u-boot/include/twl6030.h
Paul Kocialkowski d7b6a75497 power: twl6030: Enable VAUX1 for eMMC power, depending on BOOT2 value
This enables the VAUX1 supply, used for eMMC power in standard configurations.
Its voltage is determined by the value of the BOOT2 pin of the TWL6030.

Note that the TWL6030 might already have enabled this regulator at startup
(depending on the value of the BOOT3 pin of the TWL6030), according to the
TWL6030 datasheet.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2016-03-15 15:10:51 -04:00

191 lines
4.7 KiB
C

/*
* (C) Copyright 2010
* Texas Instruments, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef TWL6030_H
#define TWL6030_H
#include <common.h>
#include <i2c.h>
/* I2C chip addresses */
#define TWL6030_CHIP_PM 0x48
#define TWL6030_CHIP_USB 0x49
#define TWL6030_CHIP_ADC 0x49
#define TWL6030_CHIP_CHARGER 0x49
#define TWL6030_CHIP_PWM 0x49
/* Slave Address 0x48 */
#define TWL6030_PH_STS_BOOT 0x29
#define TWL6030_PH_STS_BOOT0 (1 << 0)
#define TWL6030_PH_STS_BOOT1 (1 << 1)
#define TWL6030_PH_STS_BOOT2 (1 << 2)
#define TWL6030_PH_STS_BOOT3 (1 << 3)
#define TWL6030_VAUX1_CFG_STATE 0x86
#define TWL6030_VAUX1_CFG_VOLTAGE 0x87
#define TWL6030_VMMC_CFG_STATE 0x9A
#define TWL6030_VMMC_CFG_VOLTAGE 0x9B
#define TWL6030_VUSB_CFG_STATE 0xA2
#define TWL6030_CFG_GRP_P1 (1 << 0)
#define TWL6030_CFG_STATE_ON (1 << 0)
#define TWL6030_CFG_STATE_P1 (TWL6030_CFG_GRP_P1 << 5)
#define TWL6030_CFG_VOLTAGE_18 0x09
#define TWL6030_CFG_VOLTAGE_28 0x13
#define TWL6030_CFG_VOLTAGE_30 0x15
#define MISC1 0xE4
#define VAC_MEAS (1 << 2)
#define VBAT_MEAS (1 << 1)
#define BB_MEAS (1 << 0)
#define TWL6030_MISC2 0xE5
#define TWL6030_MISC2_VUSB_IN_VSYS (1 << 4)
/* Slave Address 0x49 */
/* Battery CHARGER REGISTERS */
#define CONTROLLER_INT_MASK 0xE0
#define CONTROLLER_CTRL1 0xE1
#define CONTROLLER_WDG 0xE2
#define CONTROLLER_STAT1 0xE3
#define CHARGERUSB_INT_STATUS 0xE4
#define CHARGERUSB_INT_MASK 0xE5
#define CHARGERUSB_STATUS_INT1 0xE6
#define CHARGERUSB_STATUS_INT2 0xE7
#define CHARGERUSB_CTRL1 0xE8
#define CHARGERUSB_CTRL2 0xE9
#define CHARGERUSB_CTRL3 0xEA
#define CHARGERUSB_STAT1 0xEB
#define CHARGERUSB_VOREG 0xEC
#define CHARGERUSB_VICHRG 0xED
#define CHARGERUSB_CINLIMIT 0xEE
#define CHARGERUSB_CTRLLIMIT1 0xEF
/* CHARGERUSB_VICHRG */
#define CHARGERUSB_VICHRG_500 0x4
#define CHARGERUSB_VICHRG_1500 0xE
/* CHARGERUSB_CINLIMIT */
#define CHARGERUSB_CIN_LIMIT_100 0x1
#define CHARGERUSB_CIN_LIMIT_300 0x5
#define CHARGERUSB_CIN_LIMIT_500 0x9
#define CHARGERUSB_CIN_LIMIT_NONE 0xF
/* CONTROLLER_INT_MASK */
#define MVAC_FAULT (1 << 6)
#define MAC_EOC (1 << 5)
#define MBAT_REMOVED (1 << 4)
#define MFAULT_WDG (1 << 3)
#define MBAT_TEMP (1 << 2)
#define MVBUS_DET (1 << 1)
#define MVAC_DET (1 << 0)
/* CHARGERUSB_INT_MASK */
#define MASK_MCURRENT_TERM (1 << 3)
#define MASK_MCHARGERUSB_STAT (1 << 2)
#define MASK_MCHARGERUSB_THMREG (1 << 1)
#define MASK_MCHARGERUSB_FAULT (1 << 0)
/* CHARGERUSB_VOREG */
#define CHARGERUSB_VOREG_3P52 0x01
#define CHARGERUSB_VOREG_4P0 0x19
#define CHARGERUSB_VOREG_4P2 0x23
#define CHARGERUSB_VOREG_4P76 0x3F
/* CHARGERUSB_CTRL1 */
#define SUSPEND_BOOT (1 << 7)
#define OPA_MODE (1 << 6)
#define HZ_MODE (1 << 5)
#define TERM (1 << 4)
/* CHARGERUSB_CTRL2 */
#define CHARGERUSB_CTRL2_VITERM_50 (0 << 5)
#define CHARGERUSB_CTRL2_VITERM_100 (1 << 5)
#define CHARGERUSB_CTRL2_VITERM_150 (2 << 5)
#define CHARGERUSB_CTRL2_VITERM_400 (7 << 5)
/* CONTROLLER_CTRL1 */
#define CONTROLLER_CTRL1_EN_CHARGER (1 << 4)
#define CONTROLLER_CTRL1_SEL_CHARGER (1 << 3)
/* CONTROLLER_STAT1 */
#define CHRG_EXTCHRG_STATZ (1 << 7)
#define CHRG_DET_N (1 << 5)
#define VAC_DET (1 << 3)
#define VBUS_DET (1 << 2)
#define FG_REG_10 0xCA
#define FG_REG_11 0xCB
#define TOGGLE1 0x90
#define FGS (1 << 5)
#define FGR (1 << 4)
#define GPADCS (1 << 1)
#define GPADCR (1 << 0)
#define CTRL_P2 0x34
#define CTRL_P2_SP2 (1 << 2)
#define CTRL_P2_EOCP2 (1 << 1)
#define CTRL_P2_BUSY (1 << 0)
#define TWL6032_CTRL_P1 0x36
#define CTRL_P1_SP1 (1 << 3)
#define GPCH0_LSB 0x57
#define GPCH0_MSB 0x58
#define TWL6032_GPCH0_LSB 0x3b
#define TWL6032_GPSELECT_ISB 0x35
#define USB_PRODUCT_ID_LSB 0x02
#define TWL6030_GPADC_VBAT_CHNL 0x07
#define TWL6032_GPADC_VBAT_CHNL 0x12
#define TWL6030_GPADC_CTRL 0x2e
#define TWL6032_GPADC_CTRL2 0x2f
#define GPADC_CTRL2_CH18_SCALER_EN (1 << 2)
#define GPADC_CTRL_SCALER_DIV4 (1 << 3)
#define TWL6030_VBAT_MULT 40 * 1000
#define TWL6032_VBAT_MULT 25 * 1000
#define TWL6030_VBAT_SHIFT (10 + 3)
#define TWL6032_VBAT_SHIFT (12 + 2)
enum twl603x_chip_type{
chip_TWL6030,
chip_TWL6032,
chip_TWL603X_cnt
};
struct twl6030_data{
u8 chip_type;
u8 adc_rbase;
u8 adc_ctrl;
u8 adc_enable;
int vbat_mult;
int vbat_shift;
};
/* Functions to read and write from TWL6030 */
static inline int twl6030_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
{
return i2c_write(chip_no, reg, 1, &val, 1);
}
static inline int twl6030_i2c_read_u8(u8 chip_no, u8 reg, u8 *val)
{
return i2c_read(chip_no, reg, 1, val, 1);
}
void twl6030_init_battery_charging(void);
void twl6030_usb_device_settings(void);
void twl6030_start_usb_charging(void);
void twl6030_stop_usb_charging(void);
int twl6030_get_battery_voltage(void);
int twl6030_get_battery_current(void);
void twl6030_power_mmc_init(void);
#endif /* TWL6030_H */