leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d32211ee95
u-boot/drivers/serial/serial_pxa.c
Simon Glass 401d1c4f5d common: Drop asm/global_data.h from common header 
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00

344 lines
7.8 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
*
* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Alex Zuepke <azu@sysgo.de>
*
* Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
*
* Modified to add driver model (DM) support
* (C) Copyright 2016 Marcel Ziswiler <marcel.ziswiler@toradex.com>
*/
#include <common.h>
#include <hang.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/regs-uart.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <dm.h>
#include <dm/platform_data/serial_pxa.h>
#include <linux/compiler.h>
#include <serial.h>
#include <watchdog.h>
DECLARE_GLOBAL_DATA_PTR;
static uint32_t pxa_uart_get_baud_divider(int baudrate)
{
return 921600 / baudrate;
}
static void pxa_uart_toggle_clock(uint32_t uart_index, int enable)
{
uint32_t clk_reg, clk_offset, reg;
clk_reg = UART_CLK_REG;
clk_offset = UART_CLK_BASE << uart_index;
reg = readl(clk_reg);
if (enable)
reg |= clk_offset;
else
reg &= ~clk_offset;
writel(reg, clk_reg);
}
/*
* Enable clock and set baud rate, parity etc.
*/
void pxa_setbrg_common(struct pxa_uart_regs *uart_regs, int port, int baudrate)
{
uint32_t divider = pxa_uart_get_baud_divider(baudrate);
if (!divider)
hang();
pxa_uart_toggle_clock(port, 1);
/* Disable interrupts and FIFOs */
writel(0, &uart_regs->ier);
writel(0, &uart_regs->fcr);
/* Set baud rate */
writel(LCR_WLS0 | LCR_WLS1 | LCR_DLAB, &uart_regs->lcr);
writel(divider & 0xff, &uart_regs->dll);
writel(divider >> 8, &uart_regs->dlh);
writel(LCR_WLS0 | LCR_WLS1, &uart_regs->lcr);
/* Enable UART */
writel(IER_UUE, &uart_regs->ier);
}
#ifndef CONFIG_DM_SERIAL
static struct pxa_uart_regs *pxa_uart_index_to_regs(uint32_t uart_index)
{
switch (uart_index) {
case FFUART_INDEX: return (struct pxa_uart_regs *)FFUART_BASE;
case BTUART_INDEX: return (struct pxa_uart_regs *)BTUART_BASE;
case STUART_INDEX: return (struct pxa_uart_regs *)STUART_BASE;
case HWUART_INDEX: return (struct pxa_uart_regs *)HWUART_BASE;
default:
return NULL;
}
}
/*
* Enable clock and set baud rate, parity etc.
*/
void pxa_setbrg_dev(uint32_t uart_index)
{
struct pxa_uart_regs *uart_regs = pxa_uart_index_to_regs(uart_index);
if (!uart_regs)
panic("Failed getting UART registers\n");
pxa_setbrg_common(uart_regs, uart_index, gd->baudrate);
}
/*
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
*/
int pxa_init_dev(unsigned int uart_index)
{
pxa_setbrg_dev(uart_index);
return 0;
}
/*
* Output a single byte to the serial port.
*/
void pxa_putc_dev(unsigned int uart_index, const char c)
{
struct pxa_uart_regs *uart_regs;
/* If \n, also do \r */
if (c == '\n')
pxa_putc_dev(uart_index, '\r');
uart_regs = pxa_uart_index_to_regs(uart_index);
if (!uart_regs)
hang();
while (!(readl(&uart_regs->lsr) & LSR_TEMT))
WATCHDOG_RESET();
writel(c, &uart_regs->thr);
}
/*
* Read a single byte from the serial port. Returns 1 on success, 0
* otherwise. When the function is succesfull, the character read is
* written into its argument c.
*/
int pxa_tstc_dev(unsigned int uart_index)
{
struct pxa_uart_regs *uart_regs;
uart_regs = pxa_uart_index_to_regs(uart_index);
if (!uart_regs)
return -1;
return readl(&uart_regs->lsr) & LSR_DR;
}
/*
* Read a single byte from the serial port. Returns 1 on success, 0
* otherwise. When the function is succesfull, the character read is
* written into its argument c.
*/
int pxa_getc_dev(unsigned int uart_index)
{
struct pxa_uart_regs *uart_regs;
uart_regs = pxa_uart_index_to_regs(uart_index);
if (!uart_regs)
return -1;
while (!(readl(&uart_regs->lsr) & LSR_DR))
WATCHDOG_RESET();
return readl(&uart_regs->rbr) & 0xff;
}
void pxa_puts_dev(unsigned int uart_index, const char *s)
{
while (*s)
pxa_putc_dev(uart_index, *s++);
}
#define pxa_uart(uart, UART) \
int uart##_init(void) \
{ \
return pxa_init_dev(UART##_INDEX); \
} \
\
void uart##_setbrg(void) \
{ \
return pxa_setbrg_dev(UART##_INDEX); \
} \
\
void uart##_putc(const char c) \
{ \
return pxa_putc_dev(UART##_INDEX, c); \
} \
\
void uart##_puts(const char *s) \
{ \
return pxa_puts_dev(UART##_INDEX, s); \
} \
\
int uart##_getc(void) \
{ \
return pxa_getc_dev(UART##_INDEX); \
} \
\
int uart##_tstc(void) \
{ \
return pxa_tstc_dev(UART##_INDEX); \
} \
#define pxa_uart_desc(uart) \
struct serial_device serial_##uart##_device = \
{ \
.name = "serial_"#uart, \
.start = uart##_init, \
.stop = NULL, \
.setbrg = uart##_setbrg, \
.getc = uart##_getc, \
.tstc = uart##_tstc, \
.putc = uart##_putc, \
.puts = uart##_puts, \
};
#define pxa_uart_multi(uart, UART) \
pxa_uart(uart, UART) \
pxa_uart_desc(uart)
#if defined(CONFIG_HWUART)
pxa_uart_multi(hwuart, HWUART)
#endif
#if defined(CONFIG_STUART)
pxa_uart_multi(stuart, STUART)
#endif
#if defined(CONFIG_FFUART)
pxa_uart_multi(ffuart, FFUART)
#endif
#if defined(CONFIG_BTUART)
pxa_uart_multi(btuart, BTUART)
#endif
__weak struct serial_device *default_serial_console(void)
{
#if CONFIG_CONS_INDEX == 1
return &serial_hwuart_device;
#elif CONFIG_CONS_INDEX == 2
return &serial_stuart_device;
#elif CONFIG_CONS_INDEX == 3
return &serial_ffuart_device;
#elif CONFIG_CONS_INDEX == 4
return &serial_btuart_device;
#else
#error "Bad CONFIG_CONS_INDEX."
#endif
}
void pxa_serial_initialize(void)
{
#if defined(CONFIG_FFUART)
serial_register(&serial_ffuart_device);
#endif
#if defined(CONFIG_BTUART)
serial_register(&serial_btuart_device);
#endif
#if defined(CONFIG_STUART)
serial_register(&serial_stuart_device);
#endif
}
#endif /* CONFIG_DM_SERIAL */
#ifdef CONFIG_DM_SERIAL
static int pxa_serial_probe(struct udevice *dev)
{
struct pxa_serial_plat *plat = dev_get_plat(dev);
pxa_setbrg_common((struct pxa_uart_regs *)plat->base, plat->port,
plat->baudrate);
return 0;
}
static int pxa_serial_putc(struct udevice *dev, const char ch)
{
struct pxa_serial_plat *plat = dev_get_plat(dev);
struct pxa_uart_regs *uart_regs = (struct pxa_uart_regs *)plat->base;
/* Wait for last character to go. */
if (!(readl(&uart_regs->lsr) & LSR_TEMT))
return -EAGAIN;
writel(ch, &uart_regs->thr);
return 0;
}
static int pxa_serial_getc(struct udevice *dev)
{
struct pxa_serial_plat *plat = dev_get_plat(dev);
struct pxa_uart_regs *uart_regs = (struct pxa_uart_regs *)plat->base;
/* Wait for a character to arrive. */
if (!(readl(&uart_regs->lsr) & LSR_DR))
return -EAGAIN;
return readl(&uart_regs->rbr) & 0xff;
}
int pxa_serial_setbrg(struct udevice *dev, int baudrate)
{
struct pxa_serial_plat *plat = dev_get_plat(dev);
struct pxa_uart_regs *uart_regs = (struct pxa_uart_regs *)plat->base;
int port = plat->port;
pxa_setbrg_common(uart_regs, port, baudrate);
return 0;
}
static int pxa_serial_pending(struct udevice *dev, bool input)
{
struct pxa_serial_plat *plat = dev_get_plat(dev);
struct pxa_uart_regs *uart_regs = (struct pxa_uart_regs *)plat->base;
if (input)
return readl(&uart_regs->lsr) & LSR_DR ? 1 : 0;
else
return readl(&uart_regs->lsr) & LSR_TEMT ? 0 : 1;
return 0;
}
static const struct dm_serial_ops pxa_serial_ops = {
.putc = pxa_serial_putc,
.pending = pxa_serial_pending,
.getc = pxa_serial_getc,
.setbrg = pxa_serial_setbrg,
};
U_BOOT_DRIVER(serial_pxa) = {
.name = "serial_pxa",
.id = UCLASS_SERIAL,
.probe = pxa_serial_probe,
.ops = &pxa_serial_ops,
.flags = DM_FLAG_PRE_RELOC,
};
#endif /* CONFIG_DM_SERIAL */
Reference in New Issue View Git Blame Copy Permalink