u-boot/include/configs/ms7720se.h
Adam Ford 2fe88d4522 Convert CONFIG_FLASH_CFI_DRIVER et al to Kconfig
This converts the following to Kconfig:
   CONFIG_FLASH_CFI_DRIVER
   CONFIG_SYS_FLASH_USE_BUFFER_WRITE
   CONFIG_FLASH_CFI_MTD
   CONFIG_SYS_FLASH_PROTECTION
   CONFIG_SYS_FLASH_CFI

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Re-migrate]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-19 19:19:50 -04:00

83 lines
2.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Configuation settings for the Hitachi Solution Engine 7720
*
* Copyright (C) 2007 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
*/
#ifndef __MS7720SE_H
#define __MS7720SE_H
#define CONFIG_CPU_SH7720 1
#define CONFIG_BOOTFILE "/boot/zImage"
#define CONFIG_LOADADDR 0x8E000000
#define CONFIG_DISPLAY_BOARDINFO
#undef CONFIG_SHOW_BOOT_PROGRESS
/* MEMORY */
#define MS7720SE_SDRAM_BASE 0x8C000000
#define MS7720SE_FLASH_BASE_1 0xA0000000
#define MS7720SE_FLASH_BANK_SIZE (8 * 1024 * 1024)
#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */
/* List of legal baudrate settings for this board */
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
#define CONFIG_CONS_SCIF0 1
#define CONFIG_SYS_MEMTEST_START MS7720SE_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
#define CONFIG_SYS_SDRAM_BASE MS7720SE_SDRAM_BASE
#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
#define CONFIG_SYS_MONITOR_BASE MS7720SE_FLASH_BASE_1
#define CONFIG_SYS_MONITOR_LEN (128 * 1024)
#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
/* FLASH */
#undef CONFIG_SYS_FLASH_QUIET_TEST
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#define CONFIG_SYS_FLASH_BASE MS7720SE_FLASH_BASE_1
#define CONFIG_SYS_MAX_FLASH_SECT 150
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000
#define CONFIG_SYS_FLASH_WRITE_TOUT 500
/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 33333333
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
/* PCMCIA */
#define CONFIG_IDE_PCMCIA 1
#define CONFIG_MARUBUN_PCCARD 1
#define CONFIG_PCMCIA_SLOT_A 1
#define CONFIG_SYS_IDE_MAXDEVICE 1
#define CONFIG_SYS_MARUBUN_MRSHPC 0xb83fffe0
#define CONFIG_SYS_MARUBUN_MW1 0xb8400000
#define CONFIG_SYS_MARUBUN_MW2 0xb8500000
#define CONFIG_SYS_MARUBUN_IO 0xb8600000
#define CONFIG_SYS_PIO_MODE 1
#define CONFIG_SYS_IDE_MAXBUS 1
#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_MARUBUN_IO /* base address */
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */
#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* data reg offset */
#define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */
#define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */
#define CONFIG_IDE_SWAP_IO
#endif /* __MS7720SE_H */