cafb14fecb
The current dm9000x driver accesses its memory mapped registers directly instead of using the standard I/O accessors. This can cause problems on Blackfin systems as the accesses can get out of order. So convert the direct volatile dereferences to use the normal in/out macros. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Tested-by: Hoan Hoang <hnhoan@i-syst.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
397 lines
12 KiB
C
397 lines
12 KiB
C
/* ax88180.h: ASIX AX88180 Non-PCI Gigabit Ethernet u-boot driver */
|
|
/*
|
|
*
|
|
* This program is free software; you can distribute it and/or modify it
|
|
* under the terms of the GNU General Public License (Version 2) as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
*
|
|
*/
|
|
|
|
#ifndef _AX88180_H_
|
|
#define _AX88180_H_
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/types.h>
|
|
#include <config.h>
|
|
|
|
typedef enum _ax88180_link_state {
|
|
INS_LINK_DOWN,
|
|
INS_LINK_UP,
|
|
INS_LINK_UNKNOWN
|
|
} ax88180_link_state;
|
|
|
|
struct ax88180_private {
|
|
unsigned char BusWidth;
|
|
unsigned char PadSize;
|
|
unsigned short PhyAddr;
|
|
unsigned short PhyID0;
|
|
unsigned short PhyID1;
|
|
unsigned short FirstTxDesc;
|
|
unsigned short NextTxDesc;
|
|
ax88180_link_state LinkState;
|
|
};
|
|
|
|
#define BUS_WIDTH_16 1
|
|
#define BUS_WIDTH_32 2
|
|
|
|
#define ENABLE_JUMBO 1
|
|
#define DISABLE_JUMBO 0
|
|
|
|
#define ENABLE_BURST 1
|
|
#define DISABLE_BURST 0
|
|
|
|
#define NORMAL_RX_MODE 0
|
|
#define RX_LOOPBACK_MODE 1
|
|
#define RX_INIFINIT_LOOP_MODE 2
|
|
#define TX_INIFINIT_LOOP_MODE 3
|
|
|
|
#define DEFAULT_ETH_MTU 1500
|
|
|
|
/* Jumbo packet size 4086 bytes included 4 bytes CRC*/
|
|
#define MAX_JUMBO_MTU 4072
|
|
|
|
/* Max Tx Jumbo size 4086 bytes included 4 bytes CRC */
|
|
#define MAX_TX_JUMBO_SIZE 4086
|
|
|
|
/* Max Rx Jumbo size is 15K Bytes */
|
|
#define MAX_RX_SIZE 0x3C00
|
|
|
|
#define MARVELL_ALASKA_PHYSID0 0x141
|
|
#define MARVELL_88E1118_PHYSID1 0xE40
|
|
|
|
#define CICADA_CIS8201_PHYSID0 0x000F
|
|
|
|
#define MEDIA_AUTO 0
|
|
#define MEDIA_1000FULL 1
|
|
#define MEDIA_1000HALF 2
|
|
#define MEDIA_100FULL 3
|
|
#define MEDIA_100HALF 4
|
|
#define MEDIA_10FULL 5
|
|
#define MEDIA_10HALF 6
|
|
#define MEDIA_UNKNOWN 7
|
|
|
|
#define AUTO_MEDIA 0
|
|
#define FORCE_MEDIA 1
|
|
|
|
#define TXDP_MASK 3
|
|
#define TXDP0 0
|
|
#define TXDP1 1
|
|
#define TXDP2 2
|
|
#define TXDP3 3
|
|
|
|
#define CMD_MAP_SIZE 0x100
|
|
|
|
#if defined (CONFIG_DRIVER_AX88180_16BIT)
|
|
#define AX88180_MEMORY_SIZE 0x00004000
|
|
#define START_BASE 0x1000
|
|
|
|
#define RX_BUF_SIZE 0x1000
|
|
#define TX_BUF_SIZE 0x0F00
|
|
|
|
#define TX_BASE START_BASE
|
|
#define CMD_BASE (TX_BASE + TX_BUF_SIZE)
|
|
#define RX_BASE (CMD_BASE + CMD_MAP_SIZE)
|
|
#else
|
|
#define AX88180_MEMORY_SIZE 0x00010000
|
|
|
|
#define RX_BUF_SIZE 0x8000
|
|
#define TX_BUF_SIZE 0x7C00
|
|
|
|
#define RX_BASE 0x0000
|
|
#define TX_BASE (RX_BASE + RX_BUF_SIZE)
|
|
#define CMD_BASE (TX_BASE + TX_BUF_SIZE)
|
|
#endif
|
|
|
|
/* AX88180 Memory Mapping Definition */
|
|
#define RXBUFFER_START RX_BASE
|
|
#define RX_PACKET_LEN_OFFSET 0
|
|
#define RX_PAGE_NUM_MASK 0x7FF /* RX pages 0~7FFh */
|
|
#define TXBUFFER_START TX_BASE
|
|
|
|
/* AX88180 MAC Register Definition */
|
|
#define DECODE (0)
|
|
#define DECODE_EN 0x00000001
|
|
#define BASE (6)
|
|
#define CMD (CMD_BASE + 0x0000)
|
|
#define WAKEMOD 0x00000001
|
|
#define TXEN 0x00000100
|
|
#define RXEN 0x00000200
|
|
#define DEFAULT_CMD WAKEMOD
|
|
#define IMR (CMD_BASE + 0x0004)
|
|
#define IMR_RXBUFFOVR 0x00000001
|
|
#define IMR_WATCHDOG 0x00000002
|
|
#define IMR_TX 0x00000008
|
|
#define IMR_RX 0x00000010
|
|
#define IMR_PHY 0x00000020
|
|
#define CLEAR_IMR 0x00000000
|
|
#define DEFAULT_IMR (IMR_PHY | IMR_RX | IMR_TX |\
|
|
IMR_RXBUFFOVR | IMR_WATCHDOG)
|
|
#define ISR (CMD_BASE + 0x0008)
|
|
#define ISR_RXBUFFOVR 0x00000001
|
|
#define ISR_WATCHDOG 0x00000002
|
|
#define ISR_TX 0x00000008
|
|
#define ISR_RX 0x00000010
|
|
#define ISR_PHY 0x00000020
|
|
#define TXCFG (CMD_BASE + 0x0010)
|
|
#define AUTOPAD_CRC 0x00000050
|
|
#define DEFAULT_TXCFG AUTOPAD_CRC
|
|
#define TXCMD (CMD_BASE + 0x0014)
|
|
#define TXCMD_TXDP_MASK 0x00006000
|
|
#define TXCMD_TXDP0 0x00000000
|
|
#define TXCMD_TXDP1 0x00002000
|
|
#define TXCMD_TXDP2 0x00004000
|
|
#define TXCMD_TXDP3 0x00006000
|
|
#define TX_START_WRITE 0x00008000
|
|
#define TX_STOP_WRITE 0x00000000
|
|
#define DEFAULT_TXCMD 0x00000000
|
|
#define TXBS (CMD_BASE + 0x0018)
|
|
#define TXDP0_USED 0x00000001
|
|
#define TXDP1_USED 0x00000002
|
|
#define TXDP2_USED 0x00000004
|
|
#define TXDP3_USED 0x00000008
|
|
#define DEFAULT_TXBS 0x00000000
|
|
#define TXDES0 (CMD_BASE + 0x0020)
|
|
#define TXDPx_ENABLE 0x00008000
|
|
#define TXDPx_LEN_MASK 0x00001FFF
|
|
#define DEFAULT_TXDES0 0x00000000
|
|
#define TXDES1 (CMD_BASE + 0x0024)
|
|
#define TXDPx_ENABLE 0x00008000
|
|
#define TXDPx_LEN_MASK 0x00001FFF
|
|
#define DEFAULT_TXDES1 0x00000000
|
|
#define TXDES2 (CMD_BASE + 0x0028)
|
|
#define TXDPx_ENABLE 0x00008000
|
|
#define TXDPx_LEN_MASK 0x00001FFF
|
|
#define DEFAULT_TXDES2 0x00000000
|
|
#define TXDES3 (CMD_BASE + 0x002C)
|
|
#define TXDPx_ENABLE 0x00008000
|
|
#define TXDPx_LEN_MASK 0x00001FFF
|
|
#define DEFAULT_TXDES3 0x00000000
|
|
#define RXCFG (CMD_BASE + 0x0030)
|
|
#define RXBUFF_PROTECT 0x00000001
|
|
#define RXTCPCRC_CHECK 0x00000010
|
|
#define RXFLOW_ENABLE 0x00000100
|
|
#define DEFAULT_RXCFG RXBUFF_PROTECT
|
|
#define RXCURT (CMD_BASE + 0x0034)
|
|
#define DEFAULT_RXCURT 0x00000000
|
|
#define RXBOUND (CMD_BASE + 0x0038)
|
|
#define DEFAULT_RXBOUND 0x7FF /* RX pages 0~7FFh */
|
|
#define MACCFG0 (CMD_BASE + 0x0040)
|
|
#define MACCFG0_BIT3_0 0x00000007
|
|
#define IPGT_VAL 0x00000150
|
|
#define TXFLOW_ENABLE 0x00001000
|
|
#define SPEED100 0x00008000
|
|
#define DEFAULT_MACCFG0 (IPGT_VAL | MACCFG0_BIT3_0)
|
|
#define MACCFG1 (CMD_BASE + 0x0044)
|
|
#define RGMII_EN 0x00000002
|
|
#define RXFLOW_EN 0x00000020
|
|
#define FULLDUPLEX 0x00000040
|
|
#define MAX_JUMBO_LEN 0x00000780
|
|
#define RXJUMBO_EN 0x00000800
|
|
#define GIGA_MODE_EN 0x00001000
|
|
#define RXCRC_CHECK 0x00002000
|
|
#define RXPAUSE_DA_CHECK 0x00004000
|
|
|
|
#define JUMBO_LEN_4K 0x00000200
|
|
#define JUMBO_LEN_15K 0x00000780
|
|
#define DEFAULT_MACCFG1 (RXCRC_CHECK | RXPAUSE_DA_CHECK | \
|
|
RGMII_EN)
|
|
#define CICADA_DEFAULT_MACCFG1 (RXCRC_CHECK | RXPAUSE_DA_CHECK)
|
|
#define MACCFG2 (CMD_BASE + 0x0048)
|
|
#define MACCFG2_BIT15_8 0x00000100
|
|
#define JAM_LIMIT_MASK 0x000000FC
|
|
#define DEFAULT_JAM_LIMIT 0x00000064
|
|
#define DEFAULT_MACCFG2 MACCFG2_BIT15_8
|
|
#define MACCFG3 (CMD_BASE + 0x004C)
|
|
#define IPGR2_VAL 0x0000000E
|
|
#define IPGR1_VAL 0x00000600
|
|
#define NOABORT 0x00008000
|
|
#define DEFAULT_MACCFG3 (IPGR1_VAL | IPGR2_VAL)
|
|
#define TXPAUT (CMD_BASE + 0x0054)
|
|
#define DEFAULT_TXPAUT 0x001FE000
|
|
#define RXBTHD0 (CMD_BASE + 0x0058)
|
|
#define DEFAULT_RXBTHD0 0x00000300
|
|
#define RXBTHD1 (CMD_BASE + 0x005C)
|
|
#define DEFAULT_RXBTHD1 0x00000600
|
|
#define RXFULTHD (CMD_BASE + 0x0060)
|
|
#define DEFAULT_RXFULTHD 0x00000100
|
|
#define MISC (CMD_BASE + 0x0068)
|
|
/* Normal operation mode */
|
|
#define MISC_NORMAL 0x00000003
|
|
/* Clear bit 0 to reset MAC */
|
|
#define MISC_RESET_MAC 0x00000002
|
|
/* Clear bit 1 to reset PHY */
|
|
#define MISC_RESET_PHY 0x00000001
|
|
/* Clear bit 0 and 1 to reset MAC and PHY */
|
|
#define MISC_RESET_MAC_PHY 0x00000000
|
|
#define DEFAULT_MISC MISC_NORMAL
|
|
#define MACID0 (CMD_BASE + 0x0070)
|
|
#define MACID1 (CMD_BASE + 0x0074)
|
|
#define MACID2 (CMD_BASE + 0x0078)
|
|
#define TXLEN (CMD_BASE + 0x007C)
|
|
#define DEFAULT_TXLEN 0x000005FC
|
|
#define RXFILTER (CMD_BASE + 0x0080)
|
|
#define RX_RXANY 0x00000001
|
|
#define RX_MULTICAST 0x00000002
|
|
#define RX_UNICAST 0x00000004
|
|
#define RX_BROADCAST 0x00000008
|
|
#define RX_MULTI_HASH 0x00000010
|
|
#define DISABLE_RXFILTER 0x00000000
|
|
#define DEFAULT_RXFILTER (RX_BROADCAST + RX_UNICAST)
|
|
#define MDIOCTRL (CMD_BASE + 0x0084)
|
|
#define PHY_ADDR_MASK 0x0000001F
|
|
#define REG_ADDR_MASK 0x00001F00
|
|
#define READ_PHY 0x00004000
|
|
#define WRITE_PHY 0x00008000
|
|
#define MDIODP (CMD_BASE + 0x0088)
|
|
#define GPIOCTRL (CMD_BASE + 0x008C)
|
|
#define RXINDICATOR (CMD_BASE + 0x0090)
|
|
#define RX_START_READ 0x00000001
|
|
#define RX_STOP_READ 0x00000000
|
|
#define DEFAULT_RXINDICATOR RX_STOP_READ
|
|
#define TXST (CMD_BASE + 0x0094)
|
|
#define MDCCLKPAT (CMD_BASE + 0x00A0)
|
|
#define RXIPCRCCNT (CMD_BASE + 0x00A4)
|
|
#define RXCRCCNT (CMD_BASE + 0x00A8)
|
|
#define TXFAILCNT (CMD_BASE + 0x00AC)
|
|
#define PROMDP (CMD_BASE + 0x00B0)
|
|
#define PROMCTRL (CMD_BASE + 0x00B4)
|
|
#define RELOAD_EEPROM 0x00000200
|
|
#define MAXRXLEN (CMD_BASE + 0x00B8)
|
|
#define HASHTAB0 (CMD_BASE + 0x00C0)
|
|
#define HASHTAB1 (CMD_BASE + 0x00C4)
|
|
#define HASHTAB2 (CMD_BASE + 0x00C8)
|
|
#define HASHTAB3 (CMD_BASE + 0x00CC)
|
|
#define DOGTHD0 (CMD_BASE + 0x00E0)
|
|
#define DEFAULT_DOGTHD0 0x0000FFFF
|
|
#define DOGTHD1 (CMD_BASE + 0x00E4)
|
|
#define START_WATCHDOG_TIMER 0x00008000
|
|
#define DEFAULT_DOGTHD1 0x00000FFF
|
|
#define SOFTRST (CMD_BASE + 0x00EC)
|
|
#define SOFTRST_NORMAL 0x00000003
|
|
#define SOFTRST_RESET_MAC 0x00000002
|
|
|
|
/* Marvell 88E1111 Gigabit PHY Register Definition */
|
|
#define M88_SSR 0x0011
|
|
#define SSR_SPEED_MASK 0xC000
|
|
#define SSR_SPEED_1000 0x8000
|
|
#define SSR_SPEED_100 0x4000
|
|
#define SSR_SPEED_10 0x0000
|
|
#define SSR_DUPLEX 0x2000
|
|
#define SSR_MEDIA_RESOLVED_OK 0x0800
|
|
|
|
#define SSR_MEDIA_MASK (SSR_SPEED_MASK | SSR_DUPLEX)
|
|
#define SSR_1000FULL (SSR_SPEED_1000 | SSR_DUPLEX)
|
|
#define SSR_1000HALF SSR_SPEED_1000
|
|
#define SSR_100FULL (SSR_SPEED_100 | SSR_DUPLEX)
|
|
#define SSR_100HALF SSR_SPEED_100
|
|
#define SSR_10FULL (SSR_SPEED_10 | SSR_DUPLEX)
|
|
#define SSR_10HALF SSR_SPEED_10
|
|
#define M88_IER 0x0012
|
|
#define LINK_CHANGE_INT 0x0400
|
|
#define M88_ISR 0x0013
|
|
#define LINK_CHANGE_STATUS 0x0400
|
|
#define M88E1111_EXT_SCR 0x0014
|
|
#define RGMII_RXCLK_DELAY 0x0080
|
|
#define RGMII_TXCLK_DELAY 0x0002
|
|
#define DEFAULT_EXT_SCR (RGMII_TXCLK_DELAY | RGMII_RXCLK_DELAY)
|
|
#define M88E1111_EXT_SSR 0x001B
|
|
#define HWCFG_MODE_MASK 0x000F
|
|
#define RGMII_COPPER_MODE 0x000B
|
|
|
|
/* Marvell 88E1118 Gigabit PHY Register Definition */
|
|
#define M88E1118_CR 0x14
|
|
#define M88E1118_CR_RGMII_RXCLK_DELAY 0x0020
|
|
#define M88E1118_CR_RGMII_TXCLK_DELAY 0x0010
|
|
#define M88E1118_CR_DEFAULT (M88E1118_CR_RGMII_TXCLK_DELAY | \
|
|
M88E1118_CR_RGMII_RXCLK_DELAY)
|
|
#define M88E1118_LEDCTL 0x10 /* Reg 16 on page 3 */
|
|
#define M88E1118_LEDCTL_LED2INT 0x200
|
|
#define M88E1118_LEDCTL_LED2BLNK 0x400
|
|
#define M88E1118_LEDCTL_LED0DUALMODE1 0xc
|
|
#define M88E1118_LEDCTL_LED0DUALMODE2 0xd
|
|
#define M88E1118_LEDCTL_LED0DUALMODE3 0xe
|
|
#define M88E1118_LEDCTL_LED0DUALMODE4 0xf
|
|
#define M88E1118_LEDCTL_DEFAULT (M88E1118_LEDCTL_LED2BLNK | \
|
|
M88E1118_LEDCTL_LED0DUALMODE4)
|
|
|
|
#define M88E1118_LEDMIX 0x11 /* Reg 17 on page 3 */
|
|
#define M88E1118_LEDMIX_LED050 0x4
|
|
#define M88E1118_LEDMIX_LED150 0x8
|
|
|
|
#define M88E1118_PAGE_SEL 0x16 /* Reg page select */
|
|
|
|
/* CICADA CIS8201 Gigabit PHY Register Definition */
|
|
#define CIS_IMR 0x0019
|
|
#define CIS_INT_ENABLE 0x8000
|
|
#define CIS_LINK_CHANGE_INT 0x2000
|
|
#define CIS_ISR 0x001A
|
|
#define CIS_INT_PENDING 0x8000
|
|
#define CIS_LINK_CHANGE_STATUS 0x2000
|
|
#define CIS_AUX_CTRL_STATUS 0x001C
|
|
#define CIS_AUTONEG_COMPLETE 0x8000
|
|
#define CIS_SPEED_MASK 0x0018
|
|
#define CIS_SPEED_1000 0x0010
|
|
#define CIS_SPEED_100 0x0008
|
|
#define CIS_SPEED_10 0x0000
|
|
#define CIS_DUPLEX 0x0020
|
|
|
|
#define CIS_MEDIA_MASK (CIS_SPEED_MASK | CIS_DUPLEX)
|
|
#define CIS_1000FULL (CIS_SPEED_1000 | CIS_DUPLEX)
|
|
#define CIS_1000HALF CIS_SPEED_1000
|
|
#define CIS_100FULL (CIS_SPEED_100 | CIS_DUPLEX)
|
|
#define CIS_100HALF CIS_SPEED_100
|
|
#define CIS_10FULL (CIS_SPEED_10 | CIS_DUPLEX)
|
|
#define CIS_10HALF CIS_SPEED_10
|
|
#define CIS_SMI_PRIORITY 0x0004
|
|
|
|
static inline unsigned short INW (struct eth_device *dev, unsigned long addr)
|
|
{
|
|
return le16_to_cpu(readw(addr + (void *)dev->iobase));
|
|
}
|
|
|
|
/*
|
|
Access RXBUFFER_START/TXBUFFER_START to read RX buffer/write TX buffer
|
|
*/
|
|
#if defined (CONFIG_DRIVER_AX88180_16BIT)
|
|
static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr)
|
|
{
|
|
writew(cpu_to_le16(command), addr + (void *)dev->iobase);
|
|
}
|
|
|
|
static inline unsigned short READ_RXBUF (struct eth_device *dev)
|
|
{
|
|
return le16_to_cpu(readw(RXBUFFER_START + (void *)dev->iobase));
|
|
}
|
|
|
|
static inline void WRITE_TXBUF (struct eth_device *dev, unsigned short data)
|
|
{
|
|
writew(cpu_to_le16(data), TXBUFFER_START + (void *)dev->iobase);
|
|
}
|
|
#else
|
|
static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr)
|
|
{
|
|
writel(cpu_to_le32(command), addr + (void *)dev->iobase);
|
|
}
|
|
|
|
static inline unsigned long READ_RXBUF (struct eth_device *dev)
|
|
{
|
|
return le32_to_cpu(readl(RXBUFFER_START + (void *)dev->iobase));
|
|
}
|
|
|
|
static inline void WRITE_TXBUF (struct eth_device *dev, unsigned long data)
|
|
{
|
|
writel(cpu_to_le32(data), TXBUFFER_START + (void *)dev->iobase);
|
|
}
|
|
#endif
|
|
|
|
#endif /* _AX88180_H_ */
|