c62b74652a
Only two boards in the tree set the macro DWC_NET_PHYADDR. Both have
CONFIG_DM_ETH_PHY=y, so should set the phy address in DT if necessary.
The imx8mp_evk does set the correct address in device tree.
The other board seems to be a copy-paste-adapt from an old
version of the imx8mp_evk config header, given the "#ifdef
CONFIG_DWC_ETH_QOS" block that has been removed from imx8mp_evk header
in commit 127fb45495. Its device tree doesn't even enable (i.e., set
'status = "okay"') the &eqos node. But the other ethernet device,
&fec, does get enabled, and does have a phy sitting at address 4 (and
it also has a corresponding legacy #define CONFIG_FEC_MXC_PHYADDR
4). So I believe it should be completely safe to remove it from there
as well.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
[trini: Re-apply to top of tree, update imx93_evk.h]
Signed-off-by: Tom Rini <trini@konsulko.com>
179 lines
4.8 KiB
C
179 lines
4.8 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2019 NXP
|
|
* Copyright 2022 Linaro
|
|
*/
|
|
|
|
#ifndef __IMX8MP_RSB3720_H
|
|
#define __IMX8MP_RSB3720_H
|
|
|
|
#include <linux/sizes.h>
|
|
#include <linux/stringify.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
|
|
#define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
|
|
|
|
/* GUIDs for capsule updatable firmware images */
|
|
#define IMX8MP_RSB3720A1_4G_FIT_IMAGE_GUID \
|
|
EFI_GUID(0xb1251e89, 0x384a, 0x4635, 0xa8, 0x06, \
|
|
0x3a, 0xa0, 0xb0, 0xe9, 0xf9, 0x65)
|
|
|
|
#define IMX8MP_RSB3720A1_6G_FIT_IMAGE_GUID \
|
|
EFI_GUID(0xb5fb6f08, 0xe142, 0x4db1, 0x97, 0xea, \
|
|
0x5f, 0xd3, 0x6b, 0x9b, 0xe5, 0xb9)
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_MALLOC_F_ADDR 0x184000 /* malloc f used before \
|
|
* GD_FLG_FULL_MALLOC_INIT \
|
|
* set \
|
|
*/
|
|
|
|
|
|
#if defined(CONFIG_NAND_BOOT)
|
|
#define CONFIG_SPL_NAND_MXS
|
|
#endif
|
|
|
|
#endif
|
|
|
|
/* ENET Config */
|
|
/* ENET1 */
|
|
#if defined(CONFIG_CMD_NET)
|
|
#define CONFIG_FEC_MXC_PHYADDR 4
|
|
|
|
#ifdef CONFIG_DWC_ETH_QOS
|
|
#define CONFIG_SYS_NONCACHED_MEMORY (1 * SZ_1M) /* 1M */
|
|
#endif
|
|
|
|
#define PHY_ANEG_TIMEOUT 20000
|
|
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(CMD_MMC)
|
|
# define BOOT_TARGET_MMC(func) \
|
|
func(MMC, mmc, 2) \
|
|
func(MMC, mmc, 1)
|
|
#else
|
|
# define BOOT_TARGET_MMC(func)
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(CMD_PXE)
|
|
# define BOOT_TARGET_PXE(func) func(PXE, pxe, na)
|
|
#else
|
|
# define BOOT_TARGET_PXE(func)
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(CMD_DHCP)
|
|
# define BOOT_TARGET_DHCP(func) func(DHCP, dhcp, na)
|
|
#else
|
|
# define BOOT_TARGET_DHCP(func)
|
|
#endif
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
BOOT_TARGET_MMC(func) \
|
|
BOOT_TARGET_PXE(func) \
|
|
BOOT_TARGET_DHCP(func)
|
|
|
|
/* Initial environment variables */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
BOOTENV \
|
|
"script=boot.scr\0" \
|
|
"image=Image\0" \
|
|
"splashimage=0x50000000\0" \
|
|
"console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200\0" \
|
|
"fdt_addr=0x43000000\0" \
|
|
"fdt_addr_r=0x43000000\0" \
|
|
"boot_fit=no\0" \
|
|
"dfu_alt_info=mmc 2=flash-bin raw 0 0x1B00 mmcpart 1\0" \
|
|
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
|
|
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
|
|
"initrd_addr=0x43800000\0" \
|
|
"bootm_size=0x10000000\0" \
|
|
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
|
|
"mmcpart=1\0" \
|
|
"mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
|
|
"mmcautodetect=yes\0" \
|
|
"mmcargs=setenv bootargs ${jh_clk} console=${console} root=${mmcroot}\0 " \
|
|
"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
|
|
"bootscript=echo Running bootscript from mmc ...; " \
|
|
"source\0" \
|
|
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
|
|
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
|
|
"kernel_addr_r=0x40480000\0" \
|
|
"pxefile_addr_r=0x40480000\0" \
|
|
"ramdisk_addr_r=0x43800000\0" \
|
|
"mmcboot=echo Booting from mmc ...; " \
|
|
"run mmcargs; " \
|
|
"if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
|
|
"bootm ${loadaddr}; " \
|
|
"else " \
|
|
"if run loadfdt; then " \
|
|
"booti ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"fi;\0" \
|
|
"netargs=setenv bootargs ${jh_clk} console=${console} " \
|
|
"root=/dev/nfs " \
|
|
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
|
|
"netboot=echo Booting from net ...; " \
|
|
"run netargs; " \
|
|
"if test ${ip_dyn} = yes; then " \
|
|
"setenv get_cmd dhcp; " \
|
|
"else " \
|
|
"setenv get_cmd tftp; " \
|
|
"fi; " \
|
|
"${get_cmd} ${loadaddr} ${image}; " \
|
|
"if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
|
|
"bootm ${loadaddr}; " \
|
|
"else " \
|
|
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
|
|
"booti ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"fi;\0"
|
|
|
|
/* Link Definitions */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
|
|
|
|
|
|
/* Totally 6GB or 4G DDR */
|
|
#define CONFIG_SYS_SDRAM_BASE 0x40000000
|
|
#define PHYS_SDRAM 0x40000000
|
|
#if defined(CONFIG_TARGET_IMX8MP_RSB3720A1_6G)
|
|
#define PHYS_SDRAM_SIZE 0xC0000000 /* 3 GB */
|
|
#define PHYS_SDRAM_2 0x100000000
|
|
#define PHYS_SDRAM_2_SIZE 0xC0000000 /* 3 GB */
|
|
#elif defined(CONFIG_TARGET_IMX8MP_RSB3720A1_4G)
|
|
#define PHYS_SDRAM_SIZE 0x80000000 /* 2 GB */
|
|
#define PHYS_SDRAM_2 0xC0000000
|
|
#define PHYS_SDRAM_2_SIZE 0x80000000 /* 2 GB */
|
|
#endif
|
|
|
|
#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR
|
|
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
|
|
#ifdef CONFIG_FSL_FSPI
|
|
#define FSL_FSPI_FLASH_SIZE SZ_32M
|
|
#define FSL_FSPI_FLASH_NUM 1
|
|
#define FSPI0_BASE_ADDR 0x30bb0000
|
|
#define FSPI0_AMBA_BASE 0x0
|
|
#define CONFIG_FSPI_QUAD_SUPPORT
|
|
|
|
#define CONFIG_SYS_FSL_FSPI_AHB
|
|
#endif
|
|
|
|
#ifdef CONFIG_NAND_MXS
|
|
|
|
/* NAND stuff */
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x20000000
|
|
#endif /* CONFIG_NAND_MXS */
|
|
|
|
#endif /* __IMX8MP_RSB3720_H */
|