u-boot/common/cmd_nvedit.c
Steven A. Falco f6a69559d6 cmd_nvedit.c: clean up syntax highlighting
My text-editor (vim) has a bit of trouble syntax-highlighting the
cmd_nvedit.c file, because it apparently does not parse C
ifdef/else/endif. The following patch does not change the behavior of
the code at all, but does allow the editor to properly
syntax-highlight the file.

Signed-off-by: Steve Falco <sfalco@harris.com>
2008-07-01 23:06:53 +02:00

637 lines
15 KiB
C

/*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Andreas Heppel <aheppel@sysgo.de>
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/**************************************************************************
*
* Support for persistent environment data
*
* The "environment" is stored as a list of '\0' terminated
* "name=value" strings. The end of the list is marked by a double
* '\0'. New entries are always added at the end. Deleting an entry
* shifts the remaining entries to the front. Replacing an entry is a
* combination of deleting the old value and adding the new one.
*
* The environment is preceeded by a 32 bit CRC over the data part.
*
**************************************************************************
*/
#include <common.h>
#include <command.h>
#include <environment.h>
#include <watchdog.h>
#include <serial.h>
#include <linux/stddef.h>
#include <asm/byteorder.h>
#if defined(CONFIG_CMD_NET)
#include <net.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
#if !defined(CFG_ENV_IS_IN_NVRAM) && \
!defined(CFG_ENV_IS_IN_EEPROM) && \
!defined(CFG_ENV_IS_IN_FLASH) && \
!defined(CFG_ENV_IS_IN_DATAFLASH) && \
!defined(CFG_ENV_IS_IN_NAND) && \
!defined(CFG_ENV_IS_IN_ONENAND) && \
!defined(CFG_ENV_IS_IN_SPI_FLASH) && \
!defined(CFG_ENV_IS_NOWHERE)
# error Define one of CFG_ENV_IS_IN_{NVRAM|EEPROM|FLASH|DATAFLASH|ONENAND|SPI_FLASH|NOWHERE}
#endif
#define XMK_STR(x) #x
#define MK_STR(x) XMK_STR(x)
/************************************************************************
************************************************************************/
/*
* Table with supported baudrates (defined in config_xyz.h)
*/
static const unsigned long baudrate_table[] = CFG_BAUDRATE_TABLE;
#define N_BAUDRATES (sizeof(baudrate_table) / sizeof(baudrate_table[0]))
/************************************************************************
* Command interface: print one or all environment variables
*/
int do_printenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int i, j, k, nxt;
int rcode = 0;
if (argc == 1) { /* Print all env variables */
for (i=0; env_get_char(i) != '\0'; i=nxt+1) {
for (nxt=i; env_get_char(nxt) != '\0'; ++nxt)
;
for (k=i; k<nxt; ++k)
putc(env_get_char(k));
putc ('\n');
if (ctrlc()) {
puts ("\n ** Abort\n");
return 1;
}
}
printf("\nEnvironment size: %d/%d bytes\n", i, ENV_SIZE);
return 0;
}
for (i=1; i<argc; ++i) { /* print single env variables */
char *name = argv[i];
k = -1;
for (j=0; env_get_char(j) != '\0'; j=nxt+1) {
for (nxt=j; env_get_char(nxt) != '\0'; ++nxt)
;
k = envmatch((uchar *)name, j);
if (k < 0) {
continue;
}
puts (name);
putc ('=');
while (k < nxt)
putc(env_get_char(k++));
putc ('\n');
break;
}
if (k < 0) {
printf ("## Error: \"%s\" not defined\n", name);
rcode ++;
}
}
return rcode;
}
/************************************************************************
* Set a new environment variable,
* or replace or delete an existing one.
*
* This function will ONLY work with a in-RAM copy of the environment
*/
int _do_setenv (int flag, int argc, char *argv[])
{
int i, len, oldval;
int console = -1;
uchar *env, *nxt = NULL;
char *name;
bd_t *bd = gd->bd;
uchar *env_data = env_get_addr(0);
if (!env_data) /* need copy in RAM */
return 1;
name = argv[1];
if (strchr(name, '=')) {
printf ("## Error: illegal character '=' in variable name \"%s\"\n", name);
return 1;
}
/*
* search if variable with this name already exists
*/
oldval = -1;
for (env=env_data; *env; env=nxt+1) {
for (nxt=env; *nxt; ++nxt)
;
if ((oldval = envmatch((uchar *)name, env-env_data)) >= 0)
break;
}
/*
* Delete any existing definition
*/
if (oldval >= 0) {
#ifndef CONFIG_ENV_OVERWRITE
/*
* Ethernet Address and serial# can be set only once,
* ver is readonly.
*/
if (
#ifdef CONFIG_HAS_UID
/* Allow serial# forced overwrite with 0xdeaf4add flag */
((strcmp (name, "serial#") == 0) && (flag != 0xdeaf4add)) ||
#else
(strcmp (name, "serial#") == 0) ||
#endif
((strcmp (name, "ethaddr") == 0)
#if defined(CONFIG_OVERWRITE_ETHADDR_ONCE) && defined(CONFIG_ETHADDR)
&& (strcmp ((char *)env_get_addr(oldval),MK_STR(CONFIG_ETHADDR)) != 0)
#endif /* CONFIG_OVERWRITE_ETHADDR_ONCE && CONFIG_ETHADDR */
) ) {
printf ("Can't overwrite \"%s\"\n", name);
return 1;
}
#endif
/* Check for console redirection */
if (strcmp(name,"stdin") == 0) {
console = stdin;
} else if (strcmp(name,"stdout") == 0) {
console = stdout;
} else if (strcmp(name,"stderr") == 0) {
console = stderr;
}
if (console != -1) {
if (argc < 3) { /* Cannot delete it! */
printf("Can't delete \"%s\"\n", name);
return 1;
}
/* Try assigning specified device */
if (console_assign (console, argv[2]) < 0)
return 1;
#ifdef CONFIG_SERIAL_MULTI
if (serial_assign (argv[2]) < 0)
return 1;
#endif
}
/*
* Switch to new baudrate if new baudrate is supported
*/
if (strcmp(argv[1],"baudrate") == 0) {
int baudrate = simple_strtoul(argv[2], NULL, 10);
int i;
for (i=0; i<N_BAUDRATES; ++i) {
if (baudrate == baudrate_table[i])
break;
}
if (i == N_BAUDRATES) {
printf ("## Baudrate %d bps not supported\n",
baudrate);
return 1;
}
printf ("## Switch baudrate to %d bps and press ENTER ...\n",
baudrate);
udelay(50000);
gd->baudrate = baudrate;
#if defined(CONFIG_PPC) || defined(CONFIG_MCF52x2)
gd->bd->bi_baudrate = baudrate;
#endif
serial_setbrg ();
udelay(50000);
for (;;) {
if (getc() == '\r')
break;
}
}
if (*++nxt == '\0') {
if (env > env_data) {
env--;
} else {
*env = '\0';
}
} else {
for (;;) {
*env = *nxt++;
if ((*env == '\0') && (*nxt == '\0'))
break;
++env;
}
}
*++env = '\0';
}
#ifdef CONFIG_NET_MULTI
if (strncmp(name, "eth", 3) == 0) {
char *end;
int num = simple_strtoul(name+3, &end, 10);
if (strcmp(end, "addr") == 0) {
eth_set_enetaddr(num, argv[2]);
}
}
#endif
/* Delete only ? */
if ((argc < 3) || argv[2] == NULL) {
env_crc_update ();
return 0;
}
/*
* Append new definition at the end
*/
for (env=env_data; *env || *(env+1); ++env)
;
if (env > env_data)
++env;
/*
* Overflow when:
* "name" + "=" + "val" +"\0\0" > ENV_SIZE - (env-env_data)
*/
len = strlen(name) + 2;
/* add '=' for first arg, ' ' for all others */
for (i=2; i<argc; ++i) {
len += strlen(argv[i]) + 1;
}
if (len > (&env_data[ENV_SIZE]-env)) {
printf ("## Error: environment overflow, \"%s\" deleted\n", name);
return 1;
}
while ((*env = *name++) != '\0')
env++;
for (i=2; i<argc; ++i) {
char *val = argv[i];
*env = (i==2) ? '=' : ' ';
while ((*++env = *val++) != '\0')
;
}
/* end is marked with double '\0' */
*++env = '\0';
/* Update CRC */
env_crc_update ();
/*
* Some variables should be updated when the corresponding
* entry in the enviornment is changed
*/
if (strcmp(argv[1],"ethaddr") == 0) {
char *s = argv[2]; /* always use only one arg */
char *e;
for (i=0; i<6; ++i) {
bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0;
if (s) s = (*e) ? e+1 : e;
}
#ifdef CONFIG_NET_MULTI
eth_set_enetaddr(0, argv[2]);
#endif
return 0;
}
if (strcmp(argv[1],"ipaddr") == 0) {
char *s = argv[2]; /* always use only one arg */
char *e;
unsigned long addr;
bd->bi_ip_addr = 0;
for (addr=0, i=0; i<4; ++i) {
ulong val = s ? simple_strtoul(s, &e, 10) : 0;
addr <<= 8;
addr |= (val & 0xFF);
if (s) s = (*e) ? e+1 : e;
}
bd->bi_ip_addr = htonl(addr);
return 0;
}
if (strcmp(argv[1],"loadaddr") == 0) {
load_addr = simple_strtoul(argv[2], NULL, 16);
return 0;
}
#if defined(CONFIG_CMD_NET)
if (strcmp(argv[1],"bootfile") == 0) {
copy_filename (BootFile, argv[2], sizeof(BootFile));
return 0;
}
#endif
#ifdef CONFIG_AMIGAONEG3SE
if (strcmp(argv[1], "vga_fg_color") == 0 ||
strcmp(argv[1], "vga_bg_color") == 0 ) {
extern void video_set_color(unsigned char attr);
extern unsigned char video_get_attr(void);
video_set_color(video_get_attr());
return 0;
}
#endif /* CONFIG_AMIGAONEG3SE */
return 0;
}
int setenv (char *varname, char *varvalue)
{
char *argv[4] = { "setenv", varname, varvalue, NULL };
if (varvalue == NULL)
return _do_setenv (0, 2, argv);
else
return _do_setenv (0, 3, argv);
}
#ifdef CONFIG_HAS_UID
void forceenv (char *varname, char *varvalue)
{
char *argv[4] = { "forceenv", varname, varvalue, NULL };
_do_setenv (0xdeaf4add, 3, argv);
}
#endif
int do_setenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
if (argc < 2) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
return _do_setenv (flag, argc, argv);
}
/************************************************************************
* Prompt for environment variable
*/
#if defined(CONFIG_CMD_ASKENV)
int do_askenv ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
extern char console_buffer[CFG_CBSIZE];
char message[CFG_CBSIZE];
int size = CFG_CBSIZE - 1;
int len;
char *local_args[4];
local_args[0] = argv[0];
local_args[1] = argv[1];
local_args[2] = NULL;
local_args[3] = NULL;
if (argc < 2) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
/* Check the syntax */
switch (argc) {
case 1:
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
case 2: /* askenv envname */
sprintf (message, "Please enter '%s':", argv[1]);
break;
case 3: /* askenv envname size */
sprintf (message, "Please enter '%s':", argv[1]);
size = simple_strtoul (argv[2], NULL, 10);
break;
default: /* askenv envname message1 ... messagen size */
{
int i;
int pos = 0;
for (i = 2; i < argc - 1; i++) {
if (pos) {
message[pos++] = ' ';
}
strcpy (message+pos, argv[i]);
pos += strlen(argv[i]);
}
message[pos] = '\0';
size = simple_strtoul (argv[argc - 1], NULL, 10);
}
break;
}
if (size >= CFG_CBSIZE)
size = CFG_CBSIZE - 1;
if (size <= 0)
return 1;
/* prompt for input */
len = readline (message);
if (size < len)
console_buffer[size] = '\0';
len = 2;
if (console_buffer[0] != '\0') {
local_args[2] = console_buffer;
len = 3;
}
/* Continue calling setenv code */
return _do_setenv (flag, len, local_args);
}
#endif
/************************************************************************
* Look up variable from environment,
* return address of storage for that variable,
* or NULL if not found
*/
char *getenv (char *name)
{
int i, nxt;
WATCHDOG_RESET();
for (i=0; env_get_char(i) != '\0'; i=nxt+1) {
int val;
for (nxt=i; env_get_char(nxt) != '\0'; ++nxt) {
if (nxt >= CFG_ENV_SIZE) {
return (NULL);
}
}
if ((val=envmatch((uchar *)name, i)) < 0)
continue;
return ((char *)env_get_addr(val));
}
return (NULL);
}
int getenv_r (char *name, char *buf, unsigned len)
{
int i, nxt;
for (i=0; env_get_char(i) != '\0'; i=nxt+1) {
int val, n;
for (nxt=i; env_get_char(nxt) != '\0'; ++nxt) {
if (nxt >= CFG_ENV_SIZE) {
return (-1);
}
}
if ((val=envmatch((uchar *)name, i)) < 0)
continue;
/* found; copy out */
n = 0;
while ((len > n++) && (*buf++ = env_get_char(val++)) != '\0')
;
if (len == n)
*buf = '\0';
return (n);
}
return (-1);
}
#if ((defined(CFG_ENV_IS_IN_NVRAM) || defined(CFG_ENV_IS_IN_EEPROM) \
|| (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_FLASH)) \
|| (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND)) \
|| (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_ONENAND))) \
&& !defined(CFG_ENV_IS_NOWHERE))
int do_saveenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
extern char * env_name_spec;
printf ("Saving Environment to %s...\n", env_name_spec);
return (saveenv() ? 1 : 0);
}
#endif
/************************************************************************
* Match a name / name=value pair
*
* s1 is either a simple 'name', or a 'name=value' pair.
* i2 is the environment index for a 'name2=value2' pair.
* If the names match, return the index for the value2, else NULL.
*/
int envmatch (uchar *s1, int i2)
{
while (*s1 == env_get_char(i2++))
if (*s1++ == '=')
return(i2);
if (*s1 == '\0' && env_get_char(i2-1) == '=')
return(i2);
return(-1);
}
/**************************************************/
U_BOOT_CMD(
printenv, CFG_MAXARGS, 1, do_printenv,
"printenv- print environment variables\n",
"\n - print values of all environment variables\n"
"printenv name ...\n"
" - print value of environment variable 'name'\n"
);
U_BOOT_CMD(
setenv, CFG_MAXARGS, 0, do_setenv,
"setenv - set environment variables\n",
"name value ...\n"
" - set environment variable 'name' to 'value ...'\n"
"setenv name\n"
" - delete environment variable 'name'\n"
);
#if ((defined(CFG_ENV_IS_IN_NVRAM) || defined(CFG_ENV_IS_IN_EEPROM) \
|| (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_FLASH)) \
|| (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_NAND)) \
|| (defined(CONFIG_CMD_ENV) && defined(CONFIG_CMD_ONENAND))) \
&& !defined(CFG_ENV_IS_NOWHERE))
U_BOOT_CMD(
saveenv, 1, 0, do_saveenv,
"saveenv - save environment variables to persistent storage\n",
NULL
);
#endif
#if defined(CONFIG_CMD_ASKENV)
U_BOOT_CMD(
askenv, CFG_MAXARGS, 1, do_askenv,
"askenv - get environment variables from stdin\n",
"name [message] [size]\n"
" - get environment variable 'name' from stdin (max 'size' chars)\n"
"askenv name\n"
" - get environment variable 'name' from stdin\n"
"askenv name size\n"
" - get environment variable 'name' from stdin (max 'size' chars)\n"
"askenv name [message] size\n"
" - display 'message' string and get environment variable 'name'"
"from stdin (max 'size' chars)\n"
);
#endif
#if defined(CONFIG_CMD_RUN)
int do_run (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
U_BOOT_CMD(
run, CFG_MAXARGS, 1, do_run,
"run - run commands in an environment variable\n",
"var [...]\n"
" - run the commands in the environment variable(s) 'var'\n"
);
#endif