27b207fd0a
applications: instead of using (PPC-specific) system calls we now use a jump table; please see doc/README.standalone for details * Patch by Dave Westwood, 24 Jul 2003: added support for Unity OS (a proprietary OS)
303 lines
9.0 KiB
C
303 lines
9.0 KiB
C
/*
|
|
* (C) Copyright 2002
|
|
* Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* board/config.h - configuration options, board specific
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
|
|
#define CONFIG_MPC824X 1
|
|
#define CONFIG_MPC8240 1
|
|
#define CONFIG_PN62 1
|
|
|
|
#define CONFIG_CONS_INDEX 1
|
|
|
|
|
|
#define REMOVE_COMMANDS ( CFG_CMD_AUTOSCRIPT | \
|
|
CFG_CMD_LOADS | \
|
|
CFG_CMD_ENV | \
|
|
CFG_CMD_FLASH | \
|
|
CFG_CMD_IMLS )
|
|
|
|
#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL & ~REMOVE_COMMANDS) |\
|
|
CFG_CMD_PCI |\
|
|
CFG_CMD_BSP)
|
|
|
|
#define CONFIG_BAUDRATE 19200 /* console baudrate */
|
|
|
|
#define CONFIG_BOOTDELAY 1 /* autoboot after n seconds */
|
|
|
|
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
|
|
|
|
#define CONFIG_SERVERIP 10.0.0.201
|
|
#define CONFIG_IPADDR 10.0.0.200
|
|
#define CONFIG_ROOTPATH /opt/eldk/ppc_82xx
|
|
#define CONFIG_NETMASK 255.255.255.0
|
|
#undef CONFIG_BOOTARGS
|
|
#if 0
|
|
/* Boot Linux with NFS root filesystem */
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"setenv verify y;" \
|
|
"setenv bootargs console=ttyS0,19200 mem=31M quiet " \
|
|
"root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
|
|
"ip=$(ipaddr):$(serverip)::$(netmask):pn62:eth0:off;" \
|
|
"loadp 100000; bootm"
|
|
/* "tftpboot 100000 uImage; bootm" */
|
|
#else
|
|
/* Boot Linux with RAMdisk based filesystem (initrd, BusyBox) */
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"setenv verify n;" \
|
|
"setenv bootargs console=ttyS0,19200 mem=31M quiet " \
|
|
"root=/dev/ram rw " \
|
|
"ip=$(ipaddr):$(serverip)::$(netmask):pn62:eth0:off;" \
|
|
"loadp 200000; bootm"
|
|
#endif
|
|
|
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
|
#include <cmd_confdefs.h>
|
|
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP 1 /* undef to save memory */
|
|
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
#define CFG_LOAD_ADDR 0x00100000 /* default load address */
|
|
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
|
|
|
#define CONFIG_PRAM 1024 /* reserve 1 MB protected RAM */
|
|
|
|
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() on init */
|
|
|
|
#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */
|
|
|
|
/*
|
|
* PCI stuff
|
|
*/
|
|
#define CONFIG_PCI /* include pci support */
|
|
#define CONFIG_PCI_PNP /* we need Plug 'n Play */
|
|
#if 0
|
|
#define CONFIG_PCI_SCAN_SHOW /* show PCI auto-scan at boot */
|
|
#endif
|
|
|
|
/*
|
|
* Networking stuff
|
|
*/
|
|
#define CONFIG_NET_MULTI /* Multi ethernet cards support */
|
|
|
|
#define CONFIG_PCNET /* there are 2 AMD PCnet 79C973 */
|
|
#define CONFIG_PCNET_79C973
|
|
|
|
#define _IO_BASE 0xfe000000 /* points to PCI I/O space */
|
|
|
|
|
|
/*
|
|
* Start addresses for the final memory configuration
|
|
* (Set up by the startup code)
|
|
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CFG_SDRAM_BASE 0x00000000
|
|
#define CFG_MAX_RAM_SIZE 0x10000000
|
|
|
|
#define CFG_RESET_ADDRESS 0xfff00100
|
|
|
|
#undef CFG_RAMBOOT
|
|
#define CFG_MONITOR_LEN 0x00030000
|
|
#define CFG_MONITOR_BASE TEXT_BASE
|
|
|
|
/*#define CFG_GBL_DATA_SIZE 256*/
|
|
#define CFG_GBL_DATA_SIZE 128
|
|
|
|
#define CFG_INIT_RAM_ADDR 0x40000000
|
|
#define CFG_INIT_RAM_END 0x1000
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
|
|
|
|
#define CFG_NO_FLASH 1 /* There is no FLASH memory */
|
|
|
|
#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
|
|
#define CFG_ENV_OFFSET 0x00004000 /* Offset of Environment Sector */
|
|
#define CFG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */
|
|
|
|
#define CFG_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
|
|
|
|
#define CFG_MEMTEST_START 0x00004000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0x01f00000 /* 0 ... 32 MB in DRAM */
|
|
|
|
/*
|
|
* Serial port configuration
|
|
*/
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
#define CFG_NS16550
|
|
#define CFG_NS16550_SERIAL
|
|
|
|
#define CFG_NS16550_REG_SIZE 1
|
|
|
|
#define CFG_NS16550_CLK 1843200
|
|
|
|
#define CFG_NS16550_COM1 0xff800008
|
|
#define CFG_NS16550_COM2 0xff800000
|
|
|
|
/*
|
|
* Low Level Configuration Settings
|
|
* (address mappings, register initial values, etc.)
|
|
* You should know what you are doing if you make changes here.
|
|
*/
|
|
|
|
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
|
|
#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 3
|
|
|
|
#define CFG_EUMB_ADDR 0xFCE00000
|
|
|
|
/* MCCR1 */
|
|
#define CFG_ROMNAL 3 /* rom/flash next access time */
|
|
#define CFG_ROMFAL 7 /* rom/flash access time */
|
|
|
|
/* MCCR2 */
|
|
#define CFG_ASRISE 6 /* ASRISE in clocks */
|
|
#define CFG_ASFALL 12 /* ASFALL in clocks */
|
|
#define CFG_REFINT 5600 /* REFINT in clocks */
|
|
|
|
/* MCCR3 */
|
|
#define CFG_BSTOPRE 0x3cf /* Burst To Precharge */
|
|
#define CFG_REFREC 2 /* Refresh to activate interval */
|
|
#define CFG_RDLAT 3 /* data latency from read command */
|
|
|
|
/* MCCR4 */
|
|
#define CFG_PRETOACT 1 /* Precharge to activate interval */
|
|
#define CFG_ACTTOPRE 3 /* Activate to Precharge interval */
|
|
#define CFG_ACTORW 2 /* Activate to R/W */
|
|
#define CFG_SDMODE_CAS_LAT 2 /* SDMODE CAS latency */
|
|
#define CFG_SDMODE_WRAP 0 /* SDMODE Wrap type */
|
|
#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length 2=4, 3=8 */
|
|
#define CFG_REGISTERD_TYPE_BUFFER 1
|
|
|
|
/* Memory bank settings:
|
|
*
|
|
* only bits 20-29 are actually used from these vales to set the
|
|
* start/qend address the upper two bits will be 0, and the lower 20
|
|
* bits will be set to 0x00000 for a start address, or 0xfffff for an
|
|
* end address
|
|
*/
|
|
#define CFG_BANK0_START 0x00000000
|
|
#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
|
|
#define CFG_BANK0_ENABLE 1
|
|
#define CFG_BANK1_START 0x00000000
|
|
#define CFG_BANK1_END 0x00000000
|
|
#define CFG_BANK1_ENABLE 0
|
|
#define CFG_BANK2_START 0x00000000
|
|
#define CFG_BANK2_END 0x00000000
|
|
#define CFG_BANK2_ENABLE 0
|
|
#define CFG_BANK3_START 0x00000000
|
|
#define CFG_BANK3_END 0x00000000
|
|
#define CFG_BANK3_ENABLE 0
|
|
#define CFG_BANK4_START 0x00000000
|
|
#define CFG_BANK4_END 0x00000000
|
|
#define CFG_BANK4_ENABLE 0
|
|
#define CFG_BANK5_START 0x00000000
|
|
#define CFG_BANK5_END 0x00000000
|
|
#define CFG_BANK5_ENABLE 0
|
|
#define CFG_BANK6_START 0x00000000
|
|
#define CFG_BANK6_END 0x00000000
|
|
#define CFG_BANK6_ENABLE 0
|
|
#define CFG_BANK7_START 0x00000000
|
|
#define CFG_BANK7_END 0x00000000
|
|
#define CFG_BANK7_ENABLE 0
|
|
|
|
/*
|
|
* Memory bank enable bitmask, specifying which of the banks defined above
|
|
* are actually present. MSB is for bank #7, LSB is for bank #0.
|
|
*/
|
|
#define CFG_BANK_ENABLE 0x01
|
|
|
|
#define CFG_ODCR 0xff /* configures line driver impedances, */
|
|
/* see 8240 book for bit definitions */
|
|
#define CFG_PGMAX 0x32 /* how long the 8240 retains the */
|
|
/* currently accessed page in memory */
|
|
/* see 8240 book for details */
|
|
|
|
/* SDRAM 0 - 256MB */
|
|
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
|
|
|
|
/* PCI memory space */
|
|
#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
|
|
#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
/* Config addrs, etc */
|
|
#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
|
|
#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
#define CFG_DBAT0L CFG_IBAT0L
|
|
#define CFG_DBAT0U CFG_IBAT0U
|
|
#define CFG_DBAT1L CFG_IBAT1L
|
|
#define CFG_DBAT1U CFG_IBAT1U
|
|
#define CFG_DBAT2L CFG_IBAT2L
|
|
#define CFG_DBAT2U CFG_IBAT2U
|
|
#define CFG_DBAT3L CFG_IBAT3L
|
|
#define CFG_DBAT3U CFG_IBAT3U
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
/*
|
|
* Cache Configuration
|
|
*/
|
|
#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Internal Definitions
|
|
*
|
|
* Boot Flags
|
|
*/
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
|
|
#endif /* __CONFIG_H */
|