u-boot/include/configs/apx4devkit.h
Tom Rini 86cf1c8285 configs: Migrate CONFIG_NR_DRAM_BANKS
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
  CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
  2), set this to 8.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-16 16:45:02 -04:00

94 lines
2.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2012 Bluegiga Technologies Oy
*
* Authors:
* Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
* Lauri Hintsala <lauri.hintsala@bluegiga.com>
*
* Based on m28evk.h:
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*/
#ifndef __CONFIGS_APX4DEVKIT_H__
#define __CONFIGS_APX4DEVKIT_H__
/* System configurations */
#define CONFIG_MACH_TYPE MACH_TYPE_APX4DEVKIT
/* Memory configuration */
#define PHYS_SDRAM_1 0x40000000 /* Base address */
#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
/* Environment */
#define CONFIG_ENV_OVERWRITE
/* Environment is in MMC */
#if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_ENV_OFFSET (256 * 1024)
#define CONFIG_ENV_SIZE (16 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV 0
#endif
/* Environment is in NAND */
#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
#define CONFIG_ENV_SIZE (128 * 1024)
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
#define CONFIG_ENV_RANGE (384 * 1024)
#define CONFIG_ENV_OFFSET 0x120000
#define CONFIG_ENV_OFFSET_REDUND \
(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
#endif
/* UBI and NAND partitioning */
/* FEC Ethernet on SoC */
#ifdef CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_ETHPRIME "FEC"
#define CONFIG_FEC_MXC_PHYADDR 0
#define IMX_FEC_BASE MXS_ENET0_BASE
#endif
/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_EHCI_MXS_PORT1
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#endif
/* Boot Linux */
#define CONFIG_BOOTFILE "uImage"
#define CONFIG_BOOTCOMMAND "run bootcmd_nand"
#define CONFIG_LOADADDR 0x41000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SERIAL_TAG
#define CONFIG_REVISION_TAG
/* Extra Environments */
#define CONFIG_EXTRA_ENV_SETTINGS \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"verify=no\0" \
"bootcmd=run bootcmd_nand\0" \
"kernelargs=console=tty0 console=ttyAMA0,115200 consoleblank=0\0" \
"bootargs_nand=" \
"setenv bootargs ${kernelargs} ubi.mtd=3,2048 " \
"root=ubi0:rootfs rootfstype=ubifs ${mtdparts} rw\0" \
"bootcmd_nand=" \
"run bootargs_nand && ubi part root 2048 && " \
"ubifsmount ubi:rootfs && ubifsload 41000000 boot/uImage && " \
"bootm 41000000\0" \
"bootargs_mmc=" \
"setenv bootargs ${kernelargs} " \
"root=/dev/mmcblk0p2 rootwait ${mtdparts} rw\0" \
"bootcmd_mmc=" \
"run bootargs_mmc && mmc rescan && " \
"ext2load mmc 0:2 41000000 boot/uImage && bootm 41000000\0" \
""
/* The rest of the configuration is shared */
#include <configs/mxs.h>
#endif /* __CONFIGS_APX4DEVKIT_H__ */