u-boot/drivers/pci/pcie_fsl.h
Hou Zhiqiang 0205beb156 dm: pci: fsl: Correct the workaround of erratum A-007815
The register to enable/disable the write-permission of DBI RO
registers should be accessed via the CFG_ADDR/CFG_DATA registers
instead of accessing directly.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23 16:52:09 +05:30

69 lines
1.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2019 NXP
*
* PCIe DM U-Boot driver for Freescale PowerPC SoCs
* Author: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
*/
#ifndef _PCIE_FSL_H_
#define _PCIE_FSL_H_
/* GPEX CSR */
#define CSR_CLASSCODE 0x474
#ifdef CONFIG_SYS_FSL_PCI_VER_3_X
#define FSL_PCIE_CAP_ID 0x70
#else
#define FSL_PCIE_CAP_ID 0x4c
#endif
/* PCIe Device Control Register */
#define PCI_DCR (FSL_PCIE_CAP_ID + 0x08)
/* PCIe Device Status Register */
#define PCI_DSR (FSL_PCIE_CAP_ID + 0x0a)
/* PCIe Link Control Register */
#define PCI_LCR (FSL_PCIE_CAP_ID + 0x10)
/* PCIe Link Status Register */
#define PCI_LSR (FSL_PCIE_CAP_ID + 0x12)
#define DBI_RO_WR_EN 0x8bc
#ifndef CONFIG_SYS_PCI_MEMORY_BUS
#define CONFIG_SYS_PCI_MEMORY_BUS 0
#endif
#ifndef CONFIG_SYS_PCI_MEMORY_PHYS
#define CONFIG_SYS_PCI_MEMORY_PHYS 0
#endif
#if defined(CONFIG_SYS_PCI_64BIT) && !defined(CONFIG_SYS_PCI64_MEMORY_BUS)
#define CONFIG_SYS_PCI64_MEMORY_BUS (64ull * 1024 * 1024 * 1024)
#endif
#define PEX_CSR0_LTSSM_MASK 0xFC
#define PEX_CSR0_LTSSM_SHIFT 2
#define LTSSM_L0_REV3 0x11
#define LTSSM_L0 0x16
struct fsl_pcie_data {
u32 block_offset; /* Offset from CCSR of 1st controller */
u32 block_offset_mask; /* Mask out the CCSR base */
u32 stride; /* Offset stride between controllers */
};
struct fsl_pcie {
int idx;
struct udevice *bus;
void __iomem *regs;
u32 law_trgt_if; /* LAW target ID */
u32 block_rev; /* IP block revision */
bool mode; /* RC&EP mode flag */
bool enabled; /* Enable status */
struct list_head list;
struct fsl_pcie_data *info;
};
extern struct list_head fsl_pcie_list;
#endif /* _PCIE_FSL_H_ */