1c34f7885d
This converts the following to Kconfig: CONFIG_SH_GPIO_PFC CONFIG_TMU_TIMER Signed-off-by: Tom Rini <trini@konsulko.com>
638 lines
19 KiB
Plaintext
638 lines
19 KiB
Plaintext
#
|
|
# GPIO infrastructure and drivers
|
|
#
|
|
|
|
menuconfig GPIO
|
|
bool "GPIO support"
|
|
default y
|
|
help
|
|
Enable support for GPIOs (General-purpose Input/Output) in U-Boot.
|
|
GPIOs allow U-Boot to read the state of an input line (high or
|
|
low) and set the state of an output line. This can be used to
|
|
drive LEDs, control power to various system parts and read user
|
|
input. GPIOs can be useful to enable a 'sign-of-life' LED,
|
|
for example. Enable this option to build the drivers in
|
|
drivers/gpio as part of an U-Boot build.
|
|
|
|
if GPIO
|
|
|
|
config DM_GPIO
|
|
bool "Enable Driver Model for GPIO drivers"
|
|
depends on DM
|
|
help
|
|
Enable driver model for GPIO access. The standard GPIO
|
|
interface (gpio_get_value(), etc.) is then implemented by
|
|
the GPIO uclass. Drivers provide methods to query the
|
|
particular GPIOs that they provide. The uclass interface
|
|
is defined in include/asm-generic/gpio.h.
|
|
|
|
config SPL_DM_GPIO
|
|
bool "Enable Driver Model for GPIO drivers in SPL"
|
|
depends on DM_GPIO && SPL_DM && SPL_GPIO
|
|
default y
|
|
help
|
|
Enable driver model for GPIO access in SPL. The standard GPIO
|
|
interface (gpio_get_value(), etc.) is then implemented by
|
|
the GPIO uclass. Drivers provide methods to query the
|
|
particular GPIOs that they provide. The uclass interface
|
|
is defined in include/asm-generic/gpio.h.
|
|
|
|
config TPL_DM_GPIO
|
|
bool "Enable Driver Model for GPIO drivers in TPL"
|
|
depends on DM_GPIO && TPL_DM && TPL_GPIO
|
|
default y
|
|
help
|
|
Enable driver model for GPIO access in TPL. The standard GPIO
|
|
interface (gpio_get_value(), etc.) is then implemented by
|
|
the GPIO uclass. Drivers provide methods to query the
|
|
particular GPIOs that they provide. The uclass interface
|
|
is defined in include/asm-generic/gpio.h.
|
|
|
|
config VPL_DM_GPIO
|
|
bool "Enable Driver Model for GPIO drivers in VPL"
|
|
depends on DM_GPIO && VPL_DM && VPL_GPIO
|
|
default y
|
|
help
|
|
Enable driver model for GPIO access in VPL. The standard GPIO
|
|
interface (gpio_get_value(), etc.) is then implemented by
|
|
the GPIO uclass. Drivers provide methods to query the
|
|
particular GPIOs that they provide. The uclass interface
|
|
is defined in include/asm-generic/gpio.h.
|
|
|
|
config GPIO_HOG
|
|
bool "Enable GPIO hog support"
|
|
depends on DM_GPIO
|
|
help
|
|
Enable gpio hog support
|
|
The GPIO chip may contain GPIO hog definitions. GPIO hogging
|
|
is a mechanism providing automatic GPIO request and config-
|
|
uration as part of the gpio-controller's driver probe function.
|
|
|
|
config SPL_GPIO_HOG
|
|
bool "Enable GPIO hog support in SPL"
|
|
depends on SPL_GPIO
|
|
help
|
|
Enable gpio hog support in SPL
|
|
The GPIO chip may contain GPIO hog definitions. GPIO hogging
|
|
is a mechanism providing automatic GPIO request and config-
|
|
uration as part of the gpio-controller's driver probe function.
|
|
|
|
config DM_GPIO_LOOKUP_LABEL
|
|
bool "Enable searching for gpio labelnames"
|
|
depends on DM_GPIO
|
|
help
|
|
This option enables searching for gpio names in
|
|
the defined gpio labels, if the search for the
|
|
gpio bank name failed. This makes sense if you use
|
|
different gpios on different hardware versions
|
|
for the same functionality in board code.
|
|
|
|
config SPL_DM_GPIO_LOOKUP_LABEL
|
|
bool "Enable searching for gpio labelnames"
|
|
depends on SPL_DM_GPIO
|
|
help
|
|
This option enables searching for gpio names in
|
|
the defined gpio labels, if the search for the
|
|
gpio bank name failed. This makes sense if you use
|
|
different gpios on different hardware versions
|
|
for the same functionality in board code.
|
|
|
|
config ALTERA_PIO
|
|
bool "Altera PIO driver"
|
|
depends on DM_GPIO
|
|
help
|
|
Select this to enable PIO for Altera devices. Please find
|
|
details on the "Embedded Peripherals IP User Guide" of Altera.
|
|
|
|
config BCM2835_GPIO
|
|
bool "BCM2835 GPIO driver"
|
|
depends on DM_GPIO
|
|
|
|
config BCM6345_GPIO
|
|
bool "BCM6345 GPIO driver"
|
|
depends on DM_GPIO && (ARCH_BMIPS || BCM6856 || \
|
|
BCM6858 || BCM63158 || BCM6855)
|
|
help
|
|
This driver supports the GPIO banks on BCM6345 SoCs.
|
|
|
|
config CORTINA_GPIO
|
|
bool "Cortina-Access GPIO driver"
|
|
depends on DM_GPIO && CORTINA_PLATFORM
|
|
help
|
|
Enable support for the GPIO controller in Cortina CAxxxx SoCs.
|
|
This driver supports all CPU ISA variants supported by Cortina
|
|
Access CAxxxx SoCs.
|
|
|
|
config DWAPB_GPIO
|
|
bool "DWAPB GPIO driver"
|
|
depends on DM && DM_GPIO
|
|
help
|
|
Support for the Designware APB GPIO driver.
|
|
|
|
config AT91_GPIO
|
|
bool "AT91 PIO GPIO driver"
|
|
help
|
|
Say yes here to select AT91 PIO GPIO driver. AT91 PIO
|
|
controller manages up to 32 fully programmable input/output
|
|
lines. Each I/O line may be dedicated as a general-purpose
|
|
I/O or be assigned to a function of an embedded peripheral.
|
|
The assignment to a function of an embedded peripheral is
|
|
the responsibility of AT91 Pinctrl driver. This driver is
|
|
responsible for the general-purpose I/O.
|
|
|
|
config ATMEL_PIO4
|
|
bool "ATMEL PIO4 driver"
|
|
depends on DM_GPIO
|
|
help
|
|
Say yes here to support the Atmel PIO4 driver.
|
|
The PIO4 is new version of Atmel PIO controller, which manages
|
|
up to 128 fully programmable input/output lines. Each I/O line
|
|
may be dedicated as a general purpose I/O or be assigned to
|
|
a function of an embedded peripheral.
|
|
|
|
config ASPEED_GPIO
|
|
bool "Aspeed GPIO Driver"
|
|
help
|
|
Say yes here to support the Aspeed GPIO driver. The controller
|
|
is found in the AST2400, AST2500 and AST2600 BMC SoCs and
|
|
provides access to over 200 GPIOs on each chip.
|
|
|
|
config DA8XX_GPIO
|
|
bool "DA8xx GPIO Driver"
|
|
help
|
|
This driver supports the DA8xx GPIO controller
|
|
|
|
config FXL6408_GPIO
|
|
bool "FXL6408 I2C GPIO expander driver"
|
|
depends on DM_GPIO && DM_I2C
|
|
help
|
|
This driver supports the Fairchild FXL6408 device. FXL6408 is a
|
|
fully configurable 8-bit I2C-controlled GPIO expander.
|
|
|
|
config HIKEY_GPIO
|
|
bool "HI6220 GPIO driver"
|
|
depends on DM_GPIO
|
|
|
|
config INTEL_BROADWELL_GPIO
|
|
bool "Intel Broadwell GPIO driver"
|
|
depends on DM
|
|
help
|
|
This driver supports Broadwell U devices which have an expanded
|
|
GPIO feature set. The difference is large enough to merit a separate
|
|
driver from the common Intel ICH6 driver. It supports a total of
|
|
95 GPIOs which can be configured from the device tree.
|
|
|
|
config INTEL_GPIO
|
|
bool "Intel generic GPIO driver"
|
|
depends on DM_GPIO
|
|
help
|
|
Say yes here to select Intel generic GPIO driver. This controller
|
|
supports recent chips (e.g. Apollo Lake). It permits basic GPIO
|
|
control including setting pins to input/output. It makes use of its
|
|
parent pinctrl driver to actually effect changes.
|
|
|
|
config INTEL_ICH6_GPIO
|
|
bool "Intel ICH6 compatible legacy GPIO driver"
|
|
depends on DM_GPIO
|
|
help
|
|
Say yes here to select Intel ICH6 compatible legacy GPIO driver.
|
|
|
|
config IMX_RGPIO2P
|
|
bool "i.MX7ULP RGPIO2P driver"
|
|
depends on DM
|
|
help
|
|
This driver supports i.MX7ULP Rapid GPIO2P controller.
|
|
|
|
config IPROC_GPIO
|
|
bool "Broadcom iProc GPIO driver(without pinconf)"
|
|
help
|
|
The Broadcom iProc based SoCs- Cygnus, NS2, NS3, NSP and Stingray,
|
|
use the same GPIO Controller IP hence this driver could be used
|
|
for all.
|
|
|
|
The Broadcom iProc based SoCs have multiple GPIO controllers and only
|
|
the always-ON GPIO controller (CRMU/AON) is supported by this driver.
|
|
|
|
config HSDK_CREG_GPIO
|
|
bool "HSDK CREG GPIO griver"
|
|
depends on DM_GPIO
|
|
help
|
|
This driver supports CREG GPIOs on Synopsys HSDK SOC.
|
|
|
|
config KIRKWOOD_GPIO
|
|
bool "Kirkwood GPIO driver"
|
|
help
|
|
This drdiver supports GPIOs on Kirkwood platforms
|
|
|
|
config LPC32XX_GPIO
|
|
bool "LPC32XX GPIO driver"
|
|
depends on DM
|
|
help
|
|
Support for the LPC32XX GPIO driver.
|
|
|
|
config MAX7320_GPIO
|
|
bool "MAX7320 I2C GPIO Expander driver"
|
|
depends on DM_GPIO && DM_I2C
|
|
help
|
|
Support for MAX7320 I2C 8/16-bit GPIO expander.
|
|
original maxim device has 8 push/pull outputs,
|
|
some clones offers 16bit.
|
|
|
|
config MCP230XX_GPIO
|
|
bool "MCP230XX GPIO driver"
|
|
depends on DM
|
|
help
|
|
Support for Microchip's MCP230XX I2C connected GPIO devices.
|
|
The following chips are supported:
|
|
- MCP23008
|
|
- MCP23017
|
|
- MCP23018
|
|
|
|
config MSCC_SGPIO
|
|
bool "Microsemi Serial GPIO driver"
|
|
depends on DM_GPIO && SOC_VCOREIII
|
|
help
|
|
Support for the VCoreIII SoC serial GPIO device. By using a
|
|
serial interface, the SIO controller significantly extends
|
|
the number of available GPIOs with a minimum number of
|
|
additional pins on the device. The primary purpose of the
|
|
SIO controller is to connect control signals from SFP
|
|
modules and to act as an LED controller.
|
|
|
|
config MSM_GPIO
|
|
bool "Qualcomm GPIO driver"
|
|
depends on DM_GPIO
|
|
help
|
|
Support GPIO controllers on Qualcomm Snapdragon family of SoCs.
|
|
This controller have single bank (default name "soc"), every
|
|
gpio has it's own set of registers.
|
|
Only simple GPIO operations are supported (get/set, change of
|
|
direction and checking pin function).
|
|
Supported devices:
|
|
- APQ8016
|
|
- MSM8916
|
|
|
|
config MXC_GPIO
|
|
bool "Freescale/NXP MXC GPIO driver"
|
|
help
|
|
Support GPIO controllers on various i.MX platforms
|
|
|
|
config MXS_GPIO
|
|
bool "Freescale/NXP MXS GPIO driver"
|
|
help
|
|
Support GPIO controllers on i.MX23 and i.MX28 platforms
|
|
|
|
config NPCM_GPIO
|
|
bool "Nuvoton NPCM GPIO driver"
|
|
depends on DM_GPIO
|
|
help
|
|
Support GPIO controllers on Nuvovon NPCM SoCs.
|
|
NPCM7xx/NPCM8xx contain 8 GPIO banks, each bank contains 32 pins.
|
|
|
|
config OMAP_GPIO
|
|
bool "TI OMAP GPIO driver"
|
|
depends on ARCH_OMAP2PLUS
|
|
default y
|
|
help
|
|
Support GPIO controllers on the TI OMAP3/4/5 and related (such as
|
|
AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs.
|
|
|
|
config CMD_PCA953X
|
|
bool "Enable the pca953x command"
|
|
help
|
|
Deprecated: This should be converted to driver model.
|
|
|
|
This command provides access to a pca953x GPIO device using the
|
|
legacy GPIO interface. Several subcommands are provided which mirror
|
|
the standard 'gpio' command. It should use that instead.
|
|
|
|
config QCOM_PMIC_GPIO
|
|
bool "Qualcomm generic PMIC GPIO/keypad driver"
|
|
depends on DM_GPIO && PMIC_QCOM
|
|
help
|
|
Support for GPIO pins and power/reset buttons found on
|
|
Qualcomm SoCs PMIC.
|
|
Default name for GPIO bank is "pm8916".
|
|
Power and reset buttons are placed in "pwkey_qcom" bank and
|
|
have gpio numbers 0 and 1 respectively.
|
|
|
|
config PCF8575_GPIO
|
|
bool "PCF8575 I2C GPIO Expander driver"
|
|
depends on DM_GPIO && DM_I2C
|
|
help
|
|
Support for PCF8575 I2C 16-bit GPIO expander. Most of these
|
|
chips are from NXP and TI.
|
|
|
|
config RCAR_GPIO
|
|
bool "Renesas RCar GPIO driver"
|
|
depends on DM_GPIO && ARCH_RMOBILE
|
|
help
|
|
This driver supports the GPIO banks on Renesas RCar SoCs.
|
|
|
|
config RZA1_GPIO
|
|
bool "Renesas RZ/A1 GPIO driver"
|
|
depends on DM_GPIO && RZA1
|
|
help
|
|
This driver supports the GPIO banks on Renesas RZ/A1 R7S72100 SoCs.
|
|
|
|
config ROCKCHIP_GPIO
|
|
bool "Rockchip GPIO driver"
|
|
depends on DM_GPIO
|
|
help
|
|
Support GPIO access on Rockchip SoCs. The GPIOs are arranged into
|
|
a number of banks (different for each SoC type) each with 32 GPIOs.
|
|
The GPIOs for a device are defined in the device tree with one node
|
|
for each bank.
|
|
|
|
config SANDBOX_GPIO
|
|
bool "Enable sandbox GPIO driver"
|
|
depends on SANDBOX && DM && DM_GPIO
|
|
help
|
|
This driver supports some simulated GPIOs which can be adjusted
|
|
using 'back door' functions like sandbox_gpio_set_value(). Then the
|
|
GPIOs can be inspected through the normal get_get_value()
|
|
interface. The purpose of this is to allow GPIOs to be used as
|
|
normal in sandbox, perhaps with test code actually driving the
|
|
behaviour of those GPIOs.
|
|
|
|
config SANDBOX_GPIO_COUNT
|
|
int "Number of sandbox GPIOs"
|
|
depends on SANDBOX_GPIO
|
|
default 128
|
|
help
|
|
The sandbox driver can support any number of GPIOs. Generally these
|
|
are specified using the device tree. But you can also have a number
|
|
of 'anonymous' GPIOs that do not belong to any device or bank.
|
|
Select a suitable value depending on your needs.
|
|
|
|
config SUNXI_GPIO
|
|
bool "Allwinner GPIO driver"
|
|
depends on ARCH_SUNXI
|
|
select SPL_STRTO if SPL
|
|
help
|
|
Support the GPIO device in Allwinner SoCs.
|
|
|
|
config XILINX_GPIO
|
|
bool "Xilinx GPIO driver"
|
|
depends on DM_GPIO
|
|
help
|
|
This config enable the Xilinx GPIO driver for Microblaze.
|
|
|
|
config TCA642X
|
|
bool "TCA642x legacy GPIO driver"
|
|
|
|
config CMD_TCA642X
|
|
bool "tca642x - Command to access tca642x state"
|
|
depends on TCA642X
|
|
default y
|
|
help
|
|
DEPRECATED - This needs conversion to driver model
|
|
|
|
This provides a way to looking at the pin state of this device.
|
|
This mirrors the 'gpio' command and that should be used in preference
|
|
to custom code.
|
|
|
|
config TEGRA_GPIO
|
|
bool "Tegra20..210 GPIO driver"
|
|
depends on DM_GPIO
|
|
help
|
|
Support for the GPIO controller contained in NVIDIA Tegra20 through
|
|
Tegra210.
|
|
|
|
config TEGRA186_GPIO
|
|
bool "Tegra186 GPIO driver"
|
|
depends on DM_GPIO
|
|
help
|
|
Support for the GPIO controller contained in NVIDIA Tegra186. This
|
|
covers both the "main" and "AON" controller instances, even though
|
|
they have slightly different register layout.
|
|
|
|
config GPIO_UNIPHIER
|
|
bool "UniPhier GPIO"
|
|
depends on ARCH_UNIPHIER
|
|
help
|
|
Say yes here to support UniPhier GPIOs.
|
|
|
|
config VYBRID_GPIO
|
|
bool "Vybrid GPIO driver"
|
|
depends on DM
|
|
help
|
|
Say yes here to support Vybrid vf610 GPIOs.
|
|
|
|
config PIC32_GPIO
|
|
bool "Microchip PIC32 GPIO driver"
|
|
depends on DM_GPIO && MACH_PIC32
|
|
default y
|
|
help
|
|
Say yes here to support Microchip PIC32 GPIOs.
|
|
|
|
config OCTEON_GPIO
|
|
bool "Octeon II/III/TX/TX2 GPIO driver"
|
|
depends on DM_GPIO && PCI && (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
|
|
default y
|
|
help
|
|
Add support for the Marvell Octeon GPIO driver. This is used with
|
|
various Octeon parts such as Octeon II/III and OcteonTX/TX2.
|
|
Octeon II/III has 32 GPIOs (count defined via DT) and OcteonTX/TX2
|
|
has 64 GPIOs (count defined via internal register).
|
|
|
|
config STM32_GPIO
|
|
bool "ST STM32 GPIO driver"
|
|
depends on DM_GPIO && (ARCH_STM32 || ARCH_STM32MP)
|
|
default y
|
|
help
|
|
Device model driver support for STM32 GPIO controller. It should be
|
|
usable on many stm32 families like stm32f4/f7/h7 and stm32mp1.
|
|
Tested on STM32F7.
|
|
|
|
config SIFIVE_GPIO
|
|
bool "SiFive GPIO driver"
|
|
depends on DM_GPIO
|
|
help
|
|
Device model driver for GPIO controller present in SiFive FU540 SoC. This
|
|
driver enables GPIO interface on HiFive Unleashed A00 board.
|
|
|
|
config MVEBU_GPIO
|
|
bool "Marvell MVEBU GPIO driver"
|
|
depends on DM_GPIO && (ARCH_MVEBU || ARCH_KIRKWOOD)
|
|
default y
|
|
help
|
|
Say yes here to support Marvell MVEBU (Armada XP/38x) GPIOs.
|
|
|
|
config ZYNQ_GPIO
|
|
bool "Zynq GPIO driver"
|
|
depends on DM_GPIO
|
|
default y if ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
|
|
help
|
|
Supports GPIO access on Zynq SoC.
|
|
|
|
config DM_74X164
|
|
bool "74x164 serial-in/parallel-out 8-bits shift register"
|
|
depends on DM_GPIO
|
|
help
|
|
Driver for 74x164 compatible serial-in/parallel-out 8-outputs
|
|
shift registers, such as 74lv165, 74hc595.
|
|
This driver can be used to provide access to more gpio outputs.
|
|
|
|
config DM_PCA953X
|
|
bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
|
|
depends on DM_GPIO && DM_I2C
|
|
help
|
|
Say yes here to provide access to several register-oriented
|
|
SMBus I/O expanders, made mostly by NXP or TI. Compatible
|
|
models include:
|
|
|
|
4 bits: pca9536, pca9537
|
|
|
|
8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
|
|
pca9556, pca9557, pca9574, tca6408, xra1202
|
|
|
|
16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
|
|
tca6416
|
|
|
|
24 bits: tca6424
|
|
|
|
40 bits: pca9505, pca9698
|
|
|
|
Now, max 24 bits chips and PCA953X compatible chips are
|
|
supported
|
|
|
|
config SPL_DM_PCA953X
|
|
bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports in SPL"
|
|
depends on SPL_DM_GPIO
|
|
help
|
|
Say yes here to provide access to several register-oriented
|
|
SMBus I/O expanders, made mostly by NXP or TI. Compatible
|
|
models include:
|
|
|
|
4 bits: pca9536, pca9537
|
|
|
|
8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
|
|
pca9556, pca9557, pca9574, tca6408, xra1202
|
|
|
|
16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
|
|
tca6416
|
|
|
|
24 bits: tca6424
|
|
|
|
40 bits: pca9505, pca9698
|
|
|
|
Now, max 24 bits chips and PCA953X compatible chips are
|
|
supported
|
|
|
|
config PCA953X
|
|
bool "NXP's PCA953X series I2C GPIO (legacy driver)"
|
|
depends on !DM_PCA953X
|
|
|
|
config MPC8XXX_GPIO
|
|
bool "Freescale MPC8XXX GPIO driver"
|
|
depends on DM_GPIO
|
|
help
|
|
This driver supports the built-in GPIO controller of MPC8XXX CPUs.
|
|
Each GPIO bank is identified by its own entry in the device tree,
|
|
i.e.
|
|
|
|
gpio-controller@fc00 {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,pq3-gpio";
|
|
reg = <0xfc00 0x100>
|
|
}
|
|
|
|
By default, each bank is assumed to have 32 GPIOs, but the ngpios
|
|
setting is honored, so the number of GPIOs for each bank is
|
|
configurable to match the actual GPIO count of the SoC (e.g. the
|
|
32/32/23 banks of the P1022 SoC).
|
|
|
|
Aside from the standard functions of input/output mode, and output
|
|
value setting, the open-drain feature, which can configure individual
|
|
GPIOs to work as open-drain outputs, is supported.
|
|
|
|
config MPC83XX_SPISEL_BOOT
|
|
bool "Freescale MPC83XX SPISEL_BOOT driver"
|
|
depends on DM_GPIO && ARCH_MPC830X
|
|
help
|
|
GPIO driver to set/clear dedicated SPISEL_BOOT output on MPC83XX.
|
|
|
|
This pin is typically used as spi chip select to a spi nor flash.
|
|
|
|
config MT7620_GPIO
|
|
bool "MediaTek MT7620 GPIO driver"
|
|
depends on DM_GPIO && SOC_MT7620
|
|
default y
|
|
help
|
|
Device model driver for GPIO controller present in MediaTek MT7620
|
|
and earlier SoCs.
|
|
|
|
config MT7621_GPIO
|
|
bool "MediaTek MT7621 GPIO driver"
|
|
depends on DM_GPIO && (SOC_MT7621 || SOC_MT7628)
|
|
default y
|
|
help
|
|
Say yes here to support MediaTek MT7621 compatible GPIOs.
|
|
|
|
config NX_GPIO
|
|
bool "Nexell GPIO driver"
|
|
depends on DM_GPIO
|
|
help
|
|
Support GPIO access on Nexell SoCs. The GPIOs are arranged into
|
|
a number of banks (different for each SoC type) each with 32 GPIOs.
|
|
The GPIOs for a device are defined in the device tree with one node
|
|
for each bank.
|
|
|
|
config NOMADIK_GPIO
|
|
bool "Nomadik GPIO driver"
|
|
depends on DM_GPIO
|
|
help
|
|
Support GPIO access on ST-Ericsson Ux500 SoCs. The GPIOs are arranged
|
|
into a number of banks each with 32 GPIOs. The GPIOs for a device are
|
|
defined in the device tree with one node for each bank.
|
|
|
|
config ZYNQMP_GPIO_MODEPIN
|
|
bool "ZynqMP gpio modepin"
|
|
depends on DM_GPIO
|
|
help
|
|
This config enables the ZynqMP gpio modepin driver. ZynqMP modepin
|
|
driver will set and get the status of PS_MODE pins. These modepins
|
|
are accessed using xilinx firmware. In modepin register, [3:0] bits
|
|
set direction, [7:4] bits read IO, [11:8] bits set/clear IO.
|
|
|
|
config SH_GPIO_PFC
|
|
bool "Pinmuxed GPIO support for SuperH"
|
|
depends on RCAR_GEN2 && !PINCTRL_PFC
|
|
default y
|
|
|
|
config SL28CPLD_GPIO
|
|
bool "Kontron sl28cpld GPIO driver"
|
|
depends on DM_GPIO && SL28CPLD
|
|
help
|
|
Support GPIO access on Kontron sl28cpld board management controllers.
|
|
|
|
config SLG7XL45106_I2C_GPO
|
|
bool "slg7xl45106 i2c gpo expander"
|
|
depends on DM_GPIO
|
|
help
|
|
Support for slg7xl45106 i2c gpo expander. It is an i2c based
|
|
8-bit gpo expander, all gpo lines are controlled by writing
|
|
value into data register.
|
|
|
|
config TURRIS_OMNIA_MCU
|
|
bool "Turris Omnia MCU GPIO driver"
|
|
depends on DM_GPIO
|
|
default y if TARGET_TURRIS_OMNIA
|
|
help
|
|
Support for GPIOs on MCU connected to Turris Omnia via i2c.
|
|
|
|
config FTGPIO010
|
|
bool "Faraday Technology FTGPIO010 driver"
|
|
depends on DM_GPIO
|
|
help
|
|
Support for GPIOs on Faraday Technology's FTGPIO010 controller.
|
|
|
|
config ADP5585_GPIO
|
|
bool "ADP5585 GPIO driver"
|
|
depends on DM_GPIO && DM_I2C
|
|
help
|
|
Support ADP5585 GPIO expander.
|
|
|
|
endif
|