358 lines
10 KiB
C
358 lines
10 KiB
C
/*
|
|
* (C) Copyright 2002
|
|
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
|
|
*
|
|
* (C) Copyright 2002
|
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
*
|
|
* Copied from lubbock.h
|
|
*
|
|
* (C) Copyright 2004
|
|
* BEC Systems <http://bec-systems.com>
|
|
* Cliff Brake <cliff.brake@gmail.com>
|
|
* Configuation settings for the Accelent/Vibren PXA255 IDP
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <asm/arch/pxa-regs.h>
|
|
|
|
/*
|
|
* If we are developing, we might want to start U-Boot from RAM
|
|
* so we MUST NOT initialize critical regs like mem-timing ...
|
|
*/
|
|
#undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */
|
|
#undef CONFIG_SKIP_RELOCATE_UBOOT /* define for developing */
|
|
|
|
/*
|
|
* define the following to enable debug blinks. A debug blink function
|
|
* must be defined in memsetup.S
|
|
*/
|
|
#undef DEBUG_BLINK_ENABLE
|
|
#undef DEBUG_BLINKC_ENABLE
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
|
|
|
|
#undef CONFIG_LCD
|
|
#ifdef CONFIG_LCD
|
|
#define CONFIG_SHARP_LM8V31
|
|
#endif
|
|
|
|
#define CONFIG_MMC 1
|
|
#define CONFIG_DOS_PARTITION 1
|
|
#define BOARD_LATE_INIT 1
|
|
|
|
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
|
|
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
|
|
/*
|
|
* PXA250 IDP memory map information
|
|
*/
|
|
|
|
#define IDP_CS5_ETH_OFFSET 0x03400000
|
|
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_DRIVER_SMC91111
|
|
#define CONFIG_SMC91111_BASE (PXA_CS5_PHYS + IDP_CS5_ETH_OFFSET + 0x300)
|
|
#define CONFIG_SMC_USE_32_BIT 1
|
|
/* #define CONFIG_SMC_USE_IOFUNCS */
|
|
|
|
/* the following has to be set high -- suspect something is wrong with
|
|
* with the tftp timeout routines. FIXME!!!
|
|
*/
|
|
#define CONFIG_NET_RETRY_COUNT 100
|
|
|
|
/*
|
|
* select serial console configuration
|
|
*/
|
|
#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_DHCP
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
#define CONFIG_BOOTCOMMAND "bootm 40000"
|
|
#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
/* #define CONFIG_INITRD_TAG 1 */
|
|
|
|
/*
|
|
* Current memory map for Vibren supplied Linux images:
|
|
*
|
|
* Flash:
|
|
* 0 - 0x3ffff (size = 0x40000): bootloader
|
|
* 0x40000 - 0x13ffff (size = 0x100000): kernel
|
|
* 0x140000 - 0x1f3ffff (size = 0x1e00000): jffs
|
|
*
|
|
* RAM:
|
|
* 0xa0008000 - kernel is loaded
|
|
* 0xa3000000 - Uboot runs (48MB into RAM)
|
|
*
|
|
*/
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"prog_boot_mmc=" \
|
|
"mw.b 0xa0000000 0xff 0x40000; " \
|
|
"if mmcinit && " \
|
|
"fatload mmc 0 0xa0000000 u-boot.bin; " \
|
|
"then " \
|
|
"protect off 0x0 0x3ffff; " \
|
|
"erase 0x0 0x3ffff; " \
|
|
"cp.b 0xa0000000 0x0 0x40000; " \
|
|
"reset;" \
|
|
"fi\0" \
|
|
"prog_uzImage_mmc=" \
|
|
"mw.b 0xa0000000 0xff 0x100000; " \
|
|
"if mmcinit && " \
|
|
"fatload mmc 0 0xa0000000 uzImage; " \
|
|
"then " \
|
|
"protect off 0x40000 0xfffff; " \
|
|
"erase 0x40000 0xfffff; " \
|
|
"cp.b 0xa0000000 0x40000 0x100000; " \
|
|
"fi\0" \
|
|
"prog_jffs_mmc=" \
|
|
"mw.b 0xa0000000 0xff 0x1e00000; " \
|
|
"if mmcinit && " \
|
|
"fatload mmc 0 0xa0000000 root.jffs; " \
|
|
"then " \
|
|
"protect off 0x140000 0x1f3ffff; " \
|
|
"erase 0x140000 0x1f3ffff; " \
|
|
"cp.b 0xa0000000 0x140000 0x1e00000; " \
|
|
"fi\0" \
|
|
"boot_mmc=" \
|
|
"if mmcinit && " \
|
|
"fatload mmc 0 0xa1000000 uzImage && " \
|
|
"then " \
|
|
"bootm 0xa1000000; " \
|
|
"fi\0" \
|
|
"prog_boot_net=" \
|
|
"mw.b 0xa0000000 0xff 0x100000; " \
|
|
"if bootp 0xa0000000 u-boot.bin; " \
|
|
"then " \
|
|
"protect off 0x0 0x3ffff; " \
|
|
"erase 0x0 0x3ffff; " \
|
|
"cp.b 0xa0000000 0x0 0x40000; " \
|
|
"reset; " \
|
|
"fi\0" \
|
|
"prog_uzImage_net=" \
|
|
"mw.b 0xa0000000 0xff 0x100000; " \
|
|
"if bootp 0xa0000000 uzImage; " \
|
|
"then " \
|
|
"protect off 0x40000 0xfffff; " \
|
|
"erase 0x40000 0xfffff; " \
|
|
"cp.b 0xa0000000 0x40000 0x100000; " \
|
|
"fi\0" \
|
|
"prog_jffs_net=" \
|
|
"mw.b 0xa0000000 0xff 0x1e00000; " \
|
|
"if bootp 0xa0000000 root.jffs; " \
|
|
"then " \
|
|
"protect off 0x140000 0x1f3ffff; " \
|
|
"erase 0x140000 0x1f3ffff; " \
|
|
"cp.b 0xa0000000 0x140000 0x1e00000; " \
|
|
"fi\0"
|
|
|
|
|
|
/* "erase_env=" */
|
|
/* "protect off" */
|
|
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
|
|
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
|
#endif
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_HUSH_PARSER 1
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
|
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#ifdef CONFIG_SYS_HUSH_PARSER
|
|
#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */
|
|
#else
|
|
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
|
|
#endif
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
#define CONFIG_SYS_DEVICE_NULLDEV 1
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
|
|
|
|
#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0xa0800000 /* default load address */
|
|
|
|
#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
|
|
#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */
|
|
|
|
#define RTC 1 /* enable 32KHz osc */
|
|
|
|
/* valid baudrates */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
#define CONFIG_SYS_MMC_BASE 0xF0000000
|
|
|
|
/*
|
|
* Stack sizes
|
|
*
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
|
|
#ifdef CONFIG_USE_IRQ
|
|
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
|
|
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
|
|
#endif
|
|
|
|
/*
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 4 /* we have 1 banks of DRAM */
|
|
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
|
|
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
|
|
#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
|
|
#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
|
|
#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
|
|
#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
|
|
#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
|
|
#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
|
|
|
|
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
|
|
#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
|
|
#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
|
|
#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
|
|
#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
|
|
|
|
#define CONFIG_SYS_DRAM_BASE 0xa0000000
|
|
#define CONFIG_SYS_DRAM_SIZE 0x04000000
|
|
|
|
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
|
|
|
/*
|
|
* GPIO settings
|
|
*/
|
|
|
|
#define CONFIG_SYS_GAFR0_L_VAL 0x80001005
|
|
#define CONFIG_SYS_GAFR0_U_VAL 0xa5128012
|
|
#define CONFIG_SYS_GAFR1_L_VAL 0x699a9558
|
|
#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5aa6a
|
|
#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
|
|
#define CONFIG_SYS_GAFR2_U_VAL 0x2
|
|
#define CONFIG_SYS_GPCR0_VAL 0x1800400
|
|
#define CONFIG_SYS_GPCR1_VAL 0x0
|
|
#define CONFIG_SYS_GPCR2_VAL 0x0
|
|
#define CONFIG_SYS_GPDR0_VAL 0xc1818440
|
|
#define CONFIG_SYS_GPDR1_VAL 0xfcffab82
|
|
#define CONFIG_SYS_GPDR2_VAL 0x1ffff
|
|
#define CONFIG_SYS_GPSR0_VAL 0x8000
|
|
#define CONFIG_SYS_GPSR1_VAL 0x3f0002
|
|
#define CONFIG_SYS_GPSR2_VAL 0x1c000
|
|
|
|
#define CONFIG_SYS_PSSR_VAL 0x20
|
|
|
|
/*
|
|
* Memory settings
|
|
*/
|
|
#define CONFIG_SYS_MSC0_VAL 0x29DCA4D2
|
|
#define CONFIG_SYS_MSC1_VAL 0x43AC494C
|
|
#define CONFIG_SYS_MSC2_VAL 0x39D449D4
|
|
#define CONFIG_SYS_MDCNFG_VAL 0x090009C9
|
|
#define CONFIG_SYS_MDREFR_VAL 0x0085C017
|
|
#define CONFIG_SYS_MDMRS_VAL 0x00220022
|
|
|
|
/*
|
|
* PCMCIA and CF Interfaces
|
|
*/
|
|
#define CONFIG_SYS_MECR_VAL 0x00000003
|
|
#define CONFIG_SYS_MCMEM0_VAL 0x00014405
|
|
#define CONFIG_SYS_MCMEM1_VAL 0x00014405
|
|
#define CONFIG_SYS_MCATT0_VAL 0x00014405
|
|
#define CONFIG_SYS_MCATT1_VAL 0x00014405
|
|
#define CONFIG_SYS_MCIO0_VAL 0x00014405
|
|
#define CONFIG_SYS_MCIO1_VAL 0x00014405
|
|
|
|
/*
|
|
* FLASH and environment organization
|
|
*/
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_FLASH_CFI_DRIVER 1
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE 0
|
|
#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
|
|
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
|
|
|
|
/* timeout values are in ticks */
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
|
|
|
|
/* put cfg at end of flash for now */
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
/* Addr of Environment Sector */
|
|
#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000)
|
|
#define CONFIG_ENV_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */
|
|
#define CONFIG_ENV_SECT_SIZE (PHYS_FLASH_SECT_SIZE / 16)
|
|
|
|
#endif /* __CONFIG_H */
|