e2cae51472
Remove spi_init definition which never used on respective code since from many years. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
135 lines
3.1 KiB
C
135 lines
3.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* LPC32xx SSP interface (SPI mode)
|
|
*
|
|
* (C) Copyright 2014 DENX Software Engineering GmbH
|
|
* Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <linux/compat.h>
|
|
#include <asm/io.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <asm/arch/clk.h>
|
|
|
|
/* SSP chip registers */
|
|
struct ssp_regs {
|
|
u32 cr0;
|
|
u32 cr1;
|
|
u32 data;
|
|
u32 sr;
|
|
u32 cpsr;
|
|
u32 imsc;
|
|
u32 ris;
|
|
u32 mis;
|
|
u32 icr;
|
|
u32 dmacr;
|
|
};
|
|
|
|
/* CR1 register defines */
|
|
#define SSP_CR1_SSP_ENABLE 0x0002
|
|
|
|
/* SR register defines */
|
|
#define SSP_SR_TNF 0x0002
|
|
/* SSP status RX FIFO not empty bit */
|
|
#define SSP_SR_RNE 0x0004
|
|
|
|
/* lpc32xx spi slave */
|
|
struct lpc32xx_spi_slave {
|
|
struct spi_slave slave;
|
|
struct ssp_regs *regs;
|
|
};
|
|
|
|
static inline struct lpc32xx_spi_slave *to_lpc32xx_spi_slave(
|
|
struct spi_slave *slave)
|
|
{
|
|
return container_of(slave, struct lpc32xx_spi_slave, slave);
|
|
}
|
|
|
|
/* the following is called in sequence by do_spi_xfer() */
|
|
|
|
struct spi_slave *spi_setup_slave(uint bus, uint cs, uint max_hz, uint mode)
|
|
{
|
|
struct lpc32xx_spi_slave *lslave;
|
|
|
|
/* we only set up SSP0 for now, so ignore bus */
|
|
|
|
if (mode & SPI_3WIRE) {
|
|
pr_err("3-wire mode not supported");
|
|
return NULL;
|
|
}
|
|
|
|
if (mode & SPI_SLAVE) {
|
|
pr_err("slave mode not supported\n");
|
|
return NULL;
|
|
}
|
|
|
|
if (mode & SPI_PREAMBLE) {
|
|
pr_err("preamble byte skipping not supported\n");
|
|
return NULL;
|
|
}
|
|
|
|
lslave = spi_alloc_slave(struct lpc32xx_spi_slave, bus, cs);
|
|
if (!lslave) {
|
|
printf("SPI_error: Fail to allocate lpc32xx_spi_slave\n");
|
|
return NULL;
|
|
}
|
|
|
|
lslave->regs = (struct ssp_regs *)SSP0_BASE;
|
|
|
|
/*
|
|
* 8 bit frame, SPI fmt, 500kbps -> clock divider is 26.
|
|
* Set SCR to 0 and CPSDVSR to 26.
|
|
*/
|
|
|
|
writel(0x7, &lslave->regs->cr0); /* 8-bit chunks, SPI, 1 clk/bit */
|
|
writel(26, &lslave->regs->cpsr); /* SSP clock = HCLK/26 = 500kbps */
|
|
writel(0, &lslave->regs->imsc); /* do not raise any interrupts */
|
|
writel(0, &lslave->regs->icr); /* clear any pending interrupt */
|
|
writel(0, &lslave->regs->dmacr); /* do not do DMAs */
|
|
writel(SSP_CR1_SSP_ENABLE, &lslave->regs->cr1); /* enable SSP0 */
|
|
return &lslave->slave;
|
|
}
|
|
|
|
void spi_free_slave(struct spi_slave *slave)
|
|
{
|
|
struct lpc32xx_spi_slave *lslave = to_lpc32xx_spi_slave(slave);
|
|
|
|
debug("(lpc32xx) spi_free_slave: 0x%08x\n", (u32)lslave);
|
|
free(lslave);
|
|
}
|
|
|
|
int spi_claim_bus(struct spi_slave *slave)
|
|
{
|
|
/* only one bus and slave so far, always available */
|
|
return 0;
|
|
}
|
|
|
|
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct lpc32xx_spi_slave *lslave = to_lpc32xx_spi_slave(slave);
|
|
int bytelen = bitlen >> 3;
|
|
int idx_out = 0;
|
|
int idx_in = 0;
|
|
int start_time;
|
|
|
|
start_time = get_timer(0);
|
|
while ((idx_out < bytelen) || (idx_in < bytelen)) {
|
|
int status = readl(&lslave->regs->sr);
|
|
if ((idx_out < bytelen) && (status & SSP_SR_TNF))
|
|
writel(((u8 *)dout)[idx_out++], &lslave->regs->data);
|
|
if ((idx_in < bytelen) && (status & SSP_SR_RNE))
|
|
((u8 *)din)[idx_in++] = readl(&lslave->regs->data);
|
|
if (get_timer(start_time) >= CONFIG_LPC32XX_SSP_TIMEOUT)
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void spi_release_bus(struct spi_slave *slave)
|
|
{
|
|
/* do nothing */
|
|
}
|