* generic parameter checking code
*/
static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_validate( int devnum, void *buf,
size_t bsize, char *fn )
{
fpga_desc * desc = fpga_get_desc( devnum );
if ( !desc ) {
printf( "%s: Invalid device number %d\n", fn, devnum );
}
if ( !buf ) {
printf( "%s: Null buffer.\n", fn );
return (fpga_desc * const)NULL;
}
return desc;
}
/* fpga_dev_info
* generic multiplexing code
*/
static int fpga_dev_info( int devnum )
{
int ret_val = FPGA_FAIL; /* assume failure */
const fpga_desc * const desc = fpga_get_desc( devnum );
if ( desc ) {
PRINTF( "%s: Device Descriptor @ 0x%p\n",
__FUNCTION__, desc->devdesc );
switch ( desc->devtype ) {
case fpga_xilinx:
#if defined(CONFIG_FPGA_XILINX)
printf( "Xilinx Device\nDescriptor @ 0x%p\n", desc );
ret_val = xilinx_info( desc->devdesc );
#else
fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
#if defined(CONFIG_FPGA_ALTERA)
printf( "Altera Device\nDescriptor @ 0x%p\n", desc );
ret_val = altera_info( desc->devdesc );
#else
fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
#endif
break;
default:
printf( "%s: Invalid or unsupported device type %d\n",
__FUNCTION__, desc->devtype );
}
} else {
printf( "%s: Invalid device number %d\n",
__FUNCTION__, devnum );
}
return ret_val;
}
/* fpga_reloc
* generic multiplexing code
*/
int fpga_reloc( fpga_type devtype, void *desc, ulong reloc_off )
{
int ret_val = FPGA_FAIL;
PRINTF( "%s: Relocating Device of type %d @ 0x%p with offset %lx\n",
__FUNCTION__, devtype, desc, reloc_off );
switch ( devtype ) {
case fpga_xilinx:
#if defined(CONFIG_FPGA_XILINX)
ret_val = xilinx_reloc( desc, reloc_off );
#else
fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
#if defined(CONFIG_FPGA_ALTERA)
ret_val = altera_reloc( desc, reloc_off );
#else
fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
#endif
break;
default:
printf( "%s: Invalid or unsupported device type %d\n",
__FUNCTION__, devtype );
}
return ret_val;
}
/* ------------------------------------------------------------------------- */
/* fgpa_init is usually called from misc_init_r() and MUST be called
* before any of the other fpga functions are used.
*/
void fpga_init( ulong reloc_off )
{
relocation_offset = reloc_off;
next_desc = 0;
memset( desc_table, 0, sizeof(desc_table));
PRINTF( "%s: CONFIG_FPGA = 0x%x\n", __FUNCTION__, CONFIG_FPGA );
}
/* fpga_count
* Basic interface function to get the current number of devices available.
*/
int fpga_count( void )
{
return next_desc;
}
/* fpga_add
* Attempts to relocate the device/board specific interface code
* to the proper RAM locations and adds the device descriptor to
* the device table.
*/
int fpga_add( fpga_type devtype, void *desc )
{
int devnum = FPGA_INVALID_DEVICE;
if ( next_desc < 0 ) {
printf( "%s: FPGA support not initialized!\n", __FUNCTION__ );
} else if (( devtype > fpga_min_type ) && ( devtype < fpga_undefined )) {
if ( desc ) {
if ( next_desc < CONFIG_MAX_FPGA_DEVICES ) {
if ( fpga_reloc( devtype, desc, relocation_offset )
== FPGA_SUCCESS ) {
devnum = next_desc;
desc_table[next_desc].devtype = devtype;
desc_table[next_desc++].devdesc = desc;
} else {
printf( "%s: Unable to relocate device interface table!\n",
__FUNCTION__ );
}
} else {
printf( "%s: Exceeded Max FPGA device count\n", __FUNCTION__ );
}
} else {
printf( "%s: NULL device descriptor\n", __FUNCTION__ );
}
} else {
printf( "%s: Unsupported FPGA type %d\n", __FUNCTION__, devtype );
}
return devnum;
}
/*
* Generic multiplexing code
*/
int fpga_load( int devnum, void *buf, size_t bsize )
{
int ret_val = FPGA_FAIL; /* assume failure */
fpga_desc * desc = fpga_validate( devnum, buf, bsize, (char *)__FUNCTION__ );
if ( desc ) {
switch ( desc->devtype ) {
case fpga_xilinx:
#if defined(CONFIG_FPGA_XILINX)
ret_val = xilinx_load( desc->devdesc, buf, bsize );
#else
fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
#if defined(CONFIG_FPGA_ALTERA)
ret_val = altera_load( desc->devdesc, buf, bsize );
#else
fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
#endif
break;
default:
printf( "%s: Invalid or unsupported device type %d\n",
__FUNCTION__, desc->devtype );
}
}
return ret_val;
}
/* fpga_dump
* generic multiplexing code
*/
int fpga_dump( int devnum, void *buf, size_t bsize )
{
int ret_val = FPGA_FAIL; /* assume failure */
fpga_desc * desc = fpga_validate( devnum, buf, bsize, (char *)__FUNCTION__ );
if ( desc ) {
switch ( desc->devtype ) {
case fpga_xilinx:
#if defined(CONFIG_FPGA_XILINX)
ret_val = xilinx_dump( desc->devdesc, buf, bsize );
#else
fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
#if defined(CONFIG_FPGA_ALTERA)
ret_val = altera_dump( desc->devdesc, buf, bsize );
#else
fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
#endif
break;
default:
printf( "%s: Invalid or unsupported device type %d\n",
__FUNCTION__, desc->devtype );
}
}
return ret_val;
}
/* fpga_info
* front end to fpga_dev_info. If devnum is invalid, report on all
* available devices.
*/
int fpga_info( int devnum )
{
if ( devnum == FPGA_INVALID_DEVICE ) {
if ( next_desc > 0 ) {
int dev;
for ( dev = 0; dev < next_desc; dev++ ) {
fpga_dev_info( dev );
}
return FPGA_SUCCESS;
} else {
printf( "%s: No FPGA devices available.\n", __FUNCTION__ );
return FPGA_FAIL;
}
}
else return fpga_dev_info( devnum );
}
/* ------------------------------------------------------------------------- */
#endif /* CONFIG_FPGA */
Reference in New Issue View Git Blame Copy Permalink