u-boot/doc/README.TQM8260
wdenk 8bde7f776c * Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)
2003-06-27 21:31:46 +00:00

416 lines
18 KiB
Plaintext

This file contains basic information on the port of U-Boot to TQM8260.
All the changes fit in the common U-Boot infrastructure, providing a
new TQM8260-specific entry in makefiles. To build U-Boot for TQM8260,
type "make TQM8260_config", edit the "include/config_TQM8260.h" file
if necessary, then type "make".
Common file modifications:
--------------------------
The following common files have been modified by this project:
(starting from the ppcboot-0.9.3/ directory)
MAKEALL - TQM8260 entry added
Makefile - TQM8260_config entry added
cpu/mpc8260/Makefile - soft_i2c.o module added
cpu/mpc8260/ether_scc.c - TQM8260-specific definitions added, an obvious
bug fixed (fcr -> scr)
cpu/mpc8260/ether_fcc.c - TQM8260-specific definitions added
include/flash.h - added definitions for the AM29LV640D Flash chip
New files:
----------
The following new files have been added by this project:
(starting from the ppcboot-0.9.3/ directory)
board/tqm8260/ - board-specific directory
board/tqm8260/Makefile - board-specific makefile
board/tqm8260/config.mk - config file
board/tqm8260/flash.c - flash driver (for AM29LV640D)
board/tqm8260/ppcboot.lds - linker script
board/tqm8260/tqm8260.c - ioport and memory initialization
cpu/mpc8260/soft_i2c.c - software i2c EEPROM driver
include/config_TQM8260.h - main configuration file
New configuration options:
--------------------------
CONFIG_TQM8260
Main board-specific option (should be defined for TQM8260).
CONFIG_82xx_CONS_SMC1
If defined, SMC1 will be used as the console
CONFIG_82xx_CONS_SMC2
If defined, SMC2 will be used as the console
CFG_INIT_LOCAL_SDRAM
If defined, the SDRAM on the local bus will be initialized and
mapped at BR2.
Acceptance criteria tests:
--------------------------
The following tests have been conducted to validate the port of U-Boot
to TQM8260:
1. Operation on serial console:
With the CONFIG_82xx_CONS_SMC1 option defined in the main configuration file,
the U-Boot output appeared on the serial terminal connected to COM1 as
follows:
------------------------------------------------------------------------------
=> help
go - start application at address 'addr'
run - run commands in an environment variable
bootm - boot application image from memory
bootp - boot image via network using BootP/TFTP protocol
tftpboot- boot image via network using TFTP protocol
and env variables ipaddr and serverip
rarpboot- boot image via network using RARP/TFTP protocol
bootd - boot default, i.e., run 'bootcmd'
loads - load S-Record file over serial line
loadb - load binary file over serial line (kermit mode)
md - memory display
mm - memory modify (auto-incrementing)
nm - memory modify (constant address)
mw - memory write (fill)
cp - memory copy
cmp - memory compare
crc32 - checksum calculation
base - print or set address offset
printenv- print environment variables
setenv - set environment variables
saveenv - save environment variables to persistent storage
protect - enable or disable FLASH write protection
erase - erase FLASH memory
flinfo - print FLASH memory information
bdinfo - print Board Info structure
iminfo - print header information for application image
coninfo - print console devices and informations
eeprom - EEPROM sub-system
loop - infinite loop on address range
mtest - simple RAM test
icache - enable or disable instruction cache
dcache - enable or disable data cache
reset - Perform RESET of the CPU
echo - echo args to console
version - print monitor version
help - print online help
? - alias for 'help'
=>
------------------------------------------------------------------------------
2. Flash driver operation
The following sequence was performed to test the "flinfo" command:
------------------------------------------------------------------------------
=> flinfo
Bank # 1: AMD 29LV640D (64 M, uniform sector)
Size: 32 MB in 128 Sectors
Sector Start Addresses:
40000000 40040000 (RO) 40080000 400C0000 40100000
40140000 40180000 401C0000 40200000 40240000
40280000 402C0000 40300000 40340000 40380000
403C0000 40400000 40440000 40480000 404C0000
40500000 40540000 40580000 405C0000 40600000
40640000 40680000 406C0000 40700000 40740000
40780000 407C0000 40800000 40840000 40880000
408C0000 40900000 40940000 40980000 409C0000
40A00000 40A40000 40A80000 40AC0000 40B00000
40B40000 40B80000 40BC0000 40C00000 40C40000
40C80000 40CC0000 40D00000 40D40000 40D80000
40DC0000 40E00000 40E40000 40E80000 40EC0000
40F00000 40F40000 40F80000 40FC0000 41000000
41040000 41080000 410C0000 41100000 41140000
41180000 411C0000 41200000 41240000 41280000
412C0000 41300000 41340000 41380000 413C0000
41400000 41440000 41480000 414C0000 41500000
41540000 41580000 415C0000 41600000 41640000
41680000 416C0000 41700000 41740000 41780000
417C0000 41800000 41840000 41880000 418C0000
41900000 41940000 41980000 419C0000 41A00000
41A40000 41A80000 41AC0000 41B00000 41B40000
41B80000 41BC0000 41C00000 41C40000 41C80000
41CC0000 41D00000 41D40000 41D80000 41DC0000
41E00000 41E40000 41E80000 41EC0000 41F00000
41F40000 41F80000 41FC0000
=>
------------------------------------------------------------------------------
The following sequence was performed to test the erase command:
------------------------------------------------------------------------------
=> cp 0 40080000 10
Copy to Flash... done
=> erase 40080000 400bffff
Erase Flash from 0x40080000 to 0x400bffff
.. done
Erased 1 sectors
=> md 40080000
40080000: ffffffff ffffffff ffffffff ffffffff ................
40080010: ffffffff ffffffff ffffffff ffffffff ................
40080020: ffffffff ffffffff ffffffff ffffffff ................
40080030: ffffffff ffffffff ffffffff ffffffff ................
40080040: ffffffff ffffffff ffffffff ffffffff ................
40080050: ffffffff ffffffff ffffffff ffffffff ................
40080060: ffffffff ffffffff ffffffff ffffffff ................
40080070: ffffffff ffffffff ffffffff ffffffff ................
40080080: ffffffff ffffffff ffffffff ffffffff ................
40080090: ffffffff ffffffff ffffffff ffffffff ................
400800a0: ffffffff ffffffff ffffffff ffffffff ................
400800b0: ffffffff ffffffff ffffffff ffffffff ................
400800c0: ffffffff ffffffff ffffffff ffffffff ................
400800d0: ffffffff ffffffff ffffffff ffffffff ................
400800e0: ffffffff ffffffff ffffffff ffffffff ................
400800f0: ffffffff ffffffff ffffffff ffffffff ................
=> cp 0 40080000 10
Copy to Flash... done
=> erase 1:2
Erase Flash Sectors 2-2 in Bank # 1
.. done
=> md 40080000
40080000: ffffffff ffffffff ffffffff ffffffff ................
40080010: ffffffff ffffffff ffffffff ffffffff ................
40080020: ffffffff ffffffff ffffffff ffffffff ................
40080030: ffffffff ffffffff ffffffff ffffffff ................
40080040: ffffffff ffffffff ffffffff ffffffff ................
40080050: ffffffff ffffffff ffffffff ffffffff ................
40080060: ffffffff ffffffff ffffffff ffffffff ................
40080070: ffffffff ffffffff ffffffff ffffffff ................
40080080: ffffffff ffffffff ffffffff ffffffff ................
40080090: ffffffff ffffffff ffffffff ffffffff ................
400800a0: ffffffff ffffffff ffffffff ffffffff ................
400800b0: ffffffff ffffffff ffffffff ffffffff ................
400800c0: ffffffff ffffffff ffffffff ffffffff ................
400800d0: ffffffff ffffffff ffffffff ffffffff ................
400800e0: ffffffff ffffffff ffffffff ffffffff ................
400800f0: ffffffff ffffffff ffffffff ffffffff ................
=> cp 0 40080000 10
Copy to Flash... done
=> cp 0 400c0000 10
Copy to Flash... done
=> erase 1:2-3
Erase Flash Sectors 2-3 in Bank # 1
... done
=> md 40080000
40080000: ffffffff ffffffff ffffffff ffffffff ................
40080010: ffffffff ffffffff ffffffff ffffffff ................
40080020: ffffffff ffffffff ffffffff ffffffff ................
40080030: ffffffff ffffffff ffffffff ffffffff ................
40080040: ffffffff ffffffff ffffffff ffffffff ................
40080050: ffffffff ffffffff ffffffff ffffffff ................
40080060: ffffffff ffffffff ffffffff ffffffff ................
40080070: ffffffff ffffffff ffffffff ffffffff ................
40080080: ffffffff ffffffff ffffffff ffffffff ................
40080090: ffffffff ffffffff ffffffff ffffffff ................
400800a0: ffffffff ffffffff ffffffff ffffffff ................
400800b0: ffffffff ffffffff ffffffff ffffffff ................
400800c0: ffffffff ffffffff ffffffff ffffffff ................
400800d0: ffffffff ffffffff ffffffff ffffffff ................
400800e0: ffffffff ffffffff ffffffff ffffffff ................
400800f0: ffffffff ffffffff ffffffff ffffffff ................
=> md 400c0000
400c0000: ffffffff ffffffff ffffffff ffffffff ................
400c0010: ffffffff ffffffff ffffffff ffffffff ................
400c0020: ffffffff ffffffff ffffffff ffffffff ................
400c0030: ffffffff ffffffff ffffffff ffffffff ................
400c0040: ffffffff ffffffff ffffffff ffffffff ................
400c0050: ffffffff ffffffff ffffffff ffffffff ................
400c0060: ffffffff ffffffff ffffffff ffffffff ................
400c0070: ffffffff ffffffff ffffffff ffffffff ................
400c0080: ffffffff ffffffff ffffffff ffffffff ................
400c0090: ffffffff ffffffff ffffffff ffffffff ................
400c00a0: ffffffff ffffffff ffffffff ffffffff ................
400c00b0: ffffffff ffffffff ffffffff ffffffff ................
400c00c0: ffffffff ffffffff ffffffff ffffffff ................
400c00d0: ffffffff ffffffff ffffffff ffffffff ................
400c00e0: ffffffff ffffffff ffffffff ffffffff ................
400c00f0: ffffffff ffffffff ffffffff ffffffff ................
=>
------------------------------------------------------------------------------
The following sequence was performed to test the Flash programming commands:
------------------------------------------------------------------------------
=> erase 40080000 400bffff
Erase Flash from 0x40080000 to 0x400bffff
.. done
Erased 1 sectors
=> cp 0 40080000 10
Copy to Flash... done
=> md 0
00000000: 00000000 00000104 61100200 01000000 ........a.......
00000010: 00000000 00000000 81140000 82000100 ................
00000020: 01080000 00004000 22800000 00000600 ......@.".......
00000030: 00200800 00000000 10000100 00008000 . ..............
00000040: 00812000 00000200 00020000 80000000 .. .............
00000050: 00028001 00001000 00040400 00000200 ................
00000060: 20480000 00000000 20090000 00142000 H...... ..... .
00000070: 00000000 00004000 24210000 10000000 ......@.$!......
00000080: 02440002 10000000 00200008 00000000 .D....... ......
00000090: 02440900 00000000 30a40000 00004400 .D......0.....D.
000000a0: 04420800 00000000 00000040 00020000 .B.........@....
000000b0: 05020000 00100000 00060000 00000000 ................
000000c0: 00400000 00000000 00080000 00040000 .@..............
000000d0: 10400000 00800004 00000000 00000200 .@..............
000000e0: 80890000 00010004 00080000 00000020 ...............
000000f0: 08000000 10000000 00010000 00000000 ................
=> md 40080000
40080000: 00000000 00000104 61100200 01000000 ........a.......
40080010: 00000000 00000000 81140000 82000100 ................
40080020: 01080000 00004000 22800000 00000600 ......@.".......
40080030: 00200800 00000000 10000100 00008000 . ..............
40080040: ffffffff ffffffff ffffffff ffffffff ................
40080050: ffffffff ffffffff ffffffff ffffffff ................
40080060: ffffffff ffffffff ffffffff ffffffff ................
40080070: ffffffff ffffffff ffffffff ffffffff ................
40080080: ffffffff ffffffff ffffffff ffffffff ................
40080090: ffffffff ffffffff ffffffff ffffffff ................
400800a0: ffffffff ffffffff ffffffff ffffffff ................
400800b0: ffffffff ffffffff ffffffff ffffffff ................
400800c0: ffffffff ffffffff ffffffff ffffffff ................
400800d0: ffffffff ffffffff ffffffff ffffffff ................
400800e0: ffffffff ffffffff ffffffff ffffffff ................
400800f0: ffffffff ffffffff ffffffff ffffffff ................
=>
------------------------------------------------------------------------------
The following sequence was performed to test storage of the environment
variables in Flash:
------------------------------------------------------------------------------
=> setenv foo bar
=> saveenv
Un-Protected 1 sectors
Erasing Flash...
.. done
Erased 1 sectors
Saving Environment to Flash...
Protected 1 sectors
=> reset
...
=> printenv
bootdelay=CONFIG_BOOTDELAY
baudrate=9600
ipaddr=192.168.4.7
serverip=192.168.4.1
ethaddr=66:55:44:33:22:11
foo=bar
stdin=serial
stdout=serial
stderr=serial
Environment size: 170/262140 bytes
=>
------------------------------------------------------------------------------
The following sequence was performed to test image download and run over
Ethernet interface (both interfaces were tested):
------------------------------------------------------------------------------
=> tftpboot 40000 hello_world.bin
ARP broadcast 1
TFTP from server 192.168.2.2; our IP address is 192.168.2.7
Filename 'hello_world.bin'.
Load address: 0x40000
Loading: #############
done
Bytes transferred = 65912 (10178 hex)
=> go 40004
## Starting application at 0x00040004 ...
Hello World
argc = 1
argv[0] = "40004"
argv[1] = "<NULL>"
Hit any key to exit ...
## Application terminated, rc = 0x0
=>
------------------------------------------------------------------------------
The following sequence was performed to test eeprom read/write commands:
------------------------------------------------------------------------------
=> md 40000
00040000: 00018148 9421ffe0 7c0802a6 bf61000c ...H.!..|....a..
00040010: 90010024 48000005 7fc802a6 801effe8 ...$H...........
00040020: 7fc0f214 7c7f1b78 813f004c 7c9c2378 ....|..x.?.L|.#x
00040030: 807e8000 7cbd2b78 80090010 3b600000 .~..|.+x....;`..
00040040: 7c0803a6 4e800021 813f004c 7f84e378 |...N..!.?.L...x
00040050: 807e8004 80090010 7c0803a6 4e800021 .~......|...N..!
00040060: 7c1be000 4181003c 80bd0000 813f004c |...A..<.....?.L
00040070: 3bbd0004 2c050000 40820008 80be8008 ;...,...@.......
00040080: 80090010 7f64db78 807e800c 3b7b0001 .....d.x.~..;{..
00040090: 7c0803a6 4e800021 7c1be000 4081ffcc |...N..!|...@...
000400a0: 813f004c 807e8010 80090010 7c0803a6 .?.L.~......|...
000400b0: 4e800021 813f004c 80090004 7c0803a6 N..!.?.L....|...
000400c0: 4e800021 2c030000 4182ffec 813f004c N..!,...A....?.L
000400d0: 80090000 7c0803a6 4e800021 813f004c ....|...N..!.?.L
000400e0: 807e8014 80090010 7c0803a6 4e800021 .~......|...N..!
000400f0: 38600000 80010024 7c0803a6 bb61000c 8`.....$|....a..
=> eeprom write 40000 0 40
EEPROM write: addr 00040000 off 0000 count 64 ... done
=> mw 50000 0 1000
=> eeprom read 50000 0 40
EEPROM read: addr 00050000 off 0000 count 64 ... done
=> md 50000
00050000: 00018148 9421ffe0 7c0802a6 bf61000c ...H.!..|....a..
00050010: 90010024 48000005 7fc802a6 801effe8 ...$H...........
00050020: 7fc0f214 7c7f1b78 813f004c 7c9c2378 ....|..x.?.L|.#x
00050030: 807e8000 7cbd2b78 80090010 3b600000 .~..|.+x....;`..
00050040: 00000000 00000000 00000000 00000000 ................
00050050: 00000000 00000000 00000000 00000000 ................
00050060: 00000000 00000000 00000000 00000000 ................
00050070: 00000000 00000000 00000000 00000000 ................
00050080: 00000000 00000000 00000000 00000000 ................
00050090: 00000000 00000000 00000000 00000000 ................
000500a0: 00000000 00000000 00000000 00000000 ................
000500b0: 00000000 00000000 00000000 00000000 ................
000500c0: 00000000 00000000 00000000 00000000 ................
000500d0: 00000000 00000000 00000000 00000000 ................
000500e0: 00000000 00000000 00000000 00000000 ................
000500f0: 00000000 00000000 00000000 00000000 ................
=>
------------------------------------------------------------------------------
Patch per Mon, 06 Aug 2001 17:57:27:
- upgraded Flash support (added support for the following chips:
AM29LV800T/B, AM29LV160T/B, AM29DL322T/B, AM29DL323T/B)
- BCR tweakage for the 8260 bus mode
- SIUMCR tweakage enabling the MI interrupt (IRQ7)
To simplify switching between the bus modes, a new configuration
option (CONFIG_BUSMODE_60x) has been added to the "config_TQM8260.h"
file. If it is defined, BCR will be configured for the 60x mode,
otherwise - for the 8260 mode.
Concerning the SIUMCR modification: it's hard to predict whether it
will induce any problems on the other (60x mode) board. However, the
problems (if they appear) should be easy to notice - if the board
does not boot, it's most likely caused by the DPPC configuration in
SIUMCR.