83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
141 lines
4.1 KiB
C
141 lines
4.1 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Andreas Heppel <aheppel@sysgo.de>
|
|
*/
|
|
|
|
#ifndef _MPC106_PCI_H
|
|
#define _MPC106_PCI_H
|
|
|
|
/*
|
|
* Defines for the MPC106 PCI Config address and data registers followed by
|
|
* defines for the standard PCI device configuration header.
|
|
*/
|
|
#define PCIDEVID_MPC106 0x0
|
|
|
|
/*
|
|
* MPC106 Registers
|
|
*/
|
|
#define MPC106_REG 0x80000000
|
|
|
|
#ifdef CONFIG_SYS_ADDRESS_MAP_A
|
|
#define MPC106_REG_ADDR 0x80000cf8
|
|
#define MPC106_REG_DATA 0x80000cfc
|
|
#define MPC106_ISA_IO_PHYS 0x80000000
|
|
#define MPC106_ISA_IO_BUS 0x00000000
|
|
#define MPC106_ISA_IO_SIZE 0x00800000
|
|
#define MPC106_PCI_IO_PHYS 0x81000000
|
|
#define MPC106_PCI_IO_BUS 0x01000000
|
|
#define MPC106_PCI_IO_SIZE 0x3e800000
|
|
#define MPC106_PCI_MEM_PHYS 0xc0000000
|
|
#define MPC106_PCI_MEM_BUS 0x00000000
|
|
#define MPC106_PCI_MEM_SIZE 0x3f000000
|
|
#define MPC106_PCI_MEMORY_PHYS 0x00000000
|
|
#define MPC106_PCI_MEMORY_BUS 0x80000000
|
|
#define MPC106_PCI_MEMORY_SIZE 0x80000000
|
|
#else
|
|
#define MPC106_REG_ADDR 0xfec00cf8
|
|
#define MPC106_REG_DATA 0xfee00cfc
|
|
#define MPC106_ISA_MEM_PHYS 0xfd000000
|
|
#define MPC106_ISA_MEM_BUS 0x00000000
|
|
#define MPC106_ISA_MEM_SIZE 0x01000000
|
|
#define MPC106_ISA_IO_PHYS 0xfe000000
|
|
#define MPC106_ISA_IO_BUS 0x00000000
|
|
#define MPC106_ISA_IO_SIZE 0x00800000
|
|
#define MPC106_PCI_IO_PHYS 0xfe800000
|
|
#define MPC106_PCI_IO_BUS 0x00800000
|
|
#define MPC106_PCI_IO_SIZE 0x00400000
|
|
#define MPC106_PCI_MEM_PHYS 0x80000000
|
|
#define MPC106_PCI_MEM_BUS 0x80000000
|
|
#define MPC106_PCI_MEM_SIZE 0x7d000000
|
|
#define MPC106_PCI_MEMORY_PHYS 0x00000000
|
|
#define MPC106_PCI_MEMORY_BUS 0x00000000
|
|
#define MPC106_PCI_MEMORY_SIZE 0x40000000
|
|
#endif
|
|
|
|
#define CMD_SERR 0x0100
|
|
#define PCI_CMD_MASTER 0x0004
|
|
#define PCI_CMD_MEMEN 0x0002
|
|
#define PCI_CMD_IOEN 0x0001
|
|
|
|
#define PCI_STAT_NO_RSV_BITS 0xffff
|
|
|
|
#define PCI_BUSNUM 0x40
|
|
#define PCI_SUBBUSNUM 0x41
|
|
#define PCI_DISCOUNT 0x42
|
|
|
|
#define PCI_PICR1 0xA8
|
|
#define PICR1_CF_CBA(value) ((value & 0xff) << 24)
|
|
#define PICR1_CF_BREAD_WS(value) ((value & 0x3) << 22)
|
|
#define PICR1_PROC_TYPE_603 0x40000
|
|
#define PICR1_PROC_TYPE_604 0x60000
|
|
#define PICR1_MCP_EN 0x800
|
|
#define PICR1_CF_DPARK 0x200
|
|
#define PICR1_CF_LOOP_SNOOP 0x10
|
|
#define PICR1_CF_L2_COPY_BACK 0x2
|
|
#define PICR1_CF_L2_CACHE_MASK 0x3
|
|
#define PICR1_CF_APARK 0x8
|
|
#define PICR1_ADDRESS_MAP 0x10000
|
|
#define PICR1_XIO_MODE 0x80000
|
|
#define PICR1_CF_CACHE_1G 0x200000
|
|
|
|
#define PCI_PICR2 0xAC
|
|
#define PICR2_CF_SNOOP_WS(value) ((value & 0x3) << 18)
|
|
#define PICR2_CF_FLUSH_L2 0x10000000
|
|
#define PICR2_CF_L2_HIT_DELAY(value) ((value & 0x3) << 9)
|
|
#define PICR2_CF_APHASE_WS(value) ((value & 0x3) << 2)
|
|
#define PICR2_CF_INV_MODE 0x00001000
|
|
#define PICR2_CF_MOD_HIGH 0x00020000
|
|
#define PICR2_CF_HIT_HIGH 0x00010000
|
|
#define PICR2_L2_SIZE_256K 0x00000000
|
|
#define PICR2_L2_SIZE_512K 0x00000010
|
|
#define PICR2_L2_SIZE_1MB 0x00000020
|
|
#define PICR2_L2_EN 0x40000000
|
|
#define PICR2_L2_UPDATE_EN 0x80000000
|
|
#define PICR2_CF_ADDR_ONLY_DISABLE 0x00004000
|
|
#define PICR2_CF_FAST_CASTOUT 0x00000080
|
|
#define PICR2_CF_WDATA 0x00000001
|
|
#define PICR2_CF_DATA_RAM_PBURST 0x00400000
|
|
|
|
/*
|
|
* Memory controller
|
|
*/
|
|
#define MPC106_MCCR1 0xF0
|
|
#define MCCR1_TYPE_EDO 0x00020000
|
|
#define MCCR1_BK0_9BITS 0x0
|
|
#define MCCR1_BK0_10BITS 0x1
|
|
#define MCCR1_BK0_11BITS 0x2
|
|
#define MCCR1_BK0_12BITS 0x3
|
|
#define MCCR1_BK1_9BITS 0x0
|
|
#define MCCR1_BK1_10BITS 0x4
|
|
#define MCCR1_BK1_11BITS 0x8
|
|
#define MCCR1_BK1_12BITS 0xC
|
|
#define MCCR1_BK2_9BITS 0x00
|
|
#define MCCR1_BK2_10BITS 0x10
|
|
#define MCCR1_BK2_11BITS 0x20
|
|
#define MCCR1_BK2_12BITS 0x30
|
|
#define MCCR1_BK3_9BITS 0x00
|
|
#define MCCR1_BK3_10BITS 0x40
|
|
#define MCCR1_BK3_11BITS 0x80
|
|
#define MCCR1_BK3_12BITS 0xC0
|
|
#define MCCR1_MEMGO 0x00080000
|
|
|
|
#define MPC106_MCCR2 0xF4
|
|
#define MPC106_MCCR3 0xF8
|
|
#define MPC106_MCCR4 0xFC
|
|
|
|
#define MPC106_MSAR1 0x80
|
|
#define MPC106_EMSAR1 0x88
|
|
#define MPC106_EMSAR2 0x8C
|
|
#define MPC106_MEAR1 0x90
|
|
#define MPC106_EMEAR1 0x98
|
|
#define MPC106_EMEAR2 0x9C
|
|
|
|
#define MPC106_MBER 0xA0
|
|
#define MBER_BANK0 0x1
|
|
#define MBER_BANK1 0x2
|
|
#define MBER_BANK2 0x4
|
|
#define MBER_BANK3 0x8
|
|
|
|
#endif
|