a68bad0a37
Synchronise device tree with linux v5.19-rc5. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device tree we are now using the regular one for the Verdin Development (carrier) board (e.g. imx8mm-verdin-wifi-dev.dtb rather than the previous imx8mm-verdin.dtb). Please further note that the PMIC node name got changed from a pmic label to pmic@25 which required adjustment in resp. board SPL file board/toradex/verdin-imx8mm/spl.c. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
95 lines
1.7 KiB
Plaintext
95 lines
1.7 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
/*
|
|
* Copyright 2022 Toradex
|
|
*/
|
|
|
|
/ {
|
|
reg_wifi_en: regulator-wifi-en {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wifi_pwr_en>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-name = "PDn_AW-CM276NF";
|
|
startup-delay-us = <2000>;
|
|
};
|
|
};
|
|
|
|
&gpio3 {
|
|
gpio-line-names = "SODIMM_52",
|
|
"SODIMM_54",
|
|
"SODIMM_64",
|
|
"SODIMM_21",
|
|
"SODIMM_206",
|
|
"SODIMM_76",
|
|
"SODIMM_56",
|
|
"SODIMM_58",
|
|
"SODIMM_60",
|
|
"SODIMM_62",
|
|
"",
|
|
"",
|
|
"",
|
|
"",
|
|
"SODIMM_66",
|
|
"SODIMM_17",
|
|
"",
|
|
"",
|
|
"",
|
|
"SODIMM_244",
|
|
"",
|
|
"SODIMM_48",
|
|
"SODIMM_44",
|
|
"SODIMM_42",
|
|
"SODIMM_46";
|
|
};
|
|
|
|
&gpio4 {
|
|
gpio-line-names = "SODIMM_102",
|
|
"SODIMM_90",
|
|
"SODIMM_92",
|
|
"SODIMM_94",
|
|
"SODIMM_96",
|
|
"SODIMM_100",
|
|
"",
|
|
"",
|
|
"",
|
|
"",
|
|
"SODIMM_120",
|
|
"SODIMM_104",
|
|
"SODIMM_106",
|
|
"SODIMM_108",
|
|
"SODIMM_112",
|
|
"SODIMM_114",
|
|
"SODIMM_116",
|
|
"",
|
|
"SODIMM_118",
|
|
"",
|
|
"SODIMM_88",
|
|
"SODIMM_149",
|
|
"SODIMM_147",
|
|
"SODIMM_36",
|
|
"SODIMM_32",
|
|
"SODIMM_30",
|
|
"SODIMM_34",
|
|
"SODIMM_38",
|
|
"SODIMM_252",
|
|
"SODIMM_133",
|
|
"SODIMM_135",
|
|
"SODIMM_129";
|
|
};
|
|
|
|
/* On-module Wi-Fi */
|
|
&usdhc3 {
|
|
bus-width = <4>;
|
|
keep-power-in-suspend;
|
|
non-removable;
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>;
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>;
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>;
|
|
vmmc-supply = <®_wifi_en>;
|
|
status = "okay";
|
|
};
|