u-boot/include/configs/lp8x4x.h
Tom Rini 7f673c99c2 Merge branch 'master' of git://git.denx.de/u-boot-arm
Bringing in the MMC tree means that CONFIG_BOUNCE_BUFFER needed to be
added to include/configs/exynos5-dt.h now.

Conflicts:
	include/configs/exynos5250-dt.h

Signed-off-by: Tom Rini <trini@ti.com>
2014-01-10 10:56:00 -05:00

242 lines
5.9 KiB
C

/*
* ICP DAS LP-8x4x configuration file
*
* Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Board Configuration Options
*/
#define CONFIG_CPU_PXA27X /* Marvell PXA270 CPU */
#define MACH_TYPE_LP8X4X 4539 /* ICP DAS LP-8x4x */
#define CONFIG_MACH_TYPE MACH_TYPE_LP8X4X
#define CONFIG_SYS_TEXT_BASE 0x00000000
#define CONFIG_SYS_MALLOC_LEN (128*1024)
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOOTCOMMAND \
"bootm 80000 - 240000;"
#define CONFIG_BOOTARGS \
"console=ttyS0,115200 mem=128M root=/dev/mmcblk0p1 rw" \
"init=/sbin/init rootfstype=ext4 rootwait"
#define CONFIG_TIMESTAMP
#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_LZMA /* LZMA compression support */
#define CONFIG_OF_LIBFDT
/*
* Serial Console Configuration
*/
#define CONFIG_PXA_SERIAL
#define CONFIG_FFUART 1
#define CONFIG_CONS_INDEX 3
#define CONFIG_BAUDRATE 115200
/*
* Bootloader Components Configuration
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_NET
#define CONFIG_CMD_ENV
#undef CONFIG_CMD_IMLS
#define CONFIG_CMD_MMC
#define CONFIG_CMD_USB
#undef CONFIG_LCD
#undef CONFIG_CMD_IDE
/*
* Networking Configuration
* chip on the ICPDAS LINPAC board
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_DRIVER_DM9000 1
#define CONFIG_DM9000_BASE 0x0C000000
#define DM9000_IO 0x0C000000
#define DM9000_DATA 0x0C004000
#define DM9000_IO_2 0x0D000000
#define DM9000_DATA_2 0x0D004000
#define CONFIG_NET_RETRY_COUNT 10
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#endif
/*
* MMC Card Configuration
*/
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_PXA_MMC_GENERIC
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
#define CONFIG_DOS_PARTITION
#endif
/*
* KGDB
*/
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */
#endif
/*
* HUSH Shell Configuration
*/
#define CONFIG_SYS_HUSH_PARSER 1
#define CONFIG_SYS_LONGHELP
#ifdef CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT "$ "
#else
#endif
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_DEVICE_NULLDEV 1
#define CONFIG_CMDLINE_EDITING 1
#define CONFIG_AUTO_COMPLETE 1
/*
* DRAM Map
*/
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
#define CONFIG_SYS_DRAM_SIZE 0x08000000 /* 128 MB DRAM */
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0xa0008000
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
/* Use first 64kb bank of the internal SRAM */
#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000
/*
* NOR FLASH
*/
#define CONFIG_SYS_MONITOR_BASE 0x0
#define CONFIG_SYS_MONITOR_LEN 0x40000
#define CONFIG_ENV_ADDR \
(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_SIZE 0x40000
#define CONFIG_ENV_SECT_SIZE 0x40000
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255)
#define CONFIG_SYS_MAX_FLASH_BANKS 2
#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
#define CONFIG_SYS_FLASH_PROTECTION 1
#define CONFIG_ENV_IS_IN_FLASH 1
/*
* GPIO settings
*/
#define CONFIG_SYS_GPSR0_VAL 0x0808c014
#define CONFIG_SYS_GPSR1_VAL 0x00cf0002
#define CONFIG_SYS_GPSR2_VAL 0x0221c000
#define CONFIG_SYS_GPSR3_VAL 0x00020000
#define CONFIG_SYS_GPCR0_VAL 0x00000000
#define CONFIG_SYS_GPCR1_VAL 0x0000ab80
#define CONFIG_SYS_GPCR2_VAL 0x00100000
#define CONFIG_SYS_GPCR3_VAL 0x0
#define CONFIG_SYS_GPDR0_VAL 0xc0e9ddf4
#define CONFIG_SYS_GPDR1_VAL 0xfcffab83
#define CONFIG_SYS_GPDR2_VAL 0x02f1ffff
#define CONFIG_SYS_GPDR3_VAL 0x00021b81
#define CONFIG_SYS_GAFR0_L_VAL 0x80000000
#define CONFIG_SYS_GAFR0_U_VAL 0xa5e54018
#define CONFIG_SYS_GAFR1_L_VAL 0x999a955a
#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a00a
#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
#define CONFIG_SYS_GAFR2_U_VAL 0x55f9a402
#define CONFIG_SYS_GAFR3_L_VAL 0x540a950c
#define CONFIG_SYS_GAFR3_U_VAL 0x00001599
#define CONFIG_SYS_PSSR_VAL 0x32
/*
* Clock settings
*/
#define CONFIG_SYS_CKEN 0x005002c0
#define CONFIG_SYS_CCCR 0x02000290
#define CONFIG_SYS_CLKCFG 0x0000000b
/*
* Memory settings
*/
#define CONFIG_SYS_MSC0_VAL 0x2bd8aad2
#define CONFIG_SYS_MSC1_VAL 0xb8c9b8dc
#define CONFIG_SYS_MSC2_VAL 0xfff9b8c9
#define CONFIG_SYS_FLYCNFG_VAL 0x00010001
#define CONFIG_SYS_MDREFR_VAL 0x2093e018
#define CONFIG_SYS_MDCNFG_VAL 0x890009d1
#define CONFIG_SYS_MDMRS_VAL 0x00220022
#define CONFIG_SYS_SXCNFG_VAL 0x40044004
/*
* PCMCIA and CF Interfaces
*/
#define CONFIG_SYS_MECR_VAL 0x00000001
#define CONFIG_SYS_MCMEM0_VAL 0x0000c497
#define CONFIG_SYS_MCMEM1_VAL 0x0000c497
#define CONFIG_SYS_MCATT0_VAL 0x0000c497
#define CONFIG_SYS_MCATT1_VAL 0x0000c497
#define CONFIG_SYS_MCIO0_VAL 0x00008407
#define CONFIG_SYS_MCIO1_VAL 0x00008407
/*
* LCD
*/
#ifdef CONFIG_LCD
#define CONFIG_VOIPAC_LCD
#endif
/*
* USB
*/
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_OHCI_NEW
#define CONFIG_SYS_USB_OHCI_BOARD_INIT
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "lp8x4x"
#define CONFIG_USB_STORAGE
#endif
#endif /* __CONFIG_H */